The Masquelet induced membrane technique with PRP-FG-nHA/PA66 scaffold can heal a rat large femoral bone defect.

BACKGROUND: Masquelet membrane induction technology is one of the treatment strategies for large bone defect (LBD). However, the angiogenesis ability of induced membrane decreases with time and autologous bone grafting is associated with donor site morbidity. This study investigates if the PRP-FG-nHA/PA66 scaffold can be used as a spacer instead of PMMA to improve the angiogenesis ability of induced membrane and reduce the amount of autologous bone graft. METHODS: Platelet rich plasma (PRP) was prepared and PRP-FG-nHA/PA66 scaffold was synthesized and observed. The sustained release of VEGFA and porosity of the scaffold were analyzed. We established a femur LBD model in male SD rats. 55 rats were randomly divided into four groups depending on the spacer filled in the defect area. "Defect only" group (n = 10), "PMMA" group (n = 15), "PRP-nHA/PA66" group (n = 15) and "PRP-FG-nHA/PA66" group (n = 15 ). At 6 weeks, the spacers were removed and the defects were grafted. The induced membrane and bone were collected and stained. The bone formation was detected by micro-CT and the callus union was scored on a three point system. RESULTS: The PRP-FG-nHA/PA66 scaffold was porosity and could maintain a high concentration of VEGFA after 30 days of preparation. The induced membrane in PRP-FG-nHA/PA66 group was thinner than PMMA, but the vessel density was higher.The weight of autogenous bone grafted in PRP-FG-nHA/PA66 group was significantly smaller than that of PMMA group. In PRP-FG-nHA/PA66 group, the bone defect was morphologically repaired. CONCLUSION: The study showed that PRP-FG-nHA/PA66 scaffold can significantly reduce the amount of autologous bone graft, and can achieve similar bone defect repair effect as PMMA. Our findings provide some reference and theoretical support for the treatment of large segmental bone defects in humans.

Cranioplasty in Oman: Retrospective review of cases from the National Craniofacial Center 2012-2022.

Objectives: Cranioplasty is a complex craniofacial and neurosurgical procedure that aims to reinstate the architecture of the cranial vault and elevate both its aesthetic and neurological function. Several reconstructive materials have been thoroughly explored in the search for the optimal solution for cranioplasty. This study aimed to evaluate different material used for cranial reconstruction in Oman. Methods: This retrospective study included all patients who had had cranioplasty procedures performed at Khoula Hospital, Muscat, Oman, from 2012 to 2022. Demographic information, the characteristics of the cranial defect and any complications that occurred post-operatively were analysed. Results: A total of 47 patients were included in this study. The most common cause of cranial defects was craniectomy following traumatic head injury (70.2%) along with excision of fibrous dysplasia (10.6%). The most frequently utilised material for cranial repair was autologous bone grafts (n = 28), followed by polyetheretherketone (PEEK; n = 14). Interestingly, the replacement of bone grafts from previous craniectomy showed a notably high resorption rate (71.4%), in contrast to split calvarial grafts (0%) and other types of bone grafts (14.3%). Additionally, delayed graft infection was observed in 3.6% of the bone graft group and 7.1% of the PEEK group. Conclusion: Patient-specific alloplastic implants such as PEEK have gained popularity for large and complex cranioplasty, as they provide excellent aesthetic outcomes and leave no donor site morbidity. In contrast, bone grafts remain the gold standard for small to medium-sized cranial defects.

Analysis of the effect on costochondral graft for TMJ ankylosis with jaw deformities in pediatrics.

OBJECTIVES: To evaluate the effects of costochondral grafting (CCG) used for temporomandibular joint ankylosis (TMJA) in growing patients. MATERIALS AND METHODS: Pediatric patients with TMJA treated by CCG from 2010.5 to 2021.7 were included in the study. CT scans were performed before and after operations with at least 1 year follow-up. The height of the mandibular ramus, menton deviation or retraction, osteotomy gap, etc. were measured by ProPlan CMF1.4 software. CCG growth, resorption, and relapse were evaluated and analyzed with influencing factors such as age, ostectomy gap, etc. by generalized estimating equation. RESULTS: There were 24 patients (29 joints) with an average age of 6.30 ± 3.13 years in the study. After operation, the mandibular ramus was elongated by 5.97 ± 3.53 mm. Mandibular deviation or retrusion was corrected by 4.82 ± 2.84 mm and 3.76 ± 2.97 mm respectively. After a mean follow-up of 38.91 ± 29.20 months, 58.62% CCG grew (4.18 ± 7.70 mm), 20.69% absorbed (2.23 ± 1.16 mm), and 20.69% re-ankylosed. The re-ankylosis was negatively correlated with the osteotomy gap (OR:0.348,0.172-0.702 95%CI, critical value = 6.10 mm). CCG resorption was positively correlated with the distance of CCG ramus elongation (OR:3.353,1.173-9.586 95%CI, critical value = 7.40 mm). CONCLUSIONS: An adequate osteotomy gap and CCG ramus elongation distance are the key factors for successful treatment of TMJA with jaw deformities in growing patients. CLINICAL RELEVANCE: TMJA affects mouth opening and jaw development in pediatric patients. The most common autogenous bone graft for pediatric patients is CCG due to its growth potential, convenient access and easy contouring. Also, it can simultaneously reconstruct the TMJ and improve jaw deformity by lengthening the mandibular ramus. But the growth of CCG is unpredictable. In this study, we explored several factors that may affect the absorption and re-ankylosis of CCG, expecting to provide several suggestions to improve future CCG treatment.

Comparative Studies of Bone Graft and Orthobiologics for Foot Ankle Arthrodesis: A Critical Review.

Graft materials available to supplement hindfoot and ankle arthrodesis procedures include autologous (autograft) or allogeneic bone graft (allograft) but also bone graft substitutes such as demineralized bone matrix, calcium sulfate, calcium phosphate, and tricalcium phosphate/hydroxyapatite. In addition, biologic agents, such as recombinant human bone morphogenetic protein-2 or recombinant human platelet derived growth factor-BB (rhPDGF-BB), and preparations, including platelet-rich plasma or concentrated bone marrow aspirate, have been used to facilitate bone healing in ankle or hindfoot arthrodesis. The purpose of this review was to summarize the available clinical evidence surrounding the utilization and efficacy of the above materials and biological agents in ankle or hindfoot arthrodesis procedures, with emphasis on the quality of the existing evidence to facilitate clinical decision making.

Cranial Repair in Children: Techniques, Materials, and Peculiar Issues.

Cranial repair in children deserves particular attention since many issues are still controversial. Furthermore, literature data offer a confused picture of outcome of cranioplasty, in terms of results and complication rates, with studies showing inadequate follow-up and including populations that are not homogeneous by age of the patients, etiology, and size of the bone defect.Indeed, age has merged in the last years as a risk factor for resorption of autologous bone flap that is still the most frequent complication in cranial repair after decompressive craniectomy.Age-related factors play a role also when alloplastic materials are used. In fact, the implantation of alloplastic materials is limited by skull growth under 7 years of age and is contraindicated in the first years if life. Thus, the absence of an ideal material for cranioplasty is even more evident in children with a steady risk of complications through the entire life of the patient that is usually much longer than surgical follow-up.As a result, specific techniques should be adopted according to the age of the patient and etiology of the defect, aiming to repair the skull and respect its residual growth.Thus, autologous bone still represents the best option for cranial repair, though limitations exist. As an alternative, biomimetic materials should ideally warrant the possibility to overcome the limits of other inert alloplastic materials by favoring osteointegration or osteoinduction or both.On these grounds, this paper aims to offer a thorough overview of techniques, materials, and peculiar issues of cranial repair in children.

[Topographic study of the parietal region for the elaboration of revascularized cranium vault autograft]. / Izuchenie topografo-anatomicheskikh osobennostei temennoi oblasti pri razrabotke revaskulyariziruemogo kostno-fastsial'nogo temennogo autotransplantata.

OBJECTIVE: Topographic and blood vessel architecture study of the parietal area and distal regional pool of the superficial temporal artery (STA) to assess the possibility of revascularized cranium vault bone autograft formation. MATERIAL AND METHODS: For the topographic and anatomical study, 30 non-fixed corpses (17 male and 13 female) were selected, the average age of which was 59±5 years. In the anamnesis and catamnesis, there were no indications of trauma or other pathology of the head and neck, including vascular. STA was contrasted with a non-radiocontrast dye (brilliant green) with the introduction of the dye into the STA with preliminary ligation of the frontal branch of the STA. The area of blood supply to soft tissue and bone structures was studied. The angioarchitectonics of the parietal region was studied, the feeding vessel of the studied flap was identified. RESULTS: The obtained anatomical landmarks for the collection of CPFP flap make it possible to form a flap with high accuracy and minimize the morbidity of the donor area.

Activated allograft combined with induced menbrane technique for the reconstruction of infected segmental bone defects.

This study was desinged to evaluate the efficacy and safety of activated allograft combined with the induced membrane technique for reconstruction of infected segment bone defects of lower limbs. A retrospective analysis was conducted on 19 patients from May 2015 to February 2017. After debridements, the bone defects were filled with antibiotic bone cement to form the induced membrane. Autologous mesenchymal stem cells were seeded onto allografts to construct activated allograft, which was implanted into the induced membrane after infection was controlled. The clinical efficacy and complications were observed. 19 patients with 20 infected segment bone defect were evaluated. The average deficit size was 11.08 (4-17) cm in length. After a mean follow-up of 71.84 (61-82) months, bone union was achieved in 16 patients (17 sites), resulting in a final union rate of 84.21% (16/19 patients). The average bone union time was 10.18 (5-28) months. There were 2 patients with recurrence of infection, 3 patients with graft absorption, and 1 patient with malunion due to implant breakage. There were no graft-related complications. This study provides clinical significance for the treatment of patients with insufficient autologous bone.

Comparing the effects of Bone+B® xenograft and InterOss® xenograft bone material on rabbit calvaria bone defect regeneration.

BACKGROUND: The bone regeneration therapy is often used in patients with inadequate bone support for implants, particularly following tooth extractions. Xenografts derived from animal tissues are effective bone reconstructive options that resist resorption and pose a low risk of transmitting disease. Therefore, these implants may be a good option for enhancing and stabilizing maxillary sinuses. The purpose of this study was to compare two xenografts, Bone+B® and InterOss®, for the reconstruction of rabbit calvaria defects. METHODS AND MATERIALS: The study involved seven male New Zealand white rabbits. In the surgical procedure, 21 spots were created on both sides of the midline calvarium by creating three 8-millimeter defects. A control group was used, as well as two treatment groups utilizing Bone+B® Grafts and InterOss® Grafts. After 3 months, the rabbits were euthanized, followed by pathological evaluation. Analysis of these samples focused on bone formation, xenograft remaining material, and inflammation levels, using Adobe Photoshop CS 8.0 and SPSS version 24. RESULTS: With the application of Bone+B® graft, bone formation ranged from 32% to 45%, with a mean of 37.80% (±5.63), and the remaining material ranged from 28% to 37%, with a mean of 32.60% (±3.65). Using InterOss® grafts, bone formation was 61% to 75%, the mean was 65.83% (±4.75), and the remaining material was 9% to 18%, with a mean of 13.17% (±3.06). The bone formation in the control group ranged from 10% to 25%, with a mean of 17.17% (±6.11). InterOss® had lower inflammation levels than other groups, but the difference was not statistically significant (p > .05). CONCLUSION: InterOss® bone powder is the best option for maxillofacial surgery and bone reconstruction. This is due to more bone formation, less remaining material, and a lower inflammation level. Compared to the control group, Bone+B® improves healing and bone quality, thus making it an alternative to InterOss®.

Is it necessary to graft the void defect during open reduction and internal fixation of calcaneal fractures?

PURPOSE: There are still controversies on the effect of grafting during open reduction and internal fixation of calcaneal fractures. The aim of this study was to compare the radiological and functional outcomes in patients with or without intraoperative grafting. METHODS: In a comparative retrospective study, among 442 operatively-treated calcaneal fractures, 60 patients with unilateral closed sanders type II intraarticular calcaneal fracture who underwent ORIF via lateral extensile approach using locking anatomical plates with at least 1 year follow-up without any postoperative wound complication were enrolled. The patients were separated into 2 groups: with bone allograft and without bone allograft. The functional outcome of the patients was assessed using visual analog scale (VAS) for pain, the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot scale, foot function index (FFI), and short-form (SF-36) health survey. Radiographic variables included Böhler angle, Gissane angle, calcaneal width, calcaneal height, and talar declination angle. Also, the differences (delta) of these values in comparison to the uninjured foot were calculated. RESULTS: The mean age was 39.1 ± 12.7 (range, 13-67) years with 54 males, 90.0%. No statistically significant differences were detected in age, gender, affected side, and subtypes of calcaneal fractures between the two groups (p > 0.05). The average follow-up was 25.1 (range, 12-48) months. The differences for all radiographic measurements and also, the delta values between the groups were not statistically significant, except talar declination angle which was more in cases without grafting (p = 0.007). Although the differences between the two groups regarding AOFAS ankle-hindfoot scale (p = 0.257), VAS for pain (p = 0.645), and FFI (p = 0.261) were not statistically significant; the group with bone graft experienced less pain (19.7 ± 22.0) than the other group (26.7 ± 22.8). The difference between the groups was not statistically significant (p = 0.87) according to the SF-36 questionnaire. CONCLUSIONS: Incorporating allografts into the void defects during ORIF of displaced intraarticular calcaneal fractures may not improve functional outcomes and recover postoperative radiological parameters. Therefore, routine use of allograft to fill the defects during ORIF of calcaneus may not be recommended. Of note, that these findings solely relate to the treatment of Sanders type II fractures. LEVEL OF EVIDENCE III: Comparative retrospective study.

Implant stability and clinical outcome between implant placement using internal sinus floor elevation with alloplastic bone material grafting and without grafting: A 1-year randomized clinical trial.

OBJECTIVE: To compare implant stability and clinical outcome in implant placement between osteotome sinus floor elevation (OSFE) with biphasic calcium phosphate (BCP) which consisted of 30% of hydroxyapatite (HA) and 70% of beta-tricalcium phosphate (ß -TCP) grafting material and OSFE without using bone grafting material. The research questions is whether the BCP provides any benefit in OSFE or not. MATERIALS AND METHODS: Thirty patients (30 implants) with a single edentulous area of upper premolar or molar were randomly separated into OSFE with BCP (n = 15) and OSFE without grafting (n = 15). The patients were reevaluated 3, 6, 9, and 12 months after implant loading. The clinical assessments (implant stability quotient (ISQ), implant survival-failure rate, and surgical complication) were analyzed. Together with radiographic assessments in 2D (endo-sinus bone gain (ESBG), mean marginal bone change (MMBC)) and 3D (endo-sinus bone gain in CBCT (ESBG-CT)) were evaluated, with a mean follow-up time of at least 12 months of functional loading and prosthetic complication. RESULTS: 20 remaining implants (OSFE with BCP, n = 10; OSFE without grafting, n = 10) were analyzed. Mean ISQ was 79.18 ± 3.43 in 1-year follow-up (ISQ; OSFE with BCP = 78.72 ± 3.46, OSFE without grafting = 79.65 ± 3.52). ISQ in both groups increased steadily without significant differences in each follow-up. (p = 0.56). In radiographic evaluation, at 6-, 9-, and 12-month, OSFE without grafting group showed statistically significant lower MMBC (p < 0.05). The 1-year clinical results showed that 2 implants failed in OSFE with BCP, and 1 implant failed in OSFE without grafting. CONCLUSIONS: Graft material "BCP" (HA30:TCP70) coupled with OSFE presents no extraordinary benefit in implant stability, clinical and radiographic outcome in 1-year follow-up. CLINICAL RELEVANCE: Clinically, OSFE with grafting materials provides no additional benefit. CLINICAL TRIAL REGISTRATION NUMBER: TCTR20210517008 (date of registration: May 17, 2021).

Trifocal versus Pentafocal bone transport in segmental tibial defects: a matched comparative analysis for posttraumatic osteomyelitis treatment.

PURPOSE: The objective of this study was to evaluate and compare the effectiveness and clinical results of trifocal bone transport (TBT) and pentafocal bone transport (PBT) in treating distal tibial defects > 6 cm resulting from posttraumatic osteomyelitis, highlighting the potential advantages and challenges of each method. METHODS: A retrospective assessment was conducted on an overall population of 46 eligible patients with distal tibial defects > 6 cm who received treatment between January 2015 and January 2019. Propensity score analysis was used to pair 10 patients who received TBT with 10 patients who received PBT. The outcomes assessed included demographic information, external fixation time (EFT), external fixation index (EFI), bone and functional outcomes assessed using the Association for the Study and Application of the Method of Ilizarov (ASAMI) scoring system, and postoperative complications evaluated using the Paley classification. RESULTS: The demographic and baseline data of the two groups were comparable. Following radical debridement, the average tibial defect was 7.02 ± 0.68 cm. The mean EFT was significantly shorter in the PBT group (130.9 ± 16.0 days) compared to the TBT group (297.3 ± 14.3 days). Similarly, the EFI was lower in the PBT group (20.67 ± 2.75 days/cm) than in the TBT group (35.86 ± 3.69 days/cm). Both groups exhibited satisfactory postoperative bone and functional results. Pin site infection was the most common complication and the rates were significantly different between the groups, with the PBT group demonstrating a higher incidence. CONCLUSION: Both TBT and PBT effectively treat posttraumatic tibial defects greater than 6 cm, with PBT offering more efficient bone regeneration. However, PBT is associated with a higher rate of pin site infections, highlighting the importance of careful management in these complex procedures and emphasizing the need for expert surgical execution and tailored treatment approaches in orthopedic reconstructive surgery.

Treatment of AVN-Induced Proximal Pole Scaphoid Nonunion Using a Fifth and Fourth Extensor Compartmental Artery as a Vascularized Pedicle Bone Graft: A Retrospective Case Series.

BACKGROUND Scaphoid nonunion (SN) is a challenging condition in wrist pathology, often resulting in severe consequences if left untreated. Surgical intervention, particularly using vascularized bone grafts (VBGs), is a promising but uncertain approach. The 4+5 extensor compartment artery (ECA) pedicled graft, less commonly used for SN, has potential benefits due to its vascular supply and accessibility to the scaphoid. This study aimed to evaluate the effectiveness of the 4+5 ECA pedicled graft combined with headless compression screw fixation in treating avascular necrosis (AVN)-induced proximal pole SN. Radiological results, functional outcomes, and complications related to this method were assessed. MATERIAL AND METHODS This was a retrospective analysis of 19 proximal pole SN cases with AVN treated using the 4+5 ECA-VBG technique from 2016 to 2022. Patients underwent preoperative evaluation and postoperative follow-up for at least 1 year. Data on surgery, demographics, radiological assessments, and functional outcomes were recorded and analyzed statistically. RESULTS All patients achieved radiographic union within 8.5 weeks postoperatively, with revascularization of proximal pole necrosis. Significant improvements in functional outcomes were observed, including pain reduction, increased wrist range of motion, improved grip and pinch strength, and enhanced wrist scores. No major complications were reported. CONCLUSIONS The 4+5 ECA-VBG technique, with headless compression screw fixation, showed high success rates in treating AVN-induced proximal pole SN. This method offers comprehensive restoration of wrist function and minimal complications, making it a viable option for SN management, especially in AVN cases. Further research is needed to confirm these results and establish standardized protocols for SN treatment.

Sequential free fibula transfers: Quality of life and systematic review.

BACKGROUND: Successive osteoseptocutaneous fibula transfers for jaws reconstruction are rare but important options. This study contributes patient-reported and clinical outcomes, as well as systematically reviews all existing reports. METHODS: All sequential fibula transfers performed by the senior author were reviewed from a prospectively managed database, including University of Washington quality of life (UWQoL). Systematic review was conducted in PubMed and Cochrane databases for similar publications. RESULTS: Eighteen patients (average age 51.5 years) received sequential fibulas (mean 4.7 years between reconstructions). Secondary fibulas more often had benign indications (72.2% vs. 33.3%, p = .04), most commonly osteoradionecrosis (38.9%). At a mean follow-up of 30.5 months, the average interincisal distance increased from 21.8 to 27.6 mm, and 92.3% tolerated an oral diet following the second fibula. Eight patients completed the UW-QoL before and after the second fibula, and three prior to the first fibula. Composite physical function was significantly decreased from 96.7 prefibula reconstruction to 63.3 following the first (p < .001) and 64.2 after the second fibula (p < .001). There were no differences in other domains. The systematic review yielded six articles reporting 56 patients (mean 39 months between fibulas). Secondary fibulas were performed for repeat malignancy (45%) and osteoreadionecrosis (39%), resulting in elevated tube feeding from 20% following the first to 39% following the second, but overall high quality of life in two studies. CONCLUSIONS: Sequential osteoseptocutaneous fibula reconstructions of jaws are often performed for benign indications such as osteoradionecrosis. Overall function and QoL are comparable with those following the first fibula transfer.

Evaluation optimum ratio of synthetic bone graft material and platelet rich fibrin mixture in a metal 3D printed implant to enhance bone regeneration.

BACKGROUND: This study aims to evaluate the optimal ratio of synthetic bone graft (SBG) material and platelet rich fibrin (PRF) mixed in a metal 3D-printed implant to enhance bone regeneration. METHODS: Specialized titanium hollow implants (5 mm in diameter and 6 mm in height for rabbit; 6 mm in diameter and 5 mm in height for pig) were designed and manufactured using 3D printing technology. The implants were divided into three groups and filled with different bone graft combinations, namely (1) SBG alone; (2) PRF to SBG in 1:1 ratio; (3) PRF to SBG in 2:1 ratio. These three groups were replicated tightly into each bone defect in distal femurs of rabbits (nine implants, n = 3) and femoral shafts of pigs (fifteen implants, n = 5). Animal tissue sections were obtained after euthanasia at the 8th postoperative week. The rabbit specimens were stained with analine blue, while the pig specimens were stained with Masson-Goldner's trichrome stain to perform histologically examination. All titanium hollow implants were well anchored, except in fracture specimens (three in the rabbit and one fracture in the pig). RESULT: Rabbit specimens under analine blue staining showed that collagen tissue increased by about 20% and 40% in the 1:1 ratio group and the 2:1 ratio group, respectively. Masson-Goldner's trichrome stain results showed that new bone growth increased by 32% in the 1:1 ratio PRF to SBG, while - 8% in the 2:1 ratio group. CONCLUSION: This study demonstrated that placing a 1:1 ratio combination of PRF and SBG in a stabilized titanium 3D printed implant resulted in an optimal increase in bone growth.

The influence of connective tissue grafting on the reconstruction of a missing facial bone wall using immediate implant placement and simultaneous bone reconstruction: a retrospective long-term cohort study.

PURPOSE: This retrospective cohort study evaluates the influence of connective tissue grafts (CTG) on bone regeneration at implant sites with total loss of the buccal bone wall treated with flapless immediate implant placement (IIP) and reconstruction with autogenous bone chips (AB) within a follow-up of up to 13 years. METHODS: Sixty implants were inserted in 55 patients in sites with total loss of the buccal bone wall between 2008 and 2021. The implants were inserted and the buccal gaps were grafted by AB. A subgroup of 34 sites was grafted additionally with CTG using tunnel technique. Primary outcome was the vertical bone regeneration in height and thickness. Secondary outcome parameters were interproximal marginal bone level, recession, soft tissue esthetics (PES), width of keratinized mucosa (KMW) and probing depths (PPD). RESULTS: Mean follow-up period was 60.8 months. In 55 sites a complete vertical bone regeneration was documented. The mean buccal bone level increased by 10.6 mm significantly. The thickness of the buccal bone wall ranged between 1.7 and 1.9 mm, and was significantly thicker in sites without CTG. Interproximal marginal bone level was at implant shoulder level. The mean recession improved significantly by 1.2 mm. In sites with CTG, recessions and PES improved significantly more. CONCLUSIONS: Additional CTG in extraction sites with total buccal bone loss followed by IIP with simultaneous AB grafting led to improved PES and recession, but also to a thinner buccal bone wall compared to sites grafted just with AB.

Reconstruction of the Medial Malleolus With Iliac Crest Autograft After Traumatic Loss: A Case Report.

CASE: A 19-year-old woman sustained an open ankle fracture with complete destruction of the left medial malleolus and significant soft-tissue loss. After temporizing external fixation and coverage with a rotational posterior tibial artery perforator flap, the medial malleolus was reconstructed with an autologous iliac crest bone graft and direct repair of the deltoid ligament. The patient achieved excellent improvement in functional outcomes at 21 months with adequate restoration of ankle motion. CONCLUSION: This case shows reconstruction of the medial malleolus with autologous iliac crest bone graft after traumatic loss can be a viable treatment option for young patients.

A review of 10 patients treated with the masquelet technique and microsurgical technique combined for Gustilo type III open tibial fractures.

BACKGROUND: Open tibial fractures often include severe bone loss and soft tissue defects and requires complex reconstructive operations. However, the optimal treatment is unclear. METHODS: This retrospective study enrolled patients with Gustilo type III open tibial fractures from January 2018 to January 2021 to assess the clinical utility of Masquelet technique together with microsurgical technique as a combined strategy for the treatment of open tibial fractures. The demographics and clinical outcomes including bone union time, infection, nonunion and other complications were recorded for analysis. The bone recovery quality was evaluated by the AOFAS Ankle-Hindfoot Scale score and the Paley criteria. RESULTS: We enrolled 10 patients, the mean age of the patients and length of bone defects were 31.7 years (range, 23-45 years) and 7.5 cm (range, 4.5-10 cm) respectively. Bone union was achieved for all patients, with an average healing time of 12.2 months (range, 11-16 months). Seven patients exhibited a bone healing time of less than 12 months, whereas 3 patients exhibited a bone healing time exceeding 12 months. No significant correlation was found between the length of bone loss and healing time. In addition, no deep infection or nonunion was observed, although 2 patients experienced wound fat liquefaction with exudates and 1 patient presented with a bloated skin flap. The average AOFAS Ankle-Hindfoot Scale score was 80.5 (range, 74-85), and all patients were evaluated as good or exellent based on the Paley criteria. CONCLUSIONS: Our study indicated that the use of the Masquelet technique and the microsurgical technique as a combined strategy is safe and effective for the treatment of Gustilo type III open tibial fractures.

Impact of surgical risk factors for non-union on lumbar spinal fusion outcomes using cellular bone allograft at 24-months follow-up.

BACKGROUND: The current report investigates fusion rates and patient-reported outcomes following lumbar spinal surgery using cellular bone allograft (CBA) in patients with risk factors for non-union. METHODS: A prospective, open label study was conducted in subjects undergoing lumbar spinal fusion with CBA (NCT02969616) to assess fusion success rates and patient-reported outcomes in subjects with risk factors for non-union. Subjects were categorized into low-risk (≤ 1 risk factors) and high-risk (> 1 risk factors) groups. Radiographic fusion status was evaluated by an independent review of dynamic radiographs and CT scans. Patient-reported outcome measures included quality of life (EQ-5D), Oswestry Disability Index (ODI) and Visual Analog Scales (VAS) for back and leg pain. Adverse event reporting was conducted throughout 24-months of follow-up. RESULTS: A total of 274 subjects were enrolled: 140 subjects (51.1%) were categorized into the high-risk group (> 1 risk factor) and 134 subjects (48.9%) into the low-risk group (≤ 1 risk factors). The overall mean age at screening was 58.8 years (SD 12.5) with a higher distribution of females (63.1%) than males (36.9%). No statistical difference in fusion rates were observed between the low-risk (90.0%) and high-risk (93.9%) groups (p > 0.05). A statistically significant improvement in patient-reported outcomes (EQ-5D, ODI and VAS) was observed at all time points (p < 0.05) in both low and high-risk groups. The low-risk group showed enhanced improvement at multiple timepoints in EQ-5D, ODI, VAS-Back pain and VAS-Leg pain scores compared to the high-risk group (p < 0.05). The number of AEs were similar among risk groups. CONCLUSIONS: This study demonstrates high fusion rates following lumbar spinal surgery using CBA, regardless of associated risk factors. Patient reported outcomes and fusion rates were not adversely affected by risk factor profiles. TRIAL REGISTRATION: NCT02969616 (21/11/2016).

BeST-Graft viewer, a new system to improve the bone allograft-recipient matching process.

INTRODUCTION: Tissue establishments are responsible for processing, testing, preserving, storing, and distributing allografts from donors to be transplanted into recipients. In some situations, a matching process is required to determine the allograft that best fits the recipient. Allograft morphology is a key consideration for the matching process. The manual procedures applied to obtain these parameters make the process error-prone. MATERIAL AND METHODS: A new system to manage bone allograft-recipient matching for tissue establishments is proposed. The system requires bone allografts to be digitalized and the resulting images to be stored in a DICOM file. The system provides functionalities to: (i) manage DICOM files (registered in the PACs) from both allografts and recipients; (ii) reconstruct 3D models from DICOM images; (iii) explore 3D models using 2D, 3D, and multiplanar reconstructions; (iv) take allograft and recipient measurements; and (v) visualize and interact with recipient and allograft data simultaneously. The system has been installed in the Barcelona Tissue Bank (Banc de Sang i Teixits), which has digitalized the bone allografts to test the system. RESULTS: A use case with a femur is presented to test all the viewer functionalities. In addition, the recipient-allograft workflow is evaluated to show the steps of the procedure where the viewer can be used. CONCLUSIONS: The bone allograft-recipient matching procedure can be optimized using software tools with functionalities to visualize, interact, and take measurements.