Multivariate brain-behaviour associations in psychiatric disorders.

Mapping brain-behaviour associations is paramount to understand and treat psychiatric disorders. Standard approaches involve investigating the association between one brain and one behavioural variable (univariate) or multiple variables against one brain/behaviour feature ('single' multivariate). Recently, large multimodal datasets have propelled a new wave of studies that leverage on 'doubly' multivariate approaches capable of parsing the multifaceted nature of both brain and behaviour simultaneously. Within this movement, canonical correlation analysis (CCA) and partial least squares (PLS) emerge as the most popular techniques. Both seek to capture shared information between brain and behaviour in the form of latent variables. We provide an overview of these methods, review the literature in psychiatric disorders, and discuss the main challenges from a predictive modelling perspective. We identified 39 studies across four diagnostic groups: attention deficit and hyperactive disorder (ADHD, k = 4, N = 569), autism spectrum disorders (ASD, k = 6, N = 1731), major depressive disorder (MDD, k = 5, N = 938), psychosis spectrum disorders (PSD, k = 13, N = 1150) and one transdiagnostic group (TD, k = 11, N = 5731). Most studies (67%) used CCA and focused on the association between either brain morphology, resting-state functional connectivity or fractional anisotropy against symptoms and/or cognition. There were three main findings. First, most diagnoses shared a link between clinical/cognitive symptoms and two brain measures, namely frontal morphology/brain activity and white matter association fibres (tracts between cortical areas in the same hemisphere). Second, typically less investigated behavioural variables in multivariate models such as physical health (e.g., BMI, drug use) and clinical history (e.g., childhood trauma) were identified as important features. Finally, most studies were at risk of bias due to low sample size/feature ratio and/or in-sample testing only. We highlight the importance of carefully mitigating these sources of bias with an exemplar application of CCA.

Multivariate curve resolution-based data fusion approaches applied in 1H NMR metabolomic analysis of healthy cohorts.

BACKGROUND: Metabolomics plays a critical role in deciphering metabolic alterations within individuals, demanding the use of sophisticated analytical methodologies to navigate its intricate complexity. While many studies focus on single biofluid types, simultaneous analysis of multiple matrices enhances understanding of complex biological mechanisms. Consequently, the development of data fusion methods enabling multiblock analysis becomes essential for comprehensive insights into metabolic dynamics. RESULTS: This study introduces a novel guideline for jointly analyzing diverse metabolomic datasets (serum, urine, metadata) with a focus on metabolic differences between groups within a healthy cohort. The guideline presents two fusion strategies, 'Low-Level data fusion' (LLDF) and 'Mid-Level data fusion' (MLDF), employing a sequential application of Multivariate Curve Resolution with Alternating Least Squares (MCR-ALS), linking the outcomes of successive analyses. MCR-ALS is a versatile method for analyzing mixed data, adaptable at various stages of data processing-encompassing resonance integration, data compression, and exploratory analysis. The LLDF and MLDF strategies were applied to 1H NMR spectral data extracted from urine and serum samples, coupled with biochemical metadata sourced from 145 healthy volunteers. SIGNIFICANCE: Both methodologies effectively integrated and analysed multiblock datasets, unveiling the inherent data structure and variables associated with discernible factors among healthy cohorts. While both approaches successfully detected sex-related differences, the MLDF strategy uniquely revealed components linked to age. By applying this analysis, we aim to enhance the interpretation of intricate biological mechanisms and uncover variations that may not be easily discernible through individual data analysis.

Benchtop NMR Coupled with Chemometrics: A Workflow for Unveiling Hidden Drug Ingredients in Honey-Based Supplements.

Recently, benchtop nuclear magnetic resonance (NMR) spectrometers utilizing permanent magnets have emerged as versatile tools with applications across various fields, including food and pharmaceuticals. Their efficacy is further enhanced when coupled with chemometric methods. This study presents an innovative approach to leveraging a compact benchtop NMR spectrometer coupled with chemometrics for screening honey-based food supplements adulterated with active pharmaceutical ingredients. Initially, fifty samples seized by French customs were analyzed using a 60 MHz benchtop spectrometer. The investigation unveiled the presence of tadalafil in 37 samples, sildenafil in 5 samples, and a combination of flibanserin with tadalafil in 1 sample. After conducting comprehensive qualitative and quantitative characterization of the samples, we propose a chemometric workflow to provide an efficient screening of honey samples using the NMR dataset. This pipeline, utilizing partial least squares discriminant analysis (PLS-DA) models, enables the classification of samples as either adulterated or non-adulterated, as well as the identification of the presence of tadalafil or sildenafil. Additionally, PLS regression models are employed to predict the quantitative content of these adulterants. Through blind analysis, this workflow allows for the detection and quantification of adulterants in these honey supplements.

Lipidomic studies revealing serological markers associated with the occurrence of retinopathy in type 2 diabetes.

PURPOSE: The duration of type 2 diabetes mellitus (T2DM) and blood glucose levels have a significant impact on the development of T2DM complications. However, currently known risk factors are not good predictors of the onset or progression of diabetic retinopathy (DR). Therefore, we aimed to investigate the differences in the serum lipid composition in patients with T2DM, without and with DR, and search for potential serological indicators associated with the development of DR. METHODS: A total of 622 patients with T2DM hospitalized in the Department of Endocrinology of the First Affiliated Hospital of Xi'an JiaoTong University were selected as the discovery set. One-to-one case-control matching was performed according to the traditional risk factors for DR (i.e., age, duration of diabetes, HbA1c level, and hypertension). All cases with comorbid chronic kidney disease were excluded to eliminate confounding factors. A total of 42 pairs were successfully matched. T2DM patients with DR (DR group) were the case group, and T2DM patients without DR (NDR group) served as control subjects. Ultra-performance liquid chromatography-mass spectrometry (LC-MS/MS) was used for untargeted lipidomics analysis on serum, and a partial least squares discriminant analysis (PLS-DA) model was established to screen differential lipid molecules based on variable importance in the projection (VIP) > 1. An additional 531 T2DM patients were selected as the validation set. Next, 1:1 propensity score matching (PSM) was performed for the traditional risk factors for DR, and a combined 95 pairings in the NDR and DR groups were successfully matched. The screened differential lipid molecules were validated by multiple reaction monitoring (MRM) quantification based on mass spectrometry. RESULTS: The discovery set showed no differences in traditional risk factors associated with the development of DR (i.e., age, disease duration, HbA1c, blood pressure, and glomerular filtration rate). In the DR group compared with the NDR group, the levels of three ceramides (Cer) and seven sphingomyelins (SM) were significantly lower, and one phosphatidylcholine (PC), two lysophosphatidylcholines (LPC), and two SMs were significantly higher. Furthermore, evaluation of these 15 differential lipid molecules in the validation sample set showed that three Cer and SM(d18:1/24:1) molecules were substantially lower in the DR group. After excluding other confounding factors (e.g., sex, BMI, lipid-lowering drug therapy, and lipid levels), multifactorial logistic regression analysis revealed that a lower abundance of two ceramides, i.e., Cer(d18:0/22:0) and Cer(d18:0/24:0), was an independent risk factor for the occurrence of DR in T2DM patients. CONCLUSION: Disturbances in lipid metabolism are closely associated with the occurrence of DR in patients with T2DM, especially in ceramides. Our study revealed for the first time that Cer(d18:0/22:0) and Cer(d18:0/24:0) might be potential serological markers for the diagnosis of DR occurrence in T2DM patients, providing new ideas for the early diagnosis of DR.

Irish Amyotrophic Lateral Sclerosis Incidence: Age, Period, and Cohort Effects Using a Partial Least Squares Regression Model.

BACKGROUND AND OBJECTIVES: To investigate the underlying reasons for variability in the incidence rate of amyotrophic lateral sclerosis (ALS) within the Irish population between the years 1996 and 2021. METHODS: The Irish ALS register was used to calculate the incidence and to subsequently extract age at diagnosis (age), year of diagnosis (period), and date of birth (cohort) for all incident patients within the study period (n = 2,771). An age-period-cohort (APC) model using partial least squares regression was constructed to examine each component separately and their respective contribution to the incidence while minimizing the well-known identifiability problem of APC effects. A dummy regression model consisting of 5 periods, 19 cohorts, and 16 age groups was used to examine nonlinear relationships within the data over time. The CIs for each of these were estimated using the jackknife method. RESULTS: The nonlinear model achieved R2 of 99.43% with 2-component extraction. Age variation was evident with those in the ages 65-79 years contributing significantly to the incidence (ßmax = 0.0746, SE = 0.000410, CI 0.00665-0.00826). However, those aged 25-60 years contributed significantly less (ßmin = -0.00393, SE = 0.000291, CI -0.00454 to -0.00340). Each successive period showed an increase in the regression model coefficient suggesting an increasing incidence over time, independent of the other factors examined-an increase of ß from -0.00489 (SE = 0.000264, CI -0.00541 to -0.00437) to 0.00973 (SE = 0.000418, CI 0.0105-0.00891). A cohort effect was demonstrated showing that the contribution of those born between 1927 and 1951 contributed to a significantly greater degree than the other birth cohorts (ßmax = 0.00577, SE = 0.000432, CI 0.00493-0.00662). DISCUSSION: Using the Irish population-based ALS Register, robust age, period, and cohort effects can be identified. The age effect may be accounted for by demographic shifts within the population. Changes in disease categorization, competing risks of death, and improved surveillance may account for period effects. The cohort effect may reflect lifestyle and environmental factors associated with the challenging economic circumstances in Ireland between 1927 and 1951. Age-period-cohort studies can help to account for changes in disease incidence and prevalence, providing additional insights into likely demographic and environmental factors that influence population-based disease risk.

Validation of Raman spectroscopic models to verify the origin of Australian beef grown under different production systems.

Verification of beef production systems and authentication of origin is becoming increasingly important as consumers base purchase decisions on a greater number of perceived values including the healthiness and environmental impact of products. Previously Raman spectroscopy has been explored as a tool to classify carcases from grass and grain fed cattle. Thus, the aim of the current study was to validate Partial Least Squares Discriminant Analysis (PLS-DA) models created using independent samples from carcases sampled from northern and southern Australian production systems in 2019, 2020 and 2021. Validation of the robustness of discrimination models was undertaken using spectral measures of fat from 585 carcases which were measured in 2022 using a Raman handheld device with a sample excised for fatty acid analysis. PLS-DA models were constructed and then employed to classify samples as either grass or grain fed in a two-class model. Overall, predictions were high with accuracies of up to 95.7% however, variation in the predictive ability was noted with models created for southern cattle yielding an accuracy of 73.2%. While some variation in fatty acids and therefore models can be attributed to differences in genetics, management and diet, the impact of duration of feeding is currently unknown and thus further work is warranted.

Exploration of circulating metabolic signature of erythrodermic psoriasis based on LC-MS metabolomics.

Erythrodermic psoriasis (EP) is a rare and life-threatening disease, the pathogenesis of which remains to be largely unknown. Metabolomics analysis can provide global information on disease pathophysiology, candidate biomarkers, and potential intervention strategies. To gain a better understanding of the mechanisms of EP and explore the serum metabolic signature of EP, we conducted an untargeted metabolomics analysis from 20 EP patients and 20 healthy controls. Furthermore, targeted metabolomics for focused metabolites were identified in the serum samples of 30 EP patients and 30 psoriasis vulgaris (PsV) patients. In the untargeted analysis, a total of 2992 molecular features were extracted from each sample, and the peak intensity of each feature was obtained. Principal component analysis (PCA), orthogonal partial least squares-discriminant analysis (OPLS-DA) revealed significant difference between groups. After screening, 98 metabolites were found to be significantly dysregulated in EP, including 67 down-regulated and 31 up-regulated. EP patients had lower levels of L-tryptophan, L-isoleucine, retinol, lysophosphatidylcholine (LPC), and higher levels of betaine and uric acid. KEGG analysis showed differential metabolites were enriched in amino acid metabolism and glycerophospholipid metabolism. The targeted metabolomics showed lower L-tryptophan in EP than PsV with significant difference and L-tryptophan levels were negatively correlated with the PASI scores. The serum metabolic signature of EP was discovered. Amino acid and glycerophospholipid metabolism were dysregulated in EP. The metabolite differences provide clues for pathogenesis of EP and they may provide insights for therapeutic interventions.

Comparison of hyperspectral imaging and spectrometers for prediction of cheeses composition.

Artisanal cheeses are part of the heritage and identity of different countries or regions. In this work, we investigated the spectral variability of a wide range of traditional Brazilian cheeses and compared the performance of different spectrometers to discriminate cheese types and predict compositional parameters. Spectra in the visible (vis) and near infrared (NIR) region were collected, using imaging (vis/NIR-HSI and NIR-HSI) and conventional (NIRS) spectrometers, and it was determined the chemical composition of seven types of cheeses produced in Brazil. Principal component analysis (PCA) showed that spectral variability in the vis/NIR spectrum is related to differences in color (yellowness index) and fat content, while in NIR there is a greater influence of productive steps and fat content. Partial least squares discriminant analysis (PLSDA) models based on spectral information showed greater accuracy than the model based on chemical composition to discriminate types of traditional Brazilian cheeses. Partial least squares (PLS) regression models based on vis/NIR-HSI, NIRS, NIR-HSI data and HSI spectroscopic data fusion (vis/NIR + NIR) demonstrated excellent performance to predict moisture content (RPD > 2.5), good ability to predict fat content (2.0 < RPD < 2.5) and can be used to discriminate between high and low protein values (∼1.5 < RPD < 2.0). The results obtained for imaging and conventional equipment are comparable and sufficiently accurate, so that both can be adapted to predict the chemical composition of the Brazilian traditional cheeses used in this study according to the needs of the industry.

LC-MS-based metabolomics reveals metabolite dynamic changes of beef after superchilling early post-mortem.

To explore the underlying mechanisms by which superchilling (SC, -3 °C within 5 h of slaughter) improves beef tenderness, an untargeted metabolomics strategy was employed. M. Longissimus lumborum (LL) muscles from twelve beef carcasses were assigned to either SC or very fast chilling (VFC, 0 °C within 5 h of slaughter) treatments, with conventional chilling (CC, 0 âˆ¼ 4 °C until 24 h post-mortem) serving as the control (6 per group). Biochemical properties and metabolites were investigated during the early post-mortem period. The results showed that the degradation of µ-calpain and caspase 3 occurred earlier in SC treated sample, which might be attributed to the accelerated accumulation of free Ca2+. The metabolomic profiles of samples from the SC and CC treatments were clearly distinguished based on partial least squares-discriminant analysis (PLS-DA) at each time point. It is noteworthy that more IMP and 4-hydroxyproline were found in the comparison between SC and CC treatments. According to the results of metabolic pathways analysis and the correlation analysis between traits related to tenderness and metabolites with significant differences (SC vs. CC), it can be suggested that the tenderization effect of the SC treatment may be related to the alteration of arginine and proline metabolism, and purine metabolism in the early post-mortem phase.

Application of a microfluidic electronic tongue based on impedance spectroscopy for coconut water analysis.

The food industry has grown with the demands for new products and their authentication, which has not been accompanied by the area of analysis and quality control, thus requiring novel process analytical technologies for food processes. An electronic tongue (e-tongue) is a multisensor system that can characterize complex liquids in a fast and simple way. Here, we tested the efficacy of an impedimetric microfluidic e-tongue setup - comprised by four interdigitated electrodes (IDE) on a printed circuit board (PCB), with four pairs of digits each, being one bare sensor and three coated with different ultrathin nanostructured films with different electrical properties - in the analysis of fresh and industrialized coconut water. Principal Component Analysis (PCA) was applied to observe sample differences, and Partial Least Squares Regression (PLSR) was used to predict sample physicochemical parameters. Linear Discriminant Analysis (LDA) and Partial Least Square - Discriminant Analysis (PLS-DA) were compared to classify samples based on data from the e-tongue device. Results indicate the potential application of the microfluidic e-tongue in the identification of coconut water composition and determination of physicochemical attributes, allowing for classification of samples according to soluble solid content (SSC) and total titratable acidity (TTA) with over 90% accuracy. It was also demonstrated that the microfluidic setup has potential application in the food industry for quality assessment of complex liquid samples.

Simulation study to evaluate when Plasmode simulation is superior to parametric simulation in estimating the mean squared error of the least squares estimator in linear regression.

Simulation is a crucial tool for the evaluation and comparison of statistical methods. How to design fair and neutral simulation studies is therefore of great interest for both researchers developing new methods and practitioners confronted with the choice of the most suitable method. The term simulation usually refers to parametric simulation, that is, computer experiments using artificial data made up of pseudo-random numbers. Plasmode simulation, that is, computer experiments using the combination of resampling feature data from a real-life dataset and generating the target variable with a known user-selected outcome-generating model, is an alternative that is often claimed to produce more realistic data. We compare parametric and Plasmode simulation for the example of estimating the mean squared error (MSE) of the least squares estimator (LSE) in linear regression. If the true underlying data-generating process (DGP) and the outcome-generating model (OGM) were known, parametric simulation would obviously be the best choice in terms of estimating the MSE well. However, in reality, both are usually unknown, so researchers have to make assumptions: in Plasmode simulation studies for the OGM, in parametric simulation for both DGP and OGM. Most likely, these assumptions do not exactly reflect the truth. Here, we aim to find out how assumptions deviating from the true DGP and the true OGM affect the performance of parametric and Plasmode simulations in the context of MSE estimation for the LSE and in which situations which simulation type is preferable. Our results suggest that the preferable simulation method depends on many factors, including the number of features, and on how and to what extent the assumptions of a parametric simulation differ from the true DGP. Also, the resampling strategy used for Plasmode influences the results. In particular, subsampling with a small sampling proportion can be recommended.

Deep learning framework for peak detection at the intact level of therapeutic proteins.

While automated peak detection functionalities are available in commercially accessible software, achieving optimal true positive rates frequently necessitates visual inspection and manual adjustments. In the initial phase of this study, hetero-variants (glycoforms) of a monoclonal antibody were distinguished using liquid chromatography-mass spectrometry, revealing discernible peaks at the intact level. To comprehensively identify each peak (hetero-variant) in the intact-level analysis, a deep learning approach utilizing convolutional neural networks (CNNs) was employed in the subsequent phase of the study. In the current case study, utilizing conventional software for peak identification, five peaks were detected using a 0.5 threshold, whereas seven peaks were identified using the CNN model. The model exhibited strong performance with a probability area under the curve (AUC) of 0.9949, surpassing that of partial least squares discriminant analysis (PLS-DA) (probability AUC of 0.8041), and locally weighted regression (LWR) (probability AUC of 0.6885) on the data acquired during experimentation in real-time. The AUC of the receiver operating characteristic curve also illustrated the superior performance of the CNN over PLS-DA and LWR.

Species discrimination from hair using ATR-FTIR spectroscopy: Application in wildlife forensics.

Hair is a commonly encountered trace evidence in wildlife crimes involving mammals and can be used for species identification which is essential for subsequent judicial proceedings. This proof of concept study aims, to distinguish the black guard hair of three wild cat species belonging to the genus Panthera i.e. Royal Bengal Tiger (Panthera tigris tigris), Indian Leopard (Panthera pardus fusca), and Snow Leopard (Panthera uncia) using a rapid and non-destructive ATR-FTIR spectroscopic technique in combination with chemometrics. A training dataset including 72 black guard hair samples of three species (24 samples from each species) was used to construct chemometric models. A PLS2-DA model successfully classified these three species into distinct classes with R-Square values of 0.9985 (calibration) and 0.8989 (validation). VIP score was also computed, and a new PLS2DA-V model was constructed using variables with a VIP score ≥ 1. External validation was performed using a validation dataset including 18 black guard hair samples (6 samples per species) to validate the constructed PLS2-DA model. It was observed that PLS2-DA model provides greater accuracy and precision compared to the PLS2DA-V model during cross-validation and external validation. The developed PLS2-DA model was also successful in differentiating human and non-human hair with R-Square values of 0.99 and 0.91 for calibration and validation, respectively. Apart from this, a blind test was also carried out using 10 unknown hair samples which were correctly classified into their respective classes providing 100 % accuracy. This study highlights the advantages of ATR-FTIR spectroscopy associated with PLS-DA for differentiation and identification of the Royal Bengal Tiger, Indian Leopard, and Snow Leopard hairs in a rapid, accurate, eco-friendly, and non-destructive way.

Near-infrared spectroscopy to quantify overall thermal process intensity during high-moisture extrusion of soy protein concentrate.

High-moisture extrusion (HME) is widely used to produce meat analogues. During HME the plant-based materials experience thermal and mechanical stresses. It is complicated to separate their effects on the final products because these effects are interrelated. In this study we hypothesize that the intensity of the thermal treatment can explain a large part of the physicochemical changes that occur during extrusion. For this reason, near-infrared (NIR) spectroscopy was used as a novel method to quantify the thermal process intensity during HME. High-temperature shear cell (HTSC) processing was used to create a partial least squares (PLS) regression curve for processing temperature under controlled processing conditions (root mean standard error of cross-validation (RMSECV) = 4.00 °C, coefficient of determination of cross-validation (R2CV) = 0.97). This PLS regression model was then applied to HME extrudates produced at different screw speeds (200-1200 rpm) and barrel temperatures (100-160 °C) with two different screw profiles to calculate the equivalent shear cell temperature as a measure for thermal process intensity. This equivalent shear cell temperature reflects the effects of changes in local temperature conditions, residence time and thermal stresses. Furthermore, it can be related to the degree of texturization of the extrudates. This information can be used to gain new insights into the effect of various process parameters during HME on the thermal process intensity and extrudate quality.

Distracted on duty: A theory-based exploration of influences leading to mobile phone distracted riding among food delivery workers.

Using mobile phones while riding is a form of distracted riding that significantly elevates crash risk. Regrettably, the factors contributing to mobile phone use while riding (MPUWR) among food delivery riders remain under-researched. Addressing this literature gap, the current study employs the Job Demands-Resources (JD-R) model and various socio-economic factors to examine the determinants of MPUWR. The research incorporates data from 558 delivery workers in Hanoi and Ho Chi Minh City, Vietnam. The study utilizes two analytical methods to empirically test the hypotheses, considering non-linear relationships between variables: Partial Least Square Structural Equation Modelling (PLS-SEM) and Artificial Neural Network (ANN). The results reveal mixed impacts of factors connected to job resources. Although social support appears to deter MPUWR, work autonomy and rewards seemingly encourage it. Furthermore, a predisposition towards risk-taking behaviour significantly impacts the frequency of mobile phone usage among delivery riders. Interestingly, riders with higher incomes and those who have previously been fined by the police exhibit more frequent mobile phone use. The findings of this study present valuable insights into the crucial factors to be addressed when designing interventions aimed at reducing phone use among food delivery riders.

Predictive computational models for assessing the impact of co-milling on drug dissolution.

Co-milling is an effective technique for improving dissolution rate limited absorption characteristics of poorly water-soluble drugs. However, there is a scarcity of models available to forecast the magnitude of dissolution rate improvement caused by co-milling. Therefore, this study endeavoured to quantitatively predict the increase in dissolution by co-milling based on drug properties. Using a biorelevant dissolution setup, a series of 29 structurally diverse and crystalline drugs were screened in co-milled and physically blended mixtures with Polyvinylpyrrolidone K25. Co-Milling Dissolution Ratios after 15 min (COMDR15 min) and 60 min (COMDR60 min) drug release were predicted by variable selection in the framework of a partial least squares (PLS) regression. The model forecasts the COMDR15 min (R2 = 0.82 and Q2 = 0.77) and COMDR60 min (R2 = 0.87 and Q2 = 0.84) with small differences in root mean square errors of training and test sets by selecting four drug properties. Based on three of these selected variables, applicable multiple linear regression equations were developed with a high predictive power of R2 = 0.83 (COMDR15 min) and R2 = 0.84 (COMDR60 min). The most influential predictor variable was the median drug particle size before milling, followed by the calculated drug logD6.5 value, the calculated molecular descriptor Kappa 3 and the apparent solubility of drugs after 24 h dissolution. The study demonstrates the feasibility of forecasting the dissolution rate improvements of poorly water-solube drugs through co-milling. These models can be applied as computational tools to guide formulation in early stage development.

Vis-NIR spectroscopic discriminant analysis of aflatoxin B1 excessive standard in peanut meal as feedstuff materials.

A fast, simple and reagent-free detection method for aflatoxin B1 (AFB1) is of great significance to food safety and human health. Visible and near-infrared (Vis-NIR) spectroscopy was applied to the discriminant analysis of AFB1 excessive standard of peanut meal as feedstuff materials. Two types of excessive standard discriminant models based on spectral quantitative analysis with partial least squares (PLS) and direct pattern recognition with partial least squares-discrimination analysis (PLS-DA) were established, respectively. Multi-parameter optimization of Norris derivative filtering (NDF) was used for spectral preprocessing; the two-stage wavelength screening method based on equidistant combination-wavelength step-by-step phase-out (EC-WSP) was used for wavelength optimization. A rigorous sample experimental design of calibration-prediction-validation was utilized. The calibration and prediction samples were used for modeling and parameter optimization, and the selected model was validated using the independent validation samples. For quantitative analysis-based, the positive, negative and total recognition-accuracy rates in validation (RARV+, RARV-, and RARV) were 84.8 %, 74.6 % and 79.8 %, respectively; but, the relative root mean square error of prediction was as high as 51.0 %. For pattern recognition-based, the RARV+, RARV-, and RARV were 93.3 %, 90.5 % and 91.9 %, respectively. Moreover, the number of wavelengths N was drastically reduced to 17, and the discrete wavelength combination was in NIR overtone frequency region. The results indicated that, the EC-WSP-PLS-DA model achieved significantly better discrimination effect. Thus demonstrated that Vis-NIR spectroscopy has feasibility for the excessive standard discrimination of aflatoxin B1 in feedstuff materials.

Cervical cancer biomarker screening based on Raman spectroscopy and multivariate statistical analysis.

Cervical cancer (CC) stands as one of the most prevalent malignancies among females, and the examination of serum tumor markers(TMs) assumes paramount significance in both its diagnosis and treatment. This research delves into the potential of combining Surface-Enhanced Raman Spectroscopy (SERS) with Multivariate Statistical Analysis (MSA) to diagnose cervical cancer, coupled with the identification of prospective serum biomarkers. Serum samples were collected from 95 CC patients and 81 healthy subjects, with subsequent MSA employed to analyze the spectral data. The outcomes underscore the superior efficacy of Partial Least Squares Discriminant Analysis (PLS-DA) within the MSA framework, achieving predictive accuracy of 97.73 %, and exhibiting sensitivities and specificities of 100 % and 95.83 % respectively. Additionally, the PLS-DA model yields a Variable Importance in Projection (VIP) list, which, when coupled with the biochemical information of characteristic peaks, can be utilized for the screening of biomarkers. Here, the Random Forest (RF) model is introduced to aid in biomarker screening. The two findings demonstrate that the principal contributing features distinguishing cervical cancer Raman spectra from those of healthy individuals are located at 482, 623, 722, 956, 1093, and 1656 cm-1, primarily linked to serum components such as DNA, tyrosine, adenine, valine, D-mannose, and amide I. Predictive models are constructed for individual biomolecules, generating ROC curves. Remarkably, D-mannose of V (C-N) exhibited the highest performance, boasting an AUC value of 0.979. This suggests its potential as a serum biomarker for distinguishing cervical cancer from healthy subjects.

Modeling and Optimization of an Enhanced Soft Sensor for the Fermentation Process of Pichia pastoris.

This paper proposes a novel soft sensor modeling approach, MIC-TCA-INGO-LSSVM, to address the decline in performance of soft sensor models during the fermentation process of Pichia pastoris, caused by changes in working conditions. Initially, the transfer component analysis (TCA) method is utilized to minimize the differences in data distribution across various working conditions. Subsequently, a least squares support vector machine (LSSVM) model is constructed using the dataset adapted by TCA, and strategies for improving the northern goshawk optimization (INGO) algorithm are proposed to optimize the parameters of the LSSVM model. Finally, to further enhance the model's generalization ability and prediction accuracy, considering the transfer of knowledge from multiple-source working conditions, a sub-model weighted ensemble scheme is proposed based on the maximum information coefficient (MIC) algorithm. The proposed soft sensor model is employed to predict cell and product concentrations during the fermentation process of Pichia pastoris. Simulation results indicate that the RMSE of the INGO-LSSVM model in predicting cell and product concentrations is reduced by 47.3% and 42.1%, respectively, compared to the NGO-LSSVM model. Additionally, TCA significantly enhances the model's adaptability when working conditions change. Moreover, the soft sensor model based on TCA and the MIC-weighted ensemble method achieves a reduction of 41.6% and 31.3% in the RMSE for predicting cell and product concentrations, respectively, compared to the single-source condition transfer model TCA-INGO-LSSVM. These results demonstrate the high reliability and predictive performance of the proposed soft sensor method under varying working conditions.

Sensor for Rapid In-Field Classification of Cannabis Samples Based on Near-Infrared Spectroscopy.

A rugged handheld sensor for rapid in-field classification of cannabis samples based on their THC content using ultra-compact near-infrared spectrometer technology is presented. The device is designed for use by the Austrian authorities to discriminate between legal and illegal cannabis samples directly at the place of intervention. Hence, the sensor allows direct measurement through commonly encountered transparent plastic packaging made from polypropylene or polyethylene without any sample preparation. The measurement time is below 20 s. Measured spectral data are evaluated using partial least squares discriminant analysis directly on the device's hardware, eliminating the need for internet connectivity for cloud computing. The classification result is visually indicated directly on the sensor via a colored LED. Validation of the sensor is performed on an independent data set acquired by non-expert users after a short introduction. Despite the challenging setting, the achieved classification accuracy is higher than 80%. Therefore, the handheld sensor has the potential to reduce the number of unnecessarily confiscated legal cannabis samples, which would lead to significant monetary savings for the authorities.