Cranioplasty in Oman: Retrospective review of cases from the National Craniofacial Center 2012-2022.

Objectives: Cranioplasty is a complex craniofacial and neurosurgical procedure that aims to reinstate the architecture of the cranial vault and elevate both its aesthetic and neurological function. Several reconstructive materials have been thoroughly explored in the search for the optimal solution for cranioplasty. This study aimed to evaluate different material used for cranial reconstruction in Oman. Methods: This retrospective study included all patients who had had cranioplasty procedures performed at Khoula Hospital, Muscat, Oman, from 2012 to 2022. Demographic information, the characteristics of the cranial defect and any complications that occurred post-operatively were analysed. Results: A total of 47 patients were included in this study. The most common cause of cranial defects was craniectomy following traumatic head injury (70.2%) along with excision of fibrous dysplasia (10.6%). The most frequently utilised material for cranial repair was autologous bone grafts (n = 28), followed by polyetheretherketone (PEEK; n = 14). Interestingly, the replacement of bone grafts from previous craniectomy showed a notably high resorption rate (71.4%), in contrast to split calvarial grafts (0%) and other types of bone grafts (14.3%). Additionally, delayed graft infection was observed in 3.6% of the bone graft group and 7.1% of the PEEK group. Conclusion: Patient-specific alloplastic implants such as PEEK have gained popularity for large and complex cranioplasty, as they provide excellent aesthetic outcomes and leave no donor site morbidity. In contrast, bone grafts remain the gold standard for small to medium-sized cranial defects.

A review of 10 patients treated with the masquelet technique and microsurgical technique combined for Gustilo type III open tibial fractures.

BACKGROUND: Open tibial fractures often include severe bone loss and soft tissue defects and requires complex reconstructive operations. However, the optimal treatment is unclear. METHODS: This retrospective study enrolled patients with Gustilo type III open tibial fractures from January 2018 to January 2021 to assess the clinical utility of Masquelet technique together with microsurgical technique as a combined strategy for the treatment of open tibial fractures. The demographics and clinical outcomes including bone union time, infection, nonunion and other complications were recorded for analysis. The bone recovery quality was evaluated by the AOFAS Ankle-Hindfoot Scale score and the Paley criteria. RESULTS: We enrolled 10 patients, the mean age of the patients and length of bone defects were 31.7 years (range, 23-45 years) and 7.5 cm (range, 4.5-10 cm) respectively. Bone union was achieved for all patients, with an average healing time of 12.2 months (range, 11-16 months). Seven patients exhibited a bone healing time of less than 12 months, whereas 3 patients exhibited a bone healing time exceeding 12 months. No significant correlation was found between the length of bone loss and healing time. In addition, no deep infection or nonunion was observed, although 2 patients experienced wound fat liquefaction with exudates and 1 patient presented with a bloated skin flap. The average AOFAS Ankle-Hindfoot Scale score was 80.5 (range, 74-85), and all patients were evaluated as good or exellent based on the Paley criteria. CONCLUSIONS: Our study indicated that the use of the Masquelet technique and the microsurgical technique as a combined strategy is safe and effective for the treatment of Gustilo type III open tibial fractures.

Impact of surgical risk factors for non-union on lumbar spinal fusion outcomes using cellular bone allograft at 24-months follow-up.

BACKGROUND: The current report investigates fusion rates and patient-reported outcomes following lumbar spinal surgery using cellular bone allograft (CBA) in patients with risk factors for non-union. METHODS: A prospective, open label study was conducted in subjects undergoing lumbar spinal fusion with CBA (NCT02969616) to assess fusion success rates and patient-reported outcomes in subjects with risk factors for non-union. Subjects were categorized into low-risk (≤ 1 risk factors) and high-risk (> 1 risk factors) groups. Radiographic fusion status was evaluated by an independent review of dynamic radiographs and CT scans. Patient-reported outcome measures included quality of life (EQ-5D), Oswestry Disability Index (ODI) and Visual Analog Scales (VAS) for back and leg pain. Adverse event reporting was conducted throughout 24-months of follow-up. RESULTS: A total of 274 subjects were enrolled: 140 subjects (51.1%) were categorized into the high-risk group (> 1 risk factor) and 134 subjects (48.9%) into the low-risk group (≤ 1 risk factors). The overall mean age at screening was 58.8 years (SD 12.5) with a higher distribution of females (63.1%) than males (36.9%). No statistical difference in fusion rates were observed between the low-risk (90.0%) and high-risk (93.9%) groups (p > 0.05). A statistically significant improvement in patient-reported outcomes (EQ-5D, ODI and VAS) was observed at all time points (p < 0.05) in both low and high-risk groups. The low-risk group showed enhanced improvement at multiple timepoints in EQ-5D, ODI, VAS-Back pain and VAS-Leg pain scores compared to the high-risk group (p < 0.05). The number of AEs were similar among risk groups. CONCLUSIONS: This study demonstrates high fusion rates following lumbar spinal surgery using CBA, regardless of associated risk factors. Patient reported outcomes and fusion rates were not adversely affected by risk factor profiles. TRIAL REGISTRATION: NCT02969616 (21/11/2016).

Reconstruction of the Medial Malleolus With Iliac Crest Autograft After Traumatic Loss: A Case Report.

CASE: A 19-year-old woman sustained an open ankle fracture with complete destruction of the left medial malleolus and significant soft-tissue loss. After temporizing external fixation and coverage with a rotational posterior tibial artery perforator flap, the medial malleolus was reconstructed with an autologous iliac crest bone graft and direct repair of the deltoid ligament. The patient achieved excellent improvement in functional outcomes at 21 months with adequate restoration of ankle motion. CONCLUSION: This case shows reconstruction of the medial malleolus with autologous iliac crest bone graft after traumatic loss can be a viable treatment option for young patients.

Comparative Studies of Bone Graft and Orthobiologics for Foot Ankle Arthrodesis: A Critical Review.

Graft materials available to supplement hindfoot and ankle arthrodesis procedures include autologous (autograft) or allogeneic bone graft (allograft) but also bone graft substitutes such as demineralized bone matrix, calcium sulfate, calcium phosphate, and tricalcium phosphate/hydroxyapatite. In addition, biologic agents, such as recombinant human bone morphogenetic protein-2 or recombinant human platelet derived growth factor-BB (rhPDGF-BB), and preparations, including platelet-rich plasma or concentrated bone marrow aspirate, have been used to facilitate bone healing in ankle or hindfoot arthrodesis. The purpose of this review was to summarize the available clinical evidence surrounding the utilization and efficacy of the above materials and biological agents in ankle or hindfoot arthrodesis procedures, with emphasis on the quality of the existing evidence to facilitate clinical decision making.

3D-printed customised titanium mesh and bone ring technique for bone augmentation of combined bone defects in the aesthetic zone.

PURPOSE: Complex bone defects with a horizontal and vertical combined deficiency pose a clinical challenge in implant dentistry. This study reports the case of a young female patient who presented with a perforating bone defect in the aesthetic zone. MATERIALS AND METHODS: Based on prosthetically guided bone regeneration, virtual 3D bone augmentation was planned. A 3D printed customised titanium mesh and the autogenous bone ring technique were then utilised simultaneously to achieve a customised bone contour. After 6 months, the titanium mesh was removed and connective tissue grafting was performed. Finally, implants were placed and the provisional and definitive prostheses were delivered following a digital approach. Vertical and horizontal bone gain, new bone density, pseudo-periosteum type and marginal bone loss were measured. Planned bone volume, regenerated bone volume and regeneration rate were analysed. RESULTS: Staged tooth shortening led to a coronal increase in keratinised mucosa. The customised titanium mesh and bone ring technique yielded 14.27 mm vertical bone gain and 12.9 mm horizontal bone gain in the perforating area. When the titanium mesh was removed, the reopening surgery showed a Type 1 pseudo-periosteum (none or < 1 mm), and CBCT scans revealed a new bone density of ~550 HU. With a planned bone volume of 1063.55 mm3, the regenerated bone volume was 969.29 mm3, indicating a regeneration rate of 91.14%. The 1-year follow-up after definitive restoration revealed no complications except for 0.55 to 0.60 mm marginal bone loss. CONCLUSION: Combined application of customised titanium mesh and an autogenous bone ring block shows promising potential to achieve prosthetically guided bone regeneration for complex bone defects in the aesthetic zone.

Maxillary sinus opacification after surgery in asymptomatic patients: Transient swelling of the sinus mucosa or graft dispersion into the maxillary sinus. A radiographic report of three cases after a follow-up period of at least 5 years.

Maxillary sinus grafting is a predictable regenerative technique to facilitate maxillary posterior implant placement when there is insufficient vertical bone height inferior to the maxillary sinuses to allow placement of implants of adequate dimensions. It enables an increase in vertical bone height, which makes implant placement easier. Maxillary sinus mucosal membrane perforation is one of the most common intraoperative complications during maxillary sinus grafting and may result in extrusion of graft material into the sinus. When this occurs, the mucociliary function of the maxillary sinus may expel the extruded graft material through its natural ostium, though graft particles may remain in the sinus or possibly occlude the natural ostium. After grafting, transient maxillary sinus mucosal oedema may occur. A postoperative CBCT scan may reveal varying degrees of sinus opacification, namely partial, subtotal or total. Although it is always possible to identify graft material, which may enter the sinus as a result of membrane perforation that might not even be visible to the implantologist during the surgical procedure, it is challenging to assess whether sinus opacification is due to mucosal thickening or mucus accumulation. The aim of the present case series was to offer a pragmatic approach to managing asymptomatic patients whose CBCT scans demonstrated partial, subtotal or total maxillary sinus opacification with bone graft particles that seemed to have been extruded into the sinus.

Implant stability and clinical outcome between implant placement using internal sinus floor elevation with alloplastic bone material grafting and without grafting: A 1-year randomized clinical trial.

OBJECTIVE: To compare implant stability and clinical outcome in implant placement between osteotome sinus floor elevation (OSFE) with biphasic calcium phosphate (BCP) which consisted of 30% of hydroxyapatite (HA) and 70% of beta-tricalcium phosphate (ß -TCP) grafting material and OSFE without using bone grafting material. The research questions is whether the BCP provides any benefit in OSFE or not. MATERIALS AND METHODS: Thirty patients (30 implants) with a single edentulous area of upper premolar or molar were randomly separated into OSFE with BCP (n = 15) and OSFE without grafting (n = 15). The patients were reevaluated 3, 6, 9, and 12 months after implant loading. The clinical assessments (implant stability quotient (ISQ), implant survival-failure rate, and surgical complication) were analyzed. Together with radiographic assessments in 2D (endo-sinus bone gain (ESBG), mean marginal bone change (MMBC)) and 3D (endo-sinus bone gain in CBCT (ESBG-CT)) were evaluated, with a mean follow-up time of at least 12 months of functional loading and prosthetic complication. RESULTS: 20 remaining implants (OSFE with BCP, n = 10; OSFE without grafting, n = 10) were analyzed. Mean ISQ was 79.18 ± 3.43 in 1-year follow-up (ISQ; OSFE with BCP = 78.72 ± 3.46, OSFE without grafting = 79.65 ± 3.52). ISQ in both groups increased steadily without significant differences in each follow-up. (p = 0.56). In radiographic evaluation, at 6-, 9-, and 12-month, OSFE without grafting group showed statistically significant lower MMBC (p < 0.05). The 1-year clinical results showed that 2 implants failed in OSFE with BCP, and 1 implant failed in OSFE without grafting. CONCLUSIONS: Graft material "BCP" (HA30:TCP70) coupled with OSFE presents no extraordinary benefit in implant stability, clinical and radiographic outcome in 1-year follow-up. CLINICAL RELEVANCE: Clinically, OSFE with grafting materials provides no additional benefit. CLINICAL TRIAL REGISTRATION NUMBER: TCTR20210517008 (date of registration: May 17, 2021).

Characterization of an advanced bone graft material with a nanocrystalline hydroxycarbanoapatite surface and dual phase composition.

The bone formation response of ceramic bone graft materials can be improved by modifying the material's surface and composition. A unique dual-phase ceramic bone graft material with a nanocrystalline, hydroxycarbanoapatite (HCA) surface and a calcium carbonate core (TrelCor®-Biogennix, Irvine, CA) was characterized through a variety of analytical methods. Scanning electron microscopy (SEM) of the TrelCor surface (magnification 100-100,000X) clearly demonstrated a nanosized crystalline structure covering the entire surface. The surface morphology showed a hierarchical structure that included micron-sized spherulites fully covered by plate-like nanocrystals (<60 nm in thickness). Chemical and physical characterization of the material using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscopy Energy Dispersive X-ray Spectroscopy (SEM-EDX) showed a surface composed of HCA. Analysis of fractured samples confirmed the dual-phase composition with the presence of a calcium carbonate core and HCA surface. An in vitro bioactivity study was conducted to evaluate whether TrelCor would form a bioactive layer when immersed in simulated body fluid. This response was compared to a known bioactive material (45S5 bioactive glass - Bioglass). Following 14-days of immersion, surface and cross-sectional analysis via SEM-EDX showed that the TrelCor material elicited a bioactive response with the formation of a bioactive layer that was qualitatively thicker than the layer that formed on Bioglass. An in vivo sheep muscle pouch model was also conducted to evaluate the ability of the material to stimulate an ectopic, cellular bone formation response. Results were compared against Bioglass and a first-generation calcium phosphate ceramic that lacked a nanocrystalline surface. Histology and histomorphometric analysis (HMA) confirmed that the TrelCor nanocrystalline HCA surface stimulated a bone formation response in muscle (avg. 11% bone area) that was significantly greater than Bioglass (3%) and the smooth surface calcium phosphate ceramic (0%).

[Topographic study of the parietal region for the elaboration of revascularized cranium vault autograft]. / Izuchenie topografo-anatomicheskikh osobennostei temennoi oblasti pri razrabotke revaskulyariziruemogo kostno-fastsial'nogo temennogo autotransplantata.

OBJECTIVE: Topographic and blood vessel architecture study of the parietal area and distal regional pool of the superficial temporal artery (STA) to assess the possibility of revascularized cranium vault bone autograft formation. MATERIAL AND METHODS: For the topographic and anatomical study, 30 non-fixed corpses (17 male and 13 female) were selected, the average age of which was 59±5 years. In the anamnesis and catamnesis, there were no indications of trauma or other pathology of the head and neck, including vascular. STA was contrasted with a non-radiocontrast dye (brilliant green) with the introduction of the dye into the STA with preliminary ligation of the frontal branch of the STA. The area of blood supply to soft tissue and bone structures was studied. The angioarchitectonics of the parietal region was studied, the feeding vessel of the studied flap was identified. RESULTS: The obtained anatomical landmarks for the collection of CPFP flap make it possible to form a flap with high accuracy and minimize the morbidity of the donor area.

[Reparative potential of bone tissue and associated influencing factors]. / Reparativnyi potentsial kostnoi tkani i vliyayushchie na nego faktory.

OBJECTIVE: The aim of the sthudy. To study the influence of general and local factors on the regenerative potential of bone tissue to optimize augmentation mechanisms in the treatment of jaw atrophy. MATERIALS AND METHODS: The influence of general and local factors on the regenerative potential of the bone during the augmentation operation of the alveolar process (part) of the jaw in 68 patients was studied. The survival rate of dental implants and the incidence of complications after completion of dental rehabilitation in the long-term follow-up period (more than 5 years) were evaluated. 18 indicators were studied, which were evaluated by qualitative and quantitative methods. The study of the effect of indicators on regeneration was carried out using an accurate Fischer test for conjugacy tables. The assessment of the strength of the influence was calculated as the ratio of the chances of developing an unfavorable outcome of bone grafting and dental implantation. RESULTS: He highest chances of developing adverse outcomes were found in smoking patients with diabetes mellitus, high body mass index, low survival of bone walls, severe bone atrophy (5.6 and higher class according to Cawood & Howell), three-dimensional bone defect, in the absence of 3 or more bone walls, the presence of subcompensated and decompensated psychological state the patient. In the course of histological examination, the influence of these factors on the mechanisms of reparative osteogenesis morphologically manifested a lower degree of progress of regenerative processes and a lower degree of maturity of bone tissue. CONCLUSION: To reduce the chances of developing an unfavorable outcome, in the presence of negative general and local factors, it is not advisable to use dental implantation simultaneously with bone augmentation procedures. In order to reduce the pathophysiological impact of negative factors during sinus lifting, increase the proportion of autosteal material for potentiating the metabolic activity of bone tissue, as well as prescribe antioxidant, antihypoxant and membrane stabilizing therapy before surgery and in the early postoperative period.

Sequential free fibula transfers: Quality of life and systematic review.

BACKGROUND: Successive osteoseptocutaneous fibula transfers for jaws reconstruction are rare but important options. This study contributes patient-reported and clinical outcomes, as well as systematically reviews all existing reports. METHODS: All sequential fibula transfers performed by the senior author were reviewed from a prospectively managed database, including University of Washington quality of life (UWQoL). Systematic review was conducted in PubMed and Cochrane databases for similar publications. RESULTS: Eighteen patients (average age 51.5 years) received sequential fibulas (mean 4.7 years between reconstructions). Secondary fibulas more often had benign indications (72.2% vs. 33.3%, p = .04), most commonly osteoradionecrosis (38.9%). At a mean follow-up of 30.5 months, the average interincisal distance increased from 21.8 to 27.6 mm, and 92.3% tolerated an oral diet following the second fibula. Eight patients completed the UW-QoL before and after the second fibula, and three prior to the first fibula. Composite physical function was significantly decreased from 96.7 prefibula reconstruction to 63.3 following the first (p < .001) and 64.2 after the second fibula (p < .001). There were no differences in other domains. The systematic review yielded six articles reporting 56 patients (mean 39 months between fibulas). Secondary fibulas were performed for repeat malignancy (45%) and osteoreadionecrosis (39%), resulting in elevated tube feeding from 20% following the first to 39% following the second, but overall high quality of life in two studies. CONCLUSIONS: Sequential osteoseptocutaneous fibula reconstructions of jaws are often performed for benign indications such as osteoradionecrosis. Overall function and QoL are comparable with those following the first fibula transfer.

Analysis of the effect on costochondral graft for TMJ ankylosis with jaw deformities in pediatrics.

OBJECTIVES: To evaluate the effects of costochondral grafting (CCG) used for temporomandibular joint ankylosis (TMJA) in growing patients. MATERIALS AND METHODS: Pediatric patients with TMJA treated by CCG from 2010.5 to 2021.7 were included in the study. CT scans were performed before and after operations with at least 1 year follow-up. The height of the mandibular ramus, menton deviation or retraction, osteotomy gap, etc. were measured by ProPlan CMF1.4 software. CCG growth, resorption, and relapse were evaluated and analyzed with influencing factors such as age, ostectomy gap, etc. by generalized estimating equation. RESULTS: There were 24 patients (29 joints) with an average age of 6.30 ± 3.13 years in the study. After operation, the mandibular ramus was elongated by 5.97 ± 3.53 mm. Mandibular deviation or retrusion was corrected by 4.82 ± 2.84 mm and 3.76 ± 2.97 mm respectively. After a mean follow-up of 38.91 ± 29.20 months, 58.62% CCG grew (4.18 ± 7.70 mm), 20.69% absorbed (2.23 ± 1.16 mm), and 20.69% re-ankylosed. The re-ankylosis was negatively correlated with the osteotomy gap (OR:0.348,0.172-0.702 95%CI, critical value = 6.10 mm). CCG resorption was positively correlated with the distance of CCG ramus elongation (OR:3.353,1.173-9.586 95%CI, critical value = 7.40 mm). CONCLUSIONS: An adequate osteotomy gap and CCG ramus elongation distance are the key factors for successful treatment of TMJA with jaw deformities in growing patients. CLINICAL RELEVANCE: TMJA affects mouth opening and jaw development in pediatric patients. The most common autogenous bone graft for pediatric patients is CCG due to its growth potential, convenient access and easy contouring. Also, it can simultaneously reconstruct the TMJ and improve jaw deformity by lengthening the mandibular ramus. But the growth of CCG is unpredictable. In this study, we explored several factors that may affect the absorption and re-ankylosis of CCG, expecting to provide several suggestions to improve future CCG treatment.

The influence of connective tissue grafting on the reconstruction of a missing facial bone wall using immediate implant placement and simultaneous bone reconstruction: a retrospective long-term cohort study.

PURPOSE: This retrospective cohort study evaluates the influence of connective tissue grafts (CTG) on bone regeneration at implant sites with total loss of the buccal bone wall treated with flapless immediate implant placement (IIP) and reconstruction with autogenous bone chips (AB) within a follow-up of up to 13 years. METHODS: Sixty implants were inserted in 55 patients in sites with total loss of the buccal bone wall between 2008 and 2021. The implants were inserted and the buccal gaps were grafted by AB. A subgroup of 34 sites was grafted additionally with CTG using tunnel technique. Primary outcome was the vertical bone regeneration in height and thickness. Secondary outcome parameters were interproximal marginal bone level, recession, soft tissue esthetics (PES), width of keratinized mucosa (KMW) and probing depths (PPD). RESULTS: Mean follow-up period was 60.8 months. In 55 sites a complete vertical bone regeneration was documented. The mean buccal bone level increased by 10.6 mm significantly. The thickness of the buccal bone wall ranged between 1.7 and 1.9 mm, and was significantly thicker in sites without CTG. Interproximal marginal bone level was at implant shoulder level. The mean recession improved significantly by 1.2 mm. In sites with CTG, recessions and PES improved significantly more. CONCLUSIONS: Additional CTG in extraction sites with total buccal bone loss followed by IIP with simultaneous AB grafting led to improved PES and recession, but also to a thinner buccal bone wall compared to sites grafted just with AB.

Evaluation optimum ratio of synthetic bone graft material and platelet rich fibrin mixture in a metal 3D printed implant to enhance bone regeneration.

BACKGROUND: This study aims to evaluate the optimal ratio of synthetic bone graft (SBG) material and platelet rich fibrin (PRF) mixed in a metal 3D-printed implant to enhance bone regeneration. METHODS: Specialized titanium hollow implants (5 mm in diameter and 6 mm in height for rabbit; 6 mm in diameter and 5 mm in height for pig) were designed and manufactured using 3D printing technology. The implants were divided into three groups and filled with different bone graft combinations, namely (1) SBG alone; (2) PRF to SBG in 1:1 ratio; (3) PRF to SBG in 2:1 ratio. These three groups were replicated tightly into each bone defect in distal femurs of rabbits (nine implants, n = 3) and femoral shafts of pigs (fifteen implants, n = 5). Animal tissue sections were obtained after euthanasia at the 8th postoperative week. The rabbit specimens were stained with analine blue, while the pig specimens were stained with Masson-Goldner's trichrome stain to perform histologically examination. All titanium hollow implants were well anchored, except in fracture specimens (three in the rabbit and one fracture in the pig). RESULT: Rabbit specimens under analine blue staining showed that collagen tissue increased by about 20% and 40% in the 1:1 ratio group and the 2:1 ratio group, respectively. Masson-Goldner's trichrome stain results showed that new bone growth increased by 32% in the 1:1 ratio PRF to SBG, while - 8% in the 2:1 ratio group. CONCLUSION: This study demonstrated that placing a 1:1 ratio combination of PRF and SBG in a stabilized titanium 3D printed implant resulted in an optimal increase in bone growth.

Diaphyseal giant cell tumour of mid-shaft tibia.

SummaryGiant cell tumours of bone are benign and locally aggressive tumours that usually occur in young adults and at the epiphysial locations after physeal closure. Occurrence outside of epiphysial locations and appearance in geriatric patients is rare. We report a case of a woman in her late 60s with a giant cell tumour of the mid-shaft of the right tibia. Extended curettage and biological reconstruction were performed with autologous double-barrel fibular struts and tri-cortical iliac crest bone grafting. At the 28-month follow-up examination, we noted full bony union at both ends with successful consolidation of the fibular struts, and importantly, no evidence of recurrence or other complications was observed.

Treatment of AVN-Induced Proximal Pole Scaphoid Nonunion Using a Fifth and Fourth Extensor Compartmental Artery as a Vascularized Pedicle Bone Graft: A Retrospective Case Series.

BACKGROUND Scaphoid nonunion (SN) is a challenging condition in wrist pathology, often resulting in severe consequences if left untreated. Surgical intervention, particularly using vascularized bone grafts (VBGs), is a promising but uncertain approach. The 4+5 extensor compartment artery (ECA) pedicled graft, less commonly used for SN, has potential benefits due to its vascular supply and accessibility to the scaphoid. This study aimed to evaluate the effectiveness of the 4+5 ECA pedicled graft combined with headless compression screw fixation in treating avascular necrosis (AVN)-induced proximal pole SN. Radiological results, functional outcomes, and complications related to this method were assessed. MATERIAL AND METHODS This was a retrospective analysis of 19 proximal pole SN cases with AVN treated using the 4+5 ECA-VBG technique from 2016 to 2022. Patients underwent preoperative evaluation and postoperative follow-up for at least 1 year. Data on surgery, demographics, radiological assessments, and functional outcomes were recorded and analyzed statistically. RESULTS All patients achieved radiographic union within 8.5 weeks postoperatively, with revascularization of proximal pole necrosis. Significant improvements in functional outcomes were observed, including pain reduction, increased wrist range of motion, improved grip and pinch strength, and enhanced wrist scores. No major complications were reported. CONCLUSIONS The 4+5 ECA-VBG technique, with headless compression screw fixation, showed high success rates in treating AVN-induced proximal pole SN. This method offers comprehensive restoration of wrist function and minimal complications, making it a viable option for SN management, especially in AVN cases. Further research is needed to confirm these results and establish standardized protocols for SN treatment.

Cranial Repair in Children: Techniques, Materials, and Peculiar Issues.

Cranial repair in children deserves particular attention since many issues are still controversial. Furthermore, literature data offer a confused picture of outcome of cranioplasty, in terms of results and complication rates, with studies showing inadequate follow-up and including populations that are not homogeneous by age of the patients, etiology, and size of the bone defect.Indeed, age has merged in the last years as a risk factor for resorption of autologous bone flap that is still the most frequent complication in cranial repair after decompressive craniectomy.Age-related factors play a role also when alloplastic materials are used. In fact, the implantation of alloplastic materials is limited by skull growth under 7 years of age and is contraindicated in the first years if life. Thus, the absence of an ideal material for cranioplasty is even more evident in children with a steady risk of complications through the entire life of the patient that is usually much longer than surgical follow-up.As a result, specific techniques should be adopted according to the age of the patient and etiology of the defect, aiming to repair the skull and respect its residual growth.Thus, autologous bone still represents the best option for cranial repair, though limitations exist. As an alternative, biomimetic materials should ideally warrant the possibility to overcome the limits of other inert alloplastic materials by favoring osteointegration or osteoinduction or both.On these grounds, this paper aims to offer a thorough overview of techniques, materials, and peculiar issues of cranial repair in children.

Reconstruction of Segmental Bone Defect in Canine Tibia Model Utilizing Bi-Phasic Scaffold: Pilot Study.

The reunion and restoration of large segmental bone defects pose significant clinical challenges. Conventional strategies primarily involve the combination of bone scaffolds with seeded cells and/or growth factors to regulate osteogenesis and angiogenesis. However, these therapies face inherent issues related to immunogenicity, tumorigenesis, bioactivity, and off-the-shelf transplantation. The biogenic micro-environment created by implanted bone grafts plays a crucial role in initiating the bone regeneration cascade. To address this, a highly porous bi-phasic ceramic synthetic bone graft, composed of hydroxyapatite (HA) and alumina (Al), was developed. This graft was employed to repair critical segmental defects, involving the creation of a 2 cm segmental defect in a canine tibia. The assessment of bone regeneration within the synthetic bone graft post-healing was conducted using scintigraphy, micro-CT, histology, and dynamic histomorphometry. The technique yielded pore sizes in the range of 230-430 µm as primary pores, 40-70 µm as secondary inner microchannels, and 200-400 nm as tertiary submicron surface holes. These three components are designed to mimic trabecular bone networks and to provide body fluid adsorption, diffusion, a nutritional supply, communication around the cells, and cell anchorage. The overall porosity was measured at 82.61 ± 1.28%. Both micro-CT imaging and histological analysis provided substantial evidence of robust bone formation and the successful reunion of the critical defect. Furthermore, an histology revealed the presence of vascularization within the newly formed bone area, clearly demonstrating trabecular and cortical bone formation at the 8-week mark post-implantation.