Investigating a novel therapeutic composition for dry eye syndrome management: In vitro and in vivo studies.

Dry eye syndrome (DES) presents a significant challenge in ophthalmic care, necessitating innovative approaches for effective management. This research article introduces a multifaceted strategy to address DES through the development of ocular inserts utilizing advanced technologies such as hot-melt extrusion (HME) and the CaliCut post-extrusion system. The formulation includes key ingredients targeting different layers of the tear film and associated inflammation, including hydroxypropyl cellulose (HPC), polyethylene glycol (PEG), castor oil, and dexamethasone. The study incorporates a Design of Experiments (DoE) approach, integrating HME and the precise stretching and cutting technique of CaliCut for manufacturing consistency and dimensional control of the inserts. The developed insert(s) have been systematically characterized for their physicochemical properties, release profile, and in vivo efficacy. In silico molecular docking studies have also been conducted to assess the binding affinities of formulation components with ocular mucin, elucidating their binding affinities. Preliminary results demonstrate promising potential for the developed insert in managing DES, offering preservative-free treatment, sustained drug delivery, and improved patient compliance. This study highlights the integration of advanced technologies and formulation strategies in ocular drug delivery for effective DES management.

Advancements in Colon-Targeted Drug Delivery: A Comprehensive Review on Recent Techniques with Emphasis on Hot-Melt Extrusion and 3D Printing Technologies.

This review investigates the progression and effectiveness of colon-targeted drug delivery systems, offering a comprehensive understanding of the colon's anatomy and physiological environment. Recognizing the distinctive features of the colon is crucial for successfully formulating oral dosage forms that precisely target specific areas in the gastrointestinal tract (GIT) while minimizing side effects through mitigating off-target sites. This understanding forms the basis for designing effective targeted drug delivery systems. The article extensively examines diverse approaches to formulating drugs for colonic targeting, highlighting key polymers and excipients in their production. Special emphasis is given to innovative approaches such as hot-melt extrusion (HME) and three-dimensional printing (3D-P), renowned for their accuracy in drug release kinetics and intricate dosage form geometry. However, challenges arise regarding material standardization and the complex network of regulatory clearances required to confirm safety and effectiveness. The review provides insights into each application's advantages and potential challenges. Furthermore, it sheds light on the local diseases that necessitate colon targeting and the available marketed products, providing an overview of the current state of colon-targeted drug delivery systems. Additionally, the review emphasizes the importance of testing drugs in a controlled in vitro environment during the development phase. It also discusses the future directions for successful development in this field. By integrating knowledge across anatomy, formulation techniques, and assessment methodologies, this review is a valuable resource for researchers navigating the dynamic field of colonic drug delivery.

Single-Step Extrusion Process for Formulation Development of Self-Emulsifying Granules for Oral Delivery of a BCS Class IV Drug.

This study aimed to develop and optimize formulations containinga BCS Class IV drug by improving its solubility and permeability. Herein development of self-emulsifying solid lipid matrices was investigated as carrier systems for a BCS Class IV model drug. Self-emulsifying drug delivery systems (SEDDS) have been extensively investigated for formulating drugs with poor water solubility. However, manufacturing SEDDS is challenging. These systems usually have low drug-loading capacities, and the incorporated drugs tend to recrystallize during storage, which severely impacts the storage stability in vitro and performance in vivo. Moreover, they require greater amounts (>80%) of lipid carriers, cosolvents, surfactants, and other excipients to keep them from recrystallizing. This in turn is again challenging for high-dose drugs as it affects the size of the final drug product (tablets and capsules). Also, the final liquid nature of the formulation affects the handling and processability of the formulation, which poses challenges during the manufacturing and packaging steps. In this work, we have studied the feasibility of a single-step extrusion process to formulate and optimize solid self-emulsifying granules with a relatively higher drug loading of Ritonavir (RTV), a BCS Class IV drug. Further, we have compared the performance of using these granules as the feedstock for direct powder extrusion-based 3D printing as opposed to the use of physical blends. The stability and solubility-permeability advantage of these granules was also evaluated where SEDDS showed about 27 and 20 fold increase in apparent solublity and permeability compared to bulk drug, respectively. Combining the capabilities of HME to form drug-loaded homogeneous granules as a continuous process along with application of direct printing extruiosn (DPE) 3D printing improves the drug delivery prospects for such candidates.

'Exploring the preparation of griseofulvin CAMS with amino acids of different hydrophobicity as co-formers using a modified hot-melt extrusion process'.

Co-amorphous systems (CAMS) of griseofulvin (GRI) with the amino acids (AA): L-lysine (LYS), L-valine (VAL) and L-methionine (MET) of increasing hydrophobicity were prepared using a solvent assisted hot-melt extrusion (HME). Co-formability was evaluated by thermodynamic miscibility prediction, thermal analysis (DSC), powder crystallography (pXRD) and vibrational spectroscopy (ATR-FTIR). Decomposition temperature range was defined by thermogravimetry (TGA) and DSC. Solubilities of crystalline and amorphous drug were determined by the UV-extinction method. The physical stability of GRI/AA CAMS was evaluated by accelerated tests and for ratios 1:1 and 1:2 was excellent. Non-sink dissolution tests of equimolar CAMS of the more hydrophobic MET and VAL revealed long lasting supersaturation, above the solubility of amorphous drug, whereas ratios 2:1 and 1:2 gave lower supersaturation due to partial recrystallization during dissolution, despite the good physical stability. CAMS of the hydrophilic LYS were physically stable but showed poor dissolution, possibly due to self-association of LYS in water. Addition of wetting agent in the dissolution medium improved dissolution without altering the profile. Since previous attempts to formulate GRI/AA CAMS with purely mechanical methods found only moderate success, the feed pretreatment HME method employed in this work makes an excellent alternative for drug/AA CAMS where mechanical or solvent evaporation methods fail.

Dosage by design - 3D printing individualized cabozantinib tablets with immediate release.

Production of patient-specific dosage forms is important to improve patient adherence and effectiveness while reducing the prevalence and severity of adverse effects. Due to its possibility of rapid prototyping 3D printing can be used to produce individual dosages while utilizing techniques such as hot melt extrusion to increase the bioavailability of poorly soluble drugs. In this work, Parteck MXP and Kollicoat IR were used as water-soluble polymer bases for formulation development for 3D printing of various dosages incorporating cabozantinib while enabling immediate release. The effect of tablet design and the excipients sorbitol, croscarmellose sodium, and sodium starch glycolate was investigated for this goal. A way to calculate the size of tablets for predetermined dosages is proposed to enable the printing of individual strengths from one formulation. Rheological data were collected to deepen the understanding of the role of melt viscosity in 3D printing and hot melt extrusion processes. The production of immediate-release cabozantinib tablets containing every therapeutically relevant dosage in a single unit produced by two-step 3D printing was realized.

Continuously producible aztreonam-loaded inhalable lipid nanoparticles for cystic fibrosis-associated Pseudomonas aeruginosa infections - Development and in-vitro characterization.

Cystic fibrosis (CF) is a genetic disorder affecting nearly 105,000 patients worldwide and is characterized by poor respiratory function due to accumulation of thick mucus in the lungs, which not just acts as a physical barrier, but also provides a breeding ground for bacterial infections. These infections can be controlled with the help of antibiotics which can be delivered directly into the lungs for amplifying the local anti-bacterial effect. More than 50 % of CF patients are associated with Pseudomonas aeruginosa infection in their lungs which requires antibiotics such as Aztreonam (AZT). In this study, we prepared inhalable AZT-loaded lipid nanoparticles using Hot-melt extrusion (HME) coupled with probe sonication to target Pseudomonas aeruginosa infection in the lungs. The optimized nanoparticles were tested for physicochemical properties, stability profile, in-vitro aerosolization, and antimicrobial activity against Pseudomonas aeruginosa. The optimized nanoparticles with a PEI concentration of 0.1 % demonstrated a uniform particle size of <50 nm, a spherical shape observed under a transmission electron microscope, and >70 % drug entrapment. Incorporating cationic polymer, PEI, resulted in sustained drug release from the lipid nanoparticles. The in-vitro aerosolization studies exhibited a mass median aerodynamic diameter (MMAD) of <4.3 µm, suggesting deposition of the nanoparticles in the respirable airway. The antimicrobial activity against Pseudomonas aeruginosa showed the minimum inhibitory concentration of the formulation is 2-fold lower than plain AZT. Stability profile showed the formulations are stable after exposure to accelerated conditions. In conclusion, hot-melt extrusion in combination with probe sonication can be used as a potential method for the continuous production of AZT-loaded lipid nanoparticles with enhanced anti-bacterial activity.

EVA implants for controlled drug delivery to the inner ear.

This study evaluated the potential of poly(ethylene vinyl acetate) (EVA) copolymers as matrix formers in miniaturised implants, allowing to achieve controlled drug delivery into the inner ear. Due to the blood-cochlea barrier, it is impossible to reliably deliver a drug to this tiny and highly sensitive organ in clinical practice. To overcome this bottleneck, different EVA implants were prepared by hot melt extrusion, altering the vinyl acetate content and implant diameter. Dexamethasone was incorporated as a drug with anti-inflammatory and anti-fibrotic activity. Its release was measured into artificial perilymph, and the systems were thoroughly characterised before and after exposure to the medium by optical and scanning electron microscopy, SEM-EDX analysis, DSC, X-ray powder diffraction, X-ray microtomography and texture analysis. Notably, the resulting drug release rates were much higher than from silicone-based implants of similar size. Furthermore, varying the vinyl acetate content allowed for adjusting the desired release patterns effectively: With decreasing vinyl acetate content, the crystallinity of the copolymer increased, and the release rate decreased. Interestingly, the drug was homogeneously distributed as tiny crystals throughout the polymeric matrices. Upon contact with aqueous fluids, water penetrates the implants and dissolves the drug, which subsequently diffuses out of the device. Importantly, no noteworthy system swelling or shrinking was observed for up to 10 months upon exposure to the release medium, irrespective of the EVA grade. Also, the mechanical properties of the implants can be expected to allow for administration into the inner ear of a patient, being neither too flexible nor too rigid.

Thermal and mechanical performance assessment of composite (CPCM) for energy storage.

Phase change materials (PCMs) face obstacles in being widely used due to issues with heat transfer and maintaining their shape. In this research, instead of using binders, the Hexadecane (H) is melted in such a way that the capillary forces of the molten wax allow it to be impregnated into the low-density polyethylene (P) molecules and bind it together as a composite. It was found that the hot melt extrusion (HME) combines the two materials at the micro-scale, forming a phase change composite (CPCM) with various geometries that possesses superior latent heat and shape stability during phase transition. The structure can incorporate a higher percentage of PCM (60 %) using this method, which also results in lower costs. According to the thermal analysis, (H60P40) provides great thermal stability and can store a lot of energy per unit of weight. It has a high capacity of storing latent heat at 129.56 J/g and can also prevent Hexadecane leakage. Based on the mechanical properties results, hexadecane acts like plasticizer thus the addition of PCM decreases Young's modulus, stress in break, and stress at yield. This trend is observed as the PCM content increases. The high values of elongation at break also indicates the strong plasticizing properties of PCM. Based on the obtained results, the CPCMs as a potential candidate for an application in buildings for thermal regulation, reducing energy consumption, and reducing indoor temperature swing.

Enhanced Minor Ginsenoside Contents of Nano-Sized Black Korean Ginseng through Hot Melt Extrusion.

Black ginseng (BG), a traditional medicinal herb produced through a nine-stage steaming and drying process, exhibits stronger pharmacological efficacy, including antioxidant, anti-inflammatory, and anti-cancer properties, when compared to white and red ginseng. The ginsenosides in BG are classified as major and minor types, with minor ginsenosides demonstrating superior pharmacological properties. However, their low concentrations limit their availability for research and clinical applications. In this study, hot melt extrusion (HME) was utilized as an additional processing technique to enhance the content of minor ginsenoside in BG, and the physicochemical properties of the formulation were analyzed. Ginsenoside content in BG and HME-treated BG (HME-BG) was analyzed using high-performance liquid chromatography (HPLC), while their physicochemical properties were evaluated through dynamic light scattering (DLS), electrophoretic light scattering (ELS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Fourier-transform infrared spectroscopy (FT-IR). HME treatment resulted in a significant increase in minor ginsenosides Rg3 and compound K (CK) by 330% and 450%, respectively, while major ginsenosides Rg1 and Rb1 decreased or were not detected. Additionally, HME-BG demonstrated reduced particle size, improved PDI, and decreased crystallinity. HME treatment effectively converts major ginsenosides in BG into minor ginsenosides, enhancing its pharmacological efficacy and showing great potential for research and development applications.

Development of Hot Melt Extruded Co-Formulated Artesunate and AmodiaquineSoluplus® Solid Dispersion System in Fixed-Dose Form: Amorphous State Characterization and Pharmacokinetic Evaluation.

INTRODUCTION: This study aims to develop co-amorphous Solid Dispersion (SD) system containing antimalarials Artesunate (ARS) and Amodiaquine (AMQ) to improve its oral bioavailability employing the Hot Melt Extrusion (HME) technique. Soluplus® was selected as a polymeric excipient, whereas Lutrol F127, Lutrol F68, TPGS, and PEG400 as surfactants were incorporated along with Soluplus® to enhance extrudability, improve hydrophilicity, and improve the blend viscosity during HME. Soluplus® with surfactant combination successfully stabilizes both drugs during extrusion by generating SD because of its lower glass transition temperature (Tg) and viscoelastic behavior. METHODS: Physicochemical characterizations were performed using FTIR, DSC, TGA, and XRD, which confirmed the amorphousization of drugs in the SD system. The molecular level morphology of the optimized formulation was quantified using high-resolution techniques such as Atomic-Force Microscopy (AFM), Raman spectral, and mapping analysis. The transition of the crystalline drugs into a stable amorphous form has been demonstrated by 1H-NMR and 2D-NMR studies. The in vivo pharmacokinetics study in rats showed that the SD-containing drug-Soluplus-TPGS (FDC10) formulation has 36.63-56.13 (ARS-AMQ) folds increase in the Cmax and 41.87-54.34 (ARS-AMQ) folds increase AUC(0-72) as compared to pure drugs. RESULTS: Pharmacokinetic analysis shows that a fixed-dose combination of 50:135 mg of both APIs (ARSAMQ) significantly increased oral bioavailability by elevating Cmax and AUC, in comparison to pure APIs and also better than the marketed product Coarsucam®. CONCLUSION: Therefore, the developed melt extruded co-amorphous formulation has enhanced bioavailability and has more effectiveness than the marketed product Coarsucam®

.

Hot Melt Extruded High-Dose Amorphous Solid Dispersions Containing Lumefantrine and Soluplus.

Over the last 15 years, a small number of paediatric artemisinin-based combination therapy products have been marketed. These included Riamet® and Coartem® dispersible tablets, a combination of artemether and lumefantrine, co-developed by the Medicines for Malaria Venture and Novartis. Disappointingly, patient compliance, requirement for high-fat meal, and sporadic drug dissolution behaviours following administration still result in considerable challenges for these products. The first and foremost barrier that needs addressed for successful delivery of the artemether/lumefantrine combination is the poor solubility of lumefantrine within the gastrointestinal fluids. In this work, amorphous solid dispersions of lumefantrine within Soluplus®-based matrices have been manufactured using hot melt extrusion as a potential formulation strategy to achieve enhanced dissolution and apparent solubility. The drug loading capacity of Soluplus® to accommodate amorphous lumefantrine, whilst ensuring improved in-vitro dissolution performance, was investigated. The extrusion process employed a variety of processing parameters, including various temperature profiles and different production scales. The influence of variation in extrusion conditions upon the physical stability of manufactured amorphous solid dispersions was also examined. This allowed for a greater understanding of the role of extrusion processing conditions on the performance of supersaturated amorphous solid dispersions during dissolution and storage. This may allow for the design and manufacture of drug enabled formulations with lower drug dosing and thus a lower risk of adverse effects.

Investigation of the Influence of Copovidone Properties and Hot-Melt Extrusion Process on Level of Impurities, In Vitro Release, and Stability of an Amorphous Solid Dispersion Product.

Hot-melt extrusion (HME) is a widely used method for creating amorphous solid dispersions (ASDs) of poorly soluble drug substances, where the drug is molecularly dispersed in a solid polymer matrix. This study examines the impact of three different copovidone excipients, their reactive impurity levels, HME barrel temperature, and the distribution of colloidal silicon dioxide (SiO2) on impurity levels, stability, and drug release of ASDs and their tablets. Initial peroxide levels were higher in Kollidon VA 64 (KVA64) and Plasdone S630 (PS630) compared to Plasdone S630 Ultra (PS630U), leading to greater oxidative degradation of the drug in fresh ASD tablets. However, stability testing (50 °C, closed container, 50 °C/30% RH, open conditions) showed lower oxidative degradation impurities in ASD tablets prepared at higher barrel temperatures, likely due to greater peroxide degradation. Plasdone S630 is suitable for ASDs with drugs prone to oxidative degradation, while standard purity grades may benefit drugs susceptible to free radical degradation, as they generate fewer free radicals post-HME. ASD tablets exhibited greater physical stability than milled extrudate samples, likely due to reduced exposure to stability conditions within the tablet matrix. Including SiO2 in the extrudate composition resulted in greater physical stability of the ASD system in the tablet; however, it negatively affected chemical stability, promoting greater oxidative degradation and hydroxylation of the drug substance. No impact of the distribution of SiO2 on drug release was observed. The study also confirmed the congruent release of copovidone, the drug substance, and Tween 80 using flow NMR coupled with in-line UV/vis. This research highlights the critical roles of peroxide levels and SiO2 in influencing the dissolution and physical and chemical stability of ASDs. The findings provide valuable insights for developing stable and effective pharmaceutical formulations, emphasizing the importance of controlling reactive impurities and excipient characteristics in ASD products prepared by using HME.

Development of poly (lactic-co-glycolic acid) (PLGA) based implants using hot melt extrusion (HME) for sustained release of drugs: The impacts of PLGA's material characteristics.

Hot melt extrusion (HME) processed Poly (lactic-co-glycolic acid) (PLGA) implant is one of the commercialized drug delivery products, which has solid, well-designed shape and rigid structures that afford efficient locoregional drug delivery on the spot of interest for months. In general, there are a variety of material, processing, and physiological factors that impact the degradation rates of PLGA-based implants and concurrent drug release kinetics. The objective of this study was to investigate the impacts of PLGA's material characteristics on PLGA degradation and subsequent drug release behavior from the implants. Three model drugs (Dexamethasone, Carbamazepine, and Metformin hydrochloride) with different water solubility and property were formulated with different grades of PLGAs possessing distinct co-polymer ratios, molecular weights, end groups, and levels of residual monomer (high/ViatelTM and low/ ViatelTM Ultrapure). Physicochemical characterizations revealed that the plasticity of PLGA was inversely proportional to its molecular weight; moreover, the residual monomer could impose a plasticizing effect on PLGA, which increased its thermal plasticity and enhanced its thermal processability. Although the morphology and microstructure of the implants were affected by many factors, such as processing parameters, polymer and drug particle size and distribution, polymer properties and polymer-drug interactions, implants prepared with ViatelTM PLGA showed a smoother surface and a stronger PLGA-drug intimacy than the implants with ViatelTM Ultrapure PLGA, due to the higher plasticity of the ViatelTM PLGA. Subsequently, the implants with ViatelTM PLGA exhibited less burst release than implants with ViatelTM Ultrapure PLGA, however, their onset and progress of the lag and substantial release phases were shorter and faster than the ViatelTM Ultrapure PLGA-based implants, owing to the residual monomer accelerated the water diffusion and autocatalyzed PLGA hydrolysis. Even though the drug release profiles were also influenced by other factors, such as composition, drug properties and polymer-drug interaction, all three cases revealed that the residual monomer accelerated the swelling and degradation of PLGA and impaired the implant's integrity, which could negatively affect the subsequent drug release behavior and performance of the implants. These results provided insights to formulators on rational PLGA implant design and polymer selection.

Amorphous Polymer-Phospholipid Solid Dispersions for the Co-Delivery of Curcumin and Piperine Prepared via Hot-Melt Extrusion.

Curcumin and piperine are plant compounds known for their health-promoting properties, but their use in the prevention or treatment of various diseases is limited by their poor solubility. To overcome this drawback, the curcumin-piperine amorphous polymer-phospholipid dispersions were prepared by hot melt extrusion technology. X-ray powder diffraction indicated the formation of amorphous systems. Differential scanning calorimetry confirmed amorphization and provided information on the good miscibility of the active compound-polymer-phospholipid dispersions. Owing to Fourier-transform infrared spectroscopy, the intermolecular interactions in systems were investigated. In the biopharmaceutical properties assessment, the improvement in solubility as well as the maintenance of the supersaturation state were confirmed. Moreover, PAMPA models simulating the gastrointestinal tract and blood-brain barrier showed enhanced permeability of active compounds presented in dispersions compared to the crystalline form of individual compounds. The presented paper suggests that polymer-phospholipid dispersions advantageously impact the bioaccessibility of poorly soluble active compounds.

Amorphous Solid Dispersions: Implication of Method of Preparation and Physicochemical Properties of API and Excipients.

The present study investigated the effect of different polymers and manufacturing methods (hot melt extrusion, HME, and spray drying, SD) on the solid state, stability and pharmaceutical performance of amorphous solid dispersions. In the present manuscript, a combination of different binary amorphous solid dispersions containing 20% and 30% of drug loadings were prepared using SD and HME. The developed solid-state properties of the dispersions were evaluated using small- and wide-angle X-ray scattering (WAXS) and modulated differential scanning calorimetry (mDSC). The molecular interaction between the active pharmaceutical ingredients (APIs) and polymers were investigated via infrared (IR) and Raman spectroscopy. The in vitro release profile of the solid dispersions was also evaluated to compare the rate and extend of drug dissolution as a function of method of preparation. Thereafter, the effect of accelerated stability conditions on the physicochemical properties of the solid dispersions were also evaluated. The results demonstrated higher stability of Soluplus® (SOL) polymer-based solid dispersions as compared to hydroxypropyl methylcellulose (HPMC)-based solid dispersions. Moreover, the stability of the solid dispersions was found to be higher in the case of API having high glass transition temperature (Tg) and demonstrated higher interaction with the polymeric groups. Interestingly, the stability of the melt-extruded dispersions was found to be slightly higher as compared to the SD formulations. However, the down-processing of melt-extruded strands plays critical role in inducing the API crystal nuclei formation. In summary, the findings strongly indicate that the particulate properties significantly influence the performance of the product.

Impact of Hot-Melt Extrusion on Glibenclamide's Physical and Chemical States and Dissolution Behavior: Case Studies with Three Polymer Blend Matrices.

This research work dives into the complexity of hot-melt extrusion (HME) and its influence on drug stability, focusing on solid dispersions containing 30% of glibenclamide and three 50:50 polymer blends. The polymers used in the study are Ethocel Standard 10 Premium, Kollidon SR and Affinisol HPMC HME 4M. Glibenclamide solid dispersions are characterized using thermal analyses (thermogravimetric analysis (TGA) and differential scanning calorimetry), X-ray diffraction and scanning electron microscopy. This study reveals the transformation of glibenclamide into impurity A during the HME process using mass spectrometry and TGA. Thus, it enables the quantification of the extent of degradation. Furthermore, this work shows how polymer-polymer blend matrices exert an impact on process parameters, the active pharmaceutical ingredient's physical state, and drug release behavior. In vitro dissolution studies show that the polymeric matrices investigated provide extended drug release (over 24 h), mainly dictated by the polymer's chemical nature. This paper highlights how glibenclamide is degraded during HME and how polymer selection crucially affects the sustained release dynamics.

Scalability of API-Loaded Multifilament Yarn Production by Hot-Melt Extrusion and Evaluation of Fiber-Based Dosage Forms.

Fiber-based technologies are widely used in various industries, but their use in pharmaceuticals remains limited. While melt extrusion is a standard method for producing medical fibers such as sutures, it is rarely used for pharmaceutical fiber-based dosage forms. The EsoCap system is a notable exception, using a melt-extruded water-soluble filament as the drug release trigger mechanism. The challenge of producing drug-loaded fibers, particularly due to the use of spinning oils, and the processing of the fibers are addressed in this work using other approaches. The aim of this study was to develop processes for the production and processing of pharmaceutical fibers for targeted drug delivery. Fibers loaded with polyvinyl alcohol and fluorescein sodium as a model drug were successfully prepared by a continuous melt extrusion process and directly spun. These fibers exhibited uniform surface smoothness and consistent tensile strength. In addition, the fibers were further processed into tubular dosage forms using a modified knitting machine and demonstrated rapid drug release in a flow cell.

Preparation, Characterization and Evaluation of Nintedanib Amorphous Solid Dispersions with Enhanced Oral Bioavailability.

The dissolution and bioavailability challenges posed by poorly water-soluble drugs continue to drive innovation in pharmaceutical formulation design. Nintedanib (NDNB) is a typical BCS class II drug that has been utilized to treat idiopathic pulmonary fibrosis (IPF). Due to the low solubility, its oral bioavailability is relatively low, limiting its therapeutical effectiveness. It is crucial to enhance the dissolution and the oral bioavailability of NDNB. In this study, we focused on the preparation of amorphous solid dispersions (ASD) using hot melt extrusion (HME). The formulation employed Kollidon® VA64 (VA64) as the polymer matrix, blended with the NDNB at a ratio of 9:1. HME was conducted at temperatures ranging from 80 °C to 220 °C. The successful preparation of ASD was confirmed through various tests including polarized light microscopy (PLM), X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA). The in-vitro cumulative release of NDNB-ASD in 2 h in a pH 6.8 medium was 8.3-fold higher than that of NDNB (p < 0.0001). In a pH 7.4 medium, it was 10 times higher (p < 0.0001). In the in-vivo pharmacokinetic experiments, the area under curve (AUC) of NDNB-ASD was 5.3-fold higher than that of NDNB and 2.2 times higher than that of commercially available soft capsules (Ofev®) (p < 0.0001). There was no recrystallization after 6 months under accelarated storage test. Our study indicated that NDNB-ASD can enhance the absorption of NDNB, thus providing a promising method to improve NDNB bioavailability in oral dosages.

Scope and Application of Hot Melt Extrusion in the Development of Controlled and Sustained Release Drug Delivery Systems.

Controlled-release drug delivery systems (CRDDS) are more beneficial than conventional immediate release (IRDDS) for reduced intake, prolonged duration of action, lesser adverse effects, higher bioavailability, etc. The preparation of CRDDS is more complex than IRDDS. The hot melt extrusion (HME) technique is used for developing amorphous solid dispersion of poorly water soluble drugs to improve their dissolution rate and oral bioavailability. HME can be employed to develop CRDDS. Sustained release delivery systems (SRDDS), usually given orally, can also be developed using HME. This technique has the advantages of using no organic solvent, converting crystalline drugs to amorphous, improving bioavailability, etc. However, the heat sensitivity of drugs, miscibility between drug-polymer, and the availability of a few polymers are some of the challenges HME faces in developing CRDDS and SRDDS. The selection of a suitable polymer and the optimization of the process with the help of the QbD principle are two important aspects of the successful application of HME. In this review, strategies to prepare SRDDS and CRDDS using HME are discussed with its applications in research.

The comparison of melt technologies based on mesoporous carriers for improved carvedilol dissolution.

High-shear (HS) melt granulation and hot melt extrusion (HME) were compared as perspective melt-based technologies for preparation of amorphous solid dispersions (ASDs). ASDs were prepared using mesoporous carriers (SyloidⓇ 244FP or NeusilinⓇ US2), which were loaded with carvedilol dispersed in polymeric matrix (polyethylene glycol 6000 or SoluplusⓇ). Formulations with high carvedilol content were obtained either by HME (11 extrudates with polymer:carrier ratio 1:1) or HS granulation (6 granulates with polymer:carrier ratio 3:1). DSC and XRD analysis confirmed the absence of crystalline carvedilol for the majority of prepared ADSs, thus confirming the stabilizing effect of selected polymers and carriers over amorphous carvedilol. HME produced larger particles compared to HS melt granulation, which was in line with better flow time and Carr index of extrudates. Moreover, SEM images revealed smoother surface of ASDs obtained by HME, contributing to less obstructed flow. The rougher and more porous surface of HS granules was correlated to larger granule specific surface area, manifesting in faster carvedilol release from SyloidⓇ 244FP-based granules, as compared to their HME counterparts. Regarding dissolution, the two HS-formulations performed superior to pure crystalline carvedilol, thereby confirming the suitability of HS melt granulation for developing dosage forms with improved carvedilol dissolution.