Zygotic-splitting after in vitro fertilization and prenatal parenthood testing after suspected embryo mix-up - a case report.

After in vitro fertilization with a single embryo, the parents learned about being pregnant with twins in the 10th week with various indications that an embryonic mix-up could have taken place. The affected couple thus expressed the urgent desire for a clarification of parenthood considering an abortion. However, the prenatal test results would not have been available until the 14/15th week of pregnancy. Legally, then, severe physical or mental distress of the pregnant woman must be claimed by physicians to justify an abortion after the twelfth week. However, a lack of genetic relatedness could lead to serious psychological distress for the parents, making a pregnancy termination possible even after the twelfth week, which is discussed in this case study alongside the interdisciplinary team's ethical, legal, and medical considerations.For the invasive relationship testing, cultivated chorionic villi samples (CVS) from both unborn and saliva samples from the putative parents were genetically analyzed using classical short tandem repeats (STR) analysis. The perfect match of both CVS profiles suggested the occurrence of an unusual late twin shaft, for which, fortunately, parenthood could be confirmed. To our knowledge, this is the first report on a prenatal investigation of a suspected embryo mix-up after assisted reproductive technology (ART), in which parenthood should be fixed. We want to draw attention to this unthinkable scenario, which may increase in the future with ART-induced rising multiple pregnancies.

Exploration of identifying individual tumor tissue based on probabilistic model.

Variations in the tumor genome can result in allelic changes compared to the reference profile of its homogenous body source on genetic markers. This brings a challenge to source identification of tumor samples, such as clinically collected pathological paraffin-embedded tissue and sections. In this study, a probabilistic model was developed for calculating likelihood ratio (LR) to tackle this issue, which utilizes short tandem repeat (STR) genotyping data. The core of the model is to consider tumor tissue as a mixture of normal and tumor cells and introduce the incidence of STR variants (φ) and the percentage of normal cells (Mxn) as a priori parameters when performing calculations. The relationship between LR values and φ or Mxn was also investigated. Analysis of tumor samples and reference blood samples from 17 colorectal cancer patients showed that all samples had Log 10(LR) values greater than 1014. In the non-contributor test, 99.9% of the quartiles had Log 10(LR) values less than 0. When the defense's hypothesis took into account the possibility that the tumor samples came from the patient's relatives, LR greater than 0 was still obtained. Furthermore, this study revealed that LR values increased with decreasing φ and increasing Mxn. Finally, LR interval value was provided for each tumor sample by considering the confidence interval of Mxn. The probabilistic model proposed in this paper could deal with the possibility of tumor allele variability and offers an evaluation of the strength of evidence for determining tumor origin in clinical practice and forensic identification.

Construction and evaluation of a novel set of 90 microhaplotypes for forensic applications using NGS technology.

Microhaplotypes (MHs), small sets of linked single nucleotide polymorphisms (SNPs), are becoming a valuable tool for paternity testing, personal identification and other different forensic purposes due to their advantages of both short tandem repeats (STRs) and SNPs. However, only a small part of MHs with small segments have been developed and reported so far. And the current population genetic data of MHs are still insufficient. MHs with small segments possess unique advantages in mixture deconvolution, degradation material identification, noninvasive prenatal paternity testing and even medical tumor diagnostic applications. In the present study, a set of 90 autosomal MHs whose PCR amplicon lengths are from 90-150 bp, of which 58 MHs are less than or equal to 100 bp are selected, and assembled into an amplification multiplex system optimized for Ion S5™ System for forensic application. Genetic diversity study of 90 MHs in the populations from different intercontinental regions shows that the polymorphism information content (PIC) values of 83 MHs are greater than 0.4 in populations from East Asia (EAS), and the average PIC value of 90 MHs is greater than 0.5. A total of EAS populations shows the highest cumulative match probability (CMP) and cumulative probability of exclusion (CPE) values in five intercontinental populations. The CMP and CPE values of 90 MHs in EAS are 1.1688 × 10-54 and 0.999999999998954. The informativeness for assignment (In) values of the 90 MHs are calculated based on data from five intercontinental populations, and the In values of 20 MHs have greater than 0.1, indicating that the 20 MHs are high effectiveness in distinguishing different intercontinental populations, which can be used as candidate ancestry informative markers. Further, we have studied the polymorphisms of the 90 MHs based on 224 unrelated individuals of Henan Han population, China, and obtained the frequency data of the 90 MHs. In the Henan Han population, the effective number of alleles (Ae) of the 90 MHs ranges from 1.7649 (MH45) to 3.9792 (MH50), and the Ae values of 10 MHs reach to 3.0; the Ae values of 80 MHs are greater than 2, and the average Ae value for these MHs is 2.422. The average expected heterozygosity, observed heterozygosity, PIC, matching probability, discrimination power and probability of exclusion values of 90 MHs in the Henan Han population are 0.5788, 0.5851, 0.5039, 0.2608, 0.7392 and 0.2806, respectively. The CMP value of 90 MHs in the study population is less than 10-54, and their CPE value reaches 0.999999999999999923. Moreover, the results of the depth of coverage, allele coverage ratio and noise level indicate that the 90 MH amplification system has well sequencing performance, and the sequencing results are reliable. The results indicate the 90 MHs show higher polymorphisms in the study population. The present panel can be well used in paternity testing and individual identification in the study population and even the populations from EAS.

Donor/recipient origin of lung cancer after lung transplantation by DNA short tandem repeat analysis.

Background: Lung cancer is more common in posttransplant recipients than in the general population. The objective of this study was to examine the chimerism donor/recipient cell origin of graft cancer in recipients of lung transplant. Methods: A retrospective chart review was conducted at Foch Hospital for all lung transplantations from 1989 to 2020. Short tandem repeat PCR (STR-PCR) analysis, the gold standard technique for chimerism quantification, was used to determine the donor/recipient cell origin of lung cancers in transplant patients. Results: Fourteen (1.4%) of the 1,026 patients were found to have graft lung cancer after lung transplantation, and one developed two different lung tumors in the same lobe. Among the 15 lung tumors, 10 (67%) presented with adenocarcinoma, four (27%) with squamous cell carcinoma and one with small cell lung cancer. STR analysis showed that the origin of the cancer was the donor in 10 patients (71%), the recipient in three patients (21%), and was undetermined in one patient. Median time to diagnosis was 62 months. Conclusion: The prevalence of lung cancer in lung transplant recipients is very low. However, the results of our study showed heterogeneity of genetic alterations, with 21% being of recipient origin. Our results highlight the importance of donor selection and medical supervision after lung transplantation.

Extraction of DNA from trace forensic samples with a modified lysis buffer and chitosan coated magnetic beads.

The trace amounts of human tissue cells or body fluids left at the crime scene are often mixed with inhibitors such as rust, pigments, and humic acid. The extraction of the DNA from the trace cells is crucial for the investigation of cases. Usually, specially designed magnetic nanoparticles were chosen by the case investigators to enrich and elute DNA, which was then used for polymerase chain reaction (PCR) and short tandem repeat (STR) analysis. The traditional approach often had the following problems, such as low DNA enrichment efficiency, possible DNA breakage, and complex operations. Here, the 1%(w/v) of chitosan (75% deacetylation degree) was used to modify the 50 nm magnetic nanoparticles to gain the Chitosan@Beads, which theoretically carried positively charged in the pH = 5 of lysis buffer so as to adsorb negatively charged DNA through electrostatic interactions. The XPS and FT-IR results demonstrated that chitosan was successfully attached to the surface of magnetic nanoparticles. A set of simulated samples, containing 20 mg/µL of humic acid, pigments, iron ions (Fe2+, Fe3+), and the coexistence of the above three substances, were prepared to simulate the case scene. Human bronchial epithelial cells were mixed with the 200 µL of the above simulated samples for DNA extraction. 400 µL of lysis buffer, 20 µL of proteinase K (10 mg/mL) and 20 µL of Chitosan@Beads solution (20 mg/mL) was used for cell disruption and DNA enrichment. The extraction sensitivity of Chitosan@Beads was confirmed to be 10 cells, superior to commercial reagent kits. The Chitosan@Beads@DNA can directly use for "In-situ PCR" with elution-free operations. The STR loci rate of DNA extracted by Chitosan@Beads was around 97.9%, higher than the commercial kit (66.7%). In short, we foresee here developed novel Chitosan@Beads and modified lysis buffer could provide a new model for the DNA extraction of forensic trace evidence.

DNA Amplification Using Promega's PowerPlex® Fusion Systems (5C and 6C).

Multiplex amplification and typing of short tandem repeat (STR) loci enable the rapid characterization of forensic samples for human identification purposes with the potential for high discriminatory power. Many commercial multiplex kits are available for consideration and purchase by DNA testing laboratories, including the PowerPlex® Fusion 5C and PowerPlex® Fusion 6C Systems offered by Promega Corporation. Herein we describe full-volume and half-volume amplification protocols utilizing extracted DNA for these respective multiplex kits, as well as procedures for direct amplification of lytic and nonlytic storage card punches and swabs.

Amplification of Extracted DNA and Direct Amplification with the PowerPlex® Y23 System.

The PowerPlex® Y23 System offered by Promega Corporation contains 23 Y-STR loci (DYS19, DYS385a/b, DYS389I/II, DYS390, DYS391, DYS392, DYS393, DYS437, DYS438, DYS439, DYS448, DYS456, DYS458, DYS481, DYS533, DYS549, DYS570, DYS576, DYS635, DYS643, and Y-GATA-H4). The PowerPlex® Y23 System is designed to amplify DNA from purified extracts as well as direct amplification from substrates used to collect database samples (e.g., swabs and storage cards). Protocols are provided for full-volume reactions for DNA extracts, as well as half-volume reactions for direct amplifications from different substrates.

QIAGEN's Investigator® 24plex QS and GO! PCR Amplification.

The Investigator® 24Plex kits are multiplex PCR kits utilized by forensic laboratories to simultaneously amplify 22 of the most commonly utilized STR markers for human identity testing, including the 20 core CODIS loci, along with the sex marker Amelogenin and 2 novel quality sensors. These quality sensors are unique internal PCR controls that provide useful insight to the analyst regarding possible inhibition or degradation within the sample. This chapter describes the use of the QS version of the kit designed for use with extracted DNA from casework samples, as well as the use of the GO! version of the kit designed for direct amplification of reference samples.

Use of a commercially available hydrogel as a novel DNA surface sampling tool.

A common requirement in the military, law enforcement, and forensic mission space is the need to collect trace samples from surfaces using a method that not only readily captures the sample but also retains its integrity for downstream identification and characterization. Additionally, collecting samples from three-dimensional objects (e.g., shell casings) is a challenge for which there is currently no validated standardized approach. Recently, hydrogels have been shown to have the potential for surface collection of trace bacterial spores, amino acids, and DNA. To test whether these hydrogels can serve as a viable collection medium for sampling DNA from surfaces, we carried out a series of preliminary tests examining collection efficiency and suitability of hydrogel material to recover samples of diluted, dried human DNA on a smooth polycarbonate surface. The recovery of surface DNA using a commercially available hydrogel was examined, and the efficiency compared to samples collected using a standard foam collection swab. DNA collected using the hydrogel and swab methods was then examined using quantitative polymerase chain reaction (qPCR) and short tandem repeat (STR) analysis to determine whether the collection material was compatible with these downstream processes. The hydrogel material used for this study collected the experimental DNA with comparable efficiency to standard collection swabs. In addition, qPCR and STR analyses demonstrated compatibility with the hydrogel collection and extraction process. These data suggest that hydrogels have the potential to be used as sample collection materials and deserve further characterization to elucidate their utility in collection from irregularly shaped, three-dimensional surfaces/materials.

High-resolution genotyping of 58 STRs in 635 Northern Han Chinese with MiSeq FGx ® Forensic Genomics System.

Sequence polymorphisms were characterized at 27 autosomal STRs (A-STRs), 7 X chromosomal STRs (X-STRs), and 24 Y chromosomal STRs (Y-STRs) in 635 Northern Han Chinese with the ForenSeq DNA Signature Prep Kit on the MiSeq FGx Forensic Genomics System. Since repeat region (RR) and flanking region (FR) variation can be detected by massively parallel sequencing (MPS), the increase in the number of unique alleles and the average of gene diversity was 78.18% and 3.51% between sequence and length, respectively. A total of 74 novel RR variants were identified at 33 STRs compared with STRSeq and previous studies, and 13 FR variants (rs1770275883, rs2053373277, rs2082557941, rs1925525766, rs1926380862, rs1569322793, rs2051848492, rs2051848696, rs2016239814, rs2053269960, rs2044518192, rs2044536444, and rs2089968964) were first submitted to dbSNP. Also, 99.94% of alleles were concordant between the ForenSeq DNA Signature Prep Kit and commercial CE kits. Discordance resulted from the low performance at D22S1045 and occasionally at DYS392, flanking region deletions at D7S820 and DXS10074, and the strict alignment algorithm at DXS7132. Null alleles at DYS505 and DYS448 and multialleles at DYS387S1a/b, DYS385a/b, DYS448, DYS505, DXS7132, and HPRTB were validated with other MPS and CE kits. Thus, a high-resolution sequence-based (SB) and length-based (LB) allele frequencies dataset from Northern Han Chinese has been established already. As expected, forensic parameters increased significantly on combined power of discrimination (PD) and combined power of exclusion (PE) at A-STRs, mildly on combined PD and combined mean exclusion chance (MEC) at X-STRs, and barely on discrimination capacity (DC) at Y-STRs. Additionally, MiSeq FGx quality metrics and MPS performance were evaluated in this study, which presented the high-quality of the dataset at 20 consecutive runs, such as ≥ 60% bases with a quality score of 20 or higher (%≥ Q20), > 60% of effective reads, > 2000 × of depth of coverage (DoC), ≥ 60% of allele coverage ratio (ACR) or heterozygote balance, ≥ 70% of inter-locus balance, and ≤ 0.4 of the absolute value of observed minus expected heterozygosity (|Hexp - Hobs|). In conclusion, MiSeq FGx can help us generate a high-resolution and high-quality dataset for human identification and population genetic studies.

Comparative of Forensic DNA Identification Using Cell Lysis Method and Magnetic Beads Method.

OBJECTIVES: To compare the effects of cell lysis method and magnetic beads method in forensic DNA identification and to explore these two methods in forensic DNA identification. METHODS: The genome DNA of THP-1 cells in different quantities was extracted by the cell lysis method and magnetic beads method, and the DNA content was quantified by real-time quantitative PCR. The cell lysis method and magnetic beads method were used to type the STR of human blood with different dilution ratios. RESULTS: When the numbers of THP-1 cell were 100, 400 and 800, the DNA content extracted by cell lysis method were (1.219±0.334), (5.081±0.335), (9.332±0.318) ng, respectively; and the DNA content extracted by magnetic beads method were (1.020±0.281), (3.634±0.482), (7.896±0.759) ng, respectively. When the numbers of THP-1 cells were 400 and 800, the DNA content extracted by the cell lysis method was higher than that by the magnetic beads method. The sensitivity of cell lysis method and magnetic beads method was similar in STR typing of human blood at different dilution ratios. Complete STR typing could be obtained at 100, 300 and 500-fold dilutions of blood samples, but could not be detected at 700-fold dilution. STR typing of undiluted human blood could not be detected by cell lysis method. CONCLUSIONS: The cell lysis method is easy to operate and can retain template DNA to the maximum extend. It is expected to be suitable for trace blood evidence tests.

Efficiency evaluation of common forensic genetic markers for parentage identification involving close relatives.

To explore the efficacy of commonly used forensic identification panels in complex paternity testing of trios that involved close relatives, we wrote a code by R to generate 10,000 pedigrees at 20 CODIS STR, 21 non-CODIS STR and 30 InDel loci in Chinese five ethnic groups based on their allele frequencies. Parentage identification index--cumulative paternity index (CPI) value was set as output and was further analyzed to evaluate the performance of the aforementioned panels in complex paternity testing when the alleged parent is a random individual, biological parent, grandparent, sibling of biological parent, half-sibling of biological parent, etc. The results showed that the false inclusion of parent sibling posed as parent demonstrated no statistically significant difference from that of grandparent posed as parent. The scenarios where both biological parent and alleged parent were consanguineous to the other parent were also simulated. The results revealed that the complexity of paternity testing would raise when biological parents were consanguineous and the alleged parent was a close relative of theirs. Despite the values of non-conformity number could vary in different genetic relationships, populations and panels, 20 CODIS STRs and 21 non-CODIS STRs performed satisfactorily in most simulated scenarios. However, the joint use of 20 CODIS STRs and 21 non-CODIS STRs is more recommendable when resolving the paternity testing of the incest mating case. Overall, the current study could be regarded as a worthwhile reference in complex paternity testing of trios that involved close relatives.

Developmental validation of the ForenSeq MainstAY kit, MiSeq FGx sequencing system and ForenSeq Universal Analysis Software.

For human identification purposes, forensic genetics has primarily relied upon a core set of autosomal (and to a lesser extent Y chromosome) short tandem repeat (STR) markers that are enriched by amplification using the polymerase chain reaction (PCR) that are subsequently separated and detected using capillary electrophoresis (CE). While STR typing conducted in this manner is well-developed and robust, advances in molecular biology that have occurred over the last 15 years, in particular massively parallel sequencing (MPS) [1-7], offer certain advantages as compared to CE-based typing. First and foremost is the high throughput capacity of MPS. Current bench top high throughput sequencers enable larger batteries of markers to be multiplexed and multiple samples to be sequenced simultaneously (e.g., millions to billions of nucleotides can be sequenced in one run). Second, compared to the length-based CE approach, sequencing STRs increases discrimination power, enhances sensitivity of detection, reduces noise due to instrumentation, and improves mixture interpretation [4,8-23]. Third, since detection of STRs is based on sequence and not fluorescence, amplicons can be designed that are shorter in length and of similar lengths among loci, where possible, which can improve amplification efficiency and analysis of degraded samples. Lastly, MPS offers a single format approach that can be applied to analysis of a wide variety of genetic markers of forensic interest (e.g., STRs, mitochondrial DNA, single nucleotide polymorphisms, insertion/deletions). These features make MPS a desirable technology for casework [14,15,24,25-48]. The developmental validation of the ForenSeq MainstAY library preparation kit with the MiSeq FGx Sequencing System and ForenSeq Universal Software is reported here to assist with validation of this MPS system for casework [49]. The results show that the system is sensitive, accurate and precise, specific, and performs well with mixtures and mock case-type samples.

Comparative of Forensic DNA Identification Using Cell Lysis Method and Magnetic Beads Method / 法医学杂志

OBJECTIVES@#To compare the effects of cell lysis method and magnetic beads method in forensic DNA identification and to explore these two methods in forensic DNA identification.@*METHODS@#The genome DNA of THP-1 cells in different quantities was extracted by the cell lysis method and magnetic beads method, and the DNA content was quantified by real-time quantitative PCR. The cell lysis method and magnetic beads method were used to type the STR of human blood with different dilution ratios.@*RESULTS@#When the numbers of THP-1 cell were 100, 400 and 800, the DNA content extracted by cell lysis method were (1.219±0.334), (5.081±0.335), (9.332±0.318) ng, respectively; and the DNA content extracted by magnetic beads method were (1.020±0.281), (3.634±0.482), (7.896±0.759) ng, respectively. When the numbers of THP-1 cells were 400 and 800, the DNA content extracted by the cell lysis method was higher than that by the magnetic beads method. The sensitivity of cell lysis method and magnetic beads method was similar in STR typing of human blood at different dilution ratios. Complete STR typing could be obtained at 100, 300 and 500-fold dilutions of blood samples, but could not be detected at 700-fold dilution. STR typing of undiluted human blood could not be detected by cell lysis method.@*CONCLUSIONS@#The cell lysis method is easy to operate and can retain template DNA to the maximum extend. It is expected to be suitable for trace blood evidence tests.

Forensic Validation and Application Evaluation of IDentifier DNA Typing Kit (Yan-Huang34) / 法医学杂志

OBJECTIVES@#To investigate the technical performance of IDentifier DNA typing kit (YanHuang34) and evaluate its forensic application value.@*METHODS@#Following the Criterion of Forensic Science Human Fluorescence STR Multiplex Amplification Reagent (GB/T 37226-2018), IDentifier DNA typing kit (YanHuang34) was verified in 11 aspects of species specificity, veracity, sensibility, adaptability, inhibitor tolerance, consistency, balance, reaction condition verification, mixed samples, stability and inter batch consistency. The system efficiency of IDentifier DNA typing kit (YanHuang34) was compared with the PowerPlex® Fusion 6C System, VersaPlex® 27PY System and VeriFilerTM Plus PCR Amplification Kit. The IDentifier DNA typing kit (YanHuang34) was used to detect the swabs of biological samples in daily cases and the STR performances were observed.@*RESULTS@#IDentifier DNA typing kit (YanHuang34) had good species specificity, veracity, adaptability, inhibitor tolerance and balance. The sensibility was up to 0.062 5 ng. It was able to detect different types of samples, degraded samples and inhibitor mixed samples. Complete DNA typing could be obtained for samples with the mixture ratio less than 4∶1. The system efficiency of IDentifier DNA typing kit (YanHuang34) was very high, with TDP up to 1-1.08×10-37, CPEtrio and CPEduo up to 1-5.47×10-14 and 1-6.43×10-9, respectively. For the touched biological samples in actual cases, the effective detection rate was 21.05%. The system efficiency of kinship, single parent and full sibling identifications was effectively improved.@*CONCLUSIONS@#The IDentifier DNA typing kit (YanHuang34) is adaptive to the GB/T 37226-2018 requirements. It can be used for individual identification and paternity identification, and is suitable for application in the field of forensic science.

Forensic Validation and Application Evaluation of IDentifier DNA Typing Kit (Yan-Huang34).

OBJECTIVES: To investigate the technical performance of IDentifier DNA typing kit (YanHuang34) and evaluate its forensic application value. METHODS: Following the Criterion of Forensic Science Human Fluorescence STR Multiplex Amplification Reagent (GB/T 37226-2018), IDentifier DNA typing kit (YanHuang34) was verified in 11 aspects of species specificity, veracity, sensibility, adaptability, inhibitor tolerance, consistency, balance, reaction condition verification, mixed samples, stability and inter batch consistency. The system efficiency of IDentifier DNA typing kit (YanHuang34) was compared with the PowerPlex® Fusion 6C System, VersaPlex® 27PY System and VeriFilerTM Plus PCR Amplification Kit. The IDentifier DNA typing kit (YanHuang34) was used to detect the swabs of biological samples in daily cases and the STR performances were observed. RESULTS: IDentifier DNA typing kit (YanHuang34) had good species specificity, veracity, adaptability, inhibitor tolerance and balance. The sensibility was up to 0.062 5 ng. It was able to detect different types of samples, degraded samples and inhibitor mixed samples. Complete DNA typing could be obtained for samples with the mixture ratio less than 4∶1. The system efficiency of IDentifier DNA typing kit (YanHuang34) was very high, with TDP up to 1-1.08×10-37, CPEtrio and CPEduo up to 1-5.47×10-14 and 1-6.43×10-9, respectively. For the touched biological samples in actual cases, the effective detection rate was 21.05%. The system efficiency of kinship, single parent and full sibling identifications was effectively improved. CONCLUSIONS: The IDentifier DNA typing kit (YanHuang34) is adaptive to the GB/T 37226-2018 requirements. It can be used for individual identification and paternity identification, and is suitable for application in the field of forensic science.

Genetic diversity of 15 STR loci in Yunnan Va ethnic minority and the phylogenetic relationships with 26 other populations.

BACKGROUND: The Va (also called "Wa") people are an ethnic minority living mainly in the southwest of Yunnan Province. AIM: This study was conducted to obtain the genetic information and forensic statistical parameters of 15 autosomal short tandem repeat (STR) loci included in the AmpFlSTR®Identifiler™ kit (Applied Biosystems, Foster City, CA) in the Yunnan Va population, with a view to enriching the genetic databases of the Chinese Va population. SUBJECTS AND METHODS: A total of 508 unrelated Chinese Va individuals were genotyped with this 15 STR kit, the genetic polymorphisms and associated forensic parameters were calculated. The genetic relationships between Chinese Va and 26 other Chinese populations were also evaluated. RESULTS: All of the STR loci reached the Hardy-Weinberg equilibrium after Bonferroni correction. A total of 159 alleles were observed with allele frequencies ranging from 0.000984 to 0.606299. The combined discrimination power (CDP) and the cumulative probability of excluding (CPE) of the 15 STR loci were 0.999 999 999 999 999 988 126 and 0.999 995 734, respectively. Our results indicated that the geographically adjacent or ethnically close populations showed a higher genetic affinity. CONCLUSIONS: The results of this study will enrich the forensic databases of the Chinese Va population and could be applied in forensic analysis.

Genetic Polymorphism of 16 X-STR Loci in Xinjiang Uygur Population.

OBJECTIVES: To study the genetic polymorphism and population genetic parameters of 16 X-STR loci in Xinjiang Uygur population. METHODS: The Goldeneye® DNA identification system 17X was used to amplify 16 X-STR loci in 502 unrelated individuals (251 females and 251 males). The amplified products were detected by 3130xl genetic analyzer. Allele frequencies and population genetic parameters were analyzed statistically. The genetic distances between Uygur and other 8 populations were calculated. Multidimensional scaling and phylogenetic tree were constructed based on genetic distance. RESULTS: In the 16 X-STR loci, a total of 67 alleles were detected in 502 Xinjiang Uygur unrelated individuals. The allele frequencies ranged from 0.001 3 to 0.572 4. PIC ranged from 0.568 8 to 0.855 3. The cumulative discrimination power in females and males were 0.999 999 999 999 999 and 0.999 999 999 743 071, respectively. The cumulative mean paternity exclusion chance in trios and in duos were 0.999 999 997 791 859 and 0.999 998 989 000 730, respectively. The genetic distance between Uygur population and Kazakh population was closer, and the genetic distance between Uygur and Han population was farther. CONCLUSIONS: The 16 X-STR loci are highly polymorphic and suitable for identification in Uygur population, which can provide a powerful supplement for the study of individual identification, paternity identification and population genetics.

Ion Torrent ™ Genexus ™ Integrated Sequencer and ForeNGS Analysis Software-An automatic NGS-STR workflow from DNA to profile for forensic science.

The Ion Torrent ™ Genexus ™ Sequencer (Genexus) is a highly integrated instrument that can automate library construction, templating, and sequencing in a single-instrument run. By programing the ForeNGS Analysis Software (FNAS), we bridged the gap between sequencing and genotyping without manual intervention. FNAS can automatically transfer sequencing output files from Genexus, analyze the repeat and flanking regions aligned to the GRCh38 assembly, name the alleles according to the ISFG guidelines, and generate user-friendly interactive profiles. Genexus and FNAS can accomplish the fully automatic DNA-to-Profile workflow in forensics. Based on our experiences, the optimal assay parameters on Genexus were validated as follows: 24 cycles of target amplification for library construction; 40 µL of library and 400 bp of template size for templating; 852 flows of dNTPs by order of Ion samba HID2 for sequencing; and 750,000 reads per sample at minimum for 16 samples multiplexed on a lane. By developmental validations of the Precision ID Globalfiler ™ NGS STR Panel v2, Genexus presented competitive performance at the optimal assay parameters qualified to detect commonly used forensic STR markers. It could produce repeatable and reproducible results, and human profiles could be easily separated from nonhuman profiles. Additionally, Genexus was sensitive enough to detect samples with 100 pg of input DNA, and it was suitable for various types of case samples, especially for low copy number samples and degraded samples. Moreover, minor contributors could be detected between the 4:1 and 1:4 mixtures with an analysis threshold of 50 × . The Genexus workflow is a robust and labor-effective solution enabling forensic scientists to obtain NGS-STR profiles within a single day and with only the need to prepare DNA extracts, then set up Genexus, and finally interpret profiles on FNAS.