ABSTRACT
Designing persistent dual-band afterglow materials with thermally activated delayed fluorescence (TADF) and room temperature phosphorescence (RTP) contributed to solving the problems of homogenization and singularity in long afterglow materials. Here, six aryl acetonitrile (CBM) and aryl dicyanoaniline (AMBT) derivatives, used as host and guest materials respectively, were successfully designed and synthesized based on the isomerization effect. Among of them, 0.1 % m-CBM/p-AMBT showed the longest dual-band TADF (540 ms) and RTP lifetimes (721 ms), as well as persistent afterglow over 8 s, whose fluorescence (ΦFL), TADF (ΦT) and RTP (ΦP) quantum yields were 0.11, 0.06 and 0.22 in sequence. More interestingly, some doping systems constructed by CBM and AMBT series compounds showed persistent triple-band emissions composed of TADF, unimolecular and aggregated AMBT series compounds. What's more, ΦFL, ΦT and ΦP of 1 % o-AMBT@PMMA film were up to 0.17, 0.17, 0.23 in turn, with TADF, RTP and afterglow lifetimes of 606 ms, 727 ms, and 10 s respectively. TADF and RTP emission of CBM/AMBT series doping systems was attributed to host sensitized guest emission. Besides, the comparison displayed AMBT series compounds had bigger intensity ratios between TADF and RTP emission in PMMA films compared to in CBM series compounds. Finally, a series of data encryption were successfully constructed based on different afterglow lifetimes of the doping systems, and a dynamic anti-counterfeiting pattern was prepared by using different temperature responses of TADF and RTP emissions.
ABSTRACT
Organic red/near-infrared (NIR) room temperature phosphorescence (RTP) materials with low toxicity and facile synthesis are highly sought after, particularly for applications in biotechnology and encryption. However, achieving efficient red/NIR RTP emitters has been challenging due to the weak spin-orbit coupling of organics and the rapid nonradiative decay imposed by the energy gap law. Here we demonstrate highly efficient red/ NIR RTP with boosted quantum yields (Φp) of up to 32.96% through doping the thionated derivatives of phthalimide (PAI) (MTPAI and DTPAI) into PAI crystals. The red-shifted photoluminescence (PL) stems from a combination of the external heavy atom effect and the formation of emissive clusters centered around electron-rich sulfur atoms. Furthermore, the dopants enhance exciton generation efficiency and facilitate energy transfer from smaller PAI units to larger aggregates, leading to dramatically increased Φp. This strategy proves universal, opening possibilities for acquiring long-wavelength RTP with tunable photophysical properties. The doped crystals exhibit promising applications in optical waveguides and encryption paper/ink. This research provides a practical approach to obtaining long-wavelength RTP materials and offers valuable insights into the mechanisms governing host-guest systems.
ABSTRACT
Zero-dimensional (0D) hybrid metal halides have been emerged as room-temperature phosphorescence (RTP) materials, but synchronous optimization of multiple phosphorescence performance in one structural platform remains less resolved, and stable RTP activity in aqueous medium is also unrealized due to serious instability toward water and oxygen. Herein, we demonstrated a photophysical tuning strategy in a new 0D hybrid zinc halide family of (BTPP)2ZnX4 (BTPP = benzyltriphenylphosphonium, X = Cl and Br). Infrequently, the delicate combination of organic and inorganic species enables this family to display multiple ultralong green afterglow and efficient self-trapped exciton (STE) associated cyan phosphorescence. Compared with inert luminescence of [BTPP]+ cation, incorporation of anionic [ZnX4]2- effectively enhance the spin-orbit coupling effect, which significantly boosts the photoluminescence quantum yield (PLQY) up to 30.66% and 54.62% for afterglow and phosphorescence, respectively. Synchronously, the corresponding luminescence lifetime extend to 143.94 ms and 0.308 µs surpassing the indiscernible phosphorescence of [BTPP]X salt. More importantly, this halide family presents robust RTP emission with nearly unattenuated PLQY in water and harsh condition (acid and basic aqueous solution) over half a year. The highly efficient integrated afterglow and STE phosphorescence as well as ultrahigh aqueous state RTP realize multiple anti-counterfeiting applications in wide chemical environments.
ABSTRACT
Monosubstituted 9-(2-bromophenyl)-carbazole (1Br1CZ) and disubstituted 9,9'-(2,4-dibromo-1,3-phenylene) bis(9H-carbazole) (2Br2CZ) are synthesized by introducing bromine into ortho-phenyl position of 9-phenyl-carbazole (PhCZ). The decomposition temperature with 5% mass loss and melting point of 2Br2CZ crystal are 360 and 230 °C. The highest occupied molecular orbital energy level of PhCZ is the highest, and that of 2Br2CZ is the lowest. The crystals of PhCZ, 1Br1CZ, and 2Br2CZ are monoclinic, orthorhombic, and triclinic system, which exhibit room temperature phosphorescence with lifetimes of 171.81, 37.15, and 28.77 ms, and their corresponding phosphorescence quantum yields are 0.83%, 0.16%, and 4.58%. It theoretically reveals that six triplet energy levels (T1-T6) exist under S1 in 2Br2CZ crystal, and the spin orbit coupling constants between S1 and Tn in 2Br2CZ are also greater than those in PhCZ and 1Br1CZ, which promotes the intersystem crossing. Meanwhile, through crystal structure and Hirshfeld surface analysis, the torsion angles between the carbazole unit of 2Br2CZ and the central phenyl group reached 85.28°. The 2Br2CZ crystal exhibits the richest intermolecular interactions. A cavity of 4.498 Å is formed within the crystal skeleton of 2Br2CZ, which can precisely fixe dichloromethane with a record-high desorption temperature over 145 °C.
ABSTRACT
We studied spectral properties of 1,N2-etheno-2-aminopurine after immobilization in poly (vinyl alcohol) films. The absorption spectrum of 1,N2-ε2APu consists of two peaks centered at 300 and 370 nm, and the fluorescence spectrum has maximum at about 460 nm. The fluorescence quantum efficiency is 62%. The fluorescence anisotropy reaches a value of 0.3 at longer wavelengths, while it is low at shorter wavelengths (corresponding to the second single excited state). The 1,N2-ε2APu has a relatively long fluorescence lifetime of about 16 ns and a noticeable room temperature phosphorescence with a lifetime of about 220 ms. A broad phosphorescence emission band (425-675 nm) is centered at about 530 nm and markedly overlaps with fluorescence at shorter wavelengths. Surprisingly, the phosphorescence excitation spectrum of 1,N2-ε2APu-doped poly (vinyl alcohol) film differs from the absorption and fluorescence excitation spectra. The strongest room temperature phosphorescence excitation is about 335 nm. At longer excitation wavelengths, above 450 nm, where fluorescence cannot be excited, a triplet excitation is still possible. The 1,N2-ε2APu phosphorescence anisotropy spectra confirm direct triplet state excitation. The ability to excite molecules at long wavelengths can find applications in the study of biological molecules that are unstable when excited at high energies.
Subject(s)
Luminescence , Polyvinyl Alcohol , Temperature , Polyvinyl Alcohol/chemistry , Spectrometry, Fluorescence , Luminescent Measurements , 2-Aminopurine/chemistry , Molecular StructureABSTRACT
Self-protective carbonized polymer dots (CPDs) with advantageous crosslinked nano-structures have attracted considerable attention in metal-free room temperature phosphorescence (RTP) materials, whereas, their RTP emissions are still limited to short wavelength. Expanding their RTP emission to Near-Infrared (NIR) range is attractive but suffers from the difficulties in constructing narrow energy levels and inhibiting intense nonradiative decay. Herein, a crosslink-enhanced emission (CEE)-dominated construction strategy was proposed, achieving desired NIR RTP (710 nm) in self-protective CPDs for the first time. Structural factors, i.e.ï¼crosslinking (covalent-bond CEE), conjugation (conjugated amine with bridging N-H and C=C group), and steric hindrance (confined-domain CEE), were confirmed indispensable for triggering NIR RTP emission in CPDs. Contrast experiments and theoretical calculations further revealed the rationality of the design strategy originating from CEE in terms of promoting the narrow energy level emission of triplet excitons and inhibiting the nonradiative quenching. This work not only firstly achieves NIR RTP in self-protective CPDs, but also helps understand the NIR RTP origin to further guide the synthesis of diverse CPDs with efficient long-wavelength RTP emission.
ABSTRACT
The development of pure organic room-temperature phosphorescent (RTP) materials greatly facilitates the integrated application of luminescent materials. Herein, a type of photoactivated red RTP material was constructed by simply doping 4-(benzo[c][1,2,5]thiadiazol-5-ylthio)benzonitrile (p-NNS) into a poly(methyl methacrylate) (PMMA) matrix. The obtained film realized a controllable photoactivation process by regulation of diverse solvent levels, demonstrating potential advantages in optical anti-counterfeiting applications. Furthermore, luminescent properties of the doped film were utilized to detect oxygen content from 2.00% to 4.90%, which revealed the exact consumption of ambient oxygen under UV light. Every CIE point of the luminescence corresponds to a certain oxygen content, illustrating the visualization of oxygen content. The remarkable regulation of solvent effect and oxygen content in this work will provide competitive material for further optical applications.
ABSTRACT
Carbon dots (CDs) based room temperature phosphorescence (RTP) materials can be prepared via facile procedures and exhibit excellent photostability and biocompatibility. Furthermore, doping of hetero-atoms into CDs can afford multiple triplet levels. The RTP emission generated from the resultant CDs always displays outstanding dynamic behaviors and even can be efficiently excited by visible light. Given this, CDs-based RTP materials not only can be used for anti-counterfeiting but also exhibit great application potential in signage and illumination fields. In this contribution, a type of B, N, and P co-doped CDs are prepared in hectogram scale. Upon excitation by UV lamp and white LED, the obtained CDs emit green and yellow RTP, respectively, the lifetime of which are 851 and 481 ms, respectively. It is found that the luminescence color of the CDs can be further tuned. By controlling the degree of carbonization, the RTP color of the CDs can be facilely tuned from green to orange-red. Based on an energy transfer strategy, the luminescence color can be further tuned to red. Benefited from the dynamic and visible-excited colorful RTP emission, the application of these obtained CDs in anti-counterfeiting, fingerprint collection, and luminescent traffic signage are also explored.
ABSTRACT
Stimuli-responsive materials exhibiting exceptional room temperature phosphorescence (RTP) hold promise for emerging technologies. However, constructing such systems in a sustainable, scalable, and processable manner remains challenging. This work reports a bio-inspired strategy to develop RTP nanofiber materials using bacterial cellulose (BC) via bio-fermentation. The green fabrication process, high biocompatibility, non-toxicity, and abundant hydroxyl groups make BC an ideal biopolymer for constructing durable and stimuli-responsive RTP materials. Remarkable RTP performance is observed with long lifetimes of up to 1636.79 ms at room temperature. Moreover, moisture can repeatedly quench and activate phosphorescence in a dynamic and tunable fashion by disrupting cellulose rigidity and permeability. With capabilities for repeatable moisture-sensitive phosphorescence, these materials are highly suitable for applications such as anti-counterfeiting and information encryption. This pioneering bio-derived approach provides a reliable and sustainable blueprint for constructing dynamic, scalable, and processable RTP materials beyond synthetic polymers.
ABSTRACT
Sulfur dots are a new class of recently developed nonmetallic luminescent nanomaterials with various potential applications. Herein, we synthesized sulfur dots using a mild chemical etching method and then modified the structural features of the as-synthesized sulfur dots using a slow and defined solvent-assisted aggregation process. This increases the particle size and overall crystallinity along with the modifications of the surface functional groups, which eventually show a new emission band at longer wavelengths. Detailed photophysical and temperature-dependent luminescence studies confirmed that the new emissive state evolves due to interparticle interactions in the excited state. Furthermore, the occurrence of a new emissive state in a longer-wavelength region helped reduce the energy gap between the lowest excited singlet state and the lowest excited triplet state in modified sulfur dots, resulting in an aqueous stable room-temperature phosphorescence/afterglow emission through efficient intersystem crossing. This typical efficacious afterglow emission directly shows the potential applicability of structurally modified sulfur dots in encryption devices and can also be potentially effective in light emitting diodes (LED) and sensing devices.
ABSTRACT
Organic small molecules that exhibit second-scale phosphorescence at room temperature are of interest for potential applications in sensing, anticounterfeiting, and bioimaging. However, such materials systems are uncommon-requiring millisecond to second-scale triplet lifetimes, efficient intersystem crossing, and slow rates of nonradiative recombination. Here, a simple and scalable approach is demonstrated to activate long-lived phosphorescence in a wide variety of molecules by suspending them in rigid polymer hosts and annealing them above the polymer's glass transition temperature. This process produces submicron aggregates of the chromophore, which suppresses intramolecular motion that leads to nonradiative recombination and minimizes triplet-triplet annihilation that quenches phosphorescence in larger aggregates. In some cases, evidence of excimer-mediated intersystem crossing that enhances triplet generation in aggregated chromophores is found. In short, this approach circumvents the current design rules for long-lived phosphors, which will streamline their discovery and development.
ABSTRACT
Room temperature phosphorescence from organic materials has attracted an increasing attention in the recent years due to their potential application in various advancing technologies, notably in bioimaging and displays. In this context, heavy atoms such as halogen ones revealed useful tools to enhance the spin-orbit coupling (SOC) of molecular organic phosphors. However, the effect of halogen at the supramolecular level remains less understood, especially in the field of molecular crystals where additional factors can impact the phosphorescence emission. Here, we investigate external effect of halogens on the phosphorescence of chiral phthalimides molecular crystals. The results show that changing the nature of the halogen atom onto the phthalimide core leads to an evolution of the photophysical properties of the materials which does not necessarily follow the classical trend imposed by the expected internal heavy atom effect. Beyond this aspect, we showed that the halogen atom has a profound impact on the packing between the chromophores at the supramolecular level which is of paramount importance towards the optical properties (PLQY and lifetimes) of the different phosphors examined.
ABSTRACT
Organic ultralong room temperature phosphorescence (OURTP) materials capable of combining various emission behaviors for diversified optoelectronic properties and applications have recently gained a vigorous development, but it remains a forbidden challenge in designing OURTP molecules with hybrid local and charge-transfer (HLCT) feature, possibly due to the elevated difficulties in simultaneously meeting the stringent requirements of both HLCT and OURTP emitters. Here, through introducing multiple heteroatoms into one-dimensional fused ring of coumarin with moderate charge transfer perturbation in donor-π-acceptor architecture, we demonstrate a HLCT-featured OURTP molecule showing both promoted fluorescence with a quantum yield of 77% in solution and long-lived OURTP with a lifetime of 251 ms in conventional host material used in electroluminescent device. Thus, efficient OURTP organic light-emitting diodes (OLEDs) were fabricated, exhibiting bright electroluminescence with an exciton utilization efficiency of 85% and yellow OURTP lasting over 2 s for afterglow. Impressively, the HLCT OURTP-OLEDs can be further optimized to reach an unprecedented total external quantum efficiency (EQE) of ~12% and OURTP EQE up to 3.11%, representing the highest performance among the reported OURTP-OLEDs. These impressive results highlight the significance to fuse HLCT and OURTP together in enriching OURTP materials and improving the afterglow OLED performances.
ABSTRACT
The synthesis, crystal structure and room-temperature phosphorescence (RTP) of a 2D metal-free inorganic covalent framework ((H2en) [B5O8(OH)], named as CityU-12, and en represents for ethylenediamine) are reported. The precise structure information of CityU-12 has been disclosed through both single-crystal X-ray diffraction (SCXRD) analysis and low-dose high-resolution transmission electron microscopy (LD-HRTEM) study. The SCXRD results show that CityU-12 composes of 2D anionic BâO-based covalent inorganic frameworks with protonated ethylenediamine locating in the pore sites of 2D BâO layers while LD-HRTEM suggests that CityU-12 has an interplanar distance of 0.60 nm for (00 2 ¯ $\bar{2}$ ) crystal plane and 0.60 nm for (10 1 ¯ $\bar{1}$ ) crystal plane. The optical studies show that CityU-12 is an excellent nonconventional RTP material with the emission peak at 530 nm and a lifetime of 1.5 s. The quantum yield is 84.6% and the afterglow time is as long as 2.5 s. This work demonstrates that metal-free BâO frameworks can be promising nonconventional phosphors for RTP.
ABSTRACT
Stimulus-responsive organic room temperature phosphorescence (RTP) materials exhibit variations in their luminescent characteristics (lifetime and efficiency) upon exposure to external stimuli, including force, heat, light and acid-base conditions, the development of stimulus-responsive RTP molecules becomes imperative. However, the inner responsive mechanism is unclear, theoretical investigations to reveal the relationship among hydrostatic pressures, molecular structures and photophysical properties are highly desired. Herein, taking the Se-containing RTP molecule (SeAN) as a model, based on the dispersion corrected density functional theory (DFT-D), the combined quantum mechanics and molecular dynamics (QM/MM) method and thermal vibration correlation function (TVCF) theory, the influences of hydrostatic pressure on molecular structures, transition properties as well as lifetimes and efficiencies of RTP molecule are theoretically studied. Results show that extended lifetime and enhanced efficiency are observed at 2 Gpa compared with molecule at normal pressure, and this is related with the small reorganization energy and large oscillator strength. Moreover, due to the small energy gap (0.34 eV) and remarkable spin-orbit coupling (SOC) constant (8.56 cm-1) between first singlet excited state and triplet state, fast intersystem crossing (ISC) process is determined for molecule at 6 Gpa. Furthermore, the intermolecular interactions are visualized using independent gradient model based on Hirshfeld partition (IGMH) and the changes of molecular packing modes, SOC values, lifetimes and efficiencies with pressures are detected. These results reveal the relationship between molecular structures and RTP properties. Our work provides theoretical insights into the hydrostatic pressure response mechanism and could promote the development new efficient stimulus-responsive molecules.
ABSTRACT
Room temperature phosphorescence (RTP) materials with wood as framework are highly desirable due to their extended afterglow, high haze and good mechanical properties, which is highly desired in lighting materials. However, it remains challenging to obtain wood-based RTP materials that possess on-demand afterglow colors while maintaining high transparency across the entire visible spectrum. In this study, long-persistent phosphorescent transparent composite with tunable afterglow color is fabricated by infiltrating delignified wood with phosphors (including carbazole, naphthalene, and pyrene) doped polymethyl methacrylate (PMMA). Such RTP woods indicate remarkable transparency, over 70 %, and an extended afterglow duration of up to 8 s. Here, PMMA serves as rigid surrounding to suppress the non-radiative transition of phosphors to ensure phosphorescence, and to fulfill in the wood lumen to match the refractive index of cellulose for transparency. By formulating phosphors with different types and concentration ratios, transparent woods with diverse phosphorescence colors, and white emission, are successfully achieved. Furthermore, the RTP woods demonstrate dynamically tunable afterglow colors over time based on the varied phosphorescent lifetimes. Characterized by their high transparency and tunable colors, these natural wood-based RTP materials have great potentials for application in the fields of LED materials, optics, and building materials.
ABSTRACT
Developing materials with dynamic room-temperature phosphorescence (RTP) properties is crucial for expanding the applications of organic light-emitting materials. In this study, we designed and synthesized two novel RTP molecules by combining functional units, incorporating the folded unit thianthrene into the classic luminescent cores thioxanthone or anthraquinone to construct TASO and TA2O. In this combination, the TA unit contributes to the enhancement of spin-orbit coupling (SOC), while the luminescent core governs the triplet energy level. After the strategic manipulation of SOC using the thianthrene unit, the target molecules exhibited a remarkable enhancement in RTP performance. This strategy led to the successful development of TASO and TA2O molecules with outstanding dynamic RTP properties when exposed to continuous ultraviolet irradiation, a result that can be ascribed to their efficient RTP, improved absorption ability, and oxygen-sensitive RTP properties. Leveraging the oxygen-mediated ultraviolet-radiation-induced RTP enhancement in TASO-doped polymer films, we developed a novel time-resolved detection technique for identifying phase separation in polymers with varying oxygen permeability. This research offers a promising approach for constructing materials with dynamic RTP properties.
ABSTRACT
Polymeric room-temperature phosphorescence (RTP) materials especially multicolor RTP systems hold great promise in concrete applications. A key feature in these applications is a triplet charge transfer transition. Aromatic electron donors and electron acceptors are often essential to ensure persistent RTP. There is much interest in fabricating non-aromatic charge-transfer-mediated RTP materials and it still remains a formidable challenge to achieve color-tunable RTP via charge transfer. Herein, a charge-transfer-mediated RTP material by embedding quinoline derivatives within a non-aromatic polymer matrix such as polyacrylamide (PAM) or polyvinyl alcohol (PVA) is developed. Through-space charge transfer (TSCT) is achieved upon alkali- or heat treatment to realize a long phosphorescence lifetime of up to 629.90 ms, high phosphorescence quantum yield of up to 20.51%, and a green-to-blue afterglow for more than 20 s at room temperature. This color-tunable RTP emerges from a nonaromatic polymer to single phosphor charge transfer that has rarely been reported before. This finding suggests that an effective and simple approach can deliver new color-tunable RTP materials for applications including multicolor display, information encryption, and gas detection.
ABSTRACT
The application of supramolecular assembly (SA) with room temperature phosphorescence (RTP) in aqueous phase has the potential to revolutionize numerous fields. However, using simple molecules with crystalline RTP to construct SA with aqueous phase RTP is hardly possible from the standpoint of forces. The reason lies in that the transition from crystal to SA involves a structure transformation from highly stable to more dynamic state, leading to increased non-radiative deactivation pathways and silent RTP signal. Here, with the benefit of the confinement from the layered double hydroxide (LDH), various simple molecules (benzene derivatives) can successfully form metastable SA with aqueous phase RTP. The maximum of RTP lifetime and efficiency can reach 654.87â ms and 5.02 %, respectively. Mechanistic studies reveal the LDH energy trap can strengthen the intermolecular interaction, providing the prerequisite for the existence of metastable SA and appearance of aqueous phase RTP. The universality of this strategy will usher exploration into other multifunctional monomer, facilitating the development of SAs with aqueous phase RTP.
ABSTRACT
Circularly polarized room-temperature phosphorescence (CPRTP) simultaneously featuring multiple colors and extremely high dissymmetry factor (glum) is crucial for increasing the complexity of optical characteristics and advancing further development, but such a type of CPRTP is still unprecedented. The present work develops an effective and universal strategy to achieve full-color CPRTP with ultra-high glum factors in a polymeric cholesteric superhelix network, which is constructed by cholesteric liquid crystal polymer and chiral helical polymer (CHP). Taking advantage of the high helical twisting power of CHP, the resulting polymeric cholesteric superhelix network exhibits remarkable optical activity. Significantly, by adopting a simple double-layered architectures consisting of the cholesteric superhelix film and phosphorescent films, blue-, green-, yellow-, and red-CPRTP emissions are successfully obtained, with maximum |glum| values up to 1.43, 1.39, 1.09 and 0.84, respectively. Further, a multilevel information encryption application is demonstrated based on the multidimensional optical characteristics of the full-color double-layered CPRTP architectures. This study offers new insights into fabricating polymeric cholesteric superhelix with considerable CPRTP performance in advanced photonic applications.