Characterization of bacteriophages infecting multidrug-resistant uropathogenic Escherichia coli strains.

Uropathogenic Escherichia coli (UPEC) is the most common causative agent of urinary tract infections, and strains that are resistant to antibiotics are a major problem in treating these infections. Phage therapy is a promising alternative approach that can be used to treat infections caused by polyresistant bacterial strains. In the present study, 16 bacteriophages isolated from sewage and surface water were investigated. Phage host specificity was tested on a collection of 77 UPEC strains. The phages infected 2-44 strains, and 80% of the strains were infected by at least one phage. The susceptible E. coli strains belonged predominantly to the B2 phylogenetic group, including strains of two clones, CC131 and CC73, that have a worldwide distribution. All of the phages belonged to class Caudoviricetes and were identified as members of the families Straboviridae, Autographiviridae, and Drexlerviridae and the genera Kagunavirus, Justusliebigvirus, and Murrayvirus. A phage cocktail composed of six phages - four members of the family Straboviridae and two members of the family Autographiviridae - was prepared, and its antibacterial activity was tested in liquid medium. Complete suppression of bacterial growth was observed after 5-22 hours of cultivation, followed by partial regrowth. At 24 hours postinfection, the cocktail suppressed bacterial growth to 43-92% of control values. Similar results were obtained when testing the activity of the phage cocktail in LB and in artificial urine medium. The results indicate that our phage cocktail has potential to inhibit bacterial growth during infection, and they will therefore be preserved in the national phage bank, serving as valuable resources for therapeutic applications.

A bibliometric perspective on the occurrence and migration of microplastics in soils amended with sewage sludge.

The land application of sewage sludge from wastewater treatment plants has been recognized as a major source of microplastic contamination in soil. Nevertheless, the fate and behavior of microplastics in soil remain uncertain, particularly their distribution and transport, which are poorly understood. This study does a bibliometric analysis and visualization of relevant research publications using the CiteSpace software. It explores the limited research available on the topic, highlighting the potential for it to emerge as a research hotspot in the future. Chinese researchers and institutions are paying great attention to this field and are promoting close academic cooperation among international organizations. Current research hot topics mainly involve microplastic pollution caused by the land application of sewage sludge, as well as the detection, environmental fate, and removal of microplastics in soil. The presence of microplastics in sludge, typically ranging from tens of thousands to hundreds of thousands of particles (p)/kg, inevitably leads to their introduction into soil upon land application. In China, the estimated annual accumulation of microplastics in the soil due to sludge use is approximately 1.7 × 1013 p. In European countries, the accumulation ranges from 8.6 to 71 × 1013 p. Sludge application has significantly elevated soil microplastic concentrations, with higher application rates and frequencies resulting in up to several-fold increases. The primary forms of microplastics found in soils treated with sludge are fragments and fibers, primarily in white color. These microplastics consist primarily of components such as polyamide, polyethylene, and polypropylene. The vertical transport behavior of microplastics is influenced by factors such as tillage, wind, rainfall, bioturbation, microplastic characteristics (e.g., fraction, particle size, and shape), and soil physicochemical properties (e.g., organic matter, porosity, electrical conductivity, and pH). Research indicates that microplastics can penetrate up to 90 cm into the soil profile and persist for decades. Microplastics in sewage sludge-amended soils pose potential long-term threats to soil ecosystems and even human health. Future research should focus on expanding the theoretical understanding of microplastic behavior in these soils, enabling the development of comprehensive risk assessments and informed decision-making for sludge management practices. PRACTITIONER POINTS: Microplastics in sewage sludge range from tens to hundreds of thousands per kilogram. Sludge land application contributes significantly to soil microplastic pollution. The main forms of microplastics in sludge-amended soils are fragments and fibers. Microplastics are mainly composed of polyamide, polyethylene, and polypropylene. Microplastics can penetrate up to 90 cm into the soil profile and persist for decades.

Municipal sewage sludge dewatering performance enhancement by ultrasonic cavitation and advanced oxidation: A case study.

The number of published literature on the effect of ultrasonic cavitation and advanced oxidation pretreatment on the dewatering performance of anaerobically digested sludge is very limited. This study aims at determining the optimum operating conditions of large-scale filtering centrifuges in wastewater treatment plants. The optimum dose of hydrogen peroxide, ultrasonic power, ultrasonic duration, ultrasonic pulse and particle size distribution for improved dewatering performance were determined in this study. In addition, shear stress-shear rate and viscosity-shear rate rheograms were developed to show the rheological flow properties for varying ultrasonic power and treatment duration. Optimum sonication power, time, pulse and amplitude were determined to be 14 W, 1 min, 55/5 and 20%, respectively. At a pH of 6.8, the optimum concentration of hydrogen peroxide was found to be 43.5 g/L. The optimum hydrogen peroxide dose in the combined conditioning experiments was determined to be 500 mg/L at a pH of 3. Under these optimum conditions, capillary suction time was reduced significantly by 71.1%. This study helps to reduce polymer consumption and provides the optimum pretreatment and dewatering operating conditions, and better monitoring and control in the dewatering unit has significant impact in the overall economy of wastewater treatment plants.

The feasibility and applicability of sequential extraction of high value-added biogenic materials from sewage sludge.

The sequential extraction routes of biogenic materials from sewage sludge (SS) were investigated. Physical methods (ultrasound, heating) and chemical methods (sodium hydroxide, sodium carbonate) were used to extract extracellular polymeric substances (EPS) and alginate-like extracellular polymers (ALEs) from SS. The residues after extraction were further subjected to physical methods (heating) and chemical methods (sulfuric acid, sodium hydroxide) for protein extraction. A comparison was made between sequential extraction routes and direct extraction of biomaterials from sludge in terms of extraction quantity, material properties, and applicability. The results showed that sequential extraction of biomaterials is feasible. The highest extraction quantities were obtained when using sodium carbonate for EPS and ALE extraction and sodium hydroxide for protein, reaching 449.80 mg/gVSS, 109.78 mg/gVSS, and 5447.08 mg/L, respectively. Sequential extraction procedures facilitate the extraction of biomaterials. Finally, suitable extraction methods for different application scenarios were analyzed.

Nocardioides imazamoxiresistens sp. nov. Isolated from the Activated Sludge.

A Gram-staining-positive actinomycete named YZH12T was isolated from the sediment of the Yangtze River in Nanjing, Jiangsu province, China. Cells were aerobic, non-spore forming, non-motile, short rod (0.4-0.6 × 0.5-1.0 µm) or coccus (0.4-0.6 µm in diameter). Colonies were circular, smooth, and beige to yellowish. Growth occurred at 15-42 °C (optimal 28 °C), pH 5.0-9.0 (optimal 7.0), and 0-10% (w/v) NaCl (optimal 2%). The strain could tolerate 1500 mg/L of imazamox. Strain YZH12T showed 98.7% 16S rRNA gene sequence similarity Nocardioides zeae JM-1068T and less than 97% similarities with other type strains in the genus Nocardioides. Phylogenetic analysis based on genome and 16S rRNA gene sequences indicated that strain YZH12T was phylogenetically affiliated to the genus Nocardioides and formed a subclade with N. zeae JM-1068T and N. alkalitolerans DSM 16699T. The average nucleotide identity (ANI) and digital DNA-DNA hybridization (dDDH) values between YZH12T and closely related type strain N. zeae JM-1068T were 79.9% and 35.2%, respectively. The major fatty acids (> 5%) were C18: 1ω9c, iso-C16: 0, C16: 0, C17: 1ω8cand C18: 0; the major respiratory quinone was MK-8(H4); and the polar lipids profiles were diphosphatidylglycerol (DPG), phosphatidylglycerol (PG), glycolipid (GL), two aminophospholipids (APL1, APL2), and an unknown polar lipid (L). The genomic DNA G + C content is 73.5%. Based on the phenotypic, chemotaxonomic, phylogenetic analyses, and genomic data, strain YZH12T represents a novel species of the genus Nocardioides, for which the name Nocardioides imazamoxiresistens YZH12T is proposed, with strain YZH12T (= KCTC 49964T = MCCC 1K0892T) as the type strain.

Anaerobic digestion of herbal waste: a waste to energy option.

Herbal waste produced during the manufacturing of herbal products is a potential feedstock for anaerobic digestion due to high amount of organic matter that can be transformed into biogas as an energy resource. Therefore, the present study was undertaken to convert herbal waste produced during the manufacturing of common of Ayurveda products into biogas through anaerobic digestion process using batch test study under controlled mesophilic temperature conditions of 35 °C with food to inoculum ratio of 0.75. The maximum biomethane potential (BMP) of 0.90 (gCH4COD/g CODfed) and sludge activity of 0.70 (gCH4-CD/gVSS) was exhibited by WS herbal waste owing to its high chemical oxygen demand (COD) of 4 g/g and better solubilization potential of the organic matter showing change in volatile suspended solids (ΔVSS) of 79%. On the other hand, the waste derived from the TA herb, exhibited the least biogas yield of 0.55 (gCH4COD/g CODfed) and sludge activity of 0.40 (gCH4-CD/gVSS), albeit with higher organic matter present. This was due to the possible hindrance of waste solubilization by the presence of lignin. The waste derived from VVL and PE showed intermediate BMP and sludge activity. The methane generation rate constant (k), a key indicator of the biodegradation potential, was also evaluated. The k values showed similar trend as of BMP values ranging from 0.081 to 0.15 d-1 thus indicating the influence of presence of lignin and the change in ΔVSS. The present study proves anaerobic digestion to be an alternative treatment method to be a milestone for management of herbal wastes and can be successfully implemented on real-scale systems.

Study on efficiency and mechanism of ultrasonic controlling membrane fouling in ceramic membrane bioreactors.

In recent years, ceramic membranes have been increasingly used in membrane bioreactors (MBRs). However, membrane fouling was still the core issue restricting the large-scale engineering application of ceramic MBRs. As a novel and alternative technology, ultrasonic could be used to control membrane fouling. This research focused on the efficiency and mechanism of ultrasonic controlling membrane fouling in ceramic MBRs. The results showed that ultrasonic reduced the sludge concentration in MBR, and the average particle size of sludge was always in a high range. The sludge activity of the system was stable at 6-9 (mg O2·(g MLSS·h)-1), indicating that ultrasonic did not destroy the activity of microorganisms in the system. The extracellular polymer substance (EPS) of the ultrasonic group was slightly higher than that of the control group, while the soluble microbial product (SMP) content was relatively stable. The ceramic membrane of the ultrasonic group has a partial retention effect on the organic components. The application of ultrasonic slowed down the decrease of the hydrophilicity of the ceramic membrane. The main pollutants on the membrane surface exist in the form of aromatic and heteroaromatic rings, alkynes, and so forth. Ultrasonic removes the amide substances from the membrane surface. Membrane fouling resistance is mainly due to membrane pore blockage, accounting for 75.53%. PRACTITIONER POINTS: Enrich the research on the mechanism of ultrasonic technology in membrane fouling control. The MBR can still operate normally with ultrasonic applied. The time for the ceramic membrane to reach the fouling end point is 2.4 times that without ultrasonic. The main cause of membrane fouling was pore blocking, accounting for 75.53%.

In situ electron generation through Fe/C supported sludge coupled with a counter-diffusion biofilm for electron-deficient wastewater treatment: Binding properties and catalytic competition mechanism of nitrate reductase.

A membrane-aerated biofilm-coupled Fe/C supported sludge system (MABR-Fe/C) was constructed to achieve in situ electron production for NO3--N reduction enhancement in different Fe/C loadings (10 g and 200 g). The anoxic environment formed in the MABR-Fe/C promoted a continual Fe2+release of Fe/C in 120 d operation (average Fe2+concentrations is 1.18 and 2.95 mg/L in MABR-Fe/C10 and MABR-Fe/C200, respectively). Metagenomics results suggested that the electrons generated from ongoing Fe2+ oxidation were transferred via the Quinone pool to EC 1.7.5.1 rather than EC 1.9.6.1 to complete the process of NO3--N reduction to NO2--N in Acidovorax, Ottowia, and Polaromonas. In the absence of organic matter, the NO3--N removal in MABR-Fe/C10 and MABR-Fe/C200 increased by 11.99 and 12.52 mg/L, respectively, compared to that in MABR. In the further NO2--N reduction, even if the minimum binding free energy (MBFE) was low, NO2--N in Acidovorax and Dechloromonas preferentially bind the Gln-residues for dissimilatory nitrate reduction (DNR) in the presence of Fe/C. Increasing Fe/C loading (MABR-Fe/C200) caused the formation of different residue binding sites, further enhancing the already dominant DNR. When DNR in MABR-Fe/C200 intensified, the TN in the effluent increased by 3.75 mg/L although the effluent NO3--N concentration was lower than that in MABR-Fe/C10. This study demonstrated a new MABR-Fe/C system for in situ electron generation to enhance biological nitrogen removal and analyzed the NO3--N reduction pathway and metabolic mechanism, thus providing new ideas for nitrogen removal in electron-deficient wastewater.

Methylosinus trichosporium OB3b bioaugmentation unleashes polyhydroxybutyrate-accumulating potential in waste-activated sludge.

BACKGROUND: Wastewater treatment plants contribute approximately 6% of anthropogenic methane emissions. Methanotrophs, capable of converting methane into polyhydroxybutyrate (PHB), offer a promising solution for utilizing methane as a carbon source, using activated sludge as a seed culture for PHB production. However, maintaining and enriching PHB-accumulating methanotrophic communities poses challenges. RESULTS: This study investigated the potential of Methylosinus trichosporium OB3b to bioaugment PHB-accumulating methanotrophic consortium within activated sludge to enhance PHB production. Waste-activated sludges with varying ratios of M. trichosporium OB3b (1:0, 1:1, 1:4, and 0:1) were cultivated. The results revealed substantial growth and methane consumption in waste-activated sludge with M. trichosporium OB3b-amended cultures, particularly in a 1:1 ratio. Enhanced PHB accumulation, reaching 37.1% in the same ratio culture, indicates the dominance of Type II methanotrophs. Quantification of methanotrophs by digital polymerase chain reaction showed gradual increases in Type II methanotrophs, correlating with increased PHB production. However, while initial bioaugmentation of M. trichosporium OB3b was observed, its presence decreased in subsequent cycles, indicating the dominance of other Type II methanotrophs. Microbial community analysis highlighted the successful enrichment of Type II methanotrophs-dominated cultures due to the addition of M. trichosporium OB3b, outcompeting Type I methanotrophs. Methylocystis and Methylophilus spp. were the most abundant in M. trichosporium OB3b-amended cultures. CONCLUSIONS: Bioaugmentation strategies, leveraging M. trichosporium OB3b could significantly enhance PHB production and foster the enrichment of PHB-accumulating methanotrophs in activated sludge. These findings contribute to integrating PHB production in wastewater treatment plants, providing a sustainable solution for resource recovery.

Application of Magnetic Materials Combined with Echo® Mass Spectrometry System in Analysis of Illegal Drugs in Sewage.

The aim of this study is to solve the problems of the complicated pretreatment and high analytical cost in the detection technology of trace drugs and their metabolites in municipal wastewater. A high-performance magnetic sorbent was fsynthesized for the enrichment of trace drugs and their metabolites in wastewater to develop a magnetic solid-phase extraction pretreatment combined with the acoustic ejection mass spectrometry (AEMS) analytical method. The magnetic nanospheres were successfully prepared by magnetic nanoparticles modified with divinylbenzene and vinylpyrrolidone. The results showed that the linear dynamic range of 17 drugs was 1-500 ng/mL, the recovery was 44-100%, the matrix effect was more than 51%, the quantification limit was 1-2 ng/mL, and the MS measurement was fast. It can be seen that the developed magnetic solid-phase extraction (MSPE) method is a good solution to the problems of the complicated pretreatment and analytical cost in the analysis of drugs in wastewater. The developed magnetic material and acoustic excitation pretreatment coupled with mass spectrometry analysis method can realize the low-cost, efficient enrichment, and fast analysis of different kinds of drug molecules in urban sewage.

Characterization and efficacy against carbapenem-resistant Acinetobacter baumannii of a novel Friunavirus phage from sewage.

Carbapenem-resistant Acinetobacter baumannii (CRAB) has become a new threat in recent years, owing to its rapidly increasing resistance to antibiotics and new effective therapies are needed to combat this pathogen. Phage therapy is considered to be the most promising alternative for treating CRAB infections. In this study, a novel phage, Ab_WF01, which can lyse clinical CRAB, was isolated and characterized from hospital sewage. The multiplicity of infection, morphology, one-step growth curve, stability, sensitivity, and lytic activity of the phage were also investigated. The genome of phage Ab_WF01 was 41, 317 bp in size with a GC content of 39.12% and encoded 51 open reading frames (ORFs). tRNA, virulence, and antibiotic resistance genes were not detected in the phage genome. Comparative genomic and phylogenetic analyses suggest that phage Ab_WF01 is a novel species of the genus Friunavirus, subfamily Beijerinckvirinae, and family Autographiviridae. The in vivo results showed that phage Ab_WF01 significantly increased the survival rate of CRAB-infected Galleria mellonella (from 0% to 70% at 48 h) and mice (from 0% to 60% for 7 days). Moreover, after day 3 post-infection, phage Ab_WF01 reduced inflammatory response, with strongly ameliorated histological damage and bacterial clearance in infected tissue organs (lungs, liver, and spleen) in mouse CRAB infection model. Taken together, these results show that phage Ab_WF01 holds great promise as a potential alternative agent with excellent stability for against CRAB infections.

Detection of thermotolerant coliforms and SARS-CoV-2 RNA in sewage and recreational waters in the Ecuadorian coast: A call for improving water quality regulation.

Wastewater surveillance represents an alternative approach to regulating contamination and the early detection of infectious agents and outbreaks of diseases of public health importance. This study evaluated domestic wastewater effects on recreational waters in estuarine and seawater bodies in Guayas and Santa Elena provinces in Ecuador, South America. Fecal indicator bacteria (thermotolerant coliforms) served as key indicators for evaluation. Physical, chemical, and microbiological quality markers following the Ecuadorian environmental quality standard and the discharge of effluents to the water resource were analyzed. Samples were collected from 44 coastal sites and 2 oxidation lagoons during the dry and rainy seasons of 2020 and 2021, respectively. SARS-CoV-2 RNA was detected in samples with higher E. coli concentrations using reverse transcription quantitative PCR to detect the genes N and ORF1ab. All samples analyzed for SARS-CoV-2 showed Ct ˂ 40 for at least one gene. Four samples showed at least 20 genome copies of gene N per reaction. These were at an artisanal fishing port, an estuarine area (Palmar), a recreational bay, and an oxidation lagoon. A moderate correlation was found between SARS-CoV-2 RNA, thermotolerant coliform and E. coli (p-value ≤ 0.0037), and a strong and positive correlation between thermotolerant coliform and E. coli. (p-value ≤ 0.00001), highlighting the utility of these established parameters as a proxy of the virus. Significant differences were found in the concentrations of thermotolerant coliforms between seasons (p-value = 0.016) and sites (p-value = 0.005). The highest levels of coliforms were found in the dry season (63000 MPN/100 mL) in Anconcito and during the rainy season (14000 MPN/100 mL) at Esterillo in Playas County. It is recommended that the decentralized autonomous governments of the surveyed provinces in Ecuador implement urgent corrective actions and establish medium-term mechanisms to minimize a potential contamination route. Additional parameters must be included in the monitoring, such as Enterococcus and intestinal parasites, due to their public health implications. In the oxidation lagoons, maintenance actions must be carried out, including the dissolution of sediments, an increase in water retention times, and in situ treatment of the sludge, to improve the system's performance.

Microbiome structure and function in parallel full-scale aerobic granular sludge and activated sludge processes.

Aerobic granular sludge (AGS) and conventional activated sludge (CAS) are two different biological wastewater treatment processes. AGS consists of self-immobilised microorganisms that are transformed into spherical biofilms, whereas CAS has floccular sludge of lower density. In this study, we investigated the treatment performance and microbiome dynamics of two full-scale AGS reactors and a parallel CAS system at a municipal WWTP in Sweden. Both systems produced low effluent concentrations, with some fluctuations in phosphate and nitrate mainly due to variations in organic substrate availability. The microbial diversity was slightly higher in the AGS, with different dynamics in the microbiome over time. Seasonal periodicity was observed in both sludge types, with a larger shift in the CAS microbiome compared to the AGS. Groups important for reactor function, such as ammonia-oxidising bacteria (AOB), nitrite-oxidising bacteria (NOB), polyphosphate-accumulating organisms (PAOs) and glycogen-accumulating organisms (GAOs), followed similar trends in both systems, with higher relative abundances of PAOs and GAOs in the AGS. However, microbial composition and dynamics differed between the two systems at the genus level. For instance, among PAOs, Tetrasphaera was more prevalent in the AGS, while Dechloromonas was more common in the CAS. Among NOB, Ca. Nitrotoga had a higher relative abundance in the AGS, while Nitrospira was the main nitrifier in the CAS. Furthermore, network analysis revealed the clustering of the various genera within the guilds to modules with different temporal patterns, suggesting functional redundancy in both AGS and CAS. KEY POINTS: • Microbial community succession in parallel full-scale aerobic granular sludge (AGS) and conventional activated sludge (CAS) processes. • Higher periodicity in microbial community structure in CAS compared to in AGS. • Similar functional groups between AGS and CAS but different composition and dynamics at genus level.

Performance evaluation of the effect of humic acid on Anammox granular sludge: Apparent morphology, nitrogen removal and microbial community.

Humic acid (HA) is a typical refractory organic matter, so it is of great significance to investigate its effect on the performance of Anammox granular sludge. When the dosage of HA ≤ 50 mg/L, HA promotes the total nitrogen removal rate (NRR) to 1.45 kg/(m3·day). When HA was between 50 and 100 mg/L, the NRR of Anammox was stable. At this time, the adsorption of HA causes the sludge to gradually turn from red to brown, but the activities of heme and enzymes showed that its capacity was not affected. When HA levels reached 250 mg/L, the NRR dropped to 0.11 kg/(m3·day). Moderate HA levels promoted the release of extracellular polymeric substance (EPS), but excessive HA levels lead to a decrease in EPS concentrations. HA inhibited Anammox activity, which indirectly hindered the transmission of substrate and accumulated substrate toxicity. Although HA promoted the increase of heterotrophic microbial abundance in Anammox system, the microbial diversity decreased gradually. With the increase of HA concentration, the abundance of Candidatus_Brocadia, the main functional microorganism of Anammox system, decreased gradually, while the abundance of Candidatus_Kuenenia increased gradually.

Resource utilization of drinking water treatment aluminum sludge in green cementing materials: Hydration characteristics and hydration kinetics.

As a byproduct of water treatment, drinking water treatment aluminum sludge (DWTAS) has challenges related to imperfect treatment and disposal, which has caused potential harm to human health and the environment. In this paper, heat treatment DWTAS as a supplement cementitious material was used to prepare a green cementing material. The results show that the 800°C is considered as the optimum heat treatment temperature for DWTAS. DWTAS-800°C is fully activated after thermal decomposition to form incompletely crystallized highly active γ-Al2O3 and active SiO2. The addition of DWTAS promoted the formation of ettringite and C-(A)-S-H gel, which could make up for the low early compressive strength of cementing materials to a certain extent. When cured for 90 days, the compressive strength of the mortar with 30% DWTAS-800°C reached 44.86 MPa. The dynamic process was well simulated by Krstulovic-Dabic hydration kinetics model. This study provided a methodology for the fabrication of environmentally friendly and cost-effective compound cementitious materials and proposed a "waste-to-resource" strategy for the sustainable management of typical solid wastes.

Insights into effects of thermotolerant nitrifying and sulfur-oxidizing inoculants on nitrogen-sulfur co-metabolism in sewage sludge composting.

In this study, high temperature thermotolerant nitrifying bacteria (TNB) and high temperature thermotolerant sulfide oxidizing bacteria (TSOB) were obtained from compost samples and inoculated into sewage sludge (SS) compost. The effects of inoculation on physical and chemical parameters, ammonia and hydrogen sulfide release, nitrogen form and sulfur compound content change and physical-chemical properties during nitrogen and sulfur conversion were studied. The results showed that inoculation of TNB and TSOB increased the temperature, pH, OM degradation, C/N ratio and germination index (GI) of compost. Compared with the control treatment (CK), the addition of inoculants reduced the release of NH3 and H2S, and transformed them into nitrogen and sulfur compounds, the hydrolysis of polymeric ferrous sulfate was promoted, resulting in relatively high content of sulfite and sulfate. At the same time, the physical and chemical properties of SS have a strong correlation with nitrogen and sulfur compounds.

Thermophilic-mesophilic temperature phase anaerobic co-digestion compared with single phase co-digestion of sewage sludge and food waste.

Anaerobic co-digestion is an effective method for addressing the issue of a single substrate not being able to achieve optimal conditions for anaerobic digestion. By adjusting the mixture ratio of sewage sludge and food waste to achieve the optimal carbon to nitrogen ratio, the effectiveness of thermophilic-mesophilic temperature phase anaerobic co-digestion (TPAcD) was evaluated in comparison to single phase mesophilic anaerobic co-digestion (MAcD) and thermophilic anaerobic co-digestion (TAcD). The results indicated that TPAcD increased methane yield by 50.3% and 32.7% compared to MAcD and TAcD, respectively. The variation in VFA, pH, and ammonia nitrogen levels demonstrated that TPAcD combines the advantages of both MAcD and TAcD, with a higher hydrolysis rate in the early stage under thermophilic conditions (55 °C) and a suitable environment in the later stage under mesophilic conditions (35 °C). The kinetic parameters of anaerobic co-digestions also demonstrated that TPAcD performs better. Therefore, further research on TPAcD of sewage sludge and food waste is warranted due to its significant improvements in methane production rate, total methane yield, and system stability. Additionally, TPAcD contributes to reducing carbon emissions and supports the realization of "carbon neutrality".

Refractory dissolved organic matters in sludge leachate trigger the combination of anammox and denitratation for advanced nitrogen removal.

The cost-effective treatment of sludge leachate (SL) with high nitrogen content and refractory dissolved organic matter (rDOM) has drawn increasing attention. This study employed, for the first time, a rDOM triggered denitratation-anammox continuous-flow process to treat landfill SL. Moreover, the mechanisms of exploiting rDOM from SL as an inner carbon source for denitratation were systematically analyzed. The results demonstrated outstanding nitrogen and rDOM removal performance without any external carbon source supplement. In this study, effluent concentrations of 4.27 ± 0.45 mgTIN/L and 5.58 ± 1.64 mgTN/L were achieved, coupled with an impressive COD removal rate of 65.17 % ± 1.71 %. The abundance of bacteria belonging to the Anaerolineaceae genus, which were identified as rDOM degradation bacteria, increased from 18.23 % to 35.62 %. As a result, various types of rDOM were utilized to different extents, with proteins being the most notable, except for lignins. Metagenomic analysis revealed a preference for directing electrons towards NO3--N reductase rather than NO2--N reductase, indicating the coupling of denitratation bacteria and anammox bacteria (Candidatus Brocadia). Overall, this study introduced a novel synergy platform for advanced nitrogen removal in treating SL using its inner carbon source. This approach is characterized by low energy consumption and operational costs, coupled with commendable efficiency.

Blue-green infrastructure in view of Integrated Urban Water Management: A novel assessment of an effectiveness index.

Addressing urban water management challenges requires a holistic view. Sustainable approaches such as blue-green infrastructure (BGI) provide several benefits, but assessing their effectiveness demands a systemic approach. Challenges are magnified in informal areas, leading to the combination of integrated urban water management (IUWM) with BGI as a proposed solution by this research. We employed the Urban Water Use (UWU) model to assess the effectiveness index (EI) of BGI measures in view of IUWM after stakeholder consultation. The procedure in this novel assessment includes expert meetings for scenario building and resident interviews to capture the community's vision. To assess the impact of IUWM on the effectiveness of BGI measures, we proposed a simulation with BGI only and then three simulations with improvements to the water and sewage systems. The results of the EI analysis reveal a substantial improvement in the effectiveness of BGI measures through IUWM combination. Moreover, we offer insights into developing strategies for UWU model application in informal settlements, transferrable to diverse urban areas. The findings hold relevance for policymakers and urban planners, aiding informed decisions in urban water management.

Utilizing anaerobic substrate distribution for growth of aerobic granular sludge in continuous-flow reactors.

The development of continuous flow reactors (CFRs) employing aerobic granular sludge (AGS) for the retrofit of existing wastewater treatment plants (WWTPs) using a continuous-flow activated sludge (CFAS) system has garnered increasing interest. This follows the worldwide adoption of AGS technology in sequencing batch reactors (SBRs). The better settleability of AGS compared to AS allows for process intensification of existing wastewater treatment plants without the difficult conversion of often relatively shallow CFRs to deeper AGS-SBRs. To retrofit existing CFAS systems with AGS, achieving both increased hydraulic capacity and enhanced biological nutrient removal necessitates the formation of granular sludge based on the same selective pressures applied in AGS-SBRs. Previous efforts have focussed mainly on the selective wasting of flocculent sludge and retaining granular sludge to drive aerobic granulation. In this study a pilot-scale CFR was developed to best mimic the implementation of the granulation mechanisms of full-scale AGS-SBRs. The pilot-scale reactor was fed with pre-settled municipal wastewater. We established metrics to assess the degree to which the proposed mechanisms were implemented in the pilot-scale CFR and compared them to data from full-scale AGS-SBRs, specifically with respect to the anaerobic distribution of granule forming substrates (GFS). The selective pressures for granular sludge formation were implemented through inclusion of anaerobic upflow selectors with a water depth of 2.5 meters, which yielded a sludge with properties similar to AGS from full-scale SBRs. In comparison to the CFAS system at Harnaschpolder WWTP treating the same pre-settled wastewater, a more than twofold increase in volumetric removal capacity for both phosphorus and nitrogen was achieved. The use of a completely mixed anaerobic selector, as opposed to an anaerobic upflow selector, caused a shift in EBPR activity from the largest towards the smallest size class, while nitrification was majorly unaffected. Anaerobic selective feeding via bottom-feeding is, therefore, favorable for the long-term stability of AGS, especially for less acidified wastewater. The research underlines the potential of AGS for enhancing the hydraulic and biological treatment capacity of existing CFAS systems.