ABSTRACT
The rapid increase in global plastic consumption, especially the worldwide use of polyethylene terephthalate (PET), has caused serious pollution problems. Due to the low recycling rate of PET, a substantial amount of waste accumulates in the environment, which prompts a growing focus on enzymatic degradation for its efficiency and environmentally friendliness. This study systematically designed and modified a cutinase, Est1 from Thermobifida alba AHK119, known for its potential of plastic-degradation at high temperatures. Additionally, the introduction of clustering algorithms provided the ability to understand and modify biomolecules, to accelerate the process of finding the optimal mutations. K-means was further proceeded based on the positive mutations. After comprehensive screening for thermostability and activity mutation sites, the dominant mutation Est1_5M (Est1 with the mutations of N213M, T215P, S115P, Q93A, and L91W) exhibited satisfying degradation ability for commercial PET bottles. The results showed that Est1_5M achieved a degradation rate of 90.84% in 72 h, 65-fold higher than the wild type. This study offers reliable theoretical and practical support for the development of efficient PET-degrading enzymes, providing a reference for plastic pollution management.
Subject(s)
Carboxylic Ester Hydrolases , Polyethylene Terephthalates , Polyethylene Terephthalates/chemistry , Carboxylic Ester Hydrolases/genetics , Carboxylic Ester Hydrolases/metabolism , Carboxylic Ester Hydrolases/chemistry , Biodegradation, EnvironmentalABSTRACT
Enzyme-mediated polyethylene terephthalate (PET) depolymerization has recently emerged as a sustainable solution for PET recycling. Towards an industrial-scale implementation of this technology, various strategies are being explored to enhance PET depolymerization (PETase) activity and improve enzyme stability, expression, and purification processes. Recently, rational engineering of a known PET hydrolase (LCC-leaf compost cutinase) has resulted in the isolation of a variant harboring four-point mutations (LCC-ICCG), presenting increased PETase activity and thermal stability. Here, we revealed the enzyme's natural extracellular expression and used it to efficiently screen error-prone genetic libraries based on LCC-ICCG for enhanced activity toward consumer-grade PET. Following multiple rounds of mutagenesis and screening, we successfully isolated variants that exhibited up to a 60% increase in PETase activity. Among other mutations, the improved variants showed a histidine to tyrosine substitution at position 218, a residue known to be involved in substrate binding and stabilization. Introducing H218Y mutation on the background of LCC-ICCG (named here LCC-ICCG/H218Y) resulted in a similar level of activity improvement. Analysis of the solved structure of LCC-ICCG/H218Y compared to other known PETases featuring different amino acids at the equivalent position suggests that H218Y substitution promotes enhanced PETase activity. The expression and screening processes developed in this study can be further used to optimize additional enzymatic parameters crucial for efficient enzymatic degradation of consumer-grade PET.
Subject(s)
Polyethylene Terephthalates , Polyethylene Terephthalates/chemistry , Polyethylene Terephthalates/metabolism , Carboxylic Ester Hydrolases/genetics , Carboxylic Ester Hydrolases/metabolism , Carboxylic Ester Hydrolases/chemistry , Enzyme Stability , Gene Library , BurkholderialesABSTRACT
Poly(lactic-acid) (PLA) is a biodegradable polymer widely used as a packaging material. Its monomer, lactic acid, and its derivatives have been used in the food, cosmetic, and chemical industries. The accumulation of PLA residues leads to the development of green degrading methodologies, such as enzymatic degradation. This work evaluates the potential use of three cutinolytic enzymes codified in the Aspergillus nidulans genome to achieve this goal. The results are compared with those obtained with proteinase K from Tritirachium album, which has been reported as a PLA-hydrolyzing enzyme. The results show that all three cutinases act on the polymer, but ANCUT 1 releases the highest amount of lactic acid (25.86 mM). Different reaction conditions assayed later led to double the released lactic acid. A decrease in weight (45.96%) was also observed. The enzyme showed activity both on poly L lactic acid and on poly D lactic acid. Therefore, this cutinase offers the potential to rapidly degrade these package residues, and preliminary data show that this is feasible.
ABSTRACT
Plastic pollution presents a global challenge, impacting ecosystems, wildlife, and economies. Polyethylene terephthalate (PET), widely used in products like bottles, significantly contributes to this issue due to poor waste collection. In recent years, there has been increasing interest in plant biomass-degrading enzymes for plastic breakdown, due to the structural and physicochemical similarities between natural and synthetic polymers. Filamentous fungi involved in hemicellulose degradation have developed a complex mode of action that includes not only enzymes but also biosurfactants; surface-active molecules that facilitate enzyme-substrate interactions. For this reason, this study aimed to mimic the mechanism of biomass degradation by repurposing plant cell wall degrading enzymes including a cutinase and three esterases to cooperatively contribute to PET degradation. Surfactants of different charge were also introduced in the reactions, as their role is similar to biosurfactants, altering the surface tension of the polymers and thus improving enzymes' accessibility. Notably, Fusarium oxysporum cutinase combined with anionic surfactant exhibited a 2.3- and 1.6-fold higher efficacy in hydrolyzing amorphous and semi-crystalline PET, respectively. When cutinase was combined with either of two ferulic acid esterases, it resulted in complete conversion of PET intermediate products to TPA, increasing the overall product release up to 1.9- fold in presence of surfactant. The combination of cutinase with a glucuronoyl esterase demonstrated significant potential in plastic depolymerization, increasing degradation yields in semi-crystalline PET by up to 1.4-fold. The approach of incorporating enzyme cocktails and surfactants emerge as an efficient solution for PET degradation in mild reaction conditions, with potential applications in eco-friendly plastic waste management.
Subject(s)
Biodegradation, Environmental , Carboxylic Ester Hydrolases , Cell Wall , Polyethylene Terephthalates , Polyethylene Terephthalates/chemistry , Polyethylene Terephthalates/metabolism , Cell Wall/metabolism , Hydrolysis , Carboxylic Ester Hydrolases/metabolism , Fusarium , Surface-Active Agents/chemistry , Esterases/metabolism , Plants/metabolismABSTRACT
Enzymatic depolymerization of PET waste emerges as a crucial and sustainable solution for combating environmental pollution. Over the past decade, PET hydrolytic enzymes, such as PETase from Ideonella sakaiensis (IsPETases), leaf compost cutinases (LCC), and lipases, have been subjected to rational mutation to enhance their enzymatic properties. ICCM, one of the best LCC mutants, was selected for overexpression in Escherichia coli BL21(DE3) for in vitro PET degradation. However, overexpressing ICCM presents challenges due to its low productivity. A new stress-inducible T7RNA polymerase-regulating E. coli strain, ASIAhsp, which significantly enhances ICCM production by 72.8â¯% and achieves higher enzyme solubility than other strains. The optimal cultural condition at 30 °C with high agitation, corresponding to high dissolved oxygen levels, has brought the maximum productivity of ICCM and high PET-hydrolytic activity. The most effective PET biodegradation using crude or pure ICCM occurred at pH 10 and 60 °C. Moreover, ICCM exhibited remarkable thermostability, retaining 60â¯% activity after a 5-day reaction at 60 °C. Notably, crude ICCM eliminates the need for purification and efficiently degrades PET films.
Subject(s)
Biodegradation, Environmental , Carboxylic Ester Hydrolases , Escherichia coli , Polyethylene Terephthalates , Escherichia coli/genetics , Escherichia coli/metabolism , Escherichia coli/enzymology , Polyethylene Terephthalates/metabolism , Hydrolysis , Carboxylic Ester Hydrolases/genetics , Carboxylic Ester Hydrolases/metabolism , Carboxylic Ester Hydrolases/chemistry , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Bacterial Proteins/chemistry , Enzyme Stability , Recombinant Proteins/metabolism , Recombinant Proteins/genetics , Burkholderiales/enzymology , Burkholderiales/genetics , Burkholderiales/metabolism , Hydrogen-Ion ConcentrationABSTRACT
Isoamyl fatty acid esters (IAFEs) are widely used as fruity flavor compounds in the food industry. In this study, various IAFEs were synthesized from isoamyl alcohol and various fatty acids using a cutinase enzyme (Rcut) derived from Rhodococcus bacteria. Rcut was immobilized on methacrylate divinylbenzene beads and used to synthesize isoamyl acetate, butyrate, hexanoate, octanoate, and decanoate. Among them, Rcut synthesized isoamyl butyrate (IAB) most efficiently. Docking model studies showed that butyric acid was the most suitable substrate in terms of binding energy and distance from the active site serine (Ser114) γ-oxygen. Up to 250 mM of IAB was synthesized by adjusting reaction conditions such as substrate concentration, reaction temperature, and reaction time. When the enzyme reaction was performed by reusing the immobilized enzyme, the enzyme activity was maintained at least six times. These results demonstrate that the immobilized Rcut enzyme can be used in the food industry to synthesize a variety of fruity flavor compounds, including IAB.
Subject(s)
Carboxylic Ester Hydrolases , Enzymes, Immobilized , Flavoring Agents , Molecular Docking Simulation , Rhodococcus , Enzymes, Immobilized/metabolism , Enzymes, Immobilized/chemistry , Rhodococcus/enzymology , Rhodococcus/metabolism , Flavoring Agents/metabolism , Flavoring Agents/chemistry , Carboxylic Ester Hydrolases/metabolism , Carboxylic Ester Hydrolases/chemistry , Esters/metabolism , Esters/chemistry , Pentanols/metabolism , Pentanols/chemistry , Fatty Acids/metabolism , Fatty Acids/chemistry , Bacterial Proteins/metabolism , Bacterial Proteins/genetics , Bacterial Proteins/chemistry , Temperature , Substrate Specificity , Butyric Acid/metabolism , Butyric Acid/chemistry , Catalytic DomainABSTRACT
Environmental pollution caused by plastic waste has become global problem that needs to be considered urgently. In the pursuit of a circular plastic economy, biodegradation provides an attractive strategy for managing plastic wastes, whereas effective plastic-degrading microbes and enzymes are required. In this study, we report that Blastobotrys sp. G-9 isolated from discarded plastic in landfills is capable of depolymerizing polyurethanes (PU) and poly (butylene adipate-co-terephthalate) (PBAT). Strain G-9 degrades up to 60% of PU foam after 21 days of incubation at 28 â by breaking down carbonyl groups via secretory hydrolase as confirmed by structural characterization of plastics and degradation products identification. Within the supernatant of strain G-9, we identify a novel cutinase BaCut1, belonging to the esterase family, that can reproduce the same effect. BaCut1 demonstrates efficient degradation toward commercial polyester plastics PU foam (0.5 mg enzyme/25 mg plastic) and agricultural film PBAT (0.5 mg enzyme/10 mg plastic) with 50% and 18% weight loss at 37 â for 48 h, respectively. BaCut1 hydrolyzes PU into adipic acid as a major end-product with 42.9% recovery via ester bond cleavage, and visible biodegradation is also identified from PBAT, which is a beneficial feature for future recycling economy. Molecular docking, along with products distribution, elucidates a special substrate-binding modes of BaCut1 with plastic substrate analogue. BaCut1-mediated polyester plastic degradation offers an alternative approach for managing PU plastic wastes through possible bio-recycling.
Subject(s)
Biodegradation, Environmental , Carboxylic Ester Hydrolases , Polyurethanes , Recycling , Polyurethanes/chemistry , Carboxylic Ester Hydrolases/metabolism , Carboxylic Ester Hydrolases/chemistry , Burkholderiales/enzymology , Burkholderiales/metabolism , Phthalic Acids/metabolism , Phthalic Acids/chemistry , Plastics/chemistry , Plastics/metabolism , Bacterial Proteins/metabolism , Bacterial Proteins/chemistry , PolyestersABSTRACT
Synthetic polymers, commonly known as plastics, are currently present in all aspects of our lives. Although they are useful, they present the problem of what to do with them after their lifespan. There are currently mechanical and chemical methods to treat plastics, but these are methods that, among other disadvantages, can be expensive in terms of energy or produce polluting gases. A more environmentally friendly alternative is recycling, although this practice is not widespread. Based on the practice of the so-called circular economy, many studies are focused on the biodegradation of these polymers by enzymes. Using enzymes is a harmless method that can also generate substances with high added value. Novel and enhanced plastic-degrading enzymes have been obtained by modifying the amino acid sequence of existing ones, especially on their active site, using a wide variety of genetic approaches. Currently, many studies focus on the common aim of achieving strains with greater hydrolytic activity toward a different range of plastic polymers. Although in most cases the depolymerization rate is improved, more research is required to develop effective biodegradation strategies for plastic recycling or upcycling. This review focuses on a compilation and discussion of the most important research outcomes carried out on microbial biotechnology to degrade and recycle plastics.
Subject(s)
Bacteria , Biodegradation, Environmental , Polymers , Bacteria/metabolism , Bacteria/genetics , Polymers/chemistry , Polymers/metabolism , Plastics/chemistry , Plastics/metabolismABSTRACT
The overwhelming use of PET plastic in various day-to-day activities led to the voluminous increase in PET waste and growing environmental hazards. A plethora of methods have been used that are associated with secondary pollutants. Therefore, microbial degradation of PET provides a sustainable approach due to its versatile metabolic diversity and capacity. The present work highlights the cutinase enzyme's role in PET degradation. This study focuses on the bacterial cutinases homologs screened from 43 reported phylum of bacteria. The reported bacterial cutinases for plastic degradation have been chosen as reference sequences, and 917 sequences have shown homology across the bacterial phyla. The dienelactone hydrolase (DLH) domain was identified for attaining specificity towards PET binding in 196 of 917 sequences. Various computational tools have been used for the physicochemical characterization of 196 sequences. The analysis revealed that most selected sequences are hydrophilic, extracellular, and thermally stable. Based on this analysis, 17 sequences have been further pursued for three-dimensional structure prediction and validation. The molecular docking studies of 17 selected sequences revealed efficient PET binding with the three sequences derived from the phylum Bacteroidota, the lowest binding energy of -5.9 kcal/mol, Armatimonadota, and Nitrososphaerota with -5.8 kcal/mol. The two enzyme sequences retrieved from the phylum Bacteroidota and Armatimonadota are metagenomically derived. Therefore, the present studies concluded that there is a high probability of finding cutinase homologs in various environmental resources that can be further explored for PET degradation.
ABSTRACT
Given the multitude of extracellular enzymes at their disposal, many of which are designed to degrade nature's polymers (lignin, cutin, cellulose, etc.), fungi are adept at targeting synthetic polyesters with similar chemical composition. Microbial-influenced deterioration of xenobiotic polymeric surfaces is an area of interest for material scientists as these are important for the conservation of the underlying structural materials. Here, we describe the isolation and characterization of the Papiliotrema laurentii 5307AH (P. laurentii) cutinase, Plcut1. P. laurentii is basidiomycete yeast with the ability to disperse Impranil-DLN (Impranil), a colloidal polyester polyurethane, in agar plates. To test whether the fungal factor involved in this clearing was a secreted enzyme, we screened the ability of P. laurentii culture supernatants to disperse Impranil. Using size exclusion chromatography (SEC), we isolated fractions that contained Impranil-clearing activity. These fractions harbored a single ~22 kD band, which was excised and subjected to peptide sequencing. Homology searches using the peptide sequences identified, revealed that the protein Papla1 543643 (Plcut1) displays similarities to serine esterase and cutinase family of proteins. Biochemical assays using recombinant Plcut1 confirmed that this enzyme has the capability to hydrolyze Impranil, soluble esterase substrates, and apple cutin. Finally, we confirmed the presence of the Plcut1 in culture supernatants using a custom antibody that specifically recognizes this protein. The work shown here supports a major role for the Plcut1 in the fungal degradation of natural polyesters and xenobiotic polymer surfaces.IMPORTANCEFungi play a vital role in the execution of a broad range of biological processes that drive ecosystem function through production of a diverse arsenal of enzymes. However, the universal reactivity of these enzymes is a current problem for the built environment and the undesired degradation of polymeric materials in protective coatings. Here, we report the identification and characterization of a hydrolase from Papiliotrema laurentii 5307AH, an aircraft-derived fungal isolate found colonizing a biodeteriorated polymer-coated surface. We show that P. laurentii secretes a cutinase capable of hydrolyzing soluble esters as well as ester-based compounds forming solid surface coatings. These findings indicate that this fungus plays a significant role in biodeterioration through the production of a cutinase adept at degrading ester-based polymers, some of which form the backbone of protective surface coatings. The work shown here provides insights into the mechanisms employed by fungi to degrade xenobiotic polymers.
Subject(s)
Carboxylic Ester Hydrolases , Fungal Proteins , Polyesters , Recombinant Proteins , Carboxylic Ester Hydrolases/metabolism , Carboxylic Ester Hydrolases/genetics , Fungal Proteins/genetics , Fungal Proteins/metabolism , Fungal Proteins/chemistry , Recombinant Proteins/metabolism , Recombinant Proteins/genetics , Recombinant Proteins/chemistry , Recombinant Proteins/isolation & purification , Polyesters/metabolism , HydrolysisABSTRACT
Plastic degradation by biological systems emerges as a prospective avenue for addressing the pressing global concern of plastic waste accumulation. The intricate chemical compositions and diverse structural facets inherent to polyurethanes (PU) substantially increase the complexity associated with PU waste management. Despite the extensive research endeavors spanning over decades, most known enzymes exhibit a propensity for hydrolyzing waterborne PU dispersion (i.e., the commercial Impranil DLN-SD), with only a limited capacity for the degradation of bulky PU materials. Here, we report a novel cutinase (CpCut1) derived from Cladosporium sp. P7, which demonstrates remarkable efficiency in the degrading of various polyester-PU materials. After 12-h incubation at 55°C, CpCut1 was capable of degrading 40.5% and 20.6% of thermoplastic PU film and post-consumer foam, respectively, while achieving complete depolymerization of Impranil DLN-SD. Further analysis of the degradation intermediates suggested that the activity of CpCut1 primarily targeted the ester bonds within the PU soft segments. The versatile performance of CpCut1 against a spectrum of polyester-PU materials positions it as a promising candidate for the bio-recycling of waste plastics.IMPORTANCEPolyurethane (PU) has a complex chemical composition that frequently incorporates a variety of additives, which poses significant obstacles to biodegradability and recyclability. Recent advances have unveiled microbial degradation and enzymatic depolymerization as promising waste PU disposal strategies. In this study, we identified a gene encoding a cutinase from the PU-degrading fungus Cladosporium sp. P7, which allowed the expression, purification, and characterization of the recombinant enzyme CpCut1. Furthermore, this study identified the products derived from the CpCut1 catalyzed PU degradation and proposed its underlying mechanism. These findings highlight the potential of this newly discovered fungal cutinase as a remarkably efficient tool in the degradation of PU materials.
Subject(s)
Carboxylic Ester Hydrolases , Cladosporium , Polyurethanes , Polyurethanes/chemistry , Polyurethanes/metabolism , Cladosporium/genetics , Cladosporium/metabolism , Prospective Studies , Biodegradation, Environmental , Polyesters/metabolism , PlasticsABSTRACT
Orthogonal T7 RNA polymerase (T7RNAP) and T7 promoter is a potent technique for protein expression in broad cells, but the energy requirements associated with this method impede the growth, leading to cell lysis when dealing with toxic and stress proteins. A Lemo21(DE3) strain denoted as L21 offers a solution by fine-tuning T7RNAP levels under rhamnose to induce T7 lysozyme (LysY) and enhance the protein production, but it requires optimization of inducer concentration, cultural temperature, and condition, even the types of carbon sources. Herein, we construct an automated stress-inducible adaptor (ASIA) employing different stress-inducible promoters from Escherichia coli. The ASIA system is designed to automatically regulate LysY expression in response to stress signals, thereby suppressing T7RNAP and amplifying the overexpression of stress protein cutinase ICCM. This approach fine-tunes T7RNAP levels and outperforms L21 in various temperatures and carbon source conditions. The ASIAhtp strain maintains ICCM yield at 91.6 mg/g-DCW even in the limiting carbon source at 1 g/L, which is 12-fold higher in protein productivity compared to using L21. ASIA as a versatile and robust tool for enhancing overexpression of stress proteins in E. coli is expected to address more difficult proteins in the future.
Subject(s)
Escherichia coli , Escherichia coli/genetics , Escherichia coli/metabolism , DNA-Directed RNA Polymerases/genetics , DNA-Directed RNA Polymerases/metabolism , Stress, Physiological/genetics , Viral Proteins/genetics , Viral Proteins/metabolism , Metabolic Engineering/methods , Promoter Regions, Genetic , Escherichia coli Proteins/genetics , Escherichia coli Proteins/metabolism , Heat-Shock Proteins/genetics , Heat-Shock Proteins/metabolism , Recombinant Proteins/genetics , Recombinant Proteins/metabolism , Recombinant Proteins/biosynthesisABSTRACT
Cutinase from Fusarium solani pisi is an enzyme that bridges functional properties between lipases and esterases, with applications in detergents, food processing, and the synthesis of fine chemicals. The purification procedure of recombinant cutinase from E. coil extracts is a well-established but time-consuming process, which involves a sequence of two anionic exchange chromatography steps followed by dialysis. Affinity chromatography is the most efficient method for protein purification, the major limitation of its use being often the availability of a ligand selective for a given target protein. Synthetic affinity ligands that specifically recognize certain sites on the surface of proteins are highly desirable for affinity processes due to their cost-effectiveness, durability, and reusability across multiple cycles. Additionally, these ligands establish moderate affinity interactions with the target protein, making it possible to purify proteins under gentle conditions while maintaining high levels of activity recovery. This study aimed to develop a new method for purifying cutinase, utilizing triazine-scaffolded biomimetic affinity ligands. These ligands were previously screened from a biased-combinatorial library to ensure their binding ability to cutinase without compromising its biological function. A lead ligand, designated as 11/3', [4-({4-chloro-6-[(2-methylbutyl)amino]-1,3,5-triazin-2-yl}amino)benzoic acid], was chosen and directly synthesized onto agarose. Experiments conducted at different scales demonstrated that this ligand (with an affinity constant Ka ≈ 104 M-1) exhibited selectivity towards cutinase, enabling the purification of the enzyme from an E. coli crude production medium in a single step. Under optimized conditions, the protein and activity yields reached 25% and 90%, respectively, with a resulting cutinase purity of 85%.
ABSTRACT
BACKGROUND: Cherry tomatoes are nutritious and favored by consumers. Processing them into dried cherry tomatoes can prolong their storage life and improve their flavor. The pretreatment of tomato pericarp is crucial for the subsequent processing. However, the traditional physical and chemical treatments of tomato pericarp generally cause nutrient loss and environmental pollution. RESULTS: In this study, a novel enzymatic method for cherry tomatoes was performed using mixed enzymes containing cutinase, cellulase and pectinase. Results showed that the pericarp permeability of cherry tomatoes was effectively improved due to enzymatic treatment. Changes in the microscopic structure and composition of the cuticle were revealed. After treatment with different concentrations of enzymes, cherry tomatoes exhibited higher pericarp permeability and sensory quality to varying degrees. The lycopene content and total polyphenol content significantly increased 2.4- and 1.45-fold, respectively. In addition, the satisfactory effect of the six-time reuse of enzymes on cherry tomatoes could still reach the same level as the initial effect, which effectively reduced the cost of production. CONCLUSIONS: This study revealed for the first time that a mixed enzymatic treatment consisting of cutinase, pectinase and cellulase could effectively degrade the cuticle, enhance the pericarp permeability and improve the quality of cherry tomatoes, with the advantages of being mildly controllable and environmentally friendly, providing a new strategy for the processing of dried cherry tomatoes. © 2023 Society of Chemical Industry.
Subject(s)
Cellulases , Solanum lycopersicum , Polygalacturonase , Lycopene , PermeabilityABSTRACT
Poly(butylene adipate-co-terephthalate) (PBAT) is among the most widely applied synthetic polyesters that are utilized in the packaging and agricultural industries, but the accumulation of PBAT wastes has posed a great burden to ecosystems. Using renewable enzymes to decompose PBAT is an eco-friendly solution to tackle this problem. Recently, we demonstrated that cutinase is the most effective PBAT-degrading enzyme and that an engineered cutinase termed TfCut-DM could completely decompose PBAT film to terephthalate (TPA). Here, we report crystal structures of a variant of leaf compost cutinase in complex with soluble fragments of PBAT, including BTa and TaBTa. In the TaBTa complex, one TPA moiety was located at a polymer-binding site distal to the catalytic center that has never been experimentally validated. Intriguingly, the composition of the distal TPA-binding site shows higher diversity relative to the one proximal to the catalytic center in various cutinases. We thus modified the distal TPA-binding site of TfCut-DM and obtained variants that exhibit higher activity. Notably, the time needed to completely degrade the PBAT film to TPA was shortened to within 24 h by TfCut-DM Q132Y (5813 mol per mol protein). Taken together, the structural information regarding the substrate-binding behavior of PBAT-degrading enzymes could be useful guidance for direct enzyme engineering.
Subject(s)
Phthalic Acids , Polymers , Polymers/chemistry , Ecosystem , Polyesters/chemistry , Phthalic Acids/chemistryABSTRACT
Polyethylene terephthalate (PET) is a synthetic polymer in the polyester family. It is widely found in objects used daily, including packaging materials (such as bottles and containers), textiles (such as fibers), and even in the automotive and electronics industries. PET is known for its excellent mechanical properties, chemical resistance, and transparency. However, these features (e.g., high hydrophobicity and high molecular weight) also make PET highly resistant to degradation by wild-type microorganisms or physicochemical methods in nature, contributing to the accumulation of plastic waste in the environment. Therefore, accelerated PET recycling is becoming increasingly urgent to address the global environmental problem caused by plastic wastes and prevent plastic pollution. In addition to traditional physical cycling (e.g., pyrolysis, gasification) and chemical cycling (e.g., chemical depolymerization), biodegradation can be used, which involves breaking down organic materials into simpler compounds by microorganisms or PET-degrading enzymes. Lipases and cutinases are the two classes of enzymes that have been studied extensively for this purpose. Biodegradation of PET is an attractive approach for managing PET waste, as it can help reduce environmental pollution and promote a circular economy. During the past few years, great advances have been accomplished in PET biodegradation. In this review, current knowledge on cutinase-like PET hydrolases (such as TfCut2, Cut190, HiC, and LCC) was described in detail, including the structures, ligand-protein interactions, and rational protein engineering for improved PET-degrading performance. In particular, applications of the engineered catalysts were highlighted, such as improving the PET hydrolytic activity by constructing fusion proteins. The review is expected to provide novel insights for the biodegradation of complex polymers.
ABSTRACT
From the surface of the earth to the depths of the ocean, microplastics are a hazard for both aquatic and terrestrial habitats. Due to their small size and vast expanse, they can further integrate into living things. The fate of microplastics in the environment depends upon the biotic components such as microorganisms which have potential enzymes to degrade the microplastics. As a result, scientists are interested in using microorganisms like bacteria, fungi, and others to remediate microplastic. These microorganisms release the cutinase enzyme, which is associated with the enzymatic breakdown of microplastics and plastic films. Yet, numerous varieties of microplastics exist in the environment and their contaminants act as a significant challenge in degrading microplastics. The review discusses the cutinases enzyme degradation strategies and potential answers to deal with existing and newly generated microplastic waste - polyethylene (PE), polyethylene terephthalate (PET), poly-ε-caprolactone (PCL), polyurethanes (PU), and polybutylene succinate (PBS), along with their degradation pathways. The potential of cutinase enzymes from various microorganisms can effectively act to remediate the global problem of microplastic pollution.
Subject(s)
Microplastics , Water Pollutants, Chemical , Plastics , Carboxylic Ester Hydrolases/metabolism , Polyethylene TerephthalatesABSTRACT
Enzymatic degradation of polyethylene terephthalic acid (PET) has been gaining increasing importance. This has resulted in a significant increase in the search for newer enzymes and the development of more efficient enzyme-based systems. Due to the lack of a standard screening process, screening new enzymes has relied on other assays to determine the presence of esterase activity. This, in turn, has led to various nomenclatures and methods used to describe them and measure their activity. Since all PET-hydrolyzing enzymes are α/ß hydrolases, they catalyze a serine nucleophilic attack and cleave an ester bond. They are lipases, esterases, cutinases and hydrolases. This has been used interchangeably, leading to difficulties while comparing results and evaluating progress. This review discusses the varied enzyme nomenclature being adapted, the different assays and analysis methods reported, and the strategies used to increase PET-hydrolyzing enzyme efficiency. A section on the various ways to quantify PET hydrolysis is also covered.
ABSTRACT
Poly(butylene adipate-co-terephthalate) (PBAT), a promising biodegradable aliphatic-aromatic copolyester material, can be applied as an alternative material to reduce the adverse effects of conventional plastics. However, the degradation of PBAT plastics in soil is time-consuming, and effective PBAT-degrading microorganisms have rarely been reported. In this study, the biodegradation properties of PBAT by an elite fungal strain and related mechanisms were elucidated. Four PBAT-degrading fungal strains were isolated from farmland soils, and Purpureocillium lilacinum strain BA1S showed a prominent degradation rate. It decomposed approximately 15 wt.% of the PBAT films 30 days after inoculation. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and Liquid chromatography mass spectrometry (LCâMS) were conducted to analyze the physicochemical properties and composition of the byproducts after biodegradation. In the presence of PBAT, the lipolytic enzyme activities of BA1S were remarkably induced, and its cutinase gene was also significantly upregulated. Of note, the utilization of PBAT in BA1S cells was closely correlated with intracellular cytochrome P450 (CYP) monooxygenase. Furthermore, CreA-mediated carbon catabolite repression was confirmed to be involved in regulating PBAT-degrading hydrolases and affected the degradation efficiency. This study provides new insight into the degradation of PBAT by elite fungal strains and increases knowledge on the mechanism, which can be applied to control the biodegradability of PBAT films in the future. KEY POINTS: ⢠Purpureocillium lilacinum strain BA1S was isolated from farmland soils and degraded PBAT plastic films at a prominent rate. ⢠The lipolytic enzyme activities of strain BA1S were induced during coculture with PBAT, and the cutinase gene was significantly upregulated during PBAT degradation. ⢠CreA-mediated carbon catabolite repression of BA1S plays an essential role in regulating the expression of PBAT-degrading hydrolases.
Subject(s)
Plastics , Polyesters , Polyesters/metabolism , Adipates , Soil , HydrolasesABSTRACT
Poly(ethylene terephthalate) (PET) is one of the world's most widely used polyester plastics. Due to its chemical stability, PET is extremely difficult to hydrolyze in a natural environment. Recent discoveries in new polyester hydrolases and breakthroughs in enzyme engineering strategies have inspired enormous research on biorecycling of PET. This study summarizes our research efforts toward large-scale, efficient, and economical biodegradation of post-consumer waste PET, including PET hydrolase selection and optimization, high-yield enzyme production, and high-capacity enzymatic degradation of post-consumer waste PET. First, genes encoding PETase and MHETase from Ideonella sakaiensis and the ICCG variant of leaf-branch compost cutinase (LCCICCG ) were codon-optimized and expressed in Escherichia coli BL21(DE3) for high-yield production. To further lower the enzyme production cost, a pelB leader sequence was fused to LCCICCG so that the enzyme can be secreted into the medium to facilitate recovery. To help bind the enzyme on the hydrophobic surface of PET, a substrate-binding module in a polyhydroxyalkanoate depolymerase from Alcaligenes faecalis (PBM) was fused to the C-terminus of LCCICCG . The resulting four different LCCICCG variants (LCC, PelB-LCC, LCC-PBM, and PelB-LCC-PBM), together with PETase and MHETase, were compared for PET degradation efficiency. A fed-batch fermentation process was developed to produce the target enzymes up to 1.2 g L-1 . Finally, the best enzyme, PelB-LCC, was selected and used for the efficient degradation of 200 g L-1 recycled PET in a well-controlled, stirred-tank reactor. The results will help develop an economical and scalable biorecycling process toward a circular PET economy.