ABSTRACT
Imaged capillary isoelectric focusing (icIEF) is a preferred analytical method for determining isoelectric points (pIs) and charge heterogeneity profiles in biotherapeutic proteins. In this study, we optimized the icIEF method for an in-house IgG1κ monoclonal antibody (mAb-1) and assessed its reproducibility, robustness, and autosampler stability. The optimized method was used to evaluate batch-to-batch consistency in pIs for multiple lots of mAb-1 and determine the relative percentages of charge variants. We also tested the method's performance using multiple lots of another IgG1 mAb, commercially available as Herceptin (trastuzumab). Additionally, we designed and assessed native and denaturing platform icIEF methods for 11 other marketed mAbs, with pIs ranging from 6.0 (eculizumab) to 9.22 (tocilizumab).
Subject(s)
Antibodies, Monoclonal , Capillary Isoelectric Focusing , Humans , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Capillary Isoelectric Focusing/methods , Immunoglobulin G/chemistry , Immunoglobulin G/analysis , Isoelectric Point , Reproducibility of Results , Trastuzumab/chemistry , Trastuzumab/analysisABSTRACT
Capillary isoelectric focusing (CIEF) coupled with electrospray ionization mass spectrometry (ESI-MS) is regarded as an outstanding approach for protein and proteoform analysis, combining a high-resolution separation technique and an enhanced detection technique. The few so-far developed CIEF-ESI-MS approaches exhibit limitations regarding sensitivity and separation performance. Here, we report a new generic methodology for CIEF-ESI-MS based on chemical mobilization, leading to highly efficient separation. This new integrated methodology relies on exchanging catholyte, initially introduced in the nanoCEasy interface in the focusing step, with sheath liquid (SL) in order to chemically mobilize the analytes into the ESI-MS system. The CIEF-MS method is evaluated by separation of a peptide set, model proteins, and monoclonal antibody charge variants. The effect of various parameters including master mixture composition, field strength, catholyte, SL composition, focusing time, and capillary conditions is optimized and discussed. Excellent separation performance can be achieved with a pI resolution down to 0.1 pH unit. The mobilization reproducibility is demonstrated with "migration time" RSDs below 10%. Additionally, the chemical mobilization is compared with the pressure assistance-chemical mobilization method, demonstrating that even a small pressure causes a strong decrease in separation performance, which clearly indicates the benefit of the chemical mobilization-based method. The applicability and separation power of the developed method are further exhibited by separation of Fc-conjugated insulins (mass = 62 kDa) differing in only one amino acid.
Subject(s)
Capillary Isoelectric Focusing , Proteins , Spectrometry, Mass, Electrospray Ionization , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Capillary Isoelectric Focusing/methods , Electrophoresis, Capillary/methods , Nanotechnology , Proteins/analysis , Proteins/chemistry , Spectrometry, Mass, Electrospray Ionization/methodsABSTRACT
The multiattribute method (MAM) has emerged as a powerful tool for simultaneously screening multiple product quality attributes of therapeutic antibodies. One such potential critical quality attribute (CQA) is glycation, a common modification that can impact the heterogeneity, functional activity, and immunogenicity of therapeutic antibodies. However, current methods for monitoring glycation levels in MAM are rare and not sufficiently rapid and accurate. In this study, an improved mass spectrometry (MS)-based MAM was developed to simultaneously monitor glycation and other quality attributes including afucosylation. The method was evaluated using two therapeutic antibodies with different glycosylation site numbers. Treatment with IdeS, Endo F2, and dithiothreitol generated three distinct subunits, and the glycation results obtained were similar to those treated with PNGase F, which is routinely used to release glycans; the sample processing time was greatly reduced while providing additional quality attribute information. The MS-based MAM was also employed to assess the glycation progression following forced glycation in various buffer solutions. A significant increase in oxidation was observed when forced glycation was conducted in an ammonium bicarbonate buffer solution, and a total of 23 potential glycation sites and 4 significantly oxidized sites were identified. Notably, we found that ammonium bicarbonate was found to specifically stimulate oxidation, while glycation had a synergistic effect on oxidation. These findings establish this study as a novel methodology for achieving a technologically advanced platform and concept that enhances the efficacy of product development and quality control, characterized by its broad-spectrum, rapid, and accurate nature.
Subject(s)
Mass Spectrometry , Glycosylation , Mass Spectrometry/methods , Oxidation-Reduction , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Antibodies, Monoclonal/metabolism , Tandem Mass Spectrometry/methodsABSTRACT
Early-stage cell line screening is a vital step in developing biosimilars of therapeutic monoclonal antibodies (mAbs). While the quality of the manufactured antibodies is commonly assessed by charge-based separation methods employing UV absorbance detection, these methods lack the ability to identify resolved mAb variants. We evaluated the performance of microfluidic capillary electrophoresis coupled to mass spectrometry (MCE-MS) as a rapid tool for profiling mAb biosimilar candidates from clonal cell lines. A representative originator sample was used to develop the MCE-MS method. The addition of dimethylsulfoxide (DMSO) to the background electrolyte yielded up to 60-fold enhancement of the protein MS signal. The resulting electropherograms consistently provided resolution of mAb charge variants within 10â¯min. Deconvoluted mass spectra facilitated the identification of basic variants such as C-terminal lysine and proline amidation, while the acidic variants could be assigned to deamidated forms. The MCE-MS method also allowed the identification of 18 different glycoforms in biosimilar samples. To mimic early-stage cell line selection, samples from five clonal cell lines that all expressed the same biosimilar candidate mAb were compared to their originator mAb. Based on the similarity observed in charge variants and glycoform profiles acquired by MCE-MS, the most promising candidate could be selected. The MCE-MS method demonstrated good overall reproducibility, as confirmed by a transferability study involving two separate laboratories. This study highlights the efficacy of the MCE-MS method for rapid proteoform screening of clonal cell line samples, underscoring its potential significance as an analytical tool in biosimilar process development.
Subject(s)
Antibodies, Monoclonal , Biosimilar Pharmaceuticals , Electrophoresis, Capillary , Mass Spectrometry , Biosimilar Pharmaceuticals/analysis , Biosimilar Pharmaceuticals/chemistry , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Electrophoresis, Capillary/methods , Mass Spectrometry/methods , Cricetulus , CHO Cells , Animals , Humans , GlycosylationABSTRACT
Protein-based biopharmaceutical drugs, such as monoclonal antibodies, account for the majority of the best-selling drugs globally in recent years. For bioprocesses, key performance indicators are the concentration and aggregate level for the product being produced. In water NMR (wNMR), the use of the water transverse relaxation rate [R2(1H2O)] has been previously used to determine protein concentration and aggregate level; however, it cannot be used to separate between them without using an additional technique. This work shows that it is possible to "decouple" these two key characteristics by recording the water diffusion coefficient [D(1H2O)] in conjunction with R2(1H2O), even in the event of overlap in either D(1H2O) or R2(1H2O). This method is demonstrated on three different systems, following appropriate D(1H2O) or R2(1H2O) calibration data acquisition for a protein of interest. Our method highlights the potential use of benchtop NMR as an at-line process analytical technique.
Subject(s)
Water , Water/chemistry , Diffusion , Nuclear Magnetic Resonance, Biomolecular/methods , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Proteins/analysis , Proteins/chemistry , Protein Aggregates , Magnetic Resonance Spectroscopy/methodsABSTRACT
Poly(butyl methacrylate-co-ethylene dimethacrylate) monolith was in situ prepared in a liquid chromatography capillary column with a 75 µm internal diameter. This monolith offered high permeability (5.3 ± 10-14 m2) and good peak capacity (140 for a 15 cm column length at 300 nl/min with a 20 min gradient time). This is exemplified by its separation ability in reversed mode for subunit analysis of monoclonal antibodies after IdeS digestion (middle-up analysis). The potential of this column was also illustrated for the fast analytical control of therapeutic monoclonal antibodies in standardized infusion bags prepared in advance in a pharmacy department. Linearity analysis revealed the column's capability for accurate quantification analysis of the different dose bandings (in mg) of monoclonal antibodies in <2 min. In addition, lifetime analysis data indicated that the column can be highly reproducible and has a long lifetime with stable and low back pressure. The variations observed on the peak shape and area between unstressed (intact) and stressed monoclonal antibodies indicated that our nano liquid chromatographic method was stability indicating. In addition, using a gradient elution mode, the presence of minor components in the infusion bags was visualized.
Subject(s)
Antibodies, Monoclonal , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Chromatography, Liquid/methods , Reproducibility of Results , Linear Models , Drug Packaging/methods , Nanotechnology/methods , Pharmacy Service, Hospital , Methacrylates/chemistryABSTRACT
The application of Process Analytical Technology (PAT) principles for manufacturing of biotherapeutics proffers the prospect of ensuring consistent product quality along with increased productivity as well as substantial cost and time savings. Although this paradigm shift from a traditional, rather rigid manufacturing model to a more scientific, risk-based approach has been advocated by health authorities for almost two decades, the practical implementation of PAT in the biopharmaceutical industry is still limited by the lack of fit-for-purpose analytical methods. In this regard, most of the proposed spectroscopic techniques are sufficiently fast but exhibit deficiencies in terms of selectivity and sensitivity, while well-established offline methods, such as (ultra-)high-performance liquid chromatography, are generally considered as too slow for this task. To address these reservations, we introduce here a novel online Liquid Chromatography (LC) setup that was specifically designed to enable real-time monitoring of critical product quality attributes during time-sensitive purification operations in downstream processing. Using this online LC solution in combination with fast, purpose-built analytical methods, sampling cycle times between 1.30 and 2.35 min were achieved, without compromising on the ability to resolve and quantify the product variants of interest. The capabilities of our approach are ultimately assessed in three case studies, involving various biotherapeutic modalities, downstream processes and analytical chromatographic separation modes. Altogether, our results highlight the expansive opportunities of online LC based applications to serve as a PAT tool for biopharmaceutical manufacturing.
Subject(s)
Biological Products , Biological Products/analysis , Biological Products/chemistry , Chromatography, High Pressure Liquid/methods , Chromatography, Liquid/methods , Antibodies, Monoclonal/analysis , Antibodies, Monoclonal/chemistryABSTRACT
The development and optimization of Antibody-Drug Conjugates (ADCs) hinge on enhanced analytical and bioanalytical characterization, particularly in assessing critical quality attributes (CQAs). The ADC's potency is largely determined by the average number of drugs attached to the monoclonal antibody (mAb), known as the drug-to-antibody ratio (DAR). Furthermore, the drug load distribution (DLD) influences the therapeutic window of the ADC, defining the range of dosages effective in treating diseases without causing toxic effects. Among CQAs, DAR and DLD are vital; their control is essential for ensuring manufacturing consistency and product quality. Typically, hydrophobic interaction chromatography (HIC) or reversed-phase liquid chromatography (RPLC) with UV detector have been used to quantitate DAR and DLD in quality control (QC) environment. Recently, Native size-exclusion chromatography-mass spectrometry (nSEC-MS) proves the potential as a platformable quantitative method for characterizing DAR and DLD across various cysteine-linked ADCs in research or early preclinical development. In this work, we established and assessed a streamlined nSEC-MS workflow with a benchtop LC-MS platform, to quantitatively monitor DAR and DLD of different chemotype and drug load level cysteine-linked ADCs. Moreover, to deploy this workflow in QC environment, complete method validation was conducted in three independent laboratories, adhering to the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH) Q2(R1) guidelines. The results met the predefined analytical target profile (ATP) and performance criteria, encompassing specificity/selectivity, accuracy, precision, linearity, range, quantification/detection limit, and robustness. Finally, the method validation design offers a reference for other nSEC-MS methods that are potentially used to determine the DAR and DLD on cysteine-linker ADCs. To the best of our knowledge, this study is the first reported systematic validation of the nSEC-MS method for detecting DAR and DLD. The results indicated that the co-validated nSEC-MS workflow is suitable for DAR and DLD routine analysis in ADC quality control, release, and stability testing.
Subject(s)
Chromatography, Gel , Cysteine , Immunoconjugates , Mass Spectrometry , Immunoconjugates/chemistry , Immunoconjugates/analysis , Cysteine/chemistry , Reproducibility of Results , Chromatography, Gel/methods , Mass Spectrometry/methods , Linear Models , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Limit of Detection , Humans , WorkflowABSTRACT
The characterization of proteins and complexes in biological systems is essential to establish their critical properties and to understand their unique functions in a plethora of bioprocesses. However, it is highly difficult to analyze low levels of intact proteins in their native states (especially those exceeding 30 kDa) with liquid chromatography (LC)-mass spectrometry (MS). Herein, we describe for the first time the use of nanoflow ion-exchange chromatography directly coupled with native MS to resolve mixtures of intact proteins. Reference proteins and protein complexes with molecular weights between 10 and 150 kDa and a model cell lysate were separated using a salt-mediated pH gradient method with volatile additives. The method allowed for low detection limits (0.22 pmol of monoclonal antibodies), while proteins presented nondenatured MS (low number of charges and limited charge state distributions), and the oligomeric state of the complexes analyzed was mostly kept. Excellent chromatographic separations including the resolution of different proteoforms of large proteins (>140 kDa) and a peak capacity of 82 in a 30 min gradient were obtained. The proposed setup and workflows show great potential for analyzing diverse proteoforms in native top-down proteomics, opening unprecedented opportunities for clinical studies and other sample-limited applications.
Subject(s)
Mass Spectrometry , Chromatography, Ion Exchange/methods , Mass Spectrometry/methods , Proteins/analysis , Proteins/chemistry , Nanotechnology , Humans , Proteomics/methods , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysisABSTRACT
This paper presents an approach based on triple injection capillary zone electrophoresis for identification of monoclonal antibodies. The analyte to be identified is injected between two zones of a known reference. The distances between the reference zones (plug I and III) and the target zone (plug II) are adjusted by partial electrophoresis of the first and second injection plugs. The full migration time of the target analyte is calculated from the observed migration time by considering the migration times of the reference in the first and third injection plugs. The relative migration time, that is, the ratio between the full migration time of the analyte and the migration time of the reference in the third injection plug provides the basis for identification. Here, eight monoclonal antibodies, including a pair of biosimilars, were used interchangeably as both analyte and reference to investigate potential of the method. The relative migration time for a preliminary positive identification were found to vary between 0.994 and 1.006 (1.000 ± 0.006, p = 95%). Beside the relative migration time, isoform distribution, peak profiles, and early migrating peaks, originating from components in the pharmaceutical formulations, were successfully used to verify the identity of all tested monoclonal antibodies.
Subject(s)
Antibodies, Monoclonal , Electrophoresis, Capillary , Antibodies, Monoclonal/analysis , Antibodies, Monoclonal/chemistryABSTRACT
While automated peak detection functionalities are available in commercially accessible software, achieving optimal true positive rates frequently necessitates visual inspection and manual adjustments. In the initial phase of this study, hetero-variants (glycoforms) of a monoclonal antibody were distinguished using liquid chromatography-mass spectrometry, revealing discernible peaks at the intact level. To comprehensively identify each peak (hetero-variant) in the intact-level analysis, a deep learning approach utilizing convolutional neural networks (CNNs) was employed in the subsequent phase of the study. In the current case study, utilizing conventional software for peak identification, five peaks were detected using a 0.5 threshold, whereas seven peaks were identified using the CNN model. The model exhibited strong performance with a probability area under the curve (AUC) of 0.9949, surpassing that of partial least squares discriminant analysis (PLS-DA) (probability AUC of 0.8041), and locally weighted regression (LWR) (probability AUC of 0.6885) on the data acquired during experimentation in real-time. The AUC of the receiver operating characteristic curve also illustrated the superior performance of the CNN over PLS-DA and LWR.
Subject(s)
Deep Learning , Antibodies, Monoclonal/analysis , Antibodies, Monoclonal/chemistry , Chromatography, Liquid , Mass Spectrometry , Least-Squares Analysis , Neural Networks, Computer , Discriminant AnalysisABSTRACT
Robust monitoring of heterogeneity in biopharmaceutical development is crucial for producing safe and efficacious biotherapeutic products. Multiattribute monitoring (MAM) has emerged as an efficient tool for monitoring of mAb heterogeneities like deamidation, sialylation, glycosylation, and oxidation. Conventional biopharma analysis during mAb development relies on use of one-dimensional methods for monitoring titer and charge-based heterogeneity using non-volatile solvents without direct coupling with mass spectrometry (MS). This approach requires analysis of mAb harvest by ProA for titer estimation followed by separate cation exchange chromatography (CEX) analysis of the purified sample for estimating charge-based heterogeneity. This can take up to 60-90 min due to the required fraction collection and buffer exchange steps. In this work, a native two-dimensional liquid chromatography (2DLC) mass spectrometry method has been developed with Protein A chromatography in the first dimension for titer estimation and cation exchange chromatography (CEX) in the second dimension for charge variant analysis. The method uses volatile salts for both dimensions and enables easy coupling to MS. The proposed 2DLC method exhibits a charge variant profile that is similar to that observed via the traditional methods and takes only 15 min for mass identification of each variant. A total of six charge variants were separated by the CEX analysis after titer estimation, including linearity assessment from 5 µg to 160 µg of injected mAb sample. The proposed method successfully estimated charge variants for the mAb innovator and 4 of its biosimilars, showcasing its applicability for biosimilarity exercises. Hence, the 2D ProA CEX MS method allows direct titer and charge variant estimation of mAbs in a single workflow.
Subject(s)
Antibodies, Monoclonal , Cricetulus , Mass Spectrometry , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Mass Spectrometry/methods , Animals , Chromatography, Ion Exchange/methods , CHO Cells , Cell Culture TechniquesABSTRACT
This work presents the application of AQbD principles to the development of a size exclusion chromatography (SEC) HPLC procedure for the determination of monoclonal antibody (mAb) product purity using state-of-the-art column technology available via the Waters™ XBridge Premier Protein SEC column. Analytical Quality by Design (AQbD) emphasizes a systematic, risk-based lifecycle approach to analytical procedure development based on sound statistical methodologies. It has recently become increasingly recommended by regulatory agencies as a response to the need for greater efficiency, improved reliability, and increased robustness among modern analytical procedures in the pharmaceutical industry. Use of an Analytical Target Profile (ATP) and formal risk assessments informed the application of Design of Experiments (DoE) to optimize this analytical procedure, as well as assess its robustness and ruggedness. Importantly, our ruggedness results demonstrated the transferability of this procedure between two laboratories within the Catalent Biologics Global Network. Application of this analytical procedure as a platform approach for evaluating mAb purity is expected to support expedited, first-in-human timelines of mAb molecules by enabling great quantitative performance with simple mobile phase buffer compositions. Taken together, this case study demonstrates the utility of adopting AQbD principles in analytical procedure development.
Subject(s)
Antibodies, Monoclonal , Chromatography, Gel , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Chromatography, High Pressure Liquid/methods , Chromatography, Gel/methods , Reproducibility of Results , Quality Control , Humans , Research Design , Drug Contamination/prevention & controlABSTRACT
Currently, glycopeptide quantitation is mainly based on relative quantitation due to absolute quantitation requiring isotope-labeled or standard glycopeptides which may not be commercially available or are very costly and time consuming to synthesize. To address this grand challenge, coulometric mass spectrometry (CMS), based on the combination of electrochemistry (EC) and mass spectrometry (MS), was utilized to quantify electrochemically active glycopeptides without the need of using standard materials. In this study, we studied tyrosine-containing glycopeptides, NYIVGQPSS(ß-GlcNAc)TGNL-OH and NYSVPSS(ß-GlcNAc)TGNL-OH, and successfully quantified them directly with CMS with a discrepancy of less than 5% between the CMS measured amount and the theoretical amount. Taking one step further, we applied this approach to quantify glycopeptides generated from the digestion of NIST mAb, a monoclonal antibody reference material. Through HILIC column separation, five N297 glycopeptides resulting from NIST mAb tryptic digestion were successfully separated and quantified by CMS for an absolute amount without the use of any standard materials. This study indicates the potential utility of CMS for quantitative proteomics research.
Subject(s)
Glycopeptides , Mass Spectrometry , Oxidation-Reduction , Glycopeptides/analysis , Glycopeptides/chemistry , Mass Spectrometry/methods , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Proteomics/methods , Proteomics/standards , Tyrosine/analysis , Tyrosine/chemistry , Electrochemical Techniques/methodsABSTRACT
The number of therapeutic monoclonal antibodies (mAbs) is growing rapidly due to their widespread use for treating various diseases and health conditions. Assessing the glycosylation profile of mAbs during production is essential to ensuring their safety and efficacy. This research aims to rapidly isolate and digest mAbs for liquid chromatography-tandem mass spectrometry (LC-MS/MS) identification of glycans and monitoring of glycosylation patterns, potentially during manufacturing. Immobilization of an Fc region-specific ligand, oFc20, in a porous membrane enables the enrichment of mAbs from cell culture supernatant and efficient elution with an acidic solution. Subsequent digestion of the mAb eluate occurred in a pepsin-modified membrane within 5 min. The procedure does not require alkylation and desalting, greatly shortening the sample preparation time. Subsequent LC-MS/MS analysis identified 11 major mAb N-glycan proteoforms and assessed the relative peak areas of the glycosylated peptides. This approach is suitable for the glycosylation profiling of various human IgG mAbs, including biosimilars and different IgG subclasses. The total time required for this workflow is less than 2 h, whereas the conventional enzymatic release and labeling of glycans can take much longer. Thus, the integrated membranes are suitable for facilitating the analysis of mAb glycosylation patterns.
Subject(s)
Antibodies, Monoclonal , Tandem Mass Spectrometry , Glycosylation , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Humans , Polysaccharides/analysis , Polysaccharides/chemistry , Chromatography, Liquid , Pepsin A/metabolism , Pepsin A/chemistry , Immunoglobulin G/chemistry , Immunoglobulin G/metabolism , Animals , Membranes, ArtificialABSTRACT
The 21st century has been particularly productive for the biopharmaceutical industry, with the introduction of several classes of innovative therapeutics, such as monoclonal antibodies and related compounds, gene therapy products, and RNA-based modalities. All these new molecules are susceptible to aggregation and fragmentation, which necessitates a size variant analysis for their comprehensive characterization. Size exclusion chromatography (SEC) is one of the reference techniques that can be applied. The analytical techniques for mAbs are now well established and some of them are now emerging for the newer modalities. In this context, the objective of this review article is: i) to provide a short historical background on SEC, ii) to suggest some clear guidelines on the selection of packing material and mobile phase for successful method development in modern SEC; and iii) to highlight recent advances in SEC, such as the use of narrow-bore and micro-bore columns, ultra-wide pore columns, and low-adsorption column hardware. Some important innovations, such as recycling SEC, the coupling of SEC with mass spectrometry, and the use of alternative detectors such as charge detection mass spectrometry and mass photometry are also described. In addition, this review discusses the use of SEC in multidimensional setups and shows some of the most recent advances at the preparative scale. In the third part of the article, the possibility of SEC for the characterization of new modalities is also reviewed. The final objective of this review is to provide a clear summary of opportunities and limitations of SEC for the analysis of different biopharmaceutical products.
Subject(s)
Chromatography, Gel , Liposomes , Nanoparticles , Chromatography, Gel/methods , Nanoparticles/chemistry , Biological Products/analysis , Biological Products/chemistry , Nucleic Acids/analysis , Genetic Vectors , Antibodies, Monoclonal/chemistry , Antibodies, Monoclonal/analysis , Antibodies, Monoclonal/isolation & purification , Proteins/analysis , Proteins/chemistry , Humans , Lipids/chemistry , Lipids/analysis , Mass Spectrometry/methodsABSTRACT
Potency assays are essential for the development and quality control of biopharmaceutical drugs, but they are often a time limiting factor due to manual handling steps and consequently low analytical throughput. On the other hand, automation of potency assays can be challenging due to their complexity and the use of biological materials. ELISA (enzyme-linked immunosorbent assay) is widely used for potency determination and is a good candidate for automation as all ELISA types depend on the same basic steps: coating, blocking, sample incubation, detection, and signal measurement. Nevertheless, ELISA for relative potency measurements still require drug-specific development and assay validation thereby complicating automation efforts. To simplify potency testing by ELISA, we first developed a manual protocol generally applicable to different drugs and then adapted this protocol for automated measurements. We identified unexpected critical parameters which had to be adapted to transfer the manual ELISA to an automated liquid handling system and we demonstrated that gravimetric sample dilution is unnecessary with the automated protocol. Both manual and automated protocols were validated and compared using multiple biotherapeutics. The automated protocol showed similar or higher precision and accuracy when compared to the manual method.
Subject(s)
Enzyme-Linked Immunosorbent Assay , Enzyme-Linked Immunosorbent Assay/methods , Automation , Immunoglobulin Fragments , Antibodies, Monoclonal/analysis , Antibodies, Monoclonal/chemistry , Reproducibility of Results , Humans , Automation, Laboratory/methods , Quality ControlABSTRACT
Introducción: el tratamiento del cáncer supone uno de los grandes desafíos a los que se enfrenta la sociedad cien-tífica actual. En esta lucha sanitaria, se desarrollan los anticuerpos conjugados a fármacos, capaces de lograr la muerte celular mediante el transporte y liberación de compuestos citotóxicos selectivamente sobre células tumorales. Se componen de un anticuerpo monoclonal (de naturaleza proteica) unido a un fármaco citotóxico (de carácter lipófilo) mediante un enlazador. Las formulaciones se han de diseñar para mantener dicha unión durante su almacenamiento y administración. Objetivo: identificar los medicamentos comercializados en España cuyo principio activo es un anticuerpo conjugado a fármaco, estudiando diferentes aspectos tecnofarmacéuticos, en especial los componentes de sus formulaciones. Método: dado que este tipo de medicamento pertenece al grupo ATC L01F, han sido identificados a través del bus-cador de la Agencia Española de Medicamentos y Productos Sanitarios. La consulta de sus fichas técnicas, artículos de revisión e investigación relacionados con el tema así como el Handbook of Pharmaceuticals Excipients, ha permitido realizar el estudio tecnofarmacéutico. Resultados: se han analizado distintos aspectos tecnofarmacéuticos: forma farmacéutica, vía de administración, conservación y, en especial, sus formulaciones. Se ha estudiado en profundidad la naturaleza del principio activo y los requisitos de las formulaciones en base a sus características. Conclusiones: los ocho anticuerpos conjugados a fármacos aprobados en España se presentan en forma de polvo liofilizado en vial que se deben almacenar entre 2-8 ºC. Para su administración, se reconstituyen obteniéndose inicialmente un concentrado, que posteriormente se diluye y administra en forma de perfusión intravenosa o goteo. Su formulación tipo incluye un lioprotector, un antiagregante, un regulador del pH y eventualmente antioxidantes o reductores de la viscosidad. (AU)
Introduction: cancer treatment is one of the great challenges facing todays scientific society. In this health fight, drug-conjugated antibodies (ADCs) are being developed, drugs capable of causing cell death by transporting and releasing cytotoxic compounds into tumor cells. They are composed of a monoclonal antibody (of protein nature) linked to a cytotoxic drug (of lipophilic character) through a linker. Formulations must be designed to maintain this binding during storage and administration.Objective: identify the medicines marketed in Spain whose active ingredient is an antibody-drug conjugate, studying techno pharmaceutical aspects, especially the components of their formulations. Method: since this type of drugs belongs to the ATC group L01F, they have been identified through the search engine of the Spanish Agency of Medicines and Health Products. The search for their technical sheets, along with articles of review and research related to the topic, as well as the Handbook of Pharmaceuticals Excipients, has enabled the execution of the techno pharmaceutical study.the formulation of the tested conjugates to drugs marketed in Spain belonging to the ATC L01F group corresponding to monoclonal antibodies and tested conjugated to drugs identified through the search engine of the Spanish Agency of Medicines and Health Products has been studied. Results: different aspects of this group of drugs have been analyzed, such as the pharmaceutical form, the route of administration, conservation and especially the techno pharmaceutical formulation. The nature of the active ingredient and the requirements of the formulations based on their characteristics have been studied in depth. Conclusions: the eight antibody-drug conjugates approved in Spain are presented in the form of lyophilized powder in a vial and should be stored between 2-8 ºC... (AU)
Subject(s)
Antibodies, Monoclonal/administration & dosage , Antibodies, Monoclonal/analysis , Antibodies, Monoclonal/pharmacology , Immunoconjugates/administration & dosage , Immunoconjugates/analysis , Immunoconjugates/pharmacology , Drug Compounding , SpainABSTRACT
Therapeutic mAbs show a specific "charge fingerprint" that may affect safety and efficacy, and, as such, it is often identified as a critical quality attribute (CQA). Capillary iso-electric focusing (cIEF), commonly used for the evaluation of such CQA, provides an analytical tool to investigate mAb purity and identity across the product lifecycle. Here, we discuss the results of an analysis of a panel of antibody products by conventional and whole-column imaging cIEF systems performed as part of European Pharmacopoeia activities related to development of "horizontal standards" for the quality control of monoclonal antibodies (mAbs). The study aimed at designing and verifying an independent and transversal cIEF procedure for the reliable analysis of mAbs charge variants. Despite the use of comparable experimental conditions, discrepancies in the charge profile and measured isoelectric points emerged between the two cIEF systems. These data suggest that the results are method-dependent rather than absolute, an aspect known to experts in the field and pharmaceutical industry, but not suitably documented in the literature. Critical implications from analytical and regulatory perspectives, are herein thoughtfully discussed, with a special focus on the context of market surveillance and identification of falsified medicines.
Subject(s)
Antibodies, Monoclonal , Electrophoresis, Capillary , Antibodies, Monoclonal/therapeutic use , Antibodies, Monoclonal/analysis , Isoelectric Focusing/methods , Electrophoresis, Capillary/methods , Isoelectric Point , Quality ControlABSTRACT
The analysis of mixtures containing monoclonal antibody (mAb) (approximately 150 kDa molecular weight) and sub-unit impurities (approximately 100 kDa) is challenging, even when adopting the latest ultra-high-pressure liquid chromatography (UHPLC) columns (4.6 mm [Formula: see text] 150 mm coated hardware, 1.7 [Formula: see text]m 250 BEH[Formula: see text] Surface-modified Particles) and systems (ACQUITY[Formula: see text] UPLC[Formula: see text] I-class Bio Plus). The main issue still encountered is a persistent tail of the mAb peak. Here, the physical origin(s) of such peak tailing in size-exclusion chromatography (SEC) are investigated from both fundamental and practical approaches. Up to five relevant physical origins are analyzed: sample heterogeneity (glycoforms), UHPLC system dispersion, strong residual binding of the mAb to the SEC particles (via hydrophobic and/or electrostatic interactions) and to the stainless steel column/system hardware, slow escape kinetics of the mAb from the SEC particles, and flow heterogeneity caused by the non-ideal slurry packing of SEC columns. Experiments (testing sample heterogeneity, system dispersion, and strong residual interactions) and calculations (predicting the transient absorption/escape kinetics in a single SEC particle and the two-dimensional peak concentration profiles) altogether unambiguously demonstrate that the observed mAb peak tailing is caused primarily by the long-range velocity biases across the SEC column combined with the slow transverse dispersion of mAbs. Therefore, improvement in the resolution between mAb and sub-unit fragment impurities can only be achieved by increasing the column length, e.g., by applying recycling chromatography at acceptable pressures.