Arthroscopic reduction and hollow screw internal fixation for Eyres Type IIIA scapular coracoid fracture: a case report.

BACKGROUND: A coracoid process fracture combined with an acromioclavicular (AC) joint dislocation is an uncommon injury that typically causes significant pain and limits shoulder movement. Open reduction and internal fixation have been the traditional treatment approach. However, arthroscopic techniques are emerging as a promising alternative for managing these injuries. CASE REPRESENTATION: A 35-year-old woman presented with right shoulder pain following an accidental fall. Imaging studies revealed a coracoid process fracture along with an AC joint dislocation. The fracture was classified as an Eyres Type IIIA, which warranted surgical intervention. Our team performed arthroscopic coracoid fracture reduction and internal fixation surgery, as well as AC joint dislocation repair using Kirschner wires. Six months after surgery, the patient demonstrated a satisfactory functional outcome with complete bone healing. CONCLUSION: This case report highlights the potential of arthroscopic reduction and fixation as a novel treatment option for fractures of the coracoid base.

Three-Dimensional Morphological Analysis of the Suprascapular Notch in Patients with Arthroscopic Rotator Cuff Repair.

Background: The morphology of the suprascapular notch (SSN) and the ossification of the superior transverse suprascapular ligament (STSL) are risk factors for injury of the suprascapular nerve (SN) during arthroscopic shoulder procedures. The purpose of the current study was to compare preoperative clinical and radiologic characteristics between patients with and without STSL ossification and to evaluate SSN morphology in patients who underwent arthroscopic rotator cuff repair using a 3-dimensional (3D) reconstructed model. Methods: Patients who underwent arthroscopic rotator cuff repair and were given a computed tomography (CT) scan from March 2018 to August 2019 were included in this study. Patients were divided into 2 groups: those without STSL ossification (group I) and those with STSL ossification (group II). Tear size of the rotator cuff and fatty infiltration of rotator cuff muscles were assessed in preoperative magnetic resonance imaging. The morphology of the SSN was classified following Rengachary's classification. The transverse and vertical diameters of the SSN and the distances from anatomical landmarks to the STSL were measured. All measurements were completed using a 3D CT reconstructed scapula model. Results: A total of 200 patients were included in this study. One hundred seventy-eight patients (89.0%) without STSL ossification were included in group I, and 22 patients (11.0%) with STSL ossification were included in group II. Group II showed a significantly advanced age (61.0 ± 7.4 vs. 71.0 ± 7.3 years, p < 0.001) and a shorter transverse diameter of SSN (10.7 ± 3.1 mm vs. 6.1 ± 3.7 mm, p < 0.001) than group I. In the logistic regression analysis, age was an independent prognostic factor for STSL ossification (odds ratio, 1.201; 95% confidence interval, 1.112-1.296; p < 0.001). Patients in type VI showed significantly shorter transverse diameters than other types (p < 0.001). The patient with type I showed a significantly shorter distance from the articular surface of the glenoid to the SSN than those with other types (p < 0.001). Conclusions: In the 3D morphological analysis, age was the independent factor associated with STSL ossification in patients who underwent arthroscopic rotator cuff repair. Type VI showed significantly shorter transverse diameters than other types. Type I showed a significantly shorter distance from the articular surface of the glenoid to the SSN than other types.

Effect of Glenoid Bone Loss and Shoulder Position on Axillary Nerve Anatomy During the Latarjet Procedure.

BACKGROUND: The Latarjet procedure is increasingly being utilized for the treatment of glenoid bone loss and has a relatively high neurological complication rate. Understanding the position-dependent anatomy of the axillary nerve (AN) is crucial to preventing injuries. PURPOSE: To quantify the effects of changes in the shoulder position and degree of glenoid bone loss during the Latarjet procedure on the position of the AN. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 10 cadaveric shoulders were dissected, leaving the tendons of the rotator cuff and deltoid for muscle loading. The 3-dimensional position of the AN was quantified relative to the inferior glenoid under 3 conditions: (1) intact shoulder, (2) Latarjet procedure with 15% bone loss, and (3) Latarjet procedure with 30% bone loss. Measurements were obtained at 0°, 30°, and 60° of glenohumeral abduction (equivalent to 0°, 45°, and 90° of shoulder abduction) and at 0°, 45°, and 90° of humeral external rotation (ER). RESULTS: Abduction of the shoulder to 60° resulted in a posterior (9.5 ± 1.1 mm; P < .001), superior (3.0 ± 1.2 mm; P = .013), and lateral (19.1 ± 2.3 mm; P < .001) shift of the AN, and ER to 90° resulted in anterior translation (10.0 ± 1.2 mm; P < .001). Overall, ER increased the minimum AN-glenoid distance at 30° of abduction (14.9 ± 1.3 mm [0° of ER] vs 17.3 ± 1.5 mm [90° of ER]; P = .045). The Latarjet procedure with both 15 and 30% glenoid bone loss resulted in a superior and medial shift of the AN relative to the intact state. A decreased minimum AN-glenoid distance was seen after the Latarjet procedure with 30% bone loss at 60° abduction and 90° ER (17.7 ± 1.6 mm [intact] vs 13.9 ± 1.6 mm [30% bone loss]; P = .007), but no significant differences were seen after the Latarjet procedure with 15% bone loss. CONCLUSION: Abduction of the shoulder induced a superior, lateral, and posterior shift of the AN, and ER caused anterior translation. Interestingly, the Latarjet procedure, when performed on shoulders with extensive glenoid bone loss, significantly reduced the minimum AN-glenoid distance during shoulder abduction and ER. These novel findings imply that patients with substantial glenoid bone loss may be at a higher risk of AN injuries during critical portions of the procedure. Consequently, it is imperative that surgeons account for alterations in nerve anatomy during revision procedures. CLINICAL RELEVANCE: This study attempts to improve understanding of the position-dependent effect of shoulder position and glenoid bone loss after the Latarjet procedure on AN anatomy. Improved knowledge of AN anatomy is crucial to preventing potentially devastating AN injuries during the Latarjet procedure.

Dynamic Scapular Winging Caused by Long Thoracic Nerve Compression due to Scapular Osteochondroma: A Case Report.

CASE: We report a unique case of dynamic scapular winging due to compression of the long thoracic nerve by a ventral scapular osteochondroma, representing a combination of mechanical and neural causes. Arthroscopic resection of the lesion was performed, which led to complete resolution of the symptoms. CONCLUSION: By reporting this case, we aimed to increase awareness of the importance of a correct etiological diagnosis of dynamic scapular winging, so that targeted treatment can be addressed. Arthroscopic resection seems ideal for this indication because it reduces the risk of complications and patient recovery time.

Early Clinical Efficacy of Small Incision Reduction and Superior Closed Pin Fixation of Goss-Ideberg Type III Glenoid Fractures using X-ray and CT Scan.

BACKGROUND: Imaging techniques such as X-rays and 3D Computed Tomography (CT) are used to diagnose and evaluate a patient's shoulder before and after surgery. Identifying the kind, location, and severity of a shoulder fracture helps surgeons choose the right treatment and surgery. OBJECTIVES: The study examines the effectiveness of small incision reduction and superior closure pinning in treating Ideberg type III glenoid fractures identified by X-ray and CT scans. MATERIALS AND METHODS: From October 2017 to June 2022, 40 patients with Ideberg type III glenoid fractures underwent mini-incision reduction and superior closed pinning fixation using the Anterior (AA) and Posterior (PA) approaches. Pre- and post-surgery shoulder scores and imaging data were analyzed. Outpatient review and shoulder anteroposterior radiographs were collected at 1, 3, 6, and 12 months after surgery. We assessed shoulder joint function using the American Shoulder and Elbow Society (ASES) shoulder score, VAS score, Constant-Murley Shoulder Outcome (Constant) score, and DASH score. RESULTS: A total of 40 patients were monitored for 14-16 months, averaging 15.2 ± 0.3 months. All fractures were healed between 14-25 weeks from X-rays, averaging 17.6 ± 5.4 weeks. Both the AA and PA groups had similar shoulder score changes. However, the AA group did better. In all cases, ASES shoulder scores were outstanding at 80%. Radiographs demonstratedno traumatic arthritis or internal fixation failure consequences like screw loosening or breakage. CONCLUSION: It was concluded that Ideberg type III glenoid fracture reduction with an anterior small incision and superior closed pinning hollow lag screw internal fixation could be successful.

Finite element analysis of the treatment of a minimally invasive approach combined with a novel anatomical locking plate for scapular body fractures.

BACKGROUND: The minimally invasive approach for the treatment of displaced scapular neck or body fractures has the advantages of less trauma and minimal muscle dissection. In clinical practice, the minimally invasive approach combined with an anatomical locking plate has been used to treat scapular body fractures. In addition, we have made minor modifications to the minimally invasive approach. However, the biomechanical study about the approach combined with an anatomical locking plate in treating scapular body fractures was limited. METHODS: Finite element analysis (FEA) was used to conduct the biomechanical comparison between the anatomical locking plate (AP model) and reconstructive plate (RP model) in the treatment of scapular body fractures through the modified minimally invasive approach. A healthy male volunteer with no history of scapula or systemic diseases was recruited. High-resolution computed tomography images of his right scapula were obtained. Two scapula models were constructed and analyzed by the software of Mimics 21.0, Geomagic Wrap 2021, SolidWorks 2021, and ANSYS Workbench 2022, respectively. RESULTS: Through static structural analysis, in terms of equivalent von Mises stress, equivalent elastic strain, and total deformation, the AP model exhibited superior safety characteristics, enhanced flexibility, and anticipated stability compared with the RP model. This was evidenced by lower maximum stress, lower maximum strain and displacement. CONCLUSION: The minimally invasive approach combined with an anatomical locking plate for scapular body fractures had better biomechanical stability. The study provided a biomechanical basis to guide the clinical treatment of scapular body fractures.

The Scapular Skiver Screw: A Useful Fixation Technique for Inferior Glenoid and Scapular Neck Fractures.

SUMMARY: The inferior glenoid and scapular neck are common locations for scapular fractures. Operative exposures for reduction and fixation can be challenging, and frequently, the proximal fracture planes are not conducive to optimal fixation with a plate alone. The purpose of this article was to describe a new technique for enhancing fixation in specific inferior glenoid fractures using a single cortical lag screw.

[Effectiveness analysis of double EndoButton suture fixation Latarjet procedure for treatment of anterior shoulder dislocation with glenoid bone defect caused by military training injuries].

Objective: To investigate the effectiveness of double EndoButton suture fixation Latarjet procedure in the treatment of shoulder anterior dislocation with glenoid bone defect caused by military training injuries. Methods: The clinical data of 14 patients with anterior shoulder dislocation with glenoid bone defect due to military training injuries who met the selection criteria and admitted between August 2021 and December 2022 were retrospectively analyzed. All patients were male, the age ranged from 21 to 38 years, with an average of 26.8 years. The time from initial dislocation to operation was 6-15 months, with an average of 10.2 months. Anterior shoulder dislocation occurred 5-12 times, with an average of 8.2 times. All glenoid bone defects were more than 10%, including 5 cases of 10%-15%, 8 cases of 15%-20%, and 1 case of 24%. All patients were treated by double EndoButton suture fixation Latarjet procedure. The operation time and complications were recorded. The shoulder function and pain were evaluated by the American Association for Shoulder and Elbow Surgery (ASES) score, Rowe score, Instability Severity Index Score (ISIS), and visual analogue scale (VAS) score before and after operation. The range of motion of the shoulder was recorded, including forward flexion, 0° external rotation, and abduction 90° external rotation. The position, healing, and resorption of the bone mass were evaluated by three-dimensional CT of shoulder joint after operation. Results: All patients successfully completed the operation, and the operation time was 100-150 minutes, with an average of 119.7 minutes. There was no complications such as infection, vascular and nerve injury. All patients were followed up 12-20 months, with an average of 15.6 months. During the follow-up, 4 patients had bone mass separation, absorption, and recurrent anterior dislocation, and the shoulder joint fear test was positive. Imaging of the remaining patients showed that the bone mass healed well, no anterior dislocation recurrence occurred, and the healing time was 3-7 months (mean, 4.7 months). At last follow-up, the range of motion, ASES score, Rowe score, ISIS score, and VAS score of the patients significantly improved when compared with those before operation ( P<0.05). Conclusion: The effectiveness of double EndoButton suture fixation Latarjet procedure for the treatment of anterior shoulder dislocation with glenoid bone defect caused by military training injury is satisfactory.

[The "E-bone" - a one-stop preoperative planning system for reverse total shoulder arthroplasty].

OBJECTIVE: To develop the'E-Bone', a comprehensive one-stop preoperative planning system for reverse total shoulder arthroplasty with improved accuracy and efficiency. METHODS: The nnU-net deep neural network was utilized for scapula segmentation to obtain precise scapula segmentation results. Based on the 3 key factors, namely bone density, upward and downward angle and nail length, the base was automatically positioned. The quantitative parameters required for surgical planning were calculated. A personalized guide plate was generated by combining glenoid morphology and base positioning information. The system interface was developed to modularize various functions for easy use, providing interactive operation and real-time display. RESULTS: Compared with the Mimics system, the'E-bone'preoperative planning system reduced complex manual adjustments during the planning process. The average planned nail length was longer than that of the Mimics system, and the planning time was reduced by 86%. The scapula segmentation accuracy of this system reached 99.93%, better than that of Mimics to achieve a higher precision. CONCLUSION: The"E-bone"system provides a one-stop, efficient, and accurate preoperative planning system for reverse shoulder replacement and potentially broader clinical applications.

A rare presentation of a large suprascapular fossa lipoma causing suprascapular nerve traction injury leading to massive rotator cuff tear, treated arthroscopically - case report.

Suprascapular fossa lipoma extending to the suprascapular notch causing traction injury to the suprascapular nerve is a rare presentation. We report a 47-year-old male with progressive weakness of the right shoulder joint of 8 months duration, with a palpable mass over the spine of the scapula was noticed 2 months earlier and developed a sudden drop in arm following a moderate strain. A magnetic resonance imaging (MRI) scan revealed a rotator cuff tear involving the supraspinatus and infraspinatus muscles with a tumor like lesion in the suprascapular fossa, displacing the suprascapular muscle mass and extending into the suprascapular notch. Electromyography and nerve conduction velocity studies revealed suprascapular neuropathy. After histopathologic confirmation, an arthroscopic excision of the mass with decompression of the suprascapular notch was performed along with repair of the rotator cuff. Six months after the procedure, the patient had improved considerably in terms of function and postoperative MRI revealed a complete excision of the mass, and further follow-up of 2 years showed no recurrence. Suprascapular nerve entrapment can be caused by a lipoma in the shoulder, leading to weakness, atrophy, and consequent tear of the rotator cuff tendons. Arthroscopic management, after histopathological confirmation, gives good results in this situation. LEVEL OF EVIDENCE: Level IV.

Scapula fractures: functional anatomy, clinical assessment and management.

Fractures of the scapula are rare injuries, accounting for 3-5% of all shoulder girdle fractures. They are frequently the result of high energy trauma and often present with concurrent and life-threatening injuries to adjacent structures, leading to significant morbidity and mortality. Patients presenting with scapula fractures must receive a thorough and systematic clinical assessment as directed by national trauma guidelines. Appropriate imaging is essential in delineating fracture morphology and should at the very least include anteroposterior, anteroposterior oblique (Grashey) and axillary or scapula 'Y' view of the shoulder. Computed tomography imaging with three-dimensional reconstruction allows better delineation of the fracture morphology and helps with surgical planning. A lack of randomised controlled trials comparing the efficacy of conservative and operative management of scapula fractures has resulted in limited consensus for surgical indications. Nevertheless, most extra-articular fractures can be managed conservatively while intra-articular fractures of the glenoid frequently require surgical fixation.

Lateralising reverse shoulder arthroplasty using bony increased offset (BIO-RSA) or increasing glenoid component diameter: comparison of clinical, radiographic and patient reported outcomes in a matched cohort.

BACKGROUND: This study aims to compare the range of motion (ROM) of reverse shoulder arthroplasty lateralised by bony increased offset (BIO-RSA) using a standard 38-mm (mm) component to regular reverse shoulder arthroplasty (RSA) lateralised by using a 42-mm glenoid component. The secondary aims are to compare patient-reported and radiographic outcomes between the two groups. MATERIALS AND METHODS: All patients with a BIO-RSA and size 38 glenosphere were retrospectively identified and matched to patients with a regular RSA and size 42 glenosphere. Matched patients were invited for a follow-up visit. ROM was assessed as well as radiographic outcomes (lateralisation, distalisation, inferior overhang, scapular notching, heterotopic bone formation, radiolucency, stress shielding, bone graft healing and viability and complications) and patient-reported outcomes (subjective shoulder value, Constant score, American Shoulder and Elbow Surgeons, activities of daily living which require internal rotation, activities of daily living which require external rotation and a visual analogue scale for pain). Outcomes were compared between the two groups. RESULTS: In total, 38 BIO-RSAs with a size 38 glenosphere were matched to 38 regular RSAs with a size 42 glenosphere. Of the 76 matched patients, 74 could be contacted and 70 (95%) were included. At the final follow-up, there were no differences between the two groups in ROM, patient-reported outcomes or radiographic outcomes (p > 0.485). CONCLUSIONS: Using a larger glenosphere is a feasible alternative to BIO-RSA for lateralising RSA, providing comparable ROM, patient-reported and radiographic results, while potentially decreasing costs, operative time and complication rates.

The Effects of Pulmonary Risk Factors and Combination Thoracic Osseous Fractures on Mortality and Outcomes of Surgical Stabilization of Rib Fractures.

BACKGROUND: Rib fixation for traumatic rib fractures is advocated to decrease morbidity and mortality in select patient populations. We intended to investigate the effect of combination osseous thoracic injuries on mortality with the hypothesis that combination injuries will worsen overall mortality and that SSRF will improve outcomes in combination injuries and in high-risk patients. METHODS: Patients with rib fractures were identified from the Trauma Quality Improvement Project registry from 2019. Patients were then divided into rib fracture(s) alone or in combination with sternal, thoracic vertebra, or scapula fracture. Patients were also categorized into those with COPD and smokers. Patients with AIS >3 outside of thorax were excluded. Patients were subcategorized into those who had rib fixation verse nonoperative management for all subgroups. Analysis was performed to evaluate the efficacy of rib fixation. RESULTS: A total of 111,066 patients were included for analysis. The overall mortality was 1.4%. Patients with COPD had over double the mortality risk, with an overall mortality of 3.4%. Combination injuries did not appear to increase mortality. SSRF did not decrease mortality; however, the number of patients in this group was too small to complete statistical analysis. The overall complication rate was 0.43%. There was a trend towards an increase in extrapulmonary complications in the group that underwent surgical fixation. DISCUSSION: Mortality from rib fractures with concomitant osseous thoracic fracture appears to be low. However, mortality is increased in patients with COPD regardless of rib fracture pattern. The number of patients who underwent SSRF was too small to make a statistical comparison.

Minimum 5-Year Clinical and Return-to-Sport Outcomes After Primary Arthroscopic Scapulothoracic Bursectomy and Partial Scapulectomy for Snapping Scapula Syndrome.

BACKGROUND: Snapping scapula syndrome (SSS) is a rare condition that is oftentimes debilitating. For patients whose symptoms are resistant to nonoperative treatment, arthroscopic surgery may offer relief. Because of the rarity of SSS, reports of clinical outcomes after arthroscopic SSS surgery are primarily limited to small case series and short-term follow-up studies. PURPOSE: To report minimum 5-year clinical and sport-specific outcomes after arthroscopic bursectomy and partial scapulectomy for SSS and to identify demographic and clinical factors at baseline associated with clinical outcomes at minimum 5-year follow-up. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: Patients who underwent arthroscopic bursectomy and partial scapulectomy for SSS between October 2005 and February 2016 with a minimum of 5 years of postoperative follow-up were enrolled in this single-center study. Clinical outcome scores, including the 12-Item Short Form Health Survey (SF-12), American Shoulder and Elbow Surgeons (ASES) Shoulder Score, shortened version of the Disabilities of the Arm, Shoulder and Hand (QuickDASH) score, Single Assessment Numeric Evaluation (SANE), and visual analog scale (VAS) score for pain, were collected at a minimum 5-year follow-up. Additionally, it was determined which patients reached the minimal clinically important difference. Bivariate analysis was used to determine whether baseline demographic and clinical factors had any association with the outcome scores. RESULTS: Of 81 patients eligible for inclusion in the study, follow-up was obtained for 66 patients (age 33.6 ± 13.3 years; 31 female). At a mean follow-up of 8.9 ± 2.5 years (range, 5.0-15.4 years), all of the outcome scores significantly improved compared with baseline. These included the ASES (from 56.7 ± 14.5 at baseline to 87.2 ± 13.9 at follow-up; P < .001), QuickDASH (from 38.7 ± 17.6 to 13.1 ± 14.6; P < .001), SANE (from 52.4 ± 21.2 to 82.7 ± 19.9; P < .001), SF-12 Physical Component Summary (from 39.7 ± 8.3 to 50.3 ± 8.2; P < .001), SF-12 Mental Component Summary (from 48.2 ± 11.7 to 52.0 ± 9.0; P = 0.014) and VAS pain (from 5.2 ± 2.1 to 1.4 ± 2.0; P < .001). The minimal clinically important difference in the ASES score was reached by 77.6% of the patients. Median postoperative satisfaction was 8 out of 10. It was found that 90.5% of the patients returned to sport, with 73.8% of the patients able to return to their preinjury level. At the time of final follow-up, 8 (12.1%) patients had undergone revision surgery for recurrent SSS symptoms. Older age at surgery (P = .044), lower preoperative SF-12 Mental Component Summary score (P = .008), lower preoperative ASES score (P = .019), and increased preoperative VAS pain score (P = .016) were significantly associated with not achieving a Patient Acceptable Symptom State on the ASES score. CONCLUSION: Patients undergoing arthroscopic bursectomy and partial scapulectomy for SSS experienced clinically significant improvements in functional scores, pain, and quality of life, which were sustained at a minimum of 5 years and a mean follow-up of 8.9 years postoperatively. Higher patient age, inferior mental health status, increased shoulder pain, and lower ASES scores at baseline were significantly associated with worse postoperative outcomes.

Treatment options and outcomes for delayed scapular anatomical neck fractures: a case report and review of the literature.

INTRODUCTION: Scapular anatomical neck fractures are among the most infrequent shoulder girdle fractures. Only seven radiologically confirmed cases of scapular anatomical neck fractures have been documented in the literature to date, of which only one case underwent delayed surgery. CASE PRESENTATION: A 34-year-old male Persian patient with morbid obesity was diagnosed with a scapula anatomical neck fracture after a motor vehicle collision. The radiographic assessment of the patient indicated an increase in the scapular glenopolar angle (73.9°). Due to concurrent chest and head injuries, surgical intervention was deferred until 6 weeks following the injury. The posterolateral limited Dupont-Evrard approach was used because of the patient's extremely high body mass index. Two plates were utilized to achieve stable fixation of the glenoid neck fracture. Following a 1 year follow-up period, complete fracture union was successfully attained, resulting in a constant score of 79. CONCLUSIONS: The most accurate radiographic indicators of these fractures are a superior fracture line located laterally to the coracoid process, a small inferior spike, and an elevated glenopolar angle. The only tendon attached to the glenoid is the long head of the triceps, making these fractures unstable; therefore, surgery is required in the majority of instances. The small size of the fractured component makes stabilization more difficult. Overall, anatomical scapular neck fractures are extremely uncommon and distinguished from other scapular fractures by their unique radiological and biomechanical characteristics. This case highlights the challenges encountered when managing scapular fractures in patients with morbid obesity. The delayed surgical intervention and the choice of surgical approach tailored to the patient's specific anatomical and physiological considerations proved to be effective in achieving a favorable outcome.

Risk of suprascapular nerve injury in open Trillat procedure: an anatomical study.

PURPOSE: The open Trillat Procedure described to treat recurrent shoulder instability, has a renewed interest with the advent of arthroscopy. The suprascapular nerve (SSN) is theoretically at risk during the drilling of the scapula near the spinoglenoid notch. The purpose of this study was to assess the relationship between the screw securing the coracoid transfer and the SSN during open Trillat Procedure and define a safe zone for the SSN. METHODS: In this anatomical study, an open Trillat Procedure was performed on ten shoulders specimens. The coracoid was fixed by a screw after partial osteotomy and antero-posterior drilling of the scapular neck. The SSN was dissected with identification of the screw. We measured the distances SSN-screw (distance 1) and SSN-glenoid rim (distance 2). In axial plane, we measured the angles between the glenoid plane and the screw (α angle) and between the glenoid plane and the SSN (ß angle). RESULTS: The mean distance SSN-screw was 8.8 mm +/-5.4 (0-15). Mean α angle was 11°+/-2.4 (8-15). Mean ß angle was 22°+/-6.7 (12-30). No macroscopic lesion of the SSN was recorded but in 20% (2 cases), the screw was in contact with the nerve. In both cases, the ß angle was measured at 12°. CONCLUSION: During the open Trillat Procedure, the SSN can be injured due to its anatomical location. Placement of the screw should be within 10° of the glenoid plane to minimize the risk of SSN injury and could require the use of a specific guide or arthroscopic-assisted surgery.

The latissimus dorsi creates a dynamic track for the inferior angle of the scapula during arm abduction in humans.

BACKGROUND: The importance of several scapulothoracic muscles, including trapezius and serratus anterior, in maintaining physiological scapula kinematics has been highlighted in the past. However, the relationship between the scapula and the latissimus dorsi muscle remains unclear. Our clinical surgical observation is that the latissimus dorsi does not directly attach but rather runs superficial to the inferior angle of the scapula. Based on this observation, we hypothesise that the latissimus dorsi creates a dynamic track on which the scapula glides under the muscle belly during elevation of the arm, creating the latissimus-scapula overlap (LSO). METHODS: All consecutive patients who had a whole-body computed tomography scan (CT) in case of polytrauma evaluation between 2018 and 2021, with complete depiction of the scapula and latissimus dorsi muscle, were analysed. 150 shoulders in 90 patients with arms up were matched according to their age (within five years), gender, and affected side with 150 shoulders in 88 patients with arms down. Patients with pathologies of the upper extremities or thorax that potentially could alter LSO measurements were excluded. LSO was calculated as a ratio of the measured area of the latissimus dorsi projection on the scapula and the total scapula area. RESULTS: The mean age of the 178 patients (48 females; 13 males) was 60 years. The arms-up group showed a significantly higher LSO than the arms-down group (19.9 ± 6.3% vs. 2.7 ± 2.2%; p < 0.0001). In the arms-up group, approximately one fifth of the scapula was overlapped inferiorly by the muscle belly of the latissimus dorsi, contrary to the almost non-existing LSO in the arms-down group. CONCLUSION: With arms up, humans show a significantly higher LSO in comparison to arms down indicating that the latissimus dorsi indeed creates a dynamic track on which the scapula is forced to travel during abduction of the arm. This finding of increased LSO during the elevation of the arm warrants further consideration of the role of the latissimus dorsi in scapula kinematics and potentially scapular dyskinesis. LEVEL OF EVIDENCE: Level two diagnostic study.

Efficacy and safety of the Latarjet procedure for the treatment of athletes with glenoid bone defects ≥ 20%: a single-arm meta-analysis.

BACKGROUND: The shoulder joint is the most commonly dislocated joint in the human body, and the recurrence rate exceeds 50% after nonsurgical treatment. Although surgical treatment reduces the recurrence rate, there is controversy regarding the optimal surgical approach. Previous studies suggest that the Latarjet procedure yields favourable outcomes for specific populations at risk of recurrence, such as competitive athletes with significant glenoid defects. However, most of the existing related research consists of nonrandomized controlled trials with small sample sizes, and there is a lack of strong evidence regarding the efficacy and safety of the Latarjet procedure. METHODS: The PubMed, Embase, Cochrane Library, and Web of Science databases were systematically searched. Athletes with ≥ 20% glenoid defects were selected for inclusion. The following data were extracted: general patient information, instability rates, return to sports (RTS) rates, imaging features (graft positioning rate and graft healing rate), functional assessments [Rowe score, Athletic Shoulder Outcome Scoring System(ASOSS), visual analogue scale (VAS), forward flexion function, and external rotation function], and complications. RESULTS: After excluding suspected duplicate cases, a total of 5 studies were included in this meta-analysis. The studies involved a total of 255 patients, including 237 males (93%) and 18 females (7%). The average age at the time of surgery was 25.4 ± 8.5 years. All the studies had a minimum follow-up period of 2 years, with an average follow-up time of 48.7 ± 18.9 months. The pooled rate of return to sport (RTS) was 94.3% (95% CI: 87.3%, 98.8%), and 86.1% (95% CI: 78.2%, 92.5%) of patients returned to their preoperative level of activity. The pooled redislocation rate was 1.1% (95% CI: 0%, 3.8%). Regarding the imaging results, the combined graft retention rate was 92.1% (95% CI: 88.1%, 95.5%), and the graft healing rate was 92.1% (95% CI: 88%, 95.4%). Postoperative functional evaluation revealed that the combined Rowe score, ASOSS score, and VAS score were 93.7 ± 6.5 points, 88.5 ± 4.4 points, and 1.1 ± 10 points, respectively. The forward flexion and external rotation angles were 170.9 ± 6.9 degrees and 65.6 ± 4.5 degrees, respectively. After excluding one study with unclear complications, the combined complication rate was 9.4% (95% CI: 1.0%, 23.6%). CONCLUSION: For athletes with shoulder instability and a total of ≥ 20% glenoid bone defects, the Latarjet procedure can achieve excellent functional outcomes, with the majority of patients returning to preoperative levels of sports activity. This procedure also leads to a low recurrence rate. Therefore, the Latarjet procedure has been proven to be a safe and effective treatment.