Evaluation of REFIX Technology on the Remineralization of Artificial Early Enamel Caries Lesion by Laser Speckle Tracking Analysis.

OBJECTIVE: To assess the effectiveness of the REFIX technology in the remineralization process of initial caries simulated on bovine enamel. The assessment involved the analysis of backscatter intensity, which was determined from laser speckle images. METHOD: Twenty-one bovine teeth were divided into three groups: G1 and G7 were submitted to treatment with the REFIX technology for 1 and 7 days, respectively. The control group was treated with deionized water. RESULTS: A significant difference in backscatter was found between the carious and sound areas in all groups (p = 0.0038, p < 0.0001, and p = 0.0002 for the control group, G1, and G7, respectively). The intergroup comparison revealed no significant difference among the groups studied. CONCLUSION: REFIX technology did not alter the optical properties of the samples of bovine teeth with simulated initial caries lesions after 1 and 7 days of treatment.

Radiographic evaluation of enamel thickness of permanent teeth: relevance and applicability.

OBJECTIVE: This descriptive observational study aimed to determine clinically relevant and applicable data of enamel thickness (ETH), considering the mesio-distal differences of anterior and posterior permanent teeth and their relationships. MATERIAL AND METHODS: The sample consisted of right-sided standardized radiographs of 34 individuals (21 females and 13 males), aged between 13 and 24 (average 16) years, with all permanent teeth intact and without crowding. Four periapical and four interproximal radiographs were obtained and digitized. ETH measurements (mesial to distal contact points at the dentin-enamel junction) were performed after correction for radiographic image magnification. The Students' t-test was applied to the differences between paired means, with the Pearson correlation to evaluate the correlation between them. RESULTS: The mesial and distal ETH increased from the anterior to the posterior teeth. Incisor ETH ranged between 0.60 and 0.84 mm. Canines, premolars, and molars were more than 1.0 mm thick, and molar enamel reached values between 1.26 and 1.44 mm. CONCLUSION: Distal ETH was significantly greater than the mesial ETH, and progressively thicker from the anterior to posterior teeth. Interproximal reduction (IPR) of the lower central and upper lateral incisors should be avoided, reduced, or performed on their distal surfaces. There is a positive and significant correlation between ETH and the mesial and distal surfaces of the teeth. Periapical radiographs and evaluation of the remaining ETH are necessary in cases of retreatment. The location and number of tooth size discrepancies should be considered in treatment planning and appropriately compensated with IPR.

Clinical, Radiographic, and Histological Changes in Enamel and Dentin, According to Caries Care International™ Evaluation, In Permanent Posterior Teeth: An Observational Study / Cambios Clínicos, Radiográficos e Histológicos en Esmalte y Dentina, Según Evaluación de Caries Care International™, en Dientes Posteriores Permanentes: Un Estudio Observacional

SUMMARY: CariesCare International ™ practical guide is a tool for the comprehensive assessment and treatment of caries that synthesizes clinical and radiographic diagnosis and risk factors, classifying the severity, progression, and activity of lesions. The objective of this study was to analyze the validity and prediction characteristics of the proposed dental caries classification in the CariesCare International ™ practical guide as a reference through clinical and radiographic evaluation versus histological evaluation. Ninety-seven permanent posterior teeth were evaluated, and clinical and radiographic diagnoses were determined according to parameters defined in the CariesCare International™ guide as a reference. Subsequently, histological evaluation was performed to compare each stage of dental caries progression, and statistical analysis was applied. When comparing the validity and prediction values between radiographic and clinical diagnoses in relation to histological evaluation, a low sensitivity and high specificity relationship was found. The sensitivity and specificity percentages between the clinical and radiographic methods show that the clinical method has a lower number of false negatives. Histological changes in dental tissue were evident from the earliest stages of lesions, even in those not related to the caries process, indicating that the dentist should be careful when deciding on a treatment plan and take into account all variables involved in the caries process, as proposed by the CariesCare International ™ guide.

La guía práctica CariesCare International™ es una herramienta para la evaluación y tratamiento integral de la caries que sintetiza el diagnóstico clínico y radiográfico y los factores de riesgo, clasificando la gravedad, progresión y actividad de las lesiones. El objetivo de este estudio fue analizar la validez y características de predicción de la clasificación de caries dental propuesta en la guía práctica CariesCare International™ como referencia a través de la evaluación clínica y radiográfica versus la evaluación histológica. Se evaluaron noventa y siete dientes posteriores permanentes y se determinaron diagnósticos clínicos y radiográficos según parámetros definidos en la guía CariesCare International™ como referencia. Posteriormente se realizó una evaluación histológica para comparar cada etapa de progresión de la caries dental y se aplicó análisis estadístico. Al comparar los valores de validez y predicción entre los diagnósticos radiológicos y clínicos en relación con la evaluación histológica, se encontró una relación de baja sensibilidad y alta especificidad. Los porcentajes de sensibilidad y especificidad entre el método clínico y radiográfico muestran que el método clínico tiene un menor número de falsos negativos. Los cambios histológicos en el tejido dental fueron evidentes desde las primeras etapas de las lesiones, incluso en aquellas no relacionadas con el proceso de caries, lo que indica que el odontólogo debe tener cuidado al decidir un plan de tratamiento y tener en cuenta todas las variables involucradas en el proceso de caries, tal como propone la guía CariesCare International™.

Enamel Caries Lesion Depth Obtained by Optical Coherence Tomography and Transverse Microradiography: A Comparative Study.

INTRODUCTION: Visual imaging of subsurface caries lesions is of vital interest in dentistry, which can be obtained by invasive radiography technique as well as by available non-destructive imaging approaches. Thus, as a first step toward the development of a new innovative approach, Spectral-domain optical coherence tomography (SD-OCT) was applied to detect the lesion depth in comparison to the established reference technique (transverse microradiography [TMR]). METHODS: Bovine enamel specimens were demineralized for 5 days, following previous studies. For OCT, the resulting artificial lesions were scanned three-dimensionally (SD-OCT) and semi-automated measured (CarLQuant). For TMR, specimens were sectioned and the lesion depth was manually determined (Inspektor Research System). RESULTS: The range of lesion depth detected with OCT was 24.0-174.0 µm (mouth rinse study), 18.0-178.0 µm (toothpastes study) and with TMR 59.2-198.0 µm (mouth rinse study), 33.2-133.4 µm (toothpastes study). We found a strong correlation between both methods in terms of lesion depth (Spearman rankwith outlierp < 0.001, Rho = 0.75, Spearman rankwithout outlierp = 0.001, Rho = 0.79). The two methods produce similar results (Passing-Bablok regression, 1.16). As deeper is the lesion, the smallest is the difference between both methods as indicated by Bland-Altman-plots. CONCLUSION: Especially in the case of deep lesions, the values obtained by both methods are in agreement, and OCT can potentially substitute TMR to detect and assess lesion depth with the benefit of being non-destructive.

Optical coherence tomography and gray scale digital analysis as noninvasive techniques for evaluating molar-incisor hypomineralization severity: A comparative study with microcomputed tomography.

Molar-incisor hypomineralization (MIH) is a qualitative defect of dental enamel characterized by demarcated opacities present in permanent first molars and other teeth. It is considered a major clinical challenge in dentistry because it makes affected teeth more susceptible to fractures and dental caries. Its diagnosis is mainly clinical and there are few technological resources that allow for a more accurate diagnosis, especially with respect to the depth of the defect in the dental enamel. In this context, optical coherence tomography (OCT), which is routinely used in ophthalmology, can produce images of the depth of the dental enamel, making it a promising method. In this study, 33 teeth with different MIH severities were evaluated using OCT and microcomputed tomography (microCT). Semi-quantitative methods of grayscale pattern analysis were used to compare images obtained from different severities of MIH with the mineral density obtained through microCT. MicroCT evaluation revealed that hypomineralized enamel had a significantly lower mineral density than intact enamel. However, this difference was not observed between the mild and severe MIH lesions. In the OCT evaluation, significant differences were observed between the intact and hypomineralized enamel, and the gray value comparison provided a method for quantitative differentiation between the two. This study suggests that OCT could be a useful adjunct to traditional diagnostic methods for MIH, offering a noninvasive approach to evaluate enamel defects. RESEARCH HIGHLIGHTS: Combining optical coherence tomography with grayscale digital analysis shows potential as a promising method for diagnosing molar-incisor hypomineralization and assessing its level of severity.

Effect of composite radiopacity and margin location of the restoration on the diagnosis of secondary caries.

This research aimed to evaluate the effect of the radiopacity of a Bulk-Fill composite (X-TraFil, VOCO, Germany) and a Conventional composite (P60, 3M ESPE, USA) and assessment of the margin location in the enamel and dentin on the diagnosis of secondary caries. 76 intact premolars with MOD preparation were divided into two equal groups and filled with the conventional and bulk-fill composite. Four regions were considered to simulate carious lesions (two regions in enamel and two regions in dentin). In each group, half of the regions in the dentin and half in the enamel were randomly selected for secondary caries simulation and filled with a wax-plaster combination while the remaining regions stayed intact. Bitewing imaging was done using the PSP digital sensor. Five examiners reviewed the images, and lesions were recorded. Caries diagnosis indicators and paired-sample t-test were used for statistical analysis. The reproducibility and accuracy of the examiners' responses were evaluated using the kappa and agreement coefficient (α=0.05). The sensitivity, specificity, and accuracy of diagnosing secondary carious lesions in enamel were significantly better under conventional than bulk-fill composite. Similarly, the sensitivity and accuracy of diagnosing secondary caries in dentin were significantly higher under conventional composite than bulk-fill composite (p<0.05). No significant differences were found in the agreement and kappa coefficient between conventional and bulk-fill composites in the enamel and dentin (p>0.05). The diagnostic accuracy of carious lesions was higher under conventional composite than bulk-fill composite. However, the location of the secondary was ineffective in caries diagnosis.

Evaluation of Dental Enamel Thickness in Maxillary Teeth of Alouatta guariba clamitans, Alouatta caraya, and Sapajus nigritus by Cone Beam Computed Tomography.

Tooth enamel thickness is widely studied in primates and is important in differentiating taxa and in interpreting diet and feeding behavior. The objective of this study was to measure enamel thickness and discuss whether the results can be associated with different feeding patterns. Thirty-four syncraniums of Alouatta guariba clamitans, Alouatta caraya, and Sapajus nigritus were subjected to cone beam computed tomographic (CBCT) scans, and the dental enamel was measured in different regions of the crown using the multiplanar reconstruction tool. The differences observed indicate that for many variables and teeth, A. guariba clamitans showed significantly higher values compared to the other 2 species, with the exception of the cuspid region. Although the A. guariba clamitans is a folivorous species, it showed thicker enamel for most of the variables. CBCT was efficient in performing the measurements, allowing analysis of the syncraniums.

Longitudinal assessment of dental erosion-abrasion by cross-polarization optical coherence tomography in vitro.

This study tested a novel in vitro dental erosion-abrasion model and the performance of cross-polarization optical coherence tomography (CP-OCT) in longitudinally monitoring the simulated lesions. Thirty human enamel specimens were prepared and randomized to receive three dental erosion-abrasion (EA) protocols: severe (s-EA, lemon juice/pH:2.5/4.25%w/v citric acid), moderate (m-EA, grapefruit juice/pH:3.5/1.03%w/v citric acid) and no-EA (water, control). EA challenge was performed by exposing the specimens to acidic solutions 4x/day and to brushing 2x/day with 1:3 fluoridated toothpaste slurry, for 14 days. Enamel thickness measurements were obtained using CP-OCT at baseline (D0), 7 (D7) and 14 days (D14) and micro-computed tomography (micro-CT) at D14. Enamel surface loss was measured with both CP-OCT and optical profilometry at D0, D7 and D14. Data was analyzed with repeated-measures ANOVA and Pearson's correlation (r) (α = 0.05). CP-OCT enamel thickness decreased over time in the s-EA group (D0 >D7 > D14, p < 0.001) and m-EA group (D0 > D14, p = 0.019) but did not change in the no-EA group (p = 0.30). Overall, CP-OCT and micro-CT results at D14 correlated moderately (r = 0.73). CP-OCT surface loss was highest for s-EA (p <0.001) but did not differ between moderate and no-EA (p = 0.25). Enamel surface loss with profilometry increased with severity (no-EA>m-EA>s-EA, p < 0.001). D14 surface loss was higher than D7 for both methods except for the no-EA group with profilometry. CP-OCT and profilometry had moderate overall correlation (r = 0.70). Our results revealed that the currently proposed in vitro dental erosion-abrasion model is valid and could simulate lesions of different severities over time. CP-OCT was a suitable method for monitoring the EA lesions.

Evaluation of enamel thickness of mandibular incisors.

OBJECTIVE: To measure enamel thickness at the proximal surfaces of the mandibular incisors, using micro-computed tomography (micro-CT) scans. MATERIAL AND METHODS: Forty-one single-rooted mandibular incisors were selected and analyzed according to anatomical characteristics, to form three groups: Group 1 - central incisors (n = 18); Group 2 - right lateral incisors (n = 10); and Group 3 - left lateral incisors (n = 13). First, enamel thickness at the proximal contact areas of the mandibular incisors was measured. Second, the mesial and distal surfaces of the lateral incisors were compared. Finally, the relationship between the tooth width and the mean enamel thickness was determined. Each tooth was scanned with a micro-CT scanner, and the image was processed with SCANCO micro-CT onboard analysis software. RESULTS: There were no statistically significant differences in mean enamel thickness between the mesial and distal surfaces for each lateral incisor, or between contralateral lateral incisors. In all surfaces analyzed, the upper zones had statistically significantly thinner enamel (0.52 ± 0.10 mm) when compared to the middle and lower zones (0.60 ± 0.08 mm and 0.59 ± 0.08 mm, respectively). There was no correlation (r =0.07) between enamel thickness of the mandibular incisor and the tooth width. CONCLUSIONS: The enamel thickness of the mandibular incisors is similar on the mesial and distal surfaces, with the thinnest layer located at the upper zone.

Translucency and Radiopacity of Dental Resin Composites - Is There a Direct Relation?

OBJECTIVES: The purpose of this study was to correlate the translucency degree of varying resin composites with their radiopacity. METHODS AND MATERIALS: Twenty-four resin composites (conventional or bulk-fill) of various shades and opacities were selected from the following manufacturers: 3M ESPE (nanofilled), Ivoclar (nanohybrid), and FGM (microhybrid). Resin composite samples (n=5) were prepared (5-mm diameter × 1.5-mm thickness) for comparison using prepared samples of human dentin and enamel as controls. The translucency of each sample was measured using the translucent parameter (TP) method with a digital spectrophotometer (Vita Easyshade) and CIEL*a*b* color system over white and black backgrounds. The samples were also x-rayed using a photostimulable phosphor plate system for measurement of their radiopacity (in mmAl). All data were analyzed using one-way ANOVA and Student-Newman-Keuls (α=0.05); data for TP and radiopacity were correlated using the Spearman correlation test. RESULTS: Overall, the translucent shades and bulk-fill resin composites showed greater translucency than the other resins. While "body" and "enamel" shades demonstrated intermediate translucency to dentin and enamel, the "dentin" shades were more standardized, showing similar translucency to human dentin. All tested resin composites showed similar or greater radiopacity to human enamel, except the Empress Direct (Ivoclar) resin with Trans Opal shade, which was not radiopaque. Dentin and enamel showed radiopacity similar to 1 and 2 mmAl (millimeters of aluminum), respectively. CONCLUSIONS: The resin composites investigated in this study differed regarding their translucency degree and radiopacity level, without any positive relationship between the two properties.

Automatic exposure compensation in intraoral digital radiography: effect on the gray values of dental tissues.

BACKGROUND: This study aimed to investigate the effect of automatic exposure compensation (AEC) of intraoral radiographic systems on the gray values of dental tissues in images acquired with or without high-density material in the exposed region using different exposure times and kilovoltages. The influence of the distance of the high-density material was also investigated. METHODS: Radiographs from the molar region of two mandibles were obtained using the RVG 6100 and the Express systems, operating at 60 and 70 kV and 0.06, 0.10, and 0.16 s. Subsequently, a titanium implant was inserted in the premolar's socket and other images were acquired. Using the ImageJ software, two regions of interest were determined on the enamel, coronary dentine, root dentine, and pulp of the first and second molars to obtain their gray values. RESULTS: In the RVG 6100, the implant did not affect the gray values (p > 0.05); the increase in kV decreased it in all tissues (p < 0.05), and the exposure time affected only the root dentine and pulp. In the Express, only enamel and coronary dentine values changed (p < 0.05), decreasing with the implant presence and/or with the increase in exposure factors. The distance of the implant did not affect the results (p > 0.05). CONCLUSIONS: AEC's performance varies between the radiographic systems. Its effect on the gray values depends not only on the presence or absence of high-density material but also on the kV and exposure time used.

Radiographic pattern of inactive occlusal enamel lesions and its relationship with caries progression over 4-5 years.

OBJECTIVE: To assess the radiographic pattern of inactive enamel caries lesions (IECL) in the occlusal surfaces of permanent molars and to investigate whether the presence of radiolucency at baseline could predict lesion progression over 4-5 years. METHODS: A prospective cohort study followed 193 schoolchildren from southern Brazil. At baseline, clinical and radiographic examinations were performed. After 4-5 years, clinical examination was repeated following the same protocol. Logistic regression models were used to investigate the relationship between the presence of radiolucency at baseline and caries progression. RESULTS: This study included 916 permanent molars, classified as sound occlusal surfaces (n = 434), non-cavitated IECL (n = 438), or cavitated IECL (n = 44) at baseline. The proportion of lesions with radiolucency increased as lesion severity increased (p<0.001, chi-square test). The proportion of cases that progressed was significantly higher among teeth showing radiolucency at baseline than among teeth without radiolucency (p<0.001, chi-square test). The presence of radiolucency at baseline was found to be a predictor of caries progression (activity criteria, adjusted OR=3.37, 95%CI=1.66-6.82, p<0.001; severity criteria, adjusted OR=4.01, 95%CI=1.85-8.72, p<0.001). CONCLUSION: Occlusal surfaces (either sound or with IECL) presenting radiolucency at baseline were more likely to progress over 4-5 years of monitoring and should be monitored more closely. CLINICAL RELEVANCE: Bitewing radiographs, when available, may be used to identify which surfaces/lesions are more likely to progress and thus, to define proper recall intervals for patient monitoring.

Maxillary incisor enamel defects in individuals born with cleft lip/palate.

Cleft lip with or without cleft palate (CLP) is considered the most frequent congenital malformations of the head and neck, with cleft individuals exhibiting more chances of presenting abnormalities such as developmental defects of enamel (DDE). Matrix metallopeptidase 2 (MMP2) is a membrane-bound protein with collagen-degrading ability and has important roles in tooth formation and mineralization. The aim of this study was to evaluate the frequency, location, severity and extent of DDE found in the maxillary incisors for groups of individuals born with CLP, as well as understanding their relationship with the cleft side. Besides, this study addresses the hypothesis that DDE can be influenced by variation in the MMP2 genes (rs9923304). Individual samples, clinical history, intraoral photographs and panoramic radiographs were obtained from 233 patients under treatment at the Cleft Lip and Palate Service of the University Hospital Lauro Wanderley at the Federal University of Paraíba. Digital images were examined by the same evaluator using the Classification of Defects According to the Modified DDE Index, and then loaded into the Image Tool software, where two measurements were made: total area of the buccal surface (SA) and the area of the DDE (DA), obtaining the percentage of the surface area affected (%SAD) (ICC = 0.99). Genomic DNA was extracted from saliva samples from 124 participants. Genotyping was carried out using TaqMan chemistry for one marker in MMP2 (rs9923304). Statistical analyses were performed by The Jamovi Project software. The Shapiro-Wilk test was applied, followed by the Student's t-test and the Mann-Whitney test. Chi-square and Fisher's exact tests, and odds ratio (OR) with 95% confidence interval (CI) calculations were used to determine Hardy-Weinberg equilibrium and statistically significant differences with an alpha of 0.05. No significant differences in the prevalence and extent of enamel defects were found between male and female individuals born with CLP (p = 0.058256). The frequency of individuals presenting teeth with DDE, in relation to the cleft and non-cleft side, was statistically different (p <0.001; OR = 7.15, CI: 4.674> 7.151> 10.942). However, the averages of %SAD were similar (p = 0.18). The highest means of the %SAD were found in individuals with bilateral cleft lip with or without cleft palate (BCLP) when compared to individuals with unilateral cleft lip with or without cleft palate (UCLP), for the teeth inside (IA) and outside the cleft area (OA) (p <0.001). Regardless of the cleft side, individuals with BCLP were 7.85 times more likely to have more than one third of the tooth surface affected, showing more frequently defects in the three thirds (OA: p <0.001) (IA: p = 0.03), as well as a higher frequency of more than one type of defect (OA: p = 0.000358) (IA: p = 0.008016), whereas in UCLP, defects were isolated and restricted to only one third, more frequently, the incisal third (OA: p = 0.009) (IA: p = 0.001), with greater frequency of milder defects, such as demarcated (p = 0.02) and diffuse (p = 0.008) opacities. A higher frequency of the T allele, less common, was observed in the group of CLP individuals who had all the affected teeth or at least two teeth with %SAD greater than 20% (p = 0.019843). Our results suggest that MMP2 may have a role in the cases that presented DDE and genotyping rs9923304 could serve as the basis for a genomic approach to define risks for individuals born with CLP. Frequency and severity of DDE is strongly related to the CLP phenotype, since the highest values were found for BCLP. However, the extent of the DDE is independent of its relationship with the side of the cleft.

A Novel Method Using Confocal Laser Scanning Microscopy for Three-Dimensional Analysis of Human Dental Enamel Subjected to Ceramic Bracket Debonding.

The aim of this in vitro study was to present a method using confocal laser scanning microscopy for three-dimensional analysis of human dental enamel subjected to ceramic bracket debonding. The labial enamel surfaces of three upper central incisors were prepared and mounted in the form of standardized specimens. A sample repositioning protocol was established to enable surface measurement and analysis before and after bracket debonding. Observations were made of representative areas measuring 1,280 × 1,280 µm2, in the center of the enamel samples, as well as of the total topography (2,500 × 3,500 µm) of the bonding areas provided by the equipment software. Noncontact three-dimensional high-resolution image analyses revealed the capabilities of the employed technique and methodology to permit the examination of specific characteristics and alterations on the surfaces, before and after the debonding and finishing procedures. The new protocol was effective to provide qualitative and quantitative assessments of changes on the same dental surfaces at different trial times. The methodology constitutes a feasible tool for revealing the effects of debonding of ceramic brackets on sound and previously injured dental enamel surfaces.

Radiographic pattern of underlying dentin lesions (ICDAS 4) in permanent teeth.

OBJECTIVE: To assess the radiographic pattern of underlying dentine shadows (UDS) in the occlusal surfaces of permanent teeth. METHODS: A total of 282 permanent posterior teeth pertaining to 91 individuals, 142 UDS and 140 non-cavitated enamel lesions (NCEL), were included for comparison. UDS was defined as shadows of discolored dentin visible through the enamel surface which may or may not show signs of localized enamel breakdown, classified as code 4 by the International Caries Detection and Assessment System group. Data collection included the application of a questionnaire, clinical examination, and bilateral bitewing radiographs. The risk for presenting radiolucency was estimated using logistic regression model with generalized estimating equations. RESULTS: Approximately 79% of UDS exhibited no radiolucency. The proportion of teeth exhibiting a radiolucency restricted to the enamel-dentin junction was 20.4% for UDS and 3.6% for NCEL (p < 0.001, chi-square test). UDS had a sixfold increased risk for exhibiting radiolucency compared with NCEL (OR = 5.78, 95% CI = 2.73-12.22, p < 0.001). Despite this finding, it is important to highlight that virtually all cases were located at the enamel-dentin junction, and only one tooth in each category of clinical status exhibited radiolucency at the outer one half of dentin. No tooth exhibited radiolucency reaching the deep dentin. CONCLUSION: The present study showed that UDS presented radiolucency in very few cases. The vast majority of lesions showed no radiolucency. CLINICAL RELEVANCE: Our findings suggest that only a small proportion of UDS would demand restorative treatment.

Enamel pearl diagnosed by cone beam computed tomography: A clinical case report.

Little research has been performed on tomographic observations of the dental development anomaly known as enamel pearl. This article presents a clinical case report in which enamel pearl was detected through cone beam computed tomography (CBCT). In this study, a patient was referred to undergo a CBCT of the left maxillary molar region, due to the patient's pain symptoms in this region. The CBCT showed the existence of an enamel pearl in tooth 27. A precise diagnosis made it possible for the patient to begin the preventive treatment against periodontal disease in tooth 27.

Accuracy of visual and image-based ICDAS criteria compared with a micro-CT gold standard for caries detection on occlusal surfaces.

The aim of this study was to check the in vitro accuracy of ICDAS criteria on digital images compared to visual examination for the diagnosis of occlusal caries against a micro-CT gold standard. ICDAS was scored in 40 extracted permanent molars by means of visual inspection and stereomicroscopic images. Visual examinations were performed in duplicate and at a one-week interval by three different calibrated examiners. The analysis of digital images by ICDAS criteria was also performed in duplicate, 1 month after visual examinations. The detection methods were compared by means of sensitivity, specificity, area under the curve, predictive positive and negative values, and accuracy for two different thresholds (1- sound vs. carious teeth; 2- tooth requiring operative vs. non-operative treatment). Sensitivity and accuracy values for threshold 1 in the visual ICDAS and image-based ICDAS methods were high for sensitivity (0.93 and 0.97) and for accuracy (0.83 and 0.85), but low for specificity (0.55 for both methods). Specificity values for threshold 2 were 0.77 and 0.82, while sensitivity was 0.33 and 0.28 for each method. Spearman's rank correlation coefficient was 0.53 and 0.43 (p<0.05) for visual and image-based ICDAS compared to the gold standard scores. Both visual and image-based ICDAS scores were similar to each other in terms of diagnostic accuracy when compared to the micro-CT gold standard. Low specificity for the presence of caries and sensitivity for the detection of caries requiring operative treatment were found.

Effect of Rubber Dam Clamps on Demineralized Cervical Enamel of Permanent Teeth.

PURPOSE: To evaluate the effect of two molar clamps on artificially demineralized enamel of permanent teeth after three periods of isolation. METHODS: Twenty extracted third molars were immersed in a biological solution for development of artificial white spot lesions and then were equally divided into two groups according to the clamp being placed (Group G205: clamp no. 205; Group G26: clamp no. 26). The loss of fluorescence and lesion area of demineralized surface after each isolation were assessed by quantitative light-induced fluorescence. RESULTS: There were significant statistical differences in artificially induced white spot lesions after the second and third clamp placement with both clamps. There was also a significant difference in quantitative light-induced fluorescence readings between groups when molar clamps were placed for the third time. CONCLUSION: It is possible to lose dental structure when using rubber dam clamps on teeth with white spot lesions in the cervical enamel.

Natural enamel caries in quinoline: Volumetric data and the pattern of infiltration.

This study aimed to test the hypotheses that (i) a parameter related to permeability, αd (ratio of squared water volume by the nonmineral volume) is, among all major component volumes (mineral, water, and organic volumes) the best predictor of quinoline infiltration in natural enamel caries (NEC), and (ii) the pore volume fraction infiltrated by quinoline (Vqui ) in NEC is much lower than previous estimates that neglected water and organic enamel volumes. Mineral and nonmineral volumes and αd were measured at 341 histological points (from 20 approximal NEC lesions), and transport of quinoline was tracked by orientation-independent polarizing microscopy. R2 values of Vqui were 0.596 (αd ), 0.033 (mineral volume), 0.474 (water volume), and 0.011 (organic volume). Vqui values were 23% (body of the lesion), 7% (dark zone), and 9% (translucent zone), lower than previous estimates (with high effect size). Transport of quinoline occurred both parallelly and perpendicularly to prism paths, and dark zones were seen where only transport parallel to prisms occurred. In conclusion, αd was the main predictor of quinoline infiltration, but it differed from the water volume with a small effect size, and the pore volume fraction with quinoline was much lower than previous estimates.

Accuracy of visual and image-based ICDAS criteria compared with a micro-CT gold standard for caries detection on occlusal surfaces

Abstract The aim of this study was to check the in vitro accuracy of ICDAS criteria on digital images compared to visual examination for the diagnosis of occlusal caries against a micro-CT gold standard. ICDAS was scored in 40 extracted permanent molars by means of visual inspection and stereomicroscopic images. Visual examinations were performed in duplicate and at a one-week interval by three different calibrated examiners. The analysis of digital images by ICDAS criteria was also performed in duplicate, 1 month after visual examinations. The detection methods were compared by means of sensitivity, specificity, area under the curve, predictive positive and negative values, and accuracy for two different thresholds (1- sound vs. carious teeth; 2- tooth requiring operative vs. non-operative treatment). Sensitivity and accuracy values for threshold 1 in the visual ICDAS and image-based ICDAS methods were high for sensitivity (0.93 and 0.97) and for accuracy (0.83 and 0.85), but low for specificity (0.55 for both methods). Specificity values for threshold 2 were 0.77 and 0.82, while sensitivity was 0.33 and 0.28 for each method. Spearman's rank correlation coefficient was 0.53 and 0.43 (p<0.05) for visual and image-based ICDAS compared to the gold standard scores. Both visual and image-based ICDAS scores were similar to each other in terms of diagnostic accuracy when compared to the micro-CT gold standard. Low specificity for the presence of caries and sensitivity for the detection of caries requiring operative treatment were found.