Synthesis and Functionalization of Biodegradable Second Harmonic Generation Nanoprobes for Cell Targeting.

Optical imaging technologies and cell targeting have played a major role in detecting and treating diseases such as cancer. Bioharmonophores are optical imaging nanoprobes composed of biodegradable polymer-encapsulated, self-assembling triphenylalanine peptides. They produce a strong second harmonic generation (SHG) signal, a non-linear optical process in which two photons directed at a non-centrosymmetric medium combine to form a new photon with twice the energy. Bioharmonophores demonstrate superior optical properties compared to fluorescent probes and, unlike previously developed inorganic SHG nanoprobes, are both biocompatible and biodegradable. Here, we present a protocol providing five detailed procedures that describe (1) synthesis of bioharmonophores; (2) embedding and imaging of the synthesized SHG nanoprobes in polyacrylamide gel; (3) functionalization of bioharmonophores with thiol-containing polyethyleneglycol; (4) subsequent click chemistry to target cancer cells; and (5) imaging of functionalized bioharmonophores endocytosed by cancer cells using two-photon microscopy. Bioharmonophores hold great potential as clinical contrast agents due to their optical features and could be used in the future as an innovative approach to cancer treatment using targeted high-resolution optical imaging. © 2024 The Author(s). Current Protocols published by Wiley Periodicals LLC. Basic Protocol 1: Synthesis of bioharmonophores Basic Protocol 2: Imaging of bioharmonophores in polyacrylamide gel Basic Protocol 3: Functionalization of bioharmonophores with thiol-PEG Basic Protocol 4: Functionalization of thiol-PEGylated bioharmonophores with peptides Basic Protocol 5: Targeting of cancer cells with functionalized bioharmonophores.

Synthesis of grafted bromoisobutyryl esterified starch using electron transfer atom transfer radical polymerization method with high-performance adhesion and film properties.

Nowadays, few investigations on the process parameters of grafted starch synthesized using electron transfer atom transfer radical polymerization (ARGET ATRP) and its applications in warp sizing and paper-making are presented. Therefore, this study aimed to survey the appropriate process parameters of bromoisobutyryl esterified starch-g-poly(acrylic acid) (BBES-g-PAA) synthesized by the ARGET ATRP, and also aimed to provide a new biobased BBES-g-PAA adhesive. The appropriate synthesis process parameters were 1.2, 0.32, and 0.6 in the molar ratios of vitamin C, CuBr2, and pentamethyldivinyltriamine to BBES, respectively, at 40 °C for 5 h. The BBES-g-PAA samples with a grafting ratio range of 4.63-14.14 % exhibited bonding forces of 57.8-64.6 N to wool fibers [55.5 N (BBES) and 53.8 N (ATS)], and their films showed breaking elongations of 3.29-3.80 % [2.74 % (BBES) and 2.49 % (ATS)] and tensile strengths of 29.1-25.4 MPa [30.4 MPa (BBES) and 34.7 MPa (ATS)]. Compared with BBES, significantly increased bonding forces and film elongations, and decreased film strengths for the BBES-g-PAA samples with grafting ratios ≥10.54 % were displayed (p < 0.05). The time (100-42 s) taken for the BBES-g-PAA films was significantly shorter than that of ATS (246 s) and BBES (196 s) films (p < 0.05), corresponding to better desizability.

Chitosan-PNIPAM Thermogel Associated with Hydrogel Microspheres as a Smart Formulation for MSC Injection.

Regenerative medicine based on cell therapy has emerged as a promising approach for the treatment of various medical conditions. However, the success of cell therapy heavily relies on the development of suitable injectable hydrogels that can encapsulate cells and provide a conducive environment for their survival, proliferation, and tissue regeneration. Herein, we address the medical need for cyto- and biocompatible injectable hydrogels by reporting on the synthesis of a hydrogel-forming thermosensitive copolymer. The copolymer was synthesized by grafting poly(N-isopropylacrylamide-co-carboxymethyl acrylate) (PNIPAM-COOH) onto chitosan through amide coupling. This chemical modification resulted in the formation of hydrogels that exhibit a sol-gel transition with an onset at approximately 27 °C, making them ideal for use in injectable applications. The hydrogels supported the survival and proliferation of cells for several days, which is critical for cell encapsulation. Furthermore, the study evaluates the addition of collagen/chitosan hybrid microspheres to support the adhesion of mesenchymal stem cells within the hydrogels. Altogether, these results demonstrate the potential of the PNIPAM-chitosan thermogel for cell encapsulation and its possible applications in regenerative medicine.

Block Copolymers of Polyolefins with Polyacrylates: Analyzing and Improving the Blocking Efficiencies Using MILRad/ATRP Approach.

Despite their industrial ubiquity, polyolefin-polyacrylate block copolymers are challenging to synthesize due to the distinct polymerization pathways necessary for respective blocks. This study utilizes MILRad, metal-organic insertion light-initiated radical polymerization, to synthesize polyolefin-b-poly(methyl acrylate) copolymer by combining palladium-catalyzed insertion-coordination polymerization and atom transfer radical polymerization (ATRP). Brookhart-type Pd complexes used for the living polymerization of olefins are homolytically cleaved by blue-light irradiation, generating polyolefin-based macroradicals, which are trapped with functional nitroxide derivatives forming ATRP macroinitiators. ATRP in the presence of Cu(0), that is, supplemental activators and reducing agents , is used to polymerize methyl acrylate. An increase in the functionalization efficiency of up to 71% is demonstrated in this study by modifying the light source and optimizing the radical trapping condition. Regardless of the radical trapping efficiency, essentially quantitative chain extension of polyolefin-Br macroinitiator with acrylates is consistently demonstrated, indicating successful second block formation.

Synthesis, Characterization, and Investigation of Doxorubicin Drug Release Properties of Poly(acrylamide-co-acrylic Acid/Maleic Acid)-Hydroxyapatite Composite Hydrogel.

BACKGROUND: Hydroxyapatite and its derivatives have been used for a lot of applications. One of them is drug release studies. Due to its low adhesion strength and lack of the strength and durability required for load-carrying applications, there is a need to improve the properties of hydroxyapatite. For this aim, the most important factors are increasing pH sensitivity and preventing coagulation. Mixing it with multifunctional polymers is the best solution. OBJECTIVES: The main objectives are: 1- preparing poly(acrylamide-co-acrylic acid/maleic acid)- hydroxyapatite (PAm-co-PAA/PMA-HApt), 2- assessment of (PAm-co-PAA/PMA-HApt) and dox-loaded poly(acrylamide-co-acrylic acid/maleic acid) (Dox-(PAm-co-PAA/PMA-HApt)) composite hydrogels, and 3- elucidating the difference in behavior of drug release studies between hydroxyapatite (HApt) and poly(acrylamide-co-acrylic acid/maleic acid) composite hydrogels. METHODS: A composite of PAm-co-PAA/PMA-HApt was prepared by direct polymerization of acrylamide-co-acrylic acid/maleic acid in a suspension of HApt. The drug loading and release features of PAm-co-PAA/PMA-HApt and HApt were then investigated for doxorubicin (dox) release. Using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TG/DTA), this unique composite hydrogel has been physicochemically investigated. Also, a colorimetric assay was used to assess the in vitro biocompatible support and anticancer activity of HApt and the newly developed composite hydrogel XTT (2,3-Bis-(2-Methoxy-4-Nitro-5-Sulfophenyl)-2H-Tetrazolium-5-Carboxanilide) assay. RESULTS: According to the results of drug release studies of this new material, it is pH sensitive, and PAm-co-PAA/PMA-HApt demonstrated a faster release than HApt at 37°C in the acidic solution of pH 4.5 than in the neutral solution of pH 7.4. The XTT assay outcomes also demonstrated the biocompatibility of PAm-co-PAA/PMA-HApt and HApt and the cytotoxic effect of dox-loaded PAm-co-PAA/PMA-HApt. CONCLUSION: It should be inferred that the drug release profile was improved at pH 4.5 by the newly produced pH-sensitive composite hydrogel.

Temperature Responsive Polymer Conjugate Prepared by "Grafting from" Proteins toward the Adsorption and Removal of Uremic Toxin.

In this study, temperature-responsive polymer-protein conjugate was synthesized using a "grafting from" concept by introducing a chain transfer agent (CTA) into bovine serum albumin (BSA). The BSA-CTA was used as a starting point for poly(N-isopropylacrylamide) (PNIPAAm) through reversible addition-fragmentation chain transfer polymerization. The research investigations suggest that the thermally responsive behavior of PNIPAAm was controlled by the monomer ratio to CTA, as well as the amount of CTA introduced to BSA. The study further synthesized the human serum albumin (HSA)-PNIPAAm conjugate, taking the advantage that HSA can specifically adsorb indoxyl sulfate (IS) as a uremic toxin. The HSA-PNIPAAm conjugate could capture IS and decreased the concentration by about 40% by thermal precipitation. It was also revealed that the protein activity was not impaired by the conjugation with PNIPAAm. The proposed strategy is promising in not only removal of uremic toxins but also enrichment of biomarkers for early diagnostic applications.

Surface Force Measurements of Mussel-Inspired Pressure-Sensitive Adhesives.

Translating fundamental studies of marine mussel adhesion into practical mussel-inspired wet adhesives remains an important technological challenge. To adhere, mussels secrete adhesive proteins rich in the catecholic amino acid 3,4-dihydroxyphenylalanine (Dopa) and positively charged lysine. Consequently, numerous synthetic adhesives incorporating catecholic and cationic functionalities have been designed. However, despite widespread research, uncertainties remain about the optimal design of synthetic mussel-inspired adhesives. Here, we present a study of the adhesion of mussel-inspired pressure-sensitive adhesives. We explore the effects of catechol content, molecular architecture, and solvent quality on pressure-sensitive adhesive (PSA) adhesion and cohesion measured in a surface forces apparatus. Our findings demonstrate that the influence of catechol content depends on the choice of solvent and that adhesive performance is dictated by film composition rather than molecular architecture. Our results also highlight the importance of electrostatic and hydrophobic interactions for adhesion and cohesion in aqueous environments. Together, our findings contribute to an improved understanding of the interplay between materials chemistry, environmental conditions, and adhesive performance to facilitate the design of bioinspired wet adhesives.

Chemical and Mechanical Characterization of Licorice Root and Palm Leaf Waste Incorporated into Poly(urethane-acrylate) (PUA).

A poly(urethane-acrylate) polymer (PUA) was synthesized, and a sufficiently high molecular weight starting from urethane-acrylate oligomer (UAO) was obtained. PUA was then loaded with two types of powdered ligno-cellulosic waste, namely from licorice root and palm leaf, in amounts of 1, 5 and 10%, and the obtained composites were chemically and mechanically characterized. FTIR analysis of final PUA synthesized used for the composite production confirmed the new bonds formed during the polymerization process. The degradation temperatures of the two types of waste used were in line with what observed in most common natural fibers with an onset at 270 °C for licorice waste, and at 290 °C for palm leaf one. The former was more abundant in cellulose (44% vs. 12% lignin), whilst the latter was richer in lignin (30% vs. 26% cellulose). In the composites, only a limited reduction of degradation temperature was observed for palm leaf waste addition and some dispersion issues are observed for licorice root, leading to fluctuating results. Tensile performance of the composites indicates some reduction with respect to the pure polymer in terms of tensile strength, though stabilizing between data with 5 and 10% filler. In contrast, Shore A hardness of both composites slightly increases with higher filler content, while in stiffness-driven applications licorice-based composites showed potential due to an increase up to 50% compared to neat PUA. In general terms, the fracture surfaces tend to become rougher with filler introduction, which indicates the need for optimizing interfacial adhesion.

Ionic Hydrogels Based Wearable Sensors to Monitor the Solar Radiation Dose for Vitamin D Production and Sunburn Prevention.

Wearable solar radiation sensors based on ionic hydrogels are facilely prepared to simultaneously monitor the radiation dose for the production of vitamin D and the prevention of sunburn. Tetramethylethylenediamine (TEMED) is neutralized with acrylic acid (AA) to obtain tetramethylethylenediamine acrylate (TEMEDA), which is further polymerized with acrylamide by a free radical reaction. By simply adding MB or NR during the polymerization, the final obtained ionic hydrogels can indicate solar radiation. Due to the extent of discoloration, the discoloration speed of MB and NR is correlated to the radiation dose. This wearable sensor can indicate the solar radiation dose required by the human body to synthesize vitamin D through the discoloration of the ionized hydrogel of MB, whereas those with NR are able to illustrate the threshold of radiation dose that causes potential skin hurt. Therefore, the benefit and drawback of solar radiation can be well balanced by optimizing the exposure time to solar irradiation. In addition, polyurethane cross-linked with a thermoresponsive coating is used as band for this wearable sensor. Due to the hydrophilicity below its transition temperature, the cross-linked band possesses the easy cleaning capability of stains after the daily wear. Such type of wearable sensor can be broadly used for monitoring the solar radiation, especially in outdoor activities.

Tough, Resilient, Adhesive, and Anti-Freezing Hydrogels Cross-Linked with a Macromolecular Cross-Linker for Wearable Strain Sensors.

Ideal conductive hydrogels for flexible, wearable strain sensors should be tough, highly resilient, adhesive, and anti-freezing. However, such hydrogels are difficult to design. Herein, a multifunctional macromolecular cross-linker (MC) based on poly(hydroxyethyl-l-glutamine) was designed and used to synthesize the hydrogels. Cross-linking with the MC leads to a reduced inhomogeneity of the gel network. Therefore, the mechanical properties of the gels are significantly improved compared with the ordinary hydrogels cross-linked with the conventional cross-linker N,N-methylenebisacrylamide (BIS). The MC-cross-linked gels also exhibit high resilience. At the same time, replacing BIS with MC significantly improves the adhesive properties of the gel, which is attributed to the introduction of a large amount of adhesive groups with the MC. The gels can stick to various substrates including skin. The good tissue adhesiveness of the gel allows it to stick to skin by itself without using any straps or adhesive tapes when used as a flexible wearable strain sensor. Both large and subtle human movements were successfully monitored using the sensor. The signals are highly stable and reliable, thanks to the high resilience of the gel. The introduction of the polar groups also improved dramatically the anti-freezing properties of the gels. Even at -20 °C, the gels still remained highly flexible and stretchable, therefore allowing the gel-based sensor to work at sub-zero temperatures. The excellent toughness, resilience, tissue-adhesiveness, and anti-freezing properties of the gel make it a good choice for a flexible wearable sensor.

Dual-initiating and living frustrated Lewis pairs: expeditious synthesis of biobased thermoplastic elastomers.

Biobased poly(γ-methyl-α-methylene-γ-butyrolactone) (PMMBL), an acrylic polymer bearing a cyclic lactone ring, has attracted increasing interest because it not only is biorenewable but also exhibits superior properties to petroleum-based linear analog poly(methyl methacrylate) (PMMA). However, such property enhancement has been limited to resistance to heat and solvent, and mechanically both types of polymers are equally brittle. Here we report the expeditious synthesis of well-defined PMMBL-based ABA tri-block copolymers (tri-BCPs)-enabled by dual-initiating and living frustrated Lewis pairs (FLPs)-which are thermoplastic elastomers showing much superior mechanical properties, especially at high working temperatures (80-130 °C), to those of PMMA-based tri-BCPs. The FLPs consist of a bulky organoaluminum Lewis acid and a series of newly designed bis(imino)phosphine superbases bridged by an alkyl linker, which promote living polymerization of MMBL. Uniquely, such bisphosphine superbases initiate the chain growth from both P-sites concurrently, enabling the accelerated synthesis of tri-BCPs in a one-pot, two-step procedure. The results from mechanistic studies, including the single crystal structure of the dually initiated active species, detailed polymerizations, and kinetic studies confirm the livingness of the polymerization and support the proposed polymerization mechanism featuring the dual initiation and subsequent chain growth from both P-sites of the superbase di-initiator.

A Novel N-Halamine Biocidal Nanofibrous Membrane for Chlorine Rechargeable Rapid Water Disinfection Applications.

Disinfecting pathogenic contaminated water rapidly and effectively on sites is one of the critical challenges at point-of-use (POU) situations. Currently available technologies are still suffering from irreversible depletion of disinfectants, generation of toxic by-products, and potential biofouling problems. Herein, we developed a chlorine rechargeable biocidal nanofibrous membrane, poly(acrylonitrile-co-5-methyl-5-(4'-vinylphenyl)imidazolidine-2,4-dione) (P(AN-VAPH)), via a combination of a free radical copolymerization reaction and electrospun technology. The copolymer exhibits good electrospinnability and desirable mechanical properties. Also, the 5-methyl-5-(4'-vinylphenyl)imidazolidine-2,4-dione (VAPH) moieties containing unique hydantoin structures are able to be chlorinated and converted to halamine structures, enabling the P(AN-VAPH) nanofibrous membrane with rapid and durable biocidal activity. The chlorinated P(AN-VAPH) nanofibrous membranes showed intriguing features of unique 3D morphological structures with large specific surface area, good mechanical performance, rechargeable chlorination capacity (>5000 ppm), long-term durability, and desirable biocidal activity against both bacteria and viruses (>99.9999% within 2 min of contact). With these attributes, the chlorinated P(AN-VAPH) membranes demonstrated promising disinfecting efficiency against concentrated bacteria-contaminated water during direct filtration applications with superior killing capacity and high flowing flux (5000 L m-2 h-1).

Spatio-temporal control over destabilization of Pickering emulsions stabilized by light-sensitive dextran-based nanoparticles.

The implementation of light-sensitive Pickering emulsions with spatio-temporal responsiveness in advanced applications like drug-delivery, colloidal or reaction engineering would open new avenues. However, curiously, light-sensitive Pickering emulsions are barely studied in the literature and their biocompatibility and/or degradability scarcely addressed. Thus, their development remains a major challenge. As an original strategy, we synthesized light-sensitive nanoparticles based on biocompatible Poly(NitroBenzylAcrylate) grafted dextran (Dex-g-PNBA) to stabilize O/W Pickering emulsions. The produced emulsions were stable in time and could undergo time and space-controlled destabilization under light stimulus. Irradiation time and alkaline pH-control of the aqueous phase were proved to be the actual key drivers of destabilization. As the nanoparticles themselves were photolyzed under light stimulus, possible harmful effects linked to accumulation of nanomaterials should be avoided. In addition to UV light (365 nm), visible light (405 nm) was successfully used for the spatio-temporal destabilization of the emulsions, offering perspectives for life science applications.

Injectable Supramolecular Hydrogel for Locoregional Immune Checkpoint Blockade and Enhanced Cancer Chemo-Immunotherapy.

Immunotherapy has revolutionized the therapeutic modalities of cancer treatment but is severely limited by a low objective response rate and the risk of immune-related side effects. Herein, an injectable supramolecular hydrogel is developed for local delivery of the DPPA-1 peptide (a d-peptide antagonist with a high binding affinity to programmed cell death-ligand 1 (PD-L1)) and doxorubicin (DOX). On the one hand, DOX could kill tumor cells directly and also induce immunogenic cell death to provoke the antitumor immune response. On the other hand, the DPPA-1 peptide could locoregionally block the PD-1/PD-L1 pathway to potentiate T-cell-mediated immune responses and minimize side effects. Eventually, by local injection of this supramolecular hydrogel, the synergistic cancer therapeutic effect was evaluated, showing promise in improving the objective response rate of immunotherapy and minimizing its systemic side effects.

Correlation between Protonation of Tailor-Made Polypiperazines and Endosomal Escape for Cytosolic Protein Delivery.

Responsive polymers, which become protonated at decreasing pH, are considered a milestone in the development of synthetic cell entry vectors. Exact correlations between their properties and their ability to escape the endosome, however, often remain elusive due to hydrophobic interactions or limitations in the design of water-soluble materials with suitable basicity. Here, we present a series of well-defined, hydrophilic polypiperazines, where systematic variation of the amino moiety facilitates an unprecedented fine-tuning of the basicity or pKa value within the physiologically relevant range (pH 6-7.4). Coincubation of HEK 293T cells with various probes, including small fluorophores or functioning proteins, revealed a rapid increase of endosomal release for polymers with pKa values above 6.5 or 7 in serum-free or serum-containing media, respectively. Similarly, cytotoxic effects became severe at increased pKa values (>7). Although the window for effective transport appears narrow, the discovered correlations offer a principal guideline for the design of effective polymers for endosomal escape.

Agarose Stearate-Carbomer940 as Stabilizer and Rheology Modifier for Surfactant-Free Cosmetic Formulations.

Some commonly used surfactants in cosmetic products raise concerns due to their skin-irritating effects and environmental contamination. Multifunctional, high-performance polymers are good alternatives to overcome these problems. In this study, agarose stearate (AS) with emulsifying, thickening, and gel properties was synthesized. Surfactant-free cosmetic formulations were successfully prepared from AS and carbomer940 (CBM940) mixed systems. The correlation of rheological parameter with skin feeling was determined to study the usability of the mixed systems in cosmetics. Based on rheological analysis, the surfactant-free cosmetic cream (SFC) stabilized by AS-carbomer940 showed shear-thinning behavior and strongly synergistic action. The SFC exhibited a gel-like behavior and had rheological properties similar to commercial cosmetic creams. Scanning electron microscope images proved that the AS-CBM940 network played an important role in SFC's stability. Oil content could reinforce the elastic characteristics of the AS-CBM940 matrix. The SFCs showed a good appearance and sensation during and after rubbing into skin. The knowledge gained from this study may be useful for designing surfactant-free cosmetic cream with rheological properties that can be tailored for particular commercial cosmetic applications. They may also be useful for producing medicine products with highly viscous or gel-like textures, such as some ointments and wound dressings.

New Tool for Rapid and Accurate Detection of Interleukin-2 and Soluble Interleukin-2 Receptor α in Cancer Diagnosis Using a Bioresponsive Microgel and Multivalent Protein Binding.

Interleukin-2 (IL-2) and its α receptor in soluble form (sIL-2Rα) are considered biomarkers for cancers and immune-related diseases. Enzyme-linked immunosorbent assay is the most common method used to evaluate biomarkers in clinical practice; it is precise but time-consuming and involves complicated procedures. Here, we have developed a rapid yet accurate modality for cancer diagnosis that enables on-site evaluation of cancer markers, that is, IL-2 and sIL-2Rα, without complicated pretreatment of cancer patient-derived blood samples. Surface plasmon resonance and bioresponsive microgels conjugated with IL-2 receptors, that is, IL-2Rß and IL-2Rγ, were utilized to measure IL-2 and sIL-2Rα levels via multivalent protein binding (MPB) between the ligands and their receptors. Our results showed that this novel method enables us to perform cancer diagnosis with a 1000-fold dilution of serum in 10 min. The advantage of MPB-based cancer diagnosis originates from its great selectivity for a target molecule and tolerance to a myriad of nonspecific substances in serum, which allows on-site clinical evaluation. Importantly, our finding implies that MPB-based cancer diagnosis provides a new paradigm not only for improving cancer treatment but also for evaluating a target molecule in unpurified and complex solutions such as blood.

A multiple environment-sensitive prodrug nanomicelle strategy based on chitosan graftomer for enhanced tumor therapy of gambogic acid.

A novel multiple environment-sensitive polymeric prodrug of gambogic acid (GA) based on chitosan graftomer was fabricated for cancer treatment. Folic acid-chitosan conjugates was complexed with thermosensitive amine terminated poly-N-isopropylacrylamide (NH2-PNIPAM) to develop FA-CSPN. Gambogic acid was conjugated with the graftomer via esterification to achieve high drug-loading capacity and controlled drug release. The resulting amphiphilic prodrug, O-(gambogic acid)-N-(folic acid)-N'-(NH2-PNIPAM) chitosan graftomer (GFCP), could self-assemble into micelles. As expected, the micelles were stable and biocompatible, featuring pH-, esterase- and temperature-dependent manner of drug release. Moreover, the anticancer effect studies of GFCP micelles were performed using a tumor-bearing mouse model and cellular assays (tumor cell uptake assay, cytotoxicity and tumor-sphere penetration). Collectively, GFCP micelles show both potential in vivo and in vitro in improving the anticancer effectiveness of GA owing to high loading capacity, targeted tumor accumulation, and multiple tumor microenvironmental responsiveness.

Synthesis and antifouling performance of tadpole-shaped poly(N-hydroxyethylacrylamide) coatings.

Linear poly(N-hydroxyethylacrylamide) (PHEAA) is regarded as one of the most promising antifouling materials because of its excellent antifouling properties and good hemocompatibility. However, the antifouling performance of topological PHEAAs remains largely unknown. Herein, the preparation of antifouling surfaces based on a tadpole-shaped PHEAA coating is reported for the first time, and how the tadpole-shaped PHEAA architecture affects antifouling performance is investigated. It is shown that the tadpole-shaped PHEAA-modified surfaces exhibit better antifouling performance than linear copolymer precursor-modified surfaces with identical molar masses and chemical compositions. This may be primarily attributed to the presence of cyclic PHEAA head chain segments in the tadpole-shaped PHEAA copolymer, and the absence of interchain entanglements can facilitate the formation of smoother and densely packed grafts, which result in better antifouling properties.

Photodegradable Polyacrylamide Gels for Dynamic Control of Cell Functions.

Cross-linked polyacrylamide hydrogels are commonly used in biotechnology and cell culture applications due to advantageous properties, such as the precise control of material stiffness and the attachment of cell adhesive ligands. However, the chemical and physical properties of polyacrylamide gels cannot be altered once fabricated. Here, we develop a photodegradable polyacrylamide gel system that allows for a dynamic control of polyacrylamide gel stiffness with exposure to light. Photodegradable polyacrylamide hydrogel networks are produced by copolymerizing acrylamide and a photocleavable ortho-nitrobenzyl (o-NB) bis-acrylate cross-linker. When the hydrogels are exposed to light, the o-NB cross-links cleave and the stiffness of the photodegradable polyacrylamide gels decreases. Further examination of the effect of dynamic stiffness changes on cell behavior reveals that in situ softening of the culture substrate leads to changes in cell behavior that are not observed when cells are cultured on presoftened gels, indicating that both dynamic and static mechanical environments influence cell fate. Notably, we observe significant changes in nuclear localization of YAP and cytoskeletal organization after in situ softening; these changes further depend on the type and concentration of cell adhesive proteins attached to the gel surface. By incorporating the simplicity and well-established protocols of standard polyacrylamide gel fabrication with the dynamic control of photodegradable systems, we can enhance the capability of polyacrylamide gels, thereby enabling cell biologists and engineers to study more complex cellular behaviors that were previously inaccessible using regular polyacrylamide gels.