Development of Rapid Disk Diffusion Device Using Laser Speckle Formation Technology for Rapid Antimicrobial Susceptibility Testing.

The escalation of antimicrobial resistance (AMR) due to the excessive and inappropriate use of antimicrobials has prompted the urgent need for more rapid and effective antimicrobial susceptibility testing (AST) methods. Conventional AST techniques often take 16-24 h, leading to empirical prescription practices and the potential emergence of AMR. The study aimed to develop a rapid disk diffusion (RDD) method utilizing laser speckle formation (LSF) technology to expedite AST results. The study aimed to evaluate the performance of LSF technology in determining antimicrobial susceptibility. In this study, preclinical and clinical settings were established to compare the LSF technology with conventional disk diffusion (DD) methods to measure the inhibition zones. Preclinical experiments with different bacterial strains demonstrated more than 70% categorical agreement (CA) against most antimicrobials. Further, clinical experiments with multiple strains and antibiotics revealed CA ranging from 40 to 79%, while major and minor discrepancies were observed around 30% and 11%, respectively. These observations revealed high concordance between RDD and DD for multiple antimicrobials in multiple species. The results underscore the potential of RDD-based LSF technology for hastening AST procedures. The current study is marked by a unique equipment setup and analysis approach. Collectively, the suggested laser-based RDD showed greater potential than previously developed comparable methods. The proposed method and design have a higher application potential than formerly developed similar technologies. Together, the study contributes to the ongoing development of rapid AST methods.

Bacteriuria and phenotypic antimicrobial susceptibility testing in 45 min by point-of-care Sysmex PA-100 System: first clinical evaluation.

PURPOSE: This study compared the results of the new Sysmex PA-100 AST System, a point-of-care analyser, with routine microbiology for the detection of urinary tract infections (UTI) and performance of antimicrobial susceptibility tests (AST) directly from urine. METHODS: Native urine samples from 278 female patients with suspected uncomplicated UTI were tested in the Sysmex PA-100 and with reference methods of routine microbiology: urine culture for bacteriuria and disc diffusion for AST. RESULTS: The analyser delivered bacteriuria results in 15 min and AST results within 45 min. Sensitivity and specificity for detection of microbiologically confirmed bacteriuria were 84.0% (89/106; 95% CI: 75.6-90.4%) and 99.4% (155/156; 95% CI: 96.5-100%), respectively, for bacterial species within the analyser specifications. These are Escherichia coli, Klebsiella pneumoniae, Proteus mirabilis, Enterococcus faecalis and Staphylococcus saprophyticus, which are common species causing uncomplicated UTI. Overall categorical agreement (OCA) for AST results for the five antimicrobials tested in the Sysmex PA-100 (amoxicillin/clavulanic acid, ciprofloxacin, fosfomycin, nitrofurantoin and trimethoprim) ranged from 85.4% (70/82; 95%CI: 75.9-92.2%) for ciprofloxacin to 96.4% (81/84; 95% CI: 89.9-99.3%) for trimethoprim. The Sysmex PA-100 provided an optimal treatment recommendation in 218/278 cases (78.4%), against 162/278 (58.3%) of clinical decisions. CONCLUSION: This first clinical evaluation of the Sysmex PA-100 in a near-patient setting demonstrated that the analyser delivers phenotypic AST results within 45 min, which could enable rapid initiation of the correct targeted treatment with no further adjustment needed. The Sysmex PA-100 has the potential to significantly reduce ineffective or unnecessary antibiotic prescription in patients with UTI symptoms.

A multisite validation of a two hours antibiotic susceptibility flow cytometry assay directly from positive blood cultures.

BACKGROUND: Rapid antimicrobial susceptibility testing (AST) is urgently needed to provide safer treatment to counteract antimicrobial resistance. This is critical in septic patients, because resistance increases empiric therapy uncertainty and the risk of a poor outcome. We validate a novel 2h flow cytometry AST assay directly from positive blood cultures (PBC) by using a room temperature stable FASTgramneg and FASTgrampos kits (FASTinov® Porto, Portugal) in three sites: FASTinov (site-1), Hospital Ramon y Cajal, Madrid, Spain (site-2) and Centro Hospitalar S. João, Porto, Portugal (site-3). A total of 670 PBC were included: 333 spiked (site-1) and 337 clinical PBC (151 site-2 and 186 site-3): 367 gram-negative and 303 gram-positive. Manufacturer instructions were followed for sample preparation, panel inoculation, incubation (1h/37ºC) and flow cytometry analysis using CytoFlex (Site-1 and -2) or DxFlex (site-3) both instruments from Beckman-Coulter, USA. RESULTS: A proprietary software (bioFAST) was used to immediately generate a susceptibility report in less than 2 h. In parallel, samples were processed according to reference AST methods (disk diffusion and/or microdilution) and interpreted with EUCAST and CLSI criteria. Additionally, ten samples were spiked in all sites for inter-laboratory reproducibility. Sensitivity and specificity were >95% for all antimicrobials. Reproducibility was 96.8%/95.0% for FASTgramneg and 95.1%/95.1% for FASTgrampos regarding EUCAST/CLSI criteria, respectively. CONCLUSION: FASTinov® kits consistently provide ultra-rapid AST in 2h with high accuracy and reproducibility on both Gram-negative and Gram-positive bacteria. This technology creates a new paradigm in bacterial infection management and holds the potential to significantly impact septic patient outcomes and antimicrobial stewardship.

A Thermoplastic Microsystem to Perform Antibiotic Susceptibility Testing by Monitoring Oxygen Consumption.

Antibiotic susceptibility testing (AST) is a routine procedure in diagnostic laboratories to determine pathogen resistance profiles toward antibiotics. The need for fast and accurate resistance results is rapidly increasing with a global rise in pathogen antibiotic resistance over the past years. Microfluidic technologies can enable AST with lower volumes, lower cell numbers, and a reduction in the sample-to-result time compared to state-of-the-art systems. We present a protocol to perform AST on a miniaturized nanoliter chamber array platform. The chambers are filled with antibiotic compounds and oxygen-sensing nanoprobes that serve as a viability indicator. The growth of bacterial cells in the presence of different concentrations of antibiotics is monitored; living cells consume oxygen, which can be observed as an increase of a luminesce signal within the growth chambers. Here, we demonstrate the technique using a quality control Escherichia coli strain, ATCC 35218. The AST requires 20 µL of a diluted bacterial suspension (OD600 = 0.02) and provides resistance profiles about 2-3 h after the inoculation. The microfluidic method can be adapted to other aerobic pathogens and is of particular interest for slow-growing strains.

Combining deep learning and droplet microfluidics for rapid and label-free antimicrobial susceptibility testing of colistin.

Efficient tools for rapid antibiotic susceptibility testing (AST) are crucial for appropriate use of antibiotics, especially colistin, which is now often considered a last resort therapy with extremely drug resistant Gram-negative bacteria. Here, we developed a rapid, easy and miniaturized colistin susceptibility assay based on microfluidics, which allows for culture and high-throughput analysis of bacterial samples. Specifically, a simple microfluidic platform that can easily be operated was designed to encapsulate bacteria in nanoliter droplets and perform a fast and automated bacterial growth detection in 2 h, using standardized samples. Direct bright-field imaging of compartmentalized samples proved to be a faster and more accurate detection method as compared to fluorescence-based analysis. A deep learning powered approach was implemented for the sensitive detection of the growth of several strains in droplets. The DropDeepL AST method (Droplet and Deep learning-based method for AST) developed here allowed the determination of the colistin susceptibility profiles of 21 fast-growing Enterobacterales (E. coli and K. pneumoniae), including clinical isolates with different resistance mechanisms, showing 100 % categorical agreement with the reference broth microdilution (BMD) method performed simultaneously. Direct AST of bacteria in urine samples on chip also provided accurate results in 2 h, without the need of complex sample preparation procedures. This method can easily be implemented in clinical microbiology laboratories, and has the potential to be adapted to a variety of antibiotics, especially for last-line antibiotics to optimize treatment of patients infected with multi-drug resistant strains.

Propyl (E)-3-(furan-2-yl) Acrylate: a synthetic antifungal potential with a regulatory effect on the biosynthesis of ergosterol in Candida Albicans

Abstract The genus Candida represents the main cause of infections of fungal origin. Some species stand out as disease promoters in humans, such as C. albicans, C. glabrata, C. parapsilosis, and C. tropicalis. This study evaluated the antifungal effects of propyl (E)-3-(furan-2-yl) acrylate. The minimum inhibitory concentration of the synthetic compound, amphotericin B and fluconazole alone against four species of Candida ranged from 64 to 512 µg/mL, 1 to 2 µg/mL, and 32 to 256 µg/mL, respectively. The synergistic effect of the test substance was observed when associated with fluconazole against C. glabrata, there was no antagonism between the substances against any of the tested strains. The potential drug promoted morphological changes in C. albicans, decreasing the amount of resistance, virulence, and reproduction structures, such as the formation of pseudohyphae, blastoconidia, and chlamydospores, ensuring the antifungal potential of this substance. It was also possible to identify the fungicidal profile of the test substance through the study of the growth kinetics of C. albicans. Finally, it was observed that the test compound inhibited the ergosterol biosynthesis by yeast

Chemical composition and biological activity of Baccharis erioclada DC. essential oil

Abstract The chemically complex essential oils of Baccharis species are associated with several biological activities, such as antimicrobial and antiulcerous properties. However, few studies have investigated Baccharis erioclada DC. Therefore, in this study, we aimed to characterize the essential oil of B. erioclada and evaluate its antioxidant, antimicrobial, and hemolytic potential. The essential oil was extracted by hydrodistillation using a Clevenger apparatus and analyzed via gas chromatography-mass spectrometry (GC-MS). Phosphomolybdenum complex formation, reducing antioxidant power, and thiobarbituric acid reactive substances (TBARS) methods were used to determine antioxidant potential. To evaluate the essential oil's antimicrobial activity, minimum inhibitory concentrations (MIC) in Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans were calculated. Hemolytic activity was determined in sheep red blood cells. Thirty-one compounds were identified via GC-MS analysis, representing 81.60% of the total essential oil. These compounds included: turmerone (27.97%), fokienol (13.47%), ledol (9.78%), and santalol (5.35%). The class of compounds identified was the oxygenated sesquiterpenes (62.52%). Antioxidant activity was confirmed via phosphomolybdenum complex formation and TBARS methods. Moderate antimicrobial activity and low hemolysis rates were displayed at concentrations of 250 and 500 µg/mL

The chemical composition and antibacterial activity of a methanolic extract of Satureja khuzistanica

Abstract In the present study, the metabolite profiling of methanolic extract from aerial parts of Satureja khuzistanica Jamzad, as an endemic medicinal plant from Iran, was evaluated using HPLC-PDA-ESI. Then, the main compound from the extract was isolated and purified by using extensive chromatographic techniques. In addition, the structure of the isolated compounds was elucidated using 1D, 2D NMR, and MS spectrometry, upon which 22 compounds were identified. The antibacterial activity of diosmetin 7-rutinoside (6) and linarin (13) in combination with carvacrol as a major compound of the essential oil was tested against Pseudomonas aeruginosa and Staphylococcus aureus through disc diffusion and minimum inhibitory concentration methods. The results indicated that the linarin, when mixed with carvacrol as the main compounds in the essential oil of the plant, has a satisfactory activity against both Pseudomonas aeruginosa and Staphylococcus aureus with MIC values of 0.16 and 0.18 µg/mL, respectively. Further, the fractional inhibitory concentration (FIC) index indicated that this compound had synergism with carvacrol.

Antibacterial effect of isoeugenol against Pseudomonas aeruginosa

Abatsract Pseudomonas aeruginosa is an important nosocomial pathogen and its clinical importance is mainly related to nosocomial infections. Increased rates of bacterial resistance in recent years has led WHO to publish a global priority list to guide research and discovery of new antibiotics, where P. aeruginosa is among the group of bacteria for which there is a critical level of priority for new drugs to be discovered. In this context, isoeugenol appears as an interesting alternative and the objective of this study was to investigate its action against P. aeruginosa. Isoeugenol presented significant antibacterial activity, with minimum inhibitory concentration (MIC) of 64µg/mL and minimum bactericidal concentration (MBC) of 128µg/mL, and was considered bactericidal against this species. Molecular docking revealed interactions that suggest that isoeugenol may bind to the enzyme Penicillin-Binding Protein 3 and interfere with the bacterial cell wall synthesis process. This study reinforces the antibacterial potential of this compound and emphasizes that more studies are needed in order to better investigate its mechanism of antibacterial action.

Antifungal activity of silver nanoparticles and clotrimazole against Candida spp

Abstract The aim of present study was calculate the Minimum inhibitory concentrations (MICs) of silver nanoparticles and clotrimazole for Candida species and their interaction by the adaptation of standarized methods. The MICs values of clotrimazole were 9 E-04-3 E-03 ug/ml, 0.1-0.6 ug/ml, 3 E-03- 0.1 ug/ml and 3 E-03-0.3 ug/ml for Candida albicans susceptible to fluconazole, Candida albicans resistance to fluconazole, Candida krusei and Candida parapsilosis respectively. The MICs values of silver nanoparticles were 26.50- 53 ug/ml; 26.50-106 ug/ml; 106-212 ug/ ml and 26.50- 53 ug/ml for Candida albicans susceptible to fluconazole, Candida albicans resistance to fluconazole, Candida krusei and Candida parapsilosis respectively. Synergism between clotrimazole and silver nanoparticles was measured by checkerboard BMD (broth microdilution) test and shown only for C. albicans susceptible to fluconazole because the fractional inhibitory concentrations (FICs) values were 0.07 - 0.15 ug/ml. Indifference was shown for the other species tested because the FICs values were between 0.5 - 2- 3.06 ug/ml. The results suggest synergistic activity depending on the fungus species analysed, however we recommend the incorporation of others measurement methodologies to confirm our results. As for measurement methodologies of MICs of silver nanoparticles and clotrimazole international normative were respected to guarantee reproducible and comparable results.

Coagulase-negative staphylococci isolates from blood cultures of newborns in a tertiary hospital in southern Brazil

Abstract Neonatal sepsis continues to be a major cause of morbidity and mortality worldwide. Coagulase-negative staphylococci (CoNS), commonly found on the skin, being the main agents isolated. The aim of this study was to evaluate CoNS isolated from blood cultures of newborn (NB) infants. The study took place between 2014 and 2016/2017 in a tertiary hospital in southern Brazil. Using the VITEK 2 system (bioMérieux, Marcy l'Etoile, France), the microorganisms were identified and had their sensitivity profiles determined. The minimum inhibitory concentrations of linezolid, tigecycline, and vancomycin were also determined. The clinical parameters and mortality rates of NBs were evaluated. From January to December 2014, 176 CoNS isolates were obtained from 131 patients and from June 2016 to July 2017, 120 CoNS isolates were obtained from 79 patients. Staphylococcus epidermidis was most prevalent in both periods. Resistance rates increased between 2014 and 2016/2017, especially against ciprofloxacin (52.27% and 73.11%, p = 0.0004), erythromycin (51.40% and 68.07%, p = 0.0054), gentamicin (50.59% and 67.23%, p = 0.0052), and penicillin (71.3% and 99.17%, p = 0.0001), respectively. With 100% susceptibility to linezolid, tigecycline, and vancomycin in both periods and methodologies tested. In 2014, 53.44% of the NBs received antibiotic therapy, and of these, 77.14% used a catheter; in 2016/2017, these were 78.48% and 95.16%, respectively. Regarding laboratory tests, a hemogram was ineffective, since patients with sepsis presented normal reference values. In 2014 and 2016/17, 15.71% and 17.74% of the NBs died, respectively. S. epidermidis was the predominant microorganism, related to catheter use in most cases. The resistance rates have increased over time, demonstrating the importance of adopting control and prevention measures in this hospital. CoNS are responsible for a significant neonatal sepsis mortality rate in infants.

Synergy in penicillin, cephalosporin, amphenicols, and aminoglycoside against MDR S. aureus isolated from Camel milk

Abstract This study investigated the synergy testing of penicillin, cephalosporin, amphenicols, and aminoglycoside in the camel milk (n=768 samples), subsequently used for isolation of MDR S. aureus targeting mecA gene. Antibiotic susceptibility of S. aureus showed >90% isolates were sensitive to ciprofloxacin and trimethoprim and resistant against oxacillin, ampicillin, and cefoxitin. Further, 50-85% of the S. aureus were sensitive to gentamicin, oxytetracycline, and chloramphenicol and resistant against cefotaxime, vancomycin, and cefixime. Minimum inhibitory concentration (MIC) of cefotaxime, (C) and ampicillin (A) in combination with gentamicin (G) was reduced by 99.34% and 70.46%, respectively, while with chloramphenicol (Ch), reduction was 57.49% and 60%, respectively. In addition, the Fractional Inhibitory Concentration Index (FICI) of G+A, Ch+C and Ch+G combinations showed synergy against 80%, 60%, and 30% of MDR S. aureus, respectively. Similarly, C+A and Ch+G displayed indifferent interaction against 70 % and 30% of isolates, respectively, while the later showed additive interaction against 10% of MDR S. aureus. Altogether, our results described effective combination of gentamicin and chloramphenicol with ampicillin and cefotaxime to combat MDR S. aureus

Validation of Selective Agars for Detection and Quantification of Escherichia coli Strains Resistant to Critically Important Antimicrobials.

Success in the global fight against antimicrobial resistance (AMR) is likely to improve if surveillance can be performed on an epidemiological scale. An approach based on agars with incorporated antimicrobials has enormous potential to achieve this. However, there is a need to identify the combinations of selective agars and key antimicrobials yielding the most accurate counts of susceptible and resistant organisms. A series of experiments involving 1,202 plates identified the best candidate combinations from six commercially available agars and five antimicrobials, using 18 Escherichia coli strains as either pure cultures or inocula-spiked feces. The effects of various design factors on colony counts were analyzed in generalized linear models. Without antimicrobials, Brilliance E. coli and CHROMagar ECC agars yielded 28.9% and 23.5% more colonies, respectively, than MacConkey agar. The order of superiority of agars remained unchanged when fecal samples with or without spiking of resistant E. coli strains were inoculated onto agars with or without specific antimicrobials. When antimicrobials were incorporated at various concentrations, it was revealed that ampicillin, tetracycline, and ciprofloxacin were suitable for incorporation into Brilliance and CHROMagar agars at all defined concentrations. Gentamicin was suitable for incorporation only at 8 and 16 µg/ml, while ceftiofur was suitable only at 1 µg/ml. CHROMagar extended-spectrum ß-lactamase (ESBL) agar supported growth of a wider diversity of extended-spectrum-cephalosporin-resistant E. coli strains. The findings demonstrate the potential for agars with incorporated antimicrobials to be combined with laboratory-based robotics to deliver AMR surveillance on a vast scale with greater sensitivity of detection and strategic relevance. IMPORTANCE Established models of surveillance for AMR in livestock typically have a low sampling intensity, which creates a tremendous barrier to understanding the variation of resistance among animal and food enterprises. However, developments in laboratory robotics now make it possible to rapidly and affordably process large volumes of samples. Combined with modern selective agars incorporating antimicrobials, this forms the basis of a novel surveillance process for identifying resistant bacteria by chromogenic reactions, including accurately detecting and quantifying the presence of bacteria even when they are present at low concentrations. Because Escherichia coli is a widely preferred indicator bacterium for AMR surveillance, this study identifies the optimal selective agar for quantifying resistant E. coli strains by assessing the growth performance on agars with antimicrobials. The findings are the first step toward exploiting laboratory robotics in an up-scaled approach to AMR surveillance in livestock, with wider adaptations in food, clinical microbiology, and public health.

Comparative evaluation of agar dilution and broth microdilution by commercial and in-house plates for Bacteroides fragilis group: An economical and expeditious approach for resource-limited settings.

OBJECTIVE: To compare the performance of agar dilution and broth microdilution by commercial and in-house prepared plates for the Bacteroides fragilis group. The cost analysis was performed to demonstrate that in-house prepared BMD plates were a suitable alternative to agar dilution given the high cost and low feasibility of incorporating commercial BMD plates in routine, particularly in the tertiary care institutes of many low- and middle-income countries. METHODS: Thirty B. fragilis group isolates were tested against six antibiotics, frequently used as empirical therapy for anaerobic infections including metronidazole, clindamycin, imipenem, piperacillin-tazobactam, cefoxitin, and chloramphenicol. The running consumable expenditure for all methodologies was calculated. RESULTS: The results demonstrated essential and categorical agreement of >90% for all antibiotics except cefoxitin, which showed <90% categorical agreement. No major or very major errors were observed. We observed a high agreement and strong concordance for MIC values between both methods and inter-rate reliability of >0.9 by Cohen's kappa analysis, indicating almost perfect agreement between both methods using either of the plates. In contrast to agar dilution, a 20.5 fold cost reduction was seen in BMD using in-house plates and a 5.8 fold reduction using commercial plates to test a single isolate. However, when testing 30 isolates concurrently the cost significantly increased for commercial BMD plates by 8.4 folds, and only 1.03 fold cost reduction was seen with in-house BMD plates. CONCLUSION: BMD gives comparable results to agar dilution and can be considered a method of choice to test a small number of samples. The technique is an economical option when plates are standardized in-house and could be employed for susceptibility testing of the B. fragilis group.

Analysis of antimicrobial susceptibility testing methods and variables and in vitro activity of gepotidacin against urogenital Neisseria gonorrhoeae in men.

Gepotidacin is a triazaacenaphthylene antibiotic with activity against Neisseria gonorrhoeae including strains resistant to current agents. We tested 145 N. gonorrhoeae isolates by agar dilution according to Gonococcal Isolate Surveillance Program and Clinical and Laboratory Standards Institute methodologies. Gepotidacin demonstrated a minimum inhibitory concentration (MIC)50 of 0.25 µg/mL and a MIC90 of 0.5 µg/mL (highest gepotidacin MIC was 1 µg/mL) against the 145 N. gonorrhoeae isolates tested. We also assessed the impact of test variables on antimicrobial susceptibility test results for gepotidacin, ciprofloxacin, and ceftriaxone against 10 N. gonorrhoeae isolates. Media type had the biggest effect but wasn't specific to gepotidacin. Gepotidacin MICs were also affected by inoculum, pH, and 10% CO2. These in vitro data indicate that further study of gepotidacin is warranted for potential use in treating gonorrhea infections and highlight the importance of controlling for media type, inoculum, CO2, and pH when performing MIC testing with gepotidacin.

Evaluation of SuperCAZ/AVI® Medium for Screening Ceftazidime-avibactam Resistant Gram-negative Isolates.

The industrial version of SuperCAZ/AVI® medium developed for screening CAZ/AVI resistant Gram-negative isolates has been evaluated here using a collection of 87 well-characterized clinical isolates of worldwide origin. In addition, testing was performed by spiking stools with a series of resistant and susceptible isolates. In those conditions, the SuperCAZ/AVI® medium exhibited a sensitivity and specificity of 100 %, down to the lower limit of detection of 101 to 102 CFU/ml. The SuperCAZ/AVI® medium is a sensitive and specific screening medium for detection of CZA-resistant bacteria regardless of their resistance mechanisms.

Evaluation of the InTray and Compact Dry culture systems for the diagnosis of urinary tract infections in patients presenting to primary health clinics in Harare, Zimbabwe.

Antimicrobial resistance surveillance data is lacking from many resource-limited settings mainly due to limited laboratory testing. Novel culture systems may address some of the limitations of conventional culture media and expand the availability of microbiology services. The aims of this study were to evaluate the performance of InTray COLOREX Screen/ESBL and Compact Dry for the detection of uropathogens and of extended-spectrum beta-lactamase (ESBL)-producing organisms from urine samples. Urines samples were collected from patients presenting with symptoms of urinary tract infection to primary care clinics in Harare. Performance of the InTray COLOREX Screen, ESBL and Compact Dry chromogenic media were compared to the reference of culture using Brilliance UTI agar and conventional antimicrobial susceptibility testing. A total of 414 samples were included in the analysis. Of the included samples, 98 were positive on Brilliance UTI agar and 83 grew Enterobacterales. The sensitivities and specificities for Enterobacterales were 89.2% (95% CI 80.4-94.9) and 98.2% (95% CI 96.1-99.3) for InTray Screen and 95.2% (95% CI 88.1-98.7) and 99.7% (95% CI 98.3-100) for Compact Dry. Extended-spectrum beta-lactamases were present in 22 isolates from the Brilliance UTI agar. The sensitivity of the InTray COLOREX ESBL culture plates for the detection of ESBL-producing organisms was 95.5% (95% CI 77.2-99.9) and specificity was 99.5% (95% CI 98.2-99.9%). Our findings show good performance of the novel culture systems for the detection of uropathogens and ESBL-producing organisms. Both systems have several advantages over conventional media and have the potential to expand and decentralize laboratory testing.

High-throughput human primary cell-based airway model for evaluating influenza, coronavirus, or other respiratory viruses in vitro.

Influenza and other respiratory viruses present a significant threat to public health, national security, and the world economy, and can lead to the emergence of global pandemics such as from COVID-19. A barrier to the development of effective therapeutics is the absence of a robust and predictive preclinical model, with most studies relying on a combination of in vitro screening with immortalized cell lines and low-throughput animal models. Here, we integrate human primary airway epithelial cells into a custom-engineered 96-device platform (PREDICT96-ALI) in which tissues are cultured in an array of microchannel-based culture chambers at an air-liquid interface, in a configuration compatible with high resolution in-situ imaging and real-time sensing. We apply this platform to influenza A virus and coronavirus infections, evaluating viral infection kinetics and antiviral agent dosing across multiple strains and donor populations of human primary cells. Human coronaviruses HCoV-NL63 and SARS-CoV-2 enter host cells via ACE2 and utilize the protease TMPRSS2 for spike protein priming, and we confirm their expression, demonstrate infection across a range of multiplicities of infection, and evaluate the efficacy of camostat mesylate, a known inhibitor of HCoV-NL63 infection. This new capability can be used to address a major gap in the rapid assessment of therapeutic efficacy of small molecules and antiviral agents against influenza and other respiratory viruses including coronaviruses.

Evaluation of the BD Phoenix CPO detect panel for prediction of Ambler class carbapenemases.

Rapid detection of carbapenemases as a cause of resistance is beneficial for infection control and antimicrobial therapy. The BD Phoenix NMIC-502 panel and CPO detect test identifies presence of carbapenemases in Enterobacterales such as Klebsiella pneumoniae and assigns them to Ambler classes. To evaluate the performance of the CPO detect panel, we employed a European collection of 1222 K. pneumoniae including carbapenem non-susceptible and susceptible clinical isolates from 26 countries, for which draft genomes were available after Illumina sequencing and the presence of carbapenemase genes had been identified by ARIBA gene calling. The CPO panel detected 488 out of 494 carbapenemase-encoding isolates as positive and six as negative. One-hundred and two isolates were tested positive for carbapenemase in the absence of any carbapenemase gene. The CPO panel identified 229 out of 230 KPC-positive isolates as carbapenemase producing and classified 62 of these as class A enzyme. Similarly, the CPO panel correctly specified 167 of 182 as class D. Regarding metallo-beta-lactamases, the CPO panel assigned 78 of 90 MBL positive isolates to class B enzymes. The sensitivity of the CPO panel in detecting carbapenemase activity was 99.5%, 97.7% and 98.3% for class A, B and D enzymes, respectively. The sensitivity in assignation to Ambler class A, B and D was 27%, 86% and 91%, respectively. An overall sensitivity of 98.8% and specificity of 86% in unclassified detection of carbapenemases was observed, with frequent false positive detection of carbapenemase producing organisms, thus rendering further confirmatory tests necessary.

Evaluation of the MICRONAUT MIC-strip colistin assay for colistin susceptibility testing of carbapenem-resistant Acinetobacter baumannii and Enterobacterales.

We sought to evaluate the MICRONAUT MIC-Strip colistin (MMS) assay, a commercial broth microdilution (BMD) panel, using 273 carbapenem-resistant Acinetobacter baumannii and Enterobacterales isolates. BMD was used as gold standard. MMS had 98.5% sensitivity and 99.5% specificity. All 37 isolates with MICs close to the breakpoint exhibited complete agreement.