Flours from Spondias mombin and Spondias tuberosa seeds: Physicochemical characterization, technological properties, and antioxidant, antibacterial, and antidiabetic activities.

Yellow mombin (Spondias mombin) and Brazil plum (Spondias tuberosa) seeds are byproducts of exploiting their pulp and currently have no relevant food or industrial applications. Thus, the present study aimed to evaluate the physicochemical, technological, and functional characteristics of flours obtained from yellow mombin (YMF) and Brazil plum (BPF) residues. The flours presented a high percentage of insoluble fiber (68.8-70.2 g/100 g) and low carbohydrate (2.7-4.0 g/100 g) and caloric (91.9-95.3 kcal) values. The flours showed potential for technological application. In addition, the highest concentration of total phenolic content (31.1-50.2 mg GAE/g) was obtained with 70% acetone, which provided excellent results for antioxidant capacity evaluated by 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (81.0%-89.7%) and 2,2-diphenyl-1-picrylhydrazyl (60.6%-69.1%) radical scavenging capacity assays. Flour extracts in 70% acetone also exhibited inhibition of α-amylase (63.3%-78.8%) and amyloglucosidase (63.5%-71.0%). The antibacterial study revealed that extracts inhibited the growth of Escherichia coli, Burkholderia cepacia, and Burkholderia multivorans. Therefore, this study suggests the use of yellow mombin and Brazil plum residues for different food or industrial applications. PRACTICAL APPLICATION: The knowledge gained from this study will open a new approach to add value to yellow mombin and Brazil plum fruit seeds as sources of fiber and bioactive compounds, with promising application in the formulation of functional and nutraceutical products, benefiting both a sustainable environment and a sustainable industry.

Acetone Detection and Classification as Biomarker of Diabetes Mellitus Using a Quartz Crystal Microbalance Gas Sensor Array.

A gas sensor array was developed and evaluated using four high-frequency quartz crystal microbalance devices (with a 30 MHz resonant frequency in fundamental mode). The QCM devices were coated with ethyl cellulose (EC), polymethylmethacrylate (PMMA), Apiezon L (ApL), and Apiezon T (ApT) sensing films, and deposited by the ultrasonic atomization method. The objective of this research was to propose a non-invasive technique for acetone biomarker detection, which is associated with diabetes mellitus disease. The gas sensor array was exposed to methanol, ethanol, isopropanol, and acetone biomarkers in four different concentrations, corresponding to 1, 5, 10, and 15 µL, at temperature of 22 °C and relative humidity of 20%. These samples were used because human breath contains them and they are used for disease detection. Moreover, the gas sensor responses were analyzed using principal component analysis and discriminant analysis, achieving the classification of the acetone biomarker with a 100% membership percentage when its concentration varies from 327 to 4908 ppm, and its identification from methanol, ethanol, and isopropanol.

Solvent-Induced Lag Phase during the Formation of Lysozyme Amyloid Fibrils Triggered by Sodium Dodecyl Sulfate: Biophysical Experimental and In Silico Study of Solvent Effects.

Amyloid aggregates arise from either the partial or complete loss of the native protein structure or the inability of proteins to attain their native conformation. These aggregates have been linked to several diseases, including Alzheimer's, Parkinson's, and lysozyme amyloidosis. A comprehensive dataset was recently reported, demonstrating the critical role of the protein's surrounding environment in amyloid formation. In this study, we investigated the formation of lysozyme amyloid fibrils induced by sodium dodecyl sulfate (SDS) and the effect of solvents in the medium. Experimental data obtained through fluorescence spectroscopy revealed a notable lag phase in amyloid formation when acetone solution was present. This finding suggested that the presence of acetone in the reaction medium created an unfavorable microenvironment for amyloid fibril formation and impeded the organization of the denatured protein into the fibril form. The in silico data provided insights into the molecular mechanism of the interaction between acetone molecules and the lysozyme protofibril, once acetone presented the best experimental results. It was observed that the lysozyme protofibril became highly unstable in the presence of acetone, leading to the complete loss of its ß-sheet conformation and resulting in an open structure. Furthermore, the solvation layer of the protofibril in acetone solution was significantly reduced compared to that in other solvents, resulting in fewer hydrogen bonds. Consequently, the presence of acetone facilitated the exposure of the hydrophobic portion of the protofibril, precluding the amyloid fibril formation. In summary, our study underscores the pivotal role the surrounding environment plays in influencing amyloid formation.

Phytochemical characterization and toxicological activity attributed to the acetonic extract of South American Vassobia breviflora.

The particular plant species found in southern Brazil, Vassobia breviflora (Solanaceae) has only a few apparent studies examining its biological effect. Thus, the aim of the present study was to determine the activity of the acetone extract fraction derived from V. breviflora. Four compounds were identified by ESI-qTOF-MS: eucalrobusone R, aplanoic acid B, pheophorbide A, and pheophytin A. In addition, 5 compounds were identified by HPLC-PDA-MS/MS: all-trans-lutein, 15-cis-lutein, all-trans-ß-carotene, 5,8-epoxy-ß-carotene, and cis-ß-carotene. Cell lines A549 (lung cancer), A375 (melanoma cancer) and HeLa (cervical cancer) were incubated with different concentrations of each studied extract using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), lactate dehydrogenase (LDH), and 2'-7'dichlorofluorescin diacetate (DCFH-DA) assays. The acetonic extract exhibited cytotoxic activity at a concentration of 0.03 mg/ml in the HeLa strain and 0.1 mg/ml in the others. In addition to increased production of reactive oxygen species (ROS). Antibacterial activity was assessed utilizing minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) in 9 ATCCs strains and 7 clinical isolates, as well as determination of biofilm production. Data demonstrated that MIC and MBC were approximately 256 mg/ml in most of the strains tested and antibiofilm effect at S. aureus, S. epidermidis, A. baumannii, and E. faecalis, concentrations below the MIC. Genotoxic activity on plasmid DNA did not produce significant elevated levels in breaks in the isolated genetic material.

Synthesis of chalcones and their antimicrobial and drug potentiating activities.

The increased resistance of microorganisms to antimicrobial drugs makes it necessary to search for new active compounds, such as chalcones. Their simple chemical structure makes them molecules easy to synthesize. Therefore, the aim of this study was to evaluate the antimicrobial and potentiating activity of antibiotics and antifungals by synthetic chalcones against strains of Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans and Candida tropicalis. The synthesis of chalcones was carried out by Claisen-Schimidt aldol condensation. Nuclear Magnetic Resonance (NMR) and Gas Chromatography Coupled to Mass Spectrometry (GC/MS) were also performed. Microbiological tests were performed by the broth microdilution method, using gentamicin, norfloxacin and penicillin as standard drugs for the antibacterial assay, and fluconazole for the antifungal assay. Three chalcones were obtained (1E,4E)-1,5-diphenylpenta-1,4-dien-3-one (DB-Acetone), (1E,3E,6E,8E)-1,9-diphenylnone-1,3,6,8-tetraen-5-one (DB-CNM), (1E,4E)-1,5-bis (4-methoxyphenyl) penta-1,4-dien-3-one (DB-Anisal). The compound DB-Acetone was able to inhibit P. aeruginosa ATCC 9027 at a concentration of 1.4 × 102 µM (32 µg/mL), while DB-CNM and DB-Anisal inhibited the growth of S. aureus ATCC 25923 at 17.88 × 102 µM and 2.71 × 101 µM (512 µg/mL and 8 µg/mL) respectively. In the combined activity, DB-Anisal was able to potentiate the effect of the three antibacterial drugs tested against E. coli 06, norfloxacin (128 for 4 µg/mL ±1) against P. aeruginosa 24 and penicillin (1,024 for 16 µg/mL ±1) against S. aureus 10. In antifungal assays, chalcones were not able to inhibit the growth of fungal strains tested. However, both showed potentiating activity with fluconazole, ranging from 8.17 x 10-1 µM (0.4909 µg/mL) to 2.35 µM (13.96 µg/mL). It is concluded that synthetic chalcones have antimicrobial potential, demonstrating good intrinsic activity against fungi and bacteria, in addition to potentiating the antibiotics and antifungal tested. Further studies are needed addressing the mechanisms of action responsible for the results found in this work.

Production of acetone, butanol, and ethanol by electro-fermentation with Clostridium saccharoperbutylacetonicum N1-4.

This manuscript describes the effect of altering the extracellular redox potential during the production of acetone, butanol, and ethanol on a dual chamber H-type microbial fuel cell by fermenting glucose with Clostridium saccharoperbutylacetonicum N1-4. Extracellular redox potential modification was achieved by either supplementing the microbial broth with the redox agent NADH or by poising the cathode potential at -600 mV vs. Ag/AgCl. The addition of NADH was found to foment the production of acetone via fermentation of glucose. The addition of 200 mM of NADH to the catholyte rendered the highest production of acetone (2.4 g L-1), thus outperforming the production of acetone by conventional fermentation means (control treatment) by a factor of 2.2. The experimental evidence gathered here, indicates that cathodic electro-fermentation of glucose favors the production of butanol. When poising the cathode potential at -600 mV vs Ag/AgCl (electro-fermentation), the largest production of butanol was achieved (5.8 g L-1), outperforming the control treatment by a factor of 1.5. The production of ABE solvents and the electrochemical measurements demonstrate the electroactive properties of C. saccharoperbutylacetonicum N1-4 and illustrates the usefulness of bio-electrochemical systems to improve conventional fermentative processes.

Effect of Extra Hydrophobic Resin Layer on Bonding of Universal Adhesive Systems to Enamel.

OBJECTIVE: The objective of this study was to compare the effect of solvent in universal adhesives (UA) and the application of an extra layer of hydrophobic bonding resin on enamel shear bond strengths (SBS). METHODS AND MATERIALS: Crowns of 224 bovine mandibular incisors were embedded in acrylic resin, wet-polished up to 600-grit silicon carbide paper and assigned to 3 UAs with different solvents (n=32): ethanol-based UA (ADU, AdheSE Universal, Ivoclar Vivadent); isopropanol-based UA (PBU, Prime&Bond Universal, Dentsply Sirona); and acetone-based UA (OPT, OptiBond Universal, Kerr Co). The same UAs were also applied with an extra layer of a hydrophobic bonding resin (HLB, Heliobond, Ivoclar Vivadent): ADU + HLB; PBU + HLB; and OPT + HLB. HLB alone was used as control. Enamel was etched with 37.5% H3PO4 (Kerr Gel Etchant, Kerr Co) for 15 seconds, rinsed with water, and air dried. UAs were applied according to the respective manufacturer's instructions. After adhesive application, composite cylinders (Filtek Z250, 3M Oral Care) were built up and light-cured (40 seconds/increment, 40 J/cm2) keeping the light tip in contact with the mold. Specimens were stored in water for 24 hours (24H) or for 6 months (6M). A knife-edged metallic rod (Ø=2.8-mm semicircular notch) loaded the composite cylinders until fracture. Mode of failure was analyzed with optical microscopy (40×). Statistics included twoway analysis of variance (ANOVA; adhesive strategy and water storage) and Tukey honestly significant difference (HSD) post hoc test (α=95%). RESULTS: Mean enamel SBS ranged from 3.6 (±2.2) MPa (HLB/6M) to 24.7 (±7.1) MPa (ADU + HLB/6M). ANOVA revealed significant differences for adhesive strategy (p≤0.001) but no significant differences for water storage (p>0.05). All UAs resulted in similar mean enamel SBS with or without an extra layer of HLB at 24H. After 6M, only ADU resulted in higher enamel SBS when an extra layer of HLB was applied. All UAs resulted in higher mean enamel SBS than HLB (control). Most failures were adhesive exception for PBU/HLB/6M, which had mostly mixed failures. CONCLUSIONS: UAs resulted in statistically higher enamel SBS than the nonsolvated hydrophobic bonding resin (control), regardless of the solvent in their composition. Application of an extra layer of hydrophobic bonding resin over UAs did not improve mean enamel SBS for isopropanol- and acetone-based UAs but did improve mean enamel SBS for the ethanol-based UA after 6M. Resin composite bonding to enamel using a hydrophobic bonding resin alone is not recommended.

Metal Oxide Gas Sensors to Study Acetone Detection Considering Their Potential in the Diagnosis of Diabetes: A Review.

Metal oxide (MOx) gas sensors have attracted considerable attention from both scientific and practical standpoints. Due to their promising characteristics for detecting toxic gases and volatile organic compounds (VOCs) compared with conventional techniques, these devices are expected to play a key role in home and public security, environmental monitoring, chemical quality control, and medicine in the near future. VOCs (e.g., acetone) are blood-borne and found in exhaled human breath as a result of certain diseases or metabolic disorders. Their measurement is considered a promising tool for noninvasive medical diagnosis, for example in diabetic patients. The conventional method for the detection of acetone vapors as a potential biomarker is based on spectrometry. However, the development of MOx-type sensors has made them increasingly attractive from a medical point of view. The objectives of this review are to assess the state of the art of the main MOx-type sensors in the detection of acetone vapors to propose future perspectives and directions that should be carried out to implement this type of sensor in the field of medicine.

Nicotiana tabacum Leaf Waste: Morphological Characterization and Chemical-Functional Analysis of Extracts Obtained from Powder Leaves by Using Green Solvents.

Tobacco cultivation and industrialization are characterized by the production of trillions of pre-harvest and post-harvest waste biomasses each year with the resulting negative effects on the environment. The leaves of blunt, pre-harvest waste, could be further used to obtain bioactive metabolites, i.e., polyphenols and alkaloids, for its potential cosmetic use. This study was conducted to obtain bio-compounds from pre-harvest tobacco leaf waste (var. Virginia) by applying conventional and green solvents (NaDES). Leaves and ground leaf waste were characterized based on their microscopic features. Conventional solvents, such as water, acetone, ethanol, and non-conventional solvents, such as Natural Deep Eutectic Solvents (NaDES), i.e., sucrose:lactic acid (LAS), frutose:glucose:sucrose (FGS), lactic acid:sucrose:water (SALA), choline chloride:urea (CU), and citric acid: propylene glycol (CAP) were used for bioactive extraction from tobacco waste powder. CU, FGS, and acetone/ethanol had similar behavior for the best extraction of alkaloids (6.37-11.23 mg ACE/g tobacco powder). LAS, FGS, SALA, and CU were more effective in phenolic compound extraction than conventional solvents (18.13-21.98 mg AGE/g tobacco powder). Because of this, LAS and SALA could be used to obtain phenolic-enriched extracts with lower alkaloid content rather than CU and FGS. Extracts of the powder obtained with conventional solvent or CU showed a high level of sugars (47 mg/g tobacco powder) The ABTS antioxidant capacity of tobacco leaf powder was higher in the extracts obtained with CU, FGS, and acetone (SC50 1.6-5 µg GAE/mL) while H2O2 scavenging activity was better in the extracts obtained with LAS, CAP and SALA (SC50 3.8-8.7 µg GAE/mL). Due to the biocompatibility of the NaDES with the components of tobacco leaf waste, the opportunity to apply these extracts directly in antioxidant formulations, such as cosmetics, phytotherapic, and other formulations of topic use seems promising. Furthermore, NaDES constituents, i.e., urea and organic acid can also have beneficial effects on the skin.

Photo-catalytic and biomedical applications of one-step, plant extract-mediated green-synthesized cobalt oxide nanoparticles.

In the present work, for the first time, green chemically synthesized and stabilized Co3O4 nanoparticles were employed for catalytic conversion of isopropyl alcohol to acetone by dehydrogenation of IPA. Plant extract of Rosmarinus officinalis was used as a reducing and stabilizing agent for this synthesis. The biosynthesized Co3O4 nanoparticles were annealed at 450℃ followed by their physiochemical characterizations through XRD, SEM, AFM, and FTIR. Size distribution information collected through XRD and AFM back each other, and it was found to be 6.5 nm, having the highest number of nanoparticles in this size range. While SEM confirms the self-arranging property of synthesized nanoparticles due to their magnetic nature, furthermore, the biogenic Co3O4 nanoparticles were studied for their catalytic potential to convert isopropyl alcohol to acetone with the help of a UV-Visible spectrophotometer. The highest photocatalytic conversion of 99% was obtained in time period of 48 s. For the first time ever, nanoparticles were used for 5 cycles to evaluate their recyclable nature and conversion fell from 99 to 86% and the end of the 5th cycle. Later anti-bacterial activity against 3 Gram-positive and 3 Gram-negative strains gave the highest inhibition value of 99% against Streptococcus pneumoniae at 500 µg/mL. Finally, a cytotoxicity study on synthesized nanomaterials was carried out by exposing freshly drawn human macrophages to them. It was found that even at the highest concentration of 500 µg/mL, the nanoparticles showed only 28% lysis.

Conversion of acetone and mixed ketones to hydrocarbons using HZSM-5 catalyst in the carboxylate platform.

In this study, two different feeds were treated to produce hydrocarbons: (1) reagent-grade acetone, and (2) mixed ketones obtained from lignocellulosic biomass via the carboxylate platform. Acetone and mixed ketones underwent catalytic self-condensation over HZSM-5. For acetone, HZSM-5(80) was used, and the experiments were conducted in two sets: (1) vary temperature (305-415°C) at P = 101 kPa (abs) and weight hourly space velocity (WHSV) = 1.3 h-1; (2) vary WHSV (1.3-7.9 h-1) at T = 350 and 415°C, and P = 101 kPa (abs). For acetone over HZSM-5(280), the experiments were conducted in two sets: (1) vary WHSV (1.3-6.5 h-1) at T = 415°C, and P = 101 kPa (abs); and (2) vary WHSV (1.3-11.8 h-1) at P = 790 kPa (abs) and T = 415°C. For mixed ketones, HZSM-5(280) was used at WHSV = 1.9 h-1, T = 430-590°C, and P = 101 kPa (abs). For acetone at higher temperatures, the conversion was 100% and the liquid products were aromatics centered on C8. At low temperatures, conversion was less and the carbon liquid distribution was centered on C9 (mainly mesitylene). For mixed ketones, catalyst deactivation was higher causing product concentrations to change over time, and the highest conversion reached was 40%.

Synthesis and spectroscopic and structural characterization of three new 2-methyl-4-styrylquinolines formed using Friedländer reactions between (2-aminophenyl)chalcones and acetone.

Three new 2-methyl-4-styrylquinoline derivatives have been synthesized in high yields using Friedländer reactions between chalcones [1-(2-aminophenyl)-3-arylprop-2-en-1-ones] and acetone, and characterized using IR, 1H and 13C NMR spectroscopy, and mass spectrometry, and by crystal structure analysis. In (E)-4-(4-fluorostyryl)-2-methylquinoline, C18H14FN, (I), the molecules are joined into cyclic centrosymmetric dimers by C-H...N hydrogen bonds and these dimers are linked into sheets by π-π stacking interactions. The molecules of (E)-2-methyl-4-[4-(trifluoromethyl)styryl]quinoline, C19H14F3N, (II), are linked into cyclic centrosymmetric dimers by C-H...π hydrogen bonds and these dimers are linked into chains by a single π-π stacking interaction. There are no significant hydrogen bonds in the structure of (E)-4-(2,6-dichlorostyryl)-2-methylquinoline, C18H13Cl2N, (III), but molecules related by translation along [010] form stacks with an intermolecular spacing of only 3.8628 (2) Å. Comparisons are made with the structures of some related compounds.

Extraction of Acetogenins Using Thermosonication-Assisted Extraction from Annona muricata Seeds and Their Antifungal Activity.

The objective of this work was to find the optimal conditions by thermosonication-assisted extraction (TSAE) of the total acetogenin content (TAC) and yield from A. muricata seeds, assessing the effect of the temperature (40, 50, and 60 °C), sonication amplitude (80, 90, and 100%), and pulse-cycle (0.5, 0.7, and 1 s). In addition, optimal TSAE conditions of acetogenins (ACGs) were compared with extraction by ultrasound at 25 °C and the soxhlet method measuring TAC and antioxidant capacity. Moreover, solubility and identification of isolated ACGs were performed. Furthermore, the antifungal activity of ACGs crude extract and isolated ACGs was evaluated. Optimal TSAE conditions to extract the highest TAC (35.89 mg/g) and yield (3.6%) were 50 °C, 100% amplitude, and 0.5 s pulse-cycle. TSAE was 2.17-fold and 15.60-fold more effective than ultrasound at 25 °C and the Soxhlet method to extract ACGs with antioxidant capacity. Isolated ACGs were mostly soluble in acetone and methanol. Seven ACGs were identified, and pseudoannonacin was the most abundant. The inhibition of Candida albicans, Candida krusei, and Candida tropicalis was higher from isolated ACGs than crude extract. TSAE was effective to increase the yield in the ACGs extraction from A. muricata seeds and these ACGs have important antifungal activity.

Cleaning and microstructural effects of amyl acetate on pulp chamber dentin impregnated with epoxy resin-based endodontic sealer.

OBJECTIVE: To evaluate the cleaning potential of 95% ethanol, acetone, and amyl acetate solutions used solely or in association, to remove epoxy resin-based sealer residues from pulp chamber dentin and their microstructural effects. MATERIALS AND METHODS: One hundred and eighty bovine incisor specimens were divided into nine groups according to the cleaning protocol: ET (ethanol); AC (acetone); AA (amyl acetate); E1: AA+AC; E2: AA+ET; E3: AC+ET; E4: AA+AC+ET; PC (positive control), and NC (negative control). All groups were impregnated with epoxy resin-sealer, except NC. Ninety specimens were divided into groups (n = 10) for evaluation of persistence of residues and amount of open dentinal tubules by SEM analysis and evaluation of chemical compounds on the dentin surface after cleaning with electron dispersive spectroscopy. The others 90 specimens were submitted to Knoop microhardness evaluation. Persistence of residues data were submitted to the Kruskal Wallis and Dunn tests (α = 0.05). Open dentinal tubules and microhardness data were submitted to one-way ANOVA and Mann Whitney tests (α = 0.05). RESULTS: AA and E4 protocols showed the lowest persistence of residues. E4 group had the highest incidence of open dentinal tubules. E3 and E4 groups showed no changes in the atomic ratio Ca/P, which was similar to NC group. E4 group did not present W, an element presents in all the other groups. ET and E4 protocols showed the smallest reduction in dentin microhardness. CONCLUSIONS: The combination of amyl acetate, acetone and ethanol is the most effective and safe protocol to remove epoxy sealer residues on pulp chamber dentin. Moreover, it has the lowest microhardness reduction. CLINICAL SIGNIFICANCE: The combined use of amyl acetate, acetone, and ethanol enhanced the cleaning of pulp chamber dentin with minimal microstructural damage.

EFFECT OF DIFFERENT SOLVENTS ON THE OPTICALLY STIMULATED LUMINESCENCE SIGNAL FROM MGB4O7:CE,LI-LOADED POLYMER FILMS.

The detailed dose analysis at the extremities remains a challenge, without affecting operators' mobility and their tactile sense. Using films loaded with optically stimulated luminescence (OSL) crystals have been studied in order to overcome some of these challenges in 2D dosimetry. In this work, we investigated flexible polymeric films loaded with MgB4O7:Ce,Li to acquire a better understanding of the dependence of the dosimetric signal characteristics on the production process and the influence of using different powder grain sizes. In film production, five different solvents were used: acetone-benzene, dichloromethane, chloroform, tetrahydrofuran and formic acid. Our results indicate that acetone-benzene is the solvent mixture that less influences the signal emitted by treated crystals, in comparison with the signal emitted by the pristine crystal powder. Conversely, by using formic acid, the crystalline structure of the sample was most severely modified, leading to a drastic reduction of the emitted OSL signal. We found that the extent of the grain surface in contact with the solvent in the process is important and should be taken into consideration when choosing the proper grain size to be used. Highlights  Polymeric films loaded with MgB4O7:Ce,Li crystals were produced using different solvents.Different effect on the OSL signal was found depending on the used solvent.Among the evaluated solvents, acetone-benzene was the one that less affected the OSL signal.

A new technique for incorporation of TiO2 nanotubes on a pre-sintered Y-TZP and its effect on bond strength as compared to conventional air-borne particle abrasion and silicatization TiO2 nanotubes application on pre-sintered Y-TZP.

OBJECTIVE: This study evaluated the microshear bond strength of a resin cement to Y-TZP after different methods of TiO2 nanotubes (nTiO2) incorporation on pre-sintered Y-TZP surfaces. METHODS: nTiO2 were synthesized and incorporated on Y-TZP slices as follows (n = 15): 1) nTiO2 mixed with isopropyl alcohol/manual application (MAl); 2) nTiO2 mixed with acetone/manual application (MAc); 3) nTiO2 mixed with isopropyl alcohol/high-pressure vacuum application (HPVAl); 4) nTiO2 mixed with acetone/high-pressure vacuum application (HPVAc). As controls, surfaces were sandblasted with Al2O3 (OX) or Rocatec silicatization (ROC). All ceramics were sintered after nTiO2 incorporation. Surface treatments of OX and ROC were made after sintering. Surfaces were characterized by confocal laser microscopy, scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Resin composite cylinders (1.40 mm diameter and 1 mm height) were cemented with a resin cement, stored in water at 37 °C for 24 h and thermocycled for 10 000 cycles before microshear bond strength evaluation. Data were analyzed with one-way ANOVA and Games-Howell (α = 0.05), and fracture analysis was performed using a stereomicroscope. RESULTS: EDS confirmed the presence of TiO2 on treated Y-TZP. The confocal analysis showed higher roughness for HPVAc and OX. There were significant differences between surface treatments (p < 0.001). HPVAl (22.96 ± 10.3), OX (34.16 ± 7.9) and ROC (27.71 ± 9.4) showed higher microshear bond strengths and were statistically similar (p > 0.05). MAC showed intermediary values, and HPVAc and MAl presented decreased bond strength, with a high percentage of premature debonding. CONCLUSION: High-pressure vacuum application of nTiO2 mixed with isopropyl alcohol was able to produce bond strength values compared to conventional air abrasion and Rocatec silicatization. SIGNIFICANCE: The infiltration of TiO2 nanostructures on the pre-sintered Y-TZP is an interesting approach that can improve bond strength without the need of sandblasting methods.

Protective effect of kavain in meristematic cells of Allium cepa L.

Kavain is one of the main kavalactones of Piper methysticum (Piperaceae) with anxiolytic, analgesic, and antioxidant activities. Therefore, the aim of the study was to evaluate the cytotoxic, mutagenic, and antimutagenic potential of kavain in Allium cepa cells. Roots of A. cepa were transferred to the negative (2% acetone) and positive (10 µg/mL of Methylmethanesulfonate, MMS) controls and to the concentrations of kavain (32, 64 and 128 µg/mL) for 48 h. A total of 5,000 meristematic cells were analyzed under an optical microscope to determine the mitotic index, mean number of chromosomal alterations and percentage of damage reduction. Data were analyzed by Kruskal-Wallis test (p <0.05). All concentrations of kavain were not cytotoxic and did not show significant chromosomal changes when compared to 2% acetone. Kavain showed a cytoprotective effect in the pre (128 µg/mL) and in the post-treatment (32 and 64 µg/mL) and reduced damage against the mutagenic action of MMS in all concentrations of the pre and simultaneous and at the highest of post (128 µg/mL). Kavain promoted a significant reduction in micronuclei, nuclear buds and chromosomal losses in relation to MMS. The observed data indicate the importance of kavain for the inhibition of damage and chemoprevention.

Phenolic Acids and Flavonoids in Acetonic Extract from Quince (Cydonia oblonga Mill.): Nutraceuticals with Antioxidant and Anti-Inflammatory Potential.

Quince (Cydonia oblonga Mill.) is a potential source of polyphenolic compounds related with beneficial biological processes. In this study polyphenols from quince fruit were extracted with aqueous acetone at different ratios. A polyphenol profile was identified and quantified by LC-ESI-QqQ. The antioxidant capacity (ORAC and DPPH) and anti-inflammatory effect (inhibition of COX-2 cyclooxygenase) were evaluated in vitro. The results indicated an effect of the aqueous acetone ratio on the extraction of polyphenolic compounds. The higher extraction yields of polyphenolic compounds were attained with 60-75% aqueous acetone. However, extracts obtained with 85% aqueous acetone promoted higher antioxidant and anti-inflammatory effects. Optimal scaling analysis indicated that hydroxycinnamic acids (quinic and chlorogenic), hydroxybenzoic acids (vanillic and syringic), flavonoids (quercetin and kaempferol), dihydrochalcones (neohesperidin) and flavones (acacetin) are related to the antioxidant activity of quince. While phenolic acids, flavonols (kaempferol-3-O-glucoside and rutin) and flavanols (epicatechin) generated the anti-inflammatory effect by inhibiting 52.3% of the COX-2 enzyme. Therefore, a selective extraction of phenolic mix can reduce oxidative stress or inflammatory processes. This suggests the use of quince as a natural source with significant nutraceutical potential.

Lernaea cyprinacea Linnaeus, 1758 (Copepoda: Lernaeidae) infection on Betta rubra Perugia, 1893 (Anabantiformes: Osphronemidae) from Aceh Province, Indonesia.

Betta rubra is an ornamental freshwater fish endemic to northern Sumatra, Indonesia. The B. rubra population has decreased in recent decades, and is classified as an endangered species in the IUCN Red List. This study aims to report for the first time infection by L. cyprinacea in B. rubra harvested from the Aceh Besar region of Indonesia. The fish samples were obtained from the Cot Bira tributaries, Aceh Besar District, Indonesia from January to December 2020. The results showed that the parasite infected 6 out of 499 samples in August and September, with a prevalence and intensity rate of 1% and 2 parasites/fish, respectively. The eyes and pectoral fins were the common infection sites. Despite B. rubra is not an optimal host (small size) for the parasite, this parasite might serve as additional threatening factors for the endangered B. rubra fish population.

Extraction and characterization of Argentine red shrimp (Pleoticus muelleri) phospholipids as raw material for liposome production.

Phospholipids rich in omega-3 fatty acids from Argentine red shrimp waste were explored as a source to produce food-grade liposomes. Partially purified phospholipids (PL-AS), hexane-soluble (HxSE) and acetone-soluble (Ac-SE) lipid co-extracts, were characterized in terms of extraction yield (2.0%, 1.46% and 4.51%, respectively), chemical composition (fatty acids, tocopherols, sterols, astaxanthin) and thermal stability. Based on lipid fractionation, PL-AS presented 85% phospholipids, while neutral lipids were mostly present in HxSE (75%) and free FA in AcSE (34%), the latter suggesting significant fat hydrolysis. Palmitic, oleic, eicosapentaenoic (EPA) and docosahexaenoic (DHA) acids predominated in the phospholipid fraction of PL-AS, mainly constituted by phosphatidylcholine (PC) (96%). The most abundant phospholipid was identified at m/z 760.59, composed of PC, with C16:0/C18:1 as the most probable FA combination. Unilamellar spherical liposomes were successfully made of PL-AS (≈140 nm, 0.248 PDI, -68.5 mV ζ potential), showing high stability for 28 days at 4 °C.