ABSTRACT
An upconversion fluorescence sensing platform was developed with upconversion nanoparticles (UCNPs) as energy donors and gold nanoparticles (AuNPs) as energy acceptors, based on the FRET principle. They were used for quantitative detection of uranyl ions (UO22+) by amplifying the signal of the hybrid chain reaction (HCR). When UO22+ are introduced, the FRET between AuNPs and UCNPs can be modulated through a HCR in the presence of high concentrations of sodium chloride. This platform provides exceptional sensitivity, with a detection limit as low as 68 pM for UO22+ recognition. We have successfully validated the reliability of this method by analyzing authentic water samples, achieving satisfactory recoveries (89.00%-112.50%) that are comparable to those of ICP-MS. These results indicate that the developed sensing platform has the capability to identify trace UO22+ in complex environmental samples.
ABSTRACT
In the title complex, [U(C10H7N3O3)O2(CH3OH)] n , the UVI cation has a typical penta-gonal-bipyramidal environment with the equatorial plane defined by one N and two O atoms of one doubly deprotonated 2-[5-(2-hy-droxy-phen-yl)-1H-1,2,4-triazol-3-yl]acetic acid ligand, a carboxyl-ate O atom of the symmetry-related ligand and the O atom of the methanol mol-ecule [U-N/Oeq 2.256â (4)-2.504â (5)â Å]. The axial positions are occupied by two oxide O atoms. The equatorial atoms are almost coplanar, with the largest deviation from the mean plane being 0.121â Å for one of the O atoms. The benzene and triazole rings of the tetra-dentate chelating-bridging ligand are twisted by approximately 21.6â (2)° with respect to each other. The carboxyl-ate group of the ligand bridges two uranyl cations, forming a neutral zigzag chain reinforced by a strong O-Hâ¯O hydrogen bond. In the crystal, adjacent chains are linked into two-dimensional sheets parallel to the ac plane by C/N-Hâ¯N/O hydrogen bonding and π-π inter-actions. Further weak C-Hâ¯O contacts consolidate the three-dimensional supra-molecular architecture. In the solid state, the compound shows a broad medium intensity LMCT transition centred around 463â nm, which is responsible for its red colour.
ABSTRACT
A direct UV-Visible absorbance spectrophotometric method was developed for the simultaneous determination of uranium and nitric acid concentration in the PUREX process samples. The simulated system consisted of uranium and nitric acid in concentration range corresponding to reprocessing of spent nuclear fuel discharged from nuclear reactor was prepared. The absorbance of these samples was measured in the range of 400-470 nm at a scan speed of 100 nm/s and resultant spectra were recorded. The changes in wavelength maxima of U(VI) absorption spectrum at different nitric acid concentration was utilized to determine the concentration of uranium and nitric acid in the sample by orthogonal signal correction assisted principal component regression. After the principle component regression the RMSEP for test data (Uranium: 3-21 g/L and acidity: 2-12 M) were 0.7 g/L and 0.4 M respectively. This method is superior to conventional method being followed for routine analysis of plant control samples in view of minimizing the generation of radioactive analytical waste consisting other corrosive reagents and reducing radiation exposure to operators during analysis. This method is amenable for online monitoring also.
ABSTRACT
BACKGROUND: In the fields of environmental monitoring and nuclear emergency, in order to obtain the relevant information of uranyl-induced environmental pollution and nuclear accident, it is necessary to establish a rapid quantitative analytical technique for uranyl ions. As a new promising technique, surface-enhanced Raman scattering (SERS) is hopeful to achieve this goal. However, uranyl ions are easily desorbed from SERS substrates under acidic conditions, and the structures of SERS substrates will be destroyed in the strong acidic aqueous solutions. Besides, the quantitative detection ability of SERS for uranyl ions needs to be promoted. Hence, it is necessary to develop new SERS substrates for accurate quantitative detection of trace uranyl in environmental water samples, especially in acidic solutions. RESULTS: In this work, we prepared silver ions/sodium alginate supramolecular hydrogel membrane (Ag+/SA SMH membrane), and the Ag+ ions from the membrane were transformed into Ag/Ag2O complex nanoparticles under laser irradiation. The Raman signal of uranyl was strongly enhanced under the synergistic interaction of electromagnetic enhancement derived from the Ag nanoparticles and charge transfer enhancement between uranyl and Ag2O. Utilizing the peak of SA (550 cm-1) as an internal standard, a quantitative detection with a LOD of 6.7 × 10-9 mol L-1 was achieved due to a good linear relation of uranyl concentrations from 1.0 × 10-8 mol L-1 to 2 × 10-6 mol L-1. Furthermore, foreign metal ions hardly affected the SERS detection of uranyl, and the substrate could determine trace uranyl in natural water samples. Particularly, the acidity had no obvious effect on SERS signals of uranyl ions. Therefore, in addition to the detection of uranyl ions in natural water samples, the proposed strategy could also detect uranyl ions in strong acidic solutions. SIGNIFICANCE AND NOVELTY: A simple one-step method was used to prepare an Ag+/SA SMH membrane for rapid quantitative detection of uranyl ions for the first time. The proposed substrate successfully detected uranyl ions under acidic conditions by immobilizing uranyl ion in hydrogel structure. In comparison with the previous studies, a more accurate quantitative analysis for uranyl ions was achieved by using an internal standard, and the proposed strategy could determine trace uranyl in either natural water samples or strong acidic solutions.
ABSTRACT
The combined chemotoxicity and radiotoxicity associated with uranium, utilized in nuclear industry and military applications, poses significant threats to human health. Among uranium pollutants, uranyl is particularly concerning due to its high absorptivity and potent nephrotoxicity in its + 6 valence state. Here, we have serendipitously found Na2SeO3 facilitates the conversion of U(VI) to U(IV) precipitates. A novel approach involving nano-chitosan loaded internally with melatonin and externally modified with selenite (NPs Cs-Se/MEL) was introduced. This modification not only enhances the conversion of U(VI) to U(IV) but also preserves the spherical nanostructure and specific surface area, leading to increased adsorption of U(VI) compared to unmodified samples. Selenite modification improves lysosomal delivery in HEK-293 T cells and kidney distribution of the nanoparticles. Furthermore, NPs Cs-Se/MEL demonstrated a heightened uranium concentration in urine and exhibited remarkable efficiency in uranium removal, resulting in a reduction of uranium deposition in serum, kidneys, and femurs by up to 52.02 %, 46.79 %, and 71.04 %, respectively. Importantly, NPs Cs-Se/MEL can be excreted directly from the kidneys into urine when carrying uranium. The results presented a novel mechanism for uranium adsorption, making selenium-containing nano-materials attractive for uranium sequestration and detoxification.
ABSTRACT
Uranium is an essential nuclear material in civilian and military areas; however, its extensive application raises concerns about the potential safety issues in the fields of environmental protection and nuclear industry. In this study, we developed an Ag/Ag2O-COF (covalent-organic framework) composite SERS substrate to detect uranyl ions (UO22+) in environmental aqueous solutions. Herein, the strong SERS effect of uranyl adsorbed in Ag/Ag2O composite and the high adsorption efficiency of COF TpPa-1 were combined to realize the trace detection of uranyl ions. This method displayed a linear range of 10-8 mol L-1 to 10-6 mol L-1 with the detection limit of 8.9 × 10-10 mol L-1 for uranyl ions. Furthermore, common metal cations and oxo-ions hardly affected the SERS detection of uranyl, which is helpful for the trace analysis of uranyl in natural water samples. Although the proposed strategy is deployed for uranyl detection, the reusable and high-efficiency system may be expanded to trace detection of other substance with Raman activity.
ABSTRACT
CONTEXT: The efficient extraction of uranyl from spent nuclear fuel wastewater for subsequent reprocessing and reuse is an essential effort toward minimization of long-lived radioactive waste. N-substituted amides and Schiff base ligands are propitious candidates, where extraction occurs via complexation with the uranyl moiety. In this study, we extensively probed chemical bonding in various uranyl complexes, utilizing the local vibrational modes theory alongside QTAIM and NBO analyses. We focused on (i) the assessment of the equatorial O-U and N-U bonding, including the question of chelation, and (ii) how the strength of the axial U = O bonds of the uranyl moiety changes upon complexation. Our results reveal that the strength of the equatorial uranium-ligand interactions correlates with their covalent character and with charge donation from O and N lone pairs into the vacant uranium orbitals. We also found an inverse relationship between the covalent character of the equatorial ligand bonds and the strength of the axial uranium-oxygen bond. In summary, our study provides valuable data for a strategic modulation of N-substituted amide and Schiff base ligands towards the maximization of uranyl extraction. METHOD: Quantum chemistry calculations were performed under the PBE0 level of theory, paired with the relativistic NESCau Hamiltonian, currently implemented in Cologne2020 (interfaced with Gaussian16). Wave functions were expanded in the cc-pwCVTZ-X2C basis set for uranium and Dunning's cc-pVTZ for the remaining atoms. For the bonding properties, we utilized the package LModeA in the local modes analyses, AIMALL in the QTAIM calculations, and NBO 7.0 for the NBO analyses.
ABSTRACT
Pentavalent uranium compounds are key components of uranium's redox chemistry and play important roles in environmental transport. Despite this, well-characterized U(V) compounds are scarce primarily because of their instability with respect to disproportionation to U(IV) and U(VI). In this work, we provide an alternate route to incorporation of U(V) into a crystalline lattice where different oxidation states of uranium can be stabilized through the incorporation of secondary cations with different sizes and charges. We show that iriginite-based crystalline layers allow for systematically replacing U(VI) with U(V) through aliovalent substitution of 2+ alkaline-earth or 3+ rare-earth cations as dopant ions under high-temperature conditions, specifically Ca(UVIO2)W4O14 and Ln(UVO2)W4O14 (Ln=Nd, Sm, Eu, Gd, Yb). Evidence for the existence of U(V) and U(VI) is supported by single-crystal X-ray diffraction, high energy resolution X-ray absorption near edge structure, X-ray photoelectron spectroscopy, and optical absorption spectroscopy. In contrast with other reported U(V) materials, the U(V) single crystals obtained using this route are relatively large (several centimeters) and easily reproducible, and thus provide a substantial improvement in the facile synthesis and stabilization of U(V).
ABSTRACT
The elimination of uranium from radioactive wastewater is crucial for the safe management and operation of environmental remediation. Here, we present a layered vanadate with high acid/base stability, [Me2NH2]V3O7, as an excellent ion exchanger capturing uranyl from highly complex aqueous solutions. The material possesses an indirect band gap, ferromagnetic characteristic and a flower-like morphology comprising parallel nanosheets. The layered structure of [Me2NH2]V3O7 is predominantly upheld by the H-bond interaction between anionic framework [V3O7]nn- and intercalated [Me2NH2]+. The [Me2NH2]+ within [Me2NH2]V3O7 can be readily exchanged with UO22+. [Me2NH2]V3O7 exhibits high exchange capacity (qm = 176.19 mg/g), fast kinetics (within 15 min), high removal efficiencies (>99%), and good selectivity against an excess of interfering ions. It also displays activity for UO22+ ion exchange over a wide pH range (2.00-7.12). More importantly, [Me2NH2]V3O7 has the capability to effectively remove low-concentration uranium, yielding a residual U concentration of 13 ppb, which falls below the EPA-defined acceptable limit of 30 ppb in typical drinking water. [Me2NH2]V3O7 can also efficiently separate UO22+ from Cs+ or Sr2+ achieving the highest separation factors (SFU/Cs of 589 and SFU/Sr of 227) to date. The BOMD and DFT calculations reveal that the driving force of ion exchange is dominated by the interaction between UO22+ and [V3O7]nn-, whereas the ion exchange rate is influenced by the mobility of UO22+ and [Me2NH2]+. Our experimental findings indicate that [Me2NH2]V3O7 can be considered as a promising uranium scavenger for environmental remediation. Additionally, the simulation results provide valuable mechanistic interpretations for ion exchange and serve as a reference for designing novel ion exchangers.
Subject(s)
Uranium , Vanadates , Uranium/chemistry , Vanadates/chemistry , Ion Exchange , Water Pollutants, Radioactive/chemistry , KineticsABSTRACT
Monitoring and purification of uranium contamination are of great importance for the rational utilization of uranium resources and maintaining the environment. In this work, an olefin-linked covalent organic framework (GC-TFPB) and its amidoxime-modified product (GC-TFPB-AO) are synthesized with 3-cyano-4,6-dimethyl-2-hydroxypyridine (GC) and 1,3,5-tris(4-formylphenyl) benzene (TFPB) by Knoevenagel condensation. GC-TFPB-AO results in specificity for rapid fluorescent/smartphone uranyl ion (UO22+) detection based on the synergistic effect of multifunctional groups (amidoxime, pyridine, and hydroxyl groups). GC-TFPB-AO features a rapid and highly sensitive detection and adsorption of UO22+ with a detection limit of 21.25 nM. In addition, it has a good recovery (100-111%) for fluorescence detection in real samples, demonstrating an excellent potential of predesigned olefin-linked fluorescent COFs in nuclear contaminated wastewater detection and removal.
ABSTRACT
Raman spectroscopy is an emerging technique for rapid and nondestructive analysis of nuclear materials for forensic and nonproliferation applications as it is a powerful tool for distinguishing multiple chemical forms of materials with similar stoichiometries. Recent developments in spectroscopic software have enabled rapid data collection with high-speed Raman spectroscopic mapping capabilities. However, some uranium-rich materials are susceptible to degradation in humid air and/or laser-induced phase transformations. To mitigate environmental or measurement-related sample degradation of potential samples of interest, we have taken a systematic approach to define optimized data collection parameters for high-throughput measurements of uranyl fluoride (UO2F2), which is an important intermediate material in the nuclear fuel cycle. First, we systematically describe the influence of optical magnification (5× to 100×), laser power, and exposure time on obtained signal for identical particles of UO2F2 and find that at low laser power and exposure times, comparable signal is obtained regardless of optical magnification. Second, we ensure sample integrity during data collection, and third, collect spectroscopic maps that employ optimized parameters to reduce the time required to obtain spatially resolved spectroscopic information. Reductions of 90% and 99% in measurement times are discussed as they relate to differences in resolving spectroscopic features of particles in identical mapping areas. During this work, we found that additional data processing options were needed and thus developed a customized Python script for importing, processing, analyzing, and visualizing Raman spectroscopic map data.
ABSTRACT
Electron microscopy (EM) techniques play a vital role in virology research including phage discovery and their identification. The use of different staining protocols based on the concept of negative staining is one of the most important steps in the EM processing. This chapter will summarize the widely used EM protocols in phage research, their advantages, and limitations. Phage-based therapy, especially recently developed nanoparticle-phage conjugates, are expected to find clinical significance in the antimicrobial resistance (AMR) epidemic. EM techniques are important to characterize these conjugates and we will also discuss the methods here.
Subject(s)
Bacteriophages , Epidemics , Microscopy, Electron , Negative Staining , Staining and LabelingABSTRACT
More than 4.5 billion tons of unconventional uranium resources [UO2(CO3)3]4- are uniformly dissolved in seawater, providing a sustainable and abundant fuel source for the development of nuclear energy. Herein, we presented a rational design and development of Ti3C2Tx nanocontainer inspired by the exceptional selectivity and affinity exhibited by superb-uranyl proteins through amino acid intercalation. The amino acid intercalation of Ti3C2Tx demonstrated exceptional UO22+ capture capacity (Arg-Ti3C2Tx, His-Ti3C2Tx, and Lys-Ti3C2Tx with qmax values of 594.46, 846.04, and 1030.17 mg/g). Furthermore, these intercalated materials exhibited remarkable sequestration efficiency and selectivity (Uinitial = â¼45.2 â¼7636 µg/L; â¼84.45% â¼98.08%; and â¼2.72 ×104 â¼1.28 ×105 KdU value), despite the presence of an overwhelming surplus of Na+, Ca2+, Mg2+, and Co2+ ions. Significantly, even in the 0.3 M NaHCO3 solution and surpassing 103-fold of the Na3VO4 system, the adsorption efficiency of Lys-Ti3C2Tx still achieved a remarkable 63.73% and 65.05%. Moreover, the Lys-Ti3C2Tx can extract â¼30.23 â¼8664.03 µg/g uranium after 24 h contact in â¼13.3 â¼5000 µg/L concentration from uranium-spiked natural seawater. The mechanism analysis revealed that the high binding capability can be attributed to the chelation of carboxyl and amino groups with uranyl ions. This innovative state-of-the-art approach in regulating uranium harvesting capability through intercalation of amino acid molecules provides novel insights for extracting uranium from seawater.
ABSTRACT
U(VI) peroxide phases (studtite and meta-studtite) are found throughout the nuclear fuel cycle and exist as corrosion products in high radiation fields. Peroxides are part of a family of reactive oxygen species (ROS) that include hydroperoxyl and superoxide species and are produced during alpha radiolysis of water. While U(VI) peroxides have been thoroughly investigated, the incorporation and stability of ROS species within studtite have not been validated. In the current study, electron paramagnetic resonance (EPR) spectroscopy was used to identify the presence of free radicals within a series of U(VI) peroxide samples containing depleted, highly enriched, and natural uranium. Density functional theory calculations indicated that the predicted EPR signals matched well with a superoxide (O2 -â ) species incorporated into the studtite structure, confirming the presence of ROS in the material. Further analysis of samples that were synthesized between 1945 and 2023 indicated that there is a correlation between the radical signal and the product of specific activity multiplied by age of the sample.
ABSTRACT
Spectator ions have known and emerging roles in aqueous metal-cation chemistry, respectively directing solubility, speciation, and reactivity. Here, we isolate and structurally characterize the last two metastable members of the alkali uranyl triperoxide series, the Rb+ and Cs+ salts (Cs-U1 and Rb-U1). We document their rapid solution polymerization via small-angle X-ray scattering, which is compared to the more stable Li+, Na+ and K+ analogues. To understand the role of the alkalis, we also quantify alkali-hydroxide promoted peroxide deprotonation and decomposition, which generally exhibits increasing reactivity with increasing alkali size. Cs-U1, the most unstable of the uranyl triperoxide monomers, undergoes ambient direct air capture of CO2 in the solid-state, converting to Cs4[UVIO2(CO3)3], evidenced by single-crystal X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. We have attempted to benchmark the evolution of Cs-U1 to uranyl tricarbonate, which involves a transient, unstable hygroscopic solid that contains predominantly pentavalent uranium, quantified by X-ray photoelectron spectroscopy. Powder X-ray diffraction suggests this intermediate state contains a hydrous derivative of CsUVO3, where the parent phase has been computationally predicted, but not yet synthesized.
ABSTRACT
This study focuses on the Medical Isotope Production Reactor (MIPR), an aqueous homogeneous reactor utilized for synthesizing medical isotopes like 99Mo. A pivotal aspect of MIPR's functionality involves the fuel solution's complex chemical interactions, particularly during reactor operation. These interactions result in the formation of precipitates, notably water filamentous uranium ore and columnar uranium ore, which can impact reactor performance. The research presented here delves into the reactions between liquid fuel uranyl nitrate and key radiolytic products, employing simulation calculations complemented by experimental validation. This approach facilitates the identification of uranium precipitate types and their formation conditions under operational reactor settings. Additionally, the article explores strategies to mitigate the formation of specific uranium precipitates, thereby contributing to the efficient and stable operation of MIPR.
ABSTRACT
Extracting uranium from seawater not only reduces radioactive contamination in seawater but also provides a source of uranium energy. However, due to the low concentration of uranium in seawater and the high salinity of seawater, extraction of uranium from seawater is challenging. In this work, we demonstrated a simple strategy to synthesize Fe-doped MXene (Fe@Ti3C2Tx) via a hydrothermal method and applied for uranium enrichment in seawater. The Fe@Ti3C2Tx exhibited excellent adsorption performance in high salinity environments. The removal capacity of Fe@Ti3C2Tx was determined to be 526.6 mg/g for UO2(CO3)22- at 328 K with quick reaction equilibrium (â¼ 30 min). Kinetic and thermodynamic analyses of UO2(CO3)22- elimination process on Fe@Ti3C2Tx surface revealed it to be a spontaneous and endothermic single-phase elimination process. FT-IR and XPS analyses further indicated that the removal mechanism of UO2(CO3)22- by Fe@Ti3C2Tx was surface complexation. Our study suggests that Fe@Ti3C2Tx can provide a feasible solution for uranium enrichment in seawater.
ABSTRACT
Uranyl ammonium carbonate (AUC), with the chemical formula UO2CO3·2(NH4)2CO3, plays a crucial role in the wet conversion of uranium hexafluoride (UF6) into uranium dioxide (UO2) or triuranium octaoxide (U3O8) for nuclear fuel production, and is used in commercial and research reactors. In this study, the precipitation of AUC from uranyl fluoride (UO2F2) solution and its subsequent conversion into U3O8 powder were investigated. AUC precipitation was performed at uranium concentrations in UO2F2 solution of 80-120 gL-1, ammonium carbonate (NH4)2CO3 concentrations of 200-400 gL-1, and (NH4)2CO3 to U (C/U) ratios of 5-9. The conversion of AUC into U3O8 powder was studied and sintering of the U3O8 nuclear material derived from ammonium uranyl carbonate (ex-AUC U3O8) was conducted at temperatures of 1000-1800 °C. The kinetics of AUC precipitation from the UO2F2 solution were studied using fundamental kinetic equations, and the kinetics of AUC conversion into UO3 were examined using an isoconversion method based on the thermogravimetric analysis of AUC. The final product of U3O8 nuclear material was characterized using typical techniques, such as thermogravimetric analysis, X-ray diffraction, and scanning electron microscopy. This study provides valuable insights into the production and characterization of AUC and U3O8 nuclear materials, which are key materials in the nuclear fuel industry.
ABSTRACT
Radioactive uranium leaks into natural water bodies mainly in the form of uranyl ions (UO22+), posing ecological and human health risks. Fluorescent europium-based metal-organic frameworks (Eu-MOFs) have been demonstrated to be effective fluorescent sensors for UO22+, but the large size, powder state and poor dispersity limit their further application. In this work, fluorescent Eu-MOFs were in-situ grown on TEMPO-oxidized cellulose nanofibers (TOCNFs), which is the first time that spherical Eu-MOF crystals with sizes below 10 nm were prepared. Fluorescence spectral analysis revealed a nine-fold increase in the fluorescence intensity of TOCNF@Eu-MOF compared to Eu-MOF. The nanocomposites achieved rapid and sensitive fluorescence quenching to UO22+ through the "antenna effect" and unsaturated Lewis basic sites on the ligands binding with UO22+. Moreover, TOCNF@Eu-MOF demonstrated excellent selectivity and anti-interference for UO22+ detection. For the nanopaper-based sensor made from TOCNF@Eu-MOF, the Stern-Volmer quenching constant (KSV) was calculated as 8.21 × 104 M-1, and the lowest limit of detection (LOD) was 6.6 × 10-7 M, significantly lower than the 1.32 × 10-6 M of Eu-MOFs. In addition, the nanopaper exhibited good fluorescence stability and cyclic detection performance, enabling the rapid and convenient detection of UO22+ in the aqueous phase within 30 s by simple dipping.
ABSTRACT
In this work, it is proposed the development of organic semiconductors (OS) based on uranyl(VI) complexes. The above by means of the synthesis and the characterization of the complexes by Infrared spectroscopy, Nuclear magnetic resonance spectroscopy, mass spectrometry, and X-ray diffraction. Films of these complexes were deposited and subsequently, topographic and structural characterization was carried out by Scanning Electron Microscopy, X-ray diffraction, and Atomic Force Microscopy. Additionally, the nanomechanical evaluation was performed to know the stiffness of uranyl films using their modulus of elasticity. Also, the optical characterization took place in the devices and their bandgap value ranges between 2.40 and 2.93â eV being the minor for the film of the uranyl complex with the N on pyridine in position 4 (2 c). Finally, the electrical behavior of the uranyl(VI) films was evaluated, and important differences were obtained: the uranyl complex with the N on pyridine in position 2 (2 a) film is not influenced by changes in lighting and its current density is in the order of 10-3â A/cm2. The film with uranyl complex with the N on pyridine in position 3 (2 b) and 2 c presents a greater current flow under lighting conditions and two orders of magnitude larger than in film 2 a. In these films 2 b and 2 c, ohmic behavior occurs at low voltages, while at high voltages the charge transport changes to space-charge limited current behavior.