Development and validation of LC-MS/MS method for trace analysis of acrylamide, acrylic acid and N, N-methylene bis acrylamide in sandy loam soil.

Acrylamide and N, N-methylene bis acrylamide are most commonly used monomer and crosslinker compounds employed in synthesis of super absorbent hydrogels. When applied as soil conditioners, there are apprehensions that these hydrogels degrade over time and thus may release the toxic monomers in the soil. A method was thus developed using Liquid Chromatography tandem mass spectrometry (LC-MS/MS) for the trace level quantification of acrylamide (AD), acrylic acid (AA) and N,N-methylene-bis-acrylamide (MBA) in sandy loam soil amended by two test hydrogels the Pusa Hydrogel and SPG 1118 hydrogel prepared using AD and MBA. The MRM (multiple reaction monitoring) transitions were optimized for both the compounds. Soil samples were extracted using dispersive solid-phase extraction (dSPE) with a modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) technique, employing acetonitrile. All analytes were quantified at trace levels within a five-minute run using UHPLC equipped with a C-18 column. Single laboratory validation of the developed method in soil matrix was conducted based on specificity, linearity, sensitivity, accuracy, precision, matrix effect and measurement of uncertainty. LC-MS/MS exhibited a linear response in the concentration range of 0.001 to 1 µg mL-1, with correlation coefficient >+0.99. Acceptable recovery (within 70-120 %) with repeatability (%RSD ≤20 %) was obtained at 0.01 to 1 µg g-1 fortification levels. LOQ (Limit of quantification) of the method for AD, AA and MBA in soil matrix were 0.05, 1 and 0.01 µg g-1, respectively. Both intra-laboratory repeatability and intermediate precision at LOQ suggested well acceptable precise (HorRat≈ 0.3) method for quantification. Matrix enhancement effect was observed in the order: AA>AD>MBA. The Expanded Uncertainty (EU) in soil matrix at LOQ was 21.64 %, 28 % and 19 % for AD, AA and MBA respectively. Groundnut and wheat grown with application of the hydrogels showed no detectable residues of monomers in soil samples (total n = 60) near the root zone at the time of crop harvesting.

The burden of disease due to dietary exposure to acrylamide in Italy: A risk assessment-based approach.

The aim of this study was to assess Italian consumers' risk of cancer and burden of disease due to dietary exposure to acrylamide. Our model considered six age groups such as infants, toddlers, other children, adolescents, adults, and the elderly, and the consumption of 31 food items. Using a risk-assessment-based approach, we first characterized the risk of neoplastic effects using the margin of exposure method. Then the risk of kidney, endometrial, breast, ovarian cancer, and total cancer was estimated using adjusted cancer slope factors while the burden of disease was quantified using Disability-adjusted Life Years (DALYs). The highest risk for females was related to breast cancer while the lowest was for kidney cancer. We found a comparable risk of total cancer among Italian males and females, estimated at around 1.59 to 3.57 cases per 100,000 individuals annually with the burden ranging between 12.3 - 25.4 and 11.4 - 24.1 DALYs respectively. Our findings provide insights on the multifaceted impact of acrylamide on public health by offering detailed insights into age-specific exposure levels, diverse cancer risks, and the dietary burden of disease related to acrylamide. Targeted interventions and policies can be developed towards mitigating the health risks associated with acrylamide exposure.

Chemical composition and sensory profiling of coffees treated with asparaginase to decrease acrylamide formation during roasting.

Acrylamide is an amide formed in the Maillard reaction, with asparagine as the primary amino acid precursor. The intake of large amounts of acrylamide has induced genotoxic and carcinogenic effects in hormone-sensitive tissues of animals. The enzime asparaginase is one of the most effective methods for lowering the formation of acrylamide in foods such as potatoes. However, the reported sensory outcomes for coffee have been unsatisfactory so far. This study aimed to produce coffees with reduced levels of acrylamide by treating them with asparaginase while retaining their original sensory and bioactive profiles. Three raw samples of Coffea arabica, including two specialty coffees, and one of Coffea canephora were treated with 1000, 2000, and 3000 ASNU of the enzyme. Asparagine and bioactive compounds (chlorogenic acids-CGA, caffeine, and trigonelline) were quantified in raw and roasted beans by HPLC and LC-MS, while the determination of acrylamide and volatile organic compounds was performed in roasted beans by CG-MS. Soluble solids, titratable acidity, and pH were also determined. Professional cupping by Q-graders and consumer sensory tests were also conducted. Results were analyzed by ANOVA-Fisher, MFA, PCA and Cluster analyses, with significance levels set at p ≤ 0.05. Steam treatment alone decreased acrylamide content by 18.4%, on average, and 6.1% in medium roasted arabica and canefora coffees. Average reductions of 32.5-56.0% in acrylamide formation were observed in medium roasted arabica beans when 1000-3000 ASNU were applied. In the canefora sample, 59.4-60.7% reductions were observed. However, steam treatment primarily caused 17.1-26.7% reduction of total CGA and lactones in medium roasted arabica samples and 13.9-22.0% in canefora sample, while changes in trigonelline, caffeine, and other evaluated chemical parameters, including the volatile profiles were minimal. Increasing enzyme loads slightly elevated acidity. The only sensory changes observed by Q-graders and or consumers in treated samples were a modest increase in acidity when 3000 ASNU was used in the sample with lower acidity, loss of mild off-notes in control samples, and increased perception of sensory descriptors. The former was selected given the similarity in chemical outcomes among beans treated with 2000 and 3000 ASNU loads.

A Mass Spectrometry Strategy for Protein Quantification Based on the Differential Alkylation of Cysteines Using Iodoacetamide and Acrylamide.

Mass spectrometry has become the most prominent yet evolving technology in quantitative proteomics. Today, a number of label-free and label-based approaches are available for the relative and absolute quantification of proteins and peptides. However, the label-based methods rely solely on the employment of stable isotopes, which are expensive and often limited in availability. Here we propose a label-based quantification strategy, where the mass difference is identified by the differential alkylation of cysteines using iodoacetamide and acrylamide. The alkylation reactions were performed under identical experimental conditions; therefore, the method can be easily integrated into standard proteomic workflows. Using high-resolution mass spectrometry, the feasibility of this approach was assessed with a set of tryptic peptides of human serum albumin. Several critical questions, such as the efficiency of labeling and the effect of the differential alkylation on the peptide retention and fragmentation, were addressed. The concentration of the quality control samples calculated against the calibration curves were within the ±20% acceptance range. It was also demonstrated that heavy labeled peptides exhibit a similar extraction recovery and matrix effect to light ones. Consequently, the approach presented here may be a viable and cost-effective alternative of stable isotope labeling strategies for the quantification of cysteine-containing proteins.

An exploratory study to assess the knowledge, attitudes and practices of Lebanese residents towards acrylamide.

INTRODUCTION: For years, heat treatment has been an essential method for ensuring mature food that meet the desired quality and safety characteristics. However, this process could lead to the formation of harmful compounds such as acrylamide. In this study we aimed to investigate the knowledge, attitudes and practices (KAPs) of the Lebanese population toward the potential risk associated with acrylamide. MATERIALS & METHODS: An online survey (n = 598) was conducted among residents in Lebanon aged 18 years and above. The survey was divided into five sections including participants' sociodemographic characteristics, knowledge, attitude and practice sections, and some questions related to consumer's preferences. RESULTS & DISCUSSION: The results showed that the majority of the participants had low food safety knowledge regarding acrylamide. Specifically, 82.9% of the consumers had no idea about the chemical, its formation, the foods with a high risk of acrylamide formation and the health risks associated with its exposure. Despite lack of knowledge, good domestic food practices (storage, pre-treatment) were noticed among participants. Moreover, the majority of consumers (> 80%) showed positive attitude towards proper acrylamide labeling. Participants with a bachelor's degree appeared to have a more positive attitude toward food safety compared to those with no qualifications (p<0.001). CONCLUSION: Despite the high consumption of acrylamide by the consumers in Lebanon through fried potatoes, bread, and coffee, the majority have no idea about acrylamide's presence in food, its sources and its adverse health effects. Raising awareness among the public, involving policy makers in addressing the issue of clear labeling and encouraging the adoption of alternative practices to reduce acrylamide are all crucial to protect consumers' health in Lebanon and promote healthier food consumption habits.

Acrylamide in food products and the role of electrochemical biosensors in its detection: a comprehensive review.

In this review, the mechanisms of acrylamide formation in food, along with aspects related to its toxicity and associated consumption risks, are investigated, highlighting the potential impact on human health. European regulations regarding acrylamide content in food products are also addressed, emphasizing the importance of monitoring and detecting this substance in nutrition, by public health protection measures. The primary objective of the research is to explore and analyze innovative methods for detecting acrylamide in food, with a particular focus on electrochemical biosensors. This research direction is motivated by the need to develop rapid, sensitive, and efficient monitoring techniques for this toxic compound in food products, considering the associated consumption risks. The research has revealed several significant results. Studies have shown that electrochemical biosensors based on hemoglobin exhibited increased sensitivity and low detection limits, capable of detecting very low concentrations of acrylamide in processed foods. Additionally, it has been found that the use of functionalized nanomaterials, such as carbon nanotubes and gold nanoparticles, has led to the improvement of electrochemical biosensor performance in acrylamide detection. The integration of these technological innovations and functionalization strategies has enhanced the sensitivity, specificity, and stability of biosensors in measuring acrylamides. Thus, the results of this research offer promising perspectives for the development of precise and efficient methods for monitoring acrylamides in food, contributing to the improvement of food quality control and the protection of consumer health.

Improving fried burger quality and modulating acrylamide formation by active coating containing Rosa canina L. extract nanoemulsions.

During the frying of foods, undesirable reactions such as protein denaturation, acrylamide formation, and so on occur in the product, which has confirmed carcinogenic effects. The use of antioxidants has been proposed as an effective solution to reduce the formation of these compounds during the process. The current study aimed to assess the impact of an edible coating holding within chia seed gum (CSG) and Rosa canina L. extract (RCE) nanoemulsions on the physicochemical properties, oil uptake, acrylamide formation, 5-hydroxymethyl-2-furfural (HMF) content, and sensory characteristics of beef-turkey burgers. The RCE-loaded nanoemulsions were prepared using the ultrasonic homogenization method, and different concentrations (i.e., 10%, 20%, and 40% w/w) were added to the CSG solutions; these active coatings were used to cover the burgers. CSG-based coatings, especially coatings containing the highest concentration of nanoemulsions (40%), caused a significant decrease in the oil uptake and moisture retention, acrylamide content, and HMF content of fried burgers. The texture of coated burgers was softer than that of uncoated samples; they also had a higher color brightness and a lower browning index. Field emission scanning electron microscopy analysis showed that RCE concentration less than 40% should be used in CSG coatings because it will cause minor cracks, which is an obvious possibility of failure of coating performance. Coating significantly (4-10 times) increased the antioxidant activity of burgers compared to the control. In conclusion, it is suggested to use the active coating produced in this study to improve fried burger quality and modulate acrylamide formation.

Reducing Acrylamide Formation Potential by Targeting Free Asparagine Accumulation in Seeds.

Acrylamide is a probable carcinogen in humans and is formed when reducing sugars react with free asparagine (Asn) during thermal processing of food. Although breeding for low reducing sugars worked well in potatoes, it is less successful in cereals. However, reducing free Asn in cereals has great potential for reducing acrylamide formation, despite the role that Asn plays in nitrogen transport and amino acid biosynthesis. In this perspective, we summarize the efforts aimed at reducing free Asn in cereal grains and discuss the potentials and challenges associated with targeting this essential amino acid, especially in a seed-specific manner.

Acrylamide in heat-treated carbohydrate-rich foods in Turkey.

This study was conducted to provide data on the amount of acrylamide (AA) in 270 heat-treated carbohydrate-rich foods in Turkey, determined by gas chromatography-mass spectrometry (GC-MS). A total of 270 samples were analysed and it was found that 85% of potato chips, 80% of biscuits, 85% of cakes, 80% of bread, 80% of roasted peanuts, 80% of roasted nuts and 85% of pretzels contained AA above the limit of quantification (LOQ). Analytical results indicated that 10 corn chips samples, 4 biscuits samples, all bread samples, all wheat bread samples, 2 dried bread samples and 1 pretzel sample contained AA levels above the benchmark levels of 150, 350, 50, 50, 300 and 300 µg/kg, respectively, as set by the European Commission.

A green-footprint approach for parallel multiclass analysis of contaminants in roasted coffee via LC-HRMS.

The development and validation of a simple, comprehensive, and environment-friendly procedure to determine pesticide residues, naturally occurring and processing contaminants in roasted coffee is presented. A solid-liquid extraction of pesticides and mycotoxins with ethyl acetate and the concurrent partition of acrylamide to an aqueous phase follows a parallel analytical strategy that requires a single analytical portion to determine contaminants that are typically analyzed by dedicated single residue methods. The partition rules the lipids out of the aqueous extract before an "in-tube" dispersive solid phase microextraction (dSPME) for acrylamide retention. This is followed by the elution with buffer prior to injection. This extract is independently introduced into the system front end followed by the injection of the compounds from the organic phase, yet all spotted in the same run. A novel liquid chromatography high-resolution mass spectrometry (LC-HRMS) method setup enables the quantification of 186 compounds at 10 µg/kg, 226 at 5 µg/kg, and the acrylamide at 200 µg/kg for a total of 414 molecules, with acceptable recoveries (70-120%) and precision (RSD < 20%) making this strategy significantly faster and cost-effective than the dedicated single residue methods. Even though the presence of chlorpyrifos, acrylamide, and ochratoxin A was confirmed on samples of different origins, the findings were below the limit of quantification. During the storage of raw coffee, no proof of masking of OTA was found; however, condensation with glucose was evidenced during thermal processing experiments with sucrose by using stable isotope labeling (SIL). No detected conjugates were found in roasted nor in commercial sugar-added torrefacto samples, an industrial processing usually carried out above the decomposition temperature of the disaccharide.

Dietary exposure to acrylamide among the Malaysian adult population.

This study aimed to estimate the Malaysian adult population's current dietary exposure and margin of exposure (MOE) to the carcinogenic processing contaminant, acrylamide. A total of 448 samples from 11 types of processed foods were collected randomly throughout Malaysia in the year 2015 and 2016. Acrylamide was analysed in samples using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) with a limit of detection (LOD) of 10 µg/kg and a limit of quantification (LOQ) of 25 µg/kg. The highest average level of acrylamide (772 ± 752 µg/kg) was found in potato crisps, followed by French fries (415 ± 914 µg/kg) and biscuits (245 ± 195 µg/kg). The total acrylamide exposure for the adult Malaysian was 0.229 and 1.77 µg/kg body weight per day for average and high consumers, respectively. The MOE were 741 and 1875 for the average consumer based on cancer and non-cancer effects of acrylamide, respectively. Meanwhile, for high consumers, the MOE is 96 for cancer and 243 for non-cancer effects. These findings indicate potential carcinogenic risks from acrylamide exposure among Malaysian adults, especially in Malay and other Bumiputra groups compared to Chinese, Indian, and other ethnic groups, while non-cancer effects appeared less concerning.

Evaluation of the efficiency of thermostable L-asparaginase from B. licheniformis UDS-5 for acrylamide mitigation during preparation of French fries.

A thermostable L-asparaginase was produced from Bacillus licheniformis UDS-5 (GenBank accession number, OP117154). The production conditions were optimized by the Plackett Burman method, followed by the Box Behnken method, where the enzyme production was enhanced up to fourfold. It secreted L-asparaginase optimally in the medium, pH 7, containing 0.5% (w/v) peptone, 1% (w/v) sodium chloride, 0.15% (w/v) beef extract, 0.15% (w/v) yeast extract, 3% (w/v) L-asparagine at 50 °C for 96 h. The enzyme, with a molecular weight of 85 kDa, was purified by ion exchange chromatography and size exclusion chromatography with better purification fold and percent yield. It displayed optimal catalysis at 70 °C in 20 mM Tris-Cl buffer, pH 8. The purified enzyme also exhibited significant salt tolerance too, making it a suitable candidate for the food application. The L-asparaginase was employed at different doses to evaluate its ability to mitigate acrylamide, while preparing French fries without any prior treatment. The salient attributes of B. licheniformis UDS-5 L-asparaginase, such as greater thermal stability, salt stability and acrylamide reduction in starchy foods, highlights its possible application in the food industry.

Determination of Acrylamide in Coffee, Cereals, Baby Food, Cocoa, Dry Pet Food, Potato Products, Vegetable Crisps, Biscuits, Tea, Nuts, and Spices by LC-MS/MS in a Single-Laboratory Validation: First Action 2023.01.

BACKGROUND: Acrylamide (AA) is a process contaminant naturally formed during the cooking of starchy food at high temperatures. Considering existing risks of misquantification inherent to the analysis of AA, an AOAC initiative raised the need for a consensus standard to determine AA in a broad variety of food. OBJECTIVE: A quantitative LC-MS/MS method for AA determination in food was validated in a single-laboratory study. Targeted performance requirements in terms of target matrixes, limit of quantification, recovery, and precision were as defined per Standard Method Performance Requirement (SMPR®) 2022.006. METHOD: The proposed method derives from EN 16618:2015 standard pending modifications brought to the (1) sample preparation (simplified, potentially automated); (2) scope of application (significantly extended); and (3) LC conditions (improved selectivity). Confirmatory detection of AA is conducted by LC-MS/MS in the Selected Reaction Monitoring mode (SRM), and isotopic dilution was applied for quantification approach using either 2,3,3-d3-acrylamide (d3-AA), or 13C3-2,3,3-d3-acrylamide (13C3-d3-AA) as labeled internal standard. RESULTS: A total of 16 laboratory samples from nine matrix categories were included in the validation process. A full validation was conducted on coffee (instant, roast), infant cereal, cocoa powder, pet food (croquettes), tea (green tea), spices (black pepper), and nuts (roasted almonds) with satisfactory performances both in terms of recovery (97-108%) and precision (RSDr and RSDiR <12%). The method applicability was further demonstrated through the analysis of quality control materials and reference materials including French fries, potato crisps, vegetable crisps, instant coffee, infant food, and biscuits (cookies), with accuracy values determined within a 94-107% range. CONCLUSIONS: The performances of the presented method are in agreement with the acceptance criteria stipulated in SMPR 2022.006. HIGHLIGHTS: The Expert Review Panel for acrylamide approved the present method as AOAC Official First Action 2023.01.

Identifying high-risk factors and mitigation strategies for acrylamide formation in air-fried lotus root chips: Impact of cooking parameters, including temperature, time, presoaking, and seasoning.

This study was conducted to identify high-risk factors and mitigation strategies for acrylamide formation in air-fried lotus root chips by studying the impact of various cooking parameters, including temperature, time, presoaking, and pre-seasoning treatments. The temperature and time had a surprisingly high impact on acrylamide formation. The chips prepared at high temperatures with longer cooking times contained an extremely high acrylamide content, reaching 12,786 ng/g (e.g., 170°C/19 min). A particularly concerning discovery was that the chips with extremely high acrylamide content (up to 17 times higher than the EU benchmark level for potato chips) did not appear overcooked or taste burnt. Higher cooking temperatures required shorter cooking times to properly cook lotus root chips for consumption. A high temperature with a short cooking time (170°C/13 min) greatly benefited acrylamide reduction compared to low temperature with a long cooking time (150°C/19 min). Presoaking in a 0.1% acetic acid solution and pre-seasoning with 1% salt reduced acrylamide levels by 61% and 47%, respectively. However, presoaking in water, vinegar solution, and citric acid solution did not significantly decrease the acrylamide content in the chips. Furthermore, some seasonings significantly increased acrylamide levels (up to 7.4 times higher). For the first time, these findings underscore the high risks associated with air-frying lotus root chips without considering these factors. This study also provides proper air-frying parameters and pretreatment strategies for minimizing acrylamide formation in air-fried lotus chips.

Adding pulse flours to cereal-based snacks and bakery products: An overview of free asparagine quantification methods and mitigation strategies of acrylamide formation in foods.

Thermal processing techniques can lead to the formation of heat-induced toxic substances. Acrylamide is one contaminant that has received much scientific attention in recent years, and it is formed essentially during the Maillard reaction when foods rich in carbohydrates, particularly reducing sugars (glucose, fructose), and certain free amino acids, especially asparagine (ASN), are processed at high temperatures (>120°C). The highly variable free ASN concentration in raw materials makes it challenging for food businesses to keep acrylamide content below the European Commission benchmark levels, while avoiding flavor, color, and texture impacts on their products. Free ASN concentrations in crops are affected by environment, genotype, and soil fertilization, which can also influence protein content and amino acid composition. This review aims to provide an overview of free ASN and acrylamide quantification methods and mitigation strategies for acrylamide formation in foods, focusing on adding pulse flours to cereal-based snacks and bakery products. Overall, this review emphasizes the importance of these mitigation strategies in minimizing acrylamide formation in plant-based products and ensuring safer and healthier food options.

Acrylamide increases and furanoic compounds decrease in plant-based meat alternatives during pan-frying.

Plant-based meat alternatives are gaining popularity as protein sources. However, pan-frying may lead to the formation of potentially harmful food contaminants. We investigated the formation of acrylamide and furanoic compounds in four different plant-based meat alternatives and two meat burger patties during pan-frying at 160 and 200 °C. The highest acrylamide contents (72. ± 7.7 and 69.2 ± 9.5 µg/kg, respectively) were found in soy flour- and sunflower-protein based patties fried at 200 °C. Unprepared pea and soy protein-based burger patties contained the highest furfural amounts (2832.8 ± 576.2 and 2683.0 ± 868.5 µg/kg, respectively). Furfuryl alcohol content was highest in soy flour-based patties and increased temperature-dependently up to 1120.9 ± 383.4 µg/kg. Based on the tolerable intake calculated by the EFSA Scientific Panel on Contaminants in the Food Chain, these amounts do not pose a health risk. Nevertheless, since plant-based novel food are being increasingly consumed, further investigations into the formation of food contaminants in novel processed foods are warranted.

Acrylamide in potato chips in Iran, health risk assessment and mitigation.

This study aimed to determine the acrylamide content in potato chips sold in Kermanshah, Iran and assess the potential health concerns associated with acrylamide exposure. HPLC-DAD was used to analyse 120 samples across 40 brands. The possible non-carcinogenic risk index for adults was below 1 for all 40 brands (100%), but for children it was only below 1 for 9 brands (22.5%) and above 1 for 31 brands (77.5%). Regarding the possible carcinogenic risk index, for adults only 1 out of 40 brands rated > 10-4, whereas for children all brands rated > 10-4. This shows that children's exposure to acrylamide through potato chips consumption in Kermanshah can be considered a risk on cancer and exposure of adults requires attention and monitoring. The best way to reduce acrylamide in potato chips and associated health risks is to improve the production process, especially temperature and time.

Biochemical Characterization of Thermostable Acrylamide Amidohydrolase from Aspergillus fumigatus with Potential Activity for Acrylamide Degradation in Various Food Products.

Acrylamide is the major by-product of the Maillard reactions in foods with the overheating processes of L-asparagine-rich foods with reducing sugars that usually allied with neurotoxicity and carcinogenicity. Several approaches have been used to prevent the formation of acrylamide, however, degrading the already formed acrylamide in foods remains unequivocal. Acrylamide hydrolyzing enzyme "amidohydrolase" is one of the most promising enzymes for acrylamide degradation in foods. So, amidohydrolase "amidase" from thermotolerant Aspergillus fumigatus EFBL was purified to their electrophoretic homogeneity by gel-filtration and ion-exchange chromatography, with overall purification folds 2.8 and yield 9.43%. The apparent molecular subunit structure of the purified A. fumigatus amidase was 50 kDa, with highest activity at reaction temperature of 40 °C and pH of 7.5 The enzyme displayed a significant thermal stability as revealed from the value of T1/2 (13.37 h), and thermal denaturation rate (Kr 0.832 × 10-3 min) at 50 °C, with metalloproteinic identity. The purified enzyme had a significant activity for acrylamide degradation in various food products such as meat, cookies, potato chips, and bread as revealed from the HPLC analysis and LC-MS analysis. So, with the purified amidase, the acrylamide in the food products was degraded by about 95% to acrylic acid, ensuring the possibility of using this enzyme in abolishing the toxic acrylamide in the foods products. This is the first report exploring the potency of A. fumigatus amidase for an actual degradation of acrylamide in foods efficiently. Further biochemical analyses are ongoing to assess the affinity of this enzyme for selective hydrolyses of acrylamide in foods, without affecting the beneficial stereochemical related compounds.

Formulation and Processing Strategies to Reduce Acrylamide in Thermally Processed Cereal-Based Foods.

Acrylamide, a thermal process contaminant, is generated in carbohydrate-rich foods processed at high temperatures (above 120 °C). Since acrylamide indicates a human health concern, the acrylamide contents of various foods and the dietary exposure of the population to acrylamide are very well investigated. Commonly consumed foods in the daily diet of individuals such as bakery products, potato products and coffee are major dietary sources of acrylamide. In recent years, dietary exposure levels of the population and mitigation measures for reducing acrylamide in different food products have gained importance to decrease the public's exposure to acrylamide. Since the complete elimination of acrylamide in foods is not possible, various mitigation measures to reduce acrylamide to levels as low as reasonably achievable have been developed and applied in the food industry. Mitigation strategies should be applied according to the different product categories during agricultural production, formulation, processing and final consumer preparation stages. The aim of this review is to evaluate formulation and processing strategies to reduce acrylamide in various cereal-based food products and to discuss the applicability of mitigation measures in the food industry by taking into consideration the organoleptic properties, nutritional value, cost and regulations in the light of current knowledge.

Characterizing the formation of process contaminants during coffee roasting by multivariate statistical analysis.

Coffee is a relevant source of dietary exposure for neoformed furan, alkyl furans and acrylamide. In this study, different statistical methods (hierarchical cluster analysis, correlation analysis, partial least squares regression analysis) were used for characterizing the formation of these process contaminants in green coffee beans roasted under the same standardized conditions. The results displayed a strong correlation between sucrose levels and furans in relation to the other sugars analyzed, while acrylamide formation was strongly related to the free asparagine. The data suggest that a sufficiently large amino acid pool in green coffee favors Maillard-induced acrylamide formation from asparagine, while reactions amongst the carbonyl-containing sugar fragmentation products leading to furan formation are suppressed. If the pool of free amino acids is small, it is depleted faster during roasting, thus favoring the formation of furans by caramelization, basically a sugar degradation process in which reactive carbonyl substances are generated and react together.