OphthalMimic: A new alternative apparatus without animal tissue for the evaluation of topical ophthalmic drug products.

The necessity of animal-free performance tests for novel ophthalmic formulation screening is challenging. For this, we developed and validated a new device to simulate the dynamics and physical-chemical barriers of the eye for in vitro performance tests of topic ophthalmic formulations. The OphthalMimic is a 3D-printed device with an artificial lacrimal flow, a cul-de-sac area, a support base, and a simulated cornea comprised of a polymeric membrane containing poly-vinyl alcohol 10 % (w/v), gelatin 2.5 % (w/v), and different proportions of mucin and poloxamer, i.e., 1:1 (M1), 1:2 (M2), and 2:1 (M3) w/v, respectively. The support base is designed to move between 0° and 50° to replicate the movement of an eyelid. We challenged the model by testing the residence performance of poloxamer®407 16 % and poloxamer®407 16 % + chitosan 1 % (PLX16CS10) gels containing fluconazole. The test was conducted with a simulated tear flow of 1.0 mL.min-1 for 5 min. The OphthalMimic successfully distinguished PLX16 and PLX16C10 formulations based on their fluconazole drainage (M1: 65 ± 14 % and 27 ± 10 %; M2: 58 ± 6 % and 38 ± 9 %; M3: 56 ± 5 % and 38 ± 18 %). In conclusion, the OphthalMimic is a promising tool for comparing the animal-free performance of ophthalmic formulations.

Development and evaluation of hot-melt-extruded diquafosol tetrasodium formulations for ophthalmic inserts: A design of experiments approach.

This study aimed to develop, optimize, and evaluate hot-melt-extruded ophthalmic inserts capable of sustained release of diquafosol tetrasodium (DQS) via a design of experiments approach. DQS, a tear stimulant for dry eye management, faces challenges of frequent administration and low bioavailability. The developed insert uses biodegradable polymers in varied proportions to achieve sustained release. Optimized through mixture design, the insert completely dissolved within 24 h and maintained a stable drug content, thickness, and surface pH over three months at room temperature. In vitro corneal permeation studies on excised rabbit corneas demonstrated increased bioavailability, suggesting a reduced dosing frequency compared with conventional eye drops. Therefore, this insert has potential to enhance treatment outcomes by improving patient compliance and providing sustained drug effects.

Combination of PEGylation and Cationization on Phospholipid-Coated Cyclosporine Nanosuspensions for Enhanced Ocular Drug Delivery.

Strong precorneal clearance mechanisms including reflex blink, constant tear drainage, and rapid mucus turnover constitute great challenges for eye drops for effective drug delivery to the ocular epithelium. In this study, cyclosporine A (CsA) for the treatment of dry eye disease (DED) was selected as the model drug. Two strategies, PEGylation for mucus penetration and cationization for potent cellular uptake, were combined to construct a novel CsA nanosuspension (NS@lipid-PEG/CKC) by coating nanoscale drug particles with a mixture of lipids, DSPE-PEG2000, and a cationic surfactant, cetalkonium chloride (CKC). NS@lipid-PEG/CKC with the mean size ∼173 nm and positive zeta potential ∼+40 mV showed promoted mucus penetration, good cytocompatibility, more cellular uptake, and prolonged precorneal retention without obvious ocular irritation. More importantly, NS@lipid-PEG/CKC recovered tear production and goblet cell density more efficiently than the commercial cationic nanoemulsion on a dry eye disease rat model. All results indicated that a combination of PEGylation and cationization might provide a promising strategy to coordinate mucus penetration and cellular uptake for enhanced drug delivery to the ocular epithelium for nanomedicine-based eye drops.

Breaking Barriers: Nanomedicine-Based Drug Delivery for Cataract Treatment.

Cataract is a leading cause of blindness globally, and its surgical treatment poses a significant burden on global healthcare. Pharmacologic therapies, including antioxidants and protein aggregation reversal agents, have attracted great attention in the treatment of cataracts in recent years. Due to the anatomical and physiological barriers of the eye, the effectiveness of traditional eye drops for delivering drugs topically to the lens is hindered. The advancements in nanomedicine present novel and promising strategies for addressing challenges in drug delivery to the lens, including the development of nanoparticle formulations that can improve drug penetration into the anterior segment and enable sustained release of medications. This review introduces various cutting-edge drug delivery systems for cataract treatment, highlighting their physicochemical properties and surface engineering for optimal design, thus providing impetus for further innovative research and potential clinical applications of anti-cataract drugs.

A SU6668 pure nanoparticle-based eyedrops: toward its high drug Accumulation and Long-time treatment for corneal neovascularization.

Corneal neovascularization (CNV) is one of the common blinding factors worldwide, leading to reduced vision or even blindness. However, current treatments such as surgical intervention and anti-VEGF agent therapy still have some shortcomings or evoke some adverse effects. Recently, SU6668, an inhibitor targeting angiogenic tyrosine kinases, has demonstrated growth inhibition of neovascularization. But the hydrophobicity and low ocular bioavailability limit its application in cornea. Hereby, we proposed the preparation of SU6668 pure nanoparticles (NanoSU6668; size ~135 nm) using a super-stable pure-nanomedicine formulation technology (SPFT), which possessed uniform particle size and excellent aqueous dispersion at 1 mg/mL. Furthermore, mesenchymal stem cell membrane vesicle (MSCm) was coated on the surface of NanoSU6668, and then conjugated with TAT cell penetrating peptide, preparing multifunctional TAT-MSCm@NanoSU6668 (T-MNS). The T-MNS at a concentration of 200 µg/mL was treated for CNV via eye drops, and accumulated in blood vessels with a high targeting performance, resulting in elimination of blood vessels and recovery of cornea transparency after 4 days of treatment. Meanwhile, drug safety test confirmed that T-MNS did not cause any damage to cornea, retina and other eye tissues. In conclusion, the T-MNS eye drop had the potential to treat CNV effectively and safely in a low dosing frequency, which broke new ground for CNV theranostics.

Dual-ROS-scavenging and dual-lingering nanozyme-based eye drops alleviate dry eye disease.

Efficiently removing excess reactive oxygen species (ROS) generated by various factors on the ocular surface is a promising strategy for preventing the development of dry eye disease (DED). The currently available eye drops for DED treatment are palliative, short-lived and frequently administered due to the short precorneal residence time. Here, we developed nanozyme-based eye drops for DED by exploiting borate-mediated dynamic covalent complexation between n-FeZIF-8 nanozymes (n-Z(Fe)) and poly(vinyl alcohol) (PVA) to overcome these problems. The resultant formulation (PBnZ), which has dual-ROS scavenging abilities and prolonged corneal retention can effectively reduce oxidative stress, thereby providing an excellent preventive effect to alleviate DED. In vitro and in vivo experiments revealed that PBnZ could eliminate excess ROS through both its multienzyme-like activity and the ROS-scavenging activity of borate bonds. The positively charged nanozyme-based eye drops displayed a longer precorneal residence time due to physical adhesion and the dynamic borate bonds between phenyboronic acid and PVA or o-diol with mucin. The in vivo results showed that eye drops could effectively alleviate DED. These dual-function PBnZ nanozyme-based eye drops can provide insights into the development of novel treatment strategies for DED and other ROS-mediated inflammatory diseases and a rationale for the application of nanomaterials in clinical settings.

Studies on cationic ocular emulsions containing bipartitioned oil droplets to codeliver cyclosporin A and etodolac.

Background: To prepare ocular emulsions containing bipartitioned oil droplets to entrap cyclosporin A (0.05% w/w) and etodolac (0.2% w/w) by using castor, olive and silicon oils. Methods: The physicochemical characterizations of prepared emulsions were performed. The drug's biodistribution profiles and pharmacokinetic parameters from emulsions were checked using the ultraperformance liquid chromatography-tandem mass spectrometry method in the ocular tissues of the healthy rabbit eye model. Results: The emulsions displayed 365.13 ± 7.21 nm size and 26.45 ± 2.09 mV zeta potential. The ferrying of two drugs after releasing from emulsions occurred across corneal/conjunctival tissues to enter the vitreous and sclera following a single drop administration into the rabbit's eyes. Conclusion: The dual drug-loaded emulsions were more likely to produce synergistic anti-inflammatory activity for managing moderate-to-severe dry eye disease.

[Box: see text].

Keratin Formed Bioadhesive Ophthalmic Gel for the Bacterial Conjunctivitis Treatment.

Keratin has the potential to function as the gel matrix in an ophthalmic formulation for the encapsulation of the macrolide antibiotic azithromycin. The quality of this formulation was thoroughly evaluated through various analyses, such as in vitro release assessment, rheological examination, intraocular retention studies in rabbits, assessment of bacteriostatic efficacy, and safety evaluations. It is worth mentioning that the gel demonstrated shear thinning properties and exhibited characteristics of an elastic solid, thereby confirming its structural stability. The gel demonstrated a notable affinity for mucosal surfaces in comparison to traditional azithromycin aqueous solutions. In vitro release testing revealed that drug release transpired via diffusion mechanisms, following a first-order kinetic release pattern. Additionally, the formulated gel exhibited remarkable antibacterial efficacy against Staphylococcus aureus and Pseudomonas aeruginosa in bacteriostatic evaluations. Lastly, safety assessments confirmed that the gel eye drops induced minimal irritation and displayed no apparent cytotoxicity, indicating their good safety and biocompatibility for ocular application. Thus, these findings indicated that the prepared azithromycin gel eye drops complied with the requisite standards for ophthalmic preparations.

Baicalein glycymicelle ophthalmic solution: Preparation, in vitro antimicrobial activities, and antimicrobial mechanism evaluations.

The purpose of this study was to develop a novel baicalein (BAI) loaded glycymicelle ophthalmic solution with small molecule phytochemical glycyrrhizin as nanocarriers and to explore this solution's potential as an antimicrobial agent against ocular infections. The optimized BAI glycymicelles had a high encapsulation efficiency (98.76 ±â€¯1.25 %), a small particle size (54.38 ±â€¯2.41 nm), a uniform size distribution (polydispersity index = 0.293 ±â€¯0.083), and a zeta potential of -28.3 ±â€¯1.17 mV. The BAI glycymicelle ophthalmic solution exhibited an excellent short-term storage stability. BAI glycymicelles significantly increased the apparent solubility and in vitro release capability of BAI. The BAI glycymicelle ophthalmic solution exhibited no hen's egg-chorioallantoic membrane' irritation and strong in vivo ocular tolerance in rabbits. The BAI glycymicelles noticeably enhanced the in vivo corneal permeation. The BAI glycymicelles also precipitated increased in vitro antioxidant activity and significantly improved in vitro antipathogen activities. Various antimicrobial mechanisms, including the destruction of the bacterial cell wall, damage to the bacterial cell membranes, interruptions to the biofilm structure, and the apoptosis of bacteria, were inflicted on BAI glycymicelles. These findings provided useful knowledge regarding the development of a novel ophthalmic solution and formulation of BAI.

A review on topical ophthalmic drug delivery system: Reference to viscosity enhancer.

The eye is the most accessible site for topical drug delivery. Drug's ocular bioavailability is quite low when administered topically as eye drops. Viscosity enhancers are used to increase ocular bioavailability by extending the precorneal residence time of the drug at the ocular site. Cellulose, polyalcohol and polyacrylic acid are examples of hydrophilic viscosity enhancers. The addition of viscosity modifiers increases the amount of time the drug is in contact with the ocular surface. Several polysaccharides have been studied as excipients and viscosity boosters for ocular formulations, including cellulose derivatives such as chitosan (CS), xyloglucan and arabinogalactan (methylcellulose, hydroxyethylcellulose, hydroxypropylmethylcellulose (HPMC), and sodium carboxymethylcellulose). Viscosity-increasing substances reduce the surface tension, extend the corneal contact time, slow the drainage, and improve the bioavailability. Chitosan is a viscosity enhancer that was originally thought to open tight junction barrier cells in the epithelium. Chitosan thickens the medication solution and allows it to penetrate deeper. Alginate is an anionic polymer with carboxyl end groups that has the highest mucoadhesive strength and is used to improve penetration. Carboxymethylcellulose (CMC), a polysaccharide with a high molecular weight, is one of the most common viscous polymers used in artificial tears to achieve their longer ocular surface residence period. Hyaluronic acid (HA) is biocompatible and biodegradable in nature, and it is available in ocular sustained-release dose forms. A polymer known as xanthan gum is used to increase viscosity. At 0.2% concentration, carbomer forms a highly viscous gel.

Synergism of polysaccharide polymers in antihistamine eye drops: Influence on physicochemical properties and in vivo efficacy.

The incorporation of polymers into drug delivery vehicles has been shown to be a useful approach to prolong the residence time of drugs in the precorneal tear film and to improve penetration into biological membranes. The main objective of this research was to formulate novel viscous eye drops with ketotifen as the active ingredient, containing the polysaccharides: chitosan (MCH), hydroxypropyl guar gum (HPG) and hyaluronic acid (SH) alone and in combination as functional polymers. DSC and FT-IR techniques showed the compatibility between ketotifen and polymers. Physicochemical and rheological analysis at ambient and simulated physiological conditions, as well as the evaluation of mucoadhesive properties showed that vehicles containing combinations of polymers have suitable physicochemical and functional properties with demonstrated synergism between combined polymers (MCH and HPG i.e. SH and HPG). The drug permeability was successfully estimated in vitro using HCE-T cell-based models. MTT cytotoxicity assay demonstrates that the tested formulations were non-toxic and well tolerated. In vivo preclinical study on mice revealed that both vehicles containing mixed polymers enhanced and prolonged the antipruritic/analgesic-like effect of ophthalmic ketotifen. Based on these results, both combinations of polysaccharide polymers, especially SH-HPG, could be considered as potential new carriers for ketotifen for ophthalmic use.

The effect on the five FDA soft contact lens material types of prolonged exposure to phospholipid-based eye drops.

OBJECTIVE: The aim of this study was to assess the effects of regular phospholipid tear supplement application on five soft contact lens materials (FDA Types I-V). MATERIALS AND METHODS: Twenty unworn lenses of each lens type were assessed and given an identification number. An initial set of measurements was made on each lens before being immersed in the phospholipid tear supplement solution for one hour. After one hour, the lens was removed, gently rinsed in saline, and the measurements were repeated.  This process was repeated for each lens, of each type.  Each lens parameter was assessed in the sequence: Refractive Index (% H2O), Dioptric Power (BVP), Lens Diameter (OD), and Lens Curvature (BCOR). RESULTS: All measurements of % H2O, BVP, OD and BCOR did not differ between baseline and after lenses being immersed in the phospholipid tear supplement solution for one hour [all soft contact lens materials (FDA Types I-V) p > 0.05]. However, in the type IV lenses, a statistically significant change in the % H2O was found. Only a 1% reduction was observed, and, in the investigator's opinion, the significance of these results is due more to a statistical anomaly produced by having very repeatable measurements showing very little variation. CONCLUSIONS: The phospholipid tear supplement solution did not adversely change the physical parameters of unworn soft contact lenses, of the five FDA Types, to the extent that would be considered clinically significant.

New Candidate Preservative in Ophthalmic Solution Instead of Benzalkonium Chloride: 1,3-Didecyl-2-methyl Imidazolium Chloride.

Benzalkonium chloride (BAC) is a useful preservative for ophthalmic solutions but has some disadvantageous effects on corneal epithelium, especially keratinocytes. Therefore, patients requiring the chronic administration of ophthalmic solutions may suffer from damage due to BAC, and ophthalmic solutions with a new preservative instead of BAC are desired. To resolve the above situation, we focused on 1,3-didecyl-2-methyl imidazolium chloride (DiMI). As a preservative for ophthalmic solutions, we evaluated the physical and chemical properties (absorption to a sterile filter, solubility, heat stress stability, and light/UV stress stability), and also the anti-microbial activity. The results indicated that DiMI was soluble enough to prepare ophthalmic solutions, and was stable under severe heat and light/UV conditions. In addition, the anti-microbial effect of DiMI as a preservative was considered to be stronger than BAC. Moreover, our in vitro toxicity tests suggested that DiMI is safer to humans than BAC. Considering the test results, DiMI may be an excellent candidate for a new preservative to replace BAC. If we can overcome manufacturing process issues (soluble time and flushing volume) and the insufficiency of toxicological information, DiMI may be widely adopted as a safe preservative, and immediately contribute to the increased well-being of all patients.

Therapeutic applications of contact lens-based drug delivery systems in ophthalmic diseases.

Traditional ophthalmic drugs, such as eye drops, gels and ointments, are accompanied by many problems, including low bioavailability and potential drug side effects. Innovative ophthalmic drug delivery systems have been proposed to overcome the limitations associated with traditional formulations. Recently, contact lens-based drug delivery systems have gained popularity owing to their advantages of sustained drug delivery, prolonged drug retention, improved bioavailability, and few drug side effects. Various methods have been successfully applied to drug-loaded contact lenses and prolonged the drug release time, such as chemical crosslinking, material embedding, molecular imprinting, colloidal nanoparticles, vitamin E modification, drug polymer film/coating, ion ligand polymerization systems, and supercritical fluid technology. Contact lens-based drug delivery systems play an important role in the treatment of multifarious ophthalmic diseases. This review discusses the latest developments in drug-loaded contact lenses for the treatment of ophthalmic diseases, including preparation methods, application in ophthalmic diseases and future prospects.

Comparative study of cyclosporine A liposomes and emulsions for ophthalmic drug delivery: Process optimization through response surface methodology (RSM) and biocompatibility evaluation.

Herein, cyclosporine A loaded liposomes (CsA-Lips) were fabricated aimed at improving the biocompatibility of the ophthalmic formulation and getting rid of the direct contact of ocular tissues with irritant excipients. Response surface methodology was exploited in order to investigate the influence of miscellaneous factors on the key characteristics of CsA-Lips. Ratio of EPC:CsA, ratio of EPC:Chol, and stirring speed were selected as the independent variables, while size, drug-loading content (DL), and drug-loading content (DL) loss rate were applied as the response variables. In case of the maximal lack-of-fit p-value and minimum sequential p-value, quadratic model was regarded as the fittest model to analyze the data. The correlation of independent variables with response variables was described by three-dimension surface figures. Optimized formulation for CsA-Lips was obtained with ratio of EPC:CsA set as 15, ratio of EPC:Chol set as 2, and stirring speed set as 800 rpm. The particle size of CsA-Lips was 129.2 nm after optimalization while their TEM images exhibited spherical unilamellar vesicles with clearly shell-core structure. CsA released more rapidly from CsA-Lips in comparison with self-made emulsion and Restasis®. Besides, minimum cytotoxicity of CsA-Lips was perceived via both MTT method and LDH method, indicating the excellent compatibility of the ophthalmic formulation. Simultaneously, CsA-Lips showed enhanced nonspecific internalization in the cytoplasm with a time-dose-dependent manner. In conclusion, CsA-Lips could be adhibited as the hopeful ophthalmic drug delivery system clinically for dry eye syndrome (DES).

Research progress of ophthalmic preparations of immunosuppressants.

Immune ophthalmopathy is a collection of autoimmune eye diseases. Immunosuppressants are drugs that can inhibit the body's immune response. Considering drug side effects such as hepatorenal toxicity and the unique structure of the eye, incorporating immunosuppressants into ophthalmic nanodrug delivery systems, such as microparticles, nanoparticles, liposomes, micelles, implants, and in situ gels, has the advantages of improving solubility, increasing bioavailability, high eye-target specificity, and reducing side effects. This study reviews recent research and applications of this aspect to provide a reference for the development of an ophthalmic drug delivery system.

Local Ugandan Production of Stable 0.2% Chlorhexidine Eye Drops.

Purpose: The purpose of this study was to develop a protocol to prepare buffered chlorhexidine (CHX) eye drops (0.2% w/v) in the United Kingdom that can be reproduced at a production facility in Uganda. Buffered CHX eye drops can prevent CHX degradation and improve ocular tolerability during the treatment of fungal keratitis. Methods: Buffered CHX eye drops in amber glass containers were prepared using sodium acetate buffer at pH 5.90 to 6.75. Two commercial CHX solutions and CHX in water were used as controls. Eye drops were stored at 40°C (70% humidity, 21 months) in the United Kingdom and at ambient temperature in Uganda (30 months). High-performance liquid chromatography was used to determine CHX stability over time, and pH was monitored. Sterility was achieved using an autoclave (121°C, 15 minutes) and water bath (100°C, 30 minutes). Results: The pH of acetate-buffered CHX eye drops did not change over 21 months at 40°C or at ambient temperature (30 months), whereas the pH of the unbuffered aqueous CHX displayed significant fluctuations, with an increase in acidity. The CHX concentration remained the same in both buffered and unbuffered eye-drop solutions. Eye drops sterilization was successful using an autoclave and a water bath. Conclusions: Stable, sterile, buffered CHX eye drops (pH 6.75) were successfully prepared first in the United Kingdom and then reproducibly in Uganda. This eye drops can be prepared in a hospital or pharmacy setting with limited resources, thus providing a cost-effective treatment for fungal keratitis. Translational Relevance: A protocol has been developed to prepare buffered CHX eye drops in low- and middle-income countries to treat fungal keratitis.

Construction and Evaluation of Hyaluronic Acid-Coated Flurbiprofen-Layered Double Hydroxide Ocular Drug Delivery System.

In this study, flurbiprofen (FB) was selected as the model drug, and hyaluronic acid-coated flurbiprofen-layered double hydroxide ophthalmic drug delivery system (HA-FB-LDH) was designed and prepared. In this system, the model drug flurbiprofen was intercalated in layered double hydroxide and coated with hyaluronic acid (HA), so as to prolong the corneal residence time and increase the corneal permeability of the drug. Layered double hydroxide (LDH) was prepared by alcohol-water coprecipitation method. Through single factor investigation, the optimum preparation conditions were obtained as follows: The Mg/Al ratio was 2:1, the reaction pH was 11.0, the hydrothermal reaction time was 24 h, and the hydrothermal reaction temperature was 100°C. Under these conditions, the particle size of LDH was 116.4 ± 0.8 nm, the potential was 42.2 ± 1.2 mV, and a relatively regular crystal structure could be had. Then FB was intercalated into the LDH layer to prepare flurbiprofen-layered double hydroxide (FB-LDH). In the end, HA-FB-LDH was prepared by the stirring-ultrasonic method, in which through prescription screening, the molecular weight of HA was 200-400 kDa and the concentration of HA solution was 1.25 mg·mL -1, the final particle size of HA-FB-LDH was 185.8 ± 3.3 nm, and potential of - 31.4 ± 0.7 mV. The successful loading of FB and the coating of HA were verified by XRD, FTIR, TGA, TEM, and other characterization methods. The results of in vitro stability experiment indicated that the coating of HA could significantly enhance the stability of LDH in the presence of electrolytes. The in vitro release results suggested that the cumulative release amounts of FB-LDH and HA-FB-LDH within 12 h were 92.99 ± 0.37% and 74.82 ± 0.29% respectively, showing a certain sustained release effect. At the same time, the release mechanism of FB-LDH was preliminarily explored by in vitro release experiment, which proved that the release mechanism of FB-LDH was mainly ion exchange. The results of in vivo ocular irritation experiments demonstrated that the ophthalmic preparation studied in this paper was safe and non-irritating. The results of tear pharmacokinetics in rabbits showed that the area under the curve(AUC), the average residence time (MRT), and the highest concentration (Cmax) in tears in the HA-FB-LDH group were 4.43, 4.48, and 2.27 times higher than those in eye drops group separately. Furthermore, the AUC of the HA-FB-LDH group was 1.48 times higher than that of the FB-LDH group. The above results suggested that HA-FB-LDH could improve the precorneal residence time. The results of aqueous humor pharmacokinetics in rabbits indicated that the AUC, MRT, and maximum concentration (Cmax) in aqueous humor in the HA-FB-LDH group were 6.88, 2.15, and 4.08 times of those in the eye drop group respectively. Additionally, the AUC and MRT of the HA-FB-LDH group were 1.55 and 1.63 times those of the FB-LDH group separately. These mentioned findings verified that HA-FB-LDH could enhance the corneal permeability of the drug. The fluorescent substance-fluoresce isothiocyanate (FITC) was substituted for FB intercalation in LDH for in vitro tissue imaging study of rabbits, whose results stated clearly that FITC-LDH and HA-FITC-LDH could both prolong the precorneal residence time of drugs, and HA-FITC-LDH could increase the corneal permeability of the drug to a certain extent. To sum up, HA-FB-LDH, which can overcome the shortcomings of low bioavailability of traditional eye drops to a certain degree, is a safe and effective ophthalmic drug delivery system.

Development of Fenofibrate/Randomly Methylated ß-Cyclodextrin-Loaded Eudragit® RL 100 Nanoparticles for Ocular Delivery.

Fenofibrate (FE) has been shown to markedly reduce the progression of diabetic retinopathy and age-related macular degeneration in clinical trials and animal models. Owing to the limited aqueous solubility of FE, it may hamper ocular bioavailability and result in low efficiency to treat such diseases. To enhance the solubility of FE, water-soluble FE/cyclodextrin (CD) complex formation was determined by a phase-solubility technique. Randomly methylated-ß-CD (RMßCD) exhibited the best solubility and the highest complexation efficiency (CE) for FE. Additionally, water-soluble polymers (i.e., hydroxypropyl methyl cellulose and polyvinyl alcohol [PVA]) enhanced the solubility of FE/RMßCD complexes. Solid- and solution-state characterizations were performed to elucidate and confirm the formation of inclusion FE/RMßCD complex. FE-loaded Eudragit® nanoparticle (EuNP) dispersions and suspensions were developed. The physicochemical properties (i.e., pH, osmolality, viscosity, particle size, size distribution, and zeta potential) were within acceptable ranges. Moreover, in vitro mucoadhesion, in vitro release, and in vitro permeation studies revealed that the FE-loaded EuNP eye drop suspensions had excellent mucoadhesive properties and sustained FE release. The hemolytic activity, hen's egg test on chorioallantoic membrane assay, and in vitro cytotoxicity test showed that the FE formulations had low hemolytic activity, were cytocompatible, and were moderately irritable to the eyes. In conclusion, PVA-stabilized FE/RMßCD-loaded EuNP eye drop suspensions were successfully developed, warranting further in vivo testing.

Gellan gum-based in situ gelling ophthalmic nanosuspension of Posaconazole.

The formulation and delivery of highly hydrophobic drugs in an optimized dosage form is challenging to formulation scientists. Posaconazole has shown promising action in case studies against fungal keratitis. Biological macromolecules like gellan gum would aid in enhancing the availability of such drugs by increasing the contact time of the formulation. Herein, we propose a transmucosal ocular delivery system of Posaconazole by developing a gellan gum-based in situ gelling nanosuspension. The HPLC method for Posaconazole was developed and validated as per ICH guidelines. The nanosuspension was prepared by microfluidization and optimized by Quality by Design. The gellan gum concentration selected was 0.4% w/v based on the viscosity and mucoadhesion measurements. A greater zone of inhibition of ~ 15 mm was observed for the prepared nanosuspension as compared to ~ 11 mm for the marketed itraconazole nanosuspension. A potential irritancy score of 0.85, considered to be non-irritant, was observed for the developed nanosuspension. Higher drug release of ~ 35% was noted for the nanosuspension compared to about ~ 10% for the coarse suspension. Ex vivo corneal retention studies on excised goat cornea demonstrated ~ 70% drug retention in the tissue. Graphical abstract depicting the central hypothesis of the work.