Immediate auditory feedback regulates inter-articulator speech coordination in service to phonetic structure.

Research has shown that talkers reliably coordinate the timing of articulator movements across variation in production rate and syllable stress, and that this precision of inter-articulator timing instantiates phonetic structure in the resulting acoustic signal. We here tested the hypothesis that immediate auditory feedback helps regulate that consistent articulatory timing control. Talkers with normal hearing recorded 480 /tV#Cat/ utterances using electromagnetic articulography, with alternative V (/ɑ/-/ɛ/) and C (/t/-/d/), across variation in production rate (fast-normal) and stress (first syllable stressed-unstressed). Utterances were split between two listening conditions: unmasked and masked. To quantify the effect of immediate auditory feedback on the coordination between the jaw and tongue-tip, the timing of tongue-tip raising onset for C, relative to the jaw opening-closing cycle for V, was obtained in each listening condition. Across both listening conditions, any manipulation that shortened the jaw opening-closing cycle reduced the latency of tongue-tip movement onset, relative to the onset of jaw opening. Moreover, tongue-tip latencies were strongly affiliated with utterance type. During auditory masking, however, tongue-tip latencies were less strongly affiliated with utterance type, demonstrating that talkers use afferent auditory signals in real-time to regulate the precision of inter-articulator timing in service to phonetic structure.

The functional role of the rabbit digastric muscle during mastication.

Muscle spindle abundance is highly variable in vertebrates, but the functional determinants of this variation are unclear. Recent work has shown that human leg muscles with the lowest abundance of muscle spindles primarily function to lengthen and absorb energy, while muscles with a greater spindle abundance perform active-stretch-shorten cycles with no net work, suggesting that muscle spindle abundance may be underpinned by muscle function. Compared with other mammalian muscles, the digastric muscle contains the lowest abundance of muscle spindles and, therefore, might be expected to generate substantial negative work. However, it is widely hypothesised that as a jaw-opener (anatomically) the digastric muscle would primarily function to depress the jaw, and consequently do positive work. Through a combination of X-ray reconstruction of moving morphology (XROMM), electromyography and fluoromicrometry, we characterised the 3D kinematics of the jaw and digastric muscle during feeding in rabbits. Subsequently, the work loop technique was used to simulate in vivo muscle behaviour in situ, enabling muscle force to be quantified in relation to muscle strain and hence determine the muscle's function during mastication. When functioning on either the working or balancing side, the digastric muscle generates a large amount of positive work during jaw opening, and a large amount of negative work during jaw closing, on average producing a relatively small amount of net negative work. Our data therefore further support the hypothesis that muscle spindle abundance is linked to muscle function; specifically, muscles that absorb a relatively large amount of negative work have a low spindle abundance.

Sources of Rapid and Delayed New Lower Jaw Input in the Forepaw Barrel Subfield (FBS) in Rat Primary Somatosensory Cortex (SI) Following Forelimb Deafferentation.

Previously, we reported an immediate emergence of new lower jaw input to the anterior forepaw barrel subfield (FBS) in primary somatosensory cortex (SI) following forelimb deafferentation. However, a delay of 7 weeks or more post-amputation results in the presence of this new input to both anterior and posterior FBS. The immediate change suggests pre-existing latent lower jaw input in the FBS, whereas the delayed alteration implies the involvement of alternative sources. One possible source for immediate lower jaw responses is the neighboring lower jaw barrel subfield (LJBSF). We used anatomical tracers to investigate the possible projection of LJBSF to the FBS in normal and forelimb-amputated rats. Our findings are as follows: (1) anterograde tracer injection into LJBSF in normal and amputated rats labeled fibers and terminals exclusively in the anterior FBS; (2) retrograde tracer injection in the anterior FBS in normal and forelimb-amputated rats, heavily labeled cell bodies predominantly in the posterior LJBSF, with fewer in the anterior LJBSF; (3) retrograde tracer injection in the posterior FBS in normal and forelimb-amputated rats, sparsely labeled cell bodies in the posterior LJBSF; (4) retrograde tracer injection in anterior and posterior FBS in normal and forelimb-amputated rats, labeled cells exclusively in ventral posterior lateral (VPL) nucleus and posterior thalamus (PO); (5) retrograde tracer injection in LJBSF-labeled cell bodies exclusively in ventral posterior medial thalamic nucleus and PO. These findings suggest that LJBSF facilitates rapid lower jaw reorganization in the anterior FBS, whereas VPL and/or other subcortical sites provide a likely substrate for delayed reorganization observed in the posterior FBS.

Evolution of tooth morphological complexity and its association with the position of tooth eruption in the jaw in non-mammalian synapsids.

Heterodonty and complex molar morphology are important characteristics of mammals acquired during the evolution of early mammals from non-mammalian synapsids. Some non-mammalian synapsids had only simple, unicuspid teeth, whereas others had complex, multicuspid teeth. In this study, we reconstructed the ancestral states of tooth morphological complexity across non-mammalian synapsids to show that morphologically complex teeth evolved independently multiple times within Therapsida and that secondary simplification of tooth morphology occurred in some non-mammalian Cynodontia. In some mammals, secondary evolution of simpler teeth from complex molars has been previously reported to correlate with an anterior shift of tooth eruption position in the jaw, as evaluated by the dentition position relative to the ends of component bones used as reference points in the upper jaw. Our phylogenetic comparative analyses showed a significant correlation between an increase in tooth complexity and a posterior shift in the dentition position relative to only one of the three specific ends of component bones that we used as reference points in the upper jaw of non-mammalian synapsids. The ends of component bones depend on the shape and relative area of each bone, which appear to vary considerably among the synapsid taxa. Quantification of the dentition position along the anteroposterior axis in the overall cranium showed suggestive evidence of a correlation between an increase in tooth complexity and a posterior shift in the dentition position among non-mammalian synapsids. This correlation supports the hypothesis that a posterior shift of tooth eruption position relative to the morphogenetic fields that determine tooth form have contributed to the evolution of morphologically complex teeth in non-mammalian synapsids, if the position in the cranium represents a certain point in the morphogenetic fields.

Chewing shrews: Examining the morphology and function of the masticatory musculature in Soricidae via diffusible iodine-based contrast-enhanced computed tomography.

Essential for sustaining a high metabolic rate is the efficient fragmentation of food, which is determined by molar morphology and the movement of the jaw. The latter is related to the jaw morphology and the arrangement of the masticatory muscles. Soricid jaw apparatuses are unique among mammals, as the articulation facet on the condylar process is separated into a dorsal and a ventral part, which has often been linked to more differentiated jaw motions. Soricidae also possess a remarkably elongated angular process. However, the precise function of the unique morphology of soricid jaw apparatuses has not been fully understood yet. By digitally reconstructing the masticatory musculature via the diffusible iodine-based contrast-enhanced computed tomography technique, we show how the unique jaw morphology is reflected in the spatial organization as well as the inner architecture and respective fascicle orientations of the muscles. From the lines of action of the m. masseter and the m. pterygoideus internus, both muscles inserting on the lateral and medial side of the angular process, respectively, we infer that the angular process is substantial for roll and yaw rotations of the mandible. The m. masseter is subdivided into four and the m. pterygoideus internus into five subunits, each exhibiting a slightly different line of action and torque. This enables Soricidae to adjust and adapt these rotational movements according to the properties of the ingested food, allowing for more efficient fragmentation. Additionally, those guided rotational motions allow for precise occlusion despite tooth wear. The temporalis is the largest of the adductor muscles and is mainly responsible for exerting the bite force. Overall, the unique jaw bone morphology in conjunction with the complex muscle arrangement may contribute towards a more efficient energy gain and the maintenance of a high metabolic rate, which is crucial for small-bodied mammals such as shrews.

Widespread convergence towards functional optimization in the lower jaws of crocodile-line archosaurs.

Extant crocodilian jaws are subject to functional demands induced by feeding and hydrodynamics. However, the morphological and ecological diversity of extinct crocodile-line archosaurs is far greater than that of living crocodilians, featuring repeated convergence towards disparate ecologies including armoured herbivores, terrestrial macropredators and fully marine forms. Crocodile-line archosaurs, therefore, present a fascinating case study for morphological and functional divergence and convergence within a clade across a wide range of ecological scenarios. Here, we build performance landscapes of two-dimensional theoretical jaw shapes to investigate the influence of strength, speed and hydrodynamics in the morphological evolution of crocodile-line archosaur jaws, and test whether ecologically convergent lineages evolved similarly optimal jaw function. Most of the 243 sampled jaw morphologies occupy optimized regions of theoretical morphospace for either rotational efficiency, resistance to Von Mises stress, hydrodynamic efficiency or a trade-off between multiple functions, though some seemingly viable shapes remain unrealized. Jaw speed is optimized only in a narrow region of morphospace whereas many shapes possess optimal jaw strength, which may act as a minimum boundary rather than a strong driver for most taxa. This study highlights the usefulness of theoretical morphology in assessing functional optimality, and for investigating form-function relationships in diverse clades.

Vocal tract dynamics shape the formant structure of conditioned vocalizations in a harbor seal.

Formants, or resonance frequencies of the upper vocal tract, are an essential part of acoustic communication. Articulatory gestures-such as jaw, tongue, lip, and soft palate movements-shape formant structure in human vocalizations, but little is known about how nonhuman mammals use those gestures to modify formant frequencies. Here, we report a case study with an adult male harbor seal trained to produce an arbitrary vocalization composed of multiple repetitions of the sound wa. We analyzed jaw movements frame-by-frame and matched them to the tracked formant modulation in the corresponding vocalizations. We found that the jaw opening angle was strongly correlated with the first (F1) and, to a lesser degree, with the second formant (F2). F2 variation was better explained by the jaw angle opening when the seal was lying on his back rather than on the belly, which might derive from soft tissue displacement due to gravity. These results show that harbor seals share some common articulatory traits with humans, where the F1 depends more on the jaw position than F2. We propose further in vivo investigations of seals to further test the role of the tongue on formant modulation in mammalian sound production.

Homogenized finite element simulations can predict the primary stability of dental implants in human jawbone.

Adequate primary stability is a pre-requisite for the osseointegration and long-term success of dental implants. Primary stability depends essentially on the bone mechanical integrity at the implantation site. Clinically, a qualitative evaluation can be made on medical images, but finite element (FE) simulations can assess the primary stability of a bone-implant construct quantitatively based on high-resolution CT images. However, FE models lack experimental validation on clinically relevant bone anatomy. The aim of this study is to validate such an FE model on human jawbones. Forty-seven bone biopsies were extracted from human cadaveric jawbones. Dental implants of two sizes (Ø3.5 mm and Ø4.0 mm) were inserted and the constructs were subjected to a quasi-static bending-compression loading protocol. Those mechanical tests were replicated with sample-specific non-linear homogenized FE models. Bone was modeled with an elastoplastic constitutive law that included damage. Density-based material properties were mapped based on µCT images of the bone samples. The experimental ultimate load was better predicted by FE (R2 = 0.83) than by peri-implant bone density (R2 = 0.54). Unlike bone density, the simulations were also able to capture the effect of implant diameter. The primary stability of a dental implant in human jawbones can be predicted quantitatively with FE simulations. This method may be used for improving the design and insertion protocols of dental implants.

Autophagy Regulates Age-Related Jawbone Loss via LepR+ Stromal Cells.

Bone aging and decreased autophagic activity are related but poorly explored in the jawbone. This study aimed to characterize the aging jawbones and jawbone-derived stromal cells (JBSCs) and determine the role of autophagy in jawbone mass decline. We observed that the jawbones of older individuals and mice exhibited similar age-related bone loss. Furthermore, leptin receptor (LepR)-lineage cells served as the primary source for in vitro cultured and expanded JBSCs, referred to as LepR-Cre+/JBSCs. RNA-sequencing data from the jawbones and LepR-Cre+/JBSCs showed the upregulated expression of the phosphoinositide 3-kinase (PI3K)/protein kinase B (AKT)/mammalian target of rapamycin (mTOR) pathway during aging. Through single-cell transcriptomics, we identified a decrease in the proportion of osteogenic lineage cells and the activation of the PI3K/AKT pathway in LepR-lineage cells in aging bone tissues. Reduced basal autophagic activity, diminished autophagic flux, and decreased osteogenesis occurred in the jawbones and LepR-Cre+/JBSCs from older mice (O-mice; O-JBSCs). Pharmacologic and constitutive autophagy activation alleviated the impaired osteogenesis in O-JBSCs. In addition, the suppression of mTOR-induced autophagy improved the aging phenotype of O-JBSCs. The activation of autophagy in LepR-Cre+/JBSCs using chemical autophagic activators reduced the alveolar bone resorption in O-mice. Therefore, our study demonstrated that ATG molecules and pathways are crucial in jawbone aging, providing novel approaches to understanding age-related jawbone loss.

Study of the influence of macro-structure and micro-structure on the mechanical properties of stag beetle upper jaw.

Macrostructural control of stress distribution and microstructural influence on crack propagation is one of the strategies for obtaining high mechanical properties in stag beetle upper jaws. The maximum bending fracture force of the stag beetle upper jaw is approximately 154, 000 times the weight of the upper jaw. Here, we explore the macro and micro-structural characteristics of two stag beetle upper jaws and reveal the resulting differences in mechanical properties and enhancement mechanisms. At the macroscopic level, the elliptic and triangular cross-sections of the upper jaw of the two species of stag beetles have significant effects on the formation of cracks. The crack generated by the upper jaws with a triangular section grows slowly and deflects easily. At the microscopic level, the upper jaw of the two species is a chitin cross-layered structure, but the difference between the two adjacent fiber layers at 45° and 50° leads to different deflection paths of the cracks on the exoskeleton. The mechanical properties of the upper jaw of the two species of stag beetle were significantly different due to the interaction of macro-structure and micro-structure. In addition, a series of bionic samples with different cross-section geometries and different fiber cross angles were designed, and mechanical tests were carried out according to the macro-structure and micro-structure characteristics of the stag beetle upper jaw. The effects of cross-section geometry and fiber cross angle on the mechanical properties of bionic samples are compared and analyzed. This study provides new ideas for designing and optimizing highly loaded components in engineering. STATEMENT OF SIGNIFICANCE: The upper jaw of the stag beetle is composed of a complex arrangement of chitin and protein fibers, providing both rigidity and flexibility. This structure is designed to withstand various mechanical stresses, including impacts and bending forces, encountered during its burrowing activities and interactions with its environment. The study of the upper jaw of the stag beetle can provide an efficient structural design for engineering components that are subjected to high loads. Understanding the relationship between structure and mechanical properties in the stag beetle upper jaw holds significant implications for biomimetic design and engineering.

Accuracy and reliability for estimating jaw functional range of motion.

BACKGROUND: Three dimensional (3D) kinematic analysis based on motion capture can study synchronized data from the integrated jaw and neck motor system. Jaw function is commonly estimated on linear outcome variables of motion range. By combining jaw border movements in three planes the functional range of motion could be described by movement area and volume measures. RESEARCH QUESTION: Can we ensure the accuracy, test-retest reliability, and intra-individual variability with 3D kinematic analysis for estimating jaw functional range of motion (ROM), including jaw movement area and volume and jaw and head linear measures? METHODS: Accuracy was estimated by applying the method to a set of beakers with known volume, based on the percentage deviation and Pearson correlation coefficient between target and estimated values. Test-retest reliability was then analysed on maximum jaw movements performed in a pre-determined movement sequence by 17 pain-free participants (25.4 years ± 2.4) to estimate jaw functional ROM. Intraclass correlation coefficients (ICC) were calculated, and Bland-Altman plots were constructed. Coefficient of variation (CV) tested the within session reliability. RESULTS: The accuracy in volume and area measurements were high with a percentage deviation (0.03±0.59) and (1.2±0.45), respectively, with a strong linear relationship (R2=0.99) between target and estimated values. The test-retest reliability showed moderate to excellent reliability, and Bland-Altman plots showed good agreement. Overall, CVs showed high repeatability, but jaw movements in horizontal directions were less reliable and presented higher variability. SIGNIFICANCE: The study with 3D kinematic analysis of jaw functional ROM, provides a methodological basis for accurate and reliable measurements. The study presents a new way to estimate jaw functional ROM measures, useful for evaluation in clinical intervention, for instance in pain and jaw dysfunction. Moreover, the natural biological movement variability and the complexity of the interplay of jaw-head movement will be emphasised.

A multi-peak performance landscape for scale biting in an adaptive radiation of pupfishes.

The physical interactions between organisms and their environment ultimately shape diversification rates, but the contributions of biomechanics to evolutionary divergence are frequently overlooked. Here, we estimated a performance landscape for biting in an adaptive radiation of Cyprinodon pupfishes, including scale-biting and molluscivore specialists, and compared performance peaks with previous estimates of the fitness landscape in this system. We used high-speed video to film feeding strikes on gelatin cubes by scale eater, molluscivore, generalist and hybrid pupfishes and measured bite dimensions. We then measured five kinematic variables from 227 strikes using the SLEAP machine-learning model. We found a complex performance landscape with two distinct peaks best predicted gel-biting performance, corresponding to a significant non-linear interaction between peak gape and peak jaw protrusion. Only scale eaters and their hybrids were able to perform strikes within the highest performance peak, characterized by larger peak gapes and greater jaw protrusion. A performance valley separated this peak from a lower performance peak accessible to all species, characterized by smaller peak gapes and less jaw protrusion. However, most individuals exhibited substantial variation in strike kinematics and species could not be reliably distinguished by their strikes, indicating many-to-many mapping of morphology to performance. The two performance peaks observed in the lab were partially consistent with estimates of a two-peak fitness landscape measured in the wild, with the exception of the new performance peak for scale eaters. We thus reveal a new bimodal non-linear biomechanical model that connects morphology to performance to fitness in a sympatric radiation of trophic niche specialists.

Is immediate dental implant in fibula free flap beneficial for implant survival and osteoradionecrosis in jaw reconstruction?

OBJECTIVES: This study aimed to compare the risk of osteoradionecrosis and implant survival in oral cancer patients undergoing immediate dental implants during jaw reconstruction, termed "Jaw in a Day" (JIAD), with those receiving no implants or delayed implants (non-JIAD). PATIENTS & METHODS: Clinicopathologic data were collected from prospectively enrolled JIAD patients (n = 10, 29 implants) and retrospectively from non-JIAD patients (n = 117, 86 implants). Survival analyses were performed to assess implant survival and osteoradionecrosis-free survival. RESULTS: Osteoradionecrosis occurred in 0 % of JIAD cases compared to 19.3 % in non-JIAD cases without implants and 71.4 % in non-JIAD cases with delayed implants (p = 0.008). Osteoradionecrosis-free survival was significantly better in the JIAD group than the non-JIAD group (p = 0.0059). Implants in the JIAD group all survived regardless of radiation therapy (29/29, 100 %) and 95.1 % (58/61) of implants survived in delayed implants in non-irradiated fibula without radiotherapy. Meanwhile, only 11 of 25 implants placed in irradiated fibula flaps survived, even when the implants were placed after a median time interval of 624 days after radiotherapy, and none of them were earlier than 360 days. The survival analysis revealed a significant difference (p < 0.0001). CONCLUSION: JIAD appears to offer superior outcomes in terms of implant survival and osteoradionecrosis prevention compared to delayed implant placement. Placing implants in irradiated fibula, even after years, significantly poses high risk of implant failure and osteoradionecrosis. JIAD represents a promising approach for optimal rehabilitation, particularly in oral cancer patients requiring postoperative radiotherapy. Proper positioning and orientation of implants and flaps are crucial for implant survival.

Accuracy of a new photometric jaw tracking system in the frontal plane at different recording distances: An in-vitro study.

OBJECTIVES: To evaluate the accuracy of a new photometric jaw tracking system (JTS) in recording linear vertical movements in the frontal plane at different distances. METHODS: A mandibular plaster cast of a patient was placed on a simulation machine capable of linear movements along two spatial axes. Cyclops JTS (Itaka) was adapted to the plaster cast, while the head frame was attached to the simulation machine. The latter performed five linear movements from 20 to 40 mm in the y-axis; each movement was repeated five times at five different recording distance (380 to 420 mm). The recorded movements were measured and compared with those obtained with a laser Doppler vibrometer (LDV) for accuracy analysis. Data were statistically processed (α = 0.05). RESULTS: No statistically significant differences were found between Cyclops and LDV measurements on the y- and z-axes (p = 0.5). Changes in linear vertical motion and distance positions did not affect the accuracy, which remained relatively constant with similar trends and values less than 1 % for each parameter variation. The best condition observed was linear vertical movement of 30 mm at 420 mm (0.010 ± 0.023 mm). CONCLUSIONS: Cyclops has proven to be an accurate JTS in recording linear vertical movements in the frontal plane at different recording distances. For optimal recordings, the scanner should be placed as close as possible to the markers; excessive vertical movements decreased the accuracy. However, this study has limitations and requires in-vivo confirmations. CLINICAL SIGNIFICANCE: The tested JTS proved accurate in recording linear vertical movements in the frontal plane. However, given the limitations of the study, further investigation under real conditions is needed to support prosthetic and gnathological rehabilitations.

Autophagy regulates age-related delayed jawbone regeneration and decreased osteoblast osteogenesis by degrading FABP3.

The regenerative ability of limb bones after injury decreases during aging, but whether a similar phenomenon occurs in jawbones and whether autophagy plays a role in this process remain unclear. Through retrospective analysis of clinical data and studies on a mouse model of jawbone defects, we confirmed the presence of delayed or impaired bone regeneration in the jawbones of old individuals and mice. Subsequently, osteoblasts (OBs) derived from mouse jawbones were isolated, showing reduced osteogenesis in senescent osteoblasts (S-OBs). We observed a reduction in autophagy within both aged jawbones and S-OBs. Additionally, pharmacological inhibition of autophagy in normal OBs (N-OBs) led to cell aging and decreased osteogenesis, while autophagic activation reversed the aging phenotype of S-OBs. The activator rapamycin (RAPA) increased the autophagy level and bone regeneration in aged jawbones. Finally, we found that fatty acid-binding protein 3 (FABP3) was degraded by autolysosomes through its interaction with sequestosome 1 (P62/SQSTM1). Autophagy inhibition within senescent jawbones and S-OBs led to the excessive accumulation of FABP3, and FABP3 knockdown partially rescued the decreased osteogenesis in S-OBs and alleviated age-related compromised jawbone regeneration. In summary, we confirmed that autophagy inhibition plays an important role in delaying bone regeneration in aging jawbones. Autophagic activation or FABP3 knockdown can partially rescue the osteogenesis of S-OBs and the regeneration of aging jawbones, providing insight into jawbone aging.

Variations in dietary patterns of living sloths revealed by finite element analysis of jaws.

Although extinct sloths exhibited a wide range of dietary habits, modes of locomotion, and occupied various niches across the Americas, modern sloths are considered quite similar in their habits. The dietary habits of living sloths can be directly observed in the wild, and understanding the mechanical behavior of their jaws during chewing through finite element analysis (FEA) provides a valuable validation tool for comparative analysis with their extinct counterparts. In this study, we used FEA to simulate the mechanical behavior of sloth mandibles under lateral mastication loads, using it as a proxy for oral processing. Our research focused on the six extant sloth species to better understand their diets and validate the use of FEA for studying their extinct relatives. We found that all living sloths have the predominancy of low-stress areas in their mandibles but with significant differences. Choloepus didactylus had larger high-stress areas, which could be linked to a reduced need for processing tougher foods as an opportunistic generalist. Bradypus variegatus and Choloepus hoffmanni are shown to be similar, displaying large low-stress areas, indicating greater oral processing capacity in a seasonal and more competitive environment. Bradypus torquatus, Bradypus pygmaeus, and Bradypus tridactylus exhibited intermediary processing patterns, which can be linked to a stable food supply in more stable environments and a reduced requirement for extensive oral processing capacity. This study sheds light on extant sloths' dietary adaptations and has implications for understanding the ecological roles and evolutionary history of their extinct counterparts.

The effects of jaw clenching and mouthpiece use on bat swing velocity in Division II athletes.

Research assessing the effects of mouthpieces on an individual's aerobic, anaerobic, or muscular performance have attributed cited improvements to the participant's ability to jaw clench. Jaw clenching research finds positive outcomes with the task of jaw clenching with targeted muscle groups in a controlled laboratory setting. Thus, the study's goal was to determine if the addition of a mouthpiece would positively affect performance outcomes in a field-based whole-body muscle movement. Fourteen participants (8=F and 6=M) NCAA softball and baseball athletes completed 5 maximal bat swings with and without a mouthpiece in 4 conditions: no jaw clenching (NC), mouthpiece and jaw clenching (MP+C), mouthpiece only (MP), and jaw clenching only (C). Significant differences occurred in conditions, with the highest velocity noted in the combined condition of MP+C (71.9 mph) as compared to NC (67.9 mph), MP (68.6 mph), and C (70.9 mph). A repeated measures ANOVA demonstrated significant differences with bat swing velocity (F = 13.19, df 3, p < 0.0001). Pairwise comparisons revealed significant differences in MP+C with MP (p = 0.007); MP+C with NC (p = 0.001), and C with NC (p = 0.009). The results of this study provide evidence of jaw clenching's positive effects on the dynamic, whole-body explosive activity of a bat swing.

The effect of jaw suspension on cartilage strength in elasmobranchs.

The jaws and their supporting cartilages are tessellated in elasmobranchs and exhibit an abrupt increase in stiffness under compression. The major jaw-supporting cartilage, the hyomandibula, varies widely by shape and size and the extent of the load-bearing role is hypothesized to be inversely related to the number of craniopalatine articulations. Here, we test this hypothesis by evaluating the strength of the hyomandibular cartilage under compression in 13 species that represent all four jaw suspension systems in elasmobranchs (amphistyly, orbitostyly, hyostyly, and euhyostyly). The strength of the hyomandibular cartilages was measured directly using a material testing machine under compressive load, and indirectly by measuring morphological variables putatively associated with strength. The first measure of strength is force to yield (Fy), which was the peak force (N) exerted on the hyomandibula before plastic deformation. The second measure was compressive yield strength (σy, also called yield stress), which is calculated as peak force (N) before plastic deformation/cross-sectional area (mm2) of the specimen. Our results show that the load-bearing role of the hyomandibular cartilage, as measured by yield strength, is inversely related to the number of craniopalatine articulations, as predicted. Force to yield was lower for euhyostylic jaw suspensions and similar for the others. We also found that mineralization is associated with greater yield strength, while the second moment of area is associated with greater force to yield.