Adsorption and ion exchange of toxic metals by Brazilian clays: clay selection and studies of equilibrium, thermodynamics, and binary ion exchange modeling.

In this study, four Brazilian clays (Bofe, Verde-lodo, commercial Fluidgel, and expanded commercial vermiculite) were evaluated for their adsorptive capacity and removal percentage in relation to different toxic metals (Ni2+, Cd2+, Zn2+, and Cu2+). The best results were obtained by expanded vermiculite, with cadmium removal reaching values of 95%. The most promising clay was modified by the sodification process, and the metal cadmium was used to evaluate the ion exchange process. The clays expanded vermiculite (EV) and VNa-sodified vermiculite were evaluated by equilibrium study at 25, 35, and 45 °C. At 25 °C, EV obtained a maximum adsorption capacity of 0.368 mmol/g and sodified vermiculite 0.480 mmol/g, which represents an improvement of 30.4% in modified clay capacity. At 45 °C, the sodified vermiculite reached 0.970 mmol/g adsorption capacity. The Langmuir, Redlich-Peterson Freundlich, and Dubinin-Raduskevich models were adjusted to the results. Langmuir provided the best fit among the models. The thermodynamic quantities (ΔS, ΔH, and ΔG) demonstrated that the process is spontaneous and endothermic and the metal is captured by physisorption and chemisorption in the studied temperature range. For the ion exchange equilibrium, the binary Langmuir and binary Langmuir-Freundlich models were adjusted to the expanded vermiculite and sodified vermiculite isotherms, respectively. Both models were predictive. Thermal analysis indicated good heat resistance even after material modification. The apparent and real densities demonstrated that after each treatment or contamination, the clayey material undergoes contraction in its structure. An improved efficiency of the adsorbent was found after sodification.

Long-term performance: strength and metal encapsulation in alkali-activated iron ore tailings.

Understanding the strength behavior and leaching characteristics of mining tailings stabilized with alkali-activated cements in the short, medium, and long term is crucial for the feasibility of material applications. In this context, this study assessed the stabilization/solidification of iron ore tailings (IOT) using alkali-activated binder (AAB) composed of sugarcane bagasse ash and eggshell lime at curing times of 7, 28, 60, 90, 180, and 365 days. Additionally, leaching tests were conducted, along with the examination of possible changes in the chemical and mineralogical composition resulting from exposure to acidic environments. Tests included unconfined compression strength (UCS), leaching, X-ray diffraction, and Fourier-transform infrared spectroscopy for the IOT-AAB mixtures. The highest increase in UCS was observed between 7 and 60 days, reaching 6.47 MPa, with minimal variation thereafter. The AAB-bonded IOT exhibited no metal toxicity over time. Elements Ba, Mn, Pb, and Zn present in IOT and ash were encapsulated in the cemented matrix, with complete encapsulation of all metals observed from 90 days of curing time. The mineralogy of the stabilized/solidified tailings showed no changes resulting from leaching tests. Characteristic bands associated with the presence of N-A-S-H gel were identified in both pre-leaching and post-leaching samples for all curing times analyzed. Exposure to acidic environments altered bands related to carbonate bonds formed in the IOT-AAB mixture.

Rhodococcus erythropolis ATCC 4277 behavior against different metals and its potential use in waste biomining.

Rhodococcus erythropolis bacterium is known for its remarkable resistance characteristics that can be useful in several biotechnological processes, such as bioremediation. However, there is scarce knowledge concerning the behavior of this strain against different metals. This study sought to investigate the behavior of R. erythropolis ATCC 4277 against the residue of chalcopyrite and e-waste to verify both resistive capacities to the metals present in these residues and their potential use for biomining processes. These tests were carried out in a stirred tank bioreactor for 48 h, at 24ºC, pH 7.0, using a total volume of 2.0 L containing 2.5% (v/v) of a bacterial pre-culture. The pulp density of chalcopyrite was 5% (w/w), and agitation and oxygen flow rates were set to 250 rpm and 1.5 LO2 min-1, respectively. On the other hand, we utilized a waste of computer printed circuit board (WPCB) with a pulp density of 10% (w/w), agitation at 400 rpm, and an oxygen flow rate of 3.0 LO2 min-1. Metal concentration analyses post-fermentation showed that R. erythropolis ATCC 4277 was able to leach about 38% of the Cu present in the chalcopyrite residue (in ~ 24 h), and 49.5% of Fe, 42.3% of Ni, 27.4% of Al, and 15% Cu present in WPCB (in ~ 24 h). In addition, the strain survived well in the environment containing such metals, demonstrating the potential of using this bacterium for waste biomining processes as well as in other processes with these metals.

An N-terminal acidic ß-sheet domain is responsible for the metal-accumulation properties of amyloid-ß protofibrils: a molecular dynamics study.

The influence of metal ions on the structure of amyloid- ß (Aß) protofibril models was studied through molecular dynamics to explore the molecular mechanisms underlying metal-induced Aß aggregation relevant in Alzheimer's disease (AD). The models included 36-, 48-, and 188-mers of the Aß42 sequence and two disease-modifying variants. Primary structural effects were observed at the N-terminal domain, as it became susceptible to the presence of cations. Specially when ß-sheets predominate, this motif orients N-terminal acidic residues toward one single face of the ß-sheet, resulting in the formation of an acidic region that attracts cations from the media and promotes the folding of the N-terminal region, with implications in amyloid aggregation. The molecular phenotype of the protofibril models based on Aß variants shows that the AD-causative D7N mutation promotes the formation of N-terminal ß-sheets and accumulates more Zn2+, in contrast to the non-amyloidogenic rodent sequence that hinders the ß-sheets and is more selective for Na+ over Zn2+ cations. It is proposed that forming an acidic ß-sheet domain and accumulating cations is a plausible molecular mechanism connecting the elevated affinity and concentration of metals in Aß fibrils to their high content of ß-sheet structure at the N-terminal sequence.

Biochemical changes, metal content, and spectroscopic analysis in sewage sludge composted with lignocellulosic residue using FTIR-MIR and FTIR-NIR.

The use of lignocellulosic residues, originating from sawdust, in composting sewage sludge for organic fertilizer production, is a practice of growing interest. However, few studies have explored the effect of the proportion of sawdust and sewage sludge raw materials on composting performance in the humification process. This study assessed the addition of sawdust in the sewage sludge composting process, regarding carbon content, presence of heavy metals, and humification of the organic compost. The experimental design employed was a randomized complete block design with five treatments featuring different proportions of organic residues to achieve C/N ratios between 30-1 (T1: 100% sewage sludge and 0% sawdust, T2: 86% sewage sludge and 14.0% sawdust, T3: 67% sewage sludge and 33% sawdust, T4: 55% sewage sludge and 45% sawdust, and T5: 46.5% sewage sludge and 53.5% sawdust) and five replications, totaling 25 experimental units. The addition of lignocellulosic residue in sewage sludge composting increased the levels of TOC and the C/N ratio, reduced the levels of pH, P, N, Na, Ba, and Cr, and did not interfere with the levels of K, Ca, Mg, S, CEC, labile carbon, and metals Fe, Zn, Cu, Mn, Ni, and Pb. The increase in the proportion of sawdust residue favored the degradation of aliphatic groups, increasing the presence of aromatic structures and reducing humification at the end of composting. The use of sawdust as a lignocellulosic residue in sewage sludge composting is a viable and efficient alternative to produce high-quality organomineral fertilizers.

Dependence of n-Type Metal-Oxide Gas Sensor Response on the Pressure of Oxygen and Reducing Gases.

The adsorption of oxygen and its reaction with target gases are the basis of the gas detection mechanism by using metal oxides. Here, we present a theoretical analysis of the sensor response, within the ionosorption model, for an n-type polycrystalline semiconductor. Our goal of our work is to reveal the mechanisms of gas sensing from a fundamental point of view. We revisit the existing models in which the sensor response presents a power-law behavior with a reducing gas partial pressure. Then, we show, based on the Wolkenstein theory of chemisorption, that the sensor response depends not only on the reducing gas partial pressure but also on the oxygen partial pressure. We also find that the obtained sensor response does not explicitly depend on the grain size, and if it does, it is exclusively through the rate constants related to the involved reactions.

Metal Ions Can Modulate the Self-Assembly and Activity of Catalytic Peptide Amyloids.

Rational design of peptides has become a powerful tool to produce self-assembled nanostructures with the ability to catalyze different chemical reactions, paving the way to develop minimalistic enzyme-like nanomaterials. Catalytic amyloid-like assemblies have emerged among the most versatile and active, but they often require additional factors for activity. Elucidating how these factors influence the structure and activity is key for the design. Here, we showed that biologically relevant metal ions can guide and modulate the self-assembly of a small peptide into diverse amyloid architectures. The morphology and catalytic activity of the resulting fibrils were tuned by the specific metal ion decorating the surface, whereas X-ray structural analysis of the amyloids showed ion-dependent shape sizes. Molecular dynamics simulations showed that the metals can strongly affect the local conformational space, which can trigger major rearrangements of the fibrils. Our results demonstrate that the conformational landscape of catalytic amyloids is broad and tunable by external factors, which can be critical for future design strategies.

Recent progress and perspectives of metal organic frameworks (MOFs) for the detection of food contaminants.

Over the past decades, increasing research in metal-organic frameworks (MOFs) being a large family of highly tunable porous materials with intrinsic physical properties, show propitious results for a wide range of applications in adsorption, separation, electrocatalysis, and electrochemical sensors. MOFs have received substantial attention in electrochemical sensors owing to their large surface area, active metal sites, high chemical and thermal stability, and tunable structure with adjustable pore diameters. Benefiting from the superior properties, MOFs and MOF-derived carbon materials act as promising electrode material for the detection of food contaminants. Although several reviews have been reported based on MOF and its nanocomposites for the detection of food contaminants using various analytical methods such as spectrometric, chromatographic, and capillary electrophoresis. But there no significant review has been devoted to MOF/and its derived carbon-based electrodes using electrochemical detection of food contaminants. Here we review and classify MOF-based electrodes over the period between 2017 and 2022, concerning synthetic procedures, electrode fabrication process, and the possible mechanism for detection of the food contaminants which include: heavy metals, antibiotics, mycotoxins, and pesticide residues. The merits and demerits of MOF as electrode material and the need for the fabrication of MOF and its composites/derivatives for the determination of food contaminants are discussed in detail. At last, the current opportunities, key challenges, and prospects in MOF for the development of smart sensing devices for future research in this field are envisioned.

Selenosemicarbazone Metal Complexes as Potential Metal-based Drugs.

The discovery of the anticancer activity of cisplatin has marked the emergence of modern Inorganic Medicinal Chemistry. This field of research is concerned with the application of inorganic compounds to therapy or diagnosis of disease. In particular, metal coordination of bioactive ligands has gained recognition in drug design. The interaction between transition metal ions and the organic drugs could enhance their diagnostic and therapeutic potentials by improving the stability and/or bioavailability or by achieving a metal-drug synergism through a dual or multiple mechanisms of action. The isosteric replacement of sulfur by selenium in thiosemicarbazones leads to selenosemicarbazones. This class of compounds exhibits numerous biological activities like antitumor, antimicrobial, antiviral, etc. and, in most cases, they were more pronounced in comparison to the sulfur analogues. On the other hand, while the effect of transition metal complexation on the biological activity of thiosemicarbazones has been widely studied, the pharmacological activity of the corresponding metal-selenosemicarbazone compounds has been less explored. In this work, the most relevant results related to the selenosemicarbazone metal complexes as potential metal-based drugs have been reviewed.

Copper recovery through biohydrometallurgy route: chemical and physical characterization of magnetic (m), non-magnetic (nm) and mix samples from obsolete smartphones.

The more modern electronics are, the smaller and complex printed circuit boards are. Thus, these materials are continually changed (physicochemically), increasing the copper concentrations in smartphones. In this sense, it is challenging to set standardized recycling processes to improve metal recovery. In addition, biohydrometallurgy is a clean and cheap process to obtain critical metals from low-grade sources and waste electronic equipment. Therefore, the aim of this work was to characterize, physicochemically, 21 PCBs from smartphones manufactured from 2010 to 2015, and then to recover the copper by Acidithiobacillus ferrooxidans (biohydrometallurgy). The PCBs were comminuted and separated into Magnetic (M), Nonmagnetic (NM) and without magnetic separation (MIX) samples. It was identified 217.8; 560.3 and 401.3 mg Cu/g of PCBs for M, NM and MIX samples, respectively. Regarding biohydrometallurgy, the culture media iron-supplemented (NM + Fe and MIX + Fe) increased the copper content by 2.6 and 7.2%, respectively, and the magnetic separation step was insignificant.

Comparative investigation of Cu(II) complexes with dithiocarbazate: Structural design, theoretical calculation, and in vitro antitumor activity.

The present work reports the synthesis and investigation by semi-empirical Density Functional Theory (DFT), physical chemistry, and spectroscopic methods of two dithiocarbazates, 2-acetylpyridine-S-p-bromobenzyl-dithiocarbazate (HL1) and 2-acetylpyridine-S-p-nitrobenzyl-dithiocarbazate (HL2) and their Cu(II) complexes, [Cu(L1)Cl] (1), [Cu(L1)Br] (2), [Cu(L2)Cl] (3) and [Cu(L2)Br] (4). Single crystal X-ray analyzes showed distorted square planar geometry to the metal centers, which tridentate ligands coordinated by the NNS system and an additional halogen (Cl- or Br-) to complete the coordination sphere. Mass spectrometry data indicated the presence of [Cu(L1)(DMF)]+ and [Cu(L2)(DMF)]+, due to the exchanging of chloride/bromide ions and characteristic fragmentations of the compounds. The DFT composite method B97-3c was employed to optimize the geometries of ligands and complexes and IR spectra were calculated revealing good agreement with experimental data. Hydrogen bonds and π⋅⋅⋅π stacking interactions upon the molecular packing were investigated by Hirshfeld surface and fingerprint plots with the main interactions attributed to the H⋅⋅⋅H contacts. The biological activity of the dithiocarbazates and their Cu(II) complexes were evaluated in vitro against the human glioma U251 cells. Results revealed that the free dithiocarbazates present great in vitro antitumor activity that is increased after the complexation with copper. The measurement of cytotoxicity of the compounds showed biological activity in a low range of concentration, which indicates high efficiency as potential drugs.

GASS-Metal: identifying metal-binding sites on protein structures using genetic algorithms.

Metals are present in >30% of proteins found in nature and assist them to perform important biological functions, including storage, transport, signal transduction and enzymatic activity. Traditional and experimental techniques for metal-binding site prediction are usually costly and time-consuming, making computational tools that can assist in these predictions of significant importance. Here we present Genetic Active Site Search (GASS)-Metal, a new method for protein metal-binding site prediction. The method relies on a parallel genetic algorithm to find candidate metal-binding sites that are structurally similar to curated templates from M-CSA and MetalPDB. GASS-Metal was thoroughly validated using homologous proteins and conservative mutations of residues, showing a robust performance. The ability of GASS-Metal to identify metal-binding sites was also compared with state-of-the-art methods, outperforming similar methods and achieving an MCC of up to 0.57 and detecting up to 96.1% of the sites correctly. GASS-Metal is freely available at https://gassmetal.unifei.edu.br. The GASS-Metal source code is available at https://github.com/sandroizidoro/gassmetal-local.

Solid-State Preparation of Metal and Metal Oxides Nanostructures and Their Application in Environmental Remediation.

Nanomaterials have attracted much attention over the last decades due to their very different properties compared to those of bulk equivalents, such as a large surface-to-volume ratio, the size-dependent optical, physical, and magnetic properties. A number of solution fabrication methods have been developed for the synthesis of metal and metal oxides nanoparticles, but few solid-state methods have been reported. The application of nanostructured materials to electronic solid-state devices or to high-temperature technology requires, however, adequate solid-state methods for obtaining nanostructured materials. In this review, we discuss some of the main current methods of obtaining nanomaterials in solid state, and also we summarize the obtaining of nanomaterials using a new general method in solid state. This new solid-state method to prepare metals and metallic oxides nanostructures start with the preparation of the macromolecular complexes chitosan·Xn and PS-co-4-PVP·MXn as precursors (X = anion accompanying the cationic metal, n = is the subscript, which indicates the number of anions in the formula of the metal salt and PS-co-4-PVP = poly(styrene-co-4-vinylpyridine)). Then, the solid-state pyrolysis under air and at 800 °C affords nanoparticles of M°, MxOy depending on the nature of the metal. Metallic nanoparticles are obtained for noble metals such as Au, while the respective metal oxide is obtained for transition, representative, and lanthanide metals. Size and morphology depend on the nature of the polymer as well as on the spacing of the metals within the polymeric chain. Noticeably in the case of TiO2, anatase or rutile phases can be tuned by the nature of the Ti salts coordinated in the macromolecular polymer. A mechanism for the formation of nanoparticles is outlined on the basis of TG/DSC data. Some applications such as photocatalytic degradation of methylene by different metal oxides obtained by the presented solid-state method are also described. A brief review of the main solid-state methods to prepare nanoparticles is also outlined in the introduction. Some challenges to further development of these materials and methods are finally discussed.

Metallodrugs: an approach against invasion and metastasis in cancer treatment.

Cancer is a heterogeneous and multifactorial disease that causes high mortality throughout the world; therefore, finding the most effective therapies is a major research challenge. Currently, most anticancer drugs present a limited number of well-established targets, such as cell proliferation or death; however, it is important to consider that the worse progression of cancer toward pathological stages implies invasion and metastasis processes. Medicinal Inorganic Chemistry (MIC) is a young area that deals with the design, synthesis, characterization, preclinical evaluation, and mechanism of action of new inorganic compounds, called metallodrugs. The properties of metallic ions allow enriching of strategies for the design of new drugs, enabling the adjustment of physicochemical and stereochemical properties. Metallodrugs can adopt geometries, such as tetrahedral, octahedral, square planar, and square planar pyramid, which adjusts their arrangement and facilitates binding with a wide variety of targets. The redox properties of some metal ions can be modulated by the presence of the bound ligands to adjust their interaction, thereby opening a range of mechanisms of action. In this regard, the mechanisms of action that trigger the biological activity of metallodrugs have been generally identified by: (a) coordination of the metal to biomolecules (for instance, cisplatin binds to the N7 in DNA guanine, as Pt-N via coordination of the inhibition of enzymes); (b) redox-active; and (c) ROS production. For this reason, a series of metallodrugs can interact with several specific targets in the anti-invasive processes of cancer and can prevent metastasis. The structural base of several metal compounds shows great anticancer potential by inhibiting the signaling pathways related to cancer progression. In this minireview, we present the advances in the field of antimetastatic effects of metallodrugs.

A heterotrinuclear bioinspired coordination complex capable of binding to DNA and emulation of nuclease activity.

The investigation of compounds capable of strongly and selectively interacting with DNA comprises a field of research in constant development. In this work, we demonstrate that a trinuclear coordination complex based on a dinuclear Fe(III)Zn(II) core designed for biomimicry of the hydrolytic enzyme kidney bean purple acid phosphatase, containing an additional pendant arm coordinating a Pd(II) ion, has the ability to interact with DNA and to promote its hydrolytic cleavage. These results were found through analysis of plasmid DNA interaction and cleavage by the trinuclear complex 1 and its derivatives 2 and 3, in addition to the analysis of alteration in the DNA structure in the presence of the complexes through circular dichroism and DNA footprinting techniques. The suggested covalent interaction of the palladium-containing complex with DNA was analysed using an electrophoretic mobility assay, circular dichroism, high resolution gel separation techniques and kinetic analysis. This is a new and promising metal complex targeted to nucleic acids and acting in two separate ways: strong DNA interaction and hydrolytic cleavage.

Synthesis, characterization, and evaluation of antibacterial activity of transition metal oxyde nanoparticles.

Nanoparticles (NPs) have a wide range of applications in various areas. For health application, cytotoxicity tests are used to ensure its efficiency and safety. In this paper, ZnFe2O4, CoFe2O4, Zn0.5Co0.5Fe2O4 NPs were synthesized, characterized and their antibacterial properties were evaluated. The Sol-Gel method was used to synthesize the NPs. Their electronic and crystallographic structures were characterized by Fourier Transform Infrared Spectroscopy Analysis (FTIR), X-ray fluorescence (XRF), X-Ray Diffraction (XRD), and Transmission Electron Microscopy (TEM). To perform the antibacterial evaluation, ferrites were dispersed through nanoemulsion to prevent the crystals from accumulating together. Then the evaluation was performed through microdilution in a 96-well plate and diffusion in agar disc in contact with 3 different strains of Staphylococcus aureus and Escherichia coli. It demonstrated that the Sol-Gel method was efficient to synthesize NPs with suitable sizes for health application. All synthesized NPs showed the inhibition of bacterias with different concentrations used.

Benzodiazepines: Drugs with Chemical Skeletons Suitable for the Preparation of Metallacycles with Potential Pharmacological Activity.

The synthesis of organometallic compounds with potential pharmacological activity has attracted the attention of many research groups, aiming to take advantage of aspects that the presence of the metal-carbon bond can bring to the design of new pharmaceutical drugs. In this context, we have gathered studies reported in the literature in which psychoactive benzodiazepine drugs were used as ligands in the preparation of organometallic and metal complexes and provide details on some of their biological effects. We also highlight that most commonly known benzodiazepine-based drugs display molecular features that allow the preparation of metallacycles via C-H activation. These organometallic compounds merit further attention regarding their potential biological effects, not only in terms of psychoactive drugs but also in the search for drug replacements, for example, for cancer treatments.

Behavior of rat bone marrow stem cells on titanium surfaces modified by laser-beam and deposition of calcium phosphate.

OBJECTIVES: The aim of this study was to evaluate the behavior of rat bone marrow stem cells seeded on a Ti-15Mo alloy surface modified by laser-beam irradiation followed by calcium phosphate deposition. MATERIALS AND METHODS: A total of four groups were evaluated: polished commercially pure titanium (cpTi): Ti-P; laser irradiation + calcium phosphate deposition on cpTi: Ti-LCP; polished Ti-15Mo alloy: Ti15Mo-P; and laser irradiation + calcium phosphate deposition on Ti-15Mo alloy: Ti15Mo-LCP. Before and after laser irradiation and calcium phosphate deposition on the surfaces, physicochemical and morphological analyses were performed: Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDX). The wettability of the samples was evaluated by contact angle measurement. In addition, the behavior of osteoblast-like cells to these surfaces was evaluated for cell morphology, adhesion, proliferation and viability, evaluation of alkaline phosphatase formation and gene expression of osteogenesis markers. RESULTS: Surfaces wet-abrade with grit paper (P) showed oriented groves, while the laser irradiation and calcium phosphate deposition (LCP) produced porosity on both cpTi and Ti15Mo alloy groups with deposits of hydroxyapatite (HA) crystals (SEM). EDX showed no contamination after surface modification in both metal samples. A complete wetting was observed for both LCP groups, whereas P surfaces exhibited high degree of hydrophobicity. There was a statistical difference in the intragroup comparison of proliferation and viability (p < 0.05). The ALP activity showed higher values in the Ti15Mo alloy at 10 days of culture. The gene expression of bone related molecules did not present significant differences at 7 and 14 days among different metals and surface treatments. CONCLUSION: Ti15-Mo seems to be an alternative alloy to cpTi for dental implants. Surface treatment by laser irradiation followed by phosphate deposition seems to positively interact with bone cells. CLINICAL RELEVANCE: Ti-15Mo alloy surface modified by laser-beam irradiation followed by calcium phosphate deposition may improve and accelerate the osseointegration process of dental implants.

Zn(ferulate)-LSH Systems as Multifunctional Filters.

Excessive UV solar radiation exposure causes human health risks; therefore, the study of multifunctional filters is important to skin UV protective ability and also to other beneficial activities to the human organism, such as reduction of reactive oxygen species (ROS) responsible for cellular damages. Potential multifunctional filters were obtained by intercalating of ferulate anions into layered simple metal hydroxides (LSH) through anion exchange and precipitation at constant pH methods. Ultrasound treatment was used in order to investigate the structural changes in LSH-ferulate materials. Structural and spectroscopic analyses show the formation of layered materials composed by a mixture of LSH intercalated with ferulate anions, where carboxylate groups of ferulate species interact with LSH layers. UV-VIS absorption spectra and in vitro SPF measurements indicate that LSH-ferulate systems have UV shielding capacity, mainly UVB protection. The results of reactive species assays show the ability of layered compounds in capture DPPH•, ABTS•+, ROO•, and HOCl/OCl- reactive species. LSH-ferulate materials exhibit antioxidant activity and singular optical properties that enable their use as multifunctional filters.

Oral health, organic and inorganic saliva composition of men with Schizophrenia: Case-control study.

BACKGROUND: Schizophrenia (SCZ) presents complex challenges related to diagnosis and clinical monitoring. The study of conditions associated with SCZ can be facilitated by using potential markers and patterns that provide information to support the diagnosis and oral health. METHODS: The salivary composition of patients diagnosed with SCZ (n = 50) was evaluated and compared to the control (n = 50). Saliva samples from male patients were collected and clinical parameters were evaluated. The concentration of total proteins and amylase were determined and salivary macro- and microelements were quantified by ICP OES and ICP-MS. Exploratory data analysis based on artificial intelligence tools was used in the investigation. RESULTS: There was a significant increase in the salivary concentrations of Al, Fe, Li, Mg, Na, and V, higher prevalence of caries (p < 0.001), periodontal disease (p < 0.001), and reduced salivary flow rate (p = 0.019) in SCZ patients. Also, samples were grouped into six clusters. As, Co, Cr, Cu, Mn, Mo, Ni, Se, and Sr were correlated with each other, while Fe, K, Li, Ti, and V showed the highest concentrations in the samples distributed in the clusters with the highest association between SZC patients and controls. CONCLUSIONS: The results obtained indicate changes in salivary flow, organic composition, and levels of macro- and microelements in SCZ patients. Salivary concentrations of Fe, Mg, and Na may be related to oral conditions, higher prevalence of caries, and periodontal disease. The exploratory analysis showed different patterns in the salivary composition of SCZ patients impacted by associations between oral health conditions and the use of medications. Future studies are encouraged to confirm the results investigated in this study.