ABSTRACT
Dissolved black carbon (DBC) plays a crucial role in the migration and bioavailability of iron in water. However, the properties of DBC releasing under diverse pyrolysis conditions and dissolving processes have not been systematically studied. Here, the compositions of DBC released from biochar through redox processes dominated by bacteria and light were thoroughly studied. It was found that the DBC released from straw biochar possess more oxygen-containing functional groups and aromatic substances. The content of phenolic and carboxylic groups in DBC was increased under influence of microorganisms and light, respectively. The concentration of phenolic hydroxyl groups increased from 10.0â¼57.5 mmol/gC to 6.6 â¼65.2 mmol/gC, and the concentration of carboxyl groups increased from 49.7â¼97.5 mmol/gC to 62.1 â¼113.3 mmol/gC. Then the impacts of DBC on pyrite dissolution and microalgae growth were also investigated. The complexing Fe3+ was proved to play a predominant role in the dissolution of ferrous mineral in DBC solution. Due to complexing between iron ion and DBC, the amount of dissolved Fe in aquatic water may rise as a result of elevated number of aromatic components with oxygen containing groups and low molecular weight generated under light conditions. Fe-DBC complexations in solution significantly promoted microalga growth, which might be attributed to the stimulating effect of dissolved Fe on the chlorophyll synthesis. The results of study will deepen our understanding of the behavior and ultimate destiny of DBC released into an iron-rich environment under redox conditions.
Subject(s)
Carbon , Charcoal , Iron , Oxidation-Reduction , Iron/chemistry , Charcoal/chemistry , Carbon/chemistry , Water Pollutants, Chemical/chemistryABSTRACT
Perfluoroalkyl substances (PFASs) are typical persistent organic pollutants, and their removal is urgently required but challenging. Photocatalysis has shown potential in PFASs degradation due to the redox capabilities of photoinduced charge carriers in photocatalysts. Herein, hexagonal ZnIn2S4 (ZIS) nanosheets were synthesized by a one-pot oil bath method and were well characterized by a series of techniques. In the degradation of sodium p-perfluorous nonenoxybenzenesulfonate (OBS), one kind of representative PFASs, the as-synthesized ZIS showed activity superior to P25 TiO2 under both simulated sunlight and visible-light irradiation. The good photocatalytic performance was attributed to the enhanced light absorption and facilitated charge separation. The pH conditions were found crucial in the photocatalytic process by influencing the OBS adsorption on the ZIS surface. Photogenerated e- and h+ were the main active species involved in OBS degradation in the ZIS system. This work confirmed the feasibility and could provide mechanistic insights into the degradation and defluorination of PFASs by visible-light photocatalysis.
Subject(s)
Fluorocarbons , Light , Photolysis , Fluorocarbons/chemistry , Nanostructures/chemistry , Catalysis , Water Pollutants, Chemical/chemistry , Zinc/chemistry , Indium/chemistry , Models, ChemicalABSTRACT
In the quest for effective solutions to address Environ. Pollut. and meet the escalating energy demands, heterojunction photocatalysts have emerged as a captivating and versatile technology. These photocatalysts have garnered significant interest due to their wide-ranging applications, including wastewater treatment, air purification, CO2 capture, and hydrogen generation via water splitting. This technique harnesses the power of semiconductors, which are activated under light illumination, providing the necessary energy for catalytic reactions. With visible light constituting a substantial portion (46%) of the solar spectrum, the development of visible-light-driven semiconductors has become imperative. Heterojunction photocatalysts offer a promising strategy to overcome the limitations associated with activating semiconductors under visible light. In this comprehensive review, we present the recent advancements in the field of photocatalytic degradation of contaminants across diverse media, as well as the remarkable progress made in renewable energy production. Moreover, we delve into the crucial role played by various operating parameters in influencing the photocatalytic performance of heterojunction systems. Finally, we address emerging challenges and propose novel perspectives to provide valuable insights for future advancements in this dynamic research domain. By unraveling the potential of heterojunction photocatalysts, this review contributes to the broader understanding of their applications and paves the way for exciting avenues of exploration and innovation.
Subject(s)
Environmental Restoration and Remediation , Environmental Restoration and Remediation/methods , Catalysis , Solar Energy , Sunlight , Semiconductors , Renewable Energy , Photochemical ProcessesABSTRACT
Airborne microplastics (MPs) are important pollutants that have been present in the environment for many years and are characterized by their universality, persistence, and potential toxicity. This study investigated the effects of terrestrial and marine transport of MPs in the atmosphere of a coastal city and compared the difference between daytime and nighttime. Laser direct infrared imaging (LDIR) and polarized light microscopy were used to characterize the physical and chemical properties of MPs, including number concentration, chemical types, shape, and size. Backward trajectories were used to distinguish the air masses from marine and terrestrial transport. Twenty chemical types were detected by LDIR, with rubber (16.7%) and phenol-formaldehyde resin (PFR; 14.8%) being major components. Three main morphological types of MPs were identified, and fragments (78.1%) are the dominant type. MPs in the atmosphere were concentrated in the small particle size segment (20-50 µm). The concentration of MPs in the air mass from marine transport was 14.7 items/m3 - lower than that from terrestrial transport (32.0 items/m3). The number concentration of airborne MPs was negatively correlated with relative humidity. MPs from terrestrial transport were mainly rubber (20.2%), while those from marine transport were mainly PFR (18%). MPs in the marine transport air mass were more aged and had a lower number concentration than those in the terrestrial transport air mass. The number concentration of airborne MPs is higher during the day than at night. These findings could contribute to the development of targeted control measures and methods to reduce MP pollution.
Subject(s)
Air Pollutants , Environmental Monitoring , Microplastics , China , Microplastics/analysis , Air Pollutants/analysis , Cities , Atmosphere/chemistry , Particle SizeABSTRACT
Carbon emissions resulting from energy consumption have become a pressing issue for governments worldwide. Accurate estimation of carbon emissions using satellite remote sensing data has become a crucial research problem. Previous studies relied on statistical regression models that failed to capture the complex nonlinear relationships between carbon emissions and characteristic variables. In this study, we propose a machine learning algorithm for carbon emissions, a Bayesian optimized XGboost regression model, using multi-year energy carbon emission data and nighttime lights (NTL) remote sensing data from Shaanxi Province, China. Our results demonstrate that the XGboost algorithm outperforms linear regression and four other machine learning models, with an R2 of 0.906 and RMSE of 5.687. We observe an annual increase in carbon emissions, with high-emission counties primarily concentrated in northern and central Shaanxi Province, displaying a shift from discrete, sporadic points to contiguous, extended spatial distribution. Spatial autocorrelation clustering reveals predominantly high-high and low-low clustering patterns, with economically developed counties showing high-emission clustering and economically relatively backward counties displaying low-emission clustering. Our findings show that the use of NTL data and the XGboost algorithm can estimate and predict carbon emissions more accurately and provide a complementary reference for satellite remote sensing image data to serve carbon emission monitoring and assessment. This research provides an important theoretical basis for formulating practical carbon emission reduction policies and contributes to the development of techniques for accurate carbon emission estimation using remote sensing data.
Subject(s)
Algorithms , Environmental Monitoring , Machine Learning , China , Environmental Monitoring/methods , Air Pollutants/analysis , Carbon/analysis , Bayes Theorem , Remote Sensing Technology , Air Pollution/statistics & numerical data , Air Pollution/analysisABSTRACT
Gossypiboma is an extremely rare adverse event occurring post-surgery, where surgical gauze is left within the body. If aseptically retained, it can lead to the formation of granulation tissue through chronic inflammation and adhesion with surrounding tissues, potentially persisting asymptomatically for many years. While diagnosis of this condition has been reported through various imaging modalities such as abdominal ultrasound and computed tomography, cases not presenting with typical findings are difficult for preoperative diagnosis, and instances where it is discovered postoperatively exist. Particularly when in contact with the gastrointestinal tract within the abdominal cavity, differentiation from submucosal tumors of the digestive tract becomes problematic. This report describes the imaging characteristics of endoscopic ultrasound and the usefulness of endoscopic ultrasound-fine-needle-aspiration for tissue diagnosis in the preoperative diagnosis of intra-abdominal gossypiboma.
ABSTRACT
Purpose: To study the association between tear film hyperosmolarity and ocular light scatter in a cataract surgery population. Patients and Methods: Contiguous, 20-second objective scatter index (OSI) scans were recorded in hyperosmolar (≥320 mOsm/L) and normal subjects (<308 mOsm/L) with cataract nuclear opacity ≥3. OSI was measured at screening, baseline and 90 days following surgery. Along with symptoms of ocular surface disease, slit-lamp examination included corneal staining (0-3), tear film breakup time (TBUT) and evaluation of meibomian gland disease (MGD). An additional cohort of hyperosmolar subjects were measured for OSI at screening, baseline, and 5, 10, 15 and 30 minutes following instillation of 0.18% sodium hyaluronate (HA). Results: Thirty-one eyes of 31 patients were included. There was a significant difference in post-operative OSI variation when comparing hyperosmolar (0.65±0.30, N=11) to normal subjects (0.33±0.11, N=10, p=0.005). Of note, there were no significant differences in OSI variation when subjects were sorted by staining (p=0.9), TBUT (p=0.7), symptoms (p=0.7), or MGD status (p=0.9). Instillation of 0.18% HA (N=10) did not alter OSI at 5 minutes, but significant reductions in OSI of 28.8%, 38.5% and 36.7% (all p < 0.001) were observed at 10, 15 and 30 minutes. Conclusion: Hyperosmolar patients exhibited significantly increased variation in light scatter following cataract surgery that was undifferentiated by staining or TBUT. Elevated osmolarity may be indicative of light scatter equivalent to that of a grade 2-3 cataract.
ABSTRACT
Background: Understanding the reproductive biology of weeds is crucial for managing them effectively. Diplachne fusca (Poaceae) is a widely distributed weed species that poses significant challenges to agricultural productivity. Nevertheless, it remains unclear how the soil seed bank of D. fusca responds to environmental shifts, and whether a dormancy cycle is present in this species. Methods: We investigated how seed dormancy in D. fusca is broken and how it responds to natural environmental changes. The impact of incubation temperature, light exposure, cold stratification at 4 °C, and gibberellic acid (GA3) on seed germination/dormancy-break was investigated, along with assessing seasonal changes in germinability through monthly excavation and laboratory incubation of buried seeds over 2 years. Results: Results indicated that newly ripened seeds of D. fusca were dormant, with germination facilitated by GA3, cold stratification, and after-ripening at ambient room conditions. Exposure to darkness inhibited germination. Seasonal patterns of germination were observed, with peak germination occurring in cooler months and a marked decline during the hot summer months. After 2 years of being buried, approximately 40% of the seeds remained viable. Conclusion: In summary, seeds of D. fusca exhibit non-deep physiological dormancy and maintain a persistent soil seed bank. Seeds buried in the soil undergo a yearly dormancy/non-dormancy cycle. This dormancy cycle prevents seed germination and seedling emergence in autumn, which boosts the survival of seedlings in less favorable seasons, yet it also makes it more challenging to eradicate this weed.
Subject(s)
Germination , Plant Dormancy , Plant Weeds , Seasons , Seeds , Plant Dormancy/physiology , Germination/physiology , Plant Weeds/physiology , Seeds/growth & development , Seeds/physiology , Poaceae/physiology , Gibberellins/metabolism , TemperatureABSTRACT
Photodynamic therapy (PDT) is internationally established as an approved treatment option for in situ forms of keratinocytic skin cancer (actinic keratoses, Bowen's disease, basal cell carcinoma). For these indications, there are standardized treatment protocols using narrow-spectrum light sources or (artificial) daylight, the use of which is associated with successful healing, a low rate of lesion recurrence, and a very good cosmetic result. Daylight PDT is superior to conventional PDT in terms of significantly less pain and associated higher patient acceptance. Newer indications, for which no approval has yet been granted, but which nevertheless have sufficient evidence of efficacy according to the study situation, are inflammatory (lichen sclerosus, acne) and infectious dermatoses (viral warts, cutaneous leishmaniasis, atypical mycobacteriosis). In addition, PDT is increasingly being used in aesthetic dermatology with the aim of skin rejuvenation.
ABSTRACT
OBJECTIVES: To determine the short-term (5 min) initial effects of a high-irradiance light-curing (LC) protocol on light transmission (LT%), radiant exposure (RE) and degree of conversion (DC%) of different bulk-fill resin-based composites (RBCs). MATERIALS AND METHODS: Six bulk-fill composites with different viscosities were investigated: OBF (One Bulk Fill, 3 M), EB (Estelite bulkfill,Tokuyama), PFill, PFlow, ECeram and EFlow (PowerFill, Poweflow, Tetric EvoCeram bulkfill, Tetric Evoflow bulkfill, Ivoclar), subjected to different LC protocols: one ultra-high-intensity (3 W/cm2 -3 s via PowerCure LCU) and two conventional (1.2 W/cm2 -10 s and 20 s via PowerCure and Elipar S10 LCUs). Specimens (n = 5) were polymerized within their molds (Ï5 mm × 4 mm depth) to determine LT% and RE at 4 mm using a MARC-LC spectrometer. For real-time DC% measurements by FTIR, similar molds were utilized. Data were analyzed by one-way ANOVA and Tukey post-hoc tests at 5 % significance. RESULTS: Regardless of the applied LC protocols, OBF and low-viscosity RBCs (EB, PFlow and EFlow) had the lowest and highest LT%, RE, DC% and RPmax, respectively. RE results of all RBCs were in the same sequence: Elipar-20 s > PCure-10 s > PCure-3 s. DC% of PFill and PFlow displayed no significant difference between the applied LC protocols (p > 0.05). The polymerization kinetic in all materials was well described by an exponential sum function (r2 varied between 0.85 and 0.98), showing a faster polymerization with the PCure-3 s protocol. SIGNIFICANCE: The measurement of LT% and DC% at 5 min gave an insight into the developing polymerization process. The initial response of these bulk-fill composite to a high-irradiation protocol varied depending on their composition and viscosity, being faster for low viscosity materials. Nevertheless, even though multiple resin composites are designed to be efficient during photopolymerization, care should be taken when selecting materials/curing protocol.
ABSTRACT
BACKGROUND: Light pollution appears to be a growing anthropogenic health threat, particularly in urban areas. Limited evidence suggests that exposure to outdoor artificial light at night (ALAN) may be associated with people's mental health by disrupting sleep-wake cycles. AIMS: We assessed 1) the association between ALAN exposure and adults' symptoms of depression and anxiety, 2) whether the association was modified by sex, age, and income, and 3) the mediating role of sleep problems. METHODS: We obtained cross-sectional data from 4,068 adults in Bulgarian cities. Depression and anxiety symptoms were measured using the 4-item Patient Health Questionnaire (PHQ-4). Sleep problems were self-reported based on three items. Outdoor ALAN at residential addresses was determined using annual radiance levels obtained from satellite imagery. Regression models were adjusted for person-level characteristics, green space, and nitrogen dioxide (NO2). We also assessed effect modification by sex, age, and income. Using mediation analyses, we tested sleep problems as a mediator of the ALAN-PHQ-4 association. RESULTS: Greater ALAN exposure in the fully adjusted model was marginally associated with higher PHQ-4 scores. We observed no effect modification. The mediator, sleep problems, was also positively associated with ALAN. The mediation of sleep problems was significantly positive. While the direct association was null, the total ALAN association was marginally and positively associated with PHQ-4 scores. CONCLUSIONS: Our findings suggest a positive association between outdoor light pollution and mental health. Poor sleep quality is a possible pathway relating ALAN exposure to mental health. Considering the increasing ubiquity and intensity of urban nighttime illumination, light pollution-reducing policies may provide significant health benefits for urban populations.
ABSTRACT
The development of effective multiphoton absorption (MPA) materials for near-infrared (NIR) light-driven photocatalysis holds great significance. In this study, we incorporated two multibranched cyclometallated iridium(III) modules with varying degrees of conjugation onto MPA-inert metal-organic frameworks (MOFs) to active MPA performance. Subsequently, the MOFs were further modified with Co(II) and hyaluronic acid (HA) to fabricate MINCH and MISCH, respectively. By introducing octupolar molecules and expanding the conjugation, MISCH exhibited a larger MPA cross section for efficient NIR light absorption and improved carrier transfer, leading to outstanding NIR light-driven multiphoton photocatalytic hydrogen production. Moreover, the HA modification enabled MISCH to achieve specific multiphoton photocatalytic hydrogen therapy for cancer cells. This study provides valuable insights into constructing highly active MPA materials for NIR light-driven photocatalysis, presenting a potential platform for hydrogen therapy in tumor treatment.
ABSTRACT
To evaluate the efficacy of yellow light-emitting diode (LED) irradiation at 590 nm, alone or in combination with anti-inflammatory active substances against ultraviolet (UV)-induced inflammation in keratinocytes. HaCaT keratinocytes were pretreated with LED yellow light (590 nm) alone or in combination with an antiinflammatory active substance such as glycerophosphoinositol choline (GC), extract of grains of paradise (Aframomum melegueta Schum, AM), or a bisabolol and ginger root extract mixture (Bb-GE) before UVB irradiation. Following each treatment, we measured the levels of inflammatory mediators secreted by keratinocytes. HaCaT keratinocytes treated with UVB (300 mJ cm-²) and then cultured for 24 h exhibited significantly upregulated expression of proinflammatory factors, including interleukin (IL)-1α, prostaglandin E2 (PGE2), and IL-8. After pretreatment with 590 nm LED, UVB-induced inflammatory responses were significantly inhibited. Co-pretreatment with 590 nm LED irradiation and GC further inhibited the expression of IL-1α and IL-8. IL-8 expression was inhibited by co-pretreatment with 590 nm LED irradiation and AM, whereas PGE2 expression was inhibited by co-pretreatment with 590 nm LED irradiation and Bb-GE. Co-treatment with 590 nm LED irradiation and various active substances modulated UVB-induced inflammation in keratinocytes, suggesting the potential application of this approach to prevent damage caused by voluntary sun exposure in daily life.
Subject(s)
Inflammation , Interleukin-8 , Keratinocytes , Ultraviolet Rays , Humans , Keratinocytes/radiation effects , Keratinocytes/drug effects , Keratinocytes/metabolism , Ultraviolet Rays/adverse effects , Interleukin-8/metabolism , Dinoprostone/metabolism , Interleukin-1alpha/metabolism , Plant Extracts/pharmacology , Sesquiterpenes/pharmacology , Lasers, Semiconductor/therapeutic use , Anti-Inflammatory Agents/pharmacology , Monocyclic Sesquiterpenes/pharmacology , HaCaT CellsABSTRACT
OBJECTIVE: Vulvovaginal Candidiasis (VVC) is a prevalent genital infection in women of reproductive age and requires effective non-drug therapies. Therefore, this study aimed to investigate the effect of blue light emitting diode (LED) therapy as an alternative treatment for recurrent VVC due to its proven antimicrobial properties. The safety and non-invasiveness of LED therapy make it a promising option for sensitive tissue applications. MATERIALS AND METHODS: This randomized controlled trial recruited 60 women with culture-confirmed VVC. Participants were randomly allocated to two groups. Group A (control group) received standard antifungal treatment with Gynoconazol 0.8% vaginal cream for three consecutive nights (n = 30). Group B (study group) received the same antifungal treatment plus two 60-min sessions of blue LED therapy directed at the vagina and vulva, with the sessions separated by two days (n = 30). Candida count (via CHROMagar™ Candida) and vaginal pH (via AD110-AD111 m) were assessed at baseline and one week after initiating treatment. RESULTS: Post-treatment, group (B) demonstrated a significantly greater reduction in Candida count compared to group (A) (mean difference (MD) 8.267; 95% Confidence Interval (CI) 6.723-9.811; p = 0.0001). However, there was no statistically significant difference in vaginal pH between the groups (MD -0.03; 95% CI -0.244-0.178; p = 0.749). CONCLUSION: Blue LED therapy effectively reduces Candida count in women with recurrent VVC without adversely affecting the vaginal pH, highlighting its safety and efficacy as a treatment modality.
Subject(s)
Candidiasis, Vulvovaginal , Humans , Female , Candidiasis, Vulvovaginal/therapy , Candidiasis, Vulvovaginal/drug therapy , Adult , Phototherapy/methods , Antifungal Agents/therapeutic use , Recurrence , Young Adult , Single-Blind Method , Treatment Outcome , Blue LightABSTRACT
Biomedical-device-associated infection (BAI) is undoubtedly a major concern and a serious challenge in modern medicine. Therefore, the development of biomedical materials that are capable of resisting or killing bacteria is of great importance. In this work, a croconaine-functionalized polymer with antifouling and near-infrared (NIR) photothermal bactericidal properties was prepared and facilely modified on polypropylene (PP) to combat medical device infections. Croconaine dye is elaborately modified as a "living" initiator, termed CR-4EBiB, for preparing amphiphilic block polymers by atom transfer radical polymerization (ATRP). In the formed polymer coating, the hydrophobic block can strongly adhere to the surface of the PP substrate, whereas the hydrophilic block is located on the outer layer by solvent-induced resistance to bacterial adhesion. Under the irradiation of an NIR laser (808 nm), the croconaine dye in the coating achieved maximum conversion of light to heat to effectively kill E. coli, S. aureus, and methicillin-resistant Staphylococcus aureus (MRSA). This work provides a facile and promising strategy for the development of implantable antibacterial biomedical materials.
ABSTRACT
BACKGROUND: Two-thirds of patients with immunoglobulin light chain (AL) amyloidosis have renal involvement. The biochemical profile of kidney damage is poorly described. METHODS: A cross-sectional study was conducted involving patients diagnosed with AL amyloidosis and renal involvement between January 1, 2010, and April 30, 2022 at the Hospital Italiano de Buenos Aires. Participants were retrospectively identified from the Institutional Amyloidosis Registry. Patients diagnosed with AL amyloidosis and evidence of renal involvement were included. Individuals with other types of amyloidosis were excluded. The selection process involved a thorough review of medical records and registry data to ensure accurate identification and inclusion of eligible participants. RESULTS: Seventy-seven patients were included. At diagnosis, 90% of the subjects had proteinuria, with a median of 4.3 g/24 h, 61% had renal failure, and 47% presented nephrotic syndrome. Semi-automated urinary electrophoresis revealed 55% with non-selective and 21% with moderately selective glomerular proteinuria. Urine immunofixation indicated 64% with lambda monoclonal free light chains and 12% with kappa. Serum immunofixation demonstrated 48% with lambda monoclonal type and 25% with lambda IgG. At the time of diagnosis of AL amyloidosis, the median age was 66 years (IQR 53-72) and 49% were men. In addition to kidney involvement, other organs were also affected: heart in 53%, gastrointestinal system in 19%, peripheral nervous system in 16%, and liver in 16% of patients. CONCLUSION: Our study provides a biochemical profile in renal amyloidosis due to immunoglobulin light chains in a Latin American population. Proteinuria emerged as the most common finding in this cohort with frequent multiorgan involvement.
ABSTRACT
PURPOSE: Given the potential role of light and its wavelength on ocular growth, this study investigated the effect of short-term exposure to red, cyan and blue light on ocular biometry in humans. METHODS: Forty-four young adults and 20 children, comprising emmetropes and myopes, underwent 2-h sessions of cyan (507 nm), red (638 nm) and broadband white light on three separate days via light-emitting glasses. Additionally, young adults were exposed to blue light (454 nm) on an additional day. Axial length (AL) and choroidal thickness (CT) were measured in the right eye before the light exposure (0 min), after 60 and 120 min of exposure and 30 min after light offset using an optical biometer and optical coherence tomographer, respectively. RESULTS: Compared to broadband light, exposure to red light resulted in a significant increase in AL (mean difference between white and red light at 120 min, +0.007 mm [0.002]), but no significant change in CT, while cyan light caused a significant AL reduction (-0.010 mm [0.003]) and choroidal thickening (+0.008 mm [0.002]) in young adults (p < 0.05). Blue light caused a significant decrease of -0.007 mm (0.002) in young adult eyes at 60 min (p < 0.05). In children, cyan light led to a significant reduction in AL (-0.016 mm [0.004]) and strong sustained choroidal thickening (+0.014 mm [0.004]) compared to broadband light at 120 min (p < 0.05). The effects of cyan light on AL and CT were found to be stronger in myopic young adults and emmetropic children. The opposing effects of red and cyan light on ocular biometry were similar between the two age groups (p > 0.05). CONCLUSIONS: Exposure to cyan light resulted in AL reduction and choroidal thickening in both young adults and children. Further research is needed to determine the application of these results in developing interventions for myopia control.
ABSTRACT
BACKGROUND: Acne is a chronic inflammatory skin disease. Photodynamic therapy (PDT) is a highly effective and safe drug-device combination treatment, typically using red and blue light. However, direct comparisons of aminolevulinic acid (ALA)-based PDT using these two light sources are lacking. Therefore, we compared the efficacy and adverse effects of ALA-based 450 nm blue laser-mediated PDT (BL-PDT) and 630 ± 10 nm red light-emitting diode-mediated PDT (RL-PDT) in the treatment of moderate-to-severe acne vulgaris, including analyses of different lesion types. METHODS: Sixteen patients with moderate-to-severe acne vulgaris were recruited. All patients underwent BL-PDT on the left side of the face and RL-PDT on the right side. Treatments were administered thrice at 2-week intervals, and follow-up continued for 2 weeks after the final treatment. The average rates of improvement in inflammatory and non-inflammatory acne lesions, IGA (Investigator's Global Assessment) scales, and IGA success rates were calculated. In addition, adverse effects during and after each treatment were recorded. RESULTS: At the 2-week follow-up after the final treatment, the average rates of improvement in total acne, inflammatory, and non-inflammatory lesions were 48.0%, 63.0%, and 30.0% in the BL-PDT group and 42.2%, 58.1%, and 27.5% in the RL-PDT group, respectively. The IGA scores for the two groups decreased by 1.8 and 1.7 points, respectively, and the IGA success rate was 53.3% in both groups. There were no significant differences between the BL-PDT and RL-PDT groups in any measure of effectiveness. However, the BL-PDT group exhibited more severe adverse effects, especially pain and hyperpigmentation. CONCLUSIONS: BL-PDT and RL-PDT have similar efficacies in moderate-to-severe acne vulgaris and are particularly effective for inflammatory acne lesions. RL-PDT benefits from milder adverse effects than those of BL-PDT.
ABSTRACT
Porphyrins-based porous organic polymers were widely used in photocatalytic oxidation under visible light owing to their superiority in the activation of oxygen. In contrast, the efficiency is usually limited due to the fast recombination and slow electron transfer. Herein, we report the use of a trioporphyrins-based covalent triazine framework (Por-CTF) as visible-light-active photocatalyst for the coupling oxidative of amines to imines at room temperature. By incorporating the π-conjugated porphyrin building block led to the enhanced electron transport between molecules, and the extended recombination time of excited electrons. The photocatalytic efficiency of Por-CTF is superior to that of polymer in absence of triazine framework (POP-TSP), which was prepared by radical polymerization using tetra-(4-vinylphenyl) porphyrin as monomer. Por-CTF catalyst presented excellent efficiency for various primary amines and stability. This work provides a reasonable guidance of catalyst molecular structure design for enhancing efficiency in the photocatalytic oxidation.