Degradation of gaseous hydrocarbons in aerated stirred bioreactors inoculated with Rhodococcus erythropolis: Effect of the carbon source and SIFT-MS method development.

The study of microbial hydrocarbons removal is of great importance for the development of future bioremediation strategies. In this study, we evaluated the removal of a gaseous mixture containing toluene, m-xylene, ethylbenzene, cyclohexane, butane, pentane, hexane and heptane in aerated stirred bioreactors inoculated with Rhodococcus erythropolis and operated under non-sterile conditions. For the real-time measurement of hydrocarbons, a novel systematic approach was implemented using Selected-Ion Flow Tube Mass Spectrometry (SIFT-MS). The effect of the carbon source (∼9.5 ppmv) on (i) the bioreactors' performance (BR1: dosed with only cyclohexane as a single hydrocarbon versus BR2: dosed with a mixture of the 8 hydrocarbons) and (ii) the evolution of microbial communities over time were investigated. The results showed that cyclohexane reached a maximum removal efficiency (RE) of 53% ± 4% in BR1. In BR2, almost complete removal of toluene, m-xylene and ethylbenzene, being the most water-soluble and easy-to-degrade carbon sources, was observed. REs below 32% were obtained for the remaining compounds. By exposing the microbial consortium to only the five most recalcitrant hydrocarbons, REs between 45% ± 5% and 98% ± 1% were reached. In addition, we observed that airborne microorganisms populated the bioreactors and that the type of carbon source influenced the microbial communities developed. The abundance of species belonging to the genus Rhodococcus was below 10% in all bioreactors at the end of the experiments. This work provides fundamental insights to understand the complex behavior of gaseous hydrocarbon mixtures in bioreactors, along with a systematic approach for the development of SIFT-MS methods.

Sulfide-carbonate-mineralized functional bacterial consortium for cadmium removal in flue gas.

Sulfide-carbonate-mineralized functional bacterial consortium was constructed for flue gas cadmium biomineralization. A membrane biofilm reactor (MBfR) using the bacterial consortium containing sulfate reducing bacteria (SRB) and denitrifying bacteria (DNB) was investigated for flue gas cadmium (Cd) removal. Cadmium removal efficiency achieved 90%. The bacterial consortium containing Citrobacter, Desulfocurvus and Stappia were dominated for cadmium resistance-nitrate-sulfate reduction. Under flue gas cadmium stress, ten cadmium resistance genes (czcA, czcB, czcC, czcD, cadA, cadB, cadC, cueR, copZ, zntA), and seven genes related to sulfate reduction, increased in abundance; whereas others, nine genes related to denitrification, decreased, indicating that cadmium stress was advantageous to sulfate reduction in the competition with denitrification. A bacterial consortium could capable of simultaneously cadmium resistance, sulfate reduction and denitrification. Microbial induced carbonate precipitation (MICP) and biological adsorption process would gradually yield to sulfide-mineralized process. Flue gas cadmium could transform to Cd-EPS, cadmium carbonate (CdCO3) and cadmium sulfide (CdS) bioprecipitate. The functional bacterial consortium was an efficient and eco-friendly bifunctional bacterial consortium for sulfide-carbonate-mineralized of cadmium. This provides a green and low-carbon advanced treatment technology using sulfide-carbonate-mineralized functional bacterial consortium for the removal of cadmium or other hazardous heavy metal contaminants in flue gas.

How tree traits modulate tree methane fluxes: A review.

Trees can play different roles in the regulation of fluxes of methane (CH4), a greenhouse gas with a warming potential 83 times greater than that of carbon dioxide. Forest soils have the greatest potential for methane uptake compared to other land uses. In addition to their influence on soil CH4 fluxes, trees can act directly as a source or sink of CH4, by transporting CH4 produced in the soil and harbouring the key microorganisms involved in CH4 production and consumption (methanogens and methanotrophs). Tree CH4 fluxes can vary between species characterized by different traits that influence transport and modify the availability of CH4 reaction substrates as well as the habitat for methanogens and methanotrophs. Despite their important role in modulating CH4 fluxes from forest ecosystems, the identity and role of tree traits influencing these fluxes are poorly consolidated in the literature. The objectives of this paper are to 1) Review the functional traits of trees associated with their role in the regulation of CH4 emissions; 2) Assess the importance of inter-specific variability in CH4 fluxes via a global analysis of tree methane fluxes in the literature. Our review highlights that differences in CH4 fluxes between tree species and individuals can be explained by a diversity of traits influencing CH4 transport and microbial production of CH4 such as wood density and secondary metabolites. We propose a functional classification for trees based on the key traits associated with a function in CH4 emissions. We identified the fast-growing species with low wood density, species adapted to flood and species vulnerable to rot as functional groups which can be net sources of CH4 in conditions favorable to CH4 production. The global analysis further demonstrated the importance of taxonomy, with other factors such as land type and season in explaining variability in tree CH4 fluxes.

Effect of toluene on siloxane biodegradation and microbial communities in biofilters.

The removal of volatile methyl siloxanes (VMS) from landfill biogas is crucial for clean energy utilization. VMS are usually found together with aromatic compounds in landfill biogas of which toluene is the major representative. In the present study, two biofilters (BFs) packed with either woodchips and compost (WC) or perlite (PER) were used to study the (co-) removal of octamethyltrisiloxane (L3) and octamethylcyclotetrasiloxane (D4) from gas in presence and absence of toluene, used as a representative aromatic compound. The presence of low inlet toluene concentrations (315 ± 19 - 635 ± 80 mg toluene m-3) enhanced the VMS elimination capacity (EC) in both BFs by a factor of 1.8 to 12.6. The highest removal efficiencies for D4 (57.1 ± 1.1 %; EC = 0.12 ± 0.01 gD4 m-3 h-1) and L3 (52.0 ± 0.6 %; EC = 0.23 ± 0.01 gL3 m-3 h-1) were observed in the BF packed with WC. The first section of the BFs (EBRT = 9 min), where toluene was (almost) completely removed, accounted for the majority (87.7 ± 0.6 %) of the total VMS removal. Microbial analysis revealed the impact of VMS and toluene in the activated sludge, showing a clear selection for certain genera in samples influenced by VMS in the presence (X2) or absence (X1) of toluene, such as Pseudomonas (X1 = 0.91 and X2 = 12.0 %), Sphingobium (X1 = 0.09 and X2 = 4.04 %), Rhodococcus (X1 = 0.42 and X2 = 3.91 %), and Bacillus (X1 = 7.15 and X2 = 3.84 %). The significant maximum EC values obtained by the BFs (0.58 gVMS m-3 h-1) hold notable significance in a combined system framework as they could enhance the longevity of traditional physicochemical methods to remove VMS like activated carbon in diverse environmental scenarios.

Impact of p-cresol on hydrogen sulfide and ammonia treatment by biotrickling filter and the production of nitrous oxide.

Biotrickling filter (BTF) is often used for purification of waste gas from swine houses, with vital information still needed regarding interaction effects among multiple gas pollutants removal and also the formation of byproducts especially nitrous oxide (N2O, a strong greenhouse gas) due to the relative high NH3 concentration level compared to other gases. In this study, gas removal and N2O production were compared between two BTFs, where the inlet gas of BTF-1 contained NH3 and H2S while p-cresol was additionally supplied to BTF-2. At inlet load (IL) between 3.67 and 18.91 g m-3 h-1, removal efficiencies of NH3 exceeded 95% for both BTFs. As alternative strategy, adding thiosulfate improved H2S removal. Interestingly, presence of p-cresol to some extent promoted H2S removal at IL of 0.56 g m-3 h-1possibly due to effect on pH value of circulating solution. Similar to NH3, removal efficiencies of p-cresol were higher than 95% at an average IL of 2.98 g m-3 h-1. Gas residence time, pH of circulating solution and inlet loading were identified as key factors affecting BTF performance, but the response of individual gas compound to these factors was not consistent. Overall, p-cresol enhanced N2O generation although the effects were not always significant. High-throughput sequencing results showed that Proteobacteria accounted for the largest proportion of relative abundance and BTF-2 had much richer microbial diversity compared to BTF-1. Thermomonas, Comamonas, Rhodanobacter and other bacterial genus capable of denitrification were detected in both BTFs, and their corresponding abundances in BTF-2 (10.9%, 8.7% and 5.2%) were all greater than those in BTF-1 (0.4%, 0.3% and 2.0%), indicating that more denitrification may occur within BTF-2 and higher N2O could have been generated. This study provided evidence that organic gas components, served as carbon source, may increase the N2O production from BTF when treating waste gases containing NH3.

N2O recovery from wastewater and flue gas via microbial denitrification: Processes and mechanisms.

Nitrous oxide (N2O) is increasingly regarded as a significant greenhouse gas implicated in global warming and the depletion of the ozone layer, yet it is also recognized as a valuable resource. This paper comprehensively reviews innovative microbial denitrification techniques for recovering N2O from nitrogenous wastewater and flue gas. Critical analysis is carried out on cutting-edge processes such as the coupled aerobic-anoxic nitrous decomposition operation (CANDO) process, semi-artificial photosynthesis, and the selective utilization of microbial strains, as well as flue gas absorption coupled with heterotrophic/autotrophic denitrification. These processes are highlighted for their potential to facilitate denitrification and enhance the recovery rate of N2O. The review integrates feasible methods for process control and optimization, and presents the underlying mechanisms for N2O recovery through denitrification, primarily achieved by suppressing nitrous oxide reductase (Nos) activity and intensifying competition for electron donors. The paper concludes by recognizing the shortcomings in existing technologies and proposing future research directions, with an emphasis on prioritizing the collection and utilization of N2O while considering environmental sustainability and economic feasibility. Through this review, we aim to inspire interest in the recovery and utilization of N2O, as well as the development and application of related technologies.

Sansevieria trifasciata's specific metabolite improves tolerance and efficiency for particulate matter and volatile organic compound removal.

Phytoremediation has become famous for removing particulate matter (PM) and volatile organic compounds (VOCs), but the ability is affected by plant health. Lately, the priming technique was a simple approach to studying improving plant tolerance against abiotic stress by specific metabolites that accumulated, known as "memory", but the mechanism underlying this mechanism and how long this "memory" was retained in the plant was a lack of study. Sansevieria trifasciata was primed for one week for PM and VOC stress to improve plant efficiency on PM and VOC. After that, the plant was recovered for two- or five-weeks, then re-exposed to the same stress with similar PM and VOC concentrations from cigarette smoke. Primed S. trifasciata showed improved removal of PMs entirely within 2 h and VOC within 24 h. The primed plant can maintain a malondialdehyde (MDA) level and retain the "memory" for two weeks. Metabolomics analysis showed that an ornithine-related compound was accumulated as a responsive metabolite under exposure to PM and VOC stress. Exogenous ornithine can maintain plant efficiency and prevent stress by increasing proline and antioxidant enzymes. This study is the first to demonstrate plant "memory" mechanisms under PM and VOC stress.

Assessing the efficiency and microbial diversity of H2S-removing biotrickling filters at various pH conditions.

This study aimed to investigate the operation of three parallel biotrickling filters (BTFs) in removing H2S at different pH conditions (haloalkaliphilic, neutrophilic, and acidophilic) and their associated microbial population in the biodesulfurization process. BTF columns were inoculated with enriched inoculum and experiments were performed by gradually reducing Empty Bed Retention Time (EBRT) and increasing inlet concentration in which the maximum removal efficiency and maximum elimination capacity in EBRT 60 s reached their maximum level in haloalkaline condition (91% and 179.5 g S-H2S m-3 h-1). For visualizing the attached microbial biofilms on pall rings, Scanning Electron Microscopy (SEM) was used and microbial community structure analysis by NGS showed that the most abundant phyla in haBTF, nBTF, and aBTF belong to Gammaproteobacteria, Betaproteobacteria, and Acidithiobacillia, respectively. Shannon and Simpson indexes evaluation showed a lower diversity of bacteria in the aBTF reactor than that of nBTF and haBTF and beta analysis indicated a different composition of bacteria in haBTF compared to the other two filters. These results indicated that the proper performance of BTF under haloalkaliphilic conditions is the most effective way for H2S removal from air pollutants of different industries.

Understanding mercury accumulation in mosses of two subalpine forests in China.

The role of forest ecosystems in the global mercury (Hg) biogeochemical cycle is widely recognized; however, using litterfall as a surrogate to assess the Hg sink function of forests encounters limitations. We investigated the accumulation characteristics and influencing factors of Hg in mosses from two remote subalpine forests in southwestern China. The results indicated that there was high Hg accumulation in subalpine forest mosses, with average concentrations of 82 ± 49 ng g-1 for total mercury (THg) and 1.3 ± 0.8 ng g-1 for methylmercury (MeHg). We demonstrated that the accumulation capacity of Hg in mosses was significantly dependent on species and substrates (micro-habitats), the mosses on tree trunks exhibited significantly elevated Hg accumulation levels (THg 132 ± 56 ng g-1, MeHg 1.6 ± 0.2 ng g-1) compared to mosses in other substrates. The surface morphologies and biochemical components of leaf (phyllidia), such as cation exchange capacity (CEC), pectin, uronic acid, and metallothionein, play a crucial role in the accumulation of Hg by mosses. These findings provide valuable insights into Hg accumulation in forest mosses. Suggesting that the contribution of mosses Hg accumulation should be considered when assessing atmospheric Hg sinks of forests.

The European trees phyllosphere characteristics and its potential in air bioremediation.

The air pollution remediation is naturally carried out by plants. Their overground parts called phyllosphere are a type of a natural filter on which pollutants can be adsorb. Moreover, microbial communities living in phyllosphere perform a variety of biochemical processes removing also chemical pollutants. As their pollution is nowadays a burning issue especially for highly developed countries, the development of effective and ecological technologies for air treatment are of the utmost importance. The use of phyllosphere bacteria in the process of air bioremediation is a promising technology. This article reviews the role of phyllospheric bacteria in air bioremediation processes especially linked with the moderate climate plants. Research results published so far indicate that phyllosphere bacteria are able to metabolize the air pollutants but their potential is strictly determined by plant-phyllospheric bacteria interaction. The European tree species most commonly used for this purpose are also presented. The collected information filled the gap in the practical use of tree species in air bioremediation in the moderate climate zone.

Insights into growth stages and genotypes in airborne Pb accumulation in Oryza sativa L. grains: Utilizing isotope fingerprinting alongside a model study.

Atmospheric exposure is an important pathway of accumulation of lead (Pb) in Oryza sativa L. grains. In this study, source contributions of soil, early atmospheric exposure, and late atmospheric exposure, along with their bioaccumulation ratios were examined both in the pot and field experiments using stable Pb isotope fingerprinting technology combined with a three-compartment accumulation model. Furthermore, genotype differences in airborne Pb accumulation among four field-grown rice cultivars were investigated using the partial least squares path model (PLS-PM) linking rice Pb accumulation to agronomic traits. The findings revealed that during the late growth period, the air-foliar-grain transfer of Pb was crucial for rice Pb accumulation. Approximately 69-82% of the Pb found in polished rice was contributed by atmospheric source, with more than 80% accumulating during the late growth stage. The air accumulation ratios of rice grains were genotype-specific and estimated to be 0.364-1.062 m3/g during the late growth. Notably, grain size exhibited the highest standardized total effects on the airborne Pb concentrations in the polished rice, followed by leaf Pb and the upward translocation efficiency of Pb. The present study indicates that mitigating the health risks associated with Pb in rice can be achieved by controlling atmospheric Pb levels during the late growth stage and choosing Japonica inbred varieties characterized by large grain size.

Determination of the maximum bioaccumulation capacity of various metals in leaves of two Tillandsia species.

Tillandsia species are plants from the Bromeliaceae family which display biomonitoring capacities in both active and passive modes. The bioaccumulation potential of Tillandsia aeranthos (Loisiel.) Desf. and Tillandsia bergeri Mez acclimated to Southern/Mediterranean Europe has never been studied. More generally, few studies have detailed the maximum accumulation potential of Tillandsia leaves through controlled experiments. The aim of this study is to evaluate the maximum accumulation values of seven metals (Co, Cu, Mn, Ni, Pb, Pt, and Zn) in T. aeranthos and T. bergeri leaves. Plants were immersed in different mono elemental metallic solutions of Co (II), Cu (II), Mn (II), Ni (II), Pb (II), Pt (IV), and Zn (II) ions at different concentrations. In addition, cocktail solutions of these seven metals at different concentrations were prepared to study the main differences and the potential selectivity between metals. After exposure, the content of these metals in the leaves were measured by inductively coupled plasma-optical emission spectrometry. Data sets were evaluated by a fitted regression hyperbola model and principal component analysis, maximum metal loading capacity, and thermodynamic affinity constant were determined. The results showed important differences between the two species, with T. bergeri demonstrating higher capacity and affinity for metals than T. aeranthos. Furthermore, between the seven metals, Pb and Ni showed higher enrichment factors (EF). T. bergeri might be a better bioaccumulator than T. aeranthos with marked selectivity for Pb and Ni, metals of concern in air quality biomonitoring.

Advances in amelioration of air pollution using plants and associated microbes: An outlook on phytoremediation and other plant-based technologies.

Globally, air pollution is an unfortunate aftermath of rapid industrialization and urbanization. Although the best strategy is to prevent air pollution, it is not always feasible. This makes it imperative to devise and implement techniques that can clean the air continuously. Plants and microbes have a natural potential to transform or degrade pollutants. Hence, strategies that use this potential of living biomass to remediate air pollution seem to be promising. The simplest future trend can be planting suitable plant-microbe species capable of removing air pollutants like SO2, CO2, CO, NOX and particulate matter (PM) along roadsides and inside the buildings. Established wastewater treatment strategies such as microbial fuel cells (MFC) and constructed wetlands (CW) can be suitably modified to ameliorate air pollution. Green architecture involving green walls and green roofs is facile and aesthetic, providing urban ecosystem services. Certain microbe-based bioreactors such as bioscrubbers and biofilters may be useful in small confined spaces. Several generative models have been developed to assist with planning and managing green spaces in urban locales. The physiological limitations of using living organisms can be circumvent by applying biotechnology and transgenics to improve their potential. This review provides a comprehensive update on not just the plants and associated microbes for the mitigation of air pollution, but also lists the technologies that are available and/or can be modified and used for air pollution control. The article also gives a detailed analysis of this topic in the form of strengths-weaknesses-opportunities-challenges (SWOC). The strategies mentioned in this review would help to attain corporate Environmental Social and Governance (ESG) and Sustainable Development Goals (SDGs), while reducing carbon footprint in the urban scenario. The review aims to emphasise that urbanization is possible while tackling air pollution using facile, green techniques involving plants and associated microbes.

A multi-omics investigation of the lung injury induced by PM2.5 at environmental levels via the lung-gut axis.

Long-term exposure to fine particulate matter (PM2.5) posed injury for gastrointestinal and respiratory systems, ascribing with the lung-gut axis. However, the cross-talk mechanisms remain unclear. Here, we attempted to establish the response networks of lung-gut axis in mice exposed to PM2.5 at environmental levels. Male Balb/c mice were exposed to PM2.5 (dose of 0.1, 0.5, and 1.0 mg/kg) collected from Chengdu, China for 10 weeks, through intratracheally instillation, and examined the effect of PM2.5 on lung functions of mice. The changes of lung and gut microbiota and metabolic profiles of mice in different groups were determined. Furthermore, the results of multi-omics were conjointly analyzed to elucidate the primary microbes and the associated metabolites in lung and gut responsible for PM2.5 exposure. Accordingly, the cross-talk network and key pathways between lung-gut axis were established. The results indicated that exposed to PM2.5 0.1 mg/kg induced obvious inflammations in mice lung, while emphysema was observed at 1.0 mg/kg. The levels of metabolites guanosine, hypoxanthine, and hepoxilin B3 increased in the lung might contribute to lung inflammations in exposure groups. For microbiotas in lung, PM2.5 exposure significantly declined the proportions of Halomonas and Lactobacillus. Meanwhile, the metabolites in gut including L-tryptophan, serotonin, and spermidine were up-regulated in exposure groups, which were linked to the decreasing of Oscillospira and Helicobacter in gut. Via lung-gut axis, the activations of pathways including Tryptophan metabolism, ABC transporters, Serotonergic synapse, and Linoleic acid metabolism contributed to the cross-talk between lung and gut tissues of mice mediated by PM2.5. In summary, the microbes including Lactobacillus, Oscillospira, and Parabacteroides, and metabolites including hepoxilin B3, guanosine, hypoxanthine, L-tryptophan, and spermidine were the main drivers. In this lung-gut axis study, we elucidated some pro- and pre-biotics in lung and gut microenvironments contributed to the adverse effects on lung functions induced by PM2.5 exposure.

Impact of fine particulate matter on liver injury: evidence from human, mice and cells.

BACKGROUND: A recently discovered risk factor for chronic liver disease is ambient fine particulate matter (PM2.5). Our research aims to elucidate the effects of PM2.5 on liver injury and the potential molecular mechanisms. METHODS AND RESULTS: A population-based longitudinal study involving 102,918 participants from 15 Chinese cities, using linear mixed-effect models, found that abnormal alterations in liver function were significantly associated with long-term exposure to PM2.5. The serum levels of alanine aminotransferase, aspartate aminotransferase, gamma-glutamyl transferase, direct bilirubin, and triglyceride increased by 2.05%, 2.04%, 0.58%, 2.99%, and 1.46% with each 10 µg/m3 increase in PM2.5. In contrast, the serum levels of total protein, albumin, and prealbumin decreased by 0.27%, 0.48%, and 2.42%, respectively. Mice underwent chronic inhalation exposure to PM2.5 experienced hepatic inflammation, steatosis and fibrosis. In vitro experiments found that hepatocytes experienced an inflammatory response and lipid metabolic dysregulation due to PM2.5, which also activated hepatic stellate cells. The down-regulation and mis-localization of polarity protein Par3 mediated PM2.5-induced liver injury. CONCLUSIONS: PM2.5 exposure induced liver injury, mainly characterized by steatosis and fibrosis. The down-regulation and mis-localization of Par3 were important mechanisms of liver injury induced by PM2.5.

Role and mechanism of miR-871-3p/Megf8 in regulating formaldehyde-induced cardiomyocyte inflammation and congenital heart disease.

OBJECTIVE AND DESIGN: We aimed to investigate the molecular mechanism underlying formaldehyde (FA)-induced congenital heart disease (CHD) using in vitro and in vivo models. MATERIALS AND SUBJECTS: Neonatal rat heart tissues and H9C2 cells were used for in vitro studies, while FA-exposed new-born rats were used for in vivo studies. TREATMENT: H9C2 cells were exposed to FA concentrations of 0, 50, 100 and 150 µM/mL for 24 h. METHODS: Whole transcriptome gene sequencing identified differentially expressed miRNAs in neonatal rat heart tissues, while Real-time quantitative PCR (RT-qPCR) assessed miR-871-3p and Megf8 expression. RNA pull-down and dual-luciferase reporter assays determined miR-871-3p and Megf8 relationships. Inflammatory cytokine expression was assessed by western blotting. A FA-induced CHD model was used to validate miR-871-3p regulatory effects in vivo. RESULTS: We identified 89 differentially expressed miRNAs, with 28 up-regulated and 61 down-regulated (fold change ≥ 2.0, P < 0.05). Inflammation (interleukin) and signalling pathways were found to control FA-induced cardiac dysplasia. miR-871-3p was upregulated in FA-exposed heart tissues, modulated inflammation, and directly targeted Megf8. In vivo experiments showed miR-871-3p knockdown inhibited FA-induced inflammation and CHD. CONCLUSION: We demonstrated miR-871-3p's role in FA-induced CHD by targeting Megf8, providing potential targets for CHD intervention and improved diagnosis and treatment strategies.

A review of the recent progress in biotrickling filters: packing materials, gases, micro-organisms, and CFD.

Organic pollutants in the air have serious consequences on both human health and the environment. Among the various methods for removing organic pollution gas, biotrickling filters (BTFs) are becoming more and more popular due to their cost-effective advantages. BTF can effectively degrade organic pollutants without producing secondary pollutants. In the current research on the removal of organic pollutants by BTF, improving the performance of BTF has always been a research hotspot. Researchers have conducted studies from different aspects to improve the removal performance of BTF for organic pollutants. Including research on the performance of BTF using different packing materials, research on the removal of various mixed pollutant gases by BTF, research on microbial communities in BTF, and other studies that can improve the performance of BTF. Moreover, computational fluid dynamics (CFD) was introduced to study the microscopic process of BTF removal of organic pollutants. CFD is a simulation tool widely used in aerospace, automotive, and industrial production. In the study of BTF removal of organic pollutants, CFD can simulate the fluid movement, mass transfer process, and biodegradation process in BTF in a visual way. This review will summarize the development of BTFs from four aspects: packing materials, mixed gases, micro-organisms, and CFD, in order to provide a reference and direction for the future optimization of BTFs.

Role of different mechanisms in pro-inflammatory responses triggered by traffic-derived particulate matter in human bronchiolar epithelial cells.

BACKGROUND: Traffic-derived particles are important contributors to the adverse health effects of ambient particulate matter (PM). In Nordic countries, mineral particles from road pavement and diesel exhaust particles (DEP) are important constituents of traffic-derived PM. In the present study we compared the pro-inflammatory responses of mineral particles and DEP to PM from two road tunnels, and examined the mechanisms involved. METHODS: The pro-inflammatory potential of 100 µg/mL coarse (PM10-2.5), fine (PM2.5-0.18) and ultrafine PM (PM0.18) sampled in two road tunnels paved with different stone materials was assessed in human bronchial epithelial cells (HBEC3-KT), and compared to DEP and particles derived from the respective stone materials. Release of pro-inflammatory cytokines (CXCL8, IL-1α, IL-1ß) was measured by ELISA, while the expression of genes related to inflammation (COX2, CXCL8, IL-1α, IL-1ß, TNF-α), redox responses (HO-1) and metabolism (CYP1A1, CYP1B1, PAI-2) was determined by qPCR. The roles of the aryl hydrocarbon receptor (AhR) and reactive oxygen species (ROS) were examined by treatment with the AhR-inhibitor CH223191 and the anti-oxidant N-acetyl cysteine (NAC). RESULTS: Road tunnel PM caused time-dependent increases in expression of CXCL8, COX2, IL-1α, IL-1ß, TNF-α, COX2, PAI-2, CYP1A1, CYP1B1 and HO-1, with fine PM as more potent than coarse PM at early time-points. The stone particle samples and DEP induced lower cytokine release than all size-fractionated PM samples for one tunnel, and versus fine PM for the other tunnel. CH223191 partially reduced release and expression of IL-1α and CXCL8, and expression of COX2, for fine and coarse PM, depending on tunnel, response and time-point. Whereas expression of CYP1A1 was markedly reduced by CH223191, HO-1 expression was not affected. NAC reduced the release and expression of IL-1α and CXCL8, and COX2 expression, but augmented expression of CYP1A1 and HO-1. CONCLUSIONS: The results indicate that the pro-inflammatory responses of road tunnel PM in HBEC3-KT cells are not attributed to the mineral particles or DEP alone. The pro-inflammatory responses seem to involve AhR-dependent mechanisms, suggesting a role for organic constituents. ROS-mediated mechanisms were also involved, probably through AhR-independent pathways. DEP may be a contributor to the AhR-dependent responses, although other sources may be of importance.

Glutaminase 1 isoform up-regulation associated with lipid metabolism disorder induced by methyl tertiary-butyl ether in male rats.

Methyl tertiary-butyl ether (MTBE) is a new unleaded gasoline additive, which is considered to be associated with abnormal lipid metabolism in many studies, but the metabolic characteristics and mechanism are still unclear. To observe the characteristics of lipid metabolism induced by MTBE and possible pathways, 21 male Wistar rats got intragastric administration for 24 weeks. The serum lipid metabolism indexes and metabolites were analyzed separately by a biochemical analyzer and untargeted metabolomics. And found that serum high-density lipoprotein cholesterol (HDL-C) levels in the exposure group were significantly reduced, and serum very low-density lipoprotein (VLDL) levels were significantly increased. In untargeted metabolomics, 190 differential metabolites were obtained. Among them, 23 metabolites were found to show the same trend in MTBE exposure groups, which might play a key role in systemic energy metabolism. Further metabolic pathways analysis showed that D-Glutamine, D-glutamate metabolism, and the other three pathways were affected by MTBE significantly. Therefore, we evaluated serum glutamine and glutamate levels and found that MTBE exposure significantly reduced glutamine levels and increased glutamate levels in rat serum and L-02 cells. Further, the key regulatory gene of glutamine metabolism, glutaminase 1 isoform (GLS1), was significantly up-regulated in rat liver and L-02 cells exposed to MTBE. While the effect of glutamine and glutamate metabolism induced by MTBE could be weakened by BPTES, an antagonist of GLS1. In conclusion, our results indicated that MTBE exposure could change the level of glutamine metabolism by promoting GLS1 expression and ultimately lead to abnormal lipid metabolism.

KCNQ1 rs2237892 polymorphism modify the association between short-term ambient particulate matter exposure and fasting blood glucose: A family-based study.

BACKGROUND: The association between particulate matter and fasting blood glucose (FBG) has shown conflicting results. Genome-wide association studies have shown that KCNQ1 rs2237892 polymorphism is associated with the risk of diabetes. Whether KCNQ1 rs2237892 polymorphism might modify the association between particulate matter and FBG is still uncertain. METHODS: Data collected from a family-based cohort study in Northern China, were used to perform the analysis. A generalized additive Gaussian model was used to examine the short-term effects of air pollutants on FBG. We further conducted interaction analyses by including a cross-product term of air pollutants by rs2237892 within KCNQ1 gene. RESULTS: A total of 4418 participants were included in the study. In the single pollutant model, the FBG level increased 0.0031 mmol/L with per 10 µg/m3 elevation in fine particular matter (PM2.5) for lag 0 day. After additional adjustments for nitrogen dioxide (NO2) and sulfur dioxide (SO2), similar results were observed for lag 0-2 days. As for particulate matter with particle size below 10 µm (PM10), the significant association between the daily average concentration of the pollutant and FBG level was observed for lag 0-3 days. Additionally, rs2237892 in KCNQ1 gene modified the association between PM and FBG level. The higher risk of FBG levels associated with elevations in PM10 and PM2.5 were more evident as the number of risk allele C increased. Individuals with a CC genotype had the highest risk of elevation in FBG levels. CONCLUSION: Short-term exposures to PM2.5 and PM10 were associated with higher FBG levels. Additionally, rs2237892 in KCNQ1 gene might modify the association between the air pollutants and FBG levels.