ABSTRACT
Cadmium (Cd), chromium (Cr), lead (Pb), mercury (Hg) and arsenic (As) are potent toxicants to human health via dietary intake. It is imperative to establish accurate soil thresholds based on soil-plant transfer models and food safety standards for safe agricultural production. This study takes rice genotypes and soil properties into account to derive soil thresholds for five heavy metal(loid)s using the bioconcentration factors (BCF) and species sensitivity distribution (SSD) based on the food safety standard. The BCF generated from two paddy soils was calculated to investigate the sensitivity of heavy metal accumulation in nine rice cultivars in a greenhouse pot experiment. Then, empirical soil-plant transfer models were developed from a middle-sensitivity rice cultivar (Denong 2000, one selected from nine rice) grown in nineteen paddy soils with various soil properties under a proper exogenously metal(loid)s concentration gradient. After normalization, hazardous concentrations from the fifth percentile (HC5) were calculated from the SSD curves, and the derived soil thresholds were obtained from HC5 prediction models that based on the combination of pH and organic carbon (OC) or cation exchange capacity (CEC). The soil Cd threshold derived based on pH and organic carbon (pH < 7.5, OC ≥ 20 g kg-1) was 1.3-fold of those only considering pH, whereas the Pb threshold (pH > 6, CEC ≥ 20 cmolc kg-1) was 3.1 times lower than the current threshold. The derived thresholds for five elements were validated to be reliable through literature data and field experiments. The results suggested that deriving soil heavy metal(loid)s threshold using SSD method and local food safety standards is feasible and also applicable to other crops as well as other regions with potential health risks of toxic elements contamination in agricultural production.
Subject(s)
Metals, Heavy/standards , Oryza/growth & development , Soil Pollutants/standards , Soil/standards , Arsenic/analysis , Arsenic/standards , Cadmium/analysis , Cadmium/standards , Chromium/analysis , Chromium/standards , Crops, Agricultural/growth & development , Crops, Agricultural/standards , Food Safety , Humans , Lead/analysis , Lead/standards , Mercury/analysis , Mercury/standards , Metals, Heavy/analysis , Oryza/chemistry , Oryza/genetics , Soil/chemistry , Soil Pollutants/analysisABSTRACT
Total reflection X-ray fluorescence analysis (TXRF) was used to determine chromium, selenium and bromine concentrations in blood serum samples of 50 patients with parenteral nutrition treatment. The concentrations were measured two times, namely in the first day (I measurement) of the treatment and the seventh day (II measurement) after the chromium and selenium supplementation. For comparison purposes also serum samples of 50 patients without nutritional disorders, admitted to a planned surgical procedure to remove the gall bladder (cholecystectomy), were analyzed and treated as the control group. Descriptive statistics of measured concentrations of Cr, Se and Br both for the studied and control groups was determined. In order to check the effectiveness of Cr and Se supplementation, the results of the first and seventh day measurements for studied group were statistically compared with each other, with literature reference values and with the results of the control group (two-group comparison). These comparisons indicate the effectiveness of selenium supplementation in the applied treatment procedure. In the case of Cr and Br concentrations no statistically significant differences were observed. We conclude that monitoring of the concentration of the important trace elements in human serum should be standard procedure in parenteral nutrition treatment. In this monitoring the TXRF technique can be successfully used.
Subject(s)
Bromine/blood , Chromium/blood , Parenteral Nutrition , Selenium/blood , Adult , Aged , Aged, 80 and over , Bromine/standards , Case-Control Studies , Chromium/standards , Female , Humans , Male , Middle Aged , Reference Values , Selenium/standards , Spectrometry, X-Ray Emission/standardsABSTRACT
BACKGROUND: In 2012, Danish authorities submitted a proposal to the European Chemical Agency restricting the content of hexavalent chromium to a maximum of 3 ppm in leather goods. Following its adoption, this proposal was implemented in 2015 as a directive in the EU. OBJECTIVES: To examine the temporal trend of chromium contact allergy in adult dermatitis patients patch tested between 2002 and 2017, and to determine clinical characteristics and causative exposures in these patients. METHODS: All adult dermatitis patients patch tested between 2002 and 2017 were included. Patch test data were reviewed retrospectively. Comparisons were performed with the χ 2 test and logistic regression analysis. RESULTS: A total of 13 379 adults aged 18 to 99 years were patch tested between 2002 and 2017. The overall prevalence of chromium allergy was 2.2%. An overall decreasing trend was found for the prevalence of chromium allergy (Ptrend = 0.00002). Specifically, a significant difference was found for the study periods 2010 to 2013 (Ptrend = 0.002) and 2014 to 2017 (Ptrend < 0.0001) as compared with 2002 to 2005. Leather remained the most important single cause of allergic contact dermatitis caused by chromium. The proportion of clinically relevant leather exposures increased from 42.3% during 2002 to 2009 to 54.8% during 2010 to 2017 (P = 0.04). CONCLUSIONS: The prevalence of chromium allergy is decreasing. The EU Directive restricting the use of hexavalent chromium in leather goods is thought to be playing a central role in this change.
Subject(s)
Chromium/standards , Chromium/toxicity , Dermatitis, Allergic Contact/prevention & control , Occupational Exposure/standards , Tanning/standards , Clothing/standards , Coloring Agents/standards , Denmark , Dermatitis, Occupational/prevention & control , HumansABSTRACT
This article discusses the effect of chromium(VI) (Cr(VI)) on human health under conditions of acute and chronic exposure in the workplace. Chromium(VI) compounds as carcinogens and/or mutagens pose a direct danger to people exposed to them. If carcinogens cannot be eliminated from the work and living environments, their exposure should be reduced to a minimum. In the European Union the proposed binding occupational exposure limit value (BOELV) for chromium(VI) of 0.025 mg/m³ is still associated with high cancer risk. Based on the Scientific Commitee of Occupational Exposure Limits (SCOEL) document chromium(VI) concentrations at 0.025 mg/m³ increases the risk of lung cancer in 2-14 cases per 1000 exposed workers. Exposure to chromium(VI) compounds expressed in Cr(VI) of 0.01 mg Cr(VI)/m3; is responsible for the increased number of lung cancer cases in 1-6 per 1000 people employed in this condition for the whole period of professional activity.
Subject(s)
Air Pollutants, Occupational/adverse effects , Air Pollution, Indoor/adverse effects , Carcinogens, Environmental/adverse effects , Chromium/adverse effects , Occupational Exposure/adverse effects , Air Pollutants, Occupational/standards , Air Pollution, Indoor/prevention & control , Carcinogens, Environmental/standards , Chromium/standards , Environmental Monitoring/standards , Europe , European Union , Humans , Occupational Exposure/standards , Risk AssessmentABSTRACT
OBJECTIVE: The recent PLATINUM trial has demonstrated that the use of the new generation platinum chromium everolimus-eluting stents (PtCr-EES) yield clinical outcomes similar to those obtained by the use of cobalt chromium everolimus-eluting stents (CoCr-EES) in selected patients with 1 or 2 de novo coronary artery lesions. This study aimed to compare the safety and efficacy of the PtCr-EES and CoCr-EES in unselected patients from a real-life single-center registry. PATIENTS AND METHODS: From July 2009 through November 2010, 788 consecutive patients in our institution with symptomatic coronary artery disease who were treated with the CoCr-EES (n = 410) or PtCr-EES (n = 378) were enrolled into this study. The primary endpoint of the study was target-lesion failure (TLF) at 12-month follow-up and the secondary endpoints were major adverse cardiovascular events and stent thrombosis. RESULTS: The prevalence of TLF in the PtCr-EES group (4.5%) was similar to that in the CoCr-EES group (3.9%). In addition, there were no significant differences in the 12-month rates of cardiac death (2.1% vs. 1.5%), myocardial infarction (2.4% vs. 3.9%), ischemia-driven target lesion revascularization (2.4% vs. 2.2%), and definite or probable stent thrombosis (0.5% vs. 1.5%, all p > 0.05). CONCLUSIONS: At 12-month follow-up, the PtCr-EES is comparable in safety and efficacy to the CoCr-EES in unselected patients with coronary artery diseases.
Subject(s)
Chromium/standards , Cobalt/standards , Coronary Artery Disease/diagnostic imaging , Coronary Artery Disease/surgery , Drug-Eluting Stents/standards , Everolimus/administration & dosage , Percutaneous Coronary Intervention/standards , Platinum/standards , Aged , Female , Follow-Up Studies , Humans , Male , Middle Aged , Percutaneous Coronary Intervention/instrumentation , Radiography , Treatment OutcomeABSTRACT
Cr(VI) is far more soluble and toxic than Cr(III). Sediment pore water was investigated in a river adjacent to the property of a large former tannery, into which Cr-contaminated effluent was discharged over a 55-year period, and where extremely high Cr concentrations have been found in the sediments. Dialysis cells, or peepers, were used to generate depth profiles of Cr concentration in sediment pore water. Samples were analyzed for total Cr using inductively coupled plasma-mass spectrometry (ICP-MS) and for Cr species using high performance liquid chromatography (HPLC)-ICP-MS. The results show an absence of Cr(VI) in all samples. Furthermore, incomplete recovery of Cr(VI) added to the samples collected at the locations with highest sediment Cr concentrations indicate strong reducing conditions at those locations, which are not conducive to the presence of Cr(VI).
Subject(s)
Chromium/analysis , Geologic Sediments/chemistry , Mass Spectrometry , Rivers/chemistry , Water Pollutants, Chemical/analysis , Chromatography, High Pressure Liquid/standards , Chromium/standards , Edetic Acid/chemistry , Ions/chemistry , Mass Spectrometry/standards , Quality Control , Waste Disposal, Fluid , Water Pollutants, Chemical/standardsABSTRACT
The study has been performed on tears of apparently healthy subjects who live and work in urban and rural areas, respectively. After the collection the following elements were investigated: chromium (Cr); arsenic (As); copper (Cu); zinc (Zn); selenium (Se); rubidium (Rb); barium (Ba); lead (Pb) and cobalt (Co). Significantly higher values of As were found in subjects living and working in rural areas as compared to those found in urban area residents (0.290 vs. 0.025; p<0.001). Conversely, Ba and Pb were significantly lower in rural area residents (1.10 vs. 2.50, p=0.027 and 1.70 vs. 1.10, p=0.057, respectively). Our data show that trace elements analysis in tears is possible; further studies could define if it could be a reliable biomarker in persons exposed to high concentration of trace elements due to working or environmental reasons.
Subject(s)
Environmental Exposure/standards , Environmental Pollutants/analysis , Tears/chemistry , Trace Elements/analysis , Arsenic/analysis , Arsenic/standards , Chromium/analysis , Chromium/standards , Cobalt/analysis , Cobalt/standards , Copper/analysis , Copper/standards , Environmental Exposure/analysis , Environmental Exposure/statistics & numerical data , Environmental Pollutants/standards , Humans , Reference Values , Selenium/analysis , Selenium/standards , Trace Elements/standards , Zinc/analysis , Zinc/standardsABSTRACT
To identify specific cases, classes or specific use situations of chemicals for which 'safety thresholds' or 'safety limits' were set (in regulations, standards, in scientific research/clinical work, etc.) and critically review the scientific and methodological parameters used to set those limits.
Subject(s)
Consumer Product Safety/legislation & jurisprudence , Consumer Product Safety/standards , Dermatitis, Allergic Contact/prevention & control , Chromium/standards , Chromium/toxicity , Cosmetics/chemistry , Cosmetics/standards , Cosmetics/toxicity , Dermatitis, Allergic Contact/etiology , European Union , Humans , Models, Theoretical , Nickel/standards , Nickel/toxicityABSTRACT
For those chemicals identified in point 2 above, to collect and critically analyse clinical and statistical evidence on the incidence and morbidity (clinical picture) of skin contact allergy (contact dermatitis) cases in the EU before (at least 3 years) and after the limits were set, so as to allow an assessment of the possible effect of the limits in the reduction/prevention of the incidence and morbidity of contact dermatitis.
Subject(s)
Consumer Product Safety/legislation & jurisprudence , Dermatitis, Allergic Contact/epidemiology , Dermatitis, Allergic Contact/prevention & control , Chromium/standards , Chromium/toxicity , Consumer Product Safety/standards , Cosmetics/chemistry , Cosmetics/standards , Cosmetics/toxicity , Dermatitis, Allergic Contact/etiology , European Union , Humans , Incidence , Morbidity , Nickel/standards , Nickel/toxicityABSTRACT
Cannulated screws, along with guide wires, are typically used for surgical fracture treatment in cancellous bone. Breakage or bending deformation of the guide wire is a clinical concern. Mechanically superior guide wires made of Co-Cr alloys such as MP35N and L605 may reduce the occurrence of mechanical failures when used in combination with conventional (316L stainless steel) cannulated screws. However the possibility of galvanic or crevice corrosion and adverse tissue reaction, exists when using dissimilar materials, particularly in the event that a guide wire breaks, and remains in situ. Therefore, we designed an experiment to determine the tissue reaction to such an in vivo environment. Implant devices were designed to replicate a clinical situation where dissimilar metals can form a galvanic couple. Histological and SEM analyses were used to evaluate tissue response and corrosion of the implants. In this experiment, no adverse in vivo effects were detected from the use of dissimilar materials in a model of a broken guide wire in a cannulated screw.
Subject(s)
Bone Screws , Bone Wires , Metals/standards , Prostheses and Implants/standards , Alloys/chemistry , Alloys/standards , Animals , Chromium/chemistry , Chromium/standards , Cobalt/chemistry , Cobalt/standards , Female , Femur/surgery , Femur/ultrastructure , Materials Testing/standards , Metals/chemistry , Microscopy, Electron, Scanning , Models, Animal , Sheep , Stainless Steel/chemistry , Stainless Steel/standardsABSTRACT
176 chromium-exposed and 30 control subjects were selected for this study. Blood samples (3 ml) were collected for the estimation of chromium. The data on chromium concentration indicated a significant higher level of chromium in the blood of the exposed workers as compared to the control. There was no significant correlation between the mean blood and environmental chromium level. This study suggests that exposure to chromium may have some effect on the health of workers, even though the dose response relationship could not be established between blood chromium and environmental chromium levels. This study suggests that exposure to chromium may have some effect on the health of workers, even though the dose response relationship could not be established between blood chromium and environmental chromium levels. Study also indicates that the environmental levels to Cr are well below the permissible levels at all the sites of the industry at the time of survey even though the blood Cr levels were observed high in 14.8% of workers and some of them were having Cr related morbidity. Therefore, preventive and engineering control measures are suggested to minimize the chromium exposure in the chromium based industry located in Gorwa industrial estate at Baroda, Gujarat. About three months period was taken to complete this study.
Subject(s)
Air Pollutants, Occupational/blood , Chromium/blood , Occupational Exposure/analysis , Air Pollutants, Occupational/analysis , Air Pollutants, Occupational/standards , Chemical Industry , Chromium/analysis , Chromium/standards , Environmental Monitoring , Humans , Occupational Exposure/prevention & control , Threshold Limit ValuesABSTRACT
Corporate infiltration of a panel convened to set standards for chromium(VI) in California, buttressed by the engineered production of dubious "scientific" literature advancing industry's goal, succeeded in skewing the panel's decision to protect industry profits rather than public health. This situation demonstrates the insidious and effective influence of industry on the regulatory process.
Subject(s)
Advisory Committees/standards , Carcinogens/standards , Chromium/standards , Hazardous Substances/standards , Industry/standards , Water Pollution, Chemical , California , Conflict of Interest , Environmental Health/ethics , Environmental Health/organization & administration , Ethics, Business , Health Policy/legislation & jurisprudence , Humans , Policy Making , Power Plants , Scientific Misconduct , Water Pollution, Chemical/legislation & jurisprudenceABSTRACT
The Occupational Safety and Health Administration (OSHA) is amending the existing standard which limits occupational exposure to hexavalent chromium (Cr(VI)). OSHA has determined based upon the best evidence currently available that at the current permissible exposure limit (PEL) for Cr(VI), workers face a significant risk to material impairment of their health. The evidence in the record for this rulemaking indicates that workers exposed to Cr(VI) are at an increased risk of developing lung cancer. The record also indicates that occupational exposure to Cr(VI) may result in asthma, and damage to the nasal epithelia and skin. The final rule establishes an 8-hour time-weighted average (TWA) exposure limit of 5 micrograms of Cr(VI) per cubic meter of air (5 [mu]g/cu m). This is a considerable reduction from the previous PEL of 1 milligram per 10 cubic meters of air (1 mg/10 cu m, or 100 [mu]g/cu m) reported as CrO3, which is equivalent to a limit of 52 [mu]g/cu m as Cr(VI). The final rule also contains ancillary provisions for worker protection such as requirements for exposure determination, preferred exposure control methods, including a compliance alternative for a small sector for which the new PEL is infeasible, respiratory protection, protective clothing and equipment, hygiene areas and practices, medical surveillance, recordkeeping, and start-up dates that include four years for the implementation of engineering controls to meet the PEL. The final standard separately regulates general industry, construction, and shipyards in order to tailor requirements to the unique circumstances found in each of these sectors. The PEL established by this rule reduces the significant risk posed to workers by occupational exposure to Cr(VI) to the maximum extent that is technologically and economically feasible.
Subject(s)
Air Pollutants, Occupational/standards , Chromium/standards , Occupational Exposure/legislation & jurisprudence , Occupational Health/legislation & jurisprudence , Respiratory Tract Diseases/chemically induced , Air Pollutants, Occupational/adverse effects , Chromium/adverse effects , Chromium/metabolism , Chromium/toxicity , Humans , Maximum Allowable Concentration , Respiratory Protective Devices/standards , Skin Diseases/chemically induced , United States , United States Occupational Safety and Health AdministrationABSTRACT
The diatomaceous earth (DE) has an important ability to retain metals such as Cd, Cr, Mn and Pb, which can be used for their stabilization in the environment and for analytical purposes. In this paper a fast on-line preconcentration method for the determination of Cr and Pb in waters by flow injection flame atomic absorption spectrometry is described. Preconcentration was based on the retention of Cr and Pb on a DE immobilized in silica gel at pH 3.0 and subsequent elution with 200 microL of 3 mol L(-1) HCl. The preconcentration factors were 100 and 150 for Pb and Cr respectively, for 16 mL water sample volume. The detection limits under these conditions were 3 ng mL(-1) and 1 ng mL(-1) for Pb and Cr, respectively. The stability of Cr and Pb retained on silica gel-DE columns was established. Silica gel-DE microcolumns with the retained analytes were stored for 2 months at two different temperatures: 4 degrees C and room temperature. At regular time intervals, both metals were eluted and quantified. The results showed the potential of the procedure for sampling and storing water samples for subsequent metal determination, avoiding the problems associated with maintaining species integrity in aqueous solution, and the possibility to of decontaminating polluted spaces.
Subject(s)
Chromium/analysis , Diatomaceous Earth/chemistry , Lead/analysis , Water/analysis , Calibration , Chromium/chemistry , Chromium/standards , Hydrogen-Ion Concentration , Lead/chemistry , Lead/standards , Spectrophotometry, Atomic , Water Pollution/analysisABSTRACT
Chromium can be quantitatively retained as 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP)-tetra-phenylborate(TPB) complex onto microcrystalline naphthalene in the pH range 4.8-5.9 from a large volume of aqueous solutions of various standard samples. After filtration, the solid mass consisting of the chromium complex and naphthalene was dissolved with 5 mL of dimethylformamide and the metal was determined by air-acetylene FAAS. A detection limit of 4 ng/mL for chromium was established. The interference of a large number of anions and cations has been studied and the optimized conditions developed were utilized for the trace determination of chromium in various standard alloys and biological samples.
Subject(s)
Chromium/analysis , Trace Elements/analysis , Anions/adverse effects , Azo Compounds/chemistry , Cations/adverse effects , Chelating Agents/chemistry , Chromium/standards , Environmental Pollutants/analysis , Humans , Sensitivity and Specificity , Spectrophotometry, Atomic/standards , Tetraphenylborate/chemistryABSTRACT
By definition, every essential trace element must have a range of intakes safe from toxicity but adequate enough to meet nutrition requirements. That range is part of the total dose-response curve and its lower and upper limits are delineated on the basis of nutrition and toxicology data, respectively. Close coordination of activities to set these limits is necessary to avoid recommendations that are either impractical (narrow zones of safe and adequate intakes) or contradictory (overlapping limits, i.e., no zones of safe and adequate intakes).
Subject(s)
Nutrition Policy , Trace Elements/analysis , Trace Elements/standards , Biological Availability , Chromium/analysis , Chromium/pharmacokinetics , Chromium/standards , Diet/standards , Homeostasis , Humans , Risk Assessment , Selenium/analysis , Selenium/pharmacokinetics , Selenium/standards , Trace Elements/pharmacokinetics , Zinc/analysis , Zinc/pharmacokinetics , Zinc/standardsABSTRACT
The essentiality and carcinogenicity of chromium depend on its chemical form. Oxidation state and solubility are particularly important in determining the biological effects of chromium compounds. For this reason, total chromium measurements are of little value in assessing its nutritional benefits or its toxicological hazards. Aqueous sodium carbonate-sodium hydroxide solutions have been successfully used for extracting hexavalent chromium from a variety of environmental and biological matrices while preserving its oxidation state. Typical recoveries are 90 to 105% in samples spiked with both trivalent and hexavalent chromium. Determination of hexavalent chromium after extraction with sodium carbonate-sodium hydroxide solution, coupled with the determination of total chromium after nitric acid-hydrogen peroxide digestion, has been applied to the evaluation of chromium speciation in airborne particulates, sludges, and biological tissues.
Subject(s)
Chromium/analysis , Carcinogens, Environmental/analysis , Chemistry Techniques, Analytical , Chromium/chemistry , Chromium/standards , Oxidation-Reduction , Reference Standards , SolubilityABSTRACT
The work verifies data gathered by Occupational Hygiene departments of Sanitary-Epidemiological Stations about workers exposure to chromium compounds in the processing of chrome iron ore. Research showed that 7 plants were involved in the processing of chrome iron ore and that the number of workers directly employed in the process amounted to 215-230. About 150 workers were exposed to high concentrations of chromium compounds which exceeded hygienic standards. All of them were employed only in metallurgical plants. The remaining 80-100 workers subjected to the study exposed to relatively low chromium concentrations were employed in chemical plants and refractory materials plants.