Quantitative and Structural Characterization of Native Lignin in Hardwood and Softwood Bark via Solid-State NMR Spectroscopy.

A major factor limiting bark's industrial use is its greater recalcitrance compared to wood. While lignin is widely recognized as a significant contributor, precise characterization of lignin in bark remains sparse, presenting a crucial gap that impedes understanding of its impact. In this study, we employed advanced solid-state nuclear magnetic resonance (NMR) spectroscopy to analyze bark samples from various species, including willow, poplar, and pine. We established and verified that lignin methoxy peak at 56 ppm serves as a reliable quantitative metric to assess lignin content, with which we calculated the lignin contents in bark are significantly reduced by more than 70% compared to those in wood. Furthermore, in situ characterization revealed significant reduction of ß-ether linkage in bark lignin across species, revealing a more condensed and resistant structural configuration. Our results have substantially advanced our comprehension of the composition and structure of native lignin in tree bark.

Unveiling drastic influence of cross-interactions in hydrothermal carbonization of spirulina with cellulose, lignin or poplar on nature of hydrochar and activated carbon.

Spirulina platensis contains abundant nitrogen-containing organics, which might react with derivatives of cellulose/lignin during hydrothermal carbonization (HTC), probably affecting yield, property of hydrochar, and pore development in activation of hydrochar. This was investigated herein by conducting co-HTC of spirulina platensis with cellulose, lignin, and sawdust at 260 °C and subsequent activation of the resulting hydrochars with K2C2O4 at 800 °C. The results showed that cross-condensation of spirulina platensis-derived proteins with cellulose/lignin-derived ketones and phenolics did take place in the co-HTC, forming more π-conjugated heavier organics, retaining more nitrogen species in hydrochar, reducing yields of hydrochar, making the hydrochar more aromatic and increasing the thermal stability and resistivity towards activation. This enhanced the yield of activated carbon (AC) by 7 %-20 % and significantly increased specific surface area of the AC from activation of hydrochar of spirulina platensis + lignin to 2074.5 m2/g (859.3 m2/g from spirulina platensis only and 1170.1 m2/g from lignin only). Furthermore, more mesopores from activation of hydrochar of spirulina platensis + cellulose (47 %) and more micropores from activation of hydrochar of spirulina + sawdust (93 %) was generated. The AC from spirulina platensis + lignin with the developed pore structures generated sufficient sites for adsorption of tetracycline from aqueous phase and minimized steric hindrance for mass transfer with the abundant mesopores (43 %).

A coupling strategy combined with acid-hydrothermal and novel DES pretreatment: Enhancing biomethane yield under solid-state anaerobic digestion and efficiently producing xylo-oligosaccharides and recovered lignin from poplar waste.

Lignocellulose is an abundant renewable bio-macromolecular complex, which can be used to produce biomethane and other high-value products. The lignin, presents in lignocellulose is typically regarded as an inhibitor of anaerobic digestion. Therefore, it is crucial to develop a novel selective separation strategy to achieve efficient biomethane production and all-component utilization of biomass. Hence, a combination of two-step pretreatment and solid-state anaerobic digestion was employed to enhance the production of biomethane and to generate valuable chemicals from poplar waste. Optimal conditions (4 % acetic acid, 170 °C, and 40 min) resulted in 70.85 % xylan removal, yielding 50.28 % xylo-oligosaccharides. The effect of a strong acid 4-CSA-based novel three-constituent DES on delignification was investigated from 80 °C to 100 °C; the cellulose content of DES pretreated poplar increased from 64.11 % to 80.92 %, and the delignification rate increased from 49.0 % to 90.4 %. However, high delignification of the pretreated poplar (DES-100 and DES-110) led to a rapid accumulation of volatile organic acids during the hydrolysis and acidogenesis stages, resulting in methanogenesis inhibition. The highest biomethane yield of 208 L/kg VS was achieved with DES-80 (49.0 % delignification), representing a 148 % improvement compared over untreated poplar. This approach demonstrates the potential for comprehensive utilization of all components of biomass waste.

Development of binderless fiberboard from poplar wood residue with Trametes hirsuta.

The utilization of agricultural and forestry residues for the development and preparation of green binderless fiberboard (BF) is an effective way to realize high-value utilization of lignocellulose biomass resources. This study focuses on the fabrication of BF with excellent mechanical and waterproof properties, utilizing poplar wood residue (PWR) as raw material and Trametes hirsuta as a pretreatment method. During the fermentation process, lignin-degrading enzymes and biological factors, such as sugars, were produced by T. hirsuta, which activated lignin by depolymerizing lignin bonds and modifying structural functional groups, and forming new covalent bonds between poplar fibers, ultimately enhancing adhesion. Additionally, the activated lignin molecules and sugar molecules coalesce under high temperatures and pressures, forming a dense carbonization layer that bolsters the mechanical properties of the fiberboard and effectively shields it from rapid water infiltration. The bio-pretreated BF for 10 days shows a MOR and MOE of up to 36.1 Mpa and 3704.3 Mpa, respectively, which is 261% and 247.8% higher than that of the bio-untreated fiberboard, and the water swelling ratio (WSR) rate is only 5.6%. Chemical composition analysis revealed that repolymerization occurred among lignin, cellulose, and hemicellulose, especially the molecular weight of lignin changed significantly, with the Mw of lignin increasing from 312066 g/mol to 892362 g/mol, and then decreasing to 825021 g/mol. Mn increased from 277790 g/mol to 316987.5 g/mol and then decreased to 283299.5 g/mol at 21 days. Compared to other artificial fiberboards prepared through microbial pretreatment, the BF prepared by microorganisms in this study exhibited the highest mechanical properties among the poplar wood biobased panels.

A designed ZrOCl2/ethylene glycol deep eutectic solvent for efficient lignocellulose valorization.

Deep eutectic solvents (DESs) hold great potential in biorefining because they can efficiently deconstruct the recalcitrant structure of lignocellulose. In particular, inorganic salts with Lewis acids have been proven to be effective at cleaving lignin-carbohydrate complexes. Herein, a Zr-based DES system composed of metal chloride hydrate (ZrOCl2·8H2O) and ethylene glycol (EG) was designed and used for poplar powder pretreatment. Zr4+-based salts provide sufficient acidity for lignocellulose depolymerization. The acidity of the DES was analysed by the Kamlet-Taft solvatochromic parameter, and the results demonstrated that the acidity can be regulated by the DES composition. Under the optimum conditions (ZrOCl2·8H2O:EG molar ratio of 1:2), the DES pretreatment removes nearly 100 % hemicellulose and 94.7 % lignin. The recovered lignin exhibited a low polydispersity of 1.7. The cellulose residues deliver an efficiency of 94.4 % upon enzymatic digestion. Moreover, the DES can be easily recovered with high yield and purity, and the recycled DES still maintains high delignification and enzymatic hydrolysis efficiencies. The proposed DES pretreatment technology is promising for biomass valorization.

Wound healing potential of a formula based on Populus nigra L. flower buds extract with anti-inflammatory activity.

ETHNOPHARMACOLOGICAL RELEVANCE: Wound healing is a complex and dysnamic process supported by a myriad of cellular events that are tightly coordinated to repair efficiently damaged tissue. Populus nigra L. (Salicaceae) flower buds are traditionally used in the treatment of dermatitis, upper respiratory tract infections, rheumatism and wounds. AIM OF THE STUDY: The aim of this study was to assess the wound healing potential of black poplar ointment containing 10 or 20 % of Populus nigra ethanolic flower buds extract using the excision model in rats. MATERIALS AND METHODS: Two ointments (10 and 20 %) were prepared from Populus nigra flower buds ethanolic extract and topically applied on the area of excised skin of the rats for either 14 or 20 days. Morphological, macroscopic, histological and biochemical parameters were evaluated. RESULTS: The results showed that the extract contained high amounts of total phenols (89.5 ± 7.7 mg caffeic acid equivalent/g of extract) and hydrolysable tannins (142.05 ± 2.55 mg tannic acid equivalent/g of extract), in correlation with strong DPPH (2,2-diphenyl-1-picrylhydrazyl) radical scavenging activity and beta-carotene bleaching with values of 96.31 ± 3.42 and 85.27 ± 1.79 %, respectively. Anti-inflammatory potential was illustrated by lipoxygenase and cyclooxygenase inhibition (52.80 ± 0.2 and 53.88 ± 2.55 %, respectively). Treatment with Populus nigra ointment (10 and 20 %) promoted wound contraction of 97.37 ± 1.19 and 97.28 ± 0.91 %, respectively. The antioxidant marker enzymes, catalase (0.10 ± 0.001; 0.08 ± 0.003 U/mg protein) and superoxide dismutase (363.34 ± 24.37; 317.82 ± 53.83 U/mg protein) activities in the granulation tissues were upgraded with respective treatments of 10 or 20 % ointment. Concurrently, the myeloperoxidase activity (2.21 ± 1.01; 2.13 ± 0.75 U/mg protein) was repressed, indicating anti-inflammatory potential, when compared to untreated, standard and excipient groups. Moreover, a significant increase in respective levels of hydroxyproline (p < 0.001) (28.05 ± 1.20; 25.29 ± 1.17 µg/mg tissue) and hexosamine (p < 0.05) (20.18 ± 1.21; 18.95 ± 1.98 µg/mg tissue) was triggered, reflecting a high regeneration of collagen in the scarred tissue. Histological examination of treated skin tissue revealed higher rates of re-epithelialization, lower neutrophils infiltration and re-vascularization in comparison to the control group. CONCLUSION: Given that the 10 % ointment was the optimal concentration, our findings offer an efficient drug formula for wound healing.

Ectopic Production of 3,4-Dihydroxybenzoate in Planta Affects Cellulose Structure and Organization.

Lignocellulosic biomass is a highly sustainable and largely carbon dioxide neutral feedstock for the production of biofuels and advanced biomaterials. Although thermochemical pretreatment is typically used to increase the efficiency of cell wall deconstruction, genetic engineering of the major plant cell wall polymers, especially lignin, has shown promise as an alternative approach to reduce biomass recalcitrance. Poplar trees with reduced lignin content and altered composition were previously developed by overexpressing bacterial 3-dehydroshikimate dehydratase (QsuB) enzyme to divert carbon flux from the shikimate pathway. In this work, three transgenic poplar lines with increasing QsuB expression levels and different lignin contents were studied using small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS). SANS showed that although the cellulose microfibril cross-sectional dimension remained unchanged, the ordered organization of the microfibrils progressively decreased with increased QsuB expression. This was correlated with decreasing total lignin content in the QsuB lines. WAXS showed that the crystallite dimensions of cellulose microfibrils transverse to the growth direction were not affected by the QsuB expression, but the crystallite dimensions parallel to the growth direction were decreased by ∼20%. Cellulose crystallinity was also decreased with increased QsuB expression, which could be related to high levels of 3,4-dihydroxybenzoate, the product of QsuB expression, disrupting microfibril crystallization. In addition, the cellulose microfibril orientation angle showed a bimodal distribution at higher QsuB expression levels. Overall, this study provides new structural insights into the impact of ectopic synthesis of small-molecule metabolites on cellulose organization and structure that can be used for future efforts aimed at reducing biomass recalcitrance.

Integrated Preparation of Hollow Lignin Nanoparticles as a Drug Carrier and Levulinic Acid from the Poplar Wood Prehydrolysis Liquor.

Prehydrolysis liquid (PHL) from dissolving pulp and biorefinery industries is rich in saccharides and lignin, being considered as a potential source of value-added materials and platform molecules. This study proposed an environmentally friendly and simple method to prepare morphologically controllable hollow lignin nanoparticles (LNPs) and levulinic acid (LA) from PHL. In the first step, after hydrothermal treatment of PHL with p-toluenesulfonic acid (p-TsOH), lignin with a uniform molecular weight was obtained to prepare LNPs. The prepared LNPs have an obvious hollow structure, with an average size of 490-660 nm, and exhibit good stability during 30 days of storage. When the as-obtained LNPs were used as a sustained-release agent for amikacin sulfate, the encapsulation efficiency reached over 70% and the release efficiency within 40 h reached 69.2% in a pH 5.5 buffer. Subsequently, the remaining PHL that contains saccharides was directly used for LA production under the catalysis of p-TsOH. At 150 °C for 1.5 h, the LA yield reached 58.4% and remained at 56% after 5 cycles of p-TsOH. It is worth noting that only p-TsOH was used as a reactive reagent throughout the entire preparation process. Overall, this study provided a novel pathway for the integrated utilization of PHL and showed the immense potential of the preparation and application of LNPs.

A study on the simultaneous determination of nitrogen content and 15N isotope abundance in plants using peak height intensities at m/z 28 and 29.

A method for simultaneous determination of nitrogen content and 15N isotope abundance in plants was established by Elemental analysis-gas isotope ratio mass spectrometry. Taking poplar leaves and l-glutamic acid as standards, nitrogen content was determined using the standard curve established by weighted least squares regression between the mass of nitrogen element and the total peak height intensity at m/z 28 and 29. Then the 15N isotope abundance was calculated with the peak height intensity at m/z 28 and 29. Through the comparison of several sets of experiments, the impact of mass discrimination effect, tin capsule consumables, isotope memory effect, and the quality of nitrogen on the results were assessed. The results showed that with a weight of 1/x2, the standard curve has a coefficient of determination (R2) of 0.9996. Compared to the traditional Kjeldahl method, the measured nitrogen content deviated less than 0.2 %, and the standard deviation (SD) was less than 0.2 %. Compared to the sodium hypobromite method, the 15N isotopic abundances differed less than 0.2 atom%15N, and the SD was less than 0.2 atom% 15N. The established method offers the advantages of being fast, simple, accurate, and high throughput, providing a novel approach for the simultaneous determination of nitrogen content and 15N isotope abundance in plant samples.

Wood dimensional stability enhancement by multivalent metal-cation-induced lignocellulosic microfibrils crosslinking.

Wood is a hygroscopic material that responds to the moisture changes of the surrounding environment through swelling and shrinkage, making it dimensionally unstable. Here, we introduce a facile metal-ion-modification (MIM) approach to enhance the dimensional stability of wood. The MIM process involved swelling the wood samples with aqueous metal ion solutions and drying. The high valent metal cations, such as Fe3+, Al3+, and Zr4+, interacted with the hydrophilic groups (e.g., OH, COOH) present in the wood fibers, limiting their access to water and moisture, thereby enhancing the wood's hydrophobicity and dimensional stability. Evaluation of three wood species, southern yellow pine, poplar, and red oak, revealed water contact angles of 120-130° after MIM, indicative of enhanced surface hydrophobicity. Fe3+ treatment decreased southern yellow pine's swelling ratio from 6 % to 4 %. Fe3+-treated wood exhibited tangential anti-swelling efficiencies ranging from 39.83 % to 57.14 % and radial anti-swelling efficiencies from 34.74 % to 48.33 %, varying across wood species. The enhancement of wood dimensional stability can be attributed to the formation of irreversible coordination bonds between metal cations and lignocellulosic microfibrils in the wood cell wall. These bonds prevent the microfibrils from slipping in response to moisture absorption and desorption.

A novel black poplar propolis extract with promising health-promoting properties: focus on its chemical composition, antioxidant, anti-inflammatory, and anti-genotoxic activities.

Propolis is a resinous mixture produced by honeybees which has been used since ancient times for its useful properties. However, its chemical composition and bioactivity may vary, depending on the geographical area of origin and the type of tree bees use for collecting pollen. In this context, this research aimed to investigate the total phenolic content (using the Folin-Ciocalteu assay) and the total antioxidant capacity (using the FRAP, DPPH, and ABTS assays) of three black poplar (Populus nigra L.) propolis (BPP) solutions (S1, S2, and S3), as well as the chemical composition (HPLC-ESI-MSn) and biological activities (effect on cell viability, genotoxic/antigenotoxic properties, and anti-inflammatory activity, and effect on ROS production) of the one which showed the highest antioxidant activity (S1). The hydroalcoholic BPP solution S1 was a prototype of an innovative, research-type product by an Italian nutraceutical manufacturer. In contrast, hydroalcoholic BPP solutions S2 and S3 were conventional products purchased from local pharmacy stores. For the three extracts, 50 phenolic compounds, encompassing phenolic acids and flavonoids, were identified. In summary, the results showed an interesting chemical profile and the remarkable antioxidant, antigenotoxic, anti-inflammatory and ROS-modulating activities of the innovative BPP extract S1, paving the way for future research. In vivo investigations will be a possible line to take, which may help corroborate the hypothesis of the potential health benefits of this product, and even stimulate further ameliorations of the new prototype.

Unrevealing the influence of reagent properties on disruption and digestibility of lignocellulosic biomass during alkaline pretreatment.

Beyond the conventional consideration of pretreatment severity (PS) responsible for biomass disruption, the influence of reagent properties on biomass (LCB) disruption is often overlooked. To investigate the LCB disruption as a function of reagent properties, reagents with distinct cations (NaOH and KOH) and significantly higher delignification potential were chosen. NaOH solution (3 % w/v) with a measured pH of 13.05 ± 0.01 is considered the reference, against which a KOH solution (pH = 13.05 ± 0.01) was prepared for LCB pretreatment under the same PS. Despite comparable lignin content, varying glucose yield of NaOH (68.76 %) and KOH (46.88 %) pretreated residues indicated the presence of heterogeneously disrupted substrate. Holocellulose extracted from raw poplar (ASC, control) and alkaline pretreated residues (C-NaOH and C-KOH) were analyzed using HPLC, XRD, SEM, TGA/DTG, XPS, and 13CP MAS NMR to investigate the pretreatment-induced structural modification. Results revealed that, despite the same pretreatment severity, better disruption in C-NaOH (higher accessible fibril surface and less-ordered region) leading to higher digestibility than C-KOH, likely due to the smaller ionic radius of Na+, facilitates better penetration into dense LCB matrix. This study elucidates the importance of considering the reagent properties during LCB pretreatment, eventually enhancing consciousness while selecting reagents for efficient LCB utilization.

Tween 80 reversed adverse effects of combined autohydrolysis and p-toluenesulfonic acid pretreatment on enzymatic hydrolysis of poplar.

In this study, a combined pretreatment involving autohydrolysis and p-toluenesulfonic acid (p-TsOH) was performed on poplar to coproduce xylooligosaccharides (XOSs) and monosaccharides. The autohydrolysis (180 °C, 30 min) yielded 53.2 % XOS and enhanced the delignification efficiency in the subsequent p-TsOH treatment. Furthermore, considerably high glucan contents (64.1 %∼83.1 %) were achieved in the combined pretreated substrates. However, their enzymatic digestibilities were found to be extremely poor (9.6 %∼14.2 %), which were even lower than the single p-TsOH pretreated substrates (10.2 %∼35.8 %). The underlying reasons were revealed by systematically investigating the effects of the single and combined pretreatment strategies on substrate properties. Moreover, the Tween 80 addition successfully reversed the adverse effects of combined pretreatment on the enzymatic hydrolysis, achieving a high glucose yield of 99.3 % at an enzyme loading of 10 filter paper units/g (FPU/g) glucan. These results deepen the understanding of the synergy of combined pretreatment on biomass fractionation and enzymatic saccharification.

Development of super dimensional stable poplar structure with fire and mildew resistance by delignification/densification of wood with highly aligned cellulose molecules.

Wood is one of the most popular materials for construction purposes because of its environmentally friendly and sustainable characteristics. However, the use of wood is constrained by the lengthy time it takes for trees to mature. Consequently, fast-growing wood species have become popular as substitute options due to their ability to rapidly reach maturity and high yields. Although the problem of low density and strength has been effectively addressed in recent years by densifying wood, the problem of large thickness swelling due to moisture and water absorption has limited its application. Therefore, we reported an effective modification strategy to overcome the thickness swelling issue of densified wood by preparing a cellulosic reinforced material through the synergistic action of alkaline chemical pretreatment, multi-step cyclic impregnation and high-temperature densification. The results showed that the alkaline chemical pretreatment was effective for removing a large amount of lignin and hemicelluloses, creating a large number of hydrogen bonds among the remaining strong celluloses. The impregnated sodium silicate solution bonded celluloses tightly, and the densification treatment contributed to the production of Si-O-Si structure, forming the shuttle hybridized structure through Si-O-C bonds. The hardness, flexural strength, elastic modulus, and compressive strength of the modified wood increased by 3.9, 6.0, 3.4 and 28.2 times, respectively. In addition, 0 % thickness swelling for 30-day moisture absorption and 1.0 % thickness swelling for 72-hour water absorption were achieved, realizing super dimensional-stable poplar structures. Furthermore, the high-performance densified wood prepared by this method has excellent fire and mildew resistance properties, which lays the foundation for the application of fast-growing wood in outdoor engineering structures.

Lithium and strontium accumulation in native and invasive plants of the Sava River: Implications for bioindication and phytoremediation.

The objective of this study was to investigate the potential of native and invasive plant species for the uptake and accumulation of lithium (Li) and strontium (Sr) along the Sava River, focusing on their bioindication and phytoremediation capabilities. Sampling was carried out in riparian zones exposed to different pollution sources in Slovenia, Croatia, and Serbia. Plant samples of native (Salix alba, Populus alba, Populus nigra, Ulmus glabra, Juglans regia) and invasive (Amorpha fruticosa, Reynoutria japonica, Solidago canadensis, Impatiens glandulifera) species were collected. The content of Li and Sr was analyzed in the soils, roots, and leaves of the selected plants, as well as physical and chemical soil properties. Both Li and Sr content in the soils increased from the source to the mouth of the Sava River. The native species showed significant potential for Li and Sr accumulation based on the metal accumulation index. The highest Sr accumulation was measured in the leaves of Salix alba and the roots of Juglans regia, while the highest Li accumulation was measured in Ulmus glabra. Native species, especially Salix alba, proved to be better bioindicators of Li and Sr. Invasive species, especially Amorpha fruticosa and Impatiens glandulifera, showed a remarkable ability to translocate Sr and Li, respectively, to leaves. These results provide valuable insight into the suitability of plants for biomonitoring soil contamination and potential applications in phytoremediation strategies. In summary, the study shows the importance of native species in the context of the accumulation and bioindication of soil pollution.

Enhancing biomass conversion: Efficient hemicellulose removal and cellulose saccharification in poplar with FeCl3 coupled with acidic electrolyzed water pretreatment.

Due to the recalcitrant structure of woody biomass such as poplar, the efficient disassembly and separation of hemicellulose component from woody biomass is crucial for green biomass processing and full component utilization. This study presented an environmentally friendly approach to utilize acidic electrolyzed water (AEW) combined with metal salts and investigated its pretreatment effects on hemicellulose removal and cellulose and lignin retention under different conditions. Meanwhile, the structural properties and enzymatic hydrolysis performance of the pretreated residues were also characterized. As a result, under the optimized pretreatment conditions (0.03 mol/L FeCl3 with AEW at 180 °C for 10 min), hemicellulose removal from poplar wood reached 98.64 %, accompanied by xylose recovery rate of 98.46 %, cellulose retention rate of 93.43 % and lignin retention rate of 94.29 %. Enzymatic hydrolysis rate of the pretreated cellulose-enriched substrate reached 97.65 %. Furthermore, comprehensive structural characterizations revealed that FeCl3 coupled with AEW pretreatment resulted in surface damage to the poplar wood, effective removal of the amorphous hemicellulose component, and partial destruction of the cellulose crystallinity. In conclusion, FeCl3 coupled with AEW pretreatment effectively separates hemicellulose, leading to significant alterations in biomass composition and structure, ultimately resulting in improved enzymatic digestion. These results provide theoretical support for targeted dissociation of hemicellulose and full component utilization of woody biomass.

Chemical Composition, Antioxidant Activity, and Antibacterial Activity of Black Poplar Buds' Hydroalcoholic Macerates from Dobrogea Area.

Black poplar buds have high contents of many compounds with therapeutic potential, which are useful in cosmetics and the treatment of various dermatitis, respiratory diseases, etc. The aim of this study was to identify and exploit the local plant resources with biologically active properties from the Dobrogea area, Romania. For this purpose, materials were collected from the mentioned area, and macerates of black poplar were prepared in order to evaluate their qualities as antioxidant and antimicrobial agents. Three different black poplar buds' hydroalcoholic macerates were analyzed by the Folin-Ciocâlteau method to estimate the total content of phenolic compounds, by the HPLC-DAD method for identification and quantification of the main bioactive compounds and by the DPPH radical scavenging method to evaluate the antioxidant activity. All hydroalcoholic macerates showed high concentrations of phenolic compounds, the main individual compounds being gallic acid, chlorogenic acid, cinnamic acid, and methyl gallic acid. The antioxidant activity of the black poplar buds' hydroalcoholic macerates, evaluated by the DPPH radical scavenging test, showed high values, between 496 and 1200 mg GAE /100 g d.w. The Cd, Cu, Zn, Ni, and Pb concentrations released in dry poplar buds, determined by AAS, were below the detection limits. Hydroalcoholic macerates of black poplar were tested against two groups of gram-positive bacteria (Enterococcus and Staphylococcus) using an agar well diffusion assay. The in vitro inhibitory activities of the macerates were important and ranged from 8.2-9.4 mm inhibition zones (Staphylococcus) to 8.6 -10 mm inhibition zones (Enterococcus).

Environment and Genotype Influence Quantitative and Qualitative Variation in Condensed Tannins in Aspen.

Condensed tannins (CTs) are abundant, ecologically-relevant secondary metabolites in many plants, which respond to variables associated with anthropogenic environmental change. While many studies have reported how genetic and environmental factors affect CT concentrations, few have explored how they influence CT molecular structure. Here, using trembling aspen (Populus tremuloides) as a model organism, we report how foliar CT concentrations, polymer sizes, representation of procyanidins and prodelphinidins, and stereochemistry vary in response to changes in air temperature (warming and freeze damage), air composition (elevated CO2 and O3), soil quality (nutrients and microbiome), and herbivory (mammal and lepidopteran). Use of multiple aspen genotypes enabled assessment of genetic influences on aspen CTs. CT concentration and composition were analyzed by thiolysis-ultra high performance liquid chromatography/mass spectrometry in archived leaf samples from prior experiments. All environmental variables explored except for soil microbiome influenced both CT quantity and quality, with climate factors appearing to have larger effect magnitudes than herbivory. Climate, soil, and herbivory effects varied among genotypes, while air composition effects were consistent across genotypes. Considering that CT properties (concentrations and molecular structures) mediate functions at the organismal through ecosystem scales, intraspecific variation in responses of CT properties to environmental factors could provide a pathway through which environmental change exerts selective pressure on Populus populations. Future studies are needed to identify the molecular-level mechanisms by which environmental factors influence CT concentrations and structures, and to establish their ecological and evolutionary significance.

Reductive Conversion Leads to Detoxification of Salicortin-like Chemical Defenses (Salicortinoids) in Lepidopteran Specialist Herbivores (Notodontidae).

Lepidopteran specialist herbivores of the Notodontidae family have adapted to thrive on poplar and willow species (Salicaceae). Previous research showed that Cerura vinula, a member of the Notodontidae family occurring throughout Europe and Asia, uses a unique mechanism to transform salicortinoids, the host plant's defense compounds, into quinic acid-salicylate conjugates. However, how the production of this conjugates relates to the detoxification of salicortinoids and how this transformation proceeds mechanistically have remained unknown. To find the mechanisms, we conducted gut homogenate incubation experiments with C. vinula and re-examined its metabolism by analyzing the constituents of its frass. To estimate the contribution of spontaneous degradation, we examined the chemical stability of salicortinoids and found that salicortinoids were degraded very quickly by midgut homogenates and that spontaneous degradation plays only a marginal role in the metabolism. We learned how salicortinoids are transformed into salicylate after we discovered reductively transformed derivatives, which were revealed to play key roles in the metabolism. Unless they have undergone the process of reduction, salicortinoids produce toxic catechol. We also studied constituents in the frass of the Notodontidae species Cerura erminea, Clostera anachoreta, Furcula furcula, Notodonta ziczac, and Pheosia tremula, and found the same metabolites as those described for C. vinula. We conclude that the process whereby salicortinoids are reductively transformed represents an important adaption of the Notodontidae to their Salicaceae host species.

Comprehensive estrogenic/anti-estrogenic, anticancer, mutagenic/anti-mutagenic, and genotoxic/anti-genotoxic activity studies on chemically characterized black poplar and Eurasian aspen propolis types.

Propolis is mainly composed of plant resins, and its type is named according to the primary plant origin in its composition. Identification of propolis botanical origin is essential for predicting and repeating its pharmacological activity because of the variations in chemical composition. This study aimed to compare chemical composition of black poplar (Populus nigra L.) type-propolis (PR1 and PR2) and Eurasian aspen (P. tremula L.)-type propolis (PR3) by liquid chromatography-tandem mass spectrometry (LC-MS/MS) technique and to evaluate their biological activity profiles. According to LC-MS/MS results, in addition to marked caffeic acid phenethyl ester content in PR1 and PR2, flavonoid aglycones such as pinocembrin, chrysin, pinobanksin, and galangin were found to be dominant in these samples. On the other hand, PR3 contained relatively high concentrations of phenolic acids such as ferulic acid, p-coumaric acid, and trans-cinnamic acid. The anti-estrogenic activity test showed that PR2 exerted the highest anti-estrogenic activity by inhibiting cell proliferation by 44.6%. All propolis extracts showed anticancer activity, which was justified by decreasing activity on the 3D spheroid size in a concentration-dependent manner. Besides, all extracts showed moderate or potent antimutagenic activity in Salmonella typhimurium TA98 and TA100 strains with and without metabolic activation, respectively. In addition, the Comet assay results revealed that propolis extracts have a geno-protective effect against H2O2-induced DNA damage in CHO-K1 cells at 0.625 and 1.25 µg/mL concentrations. Overall, the result of this study may help in preparing standardized propolis extracts and developing products with defined pharmacological benefits in the food supplements industry.