Enhanced cellular internalization of near-infrared fluorescent single-walled carbon nanotubes facilitated by a transfection reagent.

Functionalized single-walled carbon nanotubes (SWCNTs) hold immense potential for diverse biomedical applications due to their biocompatibility and optical properties, including near-infrared fluorescence. Specifically, SWCNTs have been utilized to target cells as a vehicle for drug delivery and gene therapy, and as sensors for various intracellular biomarkers. While the main internalization route of SWCNTs into cells is endocytosis, methods for enhancing the cellular uptake of SWCNTs are of great importance. In this research, we demonstrate the use of a transfecting reagent for promoting cell internalization of functionalized SWCNTs. We explore different types of SWCNT functionalization, namely single-stranded DNA (ssDNA) or polyethylene glycol (PEG)-lipids, and two different cell types, embryonic kidney cells and adenocarcinoma cells. We show that internalizing PEGylated functionalized SWCNTs is enhanced in the presence of the transfecting reagent, where the effect is more pronounced for negatively charged PEG-lipid. However, ssDNA-SWCNTs tend to form aggregates in the presence of the transfecting reagent, rendering it unsuitable for promoting internalization. For all cases, cellular uptake is visualized by near-infrared fluorescence microscopy, showing that the SWCNTs are typically localized within the lysosome. Generally, cellular internalization was higher in the adenocarcinoma cells, thereby paving new avenues for drug delivery and sensing in malignant cells.

Fluorimetric determination of tetracycline antibiotics in animal derived foods using boron and nitrogen co-doped ceria-based nanoparticles.

An innovative synthesis of boron and nitrogen co-doped ceria-based nanoparticles (B/N-CeFNPs) with bright blue fluorescence emission is reported using the hydrothermal method. Based on the aggregation-induced emission enhancement (AIEE) effect between B/N-CeFNPs and chlortetracycline (CTC), a rapid detection method for CTC through fluorescence enhancement was developed. In addition, through the electron transfer process (ET), fluorescence resonance energy transfer (FRET) effect and static quenching between B/N-CeFNPs and oxytetracycline (OTC), a ratio fluorescence strategy for detecting OTC was generated. The fluorescence of B/N-CeFNPs at 410 nm can be effectively quenched by OTC, and new fluorescence emission appears at a wavelength of 500 nm. B/N-CeFNPs showed good linear responses with CTC and OTC in the range 0.1-1 µM and 1-40 µM, respectively. This system was used to simultaneously detect the CTC and OTC in milk and honey, realizing multi-residues detection of TCs in actual samples by using the same ceria-based fluorescence nanomaterial.

A novel nanoparticle-based fluorescent sandwich immunoassay for specific detection of Salmonella Typhimurium.

The diseases caused by foodborne pathogens have a serious impact on human health and social stability. Conventional detection methods can involve long assay times and complex pretreatment steps, making them unsuitable for rapid, large-scale analysis of food samples. We constructed a novel nano-fluorescence sandwich immunosorbent immunoassay (nano-FSIA) to rapidly detect Salmonella Typhimurium in food, based on strong covalent binding between streptavidin and biotin. We used antibodies coupled to large particle-size fluorescent microspheres as fluorescent probes for direct quantitative analysis of S. typhimurium in milk. The optimized parameters were determined, and specificity and sensitivity were validated in phosphate-buffered saline (PBS) and milk. The results demonstrated a wide dynamic detection range for S. typhimurium (103-108 colony forming units [CFU]/mL), with the limit of detection in PBS and milk at 234 and 346 CFU/mL, respectively. The results of nano-FSIA were consistent with those of plate counts and enzyme-linked immunosorbent assays, providing an effective and promising single-bacterium counting method for the rapid detection of Salmonella.

Novel quantitative immunohistochemical analysis for evaluating PD-L1 expression with phosphor-integrated dots for predicting the efficacy of patients with cancer treated with immune checkpoint inhibitors.

Introduction: Programmed cell death ligand 1 (PD-L1) expression in tumor tissues is measured as a predictor of the therapeutic efficacy of immune checkpoint inhibitors (ICIs) in many cancer types. PD-L1 expression is evaluated by immunohistochemical staining using 3,3´-diaminobenzidine (DAB) chronogenesis (IHC-DAB); however, quantitative and reproducibility issues remain. We focused on a highly sensitive quantitative immunohistochemical method using phosphor-integrated dots (PIDs), which are fluorescent nanoparticles, and evaluated PD-L1 expression between the PID method and conventional DAB method. Methods: In total, 155 patients with metastatic or recurrent cancer treated with ICIs were enrolled from four university hospitals. Tumor tissue specimens collected before treatment were subjected to immunohistochemical staining with both the PID and conventional DAB methods to evaluate PD-L1 protein expression. Results: PD-L1 expression assessed using the PID and DAB methods was positively correlated. We quantified PD-L1 expression using the PID method and calculated PD-L1 PID scores. The PID score was significantly higher in the responder group than in the non-responder group. Survival analysis demonstrated that PD-L1 expression evaluated using the IHC-DAB method was not associated with progression-free survival (PFS) or overall survival (OS). Yet, PFS and OS were strikingly prolonged in the high PD-L1 PID score group. Conclusion: Quantification of PD-L1 expression as a PID score was more effective in predicting the treatment efficacy and prognosis of patients with cancer treated with ICIs. The quantitative evaluation of PD-L1 expression using the PID method is a novel strategy for protein detection. It is highly significant that the PID method was able to identify a group of patients with a favorable prognosis who could not be identified by the conventional DAB method.

Dye-Derived Red-Emitting Carbon Dots for Lasing and Solid-State Lighting.

Carbon dots are carbon-based nanoparticles renowned for their intense light-emitting capabilities covering the whole visible light range. Achieving carbon dots emitting in the red region with high efficiency is extremely relevant due to their huge potential in biological applications and in optoelectronics. Currently, photoluminescence in such an energy interval is often associated with polyheterocyclic molecular domains forming during the synthesis that, however, present low emission efficiency and issues in controlling the optical features. Here, we overcome these problems by solvothermally synthesizing carbon dots starting from Neutral Red, a common red-emitting dye, as a molecular precursor. As a result of the synthesis, such molecular fluorophore is incorporated into a carbonaceous core while retaining its original optical properties. The obtained nanoparticles are highly luminescent in the red region, with a quantum yield comparable to that of the starting dye. Most importantly, the nanoparticle carbogenic matrix protects the Neutral Red molecules from photobleaching under ultraviolet excitation while preventing aggregation-induced quenching, thus allowing solid-state emission. These advantages have been exploited to develop a fluorescence-based color conversion layer by fabricating polymer-based highly concentrated solid-state carbon dot nanocomposites. Finally, the dye-based carbon dots demonstrate both stable Fabry-Perot lasing and efficient random lasing emission in the red region.

Construct Fluorescent Solid Lipid Nanoparticles from Bacterial Outer Membrane Vesicles to Study their Properties and Potential Applications as In Vivo and Invitro Imaging Agents.

In this study, the new solid lipid nanoparticles were created by combining fluorescent dye, fatty acid, lipid, and bacterial outer membranes. The synthesised particles were roughly 95-100 nm in size. Vero cells cultivated with these nanoparticles showed no cytotoxicity in 5-dimethylthiazol-2-yl-2, 5-diphenyltetrazolium bromide (MTT) assay. In the cell uptake studies, the vero cell line was employed. Cell lines absorbed fluorescent solid lipid nanoparticles (FSL NPs) better, according to the findings. The confocal microscopy results revealed a significant accumulation of FSL NPs in the cytoplasm over time. The results of small animal imaging employing BALB/c mice revealed that the nanoparticles generated provided high contrast signals. Overall, the OMVs-based FSL NPs system offers a unique imaging tool for studying intracellular interactions as well as a viable tool for drug delivery.

Fluorescent-Nanoparticle-Impregnated Nanocomposite Polymeric Gels for Biosensing and Drug Delivery Applications.

Nanocomposite polymeric gels infused with fluorescent nanoparticles have surfaced as a propitious category of substances for biomedical purposes owing to their exceptional characteristics. The aforementioned materials possess a blend of desirable characteristics, including biocompatibility, biodegradability, drug encapsulation, controlled release capabilities, and optical properties that are conducive to imaging and tracking. This paper presents a comprehensive analysis of the synthesis and characterization of fluorescent-nanoparticle-impregnated nanocomposite polymeric gels, as well as their biomedical applications, such as drug delivery, imaging, and tissue engineering. In this discourse, we deliberate upon the merits and obstacles linked to these substances, encompassing biocompatibility, drug encapsulation, optical characteristics, and scalability. The present study aims to provide an overall evaluation of the potential of fluorescent-nanoparticle-impregnated nanocomposite polymeric gels for biomedical applications. Additionally, emerging trends and future directions for research in this area are highlighted.

Fluorescent Nanoparticle Uptake by Myzocytosis and Endocytosis in Colpodella sp. ATCC 50594.

Colpodella sp. (ATCC 50594) is a free-living biflagellate predator closely related to pathogenic Apicomplexa such as Plasmodium, Cryptosporidium and Toxoplasma gondii. Colpodella sp. (ATCC 50594) obtain nutrients by preying on Parabodo caudatus using myzocytosis. The organization of the myzocytic apparatus and the mechanism of nutrient uptake into the posterior food vacuole of Colpodella species is unknown. In this study, we investigated myzocytosis using light and transmission electron microscopy. We investigated the uptake of 40 nm and 100 nm fluorescent nanoparticles and E. coli BioParticles by Colpodella sp. (ATCC 50594) in a diprotist culture. Transmission electron microscopy was used to investigate the morphology of the tubular tether formed during myzocytosis. E. coli BioParticles were taken up by P. caudatus but not by Colpodella sp. (ATCC 50594). Both protists took up the 100 nm and 40 nm beads, which were observed distributed in the cytoplasm of free unattached Colpodella sp. (ATCC 50594) trophozoites, and also in feeding Colpodella sp. (ATCC 50594) trophozoites and in the pre-cysts. Fragments of the nucleus and kinetoplast of P. caudatus and the nanoparticles were identified in the tubular tether being aspirated into the posterior food vacuole of Colpodella sp. (ATCC 50594). Unattached Colpodella sp. (ATCC 50594) endocytose nutrients from the culture medium independently from myzocytosis. The mechanisms of myzocytosis and endocytosis among Colpodella species may provide important insights into nutrient uptake among the pathogenic apicomplexans.

Intracellular Localization during Blood-Brain Barrier Crossing Influences Extracellular Release and Uptake of Fluorescent Nanoprobes.

To improve the efficacy of nanoparticles (NPs) and boost their theragnostic potential for brain diseases, it is key to understand the mechanisms controlling blood-brain barrier (BBB) crossing. Here, the capability of 100 nm carboxylated polystyrene NPs, used as a nanoprobe model, to cross the human brain endothelial hCMEC/D3 cell layer, as well as to be consequently internalized by human brain tumor U87 cells, is investigated as a function of NPs' different intracellular localization. We compared NPs confined in the endo-lysosomal compartment, delivered to the cells through endocytosis, with free NPs in the cytoplasm, delivered by the gene gun method. The results indicate that the intracellular behavior of NPs changed as a function of their entrance mechanism. Moreover, by bypassing endo-lysosomal accumulation, free NPs were released from cells more efficiently than endocytosed NPs. Most importantly, once excreted by the endothelial cells, free NPs were released in the cell culture medium as aggregates smaller than endocytosed NPs and, consequently, they entered the human glioblastoma U87 cells more efficiently. These findings prove that intracellular localization influences NPs' long-term fate, improving their cellular release and consequent cellular uptake once in the brain parenchyma. This study represents a step forward in designing nanomaterials that are able to reach the brain effectively.

Monitoring the Formation of Fibrin Clots as Part of the Coagulation Cascade Using Fluorescent Single-Walled Carbon Nanotubes.

Blood coagulation is a critical defense mechanism against bleeding that results in the conversion of liquid blood into a solid clot through a complicated cascade, which involves multiple clotting factors. One of the final steps in the coagulation pathway is the conversion of fibrinogen to insoluble fibrin mediated by thrombin. Because coagulation disorders can be life-threatening, the development of novel methods for monitoring the coagulation cascade dynamics is of high importance. Here, we use near-infrared (NIR)-fluorescent single-walled carbon nanotubes (SWCNTs) to image and monitor fibrin clotting in real time. Following the binding of fibrinogen to a tailored SWCNT platform, thrombin transforms the fibrinogen into fibrin monomers, which start to polymerize. The SWCNTs are incorporated within the clot and can be clearly visualized in the NIR-fluorescent channel, where the signal-to-noise ratio is improved compared to bright-field imaging in the visible range. Moreover, the diffusion of individual SWCNTs within the fibrin clot gradually slows down after the addition of thrombin, manifesting a coagulation rate that depends on both fibrinogen and thrombin concentrations. Our platform can open new opportunities for coagulation disorder diagnostics and allow for real-time monitoring of the coagulation cascade with a NIR optical signal output in the biological transparency window.

Customizable Dual-Fluorescent Nanoparticles for Tracing and Quantifying of Cell Transport.

Purpose: Nanotechnology-based drug delivery systems (nano-DDS) have been developed to be a promising strategy to improve the efficacy, safety, physicochemical and pharmacokinetic/pharmacodynamics properties of drugs. It is very necessary to elucidate the delivery process in vivo or in cells for the rational design and accurate preparation of nano-DDS. The aim of this study was to construct a nano-DDS to visualize and quantify the intracellular behavior of the loaded cargo and carrier in such a system. Methods: A carboxyl-terminal end of poly(lactic-co-glycolic acid) polymer was fluorescently labeled with rhodamine B by conjugation of ethylenediamine. Dual-fluorescent nanoparticles (DFPs) were prepared from this fluorescently labeled polymer to encapsulate a fluorescent cargo, coumarin 6. The carrier and cargo of DFPs were monitored by confocal fluorescence microscopy during cellular uptake. Furthermore, the transcellular transportation of DFPs was evaluated quantitatively by measuring the fluorescence intensity. Results: The obtained fluorescent polymer showed stable and quantifiable characteristics. DFPs could be customized in terms of coumarin 6 content (97.7±1.0%), size (367.3±1.7 nm) and dual-emission fluorescence (green cargo and red carrier). DFPs did not significantly affect cell viability, the integrity of cell monolayers and the microscopic morphology at concentrations below 0.7 mg/mL within 3 h of co-incubation with Caco-2 cells. Multichannel fluorescence monitoring revealed that the fluorescence intensity of the carrier and cargo increased with time, but not synchronously. By calculating the residual, intracellular, and transport amounts of DFPs, the material balance between the total amount of cellular transport and the dose administered was obtained. Conclusion: Based on the advantages of dual fluorescent labeling, the differential behavior of cell trafficking can be visualized and quantitatively analyzed for the cargo and carrier of DFPs. These results provide insights into the cellular transport process of holistic nanoparticles and complement our understanding of the biological behaviors of nano-DDS.

Modular Synthesis of Semiconducting Graft Copolymers to Achieve "Clickable" Fluorescent Nanoparticles with Long Circulation and Specific Cancer Targeting.

Semiconducting polymer nanoparticles (SPNs) are explored for applications in cancer theranostics because of their high absorption coefficients, photostability, and biocompatibility. However, SPNs are susceptible to aggregation and protein fouling in physiological conditions, which can be detrimental for in vivo applications. Here, a method for achieving colloidally stable and low-fouling SPNs is described by grafting poly(ethylene glycol) (PEG) onto the backbone of the fluorescent semiconducting polymer, poly(9,9'-dioctylfluorene-5-fluoro-2,1,3-benzothiadiazole), in a simple one-step substitution reaction, postpolymerization. Further, by utilizing azide-functionalized PEG, anti-human epidermal growth factor receptor 2 (HER2) antibodies, antibody fragments, or affibodies are site-specifically "clicked" onto the SPN surface, which allows the functionalized SPNs to specifically target HER2-positive cancer cells. In vivo, the PEGylated SPNs are found to have excellent circulation efficiencies in zebrafish embryos for up to seven days postinjection. SPNs functionalized with affibodies are then shown to be able to target HER2 expressing cancer cells in a zebrafish xenograft model. The covalent PEGylated SPN system described herein shows great potential for cancer theranostics.

Biotinylated Fluorescent Polymeric Nanoparticles for Enhanced Immunostaining.

The performance of fluorescence immunostaining is physically limited by the brightness of organic dyes, whereas fluorescence labeling with multiple dyes per antibody can lead to dye self-quenching. The present work reports a methodology of antibody labeling by biotinylated zwitterionic dye-loaded polymeric nanoparticles (NPs). A rationally designed hydrophobic polymer, poly(ethyl methacrylate) bearing charged, zwitterionic and biotin groups (PEMA-ZI-biotin), enables preparation of small (14 nm) and bright fluorescent biotinylated NPs loaded with large quantities of cationic rhodamine dye with bulky hydrophobic counterion (fluorinated tetraphenylborate). The biotin exposure at the particle surface is confirmed by Förster resonance energy transfer with dye-streptavidin conjugate. Single-particle microscopy validates specific binding to biotinylated surfaces, with particle brightness 21-fold higher than quantum dot-585 (QD-585) at 550 nm excitation. The nanoimmunostaining method, which couples biotinylated antibody (cetuximab) with bright biotinylated zwitterionic NPs through streptavidin, significantly improves fluorescence imaging of target epidermal growth factor receptors (EGFR) on the cell surface compared to a dye-based labeling. Importantly, cetuximab labeled with PEMA-ZI-biotin NPs can differentiate cells with distinct expression levels of EGFR cancer marker. The developed nanoprobes can greatly amplify the signal from labeled antibodies, and thus become a useful tool in the high-sensitivity detection of disease biomarkers.

A Versatile Theranostic Nanoplatform with Aggregation-Induced Emission Properties: Fluorescence Monitoring, Cellular Organelle Targeting, and Image-Guided Photodynamic Therapy.

Photosensitizers (PSs) play a key role in the photodynamic therapy (PDT) of tumors. However, commonly used PSs are prone to intrinsic fluorescence aggregation-caused quenching and photobleaching; this drawback severely limits the clinical application of PDT, necessitating new phototheranostic agents. Herein, a multifunctional theranostic nanoplatform (named TTCBTA NP) is designed and constructed to achieve fluorescence monitoring, lysosome-specific targeting, and image-guided PDT. TTCBTA with a twisted conformation and D-A structure is encapsulated in amphiphilic Pluronic F127 to form nanoparticles (NPs) in ultrapure water. The NPs exhibit biocompatibility, high stability, strong near-infrared emission, and desirable reactive oxygen species (ROSs) production capacity. The TTCBTA NPs also show high-efficiency photo-damage, negligible dark toxicity, excellent fluorescent tracing, and high accumulation in lysosome for tumor cells. Furthermore, TTCBTA NPs are used to obtain fluorescence images with good resolution of MCF-7 tumors in xenografted BALB/c nude mice. Crucially, TTCBTA NPs present a strong tumor ablation ability and image-guided PDT effect by generating abundant ROSs upon laser irradiation. These results demonstrate that the TTCBTA NP theranostic nanoplatform may enable highly efficient near-infrared fluorescence image-guided PDT.

Biodistribution and Adjuvant Effect of an Intranasal Vaccine Based on Chitosan Nanoparticles against Paracoccidioidomycosis.

Paracoccidioidomycosis (PCM) is a fungal infection caused by the thermodimorphic Paracoccidioides sp. PCM mainly affects the lungs, but, if it is not contained by the immune response, the disease can spread systemically. An immune response derived predominantly from Th1 and Th17 T cell subsets facilitates the elimination of Paracoccidioides cells. In the present work, we evaluated the biodistribution of a prototype vaccine based on the immunodominant and protective P. brasiliensis P10 peptide within chitosan nanoparticles in BALB/c mice infected with P. brasiliensis strain 18 (Pb18). The generated fluorescent (FITC or Cy5.5) or non-fluorescent chitosan nanoparticles ranged in diameter from 230 to 350 nm, and both displayed a Z potential of +20 mV. Most chitosan nanoparticles were found in the upper airway, with smaller amounts localized in the trachea and lungs. The nanoparticles complexed or associated with the P10 peptide were able to reduce the fungal load, and the use of the chitosan nanoparticles reduced the necessary number of doses to achieve fungal reduction. Both vaccines were able to induce a Th1 and Th17 immune response. These data demonstrates that the chitosan P10 nanoparticles are an excellent candidate vaccine for the treatment of PCM.

Novel Injectable Fluorescent Polymeric Nanocarriers for Intervertebral Disc Application.

Damage to intervertebral discs (IVD) can lead to chronic pain and disability, and no current treatments can fully restore their function. Some non-surgical treatments have shown promise; however, these approaches are generally limited by burst release and poor localization of diverse molecules. In this proof-of-concept study, we developed a nanoparticle (NP) delivery system to efficiently deliver high- and low-solubility drug molecules. Nanoparticles of cellulose acetate and polycaprolactone-polyethylene glycol conjugated with 1-oxo-1H-pyrido [2,1-b][1,3]benzoxazole-3-carboxylic acid (PBC), a novel fluorescent dye, were prepared by the oil-in-water emulsion. Two drugs, a water insoluble indomethacin (IND) and a water soluble 4-aminopyridine (4-AP), were used to study their release patterns. Electron microscopy confirmed the spherical nature and rough surface of nanoparticles. The particle size analysis revealed a hydrodynamic radius ranging ~150-162 nm based on dynamic light scattering. Zeta potential increased with PBC conjugation implying their enhanced stability. IND encapsulation efficiency was almost 3-fold higher than 4-AP, with release lasting up to 4 days, signifying enhanced solubility, while the release of 4-AP continued for up to 7 days. Nanoparticles and their drug formulations did not show any apparent cytotoxicity and were taken up by human IVD nucleus pulposus cells. When injected into coccygeal mouse IVDs in vivo, the nanoparticles remained within the nucleus pulposus cells and the injection site of the nucleus pulposus and annulus fibrosus of the IVD. These fluorescent nano-formulations may serve as a platform technology to deliver therapeutic agents to IVDs and other tissues that require localized drug injections.

High-performance green-emitting AIE nanoparticles for lateral flow immunoassay applications.

Ultrabright green-emissive AIE nanoparticles (AIENPs) were used as signal-amplification probes to enhance the detectability of lateral flow immunoassay (LFIA). The detection performances of the green-emissive AIENP probes in both sandwich and competitive LFIA formats were systematically evaluated. Benefiting from its remarkable fluorescent brightness, the developed AIENP-LFIA showed versatile applicability for the detection of small molecules and macromolecules by using ochratoxin A (OTA) and procalcitonin (PCT) as model analytes, respectively. Under the optimum conditions, the detection limits (LODs) of the fabricated AIENP-LFIA for OTA and PCT were 0.043 ng mL-1 and 0.019 ng mL-1, respectively. These LOD values are significantly lower than those of conventional LFIA methods using gold nanoparticles as signal reporters. In addition, we demonstrated the practical application potential of AIENP-LFIA for the detection of OTA in real maize samples and PCT in real serum samples. These results indicated that the ultrabright green-emissive AIENPs were promising as signal output materials for building high-performance LFIA platform and broadening the application scenarios of LFIA.

Green Carbon Dots: Synthesis, Characterization, Properties and Biomedical Applications.

Carbon dots (CDs) are a new category of crystalline, quasi-spherical fluorescence, "zero-dimensional" carbon nanomaterials with a spatial size between 1 nm to 10 nm and have gained widespread attention in recent years. Green CDs are carbon dots synthesised from renewable biomass such as agro-waste, plants or medicinal plants and other organic biomaterials. Plant-mediated synthesis of CDs is a green chemistry approach that connects nanotechnology with the green synthesis of CDs. Notably, CDs made with green technology are economical and far superior to those manufactured with physicochemical methods due to their exclusive benefits, such as being affordable, having high stability, having a simple protocol, and being safer and eco-benign. Green CDs can be synthesized by using ultrasonic strategy, chemical oxidation, carbonization, solvothermal and hydrothermal processes, and microwave irradiation using various plant-based organic resources. CDs made by green technology have diverse applications in biomedical fields such as bioimaging, biosensing and nanomedicine, which are ascribed to their unique properties, including excellent luminescence effect, strong stability and good biocompatibility. This review mainly focuses on green CDs synthesis, characterization techniques, beneficial properties of plant resource-based green CDs and their biomedical applications. This review article also looks at the research gaps and future research directions for the continuous deepening of the exploration of green CDs.

An ultrasensitive NIR-IIa' fluorescence-based multiplex immunochromatographic strip test platform for antibiotic residues detection in milk samples.

INTRODUCTION: Widely used in livestock breeding, residues of antibiotic drugs in milk have become a threat to food safety and human health. Current rapid detection technologies using colorimetric immunochromatographic strip tests (IST) lack the necessary sensitivity for on-site trace monitoring. Fluorescence-based detection in the near-infrared IIa' (NIR-IIa') region (1000 âˆ¼ 1300 nm) has enormous potential due to greatly minimized auto-fluorescence and light scattering. OBJECTIVES: The aim of this work is to develop an ultrasensitive IST platform using NIR-IIa' fluorescent nanoparticles as labels for multiplex antibiotic residues detection in milk. METHODS: NIR-IIa' fluorescent nanoparticles were assembled by encapsulating synthesized NIR-IIa' fluorophores into carboxyl - modified polystyrene nanoparticles. The NIR-IIa' nanoparticles were subsequently used as labels in an IST platform to detect sulfonamides, quinolones, and lincomycin simultaneously in milk. A portable fluorescent reader was fabricated to provide on-site detection. To further validate the developed IST platform, the detection was compared with LC-MS/MS in 22 real milk samples. RESULTS: Fluorescent nanoparticles were synthesized with low energy emission (1030 nm) and large Stokes shift (>250 nm) showing a much higher signal-to-noise ratio compared with fluorophores emitting in the NIR-I region. The developed IST platform yielded a highly sensitive, simultaneous quantification of sulfonamides, quinolones, and lincomycin in milk with detection limits of 46.7, 27.6 and 51.4 pg/mL, respectively, achieving a wide detection range (up to 50 ng/mL). The IST platform showed good accuracy, reproducibility, and specificity with the portable fluorescent reader which could rapidly quantify in 10 s. These results were better than reported immunochromatographic assays using fluorescent labels, and remarkably, showed a higher recognition ability than LC-MS/MS for real samples. CONCLUSION: The utility of NIR-IIa' fluorescence-based IST platform for the fast, sensitive, and accurate detection of antibiotics in milk was demonstrated, successfully verifying the potential of this platform in detecting trace materials in complex matrices.

Dual-Color Fluorescent Hydrogel Microspheres Combined with Smartphones for Visual Detection of Lactate.

Since it is difficult for human eyes to distinguish between two identical colors with only <15% variation in brightness, mono-color fluorescent hydrogel microspheres have some limitations in the detection of lactate. Herein, we prepared novel dual-color fluorescent hydrogel microspheres, which can achieve hue transformation. Microspheres were prepared by introducing a fluorescent nanoparticle as the reference signal while CdTe QDs were used as the response signal. We used smartphones with image processing software to collect and analyze data. In this way, the signal of lactate was converted to RGB (red, green, and blue) values, which can be quantitatively read. Within 10 to 1500 µM, the R/G values of the microspheres had a linear relationship with the logarithm of the lactate concentration. Moreover, color cards for lactate detection were prepared, from which the color change and concentration of lactate could be easily read by the naked eye. It is worth mentioning that this method was successfully applied to screen patients with hyperlactatemia.