ABSTRACT
Steviol glycosides (SGs) are a natural sweetener widely used in the food and beverage industry, but the low solubility and stability of SG aqueous solutions greatly limit their application performance, especially in liquid formulations. In this work, we explore the solubility behavior of rebaudioside A (Reb A) in water, a major component of SGs, with the aim of clarifying the underlying mechanisms of the solubility and stability constraints of SGs, as well as the impact on their multifunctional properties. We demonstrate for the first time that Reb A exhibits hierarchical self-assembly in solutions, forming spherical micelles first when the concentration exceeds its critical micelle concentration (5.071 mg/mL), which then further assemble into large rod-like aggregates. The formation of such large Reb A aggregates is mainly dominated by hydrogen bonding and short-range Coulomb interaction energy, thus leading to the low solubility and precipitation of Reb A solutions. Surprisingly, aggregated Reb A structures display significantly improved organoleptic properties, revealing that self-aggregation can be developed as a simple, efficient, and green strategy for improving the taste profile of SGs. Additionally, the self-aggregation of Reb A at high concentrations impairs active encapsulation and also affects its interfacial and emulsifying properties.
Subject(s)
Diterpenes, Kaurane , Glycosides , Solubility , Sweetening Agents , Diterpenes, Kaurane/chemistry , Sweetening Agents/chemistry , Glycosides/chemistry , Water/chemistry , Micelles , Hydrogen Bonding , Taste , Glucosides/chemistry , Stevia/chemistry , Solutions/chemistryABSTRACT
In recent years, solution processes have gained considerable traction as a cost-effective and scalable method to produce high-performance thermoelectric materials. The process entails a series of critical steps: synthesis, purification, thermal treatments, and consolidation, each playing a pivotal role in determining performance, stability, and reproducibility. We have noticed a need for more comprehensive details for each of the described steps in most published works. Recognizing the significance of detailed synthetic protocols, we describe here the approach used to synthesize and characterize one of the highest-performing polycrystalline p-type SnSe. In particular, we report the synthesis of SnSe particles in water and the subsequent surface treatment with CdSe molecular complexes that yields CdSe-SnSe nanocomposites upon consolidation. Moreover, the surface treatment inhibits grain growth through Zenner pinning of secondary phase CdSe nanoparticles and enhances defect formation at different length scales. The enhanced complexity in the CdSe-SnSe nanocomposite microstructure with respect to SnSe promotes phonon scattering and thereby significantly reduces the thermal conductivity. Such surface engineering provides opportunities in solution processing for introducing and controlling defects, making it possible to optimize the transport properties and attain a high thermoelectric figure of merit.
Subject(s)
Cadmium Compounds , Selenium Compounds , Thermal Conductivity , Selenium Compounds/chemistry , Cadmium Compounds/chemistry , Tin/chemistry , Solutions/chemistry , Surface Properties , Crystallization/methodsABSTRACT
Freezing is essential for the stability of biological drug substances and products, particularly in frozen solution formulations and during the primary drying of lyophilized preparations. However, the unfrozen segment within the frozen matrix can alter solute concentration, ionic strength, and stabilizer crystallization, posing risks of increased biophysical instability and faster chemical degradation. While quantifying the unfrozen water content is important for designing stable biopharmaceuticals, there is a lack of analytical techniques for in situ quantitative measurements. In this study, we introduce a 1H magic angle spinning NMR technique to identify the freezing point (Tice) and quantify mobile water content in frozen biologics, applying this method to analyze the freezing of a commercial high-concentration drug product, Dupixent®. Our results demonstrate that water freezing is influenced by buffer salt properties and formulation composition, including the presence of sugar cryoprotectants and protein concentration. Additionally, the 1H chemical shift can probe pH in the unfrozen phase, potentially predicting the microenvironmental acidity in the frozen state. Our proposed methodology provides fresh insights into the analysis of freeze-concentrated solutions, enhancing our understanding of the stability of frozen and lyophilized biopharmaceuticals.
Subject(s)
Freeze Drying , Freezing , Water , Water/chemistry , Freeze Drying/methods , Magnetic Resonance Spectroscopy/methods , Drug Stability , Cryoprotective Agents/chemistry , Hydrogen-Ion Concentration , Pharmaceutical Preparations/chemistry , Pharmaceutical Preparations/analysis , Solutions/chemistry , Chemistry, Pharmaceutical/methods , Osmolar ConcentrationABSTRACT
Crystallization is a widely used purification technique in the manufacture of active pharmaceutical ingredients (APIs) and precursor molecules. However, when impurities and desired compounds have similar molecular structures, separation by crystallization may become challenging. In such cases, some impurities may form crystalline solid solutions with the desired product during recrystallization. Understanding the molecular structure of these recrystallized solid solutions is crucial to devise methods for effective purification. Unfortunately, there are limited analytical techniques that provide insights into the molecular structure or spatial distribution of impurities that are incorporated within recrystallized products. In this study, we investigated model solid solutions formed by recrystallizing salicylic acid (SA) in the presence of anthranilic acid (AA). These two molecules are known to form crystalline solid solutions due to their similar molecular structures. To overcome challenges associated with the long 1H longitudinal relaxation times (T1(1H)) of SA and AA, we employed dynamic nuclear polarization (DNP) and 15N isotope enrichment to enable solid-state NMR experiments. Results of solid-state NMR experiments and DFT calculations revealed that SA and AA are homogeneously alloyed as a solid solution. Heteronuclear correlation (HETCOR) experiments and plane-wave DFT structural models provide further evidence of the molecular-level interactions between SA and AA. This research provides valuable insights into the molecular structure of recrystallized solid solutions, contributing to the development of effective purification strategies and an understanding of the physicochemical properties of solid solutions.
Subject(s)
Carbon Isotopes , Crystallization , Magnetic Resonance Spectroscopy , Nitrogen Isotopes , Salicylic Acid , ortho-Aminobenzoates , Magnetic Resonance Spectroscopy/methods , Salicylic Acid/chemistry , Crystallization/methods , Nitrogen Isotopes/chemistry , ortho-Aminobenzoates/chemistry , Carbon Isotopes/chemistry , Solutions/chemistry , Molecular StructureABSTRACT
Charges and their contribution to protein-protein interactions are essential for the key structural and dynamic properties of monoclonal antibody (mAb) solutions. In fact, they influence the apparent molecular weight, the static structure factor, the collective diffusion coefficient, or the relative viscosity, and their concentration dependence. Further, charges play an important role in the colloidal stability of mAbs. There exist standard experimental tools to characterize mAb net charges, such as the measurement of the electrophoretic mobility, the second virial coefficient, or the diffusion interaction parameter. However, the resulting values are difficult to directly relate to the actual overall net charge of the antibody and to theoretical predictions based on its known molecular structure. Here, we report the results of a systematic investigation of the solution properties of a charged IgG1 mAb as a function of concentration and ionic strength using a combination of electrophoretic measurements, static and dynamic light scattering, small-angle X-ray scattering, and tracer particle-based microrheology. We analyze and interpret the experimental results using established colloid theory and coarse-grained computer simulations. We discuss the potential and limits of colloidal models for the description of the interaction effects of charged mAbs, in particular pointing out the importance of incorporating shape and charge anisotropy when attempting to predict structural and dynamic solution properties at high concentrations.
Subject(s)
Antibodies, Monoclonal , Colloids , Immunoglobulin G , Colloids/chemistry , Antibodies, Monoclonal/chemistry , Immunoglobulin G/chemistry , Viscosity , Solutions/chemistry , Osmolar Concentration , Scattering, Small Angle , Dynamic Light Scattering , Computer Simulation , X-Ray Diffraction/methodsABSTRACT
The cellular environment is crowded with macromolecules of different shapes and sizes. The effect of this macromolecular crowding has been studied in a variety of synthetic crowding environments: two popular examples are the compact colloid-like Ficoll macromolecule and the globular protein bovine serum albumin (BSA). Recent studies have indicated that a significant component of bound or surface-associated water in these crowders reduces the available free volume. In this work, Brillouin light scattering experiments were performed on aqueous solutions of Ficoll 70 and Ficoll 400 with concentrations ranging from 1 to 35 wt % and BSA with concentrations of 1 to 27 wt %. From the dependence of spectral peak parameters on polymer concentration, we determined fundamental solution properties: hypersound velocity, adiabatic bulk modulus and compressibility, apparent viscosity, and hypersound attenuation. The existing theory that ignores intermolecular interactions can capture only the observed linear trends in the frequency shift up to a threshold concentration, beyond which a quadratic term accounting for intermolecular interactions is necessary. This likely indicates a transition from the dilute to semidilute regime. In the Ficoll solutions (but not BSA), we see evidence for a central mode, which is indicative of relaxation in the hydration shell of Ficoll.
Subject(s)
Serum Albumin, Bovine , Water , Ficoll/chemistry , Serum Albumin, Bovine/chemistry , Macromolecular Substances , Spectrum Analysis , Solutions/chemistryABSTRACT
Therapeutic proteins with a high concentration and low viscosity are highly desirable for subcutaneous and certain local injections. The shape of a protein is known to influence solution viscosity; however, the precise quantification of protein shape and its relative impact compared to other factors like charge-charge interactions remains unclear. In this study, we utilized seven model proteins of varying shapes and experimentally determined their shape factors (v) based on Einstein's viscosity theory, which correlate strongly with the ratios of the proteins' surface area to the 2/3 power of their respective volumes, based on protein crystal structures resolved experimentally or predicted by AlphaFold. This finding confirms the feasibility of computationally estimating protein shape factors from amino acid sequences alone. Furthermore, our results demonstrated that, in high-concentration electrolyte solutions, a more spherical protein shape increases the protein's critical concentration (C*), the transition concentration beyond which protein viscosity increases exponentially relative to concentration increases. In summary, our work elucidates protein shape as a key determinant of solution viscosity through quantitative analysis and comparison with other contributing factors. This provides insights into molecular engineering strategies to optimize the molecular design of therapeutic proteins, thus optimizing their viscosity.
Subject(s)
Antibodies, Monoclonal , Electrolytes , Antibodies, Monoclonal/chemistry , Viscosity , Solutions/chemistryABSTRACT
BACKGROUND: One of the important formalisms of non-equilibrium thermodynamics is Peusner network thermodynamics. The description of the energy conversion in membrane processes, i.e., the conversion of the internal energy of the system into the dissipated energy and the free energy used for the work associated with the transport of solution components, allows us to describe the relationship between these energies and the thermodynamic forces acting in the membrane system. OBJECTIVES: The aim of this study was to develop a procedure to transform the Kedem-Katchalsky equations for the transport of binary electrolytic solutions across a membrane into the Kedem-Katchalsky-Peusner equations based on Peusner network thermodynamics. The conversion of electrochemical energy to free energy in the membrane system was also determined. MATERIAL AND METHODS: The nanobiocellulose biomembranes (Biofill) were the subject of the study with experimentally determined transport parameters for aqueous NaCl solutions. The research method is the Kedem-Katchalsky-Peusner formalism for binary electrolyte solutions with introduced Peusner coefficients. RESULTS: The coefficients of the L version of the membrane transport equations and the Peusner coupling coefficients were derived as functions of NaCl concentration in the membrane. Based on these coefficients, the fluxes of internal energy of the system, energy dissipated to the surroundings and free energy related to the transport of electrolyte across the membrane were calculated and presented as functions of the osmotic and electric forces on the membrane. CONCLUSIONS: The Peusner coefficients obtained from the transformations of the coefficients of the Kedem-Katchalsky formalism for the transport of electrolyte solutions through the Biofill membrane were used to calculate the coupling coefficients of the membrane processes and the dissipative energy flux. The dissipative energy flux takes the form of a quadratic form due to the thermodynamic forces on the membrane - second degree curves are obtained. Moreover, the dissipative energy flux as a function of thermodynamic forces allowed us to examine the energy conversion in transport processes in the membrane system.
Subject(s)
Electrolytes , Membranes, Artificial , Thermodynamics , Electrolytes/chemistry , Solutions/chemistry , Models, Chemical , Sodium Chloride/chemistryABSTRACT
The hydrophobicity of solutes measures the intensity of a solute's interaction with aqueous environment. The aqueous environment may change with its composition, leading to changes in its solvent properties largely characterized by polarity. As a result, the relative hydrophobicity of a solute is a function of the solute structure and the properties of the water-based solvent determined by the total composition of the aqueous phase. This aspect is commonly ignored by medicinal chemists even though it is essential for drug distribution between different biological tissues. Partitioning of solutes in aqueous two-phase systems provides the relative hydrophobicity estimates for any water-soluble compounds that can be used to improve predictions of the toxicity and other biological effects of these compounds.
Subject(s)
Water , Solvents/chemistry , Solutions/chemistry , Water/chemistry , Hydrophobic and Hydrophilic InteractionsABSTRACT
Macromolecular crowding is the usual condition of cells. The implications of the crowded cellular environment for protein stability and folding, protein-protein interactions, and intracellular transport drive a growing interest in quantifying the effects of crowding. While the properties of crowded solutions have been extensively studied, less attention has been paid to the interaction of crowders with the cellular boundaries, i.e., membranes. However, membranes are key components of cells and most subcellular organelles, playing a central role in regulating protein channel and receptor functions by recruiting and binding charged and neutral solutes. While membrane interactions with charged solutes are dominated by electrostatic forces, here we show that significant charge-induced forces also exist between membranes and neutral solutes. Using neutron reflectometry measurements and molecular dynamics simulations of poly(ethylene glycol) (PEG) polymers of different molecular weights near charged and neutral membranes, we demonstrate the roles of surface dielectrophoresis and counterion pressure in repelling PEG from charged membrane surfaces. The resulting depletion zone is expected to have consequences for drug design and delivery, the activity of proteins near membrane surfaces, and the transport of small molecules along the membrane surface.
Subject(s)
Polymers , Proteins , Cell Membrane , Polymers/chemistry , Proteins/chemistry , Polyethylene Glycols/chemistry , Solutions/chemistryABSTRACT
Hydrophobic bonding is a phenomenon wherein the adsorption of solutes from aqueous solutions is driven largely by the desire of solvent molecules to interact with each other, thus squeezing out solute molecules onto the adsorbent surface. A novel computational analysis of hydration shell water dynamics was used to study the driving force for the hydrophobic bonding of five small drug molecules to activated carbon. It was demonstrated that the solvation of these drug molecules produced hydration shells of lower density and molecular mobility than bulk water, up to 10.5-14 Å distance. Excellent correlations were found between the simulated water-water hydrogen bonding lifetimes in the hydration shell and the experimental capacity constants of hydrophobic bonding (KHB) obtained from the Two-Mechanism Langmuir-Like Equation. KHB also correlated well with the solute-solvent vdW interaction energies in a manner that could allow future predictions of KHB values from simple simulations. Such correlations were not found with the capacity constant of the well-known enthalpy-driven adsorption. The driving force for hydrophobic bonding has entropic origins due to the elimination of water structuring in the hydration shells. However, unlike a typical entropy-driven process, hydrophobic bonding to activated carbon was also associated with a large exothermic enthalpy change when studied with isoperibol calorimetry.
Subject(s)
Charcoal , Molecular Dynamics Simulation , Entropy , Adsorption , Solvents/chemistry , Water/chemistry , Solutions/chemistry , Hydrophobic and Hydrophilic Interactions , Hydrogen BondingABSTRACT
It is well established that deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) exhibit a reentrant condensation (RC) phase behavior in the presence of the trivalent hexamine cobalt(III) cations (Hac) which can be important for their packing and folding. A similar behavior can be observed for negatively charged globular proteins in the presence of trivalent metal cations, such as Y3+ or La3+. This phase behavior is mainly driven by charge inversion upon an increasing salt concentration for a fixed protein concentration (cp). However, as Hac exhibits structural differences compared to other multivalent metal cations, with six ammonia ligands (NH3) covalently bonded to the central cobalt atom, it is not clear that Hac can induce a similar phase behavior for proteins. In this work, we systematically investigate whether negatively charged globular proteins ß-lactoglobulin (BLG), bovine serum albumin (BSA), human serum albumin (HSA) and ovalbumin (OVA) feature Hac-induced RC. Effective protein-protein interactions were investigated by small-angle X-ray scattering. The reduced second virial coefficient (B2/B2HS) was obtained as a function of salt concentration. The virial coefficient analysis performed confirms the reentrant interaction (RI) behavior for BLG without actually inducing RC, given the insufficient strengths of the interactions for the latter to occur. In contrast, the strength of attraction for BSA, HSA and OVA are too weak to show RC. Model free analysis of the inverse intensity [Formula: see text] also supports this finding. Looking at different q-range by employing static (SLS) and dynamic light scattering experiments, the presence of RI behavior can be confirmed. The results are further discussed in view of metal cation binding sites in nucleic acids (DNA and RNA), where Hac induced RC phase behavior.
Subject(s)
Chlorides , Cobalt , Humans , Chlorides/chemistry , Methenamine , Serum Albumin, Bovine/chemistry , Cations/chemistry , DNA , RNA , Solutions/chemistryABSTRACT
During the developability assessment of therapeutic monoclonal antibody (mAb) candidates, utilization of robust high-throughput predictive assays enables rapid selection of top candidates with low risks for late-stage development. Predicting the viscosities of highly concentrated mAbs using limited materials is an important aspect of developability assessment because high viscosity can complicate manufacturability, stability, and administration. Here, we report a high-throughput assay measuring protein-protein interactions to predict mAb viscosity. The diffusion interaction parameter (kD) measures colloidal self-association in dilute solutions and has been reported to be predictive of the mAb viscosity at high concentrations. However, kD of Amgen early stage IgG1 mAb candidates measured in 10 mM acetate at pH 5.2 containing sucrose and polysorbate (denoted A52SuT) shows only weak correlation to their viscosities at 140 mg/mL in A52SuT. We hypothesize that kD measured in A52SuT reflects primarily long-range electrostatic repulsions because most of these mAb candidates carry strong net positive charges in this low ionic strength formulation with pH (5.2) well below pI values of mAb candidates. However, the viscosities of high concentration mAbs depend heavily on short-range molecular interactions. We propose an improved kD method in which salt is added to suppress charge repulsions and to allow for detection of key short-range interactions in dilute solutions. Salt types and salt concentrations were screened, and an optimal salt condition was identified. This optimized method was further validated using two test mAb sets. Overall, the method improves the Pearson R2 between kD and viscosity (6-230 cP) from 0.24 to 0.80 for a data set consisting of 37 mAbs.
Subject(s)
Antibodies, Monoclonal , Sodium Chloride , Antibodies, Monoclonal/chemistry , Viscosity , Diffusion , Solutions/chemistryABSTRACT
In recent years, advancements in bioengineering and materials science have witnessed increasing interest in synthetic polymers capable of fulfilling various applications. Owing to their distinctive properties, Pluronics can be used as nano-drug carriers, to deliver poorly water-soluble drugs, and as model systems to study colloidal science by tuning amphiphilic properties. In this work, we investigated the effect of diclofenac sodium on the self-assembly and thermoresponsive crystallization of Pluronic F68 in water solutions, by employing experimental rheology and Nuclear Magnetic Resonance (NMR). We built a complete phase diagram as a function of temperature and concentration for 45 wt% Pluronic F68 with various amounts of diclofenac sodium in water. The morphological transitions were followed as a function of temperature via linear rheology. We extrapolated the transition temperatures - identifying distinct phases - as a function of the drug concentration and proposed an empirical model for their prediction. NMR analysis provided further information on the structural characteristics of the systems, shedding light on the interactions between F68 and diclofenac sodium. Although dealing with a pharmaceutical salt, the study is focused on a colloidal system and its interaction with a binding molecule, that is of general interest for colloidal science.
Subject(s)
Phase Transition , Diclofenac/chemistry , Solutions/chemistry , Poloxamer/chemistry , Rheology , Temperature , Magnetic Resonance Spectroscopy , DiffusionABSTRACT
Iron is important in regulating the ocean carbon cycle1. Although several dissolved and particulate species participate in oceanic iron cycling, current understanding emphasizes the importance of complexation by organic ligands in stabilizing oceanic dissolved iron concentrations2-6. However, it is difficult to reconcile this view of ligands as a primary control on dissolved iron cycling with the observed size partitioning of dissolved iron species, inefficient dissolved iron regeneration at depth or the potential importance of authigenic iron phases in particulate iron observational datasets7-12. Here we present a new dissolved iron, ligand and particulate iron seasonal dataset from the Bermuda Atlantic Time-series Study (BATS) region. We find that upper-ocean dissolved iron dynamics were decoupled from those of ligands, which necessitates a process by which dissolved iron escapes ligand stabilization to generate a reservoir of authigenic iron particles that settle to depth. When this 'colloidal shunt' mechanism was implemented in a global-scale biogeochemical model, it reproduced both seasonal iron-cycle dynamics observations and independent global datasets when previous models failed13-15. Overall, we argue that the turnover of authigenic particulate iron phases must be considered alongside biological activity and ligands in controlling ocean-dissolved iron distributions and the coupling between dissolved and particulate iron pools.
Subject(s)
Iron , Minerals , Seawater , Iron/analysis , Iron/chemistry , Iron/metabolism , Ligands , Minerals/analysis , Minerals/chemistry , Minerals/metabolism , Carbon Cycle , Datasets as Topic , Atlantic Ocean , Seawater/analysis , Seawater/chemistry , Bermuda , Time Factors , Seasons , Solutions/chemistry , InternationalityABSTRACT
Studying protein interactions at low temperatures has important implications for optimizing cryostorage processes of biological tissue, food, and protein-based drugs. One of the major issues is related to the formation of ice nanocrystals, which can occur even in the presence of cryoprotectants and can lead to protein denaturation. The presence of ice nanocrystals in protein solutions poses several challenges since, contrary to microscopic ice crystals, they can be difficult to resolve and can complicate the interpretation of experimental data. Here, using a combination of small- and wide-angle X-ray scattering (SAXS and WAXS), we investigate the structural evolution of concentrated lysozyme solutions in a cryoprotected glycerol-water mixture from room temperature (T = 300 K) down to cryogenic temperatures (T = 195 K). Upon cooling, we observe a transition near the melting temperature of the solution (T ≈ 245 K), which manifests both in the temperature dependence of the scattering intensity peak position reflecting protein-protein length scales (SAXS) and the interatomic distances within the solvent (WAXS). Upon thermal cycling, a hysteresis is observed in the scattering intensity, which is attributed to the formation of nanocrystallites in the order of 10 nm. The experimental data are well described by the two-Yukawa model, which indicates temperature-dependent changes in the short-range attraction of the protein-protein interaction potential. Our results demonstrate that the nanocrystal growth yields effectively stronger protein-protein attraction and influences the protein pair distribution function beyond the first coordination shell.
Subject(s)
Ice , Scattering, Small Angle , X-Ray Diffraction , Freezing , Solvents , Solutions/chemistryABSTRACT
Proton transfer is one of the most fundamental events in aqueous-phase chemistry and an emblematic case of coupled ultrafast electronic and structural dynamics1,2. Disentangling electronic and nuclear dynamics on the femtosecond timescales remains a formidable challenge, especially in the liquid phase, the natural environment of biochemical processes. Here we exploit the unique features of table-top water-window X-ray absorption spectroscopy3-6 to reveal femtosecond proton-transfer dynamics in ionized urea dimers in aqueous solution. Harnessing the element specificity and the site selectivity of X-ray absorption spectroscopy with the aid of ab initio quantum-mechanical and molecular-mechanics calculations, we show how, in addition to the proton transfer, the subsequent rearrangement of the urea dimer and the associated change of the electronic structure can be identified with site selectivity. These results establish the considerable potential of flat-jet, table-top X-ray absorption spectroscopy7,8 in elucidating solution-phase ultrafast dynamics in biomolecular systems.
Subject(s)
Protons , Urea , Urea/chemistry , Solutions/chemistry , Water/chemistry , X-Ray Absorption Spectroscopy , Quantum Theory , Time FactorsABSTRACT
Natural astaxanthin has been widely used in the food, cosmetic, and medicine industries due to its exceptional biological activity. Shrimp shell is one of the primary natural biological sources of astaxanthin. However, after astaxanthin recovery, there is still a lot of chitin contained in the residues. In this study, the residue from shrimp (Penaeus vannamei) shells after astaxanthin extraction using ionic liquid (IL) 1-ethyl-3-methyl-imidazolium acetate ([Emim]Ac) was used as a bioadsorbent to remove fluoride from the aqueous solution. The results show the IL extraction conditions, including the solid/liquid ratio, temperature, time, and particle size, all played important roles in the removal of fluoride by the shrimp shell residue. The shrimp shells treated using [Emim]Ac at 100 °C for 2 h exhibited an obvious porous structure, and the porosity showed a positive linear correlation with defluorination (DF, %). Moreover, the adsorption process of fluoride was nonspontaneous and endothermic, which fits well with both the pseudo-second-order and Langmuir models. The maximum adsorption capacity calculated according to the Langmuir model is 3.29 mg/g, which is better than most bioadsorbents. This study provides a low-cost and efficient method for the preparation of adsorbents from shrimp processing waste to remove fluoride from wastewater.
Subject(s)
Adsorption , Animal Shells , Fluorides , Penaeidae , Water Pollutants, Chemical , Water , Xanthophylls , Animals , Animal Shells/chemistry , Chitin/analysis , Chitin/chemistry , Fluorides/chemistry , Fluorides/isolation & purification , Hydrogen-Ion Concentration , Ionic Liquids/chemistry , Kinetics , Particle Size , Penaeidae/chemistry , Porosity , Seafood , Solutions/chemistry , Temperature , Wastewater/chemistry , Water/chemistry , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/isolation & purification , Xanthophylls/isolation & purificationABSTRACT
This report is the first of 2-part study of the effect of gradients in column parameters on the column performance. If t, x and p are, respectively, time since sample introduction, distance from column inlet and some parameter of solute migration along the column then ∂p/∂t and ∂p/∂x are, respectively, the rate of changing p and the gradient of p. Unified approach to study of gradients and rates in different chromatographic techniques (LC, GC, etc.) has been developed. To facilitate a unified approach, the umbrella term mobilization (y) representing column temperature (T) in GC, solvent composition (Ï) in LC, etc. is introduced. Differential equations for migration of a solute band (collection of solute molecules) under the following conditions are formulated and solved:The key solutions describe the time of migration of a solute band and the band width - both as functions of the distance traveled by the band. The solutions are used in Part 2 for the study of the effects of the negative gradients in y on column performance in several practically important cases. A reduction of the key general solutions to much simpler equations for gradient LC has been demonstrated herein as an example.
Subject(s)
Chromatography , Solvents/chemistry , Solutions/chemistry , TemperatureABSTRACT
The demand to effectively treat medical wastewater has escalated with the much greater use of antiviral drugs since the COVID-19 pandemic. Forward osmosis (FO) has great potential in wastewater treatment only when appropriate draw solutes are available. Here, we synthesize a series of smart organic-inorganic polyoxomolybdates (POMs), namely, (NH4)6[Mo7O24], (PrNH3)6[Mo7O24], (iPrNH3)6[Mo7O24], and (BuNH3)6[Mo7O24], for FO to treat antiviral-drug wastewater. Influential factors of separation performance have been systematically studied by tailoring the structure, organic characteristics, and cation chain length of POMs. POMs at 0.4 M produce water fluxes ranging from 14.0 to 16.4 LMH with negligible solute losses, at least 116% higher than those of NaCl, NH4HCO3, and other draw solutes. (NH4)6[Mo7O24] creates a water flux of 11.2 LMH, increased by more than 200% compared to that of NaCl and NH4HCO3 in long-term antiviral-drug wastewater reclamation. Remarkably, the drugs treated with NH4HCO3 and NaCl are either contaminated or denatured, while those with (NH4)6[Mo7O24] remain intact. Moreover, these POMs are recovered by sunlight-assisted acidification owing to their light and pH dual sensitivity and reusability for FO. POMs prove their suitability as draw solutes and demonstrate their superiority over the commonly studied draw solutes in wastewater treatment.