Semiconducting polymer nanoprodrugs enable tumor-specific therapy via sono-activatable ferroptosis.

Ferroptosis, a recently identified form of cell death, holds promise for cancer therapy, but concerns persist regarding its uncontrolled actions and potential side effects. Here, we present a semiconducting polymer nanoprodrug (SPNpro) featuring an innovative ferroptosis prodrug (DHU-CBA7) to induce sono-activatable ferroptosis for tumor-specific therapy. DHU-CBA7 prodrug incorporate methylene blue, ferrocene and urea bond, which can selectively and specifically respond to singlet oxygen (1O2) to turn on ferroptosis action via rapidly cleaving the urea bonds. DHU-CBA7 prodrug and a semiconducting polymer are self-assembled with an amphiphilic polymer to construct SPNpro. Ultrasound irradiation of SPNpro leads to the production of 1O2 via sonodynamic therapy (SDT) of the semiconducting polymer, and the generated 1O2 activated DHU-CBA7 prodrug to achieve sono-activatable ferroptosis. Consequently, SPNpro combine SDT with the controlled ferroptosis to effectively cure 4T1 tumors covered by 2-cm tissue with a tumor inhibition efficacy as high as 100 %, and also completely restrain tumor metastases. This study introduces a novel sono-activatable prodrug strategy for regulating ferroptosis, allowing for precise cancer therapy.

Controlled Release of Molecules to Enhance Cell Survival and Regeneration.

Controlled release or controlled drug delivery comprises the set of techniques and approaches to improve bioavailability through improved safety and/or efficacy using a carrier material for the molecule of interest. The predictability and tunability of these carriers make them ideal for protection, localization, and sustained presentation of a wide range of therapeutics, including growth factors implicated in cell survival and regeneration. Here we provide a method for encapsulating epidermal growth factor in a degradable polymer matrix for delivery to the cornea. Additional notes are included to demonstrate the wide-ranging capabilities of such methods for other materials, therapeutic agents, and sites of action within the eye.

4D Genome Analysis Using PHi-C2.

Hi-C methods reveal 3D genome features but lack correspondence to dynamic chromatin behavior. PHi-C2, Python software, addresses this gap by transforming Hi-C data into polymer models. After the optimization algorithm, it enables us to calculate 3D conformations and conduct dynamic simulations, providing insights into chromatin dynamics, including the mean-squared displacement and rheological properties. This chapter introduces PHi-C2 usage, offering a tutorial for comprehensive 4D genome analysis.

Effect of structure on sensing performance of nitro explosives with high sensitivity and mechanism of two Tb(III) coordination polymers.

The use of a conjugate N-containing ligand resulted in the decreasing of structural dimensions from 2D network of [Tb(2-pyia)(Ac)(H2O)] (CP1) to 1D chain [Tb(2-pyia)(Ac)(IDP)] (CP2) (2-H2pyia = 5-(pyridin-2-ylmethoxy) isophthalic acid and IDP=imidazo[4,5-f]-[1,10] phenanthroline). Both of them exhibit the characteristic luminescence of Tb ions and could have high fluorescence sensing properties for cefixime and fluridine. The different sensing properties for nitro explosives are manifested as CP1 for nitrobenzene and CP2 for 4-nitrophenol due to the difference in structure. Furthermore, CP2 exhibits the ratiometric fluorescence sensing for Fe3+ ion with a low detection limit of 0.405 µM. The fluorescence sensing mechanism of the two Tb complexes for different analytes was investigated using experimental methods and theoretical calculations. CP1 was used for the detection of Flu residues in the actual system and better results were obtained. The work shows the introduction of the chelated ligand might affect the structural and sensing performance changes of coordination polymers.

"All in one" lipid-polymer nanodelivery system for gene therapy of ischemic diseases.

Gene therapy offers a promising avenue for treating ischemic diseases, yet its clinical efficacy is hindered by the limitations of single gene therapy and the high oxidative stress microenvironment characteristic of such conditions. Lipid-polymer hybrid vectors represent a novel approach to enhance the effectiveness of gene therapy by harnessing the combined advantages of lipids and polymers. In this study, we engineered lipid-polymer hybrid nanocarriers with tailored structural modifications to create a versatile membrane fusion lipid-nuclear targeted polymer nanodelivery system (FLNPs) optimized for gene delivery. Our results demonstrate that FLNPs facilitate efficient cellular uptake and gene transfection via membrane fusion, lysosome avoidance, and nuclear targeting mechanisms. Upon encapsulating Hepatocyte Growth Factor plasmid (pHGF) and Catalase plasmid (pCAT), HGF/CAT-FLNPs were prepared, which significantly enhanced the resistance of C2C12 cells to H2O2-induced injury in vitro. In vivo studies further revealed that HGF/CAT-FLNPs effectively alleviated hindlimb ischemia-induced gangrene, restored motor function, and promoted blood perfusion recovery in mice. Metabolomics analysis indicated that FLNPs didn't induce metabolic disturbances during gene transfection. In conclusion, FLNPs represent a versatile platform for multi-dimensional assisted gene delivery, significantly improving the efficiency of gene delivery and holding promise for effective synergistic treatment of lower limb ischemia using pHGF and pCAT.

Boosting stable lithium deposition via Li3N-Enriched inorganic SEI induced by a polycationic polymer layer.

Lithium (Li) metal is a promising anode material for future high-energy rechargeable batteries due to its remarkable properties. Nevertheless, excess Li in traditional lithium metal anodes (LMAs) reduces the energy density of batteries and increases safety risks. Electrochemical pre-lithiation is an effective technique for regulating the lithium content of the anodes. However, Cu foil or other non-Li based substrates used for pre-lithiation often have inhomogeneous surfaces and high nucleation barrier, leading to uneven tip deposition of lithium metal and fragile SEI. Herein, we have designed an interfacial layer composed of nano-Si particles and cationic polymer (poly (diallyldimethylammonium chloride)) (denoted as Si@PDDA) to induce the formation of Li3N-rich inorganic SEI and regulate the homogeneous plating/stripping of lithium. The uniformly dispersed nano-Si particles can decrease the Li+ nucleation overpotential through alloying reaction with lithium. The surface of Si nano-particles modified by PDDA contains numerous cationic sites, providing an electrostatic shielding layer to seeding the growth of Li metal and inhibiting dendrites formation. More promisingly, PDDA adsorbs electrolyte anions while transporting Li+, significantly accelerating the decomposition kinetics of inorganic salts within the electrolyte. Therefore, a SEI film rich in Li3N was formed on the anodes, ensuring the excellent interfacial stability and electrochemical cycling performance of LMAs. The symmetrical cells exhibit a cycle life of 900 h at 1 mA cm-2. Moreover, the practical full cells operate at a low negative/positive (N/P) capacity ratio (∼3) for over 160 cycles.

Hierarchical assembly of thermoresponsive helical dendronized poly(phenylacetylene)s through photo-crosslinking of the thermal aggregates.

Supramolecular assembly of helical homopolymers to form stable chiral entities in water is highly valuable for creating chiral nanostructures and fabricating chiral biomaterials. Here we report on thermally induced supramolecular assembly of helical dendronized poly(phenylacetylene)s (PPAs) in aqueous solutions, and their in-situ photo-crosslinking at elevated temperatures to afford crosslinked nano-assemblies with hierarchical structures and stabilized helicities. These helical dendronized homopolymers carry cinnamate-cored dendritic oligoethylene glycol (OEG) pendants, which exhibit characteristic thermoresponsive behavior. Their thermal aggregation confers hexagonal packing of the polymer chains, and simultaneously resulting in enhancement of their chiralities. Assisted by radial amphiphilicity and worm-like molecular geometry, these dendronized PPAs form supramolecular twisted fibers, spheroid particles or toroids via thermal aggregation. Through UV photoirradiation above their cloud points (Tcps), cycloaddition of cinnamate moieties from the dendritic pendants promotes intermolecular crosslinking of dendronized PPA chains within the thermal aggregates, and simultaneously, the dynamic morphologies and supramolecular chirality from the dendronized PPAs through thermally induced aggregation can be fixed. In addition, photo-crosslinking can be occurred solely within individual aggregates due to the protection of densely packed dendritic OEGs. Therefore, various crosslinked assemblies from the dendronized homopolymers with tailorable morphologies and stabilized chirality are fabricated by tuning their thermally induced dynamic aggregations followed by in-situ photo-crosslinking. We believe that this work paves a convenient route to fabricate chiral assemblies with stabilized morphologies and fixed chiralities from dynamic helical homopolymers through intermolecular crosslinking, which can be promising for various chiral applications.

3D printing of highly conductive and strongly adhesive PEDOT:PSS hydrogel-based bioelectronic interface for accurate electromyography monitoring.

PEDOT: PSS hydrogel-based bioelectronic interfaces have gained significant attention in various fields including biomedical devices, wearable devices, and epidermal electronics. However, the development of high-performance bioelectronic interfaces that integrate excellent conductivity, strong adhesion, and advanced processing compatibility remains a challenge. Herein, we develop a high-performance bioelectronic interface by 3D printing of a novel poly(vinyl alcohol-formaldehyde) (PVAF)-PEDOT:PSS composite ink. Such a PEDOT:PSS-PVAF ink exhibits favorable rheological properties for direct-ink-writing 3D printing, enabling the fabrication of high-resolution patterns and three-dimensional structures with high aspect ratios. Hydrogel bioelectronic interface printed by such PEDOT:PSS-PVAF ink simultaneously achieves high conductivity (over 100 S m-1), strong adhesion (31.44 ± 7.07 kPa), as well as stable electrochemical performance (charge injection capacity of 13.72 mC cm-2 and charge storage capacity of 18.80 mC cm-2). We further integrate PEDOT:PSS-PVAF hydrogel bioelectronic interface to fabricate adhesive skin electrodes for electromyography (EMG) signal recording. The resultant EMG skin electrodes demonstrate superior performance and stability compared to commercial products, maintaining high signal-to-noise ratio of > 10 dB under varying weights and repetitive motions. These advantageous performance of PEDOT:PSS-PVAF based hydrogel bioelectronic interfaces may be helpful for diverse bioelectronic applications like healthcare monitoring and epidermal bioelectronics.

Recent Advances in Nanodrug Delivery Systems Production, Efficacy, Safety, and Toxicity.

In the last three decades, the development of nanoparticles or nano-formulations as drug delivery systems has emerged as a promising tool to overcome the limitations of conventional delivery, potentially to improve the stability and solubility of active molecules, promote their transport across the biological membranes, and prolong circulation times to increase efficacy of a therapy. Despite several nano-formulations having applications in drug delivery, some issues concerning their safety and toxicity are still debated. This chapter describes the recent available information regarding safety, toxicity, and efficacy of nano-formulations for drug delivery. Several key factors can influence the behavior of nanoparticles in a biological environment, and their evaluation is crucial to design non-toxic and effective nano-formulations. Among them, we have focused our attention on materials and methods for their preparation (including the innovative microfluidic technique), mechanisms of interactions with biological systems, purification of nanoparticles, manufacture impurities, and nano-stability. This chapter places emphasis on the utilization of in silico, in vitro, and in vivo models for the assessment and prediction of toxicity associated with these nano-formulations. Furthermore, the chapter includes specific examples of in vitro and in vivo studies conducted on nanoparticles, illustrating their application in this field.

Polymeric Vehicles for Nucleic Acid Delivery: Enhancing the Therapeutic Efficacy and Cellular Uptake.

BACKGROUND: Therapeutic gene delivery may be facilitated by the use of polymeric carriers. When combined with nucleic acids to form nanoparticles or polyplexes, a variety of polymers may shield the cargo from in vivo breakdown and clearance while also making it easier for it to enter intracellular compartments. AIM AND OBJECTIVES: Polymer synthesis design choices result in a wide variety of compounds and vehicle compositions. Depending on the application, these characteristics may be changed to provide enhanced endosomal escape, longer-lasting distribution, or stronger connection with nucleic acid cargo and cells. Here, we outline current methods for delivering genes in preclinical and clinical settings using polymers. METHODOLOGY: Significant therapeutic outcomes have previously been attained using genetic material- delivering polymer vehicles in both in-vitro and animal models. When combined with nucleic acids to form nanoparticles or polyplexes, a variety of polymers may shield the cargo from in vivo breakdown and clearance while also making it easier for it to enter intracellular compartments. Many innovative diagnoses for nucleic acids have been investigated and put through clinical assessment in the past 20 years. RESULTS: Polymer-based carriers have additional delivery issues due to their changes in method and place of biological action, as well as variances in biophysical characteristics. We cover recent custom polymeric carrier architectures that were tuned for nucleic acid payloads such genomemodifying nucleic acids, siRNA, microRNA, and plasmid DNA. CONCLUSION: In conclusion, the development of polymeric carriers for gene delivery holds promise for therapeutic applications. Through careful design and optimization, these carriers can overcome various challenges associated with nucleic acid delivery, offering new avenues for treating a wide range of diseases.

Nanoenabled Antiviral Pesticide for Tobacco Mosaic Virus: Excellent Adhesion Performance and Strong Inhibitory Effect to Alleviate the Damage on Photosynthetic System.

Tobacco mosaic virus (TMV) is a major agricultural threat. Here, a cationic star polymer (SPc) was designed to construct an efficient nanodelivery system for moroxydine hydrochloride (ABOB). ABOB could self-assemble with SPc via a hydrogen bond and van der Waals force, and this complexation reduced the particle size of ABOB from 2406 to 45 nm. With the aid of SPc, the contact angle of ABOB decreased from 100.8 to 79.0°, and its retention increased from 6.3 to 13.8 mg/cm2. Furthermore, the complexation with SPc could attenuate the degradation of ABOB in plants, and the bioactivity of SPc-loaded ABOB significantly improved with a reduction in relative viral expression from 0.57 to 0.17. The RNA-seq analysis revealed that the ABOB/SPc complex could up-regulate the expression of growth- and photosynthesis-related genes in tobacco seedlings, and the chlorophyll content increased by 2.5 times. The current study introduced an efficient nanodelivery system to improve the bioactivity of traditional antiviral agents.

In Situ Forming Asymmetric Gel Polymer Electrolyte Enhances the Performance of High-Voltage Lithium Metal Batteries.

With the rapid evolution of electric vehicle technology, concerns regarding range anxiety and safety have become increasingly pronounced. Battery systems with high specific energy and enhanced security, featuring ternary cathodes paired with lithium (Li) metal anodes, are poised to emerge as next-generation electrochemical devices. However, the asymmetric configuration of the battery structure, characterized by the robust oxidative behavior of the ternary cathodes juxtaposed with the vigorous reductive activity of the Li metal anodes, imposes elevated requisites for the electrolytes. Herein, a well-designed gel polymer electrolyte with asymmetric structure was successfully prepared based on the Ritter reaction of cyanoethyl poly(vinyl alcohol) (PVA-CN) and cationic ring-opening polymerization of s-Trioxane. With the aid of the sieving effect of separator, the in situ asymmetric gel polymer electrolyte has good compatibility with both the high-voltage cathodes and Li anodes. The amide groups generated by PVA-CN after the Ritter reaction and additional cyano groups can tolerate high voltages up to 5.1 V, matching with ternary cathodes without any challenges. The functional amide and cyano groups participate in the formation of the cathode electrolyte interface and stabilize the cathode structure. Meanwhile, the in situ formed ether-based polyformaldehyde electrolyte is beneficial for promoting uniform Li deposition on anode surfaces. Li-Li symmetric cells demonstrate sustained stability over 2000 h of cycling at a current density of 1 mA cm-2 for 1 mAh cm-2. Furthermore, the capacity retention rate of Li(Ni0.6Mn0.2Co0.2)O2-Li cells with 0.5 C cycling after 300 cycles is 92.2%, demonstrating excellent cycle stability. The electrolyte preparation strategy provides a strategy for the progress of high-performance electrolytes and promotes the rapid development of high-energy-density Li metal batteries.

Rational Design of Highly Porous Donor-Acceptor Based Conjugated Microporous Polymer for Photocatalytic Benzylamine Coupling Reaction.

Conjugated microporous polymers (CMPs) are an important class of organic materials with several useful features like, inherent nanoscale porosity, large specific surface area and semiconducting properties, which are very demanding for various sustainable applications. Carbazole building blocks are extensively used in designing photocatalysts due to easy electron donation and hole transportation. In the current study, a new CMP material CBZ-CMP containing carbazole unit used for photocatalytic C═N coupling reaction under blue light irradiation is designed. The CBZ-CMP framework is made through the polycondensation of 4,4'-di(9H-carbazol-9-yl)-1,1'-biphenyl using FeCl3 as a catalyst. The CBZ-CMP shows very high BET surface area of 1536 m2 g-1 together with unimodal porosity (ca. 1.7 nm supermicropore), nanowire-like particle morphology (16-18 nm diameter), and low band gap property. The bi-phenyl moiety functions as the electron accepting center and the carbazole unit acts as the donor center, which accounts for the low band gap energy of CBZ-CMP. This nanoporous semiconducting CBZ-CMP material for photocatalytic benzylamine coupling reaction is explored, where it shows good conversion together with high selectivity under mild reaction conditions. This study offers simple method of preparation of a D-A-D-based porous photocatalyst for sustainable synthesis of value-added organics.

Confined Polyethylene Glycol Anchored in Kaolinite as High Ionic Conductivity Solid-State Electrolyte for Lithium Batteries.

Solid-state electrolytes (SSEs) have garnered significant attention as critical materials for enabling safer, energy-dense, and reversible electrochemical energy storage in batteries. Among the various types of solid electrolytes developed, composite polymer electrolytes (CPEs) have stood out as some of the most promising candidates due to their well-rounded performance. In this study, we choose polyethylene glycol (PEG) as the covalent grafting intercalant and lithium perchlorate as carrier source to prepare a fast lithium ion conductor, K-PEG-Li doped with clay-based active filler as a CPE. The CPE exhibits excellent lithium conduction (4.36 × 10-3 S cm-1 at 25 °C and 3.32 × 10-2 S cm-1 at 115 °C), great mechanical performance with good tensile strength (6.07 MPa) and toughness (strain 313%), and convincing flame-retardancy. These outstanding conducting and mechanical functionalities indicate that such a clay-based active filler doped composite polymer electrolyte will find promising application in solid-state lithium batteries.

One-month DAPT after biodegradable-polymer everolimus-eluting stent implantation in women at high-bleeding risk: Insights from the POEM trial.

AIMS: We conducted a prespecified subanalysis of the POEM trial to assess the association between sex and clinical outcomes following a short 1-month dual-antiplatelet-therapy (DAPT) period after percutaneous coronary intervention (PCI) with bioresorbable polymer everolimus-eluting stent (BP-EES) among patients at high bleeding risk (HBR). BACKGROUND: Shortening the DAPT period after PCI is an effective bleeding avoidance strategy with contemporary drug-eluting stents. Whether sex affects the risk of adverse events following PCI is still debated. METHODS: Patients at HBR undergoing PCI with BP-EES were enrolled and treated with 1-month DAPT. If anticoagulation was needed, study participants received an oral anticoagulant (OAC) in addition to a P2Y12 inhibitor for 1 month, followed by OAC only thereafter. The primary endpoint was a composite of cardiac death, myocardial infarction, or definite/probable stent thrombosis at 12 months. We report sex-based outcomes of patients included in the POEM study. RESULTS: We enrolled 129 (29.1%) women and 314 (70.9%) men. Women were older, with lower hemoglobin levels, and worse renal function. Accordingly, they had a trend for a greater number of HBR criteria fulfilled and a higher PARIS bleeding score. However, they were not at a significantly higher risk for the primary endpoint (men vs. women: 5.17% vs. 3.94%; HR 1.30; 95% CI: 0.48-3.54, p = 0.61), or any of the hemorrhagic and ischemic secondary endpoints. CONCLUSIONS: This prespecified subanalysis of the POEM trial suggests that 1-month DAPT following PCI with BP-EES may be a safe and effective therapeutic strategy for women at HBR.

Immunodetection of Poorly Soluble Substances: Limitations and Their Overcoming.

Immunoassays based on the specific antigen-antibody interactions are efficient tools to detect various compounds and estimate their content. Usually, these assays are implemented in water-saline media with composition close to physiological conditions. However, many substances are insoluble or cannot be molecularly dispersed in such media, which objectively creates problems when interacting in aquatic environments. Thus, obtaining immunoreactants and implementing immunoassays of these substances need special methodological solutions. Hydrophobicity of antigens as well as their limited ability to functionalization and conjugation are often overlooked when developing immunoassays for these compounds. The main key finding is the possibility to influence the behavior of hydrophobic compounds for immunoassays, which requires specific approaches summarized in the review. Using the examples of two groups of compounds-surfactants (alkyl- and bisphenols) and fullerenes, we systematized the existing knowledge and experience in the development of immunoassays. This review addresses the challenges of immunodetection of poorly soluble substances and proposes solutions such as the use of hydrotropes, other solubilization techniques, and alternative receptors (aptamers and molecularly imprinted polymers).

Time and Temperature Dependence of Drug Crystallization─The Role of Molecular Mobility.

Using the time-temperature-transformation diagrams, we demonstrated a correlation between molecular mobility and crystallization in amorphous solid dispersions of nifedipine (NIF) with each polyvinylpyrrolidone vinyl acetate (PVPVA64) and polyvinyl caprolactam polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus). The behavior was compared with the NIF dispersions prepared with each polyvinylpyrrolidone (PVP) and hydroxypropyl methylcellulose acetate succinate (HPMCAS) [Lalge et al., Mol. Pharmaceutics 2023, 20(3), 1806-1817]. Each system was characterized by a unique temperature at which the crystallization onset time was the shortest. Below this temperature, a coupling was observed between the α-relaxation time determined by dielectric spectroscopy and crystallization onset time. Above this temperature, the activation barrier for crystallization had a more significant role than molecular mobility. In the solid state, PVP and PVPVA64 dispersion exhibited higher resistance to crystallization than HPMCAS and Soluplus. The role of polymers in inhibiting crystal growth in nucleated systems was discerned by monitoring crystallization following wetting of the amorphous dispersion with the dissolution medium. PVPVA64 and Soluplus dispersions exhibited higher resistance to crystal growth than PVP and HPMCAS.

Insights into Thermal Conductivity at the MOF-Polymer Interface.

Understanding the thermal conductivity in metal-organic framework (MOF)-polymer composites is crucial for optimizing their performance in applications involving heat transfer. In this work, several UiO66-polymer composites (where the polymer is either PEG, PVDF, PS, PIM-1, PP, or PMMA) are examined using molecular simulations. Our contribution highlights the interface's impact on thermal conductivity, observing an overall increasing trend attributable to the synergistic effect of MOF enhancing polymer thermal conductivity. Flexible polymers such as PEG and PVDF exhibit increased compatibility with the MOF, facilitating their integration with the MOF lattice. However, this integration leads to a moderated enhancement in thermal conductivity compared to polymers that remain separate from the MOF structure, such as PS or PP. This effect can be attributed to alterations in phonon transport pathways and shifts in interfacial interactions between the polymer and MOF. Specifically, the infiltration of the polymer like PEG and PVDF into the MOF disrupted the MOF's ordered network, introducing defects or barriers that hindered phonon propagation. In contrast, nonpolar and rigid polymers like PP, PMMA, PS, and PIM-1 exhibited greater improvements in thermal conductivity when combined with MOFs compared to the flexible polymers PVDF and PEG. Most notably, our analysis identifies a critical interface region within approximately 30-50 Å that profoundly influences thermal conductivity. The interface region, as indicated by the density profile and radius of gyration, is notably shorter but plays a pivotal role in modulating the thermal properties. The sensitivity of the system to these interface characteristics underscores the crucial role of this particular interface area in dictating the thermal conductivity. Our findings emphasize the sensitivity of thermal conductivity in polymer matrices to interface characteristics and highlight the critical role of a specific interface region in modulating thermal properties.

A Hydroxyquinoline Polymer with Excellent Amyloidosis Inhibition and Protein Delivery Ability to Combat Amyloid-ß-Mediated Neurotoxicity.

The accumulation of abnormal protein deposits known as amyloid-ß (Aß) plaques contributes to the development and progression of Alzheimer's disease. Aggregated Aß exacerbates oxidative stress by stimulating the production of reactive oxygen species (ROS) in a detrimental feedback loop. 8-Hydroxyquinoline (8-HQ) is recognized for its ability to inhibit or reverse Aß aggregation and reduce neurotoxicity. Here, an 8-HQ-based polymer, DHQ, was developed to combat Aß-mediated neurotoxicity by delivering an antioxidant enzyme. DHQ efficiently delivers superoxide dismutase into targeted cells, thereby downregulating the intracellular ROS level. Additionally, the polymer effectively inhibits the fibrillization of three proteins involved in fibrosis, ß-lactoglobulin (BLG), insulin, and Aß1-40, at nanomolar concentrations. Cell culture models demonstrated that DHQ reduces ROS levels induced by Aß1-40 aggregation, rescuing cell viability and preventing apoptosis. Intracellular delivery of SOD further enhanced the ability to maintain the ROS homeostasis. This polymer offers a multifaceted approach to treating diseases associated with amyloidosis.

Clustered ultra-small iron oxide nanoparticles as potential T1/T2dual-modal magnetic resonance imaging contrast agents and application to tumor model.

Many studies have been conducted on the use of ultra-small iron oxide nanoparticles (USIONs) (d < 3 nm) as potential positive magnetic resonance imaging (MRI)-contrast agents (CAs); however, there is dearth of research on clustered USIONs. In this study, nearly monodispersed clustered USIONs were synthesized using a simple two-step one-pot polyol method. First, USIONs (d = 2.7 nm) were synthesized, and clustered USIONs (d = 27.9 nm) were subsequently synthesized through multiple cross-linking of USIONs with poly(acrylic acid-co-maleic acid) (PAAMA) polymers with many -COOH groups. The clustered PAAMA-USIONs exhibited very weak ferromagnetism owing to the magnetic interaction between superparamagnetic USIONs; this was evidenced by their appreciable r1= 3.9 s‒1mM‒1and high r2/r1ratio of 14.6. Their ability to function as a dual-modal T1/T2MRI-CA in T1-weighted MRI was demonstrated when they simultaneously exhibited positive and negative contrasts in T1-weighted MRI of tumor model mice after intravenous injection. They displayed positive contrasts at the kidneys, bladder, heart, and aorta and negative contrasts at the liver and tumor. .