Anatomical characteristics of different tooth groups. Effect on in-office bleaching treatment

AIM: The objective of the present study was to investigate the association between the anatomical characteristics of different tooth groups and the diffusion and bleaching effect of hydrogen peroxide (H2O2). MATERIALS AND METHODS: Computed tomography (CT) images from five patients were used to assess the hard tissue thickness and pulp volume (PV) of four tooth groups: lower (mandibular) incisors (LI), upper (maxillary) incisors (UI), canines (C), and premolars (PM). Additionally, 80 bovine tooth disks were divided into four groups (n = 20) to match the thickness of each tooth group studied. All the specimens were exposed to a 35% H2O2 bleaching gel, with 50 µL applied for 45 min during the first, second, and third sessions. Diffusion was evaluated using the peroxidase enzyme method. Color change analyses (∆E, ∆E00, and ∆WID) were performed after the three application sessions and 7 days after the bleaching treatment using a spectrophotometer. RESULTS: The PM group showed greater thickness and PV, followed by the C, UI, and LI groups (P 0.001). The LI group had six times greater H2O2 diffusion compared with the PM group (P 0.001), while the PM group exhibited a PV nine times larger than the LI group. Furthermore, the LI and UI groups achieved color saturation with one fewer session than the C and PM groups. CONCLUSIONS: Specific tooth groups have anatomical characteristics that interfere with bleaching treatment in terms of the diffusion and whitening effect of H2O2. Furthermore, the diffusion capacity of H2O2 was inversely proportional to the thickness of the tooth groups.

[Transverse characteristics of normodivergent patients in different sagittal skeletal patterns].

PURPOSE: This study aimed to measure and analyze the transverse indicators of normodivergent patients with different sagittal skeletal malocclusions, to explore the transverse characteristics of different sagittal skeletal malocclusions. METHODS: Lateral cephalograms and CBCT of 90 normodivergent patients with skeletal Class Ⅰ, Ⅱ and Ⅲ in their permanent dentition were collected. Dolphin software was applied to measure the widths of the basal bone, alveolar bone, dental arch and buccolingual inclination angle of the corresponding teeth in the maxillary and mandibular canine, premolar and molar areas. SPSS 22.0 software package was applied for statistical analysis of the data. RESULTS: The widths of the mandibular basal bone in canine, premolar and molar areas of skeletal Class Ⅲ were (27.15±2.74), (39.30±2.82) and (59.97±2.93) mm, respectively. The widths of the mandibular alveolar bone of skeletal Class Ⅲ were (25.38±1.78), (34.51±2.28) and (47.72±2.73) mm, respectively. The dental arch widths of the maxillary premolar and mandibular canine areas of skeletal Class Ⅲ were (48.70±2.35) and (30.69±2.31)mm, respectively. The above data of skeletal Class Ⅲ were significantly larger than those of skeletal Class Ⅰ and Ⅱ(P＜0.01). The dental arch widths of the maxillary canine, maxillary molar and mandibular molar areas of skeletal Class Ⅲ were (38.88±1.90), (59.51±3.40) and (56.01±2.86)mm, respectively, which were significantly larger than those of skeletal Class Ⅱ(P＜0.05). The maxillomandibular width difference of basal bone in the canine, premolar and molar areas of skeletal Class Ⅲ were (4.69±2.84), (2.31±2.39) and (3.27±2.05) mm, respectively, which were significantly less than that of skeletal Class Ⅰ and Ⅱ(P＜0.01). Compared with skeletal Class Ⅰ, the maxillary canines and first molars of skeletal Class Ⅱ had larger lingual inclination level, while the maxillary first premolars and first molars of skeletal Class Ⅲ had larger buccal inclination level, the mandibular canines and the mandibular first premolars of skeletal Class Ⅲ had larger lingual inclination level(P＜0.01). CONCLUSIONS: For normodivergent patients, the width of the mandibular base bone, alveolar bone, and maxillary and mandibular dental arch in skeletal Class Ⅲ is the widest, which is more likely to have width discrepancy in basal bone. In skeletal Class Ⅲ, the maxillary teeth are buccally inclined, and the mandibular teeth are ingually inclined. In skeletal Class Ⅱ, the maxillary teeth are lingually inclined, and the mandibular teeth are compensatory upright.

Evaluation of Mesiodistal Angulation of Maxillary Anterior Teeth in Incisal View Using Manual and Digital Methods: An In Vivo Study.

AIM: The aim of the present research was to assess the mesiodistal angulation of the maxillary anterior teeth utilizing Image J computer software, a Profile projector, and a Custom-made jig. MATERIALS AND METHODS: A total of 34 subjects (17 males and 17 females) were chosen from a group of 18-30 years old with bilateral Angle Class I molars and canine relationships. One manual approach (Custom-made jig) and two digital methods (J computer software, a Profile projector) were used to record the mesiodistal angulation in incisal view. The individuals had alginate impressions made, and a facebow was used to capture the maxilla's spatial relationship with the cranium. The articulated cast with the help of mounting ring moved to the specially customized jig, then the angulations was measured in the incisal view after the casts were placed in a semi-adjustable articulator. Data were recorded and statistically analyzed. RESULTS: The mesiodistal angulation in the incisal view via three methods between the 17 males and 17 females has statistically significant different. Although the mesiodistal angulation for maxillary lateral incisor and canine did not show any statistically significant difference, the maximum and minimum values obtained were always greater in males in comparison with the females. This indicates that the positions of six maxillary anterior teeth in the males resulted in the creation of upward sweep of incisal edges of central and lateral incisors which was also referred to as "smiling line" producing masculine surface anatomy more squared and vigorous while feminine surface anatomy being more rounded, soft, and pleasant. There was no statistically significant difference between the right and left sides, indicating bilateral arch symmetry and the symmetrical place of the right teeth compared with the left side's corresponding teeth. CONCLUSION: On conclusion, according to the current study's findings, all three approaches can measure the mesiodistal angulations of maxillary anterior teeth in incisal view with clinically acceptable accuracy. The digital methods, which included using the Image J computer software and the profile projector, achieved more accurate results than the manual method. CLINICAL SIGNIFICANCE: The outcomes of this study's mesiodistal angulations can be used as a reference for placing teeth in both fully and partially edentulous conditions. This study contributes to a better understanding of the importance of achieving the ideal occlusion in the Indian population by placing the maxillary anterior teeth at the proper mesiodistal angulation. How to cite this article: Shadaksharappa SH, Lahiri B, Kamath AG, et al. Evaluation of Mesiodistal Angulation of Maxillary Anterior Teeth in Incisal View Using Manual and Digital Methods: An In Vivo Study. J Contemp Dent Pract 2024;25(4):320-325.

Evaluation of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental Proportion in Kenyans of African Descent.

OBJECTIVES: To evaluate the validity of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental (RED) Proportion among Kenyans of African descent with naturally well-aligned teeth. MATERIALS AND METHODS: Standardized frontal photographic images of the smiles of 175 participants aged 18-35 years were obtained, and Adobe Photoshop was used to analyze and measure the frontal widths of the maxillary central and lateral incisors and canines in triplicate. The average teeth widths were calculated to determine the existence of the Golden Proportion, Golden Percentage, and RED Proportion, and their validity using independent sample t-tests to compare the differences in the mean teeth widths at α < 0.05. RESULTS: The number of male and female participants was 107 (61.1%) and 68 (38.9%), respectively. The Golden Proportion between the maxillary central and lateral incisors was found in 4.0% on the right and 2.8% on the left of all the participants, but between the maxillary lateral incisors and canines was found in only 0.6% on the right of male participants (p < 0.0001). The RED Proportion between the maxillary lateral and central incisors was in the range of 67%-70%, and between the canines and lateral incisors was 82%-84% (p < 0.0001). The proportion of RED was not constant, and gradually increased distally. The Golden Percentage of 15% was observed in the lateral incisors bilaterally; however, in the central incisors and the canines, the Golden Percentage was 22% and 12%, respectively. CONCLUSION: The Golden and RED Proportions were invalid determinants of anterior teeth proportions. The Golden Percentage existed only in the lateral incisors. The Golden Proportion, RED Proportion, and Golden Percentage theories may not be applicable to all populations when designing smiles. Racial and ethnic backgrounds are important considerations to establish objective quantifiable values of anterior tooth proportions that are beneficial for esthetic restorations.

Reliability of predictive models based on the mesiodistal and buccolingual diameters of permanent canine teeth for sex estimation in forensic contexts: A systematic review and meta-analysis.

This study aimed to assess the reliability of predictive models for sex estimation based on permanent canine size. A systematic literature review was performed by following the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA). Six electronic databases were searched as the primary source of information. As a secondary source of information, a manual search was performed to identify additional relevant studies not captured in the initial search. After assessing the methodological quality and risk of bias with the Joanna Briggs Institute Critical Appraisal Tools for Systematic Reviews, the data were subjected to statistical tests for a meta-analysis of diagnostic test accuracy and Higgin's I2 statistic to evaluate the heterogeneity between the eligible studies. The systematic search resulted in 21 studies for qualitative synthesis, and 13 of them were selected for quantitative analysis. The analysis of 25 univariate predictive models showed an estimated sensitivity of 77.2 % and specificity of 67.1 %. Meta-regression analyses were performed for dental arch, the type of diameter and dental region outcomes for these univariate predictive models. Dental arch (p = 0.029) and the dental region of measurement (p = 0.001) were significant modifiers. The analysis of 25 multivariate predictive models showed an estimated sensitivity of 82.6 % and specificity of 70.1 %. There were significant methodological limitations and substantial heterogeneity among the included studies. Based on the results, there is insufficient high-quality scientific evidence to support the safe use of predictive models based on permanent canine measurements as the exclusive method for sex estimation in forensic settings.

Radiographic evaluation of enamel thickness of permanent teeth: relevance and applicability.

OBJECTIVE: This descriptive observational study aimed to determine clinically relevant and applicable data of enamel thickness (ETH), considering the mesio-distal differences of anterior and posterior permanent teeth and their relationships. MATERIAL AND METHODS: The sample consisted of right-sided standardized radiographs of 34 individuals (21 females and 13 males), aged between 13 and 24 (average 16) years, with all permanent teeth intact and without crowding. Four periapical and four interproximal radiographs were obtained and digitized. ETH measurements (mesial to distal contact points at the dentin-enamel junction) were performed after correction for radiographic image magnification. The Students' t-test was applied to the differences between paired means, with the Pearson correlation to evaluate the correlation between them. RESULTS: The mesial and distal ETH increased from the anterior to the posterior teeth. Incisor ETH ranged between 0.60 and 0.84 mm. Canines, premolars, and molars were more than 1.0 mm thick, and molar enamel reached values between 1.26 and 1.44 mm. CONCLUSION: Distal ETH was significantly greater than the mesial ETH, and progressively thicker from the anterior to posterior teeth. Interproximal reduction (IPR) of the lower central and upper lateral incisors should be avoided, reduced, or performed on their distal surfaces. There is a positive and significant correlation between ETH and the mesial and distal surfaces of the teeth. Periapical radiographs and evaluation of the remaining ETH are necessary in cases of retreatment. The location and number of tooth size discrepancies should be considered in treatment planning and appropriately compensated with IPR.

Aesthetic assessment of maxillary lateral and canine implant-supported crowns by laypersons and orthodontists.

INTRODUCTION: The objectives of this study were to evaluate how laypersons and orthodontists evaluate and rank aesthetic parameters of an implant-supported crown (ISC) on the canine position (ISC-C) and lateral position (ISC-L). METHODS: A digital survey of 11 cases, 5 ISC-C, 5 ISC-L and 1 control case without ISC, was distributed to 207 laypersons and 296 orthodontists. All cases included one extraoral photograph and three intraoral photographs. The respondents were asked to identify the ISC and to evaluate the aesthetic parameters regarding colour of the implant (CI), shape of the implant (SI) and gingival colour around ISC (GCI). Differences within and between the groups were tested using Chi-2-test and Independent-Samples t-test. RESULTS: All invited laypersons and 184 orthodontists (62% response rate) answered the survey. Orthodontists (89%) more correctly identified the ISC, regardless of its position, than laypersons (50%) (p < 0.001). Both laypersons (54%) and orthodontists (23%) rated higher proportions of acceptance of CI, SI and GCI in favour for the ISC-L than ISC-C (laypersons: 40%, orthodontists: 10%) (p < 0.001). Assessing each parameter separately, orthodontists rated higher for ISC-L, compared to the ISC-C (p < 0.001). In general, laypersons and orthodontist ranked tooth colour (mean, standard deviation [SD]:8.0,1.5 and 9.0, 1.0) and tooth shape (mean, SD: 8.0, 1.7 and 8.8, 1.2) as aesthetically higher than the gingival colour (mean, SD: 7.2, 2.2 and 8.0, 1.7) (p > 0.001).  Conclusion: Laypersons and orthodontists consider the ISC-L as aesthetically more preferable, compared to the ISC-C.

Are deciduous upper molars and lower canines useful for sex estimation?

OBJECTIVE: This paper investigates whether deciduous upper molars and lower canines have sexual dimorphic features, exploring these teeth' dimensions and the presence of Zuckerkandl's tubercle and Carabelli's cusp on the first and second upper molars. DESIGN: We analyzed 64 pairs of dental plaster casts from 34 females and 30 males aged between 3 and 12 years. We measured the first and second deciduous upper molars and the lower deciduous canines (maximum mesiodistal and buccolingual length), and we registered the presence of the Zuckerkandl's tubercle and the Carabelli's cusp on the first and second upper molars, respectively. RESULTS: Regarding the differentiation between sexes using Carabelli's cusp and Zuckerkandl's tubercle, the classification was not independent of Carabelli's cusp presence only for tooth 65 (p = 0.035). In all other teeth, whether for Carabelli's cusp or Zuckerkandl's tubercle, their presence was similar for both sexes. There were statistically significant differences between sexes (p < 0.05) for the buccolingual measurements of both upper second molars, the first right upper molar, and the right canine. The developed model allowed for a 64.1% accuracy in sex estimation. CONCLUSIONS: The study suggests that while Carabelli's cusp and Zuckerkandl's tubercle in upper deciduous molars don't consistently differ between sexes, tooth size, particularly the buccolingual measurements of certain teeth, including upper deciduous molars and lower canines, may provide a more reliable criterion for sex estimation. The developed model depicted moderate accuracy, underscoring the need for a multifactorial approach when estimating sex from skeletal remains. It suggests that while dental features can contribute to sex estimation, they should be used in conjunction with other skeletal or molecular markers to improve accuracy.

Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.

[A two-dimensional photographic and three-dimensional digital dental model comparative analysis in maxillary anterior teeth].

Objective: To assess the accuracy of two-dimensional (2D) photographs in measuring esthetic parameters of the maxillary anterior teeth by comparing them with measurements obtained from three-dimensional (3D) dental models. Methods: A total of one hundred volunteers (49 males, 51 females, aged 18-23 years) were recruited from School and Hospital of Stomatology, Wuhan University from January to February 2024. 3D digital models of their dentitions were obtained using an intraoral scanner, and standardized frontal 2D intraoral photographs were captured with a digital camera. The lengths, widths and width/length ratio of the bilateral incisors, lateral incisors and canines were measured on both the 3D digital models and the 2D intraoral photographs. The width ratios of adjacent maxillary anterior were also calculated on the 2D intraoral photographs and the frontal view of 3D digital models. Results: The widths of lateral incisors [(5.85±0.60) mm] and canines [(4.73±0.71) mm] and the lengths of canines [(8.72±0.96) mm] in the 2D intraoral photographs were significantly lower than those in 3D digital models [(6.65±0.59), (7.76±0.60), (8.90±0.86) mm] (t=-18.24, P<0.001; t=-54.43, P<0.001; t=-4.40, P<0.001), while there were no significant differences in the lengths and widths of the other teeth (P>0.05). The width/length ratios measured from the 2D intraoral photographs for the lateral incisors and canines (0.74±0.08, 0.55±0.08) were significantly lower than those measured in the 3D digital models (0.84±0.09, 0.88±0.09) (t=-19.68, P<0.001; t=-50.21, P<0.001), and the width/length ratio of the central incisors showed no significant difference between the two groups (P>0.05). The width ratios of canines/lateral incisors and lateral incisors/central incisors measured on the 2D intraoral photographs (0.72±0.06, 0.85±0.11) were significantly smaller than those measured in the frontal view of 3D digital models (0.75±0.06, 0.89±0.11) (t=-9.31, P<0.001; t=-6.58, P<0.001). Conclusions: There is a difference between 2D and 3D measurement results of teeth in the esthetic area and the magnitude of the difference varies with their position in the dental arch. When analyzing the measurement of the anterior teeth, it is necessary to choose the appropriate method according to the target tooth position.

Maxillary Canine Impaction: Assessing the Influence of Maxillary Anatomy Using Cone Beam Computed Tomography.

BACKGROUND The purpose of this study was to evaluate the anatomical characteristics of patients with unilateral impacted canine teeth compared to a control group. Cone beam computed tomography (CBCT) records were retrospectively analyzed. MATERIAL AND METHODS CBCT records of 64 patients with unilateral impacted canine teeth (57.8% female and 42.2% male) and 64 controls (59.4% female and 40.6% male) were retrospectively analyzed. On the CBCT images, intermolar width, arch length, arch perimeter, palatal width in the molar region at cementoenamel junction, palatal width in the molar region at the crest, palatal width in the molar region measured from mid-root level, nasal cavity width, and palatal depth were evaluated. RESULTS In the palatal width measurement from the mid-root variable, the measurement of labially positioned canines was significantly lower than the control group (P<0.05). In terms of intermolar width, the labial positioned impacted canines' values were lower than in the control group. There was a significant difference in terms of the perimeter variable and both palatinally and labially positioned impacted canines were significantly lower than in the control group (P<0.05). All parameters were compared according to sex, and measurements of male patients were significantly higher than in female patients (P<0.05). CONCLUSIONS A labially impacted canine was strongly linked to a decrease in mid-root palatal and intermolar widths. Additionally, impacted canines positioned both palatally and labially were found to result in a reduced arch perimeter. Moreover, male patients with impacted canines exhibited notably greater anatomical measurements compared to female patients.

Cone beam computed tomography assessment of maxillary anterior teeth cervix dimensions in healthy adults for optimal anatomic healing abutments.

OBJECTIVES: The abutments produced with circular symmetry failed to accurately replicate the natural teeth's cervical shapes. The purpose of this study was to measure cervical cross-sections of maxillary anterior teeth using cone beam computed tomography (CBCT) images to design anatomic healing abutments. MATERIALS AND METHODS: CBCT data of 61 patients were analyzed using Ez3D Plus software. Measurements were taken at the cemento-enamel junction (CEJ) and 1 mm coronal to CEJ for maxillary central incisors, lateral incisors, and canines. Various parameters, including area, perimeter, and eight line segments in the distal (a), disto-palatal (b), palatal (c), mesio-palatal (d), mesial (e), mesio-labial (f), labial (g), and disto-labial (h) directions, were used to describe dental neck contours. The ratios (f/b and h/d) were analyzed, and differences based on sex and dental arch morphology were explored. RESULTS: Significant differences were found in area and perimeter between males and females, but not in f/b and h/d ratios. Differences in the f/b ratio were observed among dental arch morphologies for maxillary central incisors, lateral incisors, and canines. CONCLUSIONS: CBCT measurements of cervical cross-sections provide more accurate data for designing anatomic healing abutments. The fabrication of anatomical healing abutments needs to consider the influence of gender on cervical size and to explore the potential effect of arch shape on cervical morphology. CLINICAL SIGNIFICANCE: The novel method provides detailed measurements for the description of dental cervical contours for patients with bilateral homonymous teeth missing. The measurements of this study could be utilized to design more accurate anatomic healing abutments to create desired morphology of peri-implant soft tissue.

Comparative evaluation of volumetric changes following rotary and hand files' canal preparation of primary maxillary canine: an in vitro nano-CT analysis.

PURPOSE: To evaluate the volumetric changes of two recently introduced paediatric rotary file systems in comparison with conventional hand file systems in primary maxillary canines using an ultra-high-resolution nano-computed tomography. METHODS: This in vitro study was performed in extracted primary maxillary canines based on certain inclusion and exclusion criteria. Samples were prepared, and working length was determined after the pre-operative scan using a high-resolution nano-CT device (SkyScan 2214, Bruker, Kontich, Belgium). A single well-experienced paediatric dentist prepared the canals using three file systems: Kedo-S plus, Kedo-SG blue and hand K-files. All samples were subjected to post-operative scans performed similar to pre-operative scans. Image reconstruction was performed with NRecon software for 3D volumetric visualisation and analysis of the root canals. RESULTS: Kedo-SG blue file systems had the highest mean difference in the canal volume (4.05%). Hand K-files had the least difference at (3.71%) of canal volume. Kedo-S plus file system had a moderate mean canal volume difference (3.82%) which is closer to hand K-files. Intergroup comparison between the three groups showed that the mean difference in canal volume was statistically significant between all three file systems (p = 0.000). CONCLUSION: Within the limitations of the current study, rotary file systems produced a significant enlargement of canals as compared to hand files. Kedo-SG blue created a uniform preparation of the canal cervico-apically. Kedo-S plus files were prepared more coronally with minimal preparation apically as close to the preparation of hand files. TRIAL REGISTRATION: Trial registration number: IHEC/SDC/PEDO-2103/22/651, Date of registration: 2022.

Association of mandibular canine impaction and anatomical factors: A multicentre retrospective panoramic study in Latin America.

INTRODUCTION: Mandibular canine impaction is infrequent in dental eruption anomalies and treatment is very challenging. The aim of this multicenter retrospective panoramic study in Latin America was to evaluate panoramic radiographic imaging characteristics of mandibular canine impaction (impaction area, mandibular base contact, transmigration, impaction height and sex) and their associations. MATERIAL AND METHODS: This cross-sectional study evaluated 212 digital panoramic radiographs from three radiological centres in Tingo Maria (Peru), Bogota and Tunja (Colombia). The study included children of both sexes with impacted mandibular canines. Mandibular alpha angle, contact with mandibular basal bone (MBB), impacted sector according to 10 sectors with an adaptation of the Ericson and Kurol method, presence of transmigration and the impacted height were measured and the relationship among these measures was analyzed. Fisher's exact test, Chi-square and binary logistic regression were used. (P<0.05). RESULTS: The mandibular canine impaction showed contact with the MBB (32.08%), dental transmigration (36.79%), mainly located at an apical (40.09%) and sub-apical (36.79%) level. Transmigration mainly occurred in sectors 6 (33.30%) and 10 (25.60%) (P<0.001). It was found that for each year of increase in age, the possibility of contact with the MBB decreased (ß=0.89, P=0.010), and as the alpha angle increased by one degree the probability of contact with the MBB decreased (ß=0.97, P=0.001) and the probability of transmigration increased (ß=1.05, P<0.001). CONCLUSIONS: One third of the impacted canines were in contact with the MBB, while another third presented dental transmigration and were mainly located apically and subapically of the incisor roots. These imaging features should be taken into account when planning orthodontic treatment.

Sexual dimorphism in the enamel-dentine junction (EDJ) of permanent canines of European modern humans.

OBJECTIVES: Dental anthropological investigations into sexual dimorphism have conventionally concentrated on evaluating the dimensions and configuration of the enamel cap of canines. However, the morphology of the crown dentine surface can be closely linked to that of the enamel surface. This link can facilitate examination of crown morphology even when the enamel surface is slightly worn. Here, we determine if the morphology of the enamel-dentine junction (EDJ) differs within (maxillary vs. mandibular) and between a sample of male (n = 26) and female (n = 21) contemporary human permanent canines from Europe. METHODS: The morphological data of the EDJ were gathered employing a template comprising 96 landmarks and sliding semilandmarks. Subsequently, the data underwent analysis through form space principal component analysis following Procrustes registration, utilizing standard 3D geometric morphometric techniques. RESULTS: Significant differences in the morphology of the EDJ were observed between the sexes, particularly concerning the overall shape of the crown, the symmetry of the mesial and distal edges, and the development of the distal accessory ridge. CONCLUSIONS: Sex differences in the morphology of the EDJ could relate in part to retention of the canine-premolar honing complex in males. Our results indicate that analyses of the permanent canine EDJ may potentially provide a novel method for estimating the sex of adult and nonadult skeletons.

Age estimation in adults by canine teeth: a systematic review of the Cameriere method with meta-analysis on the reliability of the pulp/tooth area ratio.

The age estimation of an adult using methods accessible to the forensic routine is a goal pursued by forensic experts. Cameriere, Ferrante and Cingolani (2004) proposed the use of the pulp/tooth area ratio of canine teeth as a promising variable, but its reliability has shown conflicting results in the scientific literature. This article aimed to carry out a systematic review with meta-analysis to verify whether the pulp/tooth area ratio of canine teeth includes a variable that can be used alone to estimate dental age in adults. A systematic search was carried out in six databases using keywords related to the theme in Portuguese, English, and Spanish. The study selection process followed pre-established eligibility criteria. Assessments were carried out regarding risk of bias and publication bias of selected studies, and meta-analysis was carried out considering Pearson's correlation coefficient between pulp/tooth area ratio and chronological age as effect measure. Most selected studies showed low risk of bias; no publication bias was found when all studies were considered, and potential publication bias was found when outliers were removed. Despite the high heterogeneity among studies and the need for more research, it could be observed that the pulp/tooth area ratio has strong negative correlation with chronological age, and the pulp/tooth area ratio could be derived from both periapical radiographs and orthopantomographs. Therefore, it is suggested that there is scientific evidence that the pulp/tooth area ratio obtained from canine teeth is reliable for dental age estimation in adults.

Statistical shape analysis of maxillary palatal morphology in patients with palatally displaced canines.

OBJECTIVE: Maxillary morphology has long been a subject of interest due to its possible impact on palatally and labially displaced canines. This study aims to conduct a comparison of the palate morphology between individuals with palatal and labially displaced canines and control subjects using statistical shape analysis on a coronal cross-sectional of CBCT images. MATERIALS AND METHODS: Patients aged between 12 and 43 years with palatally or labially displaced canines referred to Hamadan School of Dentistry between 2014 and 2019 were recruited for this retrospective study. The sample included 29 palatally displaced canines (PDC), 20 labially displaced canines (LDC), and 20 control groups (CG). Initially, the maxillary palate coronal section was acquired and landmarked in the region between the right and the left first molar. Procrustes and principal component analyses were used to identify the primary patterns of palatal shape variation. Statistical tests were then performed to examine both shape and size differences. RESULTS: According to the results of Hotelling's T2 test, there is a significant difference between the mean shape of palate in PDC and CG (P = 0.009), while the difference between the PDC-LDC and LDC-CG groups is not significant. The longest full Procrustes distance was observed between PDC and CG (distance = 0.043), and the shortest full Procrustes distance was observed between LDC and CG (distance = 0.029). The first two principal components accounted for 84.47% of the total variance. The predictive accuracy of the discriminant analysis model showed that 72.46% of cases were correctly classified into the three study groups. CONCLUSIONS: In terms of centroid size, there was no significant difference in the sectional area between the three groups, but the difference between the mean shape of palate in the PDC and CG groups was significant. The PDC group showed more prominent mid-palatal area in the molar region.

Three-dimensional evaluation of social smile asymmetry in patients with unilateral impacted maxillary canine: a 3D stereophotogrammetry study.

OBJECTIVE: This study aimed to evaluate social smile asymmetry in patients with unilateral impacted maxillary canine on 3D stereophotogrammetric images. MATERIAL AND METHODS: The 3D social smile images of participants with unilateral impacted maxillary canine (n:20) and without impaction as a control group (n:20) were included. The images were recorded with a hand-held 3D stereophotogrammetry device (Fuel3D® Scanify®) and Geomagic Essentials 2 reverse engineering software were used for analyses. After the orientation process of the 3D records, the tissues around the smile area were divided into five morphological regions: cheek, upper lip lateral and medial, and lower lip lateral and medial. The deviation margins in the negative and positive directions for the 95% mesh rate and the total percentages of meshes between - 0.5- and + 0.5-mm deviations were calculated. ICC, paired samples t test, independent samples t test, and the Mann-Whitney U test were used for statistical analyses. RESULTS: In individuals with impacted canine, the amount of maximum positive deviation in the upper lip medial was 5.64 mm ± 1.46 and maximum negative deviation was - 4.6 mm ± 1.17. In the control group, mean of deviation limits for all parameters was less than 1.19 mm ± 2.62, while in individuals with unilateral impacted maxillary canine, the maximum value was 8.34 mm ± 2.23. The mesh percentage between - 0.5 and 0.5-mm deviations was over 95% in all morphological areas in the control group, while in the impacted canine group, the number of meshes within the specified deviation limits was less than 95%. CONCLUSION: Individuals with unilateral impacted maxillary canine exhibit greater asymmetry in social smile compared to the control group, with the asymmetry being most prominent near the corners of the mouth and cheeks. CLINICAL RELEVANCE: Amount of asymmetry was higher in impaction group compared to the control group in social smile. The quantification of a possible smile asymmetry due to the impacted canine is crucial for the diagnosis and treatment planning of orthodontic and/or orthognathic cases for ideal aesthetic results. Hence, smile asymmetry should not be overlooked and should be considered in diagnosis and treatment planning.

Prevalencia del segundo conducto en dientes anteroinferiores usando Tomografía Computadorizada Cone Beam / Second root canal prevalence in lower anterior teeth using Cone Beam Computed Tomography

Introducción: Es un error común pensar que los dientes anteroinferiores, por lo general, tienen un solo conducto radicular con una sola raíz. Sin embargo, un estudio realizado por Vertucci et. al., (1974), mostraron una alta prevalencia (13%) de dos conductos radiculares en los dientes anteroinferiores, lo que estimuló más investigaciones. Objetivo: El propósito de este estudio fue determinar la prevalencia del segundo conducto radicular en los dientes anteroinferiores en una población nicaragüense, estos fueron detectados por medio de tomografía computadorizada (Cone Beam). Materiales y Métodos: En el estudio se analizaron 293 piezas dentales, de canino a canino de la arcada inferior. Para realizar el análisis se utilizó el software libre Radiant DICOM Viewer 2021.2.2, se realizaron cortes sagitales, axiales y coronales para ver la prevalencia del segundo conducto radicular. Resultados: De las 293 piezas dentarias analizadas se encontró que 259 presentaban un solo conducto que correspondía al 88.4% y 34 dientes presentaban dos conductos que correspondían al 11.6%. De acuerdo con el análisis tomográfico, se encontró que en los cortes axiales y sagitales fue donde se observó la presencia del segundo conducto. Con respecto a la presencia del segundo conducto de acuerdo al tercio del canal radicular se identificó que la mayoría se presentó en el tercio medio (52.94%), seguido por coronal (29.41%) y por último el tercio apical (17.65%). De acuerdo con la clasificación de Vertucci se encontró que se presenta un mayor porcentaje del tipo I con 88.40%, seguido por el tipo III con 4.44%, después el tipo V con 3.41%, y el tipo II con 2.39%. El de menor porcentaje fue el tipo VI con 1.37%, mientras que, en las piezas analizadas, no se encontraron los tipos IV, VII y VIII. Conclusión: Basados en los resultados obtenidos en este estudio, la prevalencia de un segundo conducto en dientes anteroinferiores fue de 11.6%.

Title The prevalence of a second root canal in mandibular anterior teeth using Cone Beam Computed Tomography. Abstract Introduction: It is a common misconception that the mandibular anterior teeth usually have a single root canal with a single root. However, a study by Vertucci et. al., (1974), showed a high prevalence (13%) of two root canals in the lower anterior teeth, which stimulated further investigations. Objective: The purpose of this study was to determine the prevalence of the second root canal in the mandibular anterior teeth in a Nicaraguan population, these were detected by means of computed tomography (Cone Beam). Materials and methods: In the study, 293 teeth were analyzed, from canine to canine of the mandibular teeth. To perform the analysis, the free software Radiant DICOM Viewer 2021.2.2 was used, sagittal, axial and coronal views were made to see the prevalence of the second root canal. Results: Of the 293 teeth analyzed, it was found that 259 had a single root canal corresponding to 88.4%, and 34 teeth had two root canals corresponding to 11.6%. According to the tomographic analysis, it was found that the presence of the second root canal was observed only in the axial and sagittal views. Regarding the presence of the second canal according to the third of the root canal, it was identified that the majority presented in the middle third (52.94%), followed by coronal (29.41%) and finally the apical third (17.65%). According to the Vertucci classification, it was found that there is a higher percentage of type I with 88.40%, followed by type III with 4.44%, then type V with 3.41%, and type II with 2.39%. The one with the lowest percentage was type VI with 1.37%, while in the pieces analyzed, types IV, VII and VIII were not found. Conclusion: Based on the results obtained in this study, the prevalence of a second root canal in lower anterior teeth was 11.6%.

Prediction of mesio-distal dimensions of the unerupted permanent canines and premolars using measurements of different groups of erupted teeth: retrospective cross-sectional analysis of digital records in Western Australians.

PURPOSE: Recently, other combinations of teeth are claimed to be better predictors for size estimation of permanent canine and premolars. The present study aimed to determine which combinations of teeth presented an appropriate predictor in Western Australians using digital technology. METHODS: A total of 500 (323 females, 177 males) participants meeting the inclusion criteria were randomly selected from private orthodontic clinics. Mesiodistal dimensions of selected teeth obtained from pre-orthodontic treatment digital records were analyzed using SPSS 20. Fifteen possible combinations of teeth were used to determine the best prediction capability. RESULTS: Different combinations of teeth showed a higher correlation with the sum of permanent canine and premolars. In females, group 13 (Mandibular incisors and maxillary first molars) and in males, group 15 (mandibular incisors, maxillary central incisors, and first molars) and group 14 (mandibular incisors and first molars) showed a higher correlation in maxilla and mandible respectively. Linear regression equations were developed based on the best predictor for each arch and gender. CONCLUSION: Permanent mandibular incisors may not be better predictors when used alone. Newly developed equations, based on different combinations of teeth, more accurately predicted the sum of mesiodistal dimensions of permanent canine and premolars in the Western Australian population.