Engineered polyethylene terephthalate hydrolases: perspectives and limits.

Polyethylene terephthalate (PET) is a major component of plastic waste. Enzymatic PET hydrolysis is the most ecofriendly recycling technology. The biorecycling of PET waste requires the complete depolymerization of PET to terephthalate and ethylene glycol. The history of enzymatic PET depolymerization has revealed two critical issues for the industrial depolymerization of PET: industrially available PET hydrolases and pretreatment of PET waste to make it susceptible to full enzymatic hydrolysis. As none of the wild-type enzymes can satisfy the requirements for industrialization, various mutational improvements have been performed, through classical technology to state-of-the-art computational/machine-learning technology. Recent engineering studies on PET hydrolases have brought a new insight that flexibility of the substrate-binding groove may improve the efficiency of PET hydrolysis while maintaining sufficient thermostability, although the previous studies focused only on enzymatic thermostability above the glass transition temperature of PET. Industrial biorecycling of PET waste is scheduled to be implemented, using micronized amorphous PET. Next stage must be the development of PET hydrolases that can efficiently degrade crystalline parts of PET and expansion of target PET materials, not only bottles but also textiles, packages, and microplastics. This review discusses the current status of PET hydrolases, their potential applications, and their profespectal goals. KEY POINTS: • PET hydrolases must be thermophilic, but their operation must be below 70 °C • Classical and state-of-the-art engineering approaches are useful for PET hydrolases • Enzyme activity on crystalline PET is most expected for future PET biorecycling.

Trends in in-silico guided engineering of efficient polyethylene terephthalate (PET) hydrolyzing enzymes to enable bio-recycling and upcycling of PET.

Polyethylene terephthalate (PET) is the largest produced polyester globally, and less than 30% of all the PET produced globally (∼6 billion pounds annually) is currently recycled into lower-quality products. The major drawbacks in current recycling methods (mechanical and chemical), have inspired the exploration of potentially efficient and sustainable PET depolymerization using biological approaches. Researchers have discovered efficient PET hydrolyzing enzymes in the plastisphere and have demonstrated the selective degradation of PET to original monomers thus enabling biological recycling or upcycling. However, several significant hurdles such as the less efficiency of the hydrolytic reaction, low thermostability of the enzymes, and the inability of the enzyme to depolymerize crystalline PET must be addressed in order to establish techno-economically feasible commercial-scale biological PET recycling or upcycling processes. Researchers leverage a synthetic biology-based design; build, test, and learn (DBTL) methodology to develop commercially applicable efficient PET hydrolyzing enzymes through 1) high-throughput metagenomic and proteomic approaches to discover new PET hydrolyzing enzymes with superior properties: and, 2) enzyme engineering approaches to modify and optimize PET hydrolyzing properties. Recently, in-silico platforms including molecular mechanics and machine learning concepts are emerging as innovative tools for the development of more efficient and effective PET recycling through the exploration of novel mutations in PET hydrolyzing enzymes. In-silico-guided PET hydrolyzing enzyme engineering with DBTL cycles enables the rapid development of efficient variants of enzymes over tedious conventional enzyme engineering methods such as random or directed evolution. This review highlights the potential of in-silico-guided PET degrading enzyme engineering to create more efficient variants, including Ideonella sakaiensis PETase (IsPETase) and leaf-branch compost cutinases (LCC). Furthermore, future research prospects are discussed to enable a sustainable circular economy through the bioconversion of PET to original or high-value platform chemicals.

Purification and biochemical characterization of SM14est, a PET-hydrolyzing enzyme from the marine sponge-derived Streptomyces sp. SM14.

The successful enzymatic degradation of polyester substrates has fueled worldwide investigation into the treatment of plastic waste using bio-based processes. Within this realm, marine-associated microorganisms have emerged as a promising source of polyester-degrading enzymes. In this work, we describe the hydrolysis of the synthetic polymer PET by SM14est, a polyesterase which was previously identified from Streptomyces sp. SM14, an isolate of the marine sponge Haliclona simulans. The PET hydrolase activity of purified SM14est was assessed using a suspension-based assay and subsequent analysis of reaction products by UV-spectrophotometry and RP-HPLC. SM14est displayed a preference for high salt conditions, with activity significantly increasing at sodium chloride concentrations from 100 mM up to 1,000 mM. The initial rate of PET hydrolysis by SM14est was determined to be 0.004 s-1 at 45°C, which was increased by 5-fold to 0.02 s-1 upon addition of 500 mM sodium chloride. Sequence alignment and structural comparison with known PET hydrolases, including the marine halophile PET6, and the highly efficient, thermophilic PHL7, revealed conserved features of interest. Based on this work, SM14est emerges as a useful enzyme that is more similar to key players in the area of PET hydrolysis, like PHL7 and IsPETase, than it is to its marine counterparts. Salt-tolerant polyesterases such as SM14est are potentially valuable in the biological degradation of plastic particles that readily contaminate marine ecosystems and industrial wastewaters.

Thermoactive metallo-keratinase from Bacillus sp. NFH5: Characterization, structural elucidation, and potential application as detergent additive.

In recent times, robust green technological developments have advanced the goal of a circular economy by minimizing waste generation. The study was undertaken to explore the keratinolytic activity of chicken feather-degrading bacteria from South African soil. Isolates coded as SSN-01 and HSN-01 were identified as Bacillus sp. NFH5 and Bacillus sp. FHNM and their sequences were deposited in GenBank, with accession numbers MW165830.1 and MW165831.1, respectively. Extracellular enzyme production and thiol group generation by Bacillus sp. NFH5 peaked at 120 h with 1879.09 ± 88.70 U/mL and 9.49 ± 0.78 mM, respectively. Glutamic acid (4.44%), aspartic acid (3.50%), arginine (3.23%), glycine (2.61%), serine (2.08%), and proline (2.08%) were relatively higher in concentration. Keratinase (KerBAN) activity was highest at pH 8.0 and 90 °C but was inhibited by both EDTA and 1,10-phenanthroline. In addition, the keratinase-encoding gene (kerBAN) accessioned OK033360 had 362 amino acid residues, with molecular weight and theoretical isoelectric point of 39 kDa and 8.81, respectively. Findings from this study highlight the significance of Bacillus sp. NFH5 in the bio-recycling of recalcitrant keratinous wastes to protein hydrolysates - potential dietary supplements for livestock feeds. The properties of KerBAN underscore its application potential in green biotechnological processes.

Chryseobacterium aquifrigidense keratinase liberated essential and nonessential amino acids from chicken feather degradation.

Keratinous biomass valorization for value-added products presents a high prospect in ecological management and the advancement of the bio-economy. Consequently, soil samples from the poultry dumpsite were collected. The bacteria isolated on the basal salt medium were screened for keratinolytic activity. The potent chicken feathers degrading bacteria were identified through 16S rRNA gene sequencing and phylogenetic analysis. Fermentation process conditions were optimized, and the amino acid compositions of the feather hydrolysate were likewise quantified. Ten (10) proteolytic bacteria evaluated on skimmed milk agar showed intact chicken feather degradation ranging from 33% (WDS-03) to 88% (FPS-09). The extracellular keratinase activity ranged from 224.52 ± 42.46 U/mL (WDS-03) to 834.55 ± 66.86 U/mL (FPS-07). Based on 16S rRNA gene sequencing and phylogenetic analysis, the most potent keratinolytic isolates coded as FPS-07, FPS-09, FPS-01, and WDS-06 were identified as Chryseobacterium aquifrigidense FANN1, Chryseobacterium aquifrigidense FANN2, Stenotrophomonas maltophilia ANNb, and Bacillus sp. ANNa, respectively. C aquifrigidense FANN2 maximally produced keratinase (1460.90 ± 26.99 U/mL) at 72 h of incubation under optimal process conditions of pH (6), inoculum side (5%; v/v), temperature (30°C), and chicken feather (25 g/L). The feather hydrolysate showed a protein value of 67.54%, with a relative abundance of arginine (2.84%), serine (3.14%), aspartic acid (3.33%), glutamic acid (3.73%), and glycine (2.81%). C. aquifrigidense FANN2 yielded high keratinase titre and dismembered chicken feathers into amino acids-rich hydrolysate, highlighting its significance in the beneficiation of recalcitrant keratinous wastes into dietary proteins as potential livestock feed supplements.

Comparative e-waste plastics biodegradation efficacy of monoculture Pseudomonas aeruginosa strain PE10 and bacterial consortium under in situ condition.

A significant amount of electronic obsoletes or electronic waste (e-waste) is being generated globally each year; of these, ~20% of obsolete electronic items have plastic components. Current remediation practices for e-waste have several setbacks due to its negative impact on the environment, agro-ecosystem, and human health. Therefore, comparative biodegradation studies of e-waste plastics by monoculture Pseudomonas aeruginosa strain PE10 and bacterial consortium consisting of Achromobacter insolitus strain PE2 (MF943156), Acinetobacter nosocomialis strain PE5 (MF943157), Pseudomonas lalkuanensis PE8 (CP043311), and Stenotrophomonas pavanii strain PE15 (MF943160) were carried out in situ. Biological treatment of e-waste with these candidates in soil ecosystems has been analyzed through diversified analytical techniques such as Fourier transform infrared spectroscopy (FTIR), thermogravimetric-derivative thermogravimetry-differential thermal analysis (TG-DTG-DTA), and scanning electron microscopy (SEM). Both P. aeruginosa strain PE10 and the bacterial consortium have a tremendous ability to accelerate the biodegradation process in the natural environment. However, FTIR analysis implied that the monoculture had better efficacy than the consortium, and it was consistent until the incubation period used for the study. Some polymeric bonds such as ν C=C and δ C-H were completely removed, and ν C=C ring stretching, νasym C-O-C, νsym C-H, etc. were introduced by strain PE10. Furthermore, thermal analysis results validated the structural deterioration of e-waste as the treated samples showed nearly two-fold weight loss (WL; 6.8%) than the untreated control (3.1%) at comparatively lower temperatures. SEM images provided the details of surface disintegrations. Conclusively, individual monoculture P. aeruginosa strain PE10 could be explored for e-waste bio-recycling in agricultural soil ecosystems thereby reducing the cost, time, and management of bioformulation in addition to hazardous pollutant reduction.

Synthesis, characterization and biodegradation studies of polyurethanes: Effect of unsaturation on biodegradability.

The presence of unsaturation in the main chain of the polymer promotes the biodegradation process. To elucidate this hypothesis, one unsaturated polyurethane (PUU) and another saturated polyurethane (PUS) were synthesized and then biodegraded, and evidence was found to support this hypothesis. The polyurethanes were synthesized by a polycondensation reaction with yields up to 97%. It is important to note that both polyurethanes were constituted only by the recalcitrant hard segment and showed low crystallinity and molecular weight. Spectroscopic, thermal, and chromatographic techniques were used for physical and structural characterization. Both polyurethanes were biodegraded by the BP8 microbial community and the Cladosporium tenuissimum A3.I.1 fungus during a two-month period. A postbiodegradation characterization revealed the detriment of properties in both materials, indicating successful biodegradation. As a general trend, more efficient biodegradation was observed by the Cladosporium tenuissimum fungus A3.I.1 than by the BP8 microbial community. Specifically, with the fungus, the infrared analysis showed a decrease in the characteristic bands as well as the appearance of new carboxylic acid signals (approximately 1701 cm-1), suggesting the enzymatic cleavage of the urethane group. By comparison to polyurethanes, PUU showed superior biodegradation; using the fungus, a 51% decrease in molecular weight (Mw) for PUU was achieved, in contrast with 36% achieved for PUS. Despite the low crystallinity and molecular weight, the determining factor in biodegradation was the presence of unsaturations along the main chain. Thus, a more efficient oxidative attack is carried out by microorganisms on double bonds. The novel PUU showed similar biodegradation to the known polyester-type PU with highly hydrolysable groups. Consequently, PUU represents a green alternative to conventional polyurethanes and is a key material to achieve biorecycling.

Catalytic Features and Thermal Adaptation Mechanisms of a Deep Sea Bacterial Cutinase-Type Poly(Ethylene Terephthalate) Hydrolase.

Poly (ethylene terephthalate) (PET) plastic is chemically inert and persistent. Massive quantities of PET waste end up in landfill sites and oceans, posing major global pollution concerns. PET degrading enzymes with high efficiency provide plastic recycling and bioremediation possibilities. Here, we report a novel cutinase, MtCut with distinct catalytic behaviors, derived from the deep sea Nocardiopsaceae family strain. Biochemical analyses showed MtCut efficiently hydrolyzed PET at ambient temperatures and in an exo-type manner. The activity and stability of MtCut were enhanced by the addition of calcium ions. Notably, no hydrolysis products inhibition was observed during PET depolymerization, suggesting MtCut is a better biocatalyst when compared to other PET hydrolases. In addition, structural components associated with thermal adaptation were investigated using molecular dynamic (MD) simulations, and key regions regulating MtCut thermostability were identified. Our biochemical and structural analyses of MtCut deepen the understanding of PET hydrolysis by cutinases, and provide invaluable insights on improvement and performance engineering strategies for PET-degrading biocatalysts.

Toward Microbial Recycling and Upcycling of Plastics: Prospects and Challenges.

Annually, 400 Mt of plastics are produced of which roughly 40% is discarded within a year. Current plastic waste management approaches focus on applying physical, thermal, and chemical treatments of plastic polymers. However, these methods have severe limitations leading to the loss of valuable materials and resources. Another major drawback is the rapid accumulation of plastics into the environment causing one of the biggest environmental threats of the twenty-first century. Therefore, to complement current plastic management approaches novel routes toward plastic degradation and upcycling need to be developed. Enzymatic degradation and conversion of plastics present a promising approach toward sustainable recycling of plastics and plastics building blocks. However, the quest for novel enzymes that efficiently operate in cost-effective, large-scale plastics degradation poses many challenges. To date, a wide range of experimental set-ups has been reported, in many cases lacking a detailed investigation of microbial species exhibiting plastics degrading properties as well as of their corresponding plastics degrading enzymes. The apparent lack of consistent approaches compromises the necessary discovery of a wide range of novel enzymes. In this review, we discuss prospects and possibilities for efficient enzymatic degradation, recycling, and upcycling of plastics, in correlation with their wide diversity and broad utilization. Current methods for the identification and optimization of plastics degrading enzymes are compared and discussed. We present a framework for a standardized workflow, allowing transparent discovery and optimization of novel enzymes for efficient and sustainable plastics degradation in the future.

Emerging Strategies in Polyethylene Terephthalate Hydrolase Research for Biorecycling.

The research on polyethylene terephthalate (PET) hydrolyzing enzymes started in 2005; several studies are now nearing the objective of their application in biorecycling of PET, which is an urgent environmental issue. The thermostability of PET hydrolases must be higher than 70 °C, which has already been established by several thermophilic cutinases, as higher thermostability results in higher activity. Additionally, pretreatment of waste PET to more enzyme-attackable forms is necessary for PET biorecycling. This Minireview summarizes research on enzymatic PET hydrolysis from two viewpoints: 1) improvement of PET hydrolases by focusing on their thermostabilities by mutation of enzyme genes, their expression in several hosts, and their modifications; and 2) processing of waste PET to readily biodegradable forms. Finally, the outlook of PET biorecycling is described.

Inspired by nature: Microbial production, degradation and valorization of biodegradable bioplastics for life-cycle-engineered products.

The global environmental pollution by micro- and macro-plastics reveals the consequences of an extensive use of recalcitrant plastic products together with inappropriate waste management practices that fail to sufficiently recycle the broad types of conventional plastic waste. Biobased and biodegradable plastics are experiencing an uprising as their properties offer alternative waste management solutions for a more circular material economy. However, although the production of such bioplastics has advanced on scale, the end-of-life (EOL) (bio)technologies to promote circularity are lacking behind. While composting and biogas plants are the only managed EOL options today, advanced biotechnological recycling technologies for biodegradable bioplastics are still in an embryonic stage. Thus, developing efficient biotechnologies capable of transforming bioplastic waste into high-value chemical building blocks or into the constituents of the original polymer offers promising routes towards life-cycle-engineered products. This review aims at providing a comprehensive state-of-the-art overview of microbial-based processes involved in the complete lifecycle of bioplastics. The current trends in the bioplastic market, the beginning and EOL scenarios of bioplastics, and a critical discussion on the key factors and mechanisms governing microbial degradation are systematically presented. Also, a critical evaluation of terminology and international standards to quantify polymer biodegradability is provided together with the latest biotechnological recycling strategies, including the use of different pre-treatments for (bio)plastic waste. Finally, the challenges and future perspectives for the development of life-cycle-engineered biobased and biodegradable plastic products are discussed.

Polystyrene Biodegradation by Tenebrio molitor Larvae: Identification of Generated Substances Using a GC-MS Untargeted Screening Method.

A GC-MS method has been applied to screen and evaluate the generation of chemical compounds during the biodegradation of polystyrene (PS) with Tenebrio molitor larvae. Several resulting compounds have been identified, including trimers 2,4,6-triphenyl-1-hexene and 1,3,5-triphenylcyclohexane, the volatiles acetophenone and cumyl alcohol, and 2,4-di-tert butylphenol, a non-intentionally added substance (NIAS) present in the plastic material. The PS monomers styrene and α-methyl styrene were also identified in the extracts. Bioactive molecules present in the biomass of the studied insects were identified, such as the free fatty acids myristic, palmitic, and oleic acid. Undecanoic acid was also found, but in lower mass fractions. Finally, biochemically formatted amides resulting from their respective fatty acids were identified, namely tetradecanamide, hexadecanamide and oleamide. The formation of all these substances seems to suggest enzymatic and biochemical activity occurring during the biodegradation of PS, and their amounts varied throughout the experience. The overall degradation rate of PS resulted in a 13% rate, which highlights the potential of biorecycling using these insects.

Microbial Polyethylene Terephthalate Hydrolases: Current and Future Perspectives.

Plastic has rapidly transformed our world, with many aspects of human life now relying on a variety of plastic materials. Biological plastic degradation, which employs microorganisms and their degradative enzymes, has emerged as one way to address the unforeseen consequences of the waste streams that have resulted from mass plastic production. The focus of this review is microbial hydrolase enzymes which have been found to act on polyethylene terephthalate (PET) plastic. The best characterized examples are discussed together with the use of genomic and protein engineering technologies to obtain PET hydrolase enzymes for different applications. In addition, the obstacles which are currently limiting the development of efficient PET bioprocessing are presented. By continuing to study the possible mechanisms and the structural elements of key enzymes involved in microbial PET hydrolysis, and by assessing the ability of PET hydrolase enzymes to work under practical conditions, this research will help inform large-scale waste management operations. Finally, the contribution of microbial PET hydrolases in creating a potential circular PET economy will be explored. This review combines the current knowledge on enzymatic PET processing with proposed strategies for optimization and use, to help clarify the next steps in addressing pollution by PET and other plastics.

Toward Biorecycling: Isolation of a Soil Bacterium That Grows on a Polyurethane Oligomer and Monomer.

The fate of plastic waste and a sustainable use of synthetic polymers is one of the major challenges of the twenty first century. Waste valorization strategies can contribute to the solution of this problem. Besides chemical recycling, biological degradation could be a promising tool. Among the high diversity of synthetic polymers, polyurethanes are widely used as foams and insulation materials. In order to examine bacterial biodegradability of polyurethanes, a soil bacterium was isolated from a site rich in brittle plastic waste. The strain, identified as Pseudomonas sp. by 16S rRNA gene sequencing and membrane fatty acid profile, was able to grow on a PU-diol solution, a polyurethane oligomer, as the sole source of carbon and energy. In addition, the strain was able to use 2,4-diaminotoluene, a common precursor and putative degradation intermediate of polyurethanes, respectively, as sole source of energy, carbon, and nitrogen. Whole genome sequencing of the strain revealed the presence of numerus catabolic genes for aromatic compounds. Growth on potential intermediates of 2,4-diaminotoluene degradation, other aromatic growth substrates and a comparison with a protein data base of oxygenases present in the genome, led to the proposal of a degradation pathway.

Enzymatic recycling of thermoplastic polyurethanes: Synergistic effect of an esterase and an amidase and recovery of building blocks.

Biological recycling of polyurethanes (PU) is a huge challenge to take up in order to reduce a large part of the environmental pollution from these materials. However, enzymatic depolymerization of PU still needs to be improved to propose valuable and green solutions. The present study aims to identify efficient PU degrading enzymes among a collection of 50 hydrolases. Screenings based on model molecules were performed leading to the selection of an efficient amidase (E4143) able to hydrolyze the urethane bond of a low molar mass molecule and an esterase (E3576) able to hydrolyze a waterborne polyester polyurethane dispersion. Degradation activities of the amidase, the esterase and a mix of these enzymes were then evaluated on four thermoplastic polyurethanes (TPU) specifically designed for this assay. The highest degradation was obtained on a polycaprolactone polyol-based polyurethane with weight loss of 33% after 51 days measured for the esterase. Deep cracks on the polymer surface observed by scanning electron microscopy and the presence of oligomers on the remaining TPU detected by size exclusion chromatography evidenced the polymer degradation. Mixing both enzymes led to an increased amount of urethane bonds hydrolysis of the polymer. 6-hydroxycaproic acid and 4,4'-methylene dianiline were recovered after depolymerization as hydrolysis products. Such building blocks could get a second life with the synthesis of new macromolecular architectures.