ABSTRACT
Bacterial cellulose (BC) is a biopolymer synthesized by bacteria, which possess excellent characteristics such as high water holding capacity, high crystallinity, and high purity. It is widely used in food, medical, cosmetics, and functional films. Komagataeibacter xylinus is a model strain used in BC synthesis research. In bacteria, motility-related genes are associated with BC synthesis, whereas in Komagataeibacter xylinus CGMCC 2955, the functions of motility-related genes and their effects on BC synthesis are not known. To address this gap, we used the λ Red recombinant system to individually knock out motA, motB, and mot2A respectively, and constructed the knockout strains K. x-ΔmotA, K. x-ΔmotB, and K. x-Δmot2A. Additionally, both motA and motB were disrupted to construct the K. x-ΔmotAB mutant. The results demonstrated that knockout strain K. x-ΔmotAB exhibited the highest BC yield, reaching (5.05±0.26) g/L, which represented an increase of approximately 24% compared to wild-type strains. Furthermore, the BC synthesized by this strain exhibited the lowest porosity, 54.35%, and displayed superior mechanical properties with a Young's modulus of up to 5.21 GPa. As knocking out motA and motB genes in K. xylinus CGMCC 2955 did not reduce BC yield; instead, it promoted BC synthesis. Consequently, this research further deepened our understanding of the relationship between motility and BC synthesis in acetic acid bacteria. The knockouts of motA and motB genes resulted in reduced BC porosity and improved mechanical properties, provides a reference for BC synthesis and membrane structure regulation modification.
Subject(s)
Acetobacteraceae , Cellulose , Cellulose/biosynthesis , Cellulose/metabolism , Acetobacteraceae/genetics , Acetobacteraceae/metabolism , Gene Knockout Techniques , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Gluconacetobacter xylinus/genetics , Gluconacetobacter xylinus/metabolism , Genes, BacterialABSTRACT
Bacterial cellulose (BC), a nanostructured material, is renowned for its excellent properties. However, its production by bacteria is costly due to low medium utilization and conversion rates. To enhance the yield of BC, this study aimed to increase BC yield through genetic modification, specifically by overexpressing bcsC and bcsD in Gluconacetobacter xylinus, and by developing a modified culture method to reduce medium viscosity by adding water during fermentation. As a result, BC yields of 5.4, 6.2, and 6.8 g/L were achieved from strains overexpressing genes bcsC, bcsD, and bcsCD, significantly surpassing the yield of 2.2 g/L from wild-type (WT) strains. In the modified culture, the BC yields of all four strains increased by >1 g/L with the addition of 20 mL of water during fermentation. Upon comparing the properties of BC, minimal differences were observed between the WT and pbcsC strains, as well as between the static and modified cultures. In contrast, BC produced by strains overexpressing bcsD had a denser microstructural network and exhibited demonstrated higher tensile strength and elongation-to-break. Compared to WT, BC from bcsD overexpressed strains also displayed enhanced crystallinity, higher degree of polymerization and improved thermal stability.
Subject(s)
Gluconacetobacter xylinus , Nanostructures , Gluconacetobacter xylinus/genetics , Gluconacetobacter xylinus/metabolism , Cellulose/chemistry , Fermentation , WaterABSTRACT
The development of bacterial cellulose (BC) industrialization has been seriously affected by its production. Mannose/mannan is an essential component in many biomass resources, but Komagataeibacter xylinus uses mannose in an ineffective way, resulting in waste. The aim of this study was to construct recombinant bacteria to use mannose-rich biomass efficiently as an alternative and inexpensive carbon source in place of the more commonly used glucose. This strategy aimed at modification of the mannose catabolic pathway via genetic engineering of K. xylinus ATCC 23770 strain through expression of mannose kinase and phosphomannose isomerase genes from the Escherichia coli K-12 strain. Recombinant and wild-type strains were cultured under conditions of glucose and mannose respectively as sole carbon sources. The fermentation process and physicochemical properties of BC were investigated in detail in the strains cultured in mannose media. The comparison showed that with mannose as the sole carbon source, the BC yield from the recombinant strain increased by 84%, and its tensile strength and elongation were increased 1.7 fold, while Young's modulus was increased 1.3 fold. The results demonstrated a successful improvement in BC yield and properties on mannose-based medium compared with the wild-type strain. Thus, the strategy of modifying the mannose catabolic pathway of K. xylinus is feasible and has significant potential in reducing the production costs for industrial production of BC from mannose-rich biomass.
Subject(s)
Escherichia coli K12 , Gluconacetobacter xylinus , Mannose/metabolism , Cellulose/chemistry , Escherichia coli K12/metabolism , Gluconacetobacter xylinus/genetics , Gluconacetobacter xylinus/metabolism , Glucose/metabolism , Carbon/metabolismABSTRACT
Bacterial cellulose (BC), a natural polymer synthesized by bacteria, has received considerable attention owing to its impressive physicomechanical properties. However, the low productivity of BC-producing strains poses a challenge to industrializing this material and making it economically viable. In the present study, UV-induced random mutagenesis of Gluconacetobacter xylinus ATCC 53524 was performed to improve BC production. Sixty mutants were obtained from the following mutagenesis procedure: the correlation between UVC fluence and cell death was investigated, and a limited viability condition was determined as a UVC dose to kill 99.99 %. Compared to the control strain, BC production by the mutant strains LYP25 and LYP23 improved 46.4 % and 44.9 %, respectively. Fermentation profiling using the selected strains showed that LYP25 was superior in glucose consumption and BC production, 13.8 % and 41.0 %, respectively, compared to the control strain. Finally, the physicochemical properties of LYP25-derived BC were similar to those of the control strain; thus, the mutant strain is expected to be a promising producer of BC in the bio-industry based on improved productivity.
Subject(s)
Gluconacetobacter xylinus , Gluconacetobacter , Gluconacetobacter/genetics , Cellulose/chemistry , Fermentation , Gluconacetobacter xylinus/genetics , Gluconacetobacter xylinus/metabolism , Glucose/metabolismABSTRACT
Komagataeibacter xylinus is an aerobic strain that produces bacterial cellulose (BC). Oxygen levels play a critical role in regulating BC synthesis in K. xylinus, and an increase in oxygen tension generally means a decrease in BC production. Fumarate nitrate reduction protein (FNR) and aerobic respiration control protein A (ArcA) are hypoxia-inducible factors, which can signal whether oxygen is present in the environment. In this study, FNR and ArcA were used to enhance the efficiency of oxygen signaling in K. xylinus, and globally regulate the transcription of the genome to cope with hypoxic conditions, with the goal of improving growth and BC production. FNR and ArcA were individually overexpressed in K. xylinus, and the engineered strains were cultivated under different oxygen tensions to explore how their overexpression affects cellular metabolism and regulation. Although FNR overexpression did not improve BC production, ArcA overexpression increased BC production by 24.0% and 37.5% as compared to the control under oxygen tensions of 15% and 40%, respectively. Transcriptome analysis showed that FNR and ArcA overexpression changed the way K. xylinus coped with oxygen tension changes, and that both FNR and ArcA overexpression enhanced the BC synthesis pathway. The results of this study provide a new perspective on the effect of oxygen signaling on growth and BC production in K. xylinus and suggest a promising strategy for enhancing BC production through metabolic engineering. KEY POINTS: ⢠K. xylinus BC production increased after overexpression of ArcA ⢠The young's modulus is enhanced by the ArcA overexpression ⢠ArcA and FNR overexpression changed how cells coped with changes in oxygen tension.
Subject(s)
Cellulose , Gluconacetobacter xylinus , Humans , Cellulose/metabolism , Nitrates/metabolism , Gluconacetobacter xylinus/genetics , Gluconacetobacter xylinus/metabolism , Oxygen/metabolism , Fumarates/metabolism , HypoxiaABSTRACT
Gluconacetobacter xylinus is a primary strain producing bacterial cellulose (BC). In G. xylinus, BcsD is a subunit of cellulose synthase and is participated in the assembly process of BC. A series of G. xylinus with different expression levels of the bcsD gene were obtained by using the CRISPR/dCas9 technique. Analysis of the structural characteristics of BC showed that the crystallinity and porosity of BC changed with the expression of bcsD. The porosity varied from 59.95%-84.05%, and the crystallinity varied from 74.26%-93.75%, while the yield of BC did not decrease significantly upon changing the expression levels of bcsD. The results showed that the porosity of bacterial cellulose significantly increased, while the crystallinity was positively correlated with the expression of bcsD, when the expression level of bcsD was below 55.34%. By altering the expression level of the bcsD gene, obtaining BC with different structures but stable yield through a one-step fermentation of G. xylinus was achieved.
Subject(s)
Cellulose , Gluconacetobacter xylinus , Cellulose/chemistry , Clustered Regularly Interspaced Short Palindromic Repeats , Fermentation , Gluconacetobacter xylinus/genetics , Gluconacetobacter xylinus/metabolismABSTRACT
Bacterial cellulose (BC) is an abundant biopolymer with a wide range of potential industrial applications. However, the industrial application of BC has been hampered by inefficient production. This study aims to investigate the influence of a spontaneous mutation that results in decreased cellulose production by a Komagataeibacter xylinus strain. The yields of cellulose are significantly different under different culture conditions, which imply that the shearing force is responsible for the selection of spontaneous mutants. Fermenter culture conditions under shake-flask culture conditions are further simulated. The shearing force activates the conversion of microbial cells to Cel- mutants, and the accumulation of water-soluble exopolysaccharides is observed. The Cel+ cells under agitated culture are not easily converted into Cel- mutants upon the addition of water-soluble exopolysaccharides synthesized by K. xylinus and a viscous polysaccharide, such as xanthan gum. The conversion ratio of Cel+ cells to Cel- mutants is strongly related to the shearing force and viscosity of the fermentation broth. The synthetic pathways of bacterial cellulose and water-soluble polysaccharides are independent of each other at the genetic level. However, a substrate competitive relationship between these two polysaccharides is found, which is significant in terms of the optimization of cellulose production in commercial processes.
Subject(s)
Cellulose , Gluconacetobacter xylinus , Bacteria/metabolism , Biopolymers , Fermentation , Gluconacetobacter xylinus/genetics , Gluconacetobacter xylinus/metabolism , WaterABSTRACT
Quorum sensing is a mechanism that facilitates cell-to-cell communication. Through signal molecular density for signal recognition, which leads to the regulation of some physiological and biochemical functions. Gluconacetobacter xylinus CGMCC 2955, which produces bacterial cellulose (BC), synthesizes the LuxR protein belonging to the LuxI/LuxR type QS system. Here, a luxR overexpression vector was transformed into G. xylinus CGMCC 2955. The overexpression of luxR increased the yield of BC by 15.6% after 16 days static culture and reduced the cell density by 15.5% after 120-h-agitated culture. The glucose was used up by G. xylinus-pMV24-luxR at 72-h-agitated fermentation, which 12 h earlier than the wild-type (WT). The total N-acylhomoserine lactones (AHL) content of the luxR-overexpressing strain and the WT strain attained 1367.9 ± 57.86 mg/L and 842.9 ± 54.22 mg/L, respectively. The C12-HSL and C14-HSL contents of G. xylinus-pMV24-luxR were 202 ± 21.66 mg/L and 409.6 ± 0.91 mg/L, which were significantly lower than that of WT. In contrast, C6-HSL showed opposite results. The difference of AHL content proved that overexpression of luxR improved the binding of AHL and showed preference for some specific AHL. The metabolic results demonstrated that upon glucose exhaustion, the consumption of gluconic acid was promoted by luxR overexpression, and the content of D- ( +)-trehalose, an antiretrograde metabolite, increased significantly. KEY POINTS: ⢠The overexpression of luxR increased the yield of bacterial cellulose ⢠The content of signal molecules was significantly different ⢠Differential metabolites were involved in multiple metabolic pathways.
Subject(s)
Gluconacetobacter xylinus , Quorum Sensing , Acyl-Butyrolactones , Bacterial Proteins/genetics , Cellulose , Gluconacetobacter xylinus/genetics , Trans-Activators/geneticsABSTRACT
Komagataeibacter xylinus has received increasing attention as an important microorganism for the conversion of several carbon sources to bacterial cellulose (BC). However, BC productivity has been impeded by the lack of efficient genetic engineering techniques. In this study, a lambda Red and FLP/FRT-mediated site-specific recombination system was successfully established in Komagataeibacter xylinus. Using this system, the membrane bound gene gcd, a gene that encodes glucose dehydrogenase, was knocked out to reduce the modification of glucose to gluconic acid. The engineered strain could not produce any gluconic acid and presented a decreased bacterial cellulose (BC) production due to its restricted glucose utilization. To address this problem, the gene of glucose facilitator protein (glf; ZMO0366) was introduced into the knockout strain coupled with the overexpression of the endogenous glucokinase gene (glk). The BC yield of the resultant strain increased by 63.63-173.68%, thus reducing the production cost.
Subject(s)
Bacteria/genetics , Cellulose/genetics , DNA Nucleotidyltransferases/genetics , Gluconacetobacter xylinus/genetics , Recombination, Genetic/genetics , Carbon/metabolism , Gluconates/metabolism , Glucose/geneticsABSTRACT
Bacterial cellulose (BC) has outstanding physical and chemical properties, including high crystallinity, moisture retention, and tensile strength. Currently, the major producer of BC is Komagataeibacter xylinus. However, due to limited tools of expression, this host is difficult to engineer metabolically to improve BC productivity. In this study, a regulated expression system for K. xylinus with synthetic ribosome binding site (RBS) was developed and used to engineer a BC biosynthesis pathway. A synthetic RBS library was constructed using green fluorescent protein (GFP) as a reporter, and three synthetic RBSs (R4, R15, and R6) with different strengths were successfully isolated by fluorescence-activated cell sorting (FACS). Using synthetic RBS, we optimized the expression of three homologous genes responsible for BC production, pgm, galU, and ndp, and thereby greatly increased it under both static and shaking culture conditions. The final titer of BC under static and shaking conditions was 5.28 and 3.67 g/l, respectively. Our findings demonstrate that reinforced metabolic flux towards BC through quantitative gene expression represents a practical strategy for the improvement of BC productivity.
Subject(s)
Biosynthetic Pathways/genetics , Cellulose/metabolism , Gluconacetobacter xylinus/metabolism , Ribosomes/metabolism , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Base Sequence , Binding Sites/genetics , Cellulose/genetics , Gene Library , Gluconacetobacter xylinus/genetics , Metabolic Engineering , Metabolic Flux AnalysisABSTRACT
Diverse applications of bacterial cellulose (BC) have different requirements in terms of its structural characteristics. culturing Komagataeibacter xylinus CGMCC 2955, BC structure changes with alterations in oxygen tension. Here, the K. xylinus CGMCC 2955 transcriptome was analyzed under different oxygen tensions. Transcriptome and genome analysis indicated that BC structure is related to the rate of BC synthesis and cell growth, and galU is an essential gene that controls the carbon metabolic flux between the BC synthesis pathway and the pentose phosphate (PP) pathway. The CRISPR interference (CRISPRi) system was utilized in K. xylinus CGMCC 2955 to control the expression levels of galU. By overexpressing galU and interfering with different sites of galU sequences using CRISPRi, we obtained strains with varying expression levels of galU (3.20-3014.84%). By testing the characteristics of BC, we found that the porosity of BC (range: 62.99-90.66%) was negative with galU expression levels. However, the crystallinity of BC (range: 56.25-85.99%) was positive with galU expression levels; galU expression levels in engineered strains were lower than those in the control strains. Herein, we propose a new method for regulating the structure of BC to provide a theoretical basis for its application in different fields.
Subject(s)
Bacterial Proteins/genetics , Cellulose/genetics , Gluconacetobacter xylinus/genetics , UTP-Glucose-1-Phosphate Uridylyltransferase/genetics , CRISPR-Cas Systems , Cellulose/chemistry , Clustered Regularly Interspaced Short Palindromic Repeats , Down-Regulation , TranscriptomeABSTRACT
Bacterial cellulose (BC) has received considerable attention as an environment-friendly, biodegradable nanomaterial. In this study, the strain Komagataeibacter sp. nov. CGMCC 17276, which showed rapid cell growth and high BC-production ability, was isolated and classified into a novel species in the Komagataeibacter genus. Four BC synthase operons were annotated using whole-genome analysis, partially explaining the high BC yield of strain CGMCC 17276. Operons bcs â ¡ and bcs â ¢ showed high transcriptional levels under static and agitated culture conditions, indicating their importance in BC synthesis. Of the eight suitable carbon sources identified by whole-genome analysis, the highest BC production was achieved using glycerol as a single carbon source. Finally, waste glycerol was successfully used as an eco-friendly and sustainable strategy for BC production. This study provides valuable insights into the mechanism of BC synthesis, genetic structure of BC-producing strains, and industrialization of BC production using an eco-friendly and low-cost strategy.
Subject(s)
Cellulose/biosynthesis , Gluconacetobacter xylinus/genetics , Cellulose/genetics , DNA, Bacterial/genetics , Fermentation , Gluconacetobacter xylinus/metabolism , Sequence Analysis, DNAABSTRACT
BACKGROUND: Cellulose is synthesized by an array of bacterial species. Komagataeibacter xylinus is the best characterized as it produces copious amounts of the polymer extracellularly. Despite many advances in the past decade, the mechanisms underlying cellulose biosynthesis are not completely understood. Elucidation of these mechanisms is essential for efficient cellulose production in industrial applications. RESULTS: In an effort to gain a better understanding of cellulose biosynthesis and its regulation, cellulose crystallization was investigated in K. xylinus mutants resistant to an inhibitor of cellulose I formation, pellicin. Through the use of forward genetics and site-directed mutagenesis, A449T and A449V mutations in the K. xylinus BcsA protein were found to be important for conferring high levels of pellicin resistance. Phenotypic analysis of the bcsAA449T and bcsAA449V cultures revealed that the mutations affect cellulose synthesis rates and that cellulose crystallinity is affected in wet pellicles but not dry ones. CONCLUSIONS: A449 is located in a predicted transmembrane domain of the BcsA protein suggesting that the structure of the transmembrane domain influences cellulose crystallization either by affecting the translocation of the nascent glucan chain or by allosterically altering protein-protein interactions.
Subject(s)
Bacterial Proteins/genetics , Cellulose/biosynthesis , Gluconacetobacter xylinus/metabolism , Glucosyltransferases/genetics , Bacterial Proteins/chemistry , Cellulose/antagonists & inhibitors , Cellulose/chemistry , Chalcones/pharmacology , Crystallization , Drug Resistance, Bacterial/genetics , Gluconacetobacter xylinus/drug effects , Gluconacetobacter xylinus/genetics , Gluconacetobacter xylinus/ultrastructure , Glucosyltransferases/chemistry , Mutation, Missense , Oxocins/pharmacology , Protein DomainsABSTRACT
Based on cellulose biosynthesis pathway of Gluconacetobacterxylinus BPR2001 and E. coli Nissle 1917, bcsA and bcsB genes have been selected and bioinformatics studies done to the analyses of nucleotide and amino acid sequence alignment, stability of RNA, protein, and promotor power. We amplify and clone bcsA, bcsB, and bcsAB genes of G. xylinus BPR2001 in Escherichiacoli Nissle 1917 under the inducible tac promoter. Our results of bioinformatics predictions demonstrate similar active site and three-dimensional structure of BcsA and BcsB proteins in two different bacteria. In addition, our data reveal that BcsA and BcsB proteins of E. coli have weaker promotor power, RNA secondary structure, and protein stability than that of the same proteins in G. xylinus. Some of the reasons of BcsAB protein selection from G. xylinus and its heterologous expression in E. coli is the noted points. Production of the related proteins visualized using SDS-PAGE. We find out that Congo red absorbance at 490 nm has no significant difference in wild-type strain (E. coli Nissle 1917) compared to recombinants bcsA+ or bcsB+, but recombinant bcsAB+ could produce more cellulose than that of the wild-type strain. Furthermore, the measurement of cellulose dry weights of all samples confirms bacterial cellulose production enhancement in recombinant bcsAB+ (1.94 g l-1). The FTIR analysis reveals that the crystallinity indices do not change significantly after over expressing each of genes.
Subject(s)
Bacterial Proteins/metabolism , Cellulose/biosynthesis , Escherichia coli/metabolism , Genes, Bacterial , Gluconacetobacter xylinus/metabolism , Industrial Microbiology/methods , Binding Sites , Computational Biology , Congo Red/chemistry , Escherichia coli Proteins/metabolism , Gluconacetobacter xylinus/genetics , Glucosyltransferases/metabolism , Intracellular Signaling Peptides and Proteins/metabolism , Nucleic Acid Conformation , Plasmids , Promoter Regions, Genetic , Protein Conformation , Recombinant Proteins/metabolism , Spectroscopy, Fourier Transform InfraredABSTRACT
Complete genome sequence of Gluconacetobacter xylinus CGMCC 2955 for fine control of bacterial cellulose (BC) synthesis is presented here. The genome, at 3,563,314 bp, was found to contain 3,193 predicted genes without gaps. There are four BC synthase operons (bcs), among which only bcsI is structurally complete, comprising bcsA, bcsB, bcsC, and bcsD. Genes encoding key enzymes in glycolytic, pentose phosphate, and BC biosynthetic pathways and in the tricarboxylic acid cycle were identified. G. xylinus CGMCC 2955 has a complete glycolytic pathway because sequence data analysis revealed that this strain possesses a phosphofructokinase (pfk)-encoding gene, which is absent in most BC-producing strains. Furthermore, combined with our previous results, the data on metabolism of various carbon sources (monosaccharide, ethanol, and acetate) and their regulatory mechanism of action on BC production were explained. Regulation of BC synthase (Bcs) is another effective method for precise control of BC biosynthesis, and cyclic diguanylate (c-di-GMP) is the key activator of BcsA-BcsB subunit of Bcs. The quorum sensing (QS) system was found to positively regulate phosphodiesterase, which decomposed c-di-GMP. Thus, in this study, we demonstrated the presence of QS in G. xylinus CGMCC 2955 and proposed a possible regulatory mechanism of QS action on BC production.
Subject(s)
Cellulose/biosynthesis , Genome, Bacterial , Gluconacetobacter xylinus/genetics , Cellulose/metabolism , Gene Expression Regulation, Enzymologic , Gluconacetobacter xylinus/metabolism , Glucosyltransferases/genetics , Metabolic Networks and Pathways , Operon , Quorum SensingABSTRACT
Oxygen plays a key role during bacterial cellulose (BC) biosynthesis by Gluconacetobacter xylinus. In this study, the Vitreoscilla hemoglobin (VHb)-encoding gene vgb, which has been widely applied to improve cell survival during hypoxia, was heterologously expressed in G. xylinus via the pBla-VHb-122 plasmid. G. xylinus and G. xylinus-vgb + were statically cultured under hypoxic (10 and 15% oxygen tension in the gaseous phase), atmospheric (21%), and oxygen-enriched conditions (40 and 80%) to investigate the effect of oxygen on cell growth and BC production. Irrespective of vgb expression, we found that cell density increased with oxygen tension (10-80%) during the exponential growth phase but plateaued to the same value in the stationary phase. In contrast, BC production was found to significantly increase at lower oxygen tensions. In addition, we found that BC production at oxygen tensions of 10 and 15% was 26.5 and 58.6% higher, respectively, in G. xylinus-vgb + than that in G. xylinus. The maximum BC yield and glucose conversion rate, of 4.3 g/L and 184.7 mg/g, respectively, were observed in G. xylinus-vgb + at an oxygen tension of 15%. Finally, BC characterization suggested that hypoxic conditions enhance BC's mass density, Young's modulus, and thermostability, with G. xylinus-vgb + synthesizing softer BC than G. xylinus under hypoxia as a result of a decreased Young's modulus. These results will facilitate the use of static culture for the production of BC.
Subject(s)
Bacterial Proteins/metabolism , Cellulose/biosynthesis , Gluconacetobacter xylinus/metabolism , Hemeproteins/metabolism , Oxygen/metabolism , Truncated Hemoglobins/metabolism , Anaerobiosis , Bacterial Proteins/genetics , Carbohydrate Metabolism , Elastic Modulus , Gene Expression Regulation, Bacterial , Gluconacetobacter xylinus/genetics , Glucose/metabolism , Hemeproteins/genetics , Truncated Hemoglobins/genetics , Vitreoscilla/geneticsABSTRACT
BACKGROUND: Through pretreatment and enzymatic saccharification lignocellulosic biomass has great potential as a low-cost feedstock for production of bacterial nanocellulose (BNC), a high value-added microbial product, but inhibitors formed during pretreatment remain challenging. In this study, the tolerance to lignocellulose-derived inhibitors of three new BNC-producing strains were compared to that of Komagataeibacter xylinus ATCC 23770. Inhibitors studied included furan aldehydes (furfural and 5-hydroxymethylfurfural) and phenolic compounds (coniferyl aldehyde and vanillin). The performance of the four strains in the presence and absence of the inhibitors was assessed using static cultures, and their capability to convert inhibitors by oxidation and reduction was analyzed. RESULTS: Although two of the new strains were more sensitive than ATCC 23770 to furan aldehydes, one of the new strains showed superior resistance to both furan aldehydes and phenols, and also displayed high volumetric BNC yield (up to 14.78 ± 0.43 g/L) and high BNC yield on consumed sugar (0.59 ± 0.02 g/g). The inhibitors were oxidized and/or reduced by the strains to be less toxic. The four strains exhibited strong similarities with regard to predominant bioconversion products from the inhibitors, but displayed different capacity to convert the inhibitors, which may be related to the differences in inhibitor tolerance. CONCLUSIONS: This investigation provides information on different performance of four BNC-producing strains in the presence of lignocellulose-derived inhibitors. The results will be of benefit to the selection of more suitable strains for utilization of lignocellulosics in the process of BNC-production.
Subject(s)
Bacteria/metabolism , Cellulose/metabolism , Gluconacetobacter xylinus/metabolism , Lignin/metabolism , Aldehydes/analysis , Aldehydes/metabolism , Bacteria/genetics , Bacteria/growth & development , Biomass , Furaldehyde/analysis , Furaldehyde/metabolism , Gluconacetobacter xylinus/genetics , Gluconacetobacter xylinus/growth & development , Lignin/chemistryABSTRACT
OBJECTIVES: To evaluate the crystallinity index of the cellulose produced by Escherichia coli Nissle 1917 after heterologous expression of the cellulose synthase subunit D (bcsD) gene of Gluconacetobacter xylinus BPR2001. RESULTS: The bcsD gene of G. xylinus BPR2001 was expressed in E. coli and its protein product was visualized using SDS-PAGE. FTIR analysis showed that the crystallinity index of the cellulose produced by the recombinants was 0.84, which is 17% more than that of the wild type strain. The increased crystallinity index was also confirmed by X-ray diffraction analysis. The cellulose content was not changed significantly after over-expressing the bcsD. CONCLUSION: The bcsD gene can improve the crystalline structure of the bacterial cellulose but there is not any significant difference between the amounts of cellulose produced by the recombinant and wild type E. coli Nissle 1917.
Subject(s)
Cellulose/metabolism , Escherichia coli/metabolism , Gluconacetobacter xylinus/enzymology , Glucosyltransferases/metabolism , Metabolic Engineering/methods , Recombinant Proteins/metabolism , Cellulose/chemistry , Escherichia coli/enzymology , Escherichia coli/genetics , Gene Expression , Gluconacetobacter xylinus/genetics , Glucosyltransferases/genetics , Protein Subunits/genetics , Protein Subunits/metabolism , Recombinant Proteins/genetics , Spectroscopy, Fourier Transform Infrared , X-Ray DiffractionABSTRACT
BACKGROUND: Acetic acid bacteria (AAB) are well known producers of commercially used exopolysaccharides, such as cellulose and levan. Kozakia (K.) baliensis is a relatively new member of AAB, which produces ultra-high molecular weight levan from sucrose. Throughout cultivation of two K. baliensis strains (DSM 14400, NBRC 16680) on sucrose-deficient media, we found that both strains still produce high amounts of mucous, water-soluble substances from mannitol and glycerol as (main) carbon sources. This indicated that both Kozakia strains additionally produce new classes of so far not characterized EPS. RESULTS: By whole genome sequencing of both strains, circularized genomes could be established and typical EPS forming clusters were identified. As expected, complete ORFs coding for levansucrases could be detected in both Kozakia strains. In K. baliensis DSM 14400 plasmid encoded cellulose synthase genes and fragments of truncated levansucrase operons could be assigned in contrast to K. baliensis NBRC 16680. Additionally, both K. baliensis strains harbor identical gum-like clusters, which are related to the well characterized gum cluster coding for xanthan synthesis in Xanthomanas campestris and show highest similarity with gum-like heteropolysaccharide (HePS) clusters from other acetic acid bacteria such as Gluconacetobacter diazotrophicus and Komagataeibacter xylinus. A mutant strain of K. baliensis NBRC 16680 lacking EPS production on sucrose-deficient media exhibited a transposon insertion in front of the gumD gene of its gum-like cluster in contrast to the wildtype strain, which indicated the essential role of gumD and of the associated gum genes for production of these new EPS. The EPS secreted by K. baliensis are composed of glucose, galactose and mannose, respectively, which is in agreement with the predicted sugar monomer composition derived from in silico genome analysis of the respective gum-like clusters. CONCLUSIONS: By comparative sugar monomer and genome analysis, the polymeric substances secreted by K. baliensis can be considered as unique HePS. Via genome sequencing of K. baliensis DSM 14400 + NBRC 16680 we got first insights into the biosynthesis of these novel HePS, which is related to xanthan and acetan biosynthesis. Consequently, the present study provides the basis for establishment of K. baliensis strains as novel microbial cell factories for biotechnologically relevant, unique polysaccharides.
Subject(s)
Acetic Acid/metabolism , Acetobacteraceae/genetics , Acetobacteraceae/metabolism , Genome, Bacterial , Polysaccharides, Bacterial/biosynthesis , Acetobacteraceae/growth & development , Bacterial Proteins/genetics , Base Sequence , Cellulose/biosynthesis , Cellulose/genetics , Computer Simulation , DNA Transposable Elements , Fructans/biosynthesis , Gluconacetobacter xylinus/genetics , Glycerol/metabolism , Mannitol/metabolism , Operon , Polysaccharides, Bacterial/chemistry , Polysaccharides, Bacterial/genetics , Sequence Analysis, DNA , Sucrose/metabolismABSTRACT
AIMS: A high-quality inoculum of Gluconacetobacter xylinus is important to produce bacterial cellulose (BC), a versatile biomaterial. This work aims to develop a method of preparing an inoculum of this bacterium with high cell density and without mutants. METHODS AND RESULTS: Inocula of G. xylinus ACCC 10220 without and with cellulase or carboxymethyl cellulose (CMC) were prepared in shaken culture. BC pellets and BC-negative mutants were present in the inoculum without additives but absent in the inoculum with additives. Based on BC weights statically produced in fresh BC-producing media initiated by different seed culture, the 24-h-shaken inoculum with 1·50% (w/v) CMC was the best because of high biomass and absence of mutants. The BC weights in fresh media inoculated by the 96-h-static inoculum and 24-h-shaken CMC inoculum at 7% (v/v) were 0·70 and 1·05 g l(-1) , respectively, implying significant difference (P < 0·01) in BC weights. However, structure properties of the two BC samples, including the crystallinity index, mass fraction of cellulose Iα , degree of polymerization (DP) and micromorphology were slightly different. CONCLUSIONS: The 24-h-shaken CMC inoculum was the most suitable for a starter culture of BC. SIGNIFICANCE AND IMPACT OF THE STUDY: A novel method of preparing G. xylinus inoculum in shaken culture was developed, featuring high biomass, absence of mutants and no BC entanglements. Cellulase or CMC added into the medium completely suppressed mutation of G. xylinus, and CMC facilitated to form colloidal BC with the low DP in shaken culture, indicating less BC stress to cells. These findings suggested the mutation could be induced by BC stress, and not by shear stress commonly accepted.