Toward a more realistic estimate of exposure to chromium and nickel in soils of geogenic and/or anthropogenic origin: importance of oral bioaccessibility.

To enhance risk assessment for contaminated sites, incorporating bioavailability through bioaccessibility as a corrective factor to total concentration is essential to provide a more realistic estimate of exposure. While the main in vitro tests have been validated for As, Cd, and/or Pb, their potential for assessing the bioaccessibility of additional elements remains underexplored. In this study, the physicochemical parameters, pseudototal Cr and Ni concentrations, soil phase distribution, and oral bioaccessibility of twenty-seven soil samples were analysed using both the ISO 17924 standard and a simplified test based on hydrochloric acid. The results showed wide variability in terms of the concentrations (from 31 to 21,079 mg kg-1 for Cr, and from 26 to 11,663 mg kg-1 for Ni) and generally low bioaccessibility for Cr and Ni, with levels below 20% and 30%, respectively. Bioaccessibility variability was greater for anthropogenic soils, while geogenic enriched soils exhibited low bioaccessibility. The soil parameters had an influence on bioaccessibility, but the effects depended on the soils of interest. Sequential extractions provided the most comprehensive explanation for bioaccessibility. Cr and Ni were mostly associated with the residual fraction, indicating limited bioaccessibility. Ni was distributed in all phases, whereas Cr was absent from the most mobile phase, which may explain the lower bioaccessibility of Cr compared to that of Ni. The study showed promising results for the use of the simplified test to predict Cr and Ni bioaccessibility, and its importance for more accurate human exposure evaluation and effective soil management practices.

Chromium removal by microbial mats: understanding the effect of salinity and pH.

Environmental contamination by chromium represents a serious public health problem. Therefore, it is crucial to develop and optimize remediation technologies to reduce its concentration in the environment. The aims of this study were to evaluate the uptake of chromium by live and complete microbial mats in experimental mesocosms under different pH and salinity conditions to understand how these factors affect the microphytobenthic community and, consequently, how chromium removal process is influenced. Microbial mats from the estuarine environment were exposed to 15 mg Cr/L under different pH (2, 4, and 8) and salinity (2, 15, and 33) conditions. Salinity, redox potential, and pH were measured throughout the trial in solutions and in microbial mats, while total Cr determinations were performed at the end of the assay. The results demonstrated that the removal efficiency of Cr by microbial mats was significantly improved in solutions at pH 2, remaining unaffected by variations in salinity. Notably, both cyanobacteria and diatoms showed remarkable resistance to Cr exposure under all conditions tested, highlighting their exceptional adaptability. Microbial mats have proved to be effective filters for reducing the concentration of chromium in aqueous solutions with varying pH and salinity levels.

Rapidly and simply detecting Cr (VI) in aqueous media via a diketopyrrolopyrrole-based chemosensor with both high selectivity and low LOD.

BACKGROUND: The high toxicity of hexavalent chromium [Cr (VI)] could not only cause harmful effects on humans, including carcinogenicity, respiratory issues, genetic damage, and skin irritation, but also contaminate drinking water sources, aquatic ecosystems, and soil, impairing the reproductive capacity, growth, and survival of organisms. Due to these harmful effects, detecting toxic Cr (VI) is of great significance. However, the rapid, simple, and efficient detection at a low Cr (VI) concentration is extremely challenging, especially in an acidic condition (existing as HCrO4-) due to its low adsorption free energy. RESULTS: A diketopyrrolopyrrole-based small molecule (DPPT-PhSMe) is designed and characterized to act as a chemosensor, which allows a high selectivity to Cr (VI) at an acidic condition with a low limit of detection to 10-8 M that is two orders of magnitude lower than the cut of limit (1 µM) recommended by World Health Organization (WHO). Mechanism study indicates that the rich sulfur atoms enhance the affinity to HCrO4-. Combining with favorable features of diketopyrrolopyrrole, DPPT-PhSMe not only allows dual-mode detection (colorimetric and spectroscopic) to Cr (VI), but also enables disposable paper-based sensor for naked-eye detection to Cr (VI) from fully aqueous media. The investigation of DPPT-PhSMe chemosensor for the quantification of Cr (VI) in real life samples demonstrates a high reliability and accuracy with an average percentage recovery of 102.1 % ± 4 (n = 3). SIGNIFICANCE: DPPT-PhSMe represents the first diketopyrrolopyrrole-derived chemosensor for efficient detection to toxic Cr (VI), not only providing a targeted solution to the bottleneck of Cr (VI) detection in acidic conditions (existing as HCrO4-) caused by its low adsorption free energy, but also opening a new scenario for simple, selective, and efficient Cr (VI) detection with conjugated dye molecules.

Quantification of sources and potential risks of cadmium, chromium, lead, mercury and arsenic in agricultural soils in a rapidly urbanizing region of southwest China: the case of Chengdu.

Rapid urbanization a major factor affecting heavy metal contamination on suburban agricultural soils. In order to assess the dynamic contamination of heavy metals in soil from agricultural land bordering a rapidly urbanizing area and the transfer of human health risks from contaminants in this process, 186 and 293 soil samples from agricultural land in suburban Chengdu were collected in September 2008 and September 2017, respectively. Several indicators, such as the integrated pollution index (PI) and the potential ecological risk index (RI), were employed for analyzing the heavy metal contamination levels, and the APCS-MLR receptor model were applied for analyzing the heavy metal sources. As a result, mean concentrations for five elements did not exceed the national soil pollution risk screening values in the two periods mentioned above. Nemerow's composite contamination index revealed an increase in soil contamination of arable land after 10 years of urbanization, with 3.75 and 1.02% of light and moderate sample plots, respectively, by 2017. The assessment for potential ecological risk indicated an increased level of eco-risk to high for most of the sample plots. Based on the APCS-MLR model, the origin and contribution to the five elements varied considerably between the two periods mentioned above. Among them, soil Pb changed from "industrial source" to "transportation source," soil Cr changed from "natural source" to "transportation source," and As and Hg changed from "industrial source" to "transportation source." As and Hg were associated with agricultural activities in both periods, and Cd was derived from industrial activities in both periods. The study suggests that inhalation has become a major contributor to non-cancer health risks in urbanization, unlike intake routes in previous periods, and that the increase in cancer risk is mainly due to children's consumption of agricultural products with As residues. The change in the main source of As to "transportation" also indicates a decrease in air quality during urbanization and the development of the transportation industry. This study provides a reference for the governments of rapidly urbanizing cities to formulate relevant highway and agricultural policies to safeguard the health of the people based on the current situation.

Influence of vegetation on heavy metal Cr release process from bottom sediment under unidirectional flows and regular waves.

As human activities become more intensive, a substantial number of heavy metals are discharged into estuarine or wetland environments. Due to the poor degradability, heavy metals are prone to adsorption and deposition on suspended particles in bottom sediments. Subsequently, under the influence of disturbances, there is a potential for their re-release, causing secondary pollution. To investigate the release process of the heavy metal Cr from sediment, laboratory experiments were conducted under both unidirectional flow and regular wave conditions. At the initial stage, the temporal trends of particulate (CrP) and dissolved (CrD) Chromium concentrations were both characterized by initial increments followed by stabilization and continuous escalation. Vertically, the stable concentrations of CrP and CrD increased with the presence of vegetation and the enhancement of hydrodynamics. The Elovich equation, pseudo-second-order kinetic equation, Double constant equation (Freundlich model), and parabolic diffusion equation were employed to predict the release process of CrD from bottom sediment. The Elovich equation proved most suitable for describing the release process of CrD, with an R2 exceeding 0.9. In order to assess the influence of vegetation on the Cr release process, the Stem-Reynolds were introduced to modify the Elovich equation. The final maximum error was 12 % (excluding the initial stage), which was much lower than that using the original Elovich equation (maximum error of 32 %). The study findings provide practical support for estuarine and wetland managers to formulate effective heavy metal management measures, which contribute to the conservation and sustainable management of aquatic ecosystems.

Distribution and health risk of chromium in wheat grains at the national scale in China.

Chromium (Cr) pollution may threaten food safety in China. In this study, the concentration, pollution level, distribution, and non-cancer risk of Cr in wheat grains grown in 186 areas across 28 provinces in China were investigated. Results indicated that mean concentration of Cr was 0.28 ± 2.5 mg/kg, dry mass (dm). Of the samples, 7.5 % were found to be polluted with Cr. The mean concentrations were in the following order: Northwest > Northeast > South > East > North > Southwest > Central China. Based on deterministic models, mean hazard quotient (HQ) values for adult males, adult females, and children were 0.11 ± 3.4, 0.11 ± 3.4, and 0.13 ± 3.5, respectively with < 6 % of HQ values ≥ 1. Eleven sites in northern China were identified as hotspots, whereas Gansu Province and Northwestern China were labeled as priority provinces and regions for risk control. The mean HQ values estimated by probabilistic risk assessment were two times greater than those estimated using deterministic models. The risk probabilities for adult males, adult females, and children were 4.81 %, 3.78 %, and 6.55 %, respectively. This study provides valuable information on Cr pollution in wheat grains and its risks at a national scale in China.

Efficient chromium removal from leather industrial wastewater in batch experimental study: Green synthesis and characterization of zinc oxide nanoparticles using Ficus benghalensis extracts.

The urgent need to address the severe environmental risk posed by chromium-contaminated industrial wastewater necessitates the development of eco-friendly cleanup methodologies. Utilizing the Ficus benghalensis plant extracts, the present study aims to develop green zinc oxide nanoparticles for the removal of Cr metal ions from wastewater. The leaves of Ficus benghalensis, often known as the banyan tree, were used to extract a solution for synthesizing ZnO NPs. These nanoparticles were developed with the goal of efficiently eliminating chromium (Cr) from industrial effluents. Batch studies were carried out to assess the efficiency of these synthesized ZnO NPs in treating leather industrial effluent, with aiming for optimal chromium removal. This involved measuring the nanoparticles' capacity to adsorb Cr ions from wastewater samples by comparing chromium levels before and after treatment. Removal efficiency for Cr was estimated through the batches such as optimization of pH, contact time, initial Cr concentration and sorbent dose of ZnO NPs were of the batches. These synthesized ZnO NPs were found to be successful in lowering chromium levels in wastewater to meet permissible limit. The nanoparticles exhibited their highest absorption capacity, reaching 94 % (46 mg/g) at pH 4, with a contact time of 7 hours with the optimum sorbent dose of 0.6 g/L. Hence, the excellent adsorption capabilities of these nanoparticles, together with their environmentally benign manufacturing technique, provide a long-term and efficient solution for chromium-contaminated wastewater treatment. Its novel nature has the potential to significantly improve the safety and cleanliness of water ecosystems, protecting the both i.e. human health and the environment.

Adsorption efficiency of chitosan/clinoptilolite (CS/CZ) composite for effective removal of Cd+2 and Cr+6 ions from wastewater effluents of dairy cattle farms.

The wastewater effluent is responsible for the major ecological impact of the dairy sectors. To avoid the negative consequences of heavy metal pollution on the ecosystem, creative, affordable, and efficient treatment methods are now required before the effluent flows into the surrounding area. This study was aimed at assessing the effectiveness of three different adsorbents for Cd+2 and Cr+6 ions from wastewater effluents of dairy farms, including chitosan (CS), clinoptilolite zeolite (CZ), and chitosan/clinoptilolite zeolite (CS/CZ) composite. The adsorption kinetics of the CS/CZ composite were established using the effects of the key variables (pH, agitation speed, adsorbent concentrations, and contact durations). The removal (%) and adsorption capacities, qe (mg/g), were calculated using the data from the adsorption kinetics. Wastewater samples (n = 60) were collected from the wastewater effluents of five farms. Cd+2 and Cr+6 ion concentrations in all collected samples were determined. Following the CS/CZ composite creation, it was characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (X-RD), and Fourier-transform infrared spectrum (FT-IR). The CS/CZ composite had an adsorption capacity of 92.4 and 96.5 mg/g for both Cd+2 and Cr+6 ions at a concentration of 2.0 g/100 ml, respectively, while the CZ adsorption capacities for the two ions were 87.5 mg/g and 61.0 mg/g, respectively, at 4.0 g/100 ml concentration. The CS was achieved at 55.56 mg/g and 33.3 mg/g, respectively, at the same concentration. The efficiency of heavy metal removal was enhanced by increasing adsorbent concentration, agitation speed, and contact duration. Using CS/CZ composite at 2.0 g/100 ml concentration, 180 min of contact time, and 300 rpm agitation speed, the greatest removal efficiencies for Cd+2 and Cr+6 ions (96.43 and 98.75%, respectively) were demonstrated.

Rapid Determination of Cr3+ and Mn2+ in Water Using Laser-Induced Breakdown Spectroscopy Combined with Filter Paper Modified with Gold Nanoclusters.

Excessive emissions of heavy metals not only cause environmental pollution but also pose a direct threat to human health. Therefore, rapid and accurate detection of heavy metals in the environment is of great significance. Herein, we propose a method based on laser-induced breakdown spectroscopy (LIBS) combined with filter paper modified with bovine serum albumin-protected gold nanoclusters (LIBS-FP-AuNCs) for the rapid and sensitive detection of Cr3+ and Mn2+. The filter paper modified with AuNCs was used to selectively enrich Cr3+ and Mn2+. Combined with the multi-element detection capability of LIBS, this method achieved the simultaneous rapid detection of Cr3+ and Mn2+. Both elements showed linear ranges for concentrations of 10-1000 µg L-1, with limits of detection of 7.5 and 9.0 µg L-1 for Cr3+ and Mn2+, respectively. This method was successfully applied to the determination of Cr3+ and Mn2+ in real water samples, with satisfactory recoveries ranging from 94.6% to 105.1%. This method has potential application in the analysis of heavy metal pollution.

Floating treatment wetlands with Canna indica for the removal of Cr(III) and Cr(VI) from water: A comprehensive study.

The efficiency in Cr (III) and Cr (VI) removal by Floating Treatment Wetlands (FTWs) vegetated with Canna indica, metal accumulation in sediment and plants were determined. Plant tolerance and its morphological response to metal were studied. Treatments were 5 and 10 mg L-1 of Cr(III) (5Cr(III) and 10Cr(III), respectively), and 5 and 10 mg L-1 of Cr(VI) (5Cr(VI) and 10Cr(VI), respectively), with and without FTWs, and a biological control (BC: with FTW without Cr addition). After 35 days, Total-Cr removals in treatments with FTW were 99.6 %, 96.9 %, 96.9 % and 81.7 % in 5Cr(III), 10Cr(III), 5Cr(VI) and 10Cr(VI), respectively. In Cr (III) treatments, the sediment from the reactors without FTW accumulated significantly more metal than the sediments with FTW, while the opposite occurred in the Cr(VI) treatments. Chromium in sediment was accumulated mainly bound to organic matter in all treatments (38-64 %). Roots of C. indica were the main Cr accumulator organ in all treatments (76-88 %). In 10Cr(VI) treatment, Cr was translocated to aerial parts resulting in a decrease in plant biomass and Chlorophyll a concentration. C. indica modified its internal and external root morphology as a mechanism to tolerate Cr toxicity, without affecting removal efficiencies. FTWs vegetated with C. indica were efficient in the remediation of water bodies contaminated with Cr. In addition, these systems have an aesthetic value because they use an ornamental species.

Update on chromium speciation analysis in foods: a review of advances in analytical methods and dietary exposure assessment.

Chromium occurs naturally in different oxidation states. Amongst them, hexavalent chromium is classified as both genotoxic and carcinogenic while trivalent chromium can be considered as an essential element. Therefore, speciation analysis is essential when conducting dietary exposure assessment. Several critical reviews have been published on chromium speciation analysis in foodstuffs in the last decade. However, a method that can account for species interconversion during the extraction procedure has not been reported in the reviews. In recent years, an online method using species-specific isotope dilution mass spectrometry has been developed for the simultaneous determination of trivalent and hexavalent chromium in foodstuffs. Apart from that, new methods based on offline analytical techniques, to analyse trivalent and hexavalent chromium separately, are still under development. Therefore, one of the objectives of this paper is to review these recently published analytical methods and assess whether they are fit for chromium speciation analysis in foodstuffs. Additionally, an objective is also to assess whether their limits of detection are sufficiently low for dietary exposure assessment with respect to the neoplastic effects of hexavalent chromium. Moreover, possible future research gaps are identified based on the current knowledge and existing literature.

Multi-ion detection chemosensor based on rhodamine for turn-on fluorescence sensing and bioimaging of Fe3+, Al3+, Cr3+, and Hg2+ under different channels.

A novel rhodamine-based multi-ion fluorescent sensor, RGN, was designed and synthesized for the highly selective detection of mercury ions (Hg2+) in ethanol and water systems, as well as trivalent cations (Fe3+, Al3+, and Cr3+) in acetonitrile and water systems using a two-step Schiff base reaction method. Nuclear magnetic titration experiments and theoretical calculations demonstrated that the sensor achieved the detection of the aforementioned metal ions through the fluorescence turn-on phenomenon induced by lactam ring-opening. Density functional theory (DFT) calculation results showed decreased HOMO-LUMO energy gaps and increased dipole moments, indicating the effective coordination of the sensor with the corresponding metal ions to form more stable complexes, thereby achieving detection objectives. Furthermore, the fluorescence turn-on sensor RGN exhibited relatively low detection limits, with limits of detection (LOD) for Fe3+, Al3+, Cr3+, and Hg2+ being 10.20 nM, 14.66 nM, 58.78 nM, and 73.33 nM, respectively. Finally, practical applications of sensor RGN in environmental water samples, L929 cells, and zebrafish were demonstrated, indicating its potential for detecting and tracking Fe3+, Al3+, Cr3+, and Hg2+ in environmental samples and biological systems, with prospects for biomedical applications in the diagnosis and treatment of heavy metal ion-induced diseases.

Groundwater Cr(VI) contamination and remediation: A review from 1999 to 2022.

Hexavalent chromium (Cr(VI)) contamination of groundwater has traditionally been an environmental issue of great concern due to its bioaccumulative and highly toxic nature. This paper presents a review and bibliometric analysis of the literature on the interest area "Cr(VI) in groundwater" published in the Web of Science Core Collection from 1999 to 2022. First, information on 203 actual Cr(VI)-contaminated groundwater sites around the world was summarized, and the basic characteristics of the sources and concentrations of contamination were derived. 68.95% of the sites were due to human causes and 56.43% of these sites had Cr(VI) concentrations in the range of 0-10 mg/L. At groundwater sites with high Cr(VI) contamination due to natural causes, 75.00% of the sites had Cr(VI) concentrations less than 0.2 mg/L. A total of 936 papers on "Cr(VI) in groundwater" were retrieved for bibliometric analysis: interest in research on Cr(VI) in groundwater has grown rapidly in recent years; 59.4% of the papers were published in the field of environmental sciences. A systematic review of the progress of studies on the Cr(VI) removal/remediation based on reduction, adsorption and biological processes is presented. Out of 666 papers on Cr(VI) removal/remediation, 512, 274, and 75 papers dealt with the topics of reduction, adsorption, and bioremediation, respectively. In addition, several studies have demonstrated the potential applicability of natural attenuation in the remediation of Cr(VI)-contaminated groundwater. This paper will help researchers to understand and investigate methodological strategies to remove Cr(VI) from groundwater in a more targeted and effective manner.

Simple and sensitive determination of Cr (III), Cu (II) and Pb (II) in tea infusions using AgNPs-modified resin combined with laser-induced breakdown spectroscopy.

The detection of heavy metals in tea infusions is important because of the potential health risks associated with their consumption. Existing highly sensitive detection methods pose challenges because they are complicated and time-consuming. In this study, we developed an innovative and simple method using Ag nanoparticles-modified resin (AgNPs-MR) for pre-enrichment prior to laser-induced breakdown spectroscopy for the simultaneous analysis of Cr (III), Cu (II), and Pb (II) in tea infusions. Signal enhancement using AgNPs-MR resulted in amplification with limits of detection of 0.22 µg L-1 for Cr (III), 0.33 µg L-1 for Cu (II), and 1.25 µg L-1 for Pb (II). Quantitative analyses of these ions in infusions of black tea from various brands yielded recoveries ranging from 83.3% to 114.5%. This method is effective as a direct and highly sensitive technique for precisely quantifying trace concentrations of heavy metals in tea infusions.

Xanthan gum-capped Chromia Nanoparticles (XG-CrNPs): A promising nanoprobe for the detection of heavy metal ions.

The present study reports on the selective and sensitive detection of metals using xanthan gum-capped chromia nanoparticles (XG-CrNPs). The nanoparticles were synthesized by the chemical reduction method using sodium borohydride and xanthan gum as the reducing and capping agents, respectively. The synthesis of XG-CrNPs was confirmed by the appearance of the two absorption peaks at 272 nm and 371 nm in the UV-visible region. The nanoparticles have been extensively characterized by FTIR, TEM-EDX, XRD, and TGA analyses. The well-dispersed XG-CrNPs exhibited a quasi-spherical structure with an average particle size of 3 nm. A significantly low amount (2 µg/L) of XG-CrNPs was used for selective and sensitive detection of heavy metal ions. It showed excellent metal detecting properties by quenching its band gap signal which was extraordinarily conspicuous for Co(II), Hg(II), and Cd(II) in comparison to other metal ions like Ag(I), Ba(II), Mg(II), Mn(II), Ni(II), and Zn(II). The limit of detection of Co(II), Cd(II), and Hg(II) with this nanoprobe was found to be 2.167 µM, 1.065 µM, and 0.601 µM respectively. The nanoparticles manifested higher shelf-life and can be reused up to three consecutive cycles where most of its activity was conserved even after being used. Thus, it may find use in metal sensor devices for the detection of hazardous metals.

A fluorescent chemosensor for selective detection of chromium (III) ions in environmentally and biologically relevant samples.

A simple single step one pot multicomponent reaction was performed to synthesize N-(tert-butyl)-2-(furan-2-yl)imidazo[1,2-a]pyridine-3-amine (TBFIPA). The synthesized TBFIPA was subjected to library of cations to study its ability for selective and sensitive detection of specific metal ions. Selective detection of chromium ions by TBFIPA were found from the significant hypsochromic shift (335 nm â†’ 285 nm) in the UV-Visible spectra. The fluorescent TBFIPA displays complete quenching of fluorescence under UV lamp (365 nm) only in the presence of chromium without the interference of common metal ions. Binding constant (ka) obtained from Benesi-Hildebrand plot is 0.21 × 105 M-1, limit of detection (LOD) and limit of quantification (LOQ) of TBFIPA toward Cr3+ ions are 4.70 × 10-7 M and 1.56 × 10-7 M, respectively. The mechanism proposed during complex formation were supported by stoichiometric Job continuous variation plot, 1H NMR titration and ESI-MS spectroscopic data. All the experimental confirmation for complex formation were corroborated with theoretical DFT studies optimized using RB3LYP/6-31G(d) basis set. The selectivity and sensitivity of TBFIPA toward Cr3+ ions are found suitable to design a user-friendly silica based portable test kit. Alongside, TBFIPA was successfully utilized for imaging onion epidermal cells. Furthermore, the results obtained for biological, environmental, and industrial samples provided solid evidence to estimate chromium ions using TBFIPA in these real samples.

Toxicological profile and potential health concerns through metals and trace elements exposure in brick kiln workers from Lahore, Pakistan.

This study examined levels of lead (Pb), cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), and arsenic (As) in blood, hair, and nails of 18 brick kiln workers from three brick kiln units located around a metropolitan city, Lahore, Pakistan. All the trace elements except Hg and As were detected in the studied matrices of Brick kiln workers. In general, brick kiln workers reflect the highest concentration of Pb, followed by Cd, Cr, and Cu. Of the pollutants analyzed, Pb has the highest mean (min-max) concentrations at 0.35 (0.09-0.65) in blood (µg/mL), 0.34 (0.14-0.71) in hairs (µg/g), and 0.44 (0.32-0.59) in nails (µg/g) of brick kiln workers. Following Pb, the trend was Cd 0.17 (0.10-0.24), Cu 0.11(0.03-0.27), and Cr 0.07 (0.04-0.08) in blood (µg/mL), followed by Cr 0.11(0.05-0.20), Cd 0.09 (0.03-0.13), and Cu 0.08 (0.04-0.16) in hairs (µg/g) and Cu 0.16 (0.05-0.36), Cd 0.13 (0.11-0.17), and Cr 0.10 (0.05-0.14) in nails (µg/g) respectively. Relatively higher concentrations of metals and other trace elements in blood depicts recent dietary exposure. The difference of trace elements except Pb was non-significant (P > 0.05) among studied matrices of workers as well as between Zigzag and traditional exhaust-based brick kilns. The concentrations of Pb, Cd and Cr in blood of brick kilns workers are higher than the values reported to cause health problems in human populations. It is concluded that chronic exposure to metals and other trace elements may pose some serious health risks to brick kiln workers which needs to be addressed immediately to avoid future worst-case scenarios.

Machine learning-assisted chromium speciation using a single-well ratiometric fluorescent nanoprobe.

Chromium is widely recognized as a significant pollutant discharged into the environment by various industrial activities. The toxicity of this element is dependent on its oxidation state, making speciation analysis crucial for monitoring the quality of environmental water and assessing the potential risks associated with industrial waste. This study introduces a single-well fluorometric sensor that utilizes orange emissive thioglycolic acid stabilized CdTe quantum dots (TGA-QDs) and blue emissive carbon dots (CDs) to detect and differentiate between various chromium species, such as Cr (III) and Cr (VI) (i.e., CrO42- and Cr2O72-). The variations of fluorescence spectra of the proposed probe upon chromium species addition were analyzed using machine learning techniques such as linear discriminant analysis and partial least squares regression as a classification and multivariate calibration technique, respectively. Linear discriminant analysis (LDA) demonstrated exceptional accuracy in differentiating single-component and bicomponent samples. Additionally, the findings from the partial least squares regression (PLSR) showed that the sensor created has strong linearity within the 1.0-100.0, 1.0-100.0, and 0.1-15 µM range for Cr2O72-, CrO42-, and Cr3+, respectively. Furthermore, appropriate detection limits were successfully achieved, which were 2.6, 2.9, and 0.7 µM for Cr2O72-, CrO42-, and Cr3+, respectively. Ultimately, the successful capability of the sensing platform in the identification and quantification of chromium species in environmental water samples provides innovative insights into general speciation analytics.

Distribution and bioaccumulation of trace elements in two Cyprinidae fish species in the Indus river, Pakistan, including the impact of hydraulic structure on macroinvertebrates' biodiversity.

The concentration of trace elements (chromium, lead, zinc, copper, manganese, and iron) was determined in water, sediment and tissues of two Cyprinidae fish species - Labeo rohita and Tor putitora - collected from the eight sampling stations of Indus River in 2022 for four successive seasons (autumn, winter, spring, summer), and also study the present condition of macroinvertebrates after the construction of hydraulic structure. The obtained results of trace element concentrations in the Indus River were higher than the acceptable drinking water standards by WHO. The nitrate concentration ranges from 5.2 to 59.6 mg l-1, turbidity ranges from 3.00 to 63.9 NTU, total suspended solids and ammonium ions are below the detection limit (<0.05). In the liver, highest dry wt trace elements (µg/g) such as Cr (4.32), Pb (7.07), Zn (58.26), Cu (8.38), Mn (50.27), and Fe (83.9) for the Labeo rohita; and Tor Putitora has significantly greater accumulated concentration (Cr, Pb, Zn, Cu, Mn, Fe) in muscle and liver than did Labeo rohita species. Additionally, lower number of macroinvertebrates were recorded during the monsoonal season than pre-monsoon and post-monsoon. Local communities surrounded by polluted environments are more probably to consume more fish and expose them to higher concentrations of toxic trace elements (lead and copper). The findings also provide a basis for broader ecological management of the Indus River, which significantly influenced human beings and socioeconomic disasters, particularly in the local community.

Adding carbon sources to the substrates enhances Cr and Ni removal and mitigates greenhouse gas emissions in constructed wetlands.

Constructed wetlands for wastewater treatment pose challenges related to long-term operational efficiency and greenhouse gas emissions on a global scale. This study investigated the impact of adding peat, humic acid, and biochar into the substrates of constructed wetlands and focused on Cr, and Ni removal, greenhouse gas emissions, and microbial communities in constructed wetlands. Biochar addition treatment achieved the highest removal efficiencies for total Cr (99.96%), Cr (VI) (100%), and total Ni (91.04%). Humic acid and biochar addition both significantly increased the heavy metal content in wetland plant Leersia hexandra and substrates of constructed wetlands. Further analysis of microbial community proportions by high-throughput sequencing revealed that biochar and humic acid treatments enhanced Cr and Ni removal efficiency by increasing the abundance of Bacteroidetes, Geobacter and Ascomycota. Humic acid addition treatment reduced CO2 emissions by decreasing the abundance of Bacteroidetes and increasing that of Basidiomycota. Peat treatment decreased CH4 emissions by reducing the abundance of the Bacteroidetes. Biochar treatment increased the abundance of the Firmicutes, Bacteroidetes, Proteobacteria as well as Basidiomycota, resulting in reduced N2O emissions. Biochar and humic acid treatments efficiently removed heavy metals from wastewater and mitigated greenhouse gas emissions in constructed wetlands by modifying the microbial communities.