Lab-on-Device Synthesis of Hierarchical Macro/Mesoporous WO3 Semiconducting Films for High-Performance H2S Sensing.

The performance consistency of the gas sensor is strongly dependent on the interface binding between the sensitive materials and the electrodes. Traditional powder coating methods can inevitably lead to differences in terms of substrate-film interface interaction and device performance, affecting the stability and lifetime. Thus, efficient growth of sensitive materials on device substrates is crucial and essential to enhance the sensing performance, especially for stability. Herein, hierarchically ordered macro/mesoporous WO3 films are in situ synthesized on the electrode via a facile soft/hard dual-template strategy. Orderly arrayed uniform polystyrene (PS) microspheres with tailored size (ca. 1.2 µm) are used as a hard template, and surfactant Pluronic F127 as a soft template can co-assemble with tungsten precursor into ordered mesostructure in the interstitials of PS colloidal crystal induced by solvent evaporation. Benefiting from its rich porosity and high stability, the macro/mesoporous WO3-based sensor shows high sensitivity (Rair/Rgas = 307), fast response/recovery speed (5/9 s), and excellent selectivity (SH2S/Smax > 7) toward 50 ppm H2S gas (a biomarker for halitosis). Significantly, the sensors exhibit an extended service life with a negligible change in sensing performance within 60 days. This lab-on-device synthesis provides a platform method for constructing stable nanodevices with good consistency and high stability, which are highly desired for developing high-performance sensors.

Constructing High-Active Surface of Plasmonic Tungsten Oxide for Photocatalytic Alcohol Dehydration.

Plasmonic semiconductors with broad spectral response hold significant promise for sustainable solar energy utilization. However, the surface inertness limits the photocatalytic activity. Herein, a novel approach is proposed to improve the body crystallinity and increase the surface oxygen vacancies of plasmonic tungsten oxide by the combination of hydrochloric acid (HCl) regulation and light irradiation, which can promote the adsorption of tert-butyl alcohol (TBA) on plasmonic tungsten oxide and overcome the hindrance of the surface depletion layer in photocatalytic alcohol dehydration. Additionally, this process can concentrate electrons for strong plasmonic electron oscillation on the near surface, facilitating rapid electron transfer within the adsorbed TBA molecules for C-O bond cleavage. As a result, the activation barrier for TBA dehydration is significantly reduced by 93% to 6.0 kJ mol-1, much lower than that of thermocatalysis (91 kJ mol-1). Therefore, an optimal isobutylene generation rate of 1.8 mol g-1 h-1 (selectivity of 99.9%) is achieved. A small flow reaction system is further constructed, which shows an isobutylene generation rate of 12 mmol h-1 under natural sunlight irradiation. This work highlights the potential of plasmonic semiconductors for efficient photocatalytic alcohol dehydration, thereby promoting the sustainable utilization of solar energy.

Alkaloid Precipitant Reaction Inspired Controllable Synthesis of Mesoporous Tungsten Oxide Spheres for Biomarker Sensing.

Highly porous sensitive materials with well-defined structures and morphologies are extremely desirable for developing high-performance chemiresistive gas sensors. Herein, inspired by the classical alkaloid precipitant reaction, a robust and reliable active mesoporous nitrogen polymer sphere-directed synthesis method was demonstrated for the controllable construction of heteroatom-doped mesoporous tungsten oxide spheres. In the typical synthesis, P-doped mesoporous WO3 monodisperse spheres with radially oriented channels (P-mWO3-R) were obtained with a diameter of ∼180 nm, high specific surface area, and crystalline skeleton. The in situ-introduced P atoms could effectively adjust the coordination environment of W atoms (Wδ+-Ov), giving rise to dramatically enhanced active surface-adsorbed oxygen species and unusual metastable ε-WO3 crystallites. The P-mWO3-R spheres were applied for the sensing of 3-hydroxy-2-butanone (3H2B), a biomarker of foodborne pathogenic bacteria Listeria monocytogenes (LM). The sensor exhibited high sensitivity (Ra/Rg = 29 to 3 ppm), fast response dynamics (26/7 s), outstanding selectivity, and good long-term stability. Furthermore, the device was integrated into a wireless sensing module to realize remote real-time and precise detection of LM in practical applications, making it possible to evaluate food quality using gas sensors conveniently.

CVD Grown Tungsten Oxide for Low Temperature Hydrogen Sensing: Tuning Surface Characteristics via Materials Processing for Sensing Applications.

The intrinsic properties of semiconducting oxides having nanostructured morphology are highly appealing for gas sensing. In this study, the fabrication of nanostructured WO3 thin films with promising surface characteristics for hydrogen (H2 ) gas sensing applications is accomplished. This is enabled by developing a chemical vapor deposition (CVD) process employing a new and volatile tungsten precursor bis(diisopropylamido)-bis(tert-butylimido)-tungsten(VI), [W(Nt Bu)2 (Ni Pr2 )2 ]. The as-grown nanostructured WO3 layers are thoroughly analyzed. Particular attention is paid to stoichiometry, surface characteristics, and morphology, all of which strongly influence the gas-sensing potential of WO3 . Synchrotron-based ultraviolet photoelectron spectroscopy (UPS), X-ray photoelectron spectroscopy (XPS), X-ray photoelectron emission microscopy (XPEEM), low-energy electron microscopy (LEEM) and 4-point van der Pauw (vdP) technique made it possible to analyze the surface chemistry and structural uniformity with a spatially resolved insight into the chemical, electronic and electrical properties. The WO3 layer is employed as a hydrogen (H2 ) sensor within interdigitated mini-mobile sensor architecture capable of working using a standard computer's 5 V 1-wirebus connection. The sensor shows remarkable sensitivity toward H2 . The high, robust, and repeatable sensor response (S) is attributed to the homogenous distribution of the W5+ oxidation state and associated oxygen vacancies, as shown by synchrotron-based UPS, XPS, and XPEEM analysis.

Influence of crystal structure and oxygen vacancies on optical properties of nanostructured multi-stoichiometric tungsten suboxides.

Four distinct tungsten suboxide (WO3-x) nanomaterials were synthesized via chemical vapour transport reaction and the role of their crystal structures on the optical properties was studied. These materials grow either as thin, quasi-2D crystals with the WnO3n-1formula (in shape of platelets or nanotiles), or as nanowires (W5O14, W18O49). For the quasi-2D materials, the appearance of defect states gives rise to two indirect absorption edges. One is assigned to the regular bandgap occurring between the valence and the conduction band, while the second is a defect-induced band. While the bandgap values of platelets and nanotiles are in the upper range of the reported values for the suboxides, the nanowires' bandgaps are lower due to the higher number of free charge carriers. Both types of nanowires sustain localized surface plasmon resonances, as evidenced from the extinction measurements, whereas the quasi-2D materials exhibit excitonic transitions. All four materials have photoluminescence emission peaks in the UV region. The interplay of the crystal structure, oxygen vacancies and shape can result in changes in optical behaviour, and the understanding of these effects could enable intentional tuning of selected properties.

Atomistic Observation of Temperature-Dependent Defect Evolution within Sub-stoichiometric WO3-x Catalysts.

Tunable crystalline defects endow WO3-x catalysts with extended functionalities for a broad range of photo- and electric-related applications. However, direct visualization of the defect structures and their evolution mechanism is lacking. Herein, aberration-corrected and in situ transmission electron microscopy was complemented by theoretical calculations to investigate the effect of temperature on the defect evolution behavior during hydrogenation treatment. Low processing temperature (100-300 °C) leads to the occurrence of randomly distributed oxygen vacancies within WO3-x nanosheets. At higher temperatures, oxygen vacancies become highly mobile and aggregate into stacking faults. Planar defects are prone to nucleate at the surface and develop in a zigzag form at 400 °C, while treating at 500 °C promotes the growth of {200}-type stacking faults. Our work clearly establishes that the atomic configuration of the defects in WO3-x samples could be manipulated by regulating the hydrogenation temperature. This study not only expands our understanding of the structure-function relationships of sub-stoichiometric tungsten oxides but also unlocks their full potential as advanced catalysts by tuning stoichiometry in a controlled manner.

Synthesis and Characterization of Tungsten Suboxide WnO3n-1 Nanotiles.

WnO3n-1 nanotiles, with multiple stoichiometries within one nanotile, were synthesized via the chemical vapour transport method. They grow along the [010] crystallographic axis, with the thickness ranging from a few tens to a few hundreds of nm, with the lateral size up to several µm. Distinct surface corrugations, up to a few 10 nm deep appear during growth. The {102}r crystallographic shear planes indicate the WnO3n-1 stoichiometries. Within a single nanotile, six stoichiometries were detected, namely W16O47 (WO2.938), W15O44 (WO2.933), W14O41 (WO2.928), W13O38 (WO2.923), W12O35 (WO2.917), and W11O32 (WO2.909), with the last three never being reported before. The existence of oxygen vacancies within the crystallographic shear planes resulted in the observed non-zero density of states at the Fermi energy.

Molybdenum Oxide/Tungsten Oxide Nano-heterojunction with Improved Surface-Enhanced Raman Scattering Performance.

By virtue of their high uniformity and stability, metal oxide-based surface-enhanced Raman spectroscopy (SERS) substrates have attracted enormous attention for molecular trace detection. However, strategies for further enhancing the SERS sensitivity are still desired. Herein, MoOx/WOx nano-heterojunctions are constructed by mixing MoOx and WOx together (MoOx/WOx hybrid) with diverse weight ratios. Using a 532 nm laser as the excitation source and R6G as the Raman reporter, it is shown that the Raman signal intensity (for the peak @ 1360 cm-1) obtained on the optimal MoOx/WOx hybrid (MoOx/WOx = 1:1/3) is twice that observed on a pure MoOx or WOx substrate. Moreover, a limit of detection of 10-8 M and an enhancement factor of 108 are achieved. In the SERS enhancement mechanism investigation, it is revealed that MoOx and WOx form a staggered band structure. During the SERS measurement, electron-hole pairs are generated in the nano-heterojunction using the incident laser. They are then separated by the built-in potential with the electrons moving toward WOx. The accumulated electrons on WOx are further transferred to the R6G molecules through the coupling of orbitals. Consequently, the molecular polarizability is amplified, and SERS performance is enhanced. The abovementioned explanation is supported by the evidence that the contribution of the chemical enhancement mechanism in the optimal MoOx/WOx hybrid substrate is about 2.5 times or 5.9 times that in the pure WOx or MoOx substrate.

Spatially Ordered Matrix of Nanostructured Tin-Tungsten Oxides Nanocomposites Formed by Ionic Layer Deposition for Gas Sensing.

The process of layer-by-layer ionic deposition of tin-tungsten oxide films on smooth silicon substrates and nanoporous anodic alumina matrices has been studied. To achieve the film deposition, solutions containing cationic SnF2 or SnCl2 and anionic Na2WO4 or (NH4)2O·WO3 precursors have been used. The effect of the solution compositions on the films deposition rates, morphology, composition, and properties was investigated. Possible mechanisms of tin-tungsten oxide films deposition into the pores and on the surface of anodic alumina are discussed. The electro-physical and gas-sensitive properties of nanostructured SnxWyOz films have been investigated. The prepared nanocomposites exhibit stable semiconductor properties characterized by high resistance and low temperature coefficient of electrical resistance of about 1.6 × 10-3 K-1. The sensitivity of the SnxWyOz films to 2 and 10 ppm concentrations of ammonia at 523 K was 0.35 and 1.17, respectively. At concentrations of 1 and 2 ppm of nitrogen dioxide, the sensitivity was 0.48 and 1.4, respectively, at a temperature of 473 K. At the temperature of 573 K, the sensitivity of 1.3 was obtained for 100 ppm of ethanol. The prepared nanostructured tin-tungsten oxide films showed promising gas-sensitivity, which makes them a good candidate for the manufacturing of gas sensors with high sensitivity and low power consumption.

Plasmonic semiconductor photocatalyst: Non-stoichiometric tungsten oxide.

Semiconductor photocatalysis has attracted increasing attention due to its potential application in solving the problems related to energy crisis and environmental pollution. As a typical plasmonic semiconductor, non-stoichiometric tungsten oxide (WO3-X) has invoked significant interest for its unique property and excellent photocatalytic performance. In this review, we briefly introduce the fundamental properties of the WO3-x, and then summarize the synthesis methods such as solvothermal reaction, solid phase reduction and exfoliation treatment, together with the modification strategies such as doping and constructing homo-/hetero-junctions. Additionally, we emphasize the practical applications of WO3-x in hydrogen evolution, nitrogen fixation, carbon dioxide reduction, and pollutant degradation. Finally, comprehensive conclusions and perspectives on the fabrication of WO3-x photocatalyst leading to satisfactory performance are given as well.

Advances in Electrochemical Energy Devices Constructed with Tungsten Oxide-Based Nanomaterials.

Tungsten oxide-based materials have drawn huge attention for their versatile uses to construct various energy storage devices. Particularly, their electrochromic devices and optically-changing devices are intensively studied in terms of energy-saving. Furthermore, based on close connections in the forms of device structure and working mechanisms between these two main applications, bifunctional devices of tungsten oxide-based materials with energy storage and optical change came into our view, and when solar cells are integrated, multifunctional devices are accessible. In this article, we have reviewed the latest developments of tungsten oxide-based nanostructured materials in various kinds of applications, and our focus falls on their energy-related uses, especially supercapacitors, lithium ion batteries, electrochromic devices, and their bifunctional and multifunctional devices. Additionally, other applications such as photochromic devices, sensors, and photocatalysts of tungsten oxide-based materials have also been mentioned. We hope this article can shed light on the related applications of tungsten oxide-based materials and inspire new possibilities for further uses.

Hybrid Nanostructures Obtained by Transport and Condensation of Tungsten Oxide Vapours onto CNW Templates.

We present hybrid nanomaterial architectures, consisting of carbon nanowalls (CNW) templates decorated with tungsten oxide nanoparticles, synthesized using a mechanism based on tungsten oxide sublimation, vapor transport, followed by vapor condensation, in the absence or presence of plasma. The key steps in the decoration mechanism are the sublimation of tungsten oxides, when are exposed in vacuum at high temperature (800 °C), and their redeposition on colder surfaces (400-600 °C). The morphology and chemical composition of the hybrid architectures, as obtained from Scanning Electron Microscopy and X-ray Photoelectron Spectroscopy, are discussed with respect to substrate nature and the physical conditions of synthesis. We pointed out that the decoration process is strongly dependent on the temperature of the CNW templates and plasma presence. Thus, the decoration process performed with plasma was effective for a wider range of template temperatures, in contrast with the decoration process performed without plasma. The results are useful for applications using the sensing and photochemical properties of tungsten oxides, and have also relevance for fusion technology, tungsten walls erosion and material redeposition being widely observed in fusion machines.

Porous Tungsten Oxide: Recent Advances in Design, Synthesis, and Applications.

Tungsten oxide (WO3 ) has received ever more attention and has been highly researched over the last decade due to its being a low-cost transition metal semiconductor with tunable, yet widely stable, band gaps. This minireview briefly highlights the challenges in the design and synthesis of porous WO3 including methods, precursors, solvent effects, crystal phases, and surface activities of the porous WO3 base material. These topics are explored while also drawing a connection of how the morphology and crystal phase affect the band gap. The shifts in band gap not only impact the optical properties of tungsten but also allow tuning to operate on different energy levels, which makes WO3 highly desirable in many applications such as supercapacitors, batteries, solar cells, catalysts, sensors, smart windows, and bioapplications.

Improving Photoelectrochemical Properties of Anodic WO3 Layers by Optimizing Electrosynthesis Conditions.

Although anodic tungsten oxide has attracted increasing attention in recent years, there is still a lack of detailed studies on the photoelectrochemical (PEC) properties of such kind of materials grown in different electrolytes under various sets of conditions. In addition, the morphology of photoanode is not a single factor responsible for its PEC performance. Therefore, the attempt was to correlate different anodizing conditions (especially electrolyte composition) with the surface morphology, oxide thickness, semiconducting, and photoelectrochemical properties of anodized oxide layers. As expected, the surface morphology of WO3 depends strongly on anodizing conditions. Annealing of as-synthesized tungsten oxide layers at 500 °C for 2 h leads to obtaining a monoclinic WO3 phase in all cases. From the Mott-Schottky analysis, it has been confirmed that all as prepared anodic oxide samples are n-type semiconductors. Band gap energy values estimated from incident photon-to-current efficiency (IPCE) measurements neither differ significantly for as-synthesized WO3 layers nor depend on anodizing conditions such as electrolyte composition, time and applied potential. Although the estimated band gaps are similar, photoelectrochemical properties are different because of many different reasons, including the layer morphology (homogeneity, porosity, pore size, active surface area), oxide layer thickness, and semiconducting properties of the material, which depend on the electrolyte composition used for anodization.

Achieving Ultrahigh-Rate and High-Safety Li+ Storage Based on Interconnected Tunnel Structure in Micro-Size Niobium Tungsten Oxides.

Developing advanced high-rate electrode materials has been a crucial aspect for next-generation lithium ion batteries (LIBs). A conventional nanoarchitecturing strategy is suggested to improve the rate performance of materials but inevitably brings about compromise in volumetric energy density, cost, safety, and so on. Here, micro-size Nb14 W3 O44 is synthesized as a durable high-rate anode material based on a facile and scalable solution combustion method. Aberration-corrected scanning transmission electron microscopy reveals the existence of open and interconnected tunnels in the highly crystalline Nb14 W3 O44 , which ensures facile Li+ diffusion even within micro-size particles. In situ high-energy synchrotron XRD and XANES combined with Raman spectroscopy and computational simulations clearly reveal a single-phase solid-solution reaction with reversible cationic redox process occurring in the NWO framework due to the low-barrier Li+ intercalation. Therefore, the micro-size Nb14 W3 O44 exhibits durable and ultrahigh rate capability, i.e., ≈130 mAh g-1 at 10 C, after 4000 cycles. Most importantly, the micro-size Nb14 W3 O44 anode proves its highest practical applicability by the fabrication of a full cell incorporating with a high-safety LiFePO4 cathode. Such a battery shows a long calendar life of over 1000 cycles and an enhanced thermal stability, which is superior than the current commercial anodes such as Li4 Ti5 O12 .

Pulsed Laser Deposition of Nanostructured MoS3/np-Mo//WO3-y Hybrid Catalyst for Enhanced (Photo) Electrochemical Hydrogen Evolution.

Pulsed laser ablation of MoS2 and WO3 targets at appropriate pressures of background gas (Ar, air) were used for the preparation of new hybrid nanostructured catalytic films for hydrogen production in an acid solution. The films consisted of a nanostructured WO3-y underlayer that was covered with composite MoS3/np-Mo nanocatalyst. The use of dry air with pressures of 40 and 80 Pa allowed the formation of porous WO3-y films with cauliflower- and web-like morphology, respectively. The ablation of the MoS2 target in Ar gas at a pressure of 16 Pa resulted in the formation of amorphous MoS3 films and spherical Mo nanoparticles. The hybrid MoS3/np-Mo//WO3-y films deposited on transparent conducting substrates possessed the enhanced (photo)electrocatalytic performance in comparison with that of any pristine one (MoS3/np-Mo or WO3-y films) with the same loading. Modeling by the kinetic Monte Carlo method indicated that the change in morphology of the deposited WO3-y films could be caused by the transition of ballistic deposition to diffusion limited aggregation of structural units (atoms/clusters) under background gas pressure growth. The factors and mechanisms contributing to the enhancement of the electrocatalytic activity of hybrid nanostructured films and facilitating the effective photo-activation of hydrogen evolution in these films are considered.

Mechanistic Investigation into the Effect of Sulfuration on the FeW Catalysts for the Selective Catalytic Reduction of NOx with NH3.

Iron tungsten (FeW) catalyst is a potential candidate for the selective catalytic reduction (SCR) of NOx with ammonia because of its excellent performance in a wide operating window. Sulfur poisoning effects in SCR catalysts have long been recognized as a challenge in development of efficient catalysts for applications. In this paper, the impact of sulfuration on catalyst structure, NH3-SCR reaction performance and mechanism was systematically investigated through spectroscopic and temperature-programmed approaches. The sulfuration inhibited the SCR activity at low temperatures (<300 °C), while no evident effect was observed at high temperatures (≥300 °C). After sulfuration for FeW oxides catalyst, the organic-like with covalent S═O bonds sulfate species were mainly formed over the FeW catalysts. Combining TPD with in situ DRIFTS results, it was found that the Lewis and the Brønsted acidity were enhanced by the interaction between metal species and sulfate species due to the strong electron withdrawing effect of the S═O double bonds. The in situ DRIFTS study showed that the formation of NO2 was hindered, leading to the "fast-SCR" pathway was partly cut off by the sulfuration process and thereby the loss of SCR activity at low temperatures. However, the Langmuir-Hinshelwood reaction pathway between adsorbed NH3/NH4+ species and nitrate species was facilitated and dominated at high temperatures, making the as-synthesized FeW catalysts resistant to SO2 poisoning.

Evolution of Insulator-Metal Phase Transitions in Epitaxial Tungsten Oxide Films during Electrolyte-Gating.

An interface between an oxide and an electrolyte gives rise to various processes as exemplified by electrostatic charge accumulation/depletion and electrochemical reactions such as intercalation/decalation under electric field. Here we directly compare typical device operations of those in electric double layer transistor geometry by adopting A-site vacant perovskite WO3 epitaxial thin films as a channel material and two different electrolytes as gating agent. In situ measurements of X-ray diffraction and channel resistance performed during the gating revealed that in both the cases WO3 thin film reaches a new metallic state through multiple phase transitions, accompanied by the change in out-of-plane lattice constant. Electrons are electrostatically accumulated from the interface side with an ionic liquid, while alkaline metal ions are more uniformly intercalated into the film with a polymer electrolyte. We systematically demonstrate this difference in the electrostatic and electrochemical processes, by comparing doped carrier density, lattice deformation behavior, and time constant of the phase transitions.

Self-Limiting Oxides on WSe2 as Controlled Surface Acceptors and Low-Resistance Hole Contacts.

Transition metal oxides show much promise as effective p-type contacts and dopants in electronics based on transition metal dichalcogenides. Here we report that atomically thin films of under-stoichiometric tungsten oxides (WOx with x < 3) grown on tungsten diselenide (WSe2) can be used as both controlled charge transfer dopants and low-barrier contacts for p-type WSe2 transistors. Exposure of atomically thin WSe2 transistors to ozone (O3) at 100 °C results in self-limiting oxidation of the WSe2 surfaces to conducting WOx films. WOx-covered WSe2 is highly hole-doped due to surface electron transfer from the underlying WSe2 to the high electron affinity WOx. The dopant concentration can be reduced by suppressing the electron affinity of WOx by air exposure, but exposure to O3 at room temperature leads to the recovery of the electron affinity. Hence, surface transfer doping with WOx is virtually controllable. Transistors based on WSe2 covered with WOx show only p-type conductions with orders of magnitude better on-current, on/off current ratio, and carrier mobility than without WOx, suggesting that the surface WOx serves as a p-type contact with a low hole Schottky barrier. Our findings point to a simple and effective strategy for creating p-type devices based on two-dimensional transition metal dichalcogenides with controlled dopant concentrations.

Fabrication of Two-Dimensional Lateral Heterostructures of WS2 /WO3 ⋠H2 O Through Selective Oxidation of Monolayer WS2.

Two-dimensional (2D) lateral heterostructures have emerged as a hot topic in the fast evolving field of advanced functional materials , but their fabrication is challenging. The layer-structured WS2 was theoretically demonstrated to be inert to oxidation except for the monolayer, which can be selectively oxidized owing to the simultaneous interaction of oxygen with both sides. Combined with the theoretical calculations, a new method was developed for the successful construction of 2D lateral heterostructures of WS2 /WO3 ⋅H2 O in an ambient environment, based on a simple liquid-phase solution exfoliation. These lateral heterostructures of WS2 /WO3 ⋅H2 O have interesting properties, as indicated by enhanced photocatalytic activity toward the degradation of methyl orange (MO).