Ebeam Technology - Transfer Technology for Pre-Sterilized RTU Components.

With increased demand on sealed packed, pre-sterilized ready-to-use (RTU) components like Syringes & Vials, the ebeam technology is used as transfer technology with surface decontamination for transfer of the RTU in a GRADE A environment like an Isolator.

Prefilled Ophthalmic syringes - New Possibilities in Terminal Sterilization.

In a joint study carried out by Gerresheimer, Sterigenics and Früh, it could be shown that also NO2 is well suited to terminally sterilize prefilled ophthalmic syringes. In detail 5 topics were addressed: (1) Compare EtO vs. NO2 penetration into the filled syringe; (2) Analyze gas ingress though 4 different plunger stoppers including silicone oil free and standard rubber plungers; (3) Scrutinize gas ingress through 2 different cap designs based on different elastomer properties; (4) Investigate gas permeation through COP plastic barrels compared to glass; (5) Check if the Tyvek®-layer has an influence on either sterilization.Depending on the needs a suitable sterilization method, packaging and syringe type can be suggested to customers.

Real-time visual intelligence for defect detection in pharmaceutical packaging.

Defect detection in pharmaceutical blister packages is the most challenging task to get an accurate result in detecting defects that arise in tablets while manufacturing. Conventional defect detection methods include human intervention to check the quality of tablets within the blister packages, which is inefficient, time-consuming, and increases labor costs. To mitigate this issue, the YOLO family is primarily used in many industries for real-time defect detection in continuous production. To enhance the feature extraction capability and reduce the computational overhead in a real-time environment, the CBS-YOLOv8 is proposed by enhancing the YOLOv8 model. In the proposed CBS-YOLOv8, coordinate attention is introduced to improve the feature extraction capability by capturing the spatial and cross-channel information and also maintaining the long-range dependencies. The BiFPN (weighted bi-directional feature pyramid network) is also introduced in YOLOv8 to enhance the feature fusion at each convolution layer to avoid more precise information loss. The model's efficiency is enhanced through the implementation of SimSPPF (simple spatial pyramid pooling fast), which reduces computational demands and model complexity, resulting in improved speed. A custom dataset containing defective tablet images is used to train the proposed model. The performance of the CBS-YOLOv8 model is then evaluated by comparing it with various other models. Experimental results on the custom dataset reveal that the CBS-YOLOv8 model achieves a mAP of 97.4% and an inference speed of 79.25 FPS, outperforming other models. The proposed model is also evaluated on SESOVERA-ST saline bottle fill level monitoring dataset achieved the mAP50 of 99.3%. This demonstrates that CBS-YOLOv8 provides an optimized inspection process, enabling prompt detection and correction of defects, thus bolstering quality assurance practices in manufacturing settings.

Modeling moisture change of packaged dry tablet dosage forms under consumer use condition.

A simple mathematical model based on product's moisture sorption isotherm and package's moisture transmission was developed to predict moisture content of dry solid tablets during consumers' use, which is useful for determination of in-use shelf life (ISL) or secondary shelf life. The moisture increase depending on amount of product remaining in the package was accounted for in the mass balance equation on the package. The model was first verified by literature data of desiccant canisters in a plastic bottle of high density polyethylene exposed to two environmental conditions (25 °C and 60% relative humidity (RH); 40 °C and 75% RH) simulating in-use of removing one canister each day. Then an experimental work was conducted on dry refresher candies in a polyethylene terephthalate bottle at 25 °C with two tablets taken out every day, which confirmed the model's capability to predict the product moisture content during in-use storage of 76% and 90% RH. Its use can provide science-based accurate determination of ISL, which may work as consumer guideline. The model is also expected to be helpful for recommending management scheme of whole product life.

Non-Destructive Analysis of Subvisible Particles with Mie-Scattering-Based Light Sheet Technology: System Development.

The characteristics of subvisible particles (SbVPs) are critical quality attributes of injectable and ophthalmic solutions in pharmaceutical manufacturing. However, current compendial SbVP testing methods, namely the light obstruction method and the microscopic particle count method, are destructive and wasteful of target samples. In this study, we present the development of a non-destructive SbVP analyzer aiming to analyze SbVPs directly in drug product (DP) containers while keeping the samples intact. Custom sample housings are developed and incorporated into the analyzer to reduce optical aberrations introduced by the curvature of typical pharmaceutical DP sample containers. The analyzer integrates a light-sheet microscope structure and models the side scattering event from a particle with Mie scattering theory with refractive indices as prior information. Equivalent spherical particle size under assigned refractive index values is estimated, and the particle concentration is determined based on the number of scattering events and the volume sampled by the light sheet. The resulting analyzer's capability and performance to non-destructively analyze SbVPs in DP containers were evaluated using a series of polystyrene bead suspensions in ISO 2R and 6R vials. Our results and analysis show the particle analyzer is capable of directly detecting SbVPs from intact DP containers, sorting SbVPs into commonly used size bins (e.g. ≥ 2 µm, ≥ 5 µm, ≥ 10 µm, and ≥ 25 µm), and reliably quantifying SbVPs in the concentration range of 4.6e2 to 5.0e5 particle/mL with a margin of ± 15 % error based on a 90 % confidence interval.

Mechanical Characterization of Vial Strain During Freezing and Thawing Operations Using Amorphous Excipients.

The purpose of this study was to investigate the mechanical stresses and strains acting on pharmaceutical glass tubing vials during freezing and thawing of model pharmaceutical formulations. Strain measurements were conducted inside of a laboratory-scale freeze-dryer using a custom wireless sensor. In both sucrose and trehalose formulations at concentrations between 5 % and 20 % w/v, the strain measurements initially increased before peaking in magnitude at temperatures close to the respective glass transition temperatures of the maximally freeze concentrated solutes, Tg'. We attribute this behavior to a shift in the mechanical properties of the frozen system from a purely elastic glass below Tg' to a viscoelastic rubber-like material above Tg'. That is, when the interstitial region becomes mechanically compliant at temperature above Tg'. The outputs were less predictable below 5 % w/v and tended to exhibit two separate peaks in strain output, one near the equilibrium melting temperature of pure ice and the other near Tg'. The peaks merged at concentrations between 4 and 5 % w/v where the largest strain magnitude was observed. The strain on primary packaging has traditionally been applied to evaluate the risk of damage or breakage due to, for example, crystallization of excipients. However, data collected during this study suggest there may be utility in formulation design or as a process analytical technology to minimize potentially destabilizing stresses and strains in the frozen formulation.

Examination of Particulate Contamination in Parenteral Injections and Infusions Following Fluid Withdrawal Utilizing Conventional Needles and Filter Needles: Assessment of Compliance and Comparative Analysis.

Particulate contamination, the unintentional presence of particles in parenteral fluids, is associated with potential risks such as phlebitis and thrombophlebitis. Recent guidelines recommend the use of filter needles when withdrawing parenteral fluid from vials with a rubber stopper. However, the literature is limited and lacks clarity regarding the advantages of filter needles over conventional needles. The aim of this study was to assess the compliance of parenteral fluids regarding particulate contamination after withdrawing fluid using both conventional needles and filter needles, following the guidelines of European Pharmacopoeia (Ph. Eur.) and United States Pharmacopoeia (USP). Visible particles were counted through visual inspection and sub-visible particles were quantified utilizing the light obscuration particle count test. Particle counts for both types of needles were compared to Ph. Eur. and USP standards and differences in particle contamination were assessed using a Mann-Whitney U test. Both types of needles demonstrated compliance with Ph. Eur. and USP standards regarding particulate contamination of visible and sub-visible particles. However, filter needles exhibited a significantly higher particle count for particles with a size of ≥25 µm compared to conventional needles (p = 0.0029). In conclusion, both types of needles demonstrate suitability for aspirating fluid from vials featuring rubber stoppers regarding particulate contamination. Nevertheless, non-filter needles are preferred for withdrawing fluid from vials with a rubber stopper over filter needles due to their lower cost.

Homogeneous Heat Transfer During Freeze-Drying Using Cyclic Olefin Polymer Vials.

In pharmaceutical freeze-drying processes, batch homogeneity is an important quality attribute. In this context, the edge-vial-effect is a challenging phenomenon. Shortly, this effect describes that vials at the edges of the shelf dry faster and at a higher temperature compared to vials in the middle of the shelf. Studies by Ehlers et al. revealed that this effect mainly origins from the number of neighbor vials cooling each other, which is reduced for vials in corners and edges compared to vials in the middle. Due to the reduced heat transfer in cyclic olefin polymer (COP) vials, the adverse edge-vial-effect should be greatly reduced allowing a better batch uniformity. In this focused study, glass and COP vials are compared regarding this effect on a fully loaded shelf. A reference experiment with vials placed at distance using a specially designed frame is presented as well.

Accelerated Predictive Stability Study of a Pediatric Drug Product for a Supplemental New Drug Application.

In this paper, we report two Accelerated Stability Assessment Program (ASAP) studies for a pediatric drug product. Whereas the first study using a generic design failed to establish a predictive model, the second one was successful after troubleshooting the first study and customizing the study conditions. This work highlighted important lessons learned from designing an ASAP study for formulations containing excipients that could undergo phase change at high humidity levels. The stability predictions by the second ASAP model were consistent with available long-term stability data of the drug product under various storage conditions in two different packaging configurations. The ASAP model was part of the justifications accepted by the health authority to submit a stability package with reduced long-term stability data from the primary stability batches for a Supplemental New Drug Application (sNDA).

Development of an organic polymer monolith column for the nano liquid chromatography fast analysis of monoclonal antibody in infusion bags prepared in a hospital pharmacy.

Poly(butyl methacrylate-co-ethylene dimethacrylate) monolith was in situ prepared in a liquid chromatography capillary column with a 75 µm internal diameter. This monolith offered high permeability (5.3 ± 10-14 m2) and good peak capacity (140 for a 15 cm column length at 300 nl/min with a 20 min gradient time). This is exemplified by its separation ability in reversed mode for subunit analysis of monoclonal antibodies after IdeS digestion (middle-up analysis). The potential of this column was also illustrated for the fast analytical control of therapeutic monoclonal antibodies in standardized infusion bags prepared in advance in a pharmacy department. Linearity analysis revealed the column's capability for accurate quantification analysis of the different dose bandings (in mg) of monoclonal antibodies in <2 min. In addition, lifetime analysis data indicated that the column can be highly reproducible and has a long lifetime with stable and low back pressure. The variations observed on the peak shape and area between unstressed (intact) and stressed monoclonal antibodies indicated that our nano liquid chromatographic method was stability indicating. In addition, using a gradient elution mode, the presence of minor components in the infusion bags was visualized.

Field testing of user-friendly perennial malaria chemoprevention packaging in Benin, Côte d'Ivoire and Mozambique.

BACKGROUND: Perennial malaria chemoprevention (PMC) aims to protect children at risk from severe malaria by the administration of anti-malarial drugs to children of defined ages throughout the year. Sulfadoxine-pyrimethamine (SP) has been widely used for chemoprevention in Africa and a child-friendly dispersible tablet formulation has recently become available. METHODS: This qualitative non-interventional observational study was conducted in Benin, Côte d'Ivoire, and Mozambique between February and June 2022. Prototype blister packs, dispensing boxes and job aids designed to support dispersible SP deployment for PMC were evaluated using focus group discussions (FGD) and semi-structured in-depth individual interviews (IDI) with health authorities, health personnel, community health workers (CHWs) and caregivers. The aim was to evaluate knowledge and perceptions of malaria and chemoprevention, test understanding of the tools and identify gaps in understanding, satisfaction, user-friendliness and acceptability, and assess the potential role of CHWs in PMC implementation. Interviews were transcribed and imported to ATLAS.ti for encoding and categorization. Thematic content analysis used deductive and inductive coding with cross-referencing of findings between countries and participants to enrich data interpretation. Continuous comparison across the IDI and FGD permitted iterative, collaborative development of materials. RESULTS: Overall, 106 participants completed IDIs and 70 contributed to FGDs. Malaria was widely recognised as the most common disease affecting children, and PMC was viewed as a positive intervention to support child health. The role of CHWs was perceived differently by the target groups, with caregivers appreciating their trusted status in the community, whereas health authorities preferred clinic-based deployment of PMC by health professionals. Empirical testing of the prototype blister packs, dispensing boxes and job aids highlighted the context-specific expectations of respondents, such as familiar situations and equipment, and identified areas of confusion or low acceptance. A key finding was the need for a clear product identity reflecting malaria. CONCLUSION: Simple modifications profoundly affected the perception of PMC and influenced acceptability. Iterative quantitative investigation resulted in PMC-specific materials suited to the local context and socio-cultural norms of the target population with the aim of increasing access to chemoprevention in children most at risk of severe malaria.

Research on defect detection of bottle cap interior based on low-angle and large divergence angle vision system.

During the machine vision inspection of the inner section of bottle caps within pharmaceutical packaging, the unique conca bottom and convex side walls often create obstructions to the illumination. Consequently, this results in challenges such as irregular background and diminished feature contrast in the image, ultimately leading to the misidentification of defects. As a solution, a vision system characterized by a Low-Angle and Large Divergence Angle (LALDA) is presented in this paper. Using the large divergence angle of LED, combined with low-angle illumination, a uniform image of the side wall region with bright-field characteristics and a uniform image of inner circle region at the bottom with dark-field characteristics are obtained, thus solving the problems of light being obscured and brightness overexposure of the background. Based on the imaging characteristics of LALDA, a multi-channel segmentation (MCS) algorithm is designed. The HSV color space has been transformed, and the image is automatically segmented into multiple sub-regions by mutual calculation of different channels. Further, image homogenization and enhancement are used to eliminate fluctuations in the background and to enhance the contrast of defects. In addition, a variety of defect extraction methods are designed based on the imaging characteristics of different sub-regions, which can avoid the problem of over-segmentation in detection. In this paper, the LALDA is applied to the defect detection inside the cap of capsule medicine bottle, the detection speed is better than 400 pcs/min and the detection accuracy is better than 95%, which can meet the actual production line capacity and detection requirements.

Is Lyophilization Key for Transportation and Storage of Biopharmaceutical Drug Products in Space?

Long-lasting space missions as well as space tourism are technically possible today and economically in reach. It is a matter of time until the use of biopharmaceutical drug products in space will be common practice. Until drug product manufacturing in space is possible, the products need to be brought to space with rockets, which means that stable and light-weight products are preferred. Lyophilization is a promising approach to reduce weight during transportation and achieve storage stability at room temperature without cold-chain demands. This implies that recycled water in space needs to be used for reconstitution which poses a microbiological challenge and should be considered during formulation development. Furthermore, administration of the injectable drugs in space has an impact on the chosen packaging material which needs to be considered during drug product development.

Insights into Thermal Interactions in Frozen Pharmaceutical Vials: Effects on Ice Nucleation Times and Inhibition.

PURPOSE: This study investigates the thermal interactions between adjacent vials during freezing and assesses their impact on nucleation times. METHODS: Various loading configurations were analyzed to understand their impact on nucleation times. Configurations involving direct contact between vials and freeze-dryer shelves were studied, along with setups using empty vials between filled ones. Additionally, non-conventional loading configurations and glycol-filled vials were tested. The analysis includes 2R and 20R vials, which are commonly utilized in the freezing and lyophilization of drug products, along with two different fill depths, 1 and 1.4 cm. RESULTS: The investigation revealed that configurations with direct contact between vials and freeze-dryer shelves led to substantial thermal interactions, resulting in delayed nucleation in adjacent vials and affecting the temperature at which nucleation takes place in a complex way. In another setup, empty vials were placed between filled vials, significantly reducing thermal interactions. Further tests with non-conventional configurations and glycol-filled vials confirmed the presence of thermal interactions with a minimal inhibitory effect. CONCLUSIONS: These findings carry significant implications for the pharmaceutical industry, highlighting the role of thermal interactions among vials during freezing and their impact on the temperature at which ice nucleation occurs.

Characterization of Freezing Processes in Drug Substance Bottles by Ice Core Sampling.

Freezing of biological drug substance (DS) is a critical unit operation that may impact product quality, potentially leading to protein aggregation and sub-visible particle formation. Cryo-concentration has been identified as a critical parameter to impact protein stability during freezing and should therefore be minimized. The macroscopic cryo-concentration, in the following only referred to as cryo-concentration, is majorly influenced by the freezing rate, which is in turn impacted by product independent process parameters such as the DS container, its size and fill level, and the freezing equipment. (At-scale) process characterization studies are crucial to understand and optimize freezing processes. However, evaluating cryo-concentration requires sampling of the frozen bulk, which is typically performed by cutting the ice block into pieces for subsequent analysis. Also, the large amount of product requirement for these studies is a major limitation. In this study, we report the development of a simple methodology for experimental characterization of frozen DS in bottles at relevant scale using a surrogate solution. The novel ice core sampling technique identifies the axial ice core in the center to be indicative for cryo-concentration, which was measured by osmolality, and concentrations of histidine and polysorbate 80 (PS80), whereas osmolality revealed to be a sensitive read-out. Finally, we exemplify the suitability of the method to study cryo-concentration in DS bottles by comparing cryo-concentrations from different freezing protocols (-80°C vs -40°C). Prolonged stress times during freezing correlated to a higher extent of cryo-concentration quantified by osmolality in the axial center of a 2 L DS bottle.

Machine vision model for detection of foreign substances at the bottom of empty large volume parenteral.

Empty large volume parenteral (LVP) bottle has irregular shape and narrow opening, and its detection accuracy of the foreign substances at the bottom is higher than that of ordinary packaging bottles. The current traditional detection method for the bottom of LVP bottles is to directly use manual visual inspection, which involves high labor intensity and is prone to visual fatigue and quality fluctuations, resulting in limited applicability for the detection of the bottom of LVP bottles. A geometric constraint-based detection model (GCBDM) has been proposed, which combines the imaging model and the shape characteristics of the bottle to construct a constraint model of the imaging parameters, according to the detection accuracy and the field of view. Then, the imaging model is designed and optimized for the detection. Further, the generalized GCBDM has been adopted to different bottle bottom detection scenarios, such as cough syrup and capsule medicine bottles by changing the target parameters of the model. The GCBDM, on the one hand, can avoid the information at the bottom being blocked by the narrow opening in the imaging optical path. On the other hand, by calculating the maximum position deviation between the center of visual inspection and the center of the bottom, it can provide the basis for the accuracy design of the transmission mechanism in the inspection, thus further ensuring the stability of the detection.

Minitablets current use and future opportunities - An APV course on manufacturing, packaging, characterization and use of minitablets.

Recently, APV organized in collaboration with Fette Compacting GmbH a course on current use and future opportunities of minitablets. The course including a workshop was attended by 30 participants and focused on the manufacturing, packaging, characterization and medical use of minitablets. It took place at the Headquarter of Fette Compacting GmbH in Schwarzenbek. This article provides an overview on the topics presented and discussed during the course.

Investigating the Impact of Drone Transport on the Stability of Monoclonal Antibodies for Inter-Hospital Transportation.

In the field of healthcare logistics, the reliance on conventional transport methods such as cars for the delivery of monoclonal antibodies (mAbs) is susceptible to challenges posed by traffic and infrastructure, leading to increased and unpredictable transport times. Recognizing the potential role of drones in mitigating these challenges, we aimed to investigate the impact of medical drone transport on the stability of mAbs. Compromised stability could lead to aggregation and immunogenicity, thereby jeopardizing the efficacy and safety of mAbs. We studied the transportation of vials as well as ready-to-administer infusion bags with blinatumomab, tocilizumab, and daratumumab. The methodology involved the measurement of both temperature and mechanical shock during drone transport. Moreover, the analytical techniques High Performance Size-Exclusion Chromatography (HP-SEC), Dynamic Light Scattering (DLS), Light Obscuration (LO), Micro-Flow Imaging (MFI), and Nanoparticle Tracking Analysis (NTA) were employed to comprehensively assess the presence of aggregates and particle formation. The key findings revealed no significant differences between car and drone transport, indicating that the stability of mAbs in both vials and infusion bags was adequately maintained during drone transport. This suggests that medical drones are a viable and reliable means for the inter-hospital transport of mAbs, paving the way for more efficient and predictable logistics in healthcare delivery.

A Review on Commercial Oligonucleotide Drug Products.

Oligonucleotide drug products commercially approved in the US and the EU are reviewed. A total of 20 products that includes 1 aptamer, 12 antisense oligonucleotides (ASOs), 6 small interfering ribonucleic acids (siRNAs), and 1 mixture of single-stranded and double-stranded polydeoxyribonucleotides have been identified. A typical oligonucleotide formulation is composed of an oligonucleotide with buffering agent(s), pH adjusting agents, and a tonicity adjusting agent. All the products are presented as 2.1 - 200 mg/mL solutions at pH between 6 and 8.7. Majority of the products are approved for intravenous (IV) and subcutaneous (SC) routes, with two for intravitreal (IVT), two for intrathecal (IT), and one for intramuscular (IM) routes. The primary packaging includes vials and prefilled syringes (PFS). Products approved for IV and IT administration routes and requiring >1.5 mL dose volumes are supplied in vials, while those approved for SC, IM, and IVT and requiring ≤1.5 mL dose volume are supplied in PFS. Based on the compiled dataset, we propose a generalized starting point for an oligonucleotide formulation during early phase development for IV, SC, and IT administration routes. Overall, we believe this harmonized evaluation and understanding of various oligonucleotide drug product attributes will help derive platform generalizations and allows for accelerated early phase development for first-in-human studies.

Carboplatin desensitization - simplified 4-step 2-bag method.

INTRODUCTION: Our cancer program adopted a method for carboplatin desensitization (4-step 2-bag method) that administers the same intensity of drug exposure with a simplified approach to product management in comparison to a published protocol (4-step 4-bag method). METHODS: The intensity of carboplatin administration for 1:1,000, 1:100, 1:10, and 1:1 dilutions and concomitant fluid administration were compared for the 4-step 2-bag (bags A, B) and 4-step 4-bag (bags 1, 2, 3, 4) methods. Pharmacy preparation of bags A and B is described. A succinct overview of the desensitization procedure is provided. Important considerations germane to pharmacy practice are presented. Chart review of patients who underwent carboplatin desensitization with the 4-step 2-bag method between 7/13/2021 and 11/22/2023 was performed to demonstrate institutional use. RESULTS: The 4-step 2-bag method delivers similar rates of drug intensity from start of desensitization to completion of the planned dose as the previously published 4-step 4-bag method. Accuracy of regimen-based dose administration is assured by infusion of bag B contents irrespective of infusion interruptions or rate changes necessitated by patient tolerance. Bag A provides the 1:1000 dilution in a pharmaceutically elegant manner using administration rates and volumes compatible with clinical practice. CONCLUSION: The 4-step 2-bag method for carboplatin desensitization administers controlled drug titration corresponding to 1:1000, 1:100, 1:10, and 1:1 dilutions for dose administration using two compounded admixture bags. Inaugural clinical use of the 4-step 2-bag method for carboplatin desensitization at our healthcare facility has proceeded with expected patient tolerance.