Rational Design of Formate Dehydrogenase for Enhanced Thermal Stability and Catalytic Activity in Bioelectrocatalysis.

Formate dehydrogenase can be utilized as a biocatalyst in the bioelectrocatalysis of converting CO2 into formic acid. However, its industrial application has been hindered by limited thermal stability. This study successfully obtained a mutant (D533S/E684I) with enhanced thermal stability and catalytic activity through the rational design of flexible regions. The mutant exhibited a half-life (t1/2) 1.5 times longer than the wild type (WT) at 35 °C, along with a specific enzyme activity 7.46 times higher than that of the WT. Additionally, the catalytic efficiency (kcat/Km value) of the mutant toward the substrate was 2.72 s-1·mM-1, representing a 19.4-fold increase compared to the WT (0.14 s-1·mM-1). Formic acid production reached 53.4 mM through bioelectrocatalysis after 10 h, utilizing the mutant as the biocatalyst. Molecular dynamics simulations and structural analysis were employed to investigate the molecular mechanisms behind the enhanced thermal stability and activity. The displacement of a highly flexible region in the mutant may counteract the stability-activity trade-off. This study proposed a method for improving both thermal stability and activity in enzyme evolution.

Enhanced Methanol Electrooxidation and Supercapacitive Performance via Compositional Engineering of Colloidal Ni-Co Alloying Nanoparticles.

Among renewable energy technologies, particular attention is paid to electrochemically transforming methanol into valuable formate and storing energy into supercapacitors. In this study, we detailed a simple colloidal-based protocol for synthesizing a series of alloy nanoparticles with tuned Ni/Co atomic ratios, thereby optimizing their electrochemical performance. With the addition of 1 M methanol in 1 M KOH, the optimized composition was able to electrochemically produce formate at 0.149 mmol cm-2 h-1 with a Faradaic efficiency up to 95.1% at 0.6 V versus Hg/HgO within a 22-hour testing period. In 1 M KOH solution without methanol, the supercapacitive performance was achieved at a specific capacitance of over 1500 F g-1, and outstanding cycling stability with only approximately 20% decay after continuous 10000 charging-discharging cycles. These results underscore that the prepared Ni-Co alloy nanoparticles serve as multi-functional electrodes for electrochemical energy conversion and storage, particularly in the MOR and supercapacitors applications.

Solar energy powered electrochemical reduction of CO2 on In2O3 nanosheets with high energy conversion efficiency at a large current density.

Electrochemical CO2 reduction (ECO2R) to value-added chemicals offers a promising approach to both mitigate CO2 emission and facilitate renewable energy conversion. We demonstrate a solar energy powered ECO2R system operating at a relatively large current density (57 mA cm-2) using In2O3 nanosheets (NSs) as the cathode and a commercial perovskite solar cell as the electricity generator, which achieves the high solar to formate energy conversion efficiency of 6.6 %. The significantly enhanced operative current density with a fair solar energy conversion efficiency on In2O3 NSs can be ascribed to their high activity and selectivity for formate production, as well as the fast kinetics for ECO2R. The Faradic efficiencies (FEs) of formate In2O3 NSs are all above 93 %, with the partial current density of formate ranging from 2.3 to 342 mA cm-2 in a gas diffusion flow cell, which is among the widest for formate production on In-based catalysts. In-situ Raman spectroscopy and density functional theory simulations reveal that the exceptional performances of formate production on In2O3 NSs originates from the presence of abundant low coordinated edge sites, which effectively promote the selective adsorption of *OCHO while inhibiting *H adsorption.

In2O3/Bi2O3 interface induces ultra-stable carbon dioxide electroreduction on heterogeneous InBiOx catalyst.

The electrochemical reduction of CO2 (ERCO2) has emerged as one of the most promising methods for achieving both renewable energy storage and CO2 recovery. However, achieving both high selectivity and stability of catalysts remains a significant challenge. To address this challenge, this study investigated the selective synthesis of formate via ERCO2 at the interface of In2O3 and Bi2O3 in the InBiO6 composite material. Moreover, InBiO6 was synthesized using indium-based metal-organic frameworks as precursor, which underwent continuous processing through ion exchange and thermal reduction. The results revealed that the formate Faradaic efficiency (FEformate) of InBiO6 reached nearly 100 % at -0.86 V vs. reversible hydrogen electrode (RHE) and remained above 90 % after continuous 317-h electrolysis, which exceeded those of previously reported indium-based catalysts. Additionally, the InBiO6 composite material exhibited an FEformate exceeding 80 % across a wide potential range of 500 mV from -0.76 to -1.26 V vs. RHE. Density-functional theory analysis confirmed that the heterogeneous interface of InBiO6 played a role in achieving optimal free energies for *OCHO on its surface. Furthermore, the addition of Bi to the InBiO6 matrix facilitated electron transfer and altered the electronic structure of In2O3, thereby enhancing the adsorption, decomposition, and formate production of *OCHO.

Integrated "Two-in-One" Strategy for High-Rate Electrocatalytic CO2 Reduction to Formate.

The electrochemical CO2 reduction reaction (ECR) is a promising pathway to producing valuable chemicals and fuels. Despite extensive studies reported, improving CO2 adsorption for local CO2 enrichment or water dissociation to generate sufficient H* is still not enough to achieve industrial-relevant current densities. Herein, we report a "two-in-one" catalyst, defective Bi nanosheets modified by CrOx (Bi-CrOx), to simultaneously promote CO2 adsorption and water dissociation, thereby enhancing the activity and selectivity of ECR to formate. The Bi-CrOx exhibits an excellent Faradic efficiency (≈ 100 %) in a wide potential range from ‒0.4 to ‒0.9 V. In addition, it achieves a remarkable formate partial current density of 687 mA cm‒2 at a moderate potential of ‒0.9 V without iR compensation, the highest value at ‒0.9 V reported so far. Control experiments and theoretical simulations revealed that the defective Bi facilitates CO2 adsorption/activation while the CrOx accounts for enhancing the protonation process via accelerating H2O dissociation. This work presents a pathway to boosting formate production through tuning CO2 and H2O species at the same time.

Copper cluster regulated by N, B atoms for enhanced CO2 electroreduction to formate.

Electrochemical CO2 conversion into formate by intermittent renewable electricity, presents a captivating prospect for both the storage of renewable electrical energy and the utilization of emitted CO2. Typically, Cu-based catalysts in CO2 reduction reactions favor the production of CO and other by-products. However, we have shifted this selectivity by incorporating B, N co-doped carbon (BNC) in the fabrication of Cu clusters. These Cu clusters are regulated with B, N atoms in a porous carbon matrix (Cu/BN-C), and Zn2+ ions were added to achieve Cu clusters with the diameter size of ∼1.0 nm. The obtained Cu/BN-C possesses a significantly improved catalytic performance in CO2 reduction to formate with a Faradaic efficiency (FE) of up to 70 % and partial current density (jformate) surpassing 20.8 mA cm-2 at -1.0 V vs RHE. The high FE and jformate are maintained over a 12-hour. The overall catalytic performance of Cu/BN-C outperforms those of the other investigated catalysts. Based on the density functional theory (DFT) calculation, the exceptional catalytic behavior is attributed to the synergistic effect between Cu clusters and N, B atoms by modulating the electronic structure and enhancing the charge transfer properties, which promoted a preferential adsorption of HCOO* over COOH*, favoring formate formation.

Methane biohydroxylation into methanol by Methylosinus trichosporium OB3b: possible limitations and formate use during reaction.

Methane (CH4) hydroxylation into methanol (MeOH) by methanotrophic bacteria is an attractive and sustainable approach to producing MeOH. The model strain Methylosinus trichosporium OB3b has been reported to be an efficient hydroxylating biocatalyst. Previous works have shown that regardless of the bioreactor design or operation mode, MeOH concentration reaches a threshold after a few hours, but there are no investigations into the reasons behind this phenomenon. The present work entails monitoring both MeOH and formate concentrations during CH4 hydroxylation, where neither a gaseous substrate nor nutrient shortage was evidenced. Under the assayed reaction conditions, bacterial stress was shown to occur, but methanol was not responsible for this. Formate addition was necessary to start MeOH production. Nuclear magnetic resonance analyses with 13C-formate proved that the formate was instrumental in regenerating NADH; formate was exhausted during the reaction, but increased quantities of formate were unable to prevent MeOH production stop. The formate mass balance showed that the formate-to-methanol yield was around 50%, suggesting a cell regulation phenomenon. Hence, this study presents the possible physiological causes that need to be investigated further. Finally, to the best of our knowledge, this study shows that the reaction can be achieved in the native bacterial culture (i.e., culture medium containing added methanol dehydrogenase inhibitors) by avoiding the centrifugation steps while limiting the hands-on time and water consumption.

Effect of sodium formate and lactic acid bacteria treated rye silage on methane yield and energy balance in Hanwoo steers.

This study was performed to evaluate the effects of rye silage treated with sodium formate (Na-Fa) and lactic acid bacteria (LAB) inoculants on the ruminal fermentation characteristics, methane yield and energy balance in Hanwoo steers. Forage rye was harvested in May 2019 and ensiled without additives (control) or with either a LAB inoculant or Na-Fa. The LAB (Lactobacillus plantarum) were inoculated at 1.5 × 1010 CFU/g fresh matter, and the inoculant was sprayed onto the forage rye during wrapping at a rate of 4 L/ton of fresh rye forage. Sixteen percent of the Na-Fa solution was sprayed at a rate of approximately 6.6 L/ton. Hanwoo steers (body weight 275 ± 8.4 kg (n = 3, group 1); average body weight 360 ± 32.1 kg (n = 3, group 2)) were allocated into two pens equipped with individual feeding gates and used in duplicated 3 × 3 Latin square design. The experimental diet was fed twice daily (09:00 and 18:00) during the experimental period. Each period comprised 10 days for adaptation to the pen and 9 days for measurements in a direct respiratory chamber. The body weights of the steers were measured at the beginning and at the end of the experiment. Feces and urine were collected for 5 days after 1 day of adaptation to the chamber, methane production was measured for 2 days, and ruminal fluid was collected on the final day. In the LAB group, the ratio of acetic acid in the rumen fluid was significantly lower (p = 0.044) and the ratio of propionic acid in the rumen fluid was significantly higher (p = 0.017). Methane production per DDMI of the Na-FA treatment group was lower than that of the other groups (p = 0.052), and methane production per DNDFI of the LAB treatment group was higher than that of the other groups (p = 0.056). The use of an acid-based additive in silage production has a positive effect on net energy and has the potential to reduce enteric methane emissions in ruminants.

Transition metal pincer catalysts for formic acid dehydrogenation: a mechanistic perspective.

The storage and transportation of hydrogen gas, a non-polluting alternative to carbon-based fuels, have always been challenging due to its extreme flammability. In this regard, formic acid (FA) is a promising liquid organic hydrogen carrier (LOHC), and over the past decades, significant progress has been made in dehydrogenating FA through transition metal catalysis. In this review, our goal is to provide a detailed insight into the existing processes to expose various mechanistic challenges associated with FA dehydrogenation (FAD). Specifically, methodologies catalyzed by pincer-ligated metal complexes were chosen. Pincer ligands are preferred as they provide structural rigidity to the complexes, making the isolation and analysis of reaction intermediates less challenging and consequently providing a better mechanistic understanding. In this perspective, the catalytic activity of the reported pincer complexes in FAD was overviewed, and more importantly, the catalytic cycles were examined in detail. Further attention was given to the structural modifications, role of additives, reaction medium, and their crucial effects on the outcome.

Chemistry of Formate and Water Ligands on Metal Oxide Cluster Nodes of Metal-Organic Framework hcp Hf-UiO-66: Keys to Understanding Reactivity of Paired µ2-OH and Defect Sites.

Many metal-organic frameworks (MOFs) incorporate nodes that are metal oxide clusters, and ligands that have been observed on these nodes include formates, acetates, water, hydroxyl groups, and others, all of which are potentially important in affecting reactivities for applications in separations, catalysis, and sensing. Formate is a common node ligand, arising from formic acid used as a modulator and from N,N-dimethylformamide used as a solvent in MOF syntheses. Yet only little work has been reported characterizing the reactivities of node formate ligands. Infrared spectra reported here show that formate bonds to two types of sites on the paired Hf6O8 nodes of hcp UiO-66, namely, defect and µ2-OH sites. Quantifying the number of formate ligands by 1H NMR spectroscopy of digested samples showed an almost equal number of formate ligands on the two sites, indicating the likelihood that they neighbor each other. These formate ligands interact with water molecules, reversibly switching their bonding from bidentate to monodentate. The formates on µ2-OH sites of hcp Hf-UiO-66 interact much more strongly with water than those on defect sites of the same node, and both interact more strongly than isolated defect sites of Hf-UiO-66. Correspondingly, the catalytic activities of hcp UiO-66 determined as turnover frequencies on each site are approximately twofold higher than those on UiO-66, bolstering the inference that methanol dehydration is catalyzed by a node defect site and a neighboring node µ2-OH site. The results show how MOFs, with their well-defined node structures, provide unprecedented opportunities to understand details of reactivities and catalysis on metal oxide clusters, in contrast to bulk metal oxide surfaces.

Visible-Light-Promoted Reduction of Nitroarenes with Formate Salts as Reductants.

A visible-light-promoted reduction of nitrobenzenes using formate salts as the reductant was developed. A wide range of nitrobenzenes can be converted into aniline products in a transition metal free fashion. Mechanistic studies revealed that radical species (carbon dioxide radical anion and thiol radical) are key intermediates for the transformation. We anticipate that this method will provide a valuable and green strategy for the reduction of nitrobenzenes.

Modulation of charge structure in Bi/Bi2O3-In2O3@C for efficient CO2 electroreduction to formate.

Electrocatalytic CO2 reduction reaction (ECO2RR) to value-added chemicals is of significant importance to control CO2 emission and reach carbon neutrality. Herein, Bi/Bi2O3-In2O3@C electrocatalyst with nanosheet arrays is successfully fabricated by a facile solvothermal with subsequent calcination process. It is found that the electron structure of Bi/Bi2O3-In2O3@C can be adjusted by the synergistic effects of Bi-In hetero-diatoms, which can significantly enhance its inherent catalytic activity. As expected, it requires a maximum HCOOH faradaic efficiency (FEHCOOH) of 97.6 % at -1.1 V vs. Reversible Hydrogen Electrode (RHE), which further delivers over 90 % at a wide potential range of -0.8 to -1.4 V vs. RHE, and exhibits high stability of 90.1 % over 60-h long-term test. In-situ Raman analysis is performed to explore the mechanism of its excellent stability. Meanwhile, in-situ attenuated total reflection-Fourier-transform infrared (ATR-FTIR) analysis combined with theoretical calculations reveal that the hetero-bridging absorption of *OCHO and d-d orbital coupling effect can regulate d-band center of Bi/Bi2O3-In2O3@C and improve its density of states around Ef, moderating free energy of intermediates, thereby the improved formate production performance can be seen.

Photoelectrocatalytic CO2 Reduction to Formate Using a BiVO4/ZIF-8 Heterojunction.

Converting CO2 into high-value chemical fuels through green photoelectrocatalytic reaction path is considered as a potential strategy to solve energy and environmental problems. In this work, BiVO4/ZIF-8 heterojunctions are prepared by in-situ synthesis of ZIF-8 nanocrystals with unique pore structure on the surface of BiVO4. The experimental results show that the silkworm pupa-like BiVO4 is successfully combined with porous ZIF-8, and the introduction of ZIF-8 can provide more sites for CO2 capture. The optimal composite ratio of 4:1-BiVO4/ZIF-8 showed excellent CO2 reduction activity and the lowest electrochemical transport resistance. In the electrocatalytic system, 4:1-BiVO4/ZIF-8 exhibits formate Faraday efficiency of 82.60% at -1.0 V vs. RHE. Furthermore, the Faraday efficiency increases to 91.24% at - 0.9 V vs. RHE in the photoelectrocatalytic system, which is 10.8 times that of pristine BiVO4. The results show that photoelectric synergism can not only reduce energy consumption, but also improve the Faraday efficiency of formate. In addition, the current density did not decrease during 34 h electrolysis, showing long-term stability. This work highlights the importance of the construction of heterojunction to improve the performance of photoelectrocatalytic CO2 reduction.

Tuning structural modulation and magnetic properties in metal-organic coordination polymers [CH3NH3]CoxNi1-x(HCOO)3.

Three solid solutions of [CH3NH3]CoxNi1-x(HCOO)3, with x = 0.25 (1), x = 0.50 (2) and x = 0.75 (3), were synthesized and their nuclear structures and magnetic properties were characterized using single-crystal neutron diffraction and magnetization measurements. At room temperature, all three compounds crystallize in the Pnma orthorhombic space group, akin to the cobalt and nickel end series members. On cooling, each compound undergoes a distinct series of structural transitions to modulated structures. Compound 1 exhibits a phase transition to a modulated structure analogous to the pure Ni compound [Cañadillas-Delgado, L., Mazzuca, L., Fabelo, O., Rodríguez-Carvajal, J. & Petricek, V. (2020). Inorg. Chem. 59, 17896-17905], whereas compound 3 maintains the behaviour observed in the pure Co compound reported previously [Canadillas-Delgado, L., Mazzuca, L., Fabelo, O., Rodriguez-Velamazan, J. A. & Rodriguez-Carvajal, J. (2019). IUCrJ, 6, 105-115], although in both cases the temperatures at which the phase transitions occur differ slightly from the pure phases. Monochromatic neutron diffraction measurements showed that the structural evolution of 2 diverges from that of either parent compound, with competing hydrogen bond interactions that drive the modulation throughout the series, producing a unique sequence of phases. It involves two modulated phases below 96 (3) and 59 (3) K, with different q vectors, similar to the pure Co compound (with modulated phases below 128 and 96 K); however, it maintains the modulated phase below magnetic order [at 22.5 (7) K], resembling the pure Ni compound (which presents magnetic order below 34 K), resulting in an improper modulated magnetic structure. Despite these large-scale structural changes, magnetometry data reveal that the bulk magnetic properties of these solid solutions form a linear continuum between the end members. Notably, doping of the metal site in these solid solutions allows for tuning of bulk magnetic properties, including magnetic ordering temperature, transition temperatures and the nature of nuclear phase transitions, through adjustment of metal ratios.

Surface Au-H Species as Self-Generated Prosthetic Groups of a Formate Dehydrogenase-like Au Nanozyme to Engineer Multienzymatic Activities.

Although the past decade has witnessed a rapid development of oxidoreductase-mimicking nanozymes, the mimicry of cofactors that play key roles in mediating electron and proton transfer remains limited. This study explores how surface Au-H species conjugated to Au nanoparticles (NPs) that imitate formate dehydrogenase (FDH) can serve as cofactors, analogous to NADH in natural enzymes, offering diverse possibilities for FDH-mimicking Au nanozymes to mimic various enzymes. Once O2 is present, Au-H species assist Au NPs to complete the on-demand H2O2 generation for cascade reactions. Alternatively, when oxidizing organic molecules are introduced as substrates, Au-H species confer nitro reductase- and aldehyde reductase-like activities on Au NPs under anaerobic conditions. Furthermore, similar to the dehydrogenase-NADH complex, Au NPs possessing Au-H species are gifted with esterase-like activity for ester hydrolysis. By revealing that Au-H species are prosthetic groups for FDH-mimicking Au nanozymes, this work may inspire explorations into future self-generated cofactor mimics for nanozymes, thereby circumventing the need for exogenous cofactors.

High-Dimensional Nb2O5 with NbO6 Octahedra for Efficient Electrocatalytic Upgrading of Methanol to Formate.

Facilitating the selective electrochemical oxidation of methanol into value-added formate is essential for electrochemical refining. Here we propose a high-dimensional Nb2O5 on Ni foam (Nb2O5-HD@NF) composite as anode for methanol oxidation reaction (MOR) for efficient production of formate. In an electrolyte containing 3 M methanol aqueous solution, the Nb2O5-HD@NF anode requires only 240 mV overpotential to deliver an industrial-level current density of 100 mA cm-2 with a formate Faraday efficiency of 100%. In situ Raman and electrochemical kinetic analyses reveal that the origin of the excellent activity in 3 M methanol electrolyte can be ascribed to the NbO6 octahedra as active sites and the Lewis acid sites on the surface of Nb2O5-HD. This work may pave a way for the design of non-noble metal electrocatalysts with surface acidity engineering for the effective electrocatalytic upgrading of biomass molecules.

Acidity induces durable enhancement of Treg cell suppressive functions for tumor immune evasion.

The microenvironment within solid tumors often becomes acidic due to various factors associated with abnormal metabolism and cellular activities, including increased lactate production as a result of dysregulated tumor glycolysis. Recently, we have identified multiple tumor microenvironment (TME) factors that potentiate regulatory T (Treg) cell function in evading anti-tumor immunosurveillance. Despite the strong correlation between lactate and acidity, the potential roles of acidity in intratumoral Treg cell adaptation and underlying molecular mechanisms have gone largely unstudied. In this study, we demonstrate that acidity significantly enhances immunosuppressive functions of nTreg cells, but not iTreg cells, without altering the expression of either FoxP3 or the cell surface receptors CD25, CTLA4, or GITR in these cells. Surprisingly, the addition of lactate, often considered a major contributor to increased acidity of the TME, completely abolished the acidity-induced enhancement of nTreg suppressive functions. Consistently, metabolic flux analyses showed elevated basal mitochondrial respiratory capacity and ATP-coupled respiration in acidity-treated nTreg cells without altering glycolytic capacity. Genome-wide transcriptome and metabolomics analyses revealed alterations in multiple metabolic pathways, particularly the one-carbon folate metabolism pathway, with reduced SAM, folate, and glutathione, in nTreg cells exposed to low pH conditions. Addition of a one-carbon metabolic contributor, formate, diminished the acidity-induced enhancement in nTreg cell suppressive functions, but neither SAM nor glutathione could reverse the phenotype. Remarkably, in vitro transient treatment of nTreg cells resulted in sustained enhancement of their functions, as evidenced by more vigorous tumor growth observed in mice adoptively receiving acidity-treated nTreg cells. Further analysis of intratumoral infiltrated T cells confirmed a significant reduction in CD8+ T cell frequency and their granzyme B production. In summary, our study elucidates how acidity-mediated metabolic reprogramming leads to sustained Treg-mediated tumor immune evasion.

In Situ Fourier Transform Infrared Investigation on the Low-Level Carbon Dioxide Conversion over a Nickel/Titanium Dioxide Catalyst.

Efficiently converting atmospheric carbon dioxide (CO2) is crucial for sustainable human development. In this study, we conducted systematic in situ Fourier transform infrared tests to examine how hydrogen (H2) partial pressure affects the conversion of low-level CO2 (around 400 ppm) using nickel/titanium dioxide (Ni/TiO2). Results show that increasing H2 partial pressure significantly increases surface monodentate formate species, leading to enhanced methane (CH4) production at both 250 and 400 °C. Conversely, on Ni's surface, the key species are formyls and bidentate formate at 250 °C, but these decrease significantly at 400 °C. These findings indicate that low-level CO2 is more easily converted to CH4 over Ni/TiO2 than Ni, regardless of temperature. Additionally, the strong Ni-TiO2 interaction gives Ni/TiO2 an advantage in converting low CO2 concentrations, with excellent durability even at 400 °C. This study enhances our understanding of direct CO2 conversion and aids in the development of advanced CO2 emission reduction technologies.

A growth-based screening strategy for engineering the catalytic activity of an oxygen-sensitive formate dehydrogenase.

Enzyme engineering is a powerful tool for improving or altering the properties of biocatalysts for industrial, research, and therapeutic applications. Fast and accurate screening of variant libraries is often the bottleneck of enzyme engineering and may be overcome by growth-based screening strategies with simple processes to enable high throughput. The currently available growth-based screening strategies have been widely employed for enzymes but not yet for catalytically potent and oxygen-sensitive metalloenzymes. Here, we present a screening system that couples the activity of an oxygen-sensitive formate dehydrogenase to the growth of Escherichia coli. This system relies on the complementation of the E. coli formate hydrogenlyase (FHL) complex by Mo-dependent formate dehydrogenase H (EcFDH-H). Using an EcFDH-H-deficient strain, we demonstrate that growth inhibition by acidic glucose fermentation products can be alleviated by FHL complementation. This allows the identification of catalytically active EcFDH-H variants at a readily measurable cell density readout, reduced handling efforts, and a low risk of oxygen contamination. Furthermore, a good correlation between cell density and formate oxidation activity was established using EcFDH-H variants with variable catalytic activities. As proof of concept, the growth assay was employed to screen a library of 1,032 EcFDH-H variants and reduced the library size to 96 clones. During the subsequent colorimetric screening of these clones, the variant A12G exhibiting an 82.4% enhanced formate oxidation rate was identified. Since many metal-dependent formate dehydrogenases and hydrogenases form functional complexes resembling E. coli FHL, the demonstrated growth-based screening strategy may be adapted to components of such electron-transferring complexes.IMPORTANCEOxygen-sensitive metalloenzymes are highly potent catalysts that allow the reduction of chemically inert substrates such as CO2 and N2 at ambient pressure and temperature and have, therefore, been considered for the sustainable production of biofuels and commodity chemicals such as ammonia, formic acid, and glycine. A proven method to optimize natural enzymes for such applications is enzyme engineering using high-throughput variant library screening. However, most screening methods are incompatible with the oxygen sensitivity of these metalloenzymes and thereby limit their relevance for the development of biosynthetic production processes. A microtiter plate-based assay was developed for the screening of metal-dependent formate dehydrogenase that links the activity of the tested enzyme variant to the growth of the anaerobically grown host cell. The presented work extends the application range of growth-based screening to metalloenzymes and is thereby expected to advance their adoption to biosynthesis applications.

FhlA is a Formate Binding Protein.

Escherichia coli uses glycolysis and mixed acid fermentation and produces formate as by product. One system E. coli uses for formate oxidation is formate hydrogen lyase complex (FHL). The expression of the FHL complex is dependent on formate and regulated by the transcriptional regulator FhlA. The structure of FhlA is composed of three domains. The N-terminal domain is putatively responsible for formate binding and FhlA oligomerization as a tetramer, the central portion of FhlA contains a AAA+ domain that hydrolyzes ATP, and the C-terminal domain binds DNA. Formate enhances FhlA-mediated expression of FHL; however, FhlA direct interaction with formate has never been demonstrated. Formate-protein interactions are challenging to assess, due to the small and ubiquitous nature of the molecule. Here, we have developed three techniques to assess formate-protein interaction. We use these techniques to confirm that FhlA binds formate in the N-terminal domain in vitro, and that this interaction is partially dependent on residues E183 and E363, consistent with previous reports. This study is a proof of concept that these techniques can be used to assess other formate-protein interactions.