Long-term performance: strength and metal encapsulation in alkali-activated iron ore tailings.

Understanding the strength behavior and leaching characteristics of mining tailings stabilized with alkali-activated cements in the short, medium, and long term is crucial for the feasibility of material applications. In this context, this study assessed the stabilization/solidification of iron ore tailings (IOT) using alkali-activated binder (AAB) composed of sugarcane bagasse ash and eggshell lime at curing times of 7, 28, 60, 90, 180, and 365 days. Additionally, leaching tests were conducted, along with the examination of possible changes in the chemical and mineralogical composition resulting from exposure to acidic environments. Tests included unconfined compression strength (UCS), leaching, X-ray diffraction, and Fourier-transform infrared spectroscopy for the IOT-AAB mixtures. The highest increase in UCS was observed between 7 and 60 days, reaching 6.47 MPa, with minimal variation thereafter. The AAB-bonded IOT exhibited no metal toxicity over time. Elements Ba, Mn, Pb, and Zn present in IOT and ash were encapsulated in the cemented matrix, with complete encapsulation of all metals observed from 90 days of curing time. The mineralogy of the stabilized/solidified tailings showed no changes resulting from leaching tests. Characteristic bands associated with the presence of N-A-S-H gel were identified in both pre-leaching and post-leaching samples for all curing times analyzed. Exposure to acidic environments altered bands related to carbonate bonds formed in the IOT-AAB mixture.

Effect of Non-Calcined Sugarcane Bagasse Ash as an Alternative Precursor on the Properties of Alkali-Activated Pastes.

BFS-MK-based alkali-activated materials are well established as an alternative for sustainable and green construction. This work aims to collaborate and encourage the use of biomass ashes, such as sugarcane bagasse ash (SCBA), as a precursor in alkali-activated materials (AAM). This ash is a rich source of aluminosilicate, which is a primary requirement for this application. In addition, this waste is still an environmental liability, especially in developing countries, and with a large volume of annual production. Thus, in this research, alkali-activated pastes (AA) were produced using sugarcane bagasse ash (SCBA), granulated blast furnace slag (BFS) and metakaolin (MK) as precursors. In addition, environmental gains were encouraged with energy savings, with no extra reburn or calcination steps in the SCBA. Thus, the precursors were characterized by laser granulometry, X-ray fluorescence spectrometry (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The pastes were produced by mixing the precursors with the activator, composed of a mixture of sodium hydroxide 8 mol/L and sodium silicate. Aiming to study the incorporation of SCBA, all samples have a precursor/activator ratio and a BFS/(BFS + MK) ratio constant of 0.6. The compressive strength analysis, FTIR, XRD, TGA, SEM and isothermal calorimetry analyses pointed out the occurrence of alkaline activation in all proposed samples for curing times of 7, 28 and 91 days. The sample GM0.6-BA0 (15% SCBA) achieved the highest compressive strength among the samples proposed (117.7 MPa, at 91 days), along with a good development of strength throughout the curing days. Thus, this work presents the properties of alkaline-activated pastes using SCBA as a sustainable and alternative precursor, seeking to encourage the use of raw materials and alternative waste in civil construction.

ZnO Nanoparticles for Photocatalytic Application in Alkali-Activated Materials.

This paper reports an Alkali-Activated Materials (AAM) using two different precursors, metakaolin and a metallurgical slag with photocatalytic zinc oxide nanoparticles, as novel photocatalytic composites. The photodegradation performance of the composites using methylene blue (MB) dye as a wastewater model was investigated by ultraviolet radiations (UV-vis) spectroscopy. Adsorption in dark conditions and photodegradation under UV irradiation are the mechanisms for removing MB dye. The pseudo-first-order kinetic and pseudo-second-order kinetic models were employed, and the experimental data agreed with the pseudo-second-order model in both cases with UV and without UV irradiations. As new photocatalytic materials, these composites offer an alternative for environmental applications.

High-energy alkaline milling as a potential physical and chemical cornstarch ecofriendly treatment to produce nixtamalized flours.

In this study, hard corn grains were nixtamalized (alkali-heat treatment) by a high-energy ball mill to investigate the effects on its physicochemical, textural, and microstructural properties. Ball milling modifies the structure and properties of cornstarch. The gelatinization peak of starch was evidenced and thermal and pasting properties were significantly affected. With regard to rheological properties, the viscosity peak increased from 2454 cP in traditional nixtamalized flour to 4294 cP in high-energy milling treatments with 1.4% of Ca(OH)2 and 20% moisture content, C1.4, while enthalpy ranged from 3.5 to 0.34 J/g, respectively. High-energy milling influenced the Fourier-Transform InfraRed Spectroscopic (FT-IR) patterns. All of the samples of the corn-grain starches presented the typical A-type X-ray diffraction pattern. The crystallinity of starch from CG showed a lower intensity in peaks 2θ ~ 15 and 23° compared with starch from WG and YG. The textural properties of the masas were influenced, adhesiveness was reduced, but cohesiveness was increased by the addition of Ca(OH)2. In the structural characterization by E-SEM, the control presented a greater amount of agglomerated starch granules, followed by the high-energy milling treatments. The results suggest that high-energy alkaline milling could be a potential physical and chemical method to modify corn-starch properties and obtain nixtamalized products.

Resistance to Chemical Attack of Hybrid Fly Ash-Based Alkali-Activated Concretes.

The environmental impacts related to Portland cement production in terms of energy consumption, the massive use of natural resources and CO2 emissions have led to the search for alternative cementitious materials. Among these materials, alkali-activated cements based on fly ash (FA) have been considered for concrete production with greater sustainability. In the present article, the chemical durability properties (resistance to sulphates, chloride permeability, and resistance to carbonation) of a hybrid alkali-activated concrete based on fly ash-ordinary Portland cement (FA/OPC) with proportions of 80%/20% were evaluated. It is noted that the FA was a low-quality pozzolan with a high unburned carbon content (20.67%). The results indicated that FA/OPC concrete had good durability with respect to the OPC concrete, with 95% less expansion in the presence of sodium sulphate and a 2% strength loss at 1100 days, compared with the 56% strength loss of the OPC concrete. In addition, FA/OPC showed lower chloride permeability. On the contrary, the FA/OPC was more susceptible to carbonation. However, the residual compressive strength was 23 MPa at 360 days of CO2 exposure. Based on the results, FA/OPC, using this type of FA, can be used as a replacement for OPC in the presence of these aggressive agents in the service environment.

Effects of aluminum on the expansion and microstructure of alkali-activated MSWI fly ash-based pastes.

Alkaline activation is of great potential in the solidification of municipal solid waste incineration (MSWI) fly ash, but the metallic aluminum in the ash inhibits its application. This work studies the effects of residual metallic aluminum on the expansion and microstructure of alkali-activated MSWI fly ash-based pastes. Based on the results obtained, an optimized preparation process is suggested. Characterizations of the pastes include expansion ratio, morphology (SEM), mechanical strength and microstructure (XRD and FTIR). It is confirmed that MSWI fly ash could be solidified through alkaline activation when using a small amount of coal fly ash to adjust the reactive silica and aluminum ratios. In the optimized preparation, sodium hydroxide was added separately, so that expansion in the pastes was significantly mitigated, the formation of geopolymer gel was improved and the compressive strength of the pastes increased.

Analysis of the Acid/Base Profile of Natural Products from Different Sources.

For many years drug discovery and other areas in chemistry have successfully relied on natural products. Recent advances in computational methods have made possible to study the chemical space of natural products from different sources. Ionizable acidic and basic functional groups heavily influence physicochemical properties and thus a molecule's absorption, distribution, metabolism, excretion, and toxicity characteristics as well as their affinity for biological targets. This work reports the generation and critical comparison of the acid/base profiles of ten chemical databases including seven natural products sets from different origins, a set of semisynthetic compounds, a collection of approved drugs, and a compendium of food chemicals. Similarities were found in the proportion of the main charge state categories among the natural products databases with few differences in their pKa distributions. Clear differences were observed between natural products and the approved drugs and semi-synthetic natural products databases, whereas natural products share some trends with the food chemical database. We noted that the natural products collections comprise around 45 % of neutral compounds. The proportion of single acids was approximately twice that found for FDA drugs, and they demonstrated a similar distribution of pKa values. In contrast to drugs, only 5 % of compounds among the natural products sets had a single basic group. Likewise, simple ampholytes were less prevalent in the natural products databases relative to drugs.

Molecular mechanisms associated with acidification and alkalization along the larval midgut of Musca domestica.

To disclose the molecular mechanisms involved in luminal midgut buffering of M. domestica, we used RNA-seq analyses from triplicate samples of seven sections along the midgut to evaluate the expression levels of genes coding for selected manually curated protein sequences. Channels, pumps and transporters were confirmed as being apical by proteomics of purified microvillar membranes. Midgut pH determinations with a microsensor and a pH indicator were carried out in larvae in different diets with or without added compounds to evaluate the role of proteins in buffering. The data suggested that acidification occurs at middle midgut by the action of H+ V-ATPase with protons produced by carbonic anhydrase, followed by chloride ions transported by a K+Cl- symporter. K+ ions are recovered by an apical K+ channel and K+ homeostasis maintained by a basolateral Na+/K+-ATPase. Acidification is also affected by a Na+/H+ exchanger and a multidrug resistance protein. Posterior midgut alkalization results from the action of a NH3 transporter and H+-coupled peptide transporter, mainly in a diet rich in free peptides. A working model was proposed for the midgut luminal acidification and alkalization, as well as for mucosal protection against acid by a neutralized mucus layer.

The fate of Bacillus cereus and Geobacillus stearothermophilus during alkalization of cocoa as affected by alkali concentration and use of pre-roasted nibs.

Alkalization is a step of cocoa processing and consists of the use of alkali and high temperature to improve the sensorial and technological qualities of cocoa. Intense food processing can select spores, which can compromise safety and quality of the final product. Thus, the aim of this study was to evaluate the fate of B. cereus and G. stearothermophilus spores during the alkalization of pre-roasted (Pr) nibs (held at 120 °C) and unroasted (Ur) nibs (held at 90 °C) using potassium carbonate (0, 2, 4 and 6% w/w). In all conditions, log-linear inactivation kinetics with a tail was observed. The inactivation rate (kmax) for B. cereus varied from 0.065 to 1.67 min-1, whereas the kmax for G. stearothermophilus varied from 0.012 to 0.063 min-1. For both microorganisms, the lowest kmax values were observed during Ur nibs alkalization. The carbonate concentration increase promoted kmax values reduction. The highest tail values were observed for G. stearothermophilus in Ur nibs alkalization, reaching 3.04 log spores/g. Tail formation and low kmax values indicated that cocoa alkalization does not cause significant reductions on bacterial spore population. Therefore, the microbiological control should be primarily ensured by the raw material quality and by avoiding recontamination in the cocoa chain.

Assessment of Hg contamination by a Chlor-Alkali Plant in riverine and coastal sites combining Hg speciation and isotopic signature (Sagua la Grande River, Cuba).

Chlor-alkali plants (CAP) are recognized as major sources of mercury (Hg) in the environment. In this work, Hg concentration, speciation and isotopic signature were determined in sediments and biota (fish and oyster) from Sagua La Grande River (SG River) and the adjacent coastal zone in the vicinity of a CAP (Cuba). High Hg concentrations in surface sediments (up to 5072 ng g-1), mainly occurring as inorganic Hg, decrease with the distance from the CAP along the SG River and seaward. Meanwhile, Hg concentration and speciation in riverine catfish (Claria gariepinus) muscle (1093 ± 319 ng g-1, ˜70% as MeHg) and coastal oysters (Crassostrea rizophorae) (596 ± 233 ng g-1, ˜50% as MeHg) indicate a direct impact from CAP. Hg isotopic signature in sediments, following both mass dependent (MDF) and mass independent fractionation (MIF), exhibits a clear binary mixing between CAP pollution (+0.42‰, δ202Hg; -0.18‰, Δ201Hg) and regional background end-member (˜ -0.49‰, δ202Hg; +0.01‰, Δ201Hg). The combination of speciation and isotopic information in biota and sediments allows to trace Hg contamination pathways from contaminated sediments to the biota, establishing the importance of both methylation and demethylation extent in both river and coastal sites before Hg species bioaccumulation.

The alkaline transition of cytochrome c revisited: Effects of electrostatic interactions and tyrosine nitration on the reaction dynamics.

Here we investigated the effect of electrostatic interactions and of protein tyrosine nitration of mammalian cytochrome c on the dynamics of the so-called alkaline transition, a pH- and redox-triggered conformational change that implies replacement of the axial ligand Met80 by a Lys residue. Using a combination of electrochemical, time-resolved SERR spectroelectrochemical experiments and molecular dynamics simulations we showed that in all cases the reaction can be described in terms of a two steps minimal reaction mechanism consisting of deprotonation of a triggering group followed by ligand exchange. The pKaalk values of the transition are strongly modulated by these perturbations, with a drastic downshift upon nitration and an important upshift upon establishing electrostatic interactions with a negatively charged model surface. The value of pKaalk is determined by the interplay between the acidity of a triggering group and the kinetic constants for the forward and backward ligand exchange processes. Nitration of Tyr74 results in a change of the triggering group from Lys73 in WT Cyt to Tyr74 in the nitrated protein, which dominates the pKaalk downshift towards physiological values. Electrostatic interactions, on the other hand, result in strong acceleration of the backward ligand exchange reaction, which dominates the pKaalk upshift. The different physicochemical conditions found here to influence pKaalk are expected to vary depending on cellular conditions and subcellular localization of the protein, thus determining the existence of alternative conformations of Cyt in vivo.

Inhibitors Compounds on Sugarcane Bagasse Saccharification: Effects of Pretreatment Methods and Alternatives to Decrease Inhibition.

Considering bioethanol production, extensive research has been performed to decrease inhibitors produced during pretreatments, to diminish energy input, and to decrease costs. In this study, sugarcane bagasse was pretreated with NaOH, H2SO4, and water. The higher concentration of phenols, 3.3 g/L, was observed in biomass liquid fraction after alkaline pretreatment. Acid pretreatment was responsible to release considerable acetic acid concentration, 2.3 g/L, while water-based pretreatment was the only to release formic acid, 0.02 g/L. Furans derivatives were not detected in liquid fractions regardless of pretreatment. Furthermore, washing step removed most of the phenols from pretreated sugarcane bagasse. Saccharification of alkali-pretreated biomass plus polyethylene glycol (PEG) at 0.4% (w/v) enhanced 8 and 26% the glucose and the xylose release, respectively, while polyvinylpyrrolidone (PVP) also at 0.4% (w/v) increased the release by 10 and 31% of these sugars, respectively, even without washing and filtration steps. Moreover, these polymers cause above 50% activation of endoglucanase and xylanase activities which are crucial for biomass hydrolysis.

Association of high pressure and alkaline condition for solubilization of inclusion bodies and refolding of the NS1 protein from zika virus.

BACKGROUND: Proteins in inclusion bodies (IBs) present native-like secondary structures. However, chaotropic agents at denaturing concentrations, which are widely used for IB solubilization and subsequent refolding, unfold these secondary structures. Removal of the chaotropes frequently causes reaggregation and poor recovery of bioactive proteins. High hydrostatic pressure (HHP) and alkaline pH are two conditions that, in the presence of low level of chaotropes, have been described as non-denaturing solubilization agents. In the present study we evaluated the strategy of combination of HHP and alkaline pH on the solubilization of IB using as a model an antigenic form of the zika virus (ZIKV) non-structural 1 (NS1) protein. RESULTS: Pressure-treatment (2.4 kbar) of NS1-IBs at a pH of 11.0 induced a low degree of NS1 unfolding and led to solubilization of the IBs, mainly into monomers. After dialysis at pH 8.5, NS1 was refolded and formed soluble oligomers. High (up to 68 mg/liter) NS1 concentrations were obtained by solubilization of NS1-IBs at pH 11 in the presence of arginine (Arg) with a final yield of approximately 80% of total protein content. The process proved to be efficient, quick and did not require further purification steps. Refolded NS1 preserved biological features regarding reactivity with antigen-specific antibodies, including sera of ZIKV-infected patients. The method resulted in an increase of approximately 30-fold over conventional IB solubilization-refolding methods. CONCLUSIONS: The present results represent an innovative non-denaturing protein refolding process by means of the concomitant use of HHP and alkaline pH. Application of the reported method allowed the recovery of ZIKV NS1 at a condition that maintained the antigenic properties of the protein.

Biochemical and Molecular Characterization of a Native Haloalkalophilic Tolerant Strain from the Texcoco Lake.

In the last decade several new genera have been isolated in alkaline and halophile growth conditions. The studies conducted in the Texcoco Lake soils have shown a generalized microbial adaptation to the specific conditions. In this research work, morphological and phylogenetic characterization of the HN31(22) strain that was isolated from the cited soil is presented. The strain was identified as a Gram-positive halophile and alkaline tolerant bacteria from the Nesterenkonia genus, which uses different substrates in metabolic processes.

Structural diversity of alkali-soluble polysaccharides from the fruit cell walls of tucumã (Astrocaryum aculeatum), a commelinid monocotyledon from the family Arecaceae.

The polysaccharide compositions of primary and secondary cell walls of members of the family Arecaceae in the commelinid clade of monocotyledonous plants have previously been found to be distinguishable from other commelinid families, and to be more similar to those of non-commelinids. However, few studies have been conducted. We aimed to extract and characterize the main cell-wall polysaccharides in the fruit pulp of tucumã (Astrocaryum aculeatum), a member of Arecaceae family. Hemicellulosic polysaccharides extracted by alkali from the fruit pulp were present in greater proportions (6.4% yield) than water-extracted ones (3.0% yield). Thus, the former was analyzed using monosaccharide composition, methylation, molecular weight determination and 13C-NMR data. The tucumã alkaline extract presented a highly ramified acidic galactoarabinoxylan (53.7%), a linear (1 â†’ 5)-linked α-L-arabinan (27.8%), a low branched glucuronoxylan (14.1%) and small portions of a xyloglucan (4.4%). The major polysaccharide found in A. aculeatum (acidic galactoarabinoxylan) is similar to those found in other commelinid plants such as grasses and cereals.

Histopathological and Reproductive Evaluation in Male Rats Fed Jatropha curcas Seed Cake with or without Alkaline Hydrolysis and Subjected to Heat Treatment.

Jatropha curcas cake, a by-product of biodiesel production, is rich in protein and has potential to be used in livestock feed; however, the presence of antinutritional factors and phorbol esters limits its use. Thus, this study investigated toxicological and reproductive effects in male Wistar rats after subchronic exposure to J. curcas cake subjected to detoxification procedures. Rats were divided into seven groups (n = 10) and treated for 60 days. The control group received commercial feed, while experimental groups received a diet containing 5% J. curcas cake nonhydrolyzed or hydrolyzed with 5 M NaOH. The cakes were unwashed or washed with ethanol or water and were autoclaved at 121°C for 30 minutes. Alkaline hydrolysis combined with ethanol washing decreased the phorbol ester concentration in the cake by 98%. Histopathological findings included diffuse degeneration of the liver and edema around the pulmonary vessels in the nonhydrolyzed groups. In addition, nontreated females mated with males of nonhydrolyzed unwashed group showed a decreased number of live fetuses and an increased placental weight. There were no signs of toxicity in rats given hydrolyzed cakes washed and unwashed, indicating that alkaline hydrolysis associated with heat treatment is an efficient method for detoxification of the J. curcas cake.

Acid-base chemistry of frustrated water at protein interfaces.

Water molecules at a protein interface are often frustrated in hydrogen-bonding opportunities due to subnanoscale confinement. As shown, this condition makes them behave as a general base that may titrate side-chain ammonium and guanidinium cations. Frustration-based chemistry is captured by a quantum mechanical treatment of proton transference and shown to remove same-charge uncompensated anticontacts at the interface found in the crystallographic record and in other spectroscopic information on the aqueous interface. Such observations are untenable within classical arguments, as hydronium is a stronger acid than ammonium or guanidinium. Frustration enables a directed Grotthuss mechanism for proton transference stabilizing same-charge anticontacts.

Use of ancient copper slags in Portland cement and alkali activated cement matrices.

Some Chilean copper slag dumps from the nineteenth century still remain, without a proposed use that encourages recycling and reduces environmental impact. In this paper, the copper slag abandoned in landfills is proposed as a new building material. The slags studied were taken from Playa Negra and Púquios dumps, both located in the region of Atacama in northern Chile. Pozzolanic activity in lime and Portland cement systems, as well as the alkali activation in pastes with copper slag cured at different temperatures, was studied. The reactivity of the slag was measured using thermogravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray diffraction (XRD), electrical conductivity and pH in aqueous suspension and Fourier Transform Infrared Spectroscopy (FTIR). Furthermore, copper slag-Portland cement mortars with the substitution of 25% (by weight) of cement by copper slag and alkali-activated slag mortars cured at 20 and 65 °C were made, to determine the compressive strength. The results indicate that the ancient copper slags studied have interesting binding properties for the construction sector.

Physicochemical properties and interfacial adaptation of root canal sealers.

This study compared the physicochemical properties and interfacial adaptation to canal walls of Endo-CPM-Sealer, Sealapex and Activ GP with the well-established AH Plus sealer. The following analyses were performed: radiopacity, pH variation and solubility using samples of each material and scanning electron microscopy of root-filled bovine incisors to evaluate the interfacial adaptation. Data were analyzed by the parametric and no-parametric tests (α=0.05). All materials were in accordance with the ANSI/ADA requirements for radiopacity. Endo-CPM-Sealer presented the lowest radiopacity values and AH Plus was the most radiopaque sealer (p=0.0001). Except for ActiV GP, which was acidic, all other sealers had basic chemical nature and released hydroxyl ions. Regarding solubility, all materials met the ANSI/ADA recommendations, with no statistically significant difference between the sealers (p=0.0834). AH Plus presented the best adaptation to canal walls in the middle (p=0.0023) and apical (p=0.0012) thirds, while the sealers Activ GP and Endo-CPM-Sealer had poor adaptation to the canal walls. All sealers, except for ActiV GP, were alkaline and all of them fulfilled the ANSI/ADA requirements for radiopacity and solubility. Regarding the interfacial adaptation, AH Plus was superior to the others considering the adaptation to the bovine root canal walls.

Influence of the alkaline delignification on the simultaneous saccharification and fermentation (SSF) of sugar cane bagasse.

Ethanol production from steam explosion alkaline delignified bagasse was investigated by saccharification and simultaneous fermentation. Non delignified bagasse (ND) contained 25% lignin, and after alkaline delignification, materials with 6% (D1 - NaOH 1% w/v) and 12% (D05 - NaOH 0.5% w/v) lignin, respectively, were obtained. Ethanol production increased 450% and 733% in relation to ND, when D05 and D1 material, respectively, were used. Higher productivity and EtOH/bagasse were observed for D1. However, higher enzymatic convertibility of cellulose was obtained with 0.5% w/v NaOH. Alkaline delignification increased the ethanol production despite decreased cellulose.