Synthesis and characterization of Gellan gum-based hydrogels for the delivery of anticancer drug etoposide.

Present research work reports the synthesis of Gellan gum (Gg) and methacrylic acid (MA) based grafted hydrogels (Gg-cl-poly(MA)) crosslinked using N, N'- methylene-bis-acrylamide (MBA) and the evaluation of their efficiency to be used as a sustained drug delivery carrier for anticancer drug i.e., etoposide. Various characterization techniques like Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) confirmed the grafting of Gg with MA and the formation of crosslinked Gg-cl-poly(MA) hydrogel polymer. The synthesized hydrogel showed pH-dependent swelling properties and exhibited a maximum swelling capacity of 867 % under optimized environmental conditions. The Gg-cl-poly(MA) was biocompatible and non-cytotoxic, which was confirmed by the hemolytic and cytotoxic tests. The release dynamics of etoposide from the Gg-cl-poly(MA) polymer matrix was checked under specific physiological conditions. Drug release was found to be significantly higher in the acidic medium, followed by the neutral and alkaline medium. This clearly indicated that etoposide drug release through synthesized hydrogel was stomach-specific and it is effective for the treatment of stomach cancer. The release mechanism of the etoposide drug was a Fickian-type diffusion mechanism in the acidic medium and a non-Fickian-type diffusion mechanism in the neutral and alkaline medium. The release profile of the etoposide was best fitted to the first-order rate model. The results showed that the synthesized hydrogel (i.e., Gg-cl-poly(MA)) was biocompatible, non-toxic, and could be used for the treatment of stomach cancer.

Combined Theoretical and Experimental Investigations: Design, Synthesis, Characterization, and In Vitro Cytotoxic Activity Assessment of a Complex of a Novel Ureacellobiose Drug Carrier with the Anticancer Drug Carmustine.

Drug delivery systems (DDSs) are used to transport drugs which are characterized by some pharmaceutical problems to the specific target site, enhancing therapeutic efficacy and reducing off-target accumulation in the body. In this work, one of the recently synthesized molecules, 1,10-N,N'-bis-(ß-ᴅ-ureidocellobiosyl)-4,7,13,16-tetraoxa-1,10-diazacyclooctadecane (TN), was tested as a potential drug carrier towards the anticancer drug carmustine. For this purpose, different techniques were used, from synthesis and calculations to cytotoxicity assessment. Our results showed that TN is characterized by a very compact geometry, which significantly impacts its complexation properties. Although it forms a very stable complex with carmustine, it adopts a non-inclusion geometry, as verified by both experimental and theoretical NMR analyses. The cytotoxicity study performed for all analyzed molecules (TN; carmustine; TN:carmustine complex) towards normal and cancer (breast and colon) cells revealed that TN is not toxic and that the formation of complexes with carmustine reduces the toxicity of carmustine to normal cells.

pH-responsive chitosan copolymer synthesized via click chemistry for design of polymeric nanoparticles for targeted drug delivery.

The polymeric nanoparticles (PNPs) loaded with prednisolone were developed to exhibit pH-responsive properties owing to the attachment of a hydrazone linkage between the copolymer chitosan and mPEG. In the diseased cellular environment, the hydrazone bond tends to break due to reduced pH, leading to the release of the drug from the PNPs at the required site of action. The fabricated PNPs exhibit spherical morphology, optimum size (∼200 nm), negative surface charge, and monodispersed particle size distribution. The encapsulation efficiency of the PNPs was determined to be 71.1 ± 0.79 % and two experiments (polymer weight loss and drug release) confirmed the pH-responsive properties of the PNPs. The cellular study cytotoxicity assay showed biocompatibility of PNPs and drug molecule-mediated toxicity to A549 cells. The ligand atrial natriuretic peptide-attached PNPs internalized into A549 cells via natriuretic peptide receptor-A to achieve target specificity. The PNPs cytotoxicity and pH-response medicated inflammation reduction functionality was studied in inflammation-induced RAW264.7 cell lines. The study observed the PNPs effectively reduced the inflammatory mediators NO and ROS levels in RAW264.7. The results showed that pH-responsive properties of PNPs and this novel fabricated delivery system effectively treat inflammatory and cancer diseases.

Synthesis and characterisation of antimicrobial metal-organic frameworks as multi-drug carriers.

Antibiotic resistance is a significant global concern, necessitating the development of either new antibiotics or advanced delivery methods. With this in mind, we report on the synthesis and characterisation of a new family of Metal-Organic Frameworks (MOFs), OnG6 MOFs, designed to act as multi-drug carriers for bacterial infection treatment. OnG6 is based on the pro-drug 4,4'-azodisalicylic acid (AZDH4), which in vivo produces two equivalents of para-aminosalicylic acid (ASA), a crucial drug for M. tuberculosis treatment. X-ray and computational studies revealed that OnG6 MOFs are mesoporous MOFs with etb topology and an [M2(AZD)] formula (M = Zn, OnG6-Zn; Mg, OnG6-Mg; Cu, OnG6-Cu; and Co, OnG6-Co), featuring 1-dimensional channel type pores of 25 Å diameter. OnG6 MOFs are the first reported MOFs bearing the ligand AZDH4, joining the family of mesoporous MOFs arranged in a honeycomb pattern. They absorb isoniazid (INH) and ciprofloxacin (CIPRO) with the former being a specific antibiotic for M. tuberculosis, and the latter being a broader-spectrum antibiotic. The stability of the MOFs and their capacity for antibiotic uptake depend on the nature of the metal ion, with OnG6-Mg demonstrating the highest drug absorption. The antimicrobial activity of these species was assessed against S. aureus and E. coli, revealing that the carriers containing CIPRO displayed optimal efficacy.

Facile scalable one-flow synthesis of ionizable cationic lipid library as precursors of nanoparticle carriers.

A variety of ionizable and cationic lipids have been synthesized as precursors for nanoparticle carriers. However, the laborious synthetic routes in batch reactors often involve the use of toxic and carcinogenic agents, as well as challenge of removing gaseous byproducts. In this study, we present facile one-flow micro-reaction process that enables the synthesis of 11 ionizable lipids as well as 7 cationic lipids, including the well-known DODAP and DOTAP. These lipids can be scaled up to produce approximately ∼10g/h by using a straightforward size-up approach. The development of the lipid library was involved generating highly moisture-sensitive acyl chloride at 25 °C for 1.5 min. The toxic byproducts such as HCl, CO2 and CO were subsequently removed using a liquid-gas separator. The esterification with dimethylamino-1,2-diol at 25 °C for 3 min, monitored in-line with FTIR, completed the process. Additionally, the synthesized ionizable lipids were converted to cationic lipids with methyl sulfate, chloride ions via dimethyl sulfate and Steglich esterification in a continuous flow system. Finally, the produced DODAP was transformed into a uniform-sized LNPs (64 nm, PDI 0.07) and liposomal nanoparticles (72 nm, PDI 0.05) while DOTAP was converted to liposomes (55 nm, PDI 0.08) using a custom micro-mixer. This efficient platform for lipid synthesis significantly contributes to the practical applications of lipid-based nanomedicines.

Enhanced assembly stability for amine-based cationic glycolipid.

Glycolipids incorporating positive charges, mediated by an imidazolium cation, have shown potential for effective formulation of vesicular drug carriers, reflecting repulsive electrostatic forces, promoting the formation of nanosized assemblies and preventing unwanted Oswald ripening (Goh et al. (2019), ACS Omega 4, 17,039). Our continuous development of an assembly-based drug delivery system prompted us to investigate a pH-sensitive analogue, leading to the synthesis of a 6-amino-Guerbet glycoside. However, in contrast to the imidazolium counterpart, the amine-mediated charge increased the intermolecular cohesions, furnishing bigger assemblies instead, which further increased upon introduction of acid. Moreover, assemblies exhibited a significantly reduced positive charge density. It is concluded that strong proton-initiated hydrogen bonding between amino groups provide cohesive head group interactions overcompensating possible repulsive charge interactions. While this behavior invalidates the application of the amino-glucoside as dispersing agent for the formulation of small vesicles, it potentially paves a route towards enhanced vesicle stability.

Synthesis and Characterization of Guanidinylated CO-Releasing Micelles Based on Biodegradable Polycarbonate.

As one of the gaseous signals in living cells, carbon monoxide (CO) not only participates in many biological activities but also serves as a therapeutic agent for the treatment of diseases. However, the limited applicability of CO in gas therapy emerges from the inconvenience of direct administration of CO. Here we reported the construction of guanidinylated CO-releasing micelles, which are composed of poly(trimethylene carbonate) (PTMC)-based CO donors. The in vitro studies demonstrated that micelles in the presence of light irradiation can induce cancer death, whereas no obvious toxicity to normal cells was observed. Moreover, the functionalization of guanidine groups imparts improved cellular uptake efficiency to micelles owing to the specific interactions with the surface of cells, which synergistically increase the anticancer capacity of the system. The guanidine-functionalized CO-releasing micelles provide a new strategy for the construction of CO-releasing nanocarriers, which are expected to find applications in gas therapeutics.

New Conjugates of Hyaluronic Acid with γ-Cyclodextrin as Sorafenib Carrier in Cancer Cells.

In recent years, nanoparticles based on cyclodextrins have been widely investigated, mainly for drug delivery. In this work, we synthesized nanoparticles with a hyaluronic acid backbone (11 kDa and 45 kDa) functionalized with γ-cyclodextrins. We tested sorafenib in the presence of the new hyaluronan-cyclodextrin conjugates in A2780 (ovarian cancer), SK-HeP-1 (adenocarcinoma) and MDA-MB-453 (breast cancer) cell lines. We found that hyaluronan-cyclodextrin conjugates improve the antiproliferative activity of sorafenib. Remarkably, the system based on the 11 kDa hyaluronan conjugate was the most effective and, in the MDA-MB-453 cell line, significantly reduced the IC50 value of sorafenib cells by about 75 %.

Synthesis and Characterization of SiO2/nGO/Fe3O4/SeQDs Nanoparticles as Potential Nanocarriers in Drug Delivery Systems.

Herein, we constructed the branch-shaped SiO2/nano GO (nGO)/Fe3O4/selenium quantum dots (QDs) (SeQDs) nanoparticles (SGF/SeQDs) embodying magnetism, fluorescence, and microwave stimulus response properties to enhance the performance of releasing drugs. The SGF/SeQDs composite was characterized by technologies including powder X-ray diffraction, transmission electron microscopy, infrared spectroscopy, etc. In the nanoparticles, the branch-shaped SiO2 provides a large specific surface area, nGO as the dielectric loss-style material promotes microwave-absorbing performance, and the Fe3O4 serves as a magnetic targeting agent and microwave absorber. Integrating nGO and Fe3O4 could further strengthen the microwave absorption of the entire composite; selenium features both fluorescence and anticancer effects. The synthesized nanoparticles as carriers exhibited a branch-like mesoporous sphere of ∼260 nm, a specific surface area of 258.57 m2 g-1, a saturation magnetization of 24.59 emu g-1, and good microwave thermal conversion performance that the temperature was elevated from 25 to 70 °C under microwave irradiation. These physical characteristics, including large pore volume (5.30 nm), high specific surface area, and fibrous morphology, are in favor of loading drugs. Meanwhile, the cumulative etoposide (VP16) loading rate of the nanoparticles reached to 21 wt % after 360 min. The noncovalent interaction between the VP16 and SGF/SeQDs was mainly the hydrogen-bonding effect during the loading process. Furthermore, the drug release rates at 180 min were up to 81.46, 61.92, and 56.84 wt % at pH 4, 5, and 7, respectively. At 25, 37, and 50 °C, the rates of drug release reach 25.40, 56.84, and 65.32 wt %, respectively. After microwave stimulation at pH 7, the rate of releasing drug increased distinctly from 56.84 to 71.74 wt % compared to that of nonmicrowave irradiation. Cytotoxicity tests manifested that the carrier had good biocompatibility. Therefore, the nanoparticles are looking forward to paving one platform for further applications in biomedicine and drug delivery systems.

Dextran-based nanoparticles with 5-FU-conjugated polymethacrylate segments for drug delivery: Synthesis of amphiphilic graft copolymers by mechanochemical solid-state polymerization and characterization.

Dextran (Dx) is a biodegradable and biocompatible polysaccharide, thus promising as a drug delivery carrier for tumor therapy. Herein, we applied mechanical energy to a high molecular weight Dx to control its molecular weight and simultaneously generate mechanoradicals. The solid-state polymerization of methacrylate- or methacrylamide derivatives initiated with Dx mechanoradicals showed polymer conversion of >95%, yielding Dx-based graft copolymers with molecular weights of approximately 30,000 g mol-1. The Dx-based graft copolymers with hydrophobic segments formed nanoparticles with a particle size of 25-35 nm in an aqueous solution. The anti-pancreatic tumor drug 5-fluorouracil (5-FU) was covalently conjugated onto the hydrophobic segments of the amphiphilic Dx, and the nanoparticles were also prepared. The drug release profile from 5-FU-conjugated nanoparticles corresponded well to the Korsmeyer-Peppas model applied to drug release from matrix substrates, and was also immensely predicted by the Logistic and Gompertz curves. The 5-FU-conjugated nanoparticles showed cytotoxicity against the pancreatic adenocarcinoma cell lines (BxPC-3) that were not significantly inferior to the 5-FU positive group. Furthermore, the fluorescein-labeled nanoparticles internalized into BxPC-3 within 6 h and actively migrated into the cytosol. These results suggest that Dx-based graft copolymers with hydrophobic segments might be used to enhance therapeutic activity.

Synthesis and characterization of a pH/temperature-dual responsive hydrogel with promising biocompatibility features for stimuli-responsive 5-FU delivery.

The tunable properties of stimuli-responsive copolymers or hydrogels enable their application in different fields such as biomedical engineering, tissue engineering, or even drug release. Here we introduce a new PNIPAM-based triblock copolymer material comprising a controlled amount of a novel hydrophobic crosslinker 2,4'-diacryloyloxy benzophenone (DABP) and acrylic acid (AAc) to achieve lower critical solution temperature (LCST) between ambient and body temperatures. The dual stimuli-responsive p(NIPAM-co-DABP-co-AAc) triblock copolymer material and hydrogel were synthesized, and their temperature and pH-responsive behaviors were systematically investigated. The hydrogel exhibited excellent temperature and pH-responsive properties with an LCST of around 30 °C. Moreover, the synthesized copolymer has been demonstrated to be nontoxic both in vitro and in vivo. When the hydrogel was preloaded with the model drug 5-fluorouracil (5-FU), the designed hydrogel released the drug in a temperature and pH-controlled fashion. It was observed that the prepared hydrogel has the ability to entrap 5-FU, and the loading is more than 85%. In the case of temperature-controlled release, we observed almost complete release of 5-FU at lower temperatures and sustained release behavior at higher temperatures. In addition, the hydrogel matrix was able to retard the release of 5-FU in an acidic environment and selectively release 5-FU in a basic environment. By realizing how the hydrogel properties influence the release of drugs from preloaded hydrogels, it is possible to design new materials with myriad applications in the drug delivery field.

One-step synthesis of amphiphilic copolymers PDMS-b-PEG using tris(pentafluorophenyl)borane and subsequent study of encapsulation and release of curcumin.

A series of amphiphilic block copolymer (BCP) micelles based on poly(dimethylsiloxane) (PDMS) and poly(ethylene glycol) (PEG) were synthesized by a one-step reaction in the presence of tris(pentafluorophenyl)borane (BCF) as a catalyst. The structural composition of PDMS-b-PEG (PR11) and PEG-b-PDMS-b-PEG (PR12) was corroborated by FTIR, 29Si NMR, and TGA. The BCPs were assembled in an aqueous solution, obtaining micelles between 57 and 87 nm in size. PR11 exhibited a higher (2.0 g L-1) critical micelle concentration (CMC) than PR12 (1.5 g L-1) due to the short chain length. The synthesized nano micelles were used to encapsulate curcumin, which is one of three compounds of turmeric plant 'Curcuma longa' with significant biological activities, including antioxidant, chemoprotective, antibacterial, anti-inflammatory, antiviral, and anti-depressant properties. The encapsulation efficiency of curcumin was 60% for PR11 and 45% for PR12. Regarding the release study, PR11 delivered 53% curcumin after five days under acidic conditions (pH of 1.2) compared to 43% at a pH of 7.4. The degradation products of curcumin were observed under basic conditions and were more stable at acidic pH. In both situations, the release process is carried out by breaking the silyl-ether bond, allowing the release of curcumin. PR11 showed prolonged release times, so it could be used to reduce ingestion times and simultaneously work as a nanocarrier for other hydrophobic drugs.

Matrix Metalloproteinase- and pH-Sensitive Nanoparticle System Enhances Drug Retention and Penetration in Glioblastoma.

Glioblastoma (GBM) is a primary malignant brain tumor with limited therapeutic options. One promising approach is local drug delivery, but the efficacy is hindered by limited diffusion and retention. To address this, we synthesized and developed a dual-sensitive nanoparticle (Dual-NP) system, formed between a dendrimer and dextran NPs, bound by a dual-sensitive [matrix metalloproteinase (MMP) and pH] linker designed to disassemble rapidly in the tumor microenvironment. The disassembly prompts the in situ formation of nanogels via a Schiff base reaction, prolonging Dual-NP retention and releasing small doxorubicin (Dox)-conjugated dendrimer NPs over time. The Dual-NPs were able to penetrate deep into 3D spheroid models and detected at the tumor site up to 6 days after a single intratumoral injection in an orthotopic mouse model of GBM. The prolonged presence of Dual-NPs in the tumor tissue resulted in a significant delay in tumor growth and an overall increase in survival compared to untreated or Dox-conjugated dendrimer NPs alone. This Dual-NP system has the potential to deliver a range of therapeutics for efficiently treating GBM and other solid tumors.

Preparation of a Novel Multifunctional Cationic Liposome Drug-carrying System and its Functional Study on Lung Cancer.

BACKGROUND: Low-dose chemotherapy is a promising treatment strategy that may be improved by controlled delivery. OBJECTIVE: This study aimed to design polyethylene glycol-stabilized bilayer-decorated magnetic Cationic Liposomes (CLs) as a drug delivery system for integrated functional studies of lung cancer cell therapy and imaging. METHODS: A novel multifunctional folic acid targeting magnetic CLs docetaxel drug-loading system (FA-CLs-Fe- DOC) was prepared and tested for its physical properties, encapsulation rate and drug release performance. The feasibility of FA-CLs-Fe-DOC ability to inhibit tumor cells and act as an MRI contrast agent was investigated in vitro, and the target recognition and therapeutic ability of FA-CLs-Fe-DOC was studied in vivo. RESULTS: FA-CLs-Fe-DOC had a particle size of 221.54 ± 6.42 nm and a potential of 28.64 ± 3.56 mv, with superparamagnetic properties and better stability. The encapsulation rate was 95.36 ± 1.63%, and the drug loading capacity was 9.52 ± 0.22%, which possessed the drug slow-release performance and low cytotoxicity and could effectively inhibit the proliferation of lung cancer cells, promoting apoptosis of lung cancer cells. MRI showed that it had the function of tracking and localization of lung cancer cells. In vivo experiments confirmed the targeted recognition property and therapeutic function of lung cancer cells. CONCLUSION: In this study, we successfully prepared an FA-CLs-Fe-DOC capable of specifically targeting lung cancer cells with integrated functions of efficient lung cancer cell killing and imaging localization. This targeted drug packaging technology may provide a new strategy for the design of integrated carriers for targeted cancer therapy and imaging.

Synthesis of calix (4) resorcinarene based amphiphilic macrocycle as an efficient nanocarrier for Amphotericin-B to enhance its oral bioavailability.

The supramolecular-based macrocyclic amphiphiles have fascinating attention and find extensive utilization in the pharmaceutical industry for efficient drug delivery. In this study, we designed and synthesized a new supramolecular amphiphilic macrocycle to serve as an efficient nanocarrier, achieved by treating 4-hydroxybenzaldehyde with 1-bromotetradecane. The derivatized product was subsequently treated with resorcinol to cyclize, resulting in the formation of a calix(4)-resorcinarene-based supramolecular amphiphilic macrocycle. The synthesized macrocycle and intermediate products were characterized using mass spectrometry, IR, and 1H NMR spectroscopic techniques. The amphotericin-B (Amph-B)-loaded and unloaded amphiphiles were screened for biocompatibility studies, vesicle formation, particle shape, size, surface charge, drug entrapment, in-vitro release profile, and stability through atomic force microscopy (AFM), Zetasizer, HPLC, and FT-IR. Amph-B -loaded macrocycle-based niosomal vesicles were investigated for in-vivo bioavailability in rabbits. The synthesized macrocycle exhibited no cytotoxicity against normal mouse fibroblast cells and was found to be hemocompatible and safe in mice following an acute toxicity study. The drug-loaded macrocycle-based vesicles appeared spherical, nano-sized, and homogeneous in size, with a notable negative surface charge. The vesicles remained stable after 30 days of storage. The results of Amph-B oral bioavailability and pharmacokinetics revealed that the newly tailored niosomal formulation enhanced drug solubility, protected drug degradation at gastric pH, facilitated sustained drug release at the specific target site, and delayed plasma drug clearance. Incorporating such advanced niosomal formulations in the field of drug delivery systems has the potential to revolutionize therapeutic outcomes and improve the quality of patient well-being.

Zinc-Substituted Hemoglobin-Albumin Cluster as a Porphyrin-Carrier for Enhanced Photodynamic Therapy.

Apohemoprotein is focused on the field of theranostics, serving as a porphyrin carrier. Hemoglobin (Hb) consists of α2ß2 tetramer with iron(II)-protoporphyrin IX (heme) bound to each globin. However, heme-removed Hb (apoHb) causes dissociation at αß interfaces and aggregation under physiological conditions. We synthesized a stable apoHb derivative comprising intramolecular-crosslinked apoHb (apoXHb) and human serum albumin (HSA), apoXHb-HSA3. ApoXHb-HSA3 engendered no aggregates in the physiological solutions. Moreover, apoXHb-HSA3 was reconstituted with zinc(II)-protoporphyrin IX (ZnP), generating ZnXHb-HSA3, a potent photosensitizer for photodynamic therapy (PDT). The photophysical properties of ZnXHb-HSA3 were identical to those of zinc-substituted XHb (ZnXHb). Cellular uptake behavior was evaluated using various cancer cell lines. ZnXHb-HSA3 released ZnP around the cells, and the free ZnP penetrated cell membranes. In contrast, protein units were not observed within the cells. ZnXHb-HSA3 showed no cytotoxicity under dark conditions and demonstrated superior PDT activity in comparison to naked ZnXHb. ZnXHb-HSA3 acts as an innovative porphyrin carrier for enhanced PDT.

PTSA-induced synthesis, in silico and nano study of novel ethylquinolin-thiazolo-triazole in cervical cancer.

Aim: p-Toluenesulfonic acid-(PTSA) and grinding-induced novel synthesis of ethylquinolin-thiazolo-triazole derivatives was performed using green chemistry. Materials & methods: Development of a nanoconjugate drug-delivery system of ethylquinolin-thiazolo-triazole was carried out with D-α-tocopheryl polyethylene glycol succinate (TPGS) and the formulation was further characterized by transmission electron microscopy, atomic force microscopy, dynamic light scattering and in vitro drug release assay. The effect of 3a nanoparticles was assessed against a cervical cancer cell line (HeLa) through the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and the effect on apoptosis was determined. Results & discussion: The 3a nanoparticles triggered the apoptotic mode of cell death after increasing the intracellular reactive oxygen level by enhancing cellular uptake of micelles. Furthermore, in silico studies revealed higher absorption, distribution, metabolism, elimination and toxicity properties and bioavailability of the enzyme tyrosine protein kinase. Conclusion: The 3a nanoparticles enhanced the therapeutic potential and have higher potential for targeted drug delivery against cervical cancer.

[Box: see text].

pH-Sensitive Amphiphilic Diblock Polyphosphoesters with Lactate Units: Synthesis and Application as Drug Carriers.

pH-sensitive amphiphilic diblock polyphosphoesters containing lactic acid units were synthesized by multistep one-pot polycondensation reactions. They comprise acid-labile P(O)-O-C and C(O)-O-C bonds, the cleavage of which depends on the pH of the medium. The structure of these copolymers was characterized by 1H, 13C {H}, 31P NMR, and size exclusion chromatography (SEC). The newly synthesized polymers self-assembled into the micellar structure in an aqueous solution. The effects of the molecular weight of the copolymer and the length of the hydrophobic chain on micelle formation and stabilityand micelle size were studied via dynamic light scattering (DLS). Drug loading and encapsulation efficiency tests using doxorubicin revealed that hydrophobic drugs can be delivered by copolymers. It was established that the molecular weight of the copolymer, length of the hydrophobic chain and content of lactate units affects the size of the micelles, drug loading, and efficiency of encapsulation. A copolymer with 10.7% lactate content has drug loading (3.2 ± 0.3) and efficiency of encapsulation (57.4 ± 3.2), compared to the same copolymer with 41.8% lactate content (1.63%) and (45.8%), respectively. It was demonstrated that the poly[alkylpoly(ethylene glycol) phosphate-b-alkylpoly(ethylene glycol)lactate phosphate] DOX system has a pH-sensitive response capability in the result in which DOX was selectively accumulated into the tumor, where pH is acidic. The results obtained indicate that amphiphilic diblock polyphosphoesters have potential as drug carriers.

Synthesis of poly(ionic liquid-OH) mediated deacetylated chitin and its hydrogels: A study on their applications in controlled release of paracetamol and urea.

Due to the biodegradable and biocompatible nature of chitin and chitosan, they are extensively used in the synthesis of hydrogels for various applications. In this work, deacetylation of chitin is carried out with alkaline poly(dimethyldiallylammonium-hydroxide) that gave a higher amount of water-soluble chitin (with 84 % of the degree of deacetylation = chitosan0.84) compared to deacetylation using NaOH. The water-soluble chitosan0.84 is used as intercalating chains for the preparation of acrylic acid and vinylimidazole-based hydrogels. The quaternization of imidazole groups is done with 1,ω-dibromoalkanes, which sets off the crosslinking in the above polymer network. A set of three chitosan0.84 intercalated hydrogels, namely Cs-C4-hydrogel, Cs-C5-hydrogel, and Cs-C10-hydrogel are prepared bearing butyl, pentyl, and decyl chains as respective crosslinkers. The swell ratios of these intercalated hydrogels are compared with those of non-intercalated hydrogels (C4-hydrogel, C5-hydrogel, and C10-hydrogel). Chitosan0.84 intercalated Cs-C10-hydrogel has excellent swelling properties (2330 % swelling ratio) among six synthesized hydrogels. SEM analysis reveals that decyl crosslinker-bearing hydrogels are highly porous. The multi-functionality of Cs-C10-hydrogel and C10-hydrogel is explored towards -the controlled release of paracetamol/urea, and methyleneblue dye absorption. These studies disclose that chitosan0.84 intercalated hydrogels are showing superior-swelling behavior, high paracetamol/urea loading capacities and better dye entrapment than their non-intercalated counterparts.

Research progresses on carboxymethyl xanthan gum: Review of synthesis, physicochemical properties, rheological characterization and applications in drug delivery.

Xanthan gum is a nonionic polysaccharide widely explored in biomedical, nutraceutical, and pharmaceutical fields. XG suffers from several drawbacks like poor dissolution, lower bioavailability and an inability to form hydrogels. The carboxymethyl derivative of XG, CMX, has better solubility, dissolution, and bioavailability characteristics. Moreover, due to its anionic character, it forms water insoluble hydrogels upon crosslinking with metal cations. CMX hydrogels are used to prepare matrix tablets, microparticles, beads, and films. CMX hydrogels has been used in drug delivery and tissue engineering fields. CMX hydrogels are used for sustained gastrointestinal, colon targeted, and transdermal delivery of drugs. CMX nanoparticles have been used for targeted delivery of anticancer drugs to tumor cells. CMX hydrogels have already made significant strides in drug delivery and tissue engineering fields. Further understanding of the physicochemical properties and rheological characteristics of CMX would enable researchers to explore newer applications of CMX. This review article thus aims to discuss the synthesis, physicochemical properties, and rheological characteristics of CMX. The article also gives critical insights on the versatility of CMX as a drug delivery carrier and presents prospective trends on applications of CMX.