ABSTRACT
Computational models of musculoskeletal systems are essential tools for understanding how muscles, tendons, bones, and actuation signals generate motion. In particular, the OpenSim family of models has facilitated a wide range of studies on diverse human motions, clinical studies of gait, and even non-human locomotion. However, biological structures with many joints, such as fingers, necks, tails, and spines, have been a longstanding challenge to the OpenSim modeling community, especially because these structures comprise numerous bones and are frequently actuated by extrinsic muscles that span multiple joints-often more than three-and act through a complex network of branching tendons. Existing model building software, typically optimized for limb structures, makes it difficult to build OpenSim models that accurately reflect these intricacies. Here, we introduce ArborSim, customized software that efficiently creates musculoskeletal models of highly jointed structures and can build branched muscle-tendon architectures. We used ArborSim to construct toy models of articulated structures to determine which morphological features make a structure most sensitive to branching. By comparing the joint kinematics of models constructed with branched and parallel muscle-tendon units, we found that among various parameters-the number of tendon branches, the number of joints between branches, and the ratio of muscle fiber length to muscle tendon unit length-the number of tendon branches and the number of joints between branches are most sensitive to branching modeling method. Notably, the differences between these models showed no predictable pattern with increased complexity. As the proportion of muscle increased, the kinematic differences between branched and parallel models units also increased. Our findings suggest that stress and strain interactions between distal tendon branches and proximal tendon and muscle greatly affect the overall kinematics of a musculoskeletal system. By incorporating complex muscle-tendon branching into OpenSim models using ArborSim, we can gain deeper insight into the interactions between the axial and appendicular skeleton, model the evolution and function of diverse animal tails, and understand the mechanics of more complex motions and tasks.
Subject(s)
Joints , Muscle, Skeletal , Software , Tendons , Tendons/physiology , Tendons/anatomy & histology , Humans , Biomechanical Phenomena , Joints/physiology , Joints/anatomy & histology , Muscle, Skeletal/physiology , Muscle, Skeletal/anatomy & histology , Models, Biological , Computational Biology , Computer Simulation , AnimalsABSTRACT
This study aimed to evaluate the presence of adipose tissue surrounding the flexor hallucis longus (FHL) tendon through gross dissection and magnetic resonance imaging (MRI). Grossly, we observed the FHL tendon and surrounding tissues in nine cadavers. Using MRI, we quantitatively evaluated each tissue from the horizontal plane in 40 healthy ankles. Macroscopic autopsy revealed the presence of adipose tissue behind the ankle joint between the FHL and fibula, and horizontal cross-sections showed an oval-shaped adipose tissue surrounding the tendon. The cross-sectional area on MRI was 14.4 mm2 (11.7-16.7) for the FHL tendon and 120.5 mm2 (100.3-149.4) for the adipose tissue. Additionally, the volume of the adipose tissue was 963.3 mm3 (896.2-1115.6). There is an adipose tissue around FHL tendon and maybe this close anatomical relationship might influence the function of the tendon and be involved in its pathologies.
Subject(s)
Adipose Tissue , Cadaver , Magnetic Resonance Imaging , Tendons , Humans , Tendons/anatomy & histology , Adipose Tissue/anatomy & histology , Adipose Tissue/diagnostic imaging , Male , Female , Aged , Aged, 80 and over , Middle Aged , Ankle Joint/anatomy & histology , Ankle Joint/diagnostic imagingABSTRACT
This study aimed to delineate the detailed anatomy of the metacarpophalangeal (MCP) and metatarsophalangeal (MTP) joints in healthy horses using cone beam computed tomography (CBCT). The fetlock region of 15 cadaveric forelimbs and 14 cadaveric hindlimbs from nine adult horses without orthopaedic disease underwent CBCT scanning. Additionally, arthrography CBCT scans were conducted following intra-articular injection of a radiopaque contrast medium containing blue epoxy resin dye. Subsequently, limbs were frozen and sectioned to visualize anatomical structures in sectional planes corresponding to selected CBCT images. CBCT proved suitable for detailed visualization of the bony components of the fetlock region. Furthermore, the common digital extensor tendon, superficial and deep digital flexor tendons, suspensory ligament, and straight and oblique sesamoidean ligaments were identifiable on CBCT images. However, certain ligaments, such as the collateral sesamoidean ligaments and intersesamoidean ligaments, were not clearly identified. The hyaline cartilage of the MCP and MTP joint facets was assessable on the post-contrast sequence. In cases where a radiographic or ultrasound examination cannot provide a definitive diagnosis and determine the extent of disease, CBCT can provide additional valuable data on the equine MCP and MTP joint. The images obtained in this study can serve as a reference for CBCT examination of the equine MCP and MTP joint.
Subject(s)
Cone-Beam Computed Tomography , Forelimb , Hindlimb , Animals , Horses/anatomy & histology , Cone-Beam Computed Tomography/veterinary , Forelimb/anatomy & histology , Forelimb/diagnostic imaging , Hindlimb/anatomy & histology , Hindlimb/diagnostic imaging , Metacarpophalangeal Joint/anatomy & histology , Metacarpophalangeal Joint/diagnostic imaging , Metatarsophalangeal Joint/anatomy & histology , Metatarsophalangeal Joint/diagnostic imaging , Tendons/anatomy & histology , Tendons/diagnostic imaging , Cadaver , Anatomy, Cross-Sectional , Ligaments/anatomy & histology , Ligaments/diagnostic imaging , Ligaments, Articular/anatomy & histology , Ligaments, Articular/diagnostic imaging , Arthrography/veterinary , Arthrography/methodsABSTRACT
PURPOSE: A deep knowledge of the variations of the posterior forearm musculature is crucial for assessing and diagnosing conditions in this region. Extensor indicis (EI) is one of the muscles in this region, which exhibits diverse anatomical variations. This report documents an extremely unusual form of the EI with an accessory head on the dorsum of the hand. METHODS: During routine dissection, an extremely rare presentation of the EI was found in the left forearm of a 94-year-old female cadaver. RESULTS: This unusual EI consisted of two muscle bellies. The traditional belly originated from the distal two-thirds of the ulna. The muscle became tendinous around the carpal area, distal to the extensor retinaculum. The tendon was subsequently joined by an accessory muscle belly originating from the distal radioulnar ligament. The EI tendon inserted onto the dorsal expansion of the index finger, ulnar to that of the extensor digitorum. The posterior interosseous nerve innervated the muscle. CONCLUSION: Herein, we report an extremely rare form of the EI. To our knowledge, EI with an accessory head has only been reported rarely over the past 200 years. Moreover, our report appears to be the first case with photographic details of this anatomical variation. Clinicians should be aware of this variation for proper diagnosis and treatment.
Subject(s)
Anatomic Variation , Cadaver , Forearm , Muscle, Skeletal , Humans , Female , Aged, 80 and over , Muscle, Skeletal/abnormalities , Muscle, Skeletal/anatomy & histology , Forearm/abnormalities , Forearm/innervation , Tendons/abnormalities , Tendons/anatomy & histology , DissectionABSTRACT
BACKGROUND: Current anatomical knowledge of the origin of the bucinator muscle (BM), i.e., long thin attachments on the maxilla and mandible and the pterygomandibular raphe (PMR), is not supported by anatomical dissection of this muscle. The aim of this study was therefore to investigate the detailed morphology of the BM and associated structures and to discuss its function. METHODS: The anatomy of the BM and related structures was investigated in 15 cadaveric heads using a surgical microscope and histological analysis. RESULTS: The inferior fibers of the BM originated from a small retromolar area (internal oblique line), which shared a common tendon with the deep tendon of the temporalis. The superior fibers of the BM originated from the maxillary tuberosity. The middle fibers originated the pterygoid hamulus. No PMR was identified in any of the specimens, but the border between the BM and superior pharyngeal constrictor muscle (SC) was clear because the muscle fibers followed different directions. Some horizontal fibers were continuous between the BM and SC. CONCLUSIONS: Our results suggest the need to revise established accounts of the origins of the bucinator (the maxillary tuberosity, conjoint tendon of the temporalis, and pterygoid hamulus without a pterygomandibular raphe. It also needs to be noted that some of its fibers merge directly with the SC.
Subject(s)
Cadaver , Humans , Male , Female , Aged , Aged, 80 and over , Tendons/anatomy & histology , Mandible/anatomy & histology , Pterygoid Muscles/anatomy & histology , Maxilla/anatomy & histology , Middle AgedABSTRACT
BACKGROUND: Methodological heterogeneity hinders data comparisons across isolated studies of tendon and ligament properties, limiting clinical understanding and affecting the development and evaluation of replacement materials. PURPOSE: To create an open-access data set on the morphological, biomechanical, and biochemical properties of clinically important tendons and ligaments of the lower limb, using consistent methodologies, to enable direct tendon/ligament comparisons. STUDY DESIGN: Descriptive laboratory study. METHODS: Nineteen distinct lower limb tendons and ligaments were retrieved from 8 fresh-frozen human cadavers (5 male, 3 female; aged 49-65 years) including Achilles, tibialis posterior, tibialis anterior, fibularis (peroneus) longus, fibularis (peroneus) brevis, flexor hallucis longus, extensor hallucis longus, plantaris, flexor digitorum longus, quadriceps, patellar, semitendinosus, and gracilis tendons; anterior cruciate, posterior cruciate, medial collateral, and lateral collateral ligaments; and 10 mm-wide grafts from the contralateral quadriceps and patellar tendons. Outcomes included morphology (tissue length, ultrasound-quantified cross-sectional area [CSAUS], and major and minor axes), biomechanics (failure load, ultimate tensile strength [UTS], failure strain, and elastic modulus), and biochemistry (sulfated glycosaminoglycan [sGAG] and hydroxyproline contents). Tissue differences were analyzed using mixed-model regression. RESULTS: There was a range of similarities and differences between tendons and ligaments across outcomes. A key finding relating to potential graft tissue suitability was the comparable failure loads, UTS, CSAUS, sGAG, and hydroxyproline present between hamstring tendons (a standard graft source) and 5 tendons not typically used for grafting: fibularis (peroneus) longus and brevis, flexor and extensor hallucis longus, and flexor digitorum longus tendons. CONCLUSION: This study of lower limb tendons and ligaments has enabled direct comparison of morphological, biomechanical, and biochemical human tissue properties-key factors in the selection of suitable graft tissues. This analysis has identified 6 potential new donor tissues with properties comparable to currently used grafts. CLINICAL RELEVANCE: This extensive data set reduces the need to utilize data from incompatible sources, which may aid surgical decisions (eg, evidence to expand the range of tendons considered suitable for use as grafts) and may provide congruent design inputs for new biomaterials and computational models. The complete data set has been provided to facilitate further investigations, with the capacity to expand the resource to include additional outcomes and tissues.
Subject(s)
Cadaver , Ligaments , Lower Extremity , Tendons , Humans , Male , Female , Middle Aged , Tendons/anatomy & histology , Tendons/physiology , Aged , Biomechanical Phenomena , Ligaments/anatomy & histology , Ligaments/physiology , Lower Extremity/anatomy & histology , Lower Extremity/physiology , Tensile Strength/physiologyABSTRACT
PURPOSE: The rectus femoris forms the anterior portion of the quadriceps muscle. It has a proximal tendinous complex, which is constituted by a direct tendon, an indirect tendon, and a variable third tendon. Direct and indirect tendons converge into a common tendon. The purposes of this study are to add anatomical knowledge about the proximal tendinous complex and describe anatomical variants of the indirect tendon and, on these basis, categorize different anatomical patterns. METHOD: In this study, 48 hemipelvis from bodies donated to the Universitat Autònoma de Barcelona have been dissected to examine the proximal tendinous complex of the rectus femoris. RESULTS: The following anatomical variants of the indirect tendon were described: inferior aponeurotic expansion in 23/48 cases (47.9%); superior aponeurotic expansion in 21/48 cases (43.7%); and an unusual origin of the myotendinous junction of the rectus femoris in the free portion of the indirect tendon in 19/48 cases (39.6%). On the basis of the aponeurotic expansions, the following anatomical patterns of the indirect tendon were defined: standard (19/48 cases, 39.6%), superior and inferior complex (15/48 cases, 31.2%), inferior complex (8/48 cases, 16.7%), and superior complex (6/48 cases, 12.5%). CONCLUSION: We can categorize four different anatomical patterns of the indirect tendon, three of which are complex. We suggest that complex patterns can cause an increased stiffness of the indirect tendon and so be considered non-modifiable risk factors for rectus femoris injuries. Finally, it would be useful to identify complex patterns and perform injury prevention actions through specific physical preparation programs.
Subject(s)
Anatomic Variation , Cadaver , Quadriceps Muscle , Tendons , Humans , Quadriceps Muscle/anatomy & histology , Tendons/anatomy & histology , Male , Female , Aged , Aged, 80 and over , Dissection , Middle AgedABSTRACT
BACKGROUND: Hallux valgus (HV) is a complex deformity, with many associated risk factors. The flexor hallucis longus (FHL) tendon is a dynamic and potentially deforming force as it bowstrings laterally with HV. We hypothesized that FHL is more laterally inserted in the distal phalanx in cadavers with HV; therefore, it might be also a primary destabilizing force. We aim to compare the FHL distal insertion morphology and its relationship with osseous structures in cadavers with and without HV. METHODS: Sixteen cadaver specimens, 8 with HV and 8 without (N-HV) were dissected. We evaluated FHL distal morphology in terms of its insertional footprint location and FHL long-axis position in relation to osseous anatomy. RESULTS: Both the HV and N-HV groups displayed a laterally inserted footprint at the distal phalanx, with the HV group exhibiting median lateral translation of the footprint 6% greater than the N-HV group (P < .01). Both groups also demonstrated a laterally displaced position for the FHL long axis. The median FHL long axis for HV vs N-HV specimens 1 cm proximal to the IP joint was 9% more laterally displaced from the midaxis (P < .01), and at 1 cm proximal to the MTP joint was measured to be 15% more laterally displaced from the midaxis (P < .01). CONCLUSION: FHL demonstrated an eccentric position in terms of insertion and trajectory in both the HV and N-HV groups, with greater lateralization in specimens exhibiting HV deformity. This eccentricity potentially creates a greater deforming force vector contributing to the development of HV. CLINICAL RELEVANCE: The etiology and progression of HV deformity may include a lateralized insertion of the FHL tendon. Treatment implications remain unknown at this time.
Subject(s)
Cadaver , Hallux Valgus , Tendons , Humans , Hallux Valgus/pathology , Tendons/anatomy & histology , Aged , Male , FemaleABSTRACT
PURPOSE: The short external rotator muscles (SERMs) of the hip are composed of six postural muscles that constitute a single functional unit that is aligned to coapt the articular surfaces of the hip joint, providing dynamic stability. This study aims to provide a morphometric evaluation of this unit that could benefice clinical practice. In particular, the implication of the morphology and direction of the hip triceps tendon when performing a posterolateral approach for total hip arthroplasty. METHODS: A total of 18 cadaveric hips were dissected rigorously. Variations of the origin, course and insertion of all SERMs were recorded and quantified. Measurements were conducted for the following parameters: total muscle lengths, intra-muscular and extra-muscular tendon lengths, muscle sagittal and frontal angles, and femoral neck length. Correlation was searched for between total muscle length and femoral neck length. RESULTS: Results were as follows: (a) the obturator internus and externus muscles insert quasi perpendicularly on the proximal femur, (b) both gemelli take distal insertion onto the tendon of the obturator internus to form the hip triceps tendon, (c) morphometric data of the studied parameters was reported, and (d) moderate to high correlation with femoral neck length was found for all muscles but the quadratus femoris. CONCLUSION: Our results showed that the direction of the hip triceps tendon is always orthogonal to the proximal femur in the frontal plane. Such anatomical reference could be used when performing total hip arthroplasty with the posterolateral approach. Future research is needed to assess whether the easy identification and re-insertion of the hip triceps could reduce leg length discrepancy and offset.
Subject(s)
Cadaver , Humans , Male , Female , Aged , Muscle, Skeletal/anatomy & histology , Aged, 80 and over , Hip Joint/anatomy & histology , Arthroplasty, Replacement, Hip/methods , Anatomic Variation , Middle Aged , Tendons/anatomy & histologyABSTRACT
The mallard webbed foot represents an exemplary model of biomechanical efficiency in avian locomotion. This study delves into the intricate material assembly and tendon morphology of the mallard webbed foot, employing both macroscopic and microscopic analyses. Through histological slices and scanning electron microscopy (SEM), we scrutinized the coupling assembly of rigid and flexible materials such as skin, tendon, and bone, while elucidating the biomechanical functions of tendons across various segments of the tarsometatarsophalangeal joint (TMTPJ). The histological examination unveiled a complex structural hierarchy extending from the external integument to the skeletal framework. Notably, the bone architecture, characterized by compact bone and honeycombed trabeculae, showcases a harmonious blend of strength and lightweight design. Tendons, traversing the phalangeal periphery, surrounded by elastic fibers, collagen fibers, and fat tissue. Fat chambers beneath the phalanx, filled with adipocytes, provide effective buffering, enabling the phalanx to withstand gravity, provide support, and facilitate locomotion. Furthermore, SEM analysis provided insights into the intricate morphology and arrangement of collagen fiber bundles within tendons. Flexor tendons in proximal and middle TMTPJ segments adopt a wavy-type, facilitating energy storage and release during weight-bearing activities. In contrast, distal TMTPJ flexor tendons assume a linear-type, emphasizing force transmission across phalangeal interfaces. Similarly, extensor tendons demonstrate segment-specific arrangements tailored to their respective biomechanical roles, with wavy-type in proximal and distal segments for energy modulation and linear-type in middle segments for enhanced force transmission and tear resistance. Overall, our findings offer a comprehensive understanding of the mallard webbed foot's biomechanical prowess, underscoring the symbiotic relationship between material composition, tendon morphology, and locomotor functionality. This study not only enriches our knowledge of avian biomechanics but also provides valuable insights for biomimetic design and tissue engineering endeavors.
Subject(s)
Foot , Microscopy, Electron, Scanning , Tendons , Animals , Tendons/physiology , Tendons/ultrastructure , Tendons/anatomy & histology , Biomechanical Phenomena , Foot/physiology , Foot/anatomy & histology , Locomotion/physiologyABSTRACT
The extensor digitorum profundus complex underwent degeneration of the ulnar segments during primate adaptation and evolution. This process resulted in the preservation of only the extensor pollicis longus and extensor indicis in some apes, including humans. Consequently, anatomical variations within the digitorum profundus complex in modern humans have been well-documented, with detailed reports on their frequency and patterns in previous studies. Here, we report an unusual arrangement involving two anomalies in the extensor digitorum profundus complex, identified in a 66-year-old Japanese male cadaver. In this cadaver, two accessory muscles differentiated from both the extensor pollicis longus and extensor indicis. Notably, the latter muscle featured a tendon bifurcating towards both the thumb and index fingers, referred to as the extensor pollicis et indicis communis. Under the extensor retinaculum, the tendon of the accessory extensor pollicis longus passed through an independent compartment, whereas that of the extensor pollicis et indicis communis traversed a compartment shared by the extensor indicis and the extensor digitorum communis. Both muscles were innervated by the posterior interosseous nerve. Previous studies have reported that the accessory slip of the extensor pollicis longus and extensor pollicis et indicis communis appear at frequencies of 0.6% and 0.4-1.4%, respectively. However, to the best of our knowledge, a configuration in which both appear simultaneously has not been reported. The data from this case could provide essential insights into the variations in the extensor digitorum profundus complex in humans and non-human primates.
Subject(s)
Cadaver , Muscle, Skeletal , Tendons , Humans , Male , Aged , Muscle, Skeletal/abnormalities , Muscle, Skeletal/anatomy & histology , Tendons/abnormalities , Tendons/anatomy & histology , Fingers/abnormalities , Fingers/anatomy & histology , Anatomic Variation , Thumb/abnormalitiesABSTRACT
Connective tissue attaches to bone across an insertion with spatial gradients in components, microstructure, and biomechanics. Due to regional stress concentrations between two mechanically dissimilar materials, the insertion is vulnerable to mechanical damage during joint movements and difficult to repair completely, which remains a significant clinical challenge. Despite interface stress concentrations, the native insertion physiologically functions as the effective load-transfer device between soft tissue and bone. This review summarizes tendon, ligament, and meniscus insertions cross-sectionally, which is novel in this field. Herein, the similarities and differences between the three kinds of insertions in terms of components, microstructure, and biomechanics are compared in great detail. This review begins with describing the basic components existing in the four zones (original soft tissue, uncalcified fibrocartilage, calcified fibrocartilage, and bone) of each kind of insertion, respectively. It then discusses the microstructure constructed from collagen, glycosaminoglycans (GAGs), minerals and others, which provides key support for the biomechanical properties and affects its physiological functions. Finally, the review continues by describing variations in mechanical properties at the millimeter, micrometer, and nanometer scale, which minimize stress concentrations and control stretch at the insertion. In summary, investigating the contrasts between the three has enlightening significance for future directions of repair strategies of insertion diseases and for bioinspired approaches to effective soft-hard interfaces and other tough and robust materials in medicine and engineering.
Subject(s)
Tendons , Humans , Biomechanical Phenomena/physiology , Tendons/physiology , Tendons/anatomy & histology , Animals , Bone and Bones/physiology , Ligaments/physiology , Fibrocartilage/physiology , Fibrocartilage/chemistry , Fibrocartilage/metabolism , Collagen/chemistry , Collagen/metabolism , Stress, MechanicalABSTRACT
Surgical intervention is a common option for the treatment of wrist joint arthritis and traumatic wrist injury. Whether this surgery is arthrodesis or a motion preserving procedure such as arthroplasty, wrist joint biomechanics are inevitably altered. To evaluate effects of surgery on parameters such as range of motion, efficiency and carpal kinematics, repeatable and controlled motion of cadaveric specimens is required. This study describes the development of a device that enables cadaveric wrist motion to be simulated before and after motion preserving surgery in a highly controlled manner. The simulator achieves joint motion through the application of predetermined displacements to the five major tendons of the wrist, and records tendon forces. A pilot experiment using six wrists aimed to evaluate its accuracy and reproducibility. Biplanar X-ray videoradiography (BPVR) and X-Ray Reconstruction of Moving Morphology (XROMM) were used to measure overall wrist angles before and after total wrist arthroplasty. The simulator was able to produce flexion, extension, radioulnar deviation, dart thrower's motion and circumduction within previously reported functional ranges of motion. Pre- and post-surgical wrist angles did not significantly differ. Intra-specimen motion trials were repeatable; root mean square errors between individual trials and average wrist angle and tendon force profiles were below 1° and 2 N respectively. Inter-specimen variation was higher, likely due to anatomical variation and lack of wrist position feedback. In conclusion, combining repeatable intra-specimen cadaveric motion simulation with BPVR and XROMM can be used to determine potential effects of motion preserving surgeries on wrist range of motion and biomechanics.
Subject(s)
Cadaver , Range of Motion, Articular , Wrist Joint , Humans , Wrist Joint/surgery , Wrist Joint/diagnostic imaging , Wrist Joint/physiology , Wrist Joint/anatomy & histology , Biomechanical Phenomena , Radiography/methods , Male , Aged , Reproducibility of Results , Tendons/surgery , Tendons/diagnostic imaging , Tendons/physiology , Tendons/anatomy & histology , FemaleABSTRACT
Previous studies have poorly described the initial development process of the tendinous intersections of the rectus abdominis muscle (RAM). The present study aimed to observe the formation of tendinous intersections in the RAM during the early fetal period using diffusion tensor imaging (DTI). Fifteen human fetal specimens (crown-rump length [CRL]: 39.5-93.7 mm) were selected. Three-dimensional measurements revealed that Zone-4 (i.e., the zone between the pubic symphysis and the caudal base of the umbilical ring in the RAM) had a smaller width and was thicker than Zone-1 and Zone-2 (i.e., the zones between the costal arch and the cranial base of the umbilical ring) and Zone-3 (i.e., the zone at the umbilical ring). Characteristics of tendinous intersections in the RAM during the early fetal period were assessed according to number, size, type, laterality, and sex. The mean number of tendinous intersections on both sides was 3.1 (range: 2.0-4.0), and 21% of specimens had only two tendinous intersections, which was higher than that reported in previous adult studies. The present data suggest that the formation of tendinous intersections was still in progress in specimens with two tendinous intersections in the RAM and that the third tendinous intersection was formed in Zone-2. Ordinal logistic regression via generalized estimating equations revealed that the odds for a higher type of tendinous intersections in Zone-1 and Zone-2 were significantly higher than those in Zone-4 (adjusted odds ratio: 14.85, 8.84). The odds for the presence of incomplete types (tendinous intersections that could not completely transverse the RAM) in Zone-3 were significantly higher than those in Zone-1 (adjusted odds ratio: 7.4). The odds for missing tendinous intersections in Zone-4 were significantly higher than those in Zone-1 (adjusted odds ratio: 20.5). These zonal differences in the formation of tendinous intersections were consistent with those observed in previous adult studies. In this study, DTI detected tendinous intersections in a sample with a CRL of 45.8 mm (approximately 11 weeks of gestation), which is earlier than that in previous histological findings, indicating that the RAM does not have mature tendinous intersections until the 17th week of gestation. In conclusion, DTI could detect the premature differentiation of tendinous intersection formation. Our data may aid in elucidating the developmental processes of tendinous intersections in the RAM.
Subject(s)
Fetus , Rectus Abdominis , Tendons , Humans , Rectus Abdominis/embryology , Rectus Abdominis/diagnostic imaging , Rectus Abdominis/anatomy & histology , Female , Male , Fetus/anatomy & histology , Fetus/diagnostic imaging , Tendons/embryology , Tendons/anatomy & histology , Diffusion Tensor Imaging/methodsABSTRACT
The adductor magnus ischiocondylar origin (AM-IO) tendon has often been described as a third proximal hamstring tendon due to its common origin on the ischial tuberosity as well as similar function. Prior studies have described the magnetic resonance imaging characteristics of the AM-IO; however, its appearance on ultrasound has not been well-detailed. The purpose of our study is to describe the sonographic appearance of the AM-IO and provide a structured scanning protocol for complete evaluation of the tendon.
Subject(s)
Ultrasonography , Humans , Ultrasonography/methods , Male , Female , Adult , Tendons/diagnostic imaging , Tendons/anatomy & histology , Ischium/diagnostic imaging , Muscle, Skeletal/diagnostic imaging , Muscle, Skeletal/anatomy & histology , Middle AgedABSTRACT
Tarsal joint illness is a frequent source of hind limb lameness due to the complex anatomy of the region and the presence of numerous bony and soft tissue structures. Proper lameness diagnosis aims to discover the structure provoking lameness. Ultrasonography documents valuable information of soft tissues and characterizes soft tissue injuries that have heretofore been difficult to obtain either noninvasively or via radiography. The objectives of the current study were to develop and describe a standardized ultrasonographic protocol for investigation of the tarsal region in donkeys. The donkey tarsal anatomy was investigated in 5 cadavers and the tarsi of 11 healthy lameness free adult donkeys were echographically investigated. The dorsal, plantar, lateral and medial aspects of the tarsal region were substantially evaluated at four anatomical landmarks in both the longitudinal and horizontal planes using a multi-frequency 5-12 MHz linear transducer. Sonoanatomy of the extensor and flexor tarsal tendons, collateral and plantar ligaments, and synovial pouches was delineated and described. Systematic echography of the tarsal region allowed accurate localization and thorough exploration of various soft tissues of clinical interest in the donkey tarsus. Sonograms provided in this study should serve as a reference database for tarsal ultrasonography in clinical circumstances.
Subject(s)
Equidae , Ultrasonography , Animals , Equidae/anatomy & histology , Ultrasonography/methods , Ultrasonography/veterinary , Tarsus, Animal/diagnostic imaging , Tarsus, Animal/anatomy & histology , Tendons/diagnostic imaging , Tendons/anatomy & histologyABSTRACT
This study aimed to describe the shoulder anatomy, together with the anatomical relationships in adults and early stages of development. The shoulder muscles were studied from ultrasound, anatomical, and microscopic perspectives in a sample of 34 human shoulders. Thickness measurements were taken of the tendons and fasciae of the subscapularis, long head tendon of the biceps brachii, supraspinatus, infraspinatus, and teres minor. Ultrasound and dissection techniques are strongly correlated. However, the measurements obtained from the dissection technique were superior to those obtained from the ultrasound in all cases, except for the thickness of the long head tendon of the biceps brachii, the teres minor tendon, and the fascia thickness of the infraspinatus. In addition, the study of shoulder anatomy revealed no differences between females and males. Relevant findings from dissection included a clear overlap between the infraspinatus and supraspinatus, which shared tendon fibers, and a similar connection between the transverse ligament of the long head tendon of the biceps brachii and the subscapularis, which created a more interconnected shoulder function. The study of the anatomical measurements shows an underestimation of the shoulder measurements in the ultrasound compared with the dissection technique, but a high correlation between the measurements made by the two techniques. We present reference values for the tendon and fascia thicknesses of the rotator cuff, with no differences observed by gender. The relationships between shoulder structures described in the anatomical study imply as well that, in the event of an injury, adjacent tissues may be affected. This extended information may facilitate future optimal clinical explorations.
Subject(s)
Shoulder , Tendons , Ultrasonography , Humans , Ultrasonography/methods , Male , Female , Shoulder/anatomy & histology , Shoulder/diagnostic imaging , Tendons/anatomy & histology , Tendons/diagnostic imaging , Rotator Cuff/diagnostic imaging , Rotator Cuff/anatomy & histology , Muscle, Skeletal/anatomy & histology , Muscle, Skeletal/diagnostic imaging , Adult , Dissection , Shoulder Joint/anatomy & histology , Shoulder Joint/diagnostic imaging , Middle Aged , AgedABSTRACT
PURPOSE: To evaluate the utility of semitendinosus tendon (ST) and gracilis tendon (GT) cross-sectional area (CSA) on magnetic resonance imaging (MRI) and anthropometric characteristics in preoperative estimation of graft diameter in patients undergoing anterior cruciate ligament reconstruction (ACLR) with four-strand hamstring autografts. METHODS: Three databases were searched on 29 August 2023. The authors adhered to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) and R-AMSTAR (Revised Assessment of Multiple Systematic Review) guidelines and the Cochrane Handbook for Systematic Reviews of Interventions. Data on demographics, anthropometric characteristics, imaging techniques, tendon CSA, correlation coefficients, sensitivities, specificities, regression models and cutoffs for predicting intraoperative graft diameters above 8 mm were recorded. RESULTS: Forty-six studies comprising 4140 patients were included. Twelve of 19 (63.2%) studies reporting on ST + GT CSA found a moderate to very high correlation with intraoperative graft diameter. Five of 10 (50%) and one of seven (14.3%) studies reporting on ST CSA and GT CSA, respectively, found a moderate to high correlation with intraoperative graft diameter. Cutoffs of ST + GT CSA for predicting graft diameters above 8 mm ranged from 15.8 to 31.2 mm2. Nine of 35 (25.7%) studies that reported on height found a moderate to very high correlation with graft diameter. Seven of 33 (21.2%) studies reporting on weight found a moderate correlation with graft diameter. CONCLUSION: Of the MRI parameters assessed, ST + GT CSA was the most reliable predictor of graft diameter. However, cutoffs, sensitivities, and specificities for predicting diameters above 8 mm were highly variable. Anthropometric characteristics in general were less predictive of graft diameter than MRI parameters. This information can be used by clinicians to predict patients at risk for ACLR failure due to insufficient graft size. LEVEL OF EVIDENCE: Level IV.
Subject(s)
Anterior Cruciate Ligament Reconstruction , Autografts , Hamstring Tendons , Magnetic Resonance Imaging , Humans , Anterior Cruciate Ligament Reconstruction/methods , Magnetic Resonance Imaging/methods , Hamstring Tendons/transplantation , Hamstring Tendons/anatomy & histology , Hamstring Tendons/diagnostic imaging , Autografts/diagnostic imaging , Anterior Cruciate Ligament Injuries/surgery , Anterior Cruciate Ligament Injuries/diagnostic imaging , Anthropometry , Tendons/transplantation , Tendons/diagnostic imaging , Tendons/anatomy & histology , Transplantation, AutologousABSTRACT
Disability due to iliopsoas (IP) pain and dysfunction is underdiagnosed in the athletic population. The IP unit consists of the psoas major and iliacus muscles converging to form the IP tendon and is responsible primarily for hip flexion strength but has a number of secondary contributions such as femoral movement, trunk rotation, core stabilization, and dynamic anterior stability to the hip joint. As the IP passes in front of the anterior acetabulum and labrum, the diagnosis of IP pain may be confused with labral tearing seen on magnetic resonance imaging. This is in addition to the low sensitivity of magnetic resonance imaging to detect IP tendinitis and bursitis. Resisted seated hip flexion as well as direct palpation of the IP tendon and muscle belly are useful to assess function and help determine whether the IP may be the source of pain, which is common in athletes. Both biomechanical and clinical investigations have demonstrated the role of IP as an anterior hip stabilizer. Patients with signs of hip microinstability, developmental dysplasia of the hip, and increased femoral anteversion are at risk of IP pain and poor outcomes after IP lengthening, highlighting the importance of the IP in providing dynamic anterior hip stability.
Subject(s)
Hip Joint , Psoas Muscles , Humans , Psoas Muscles/diagnostic imaging , Psoas Muscles/physiopathology , Hip Joint/physiopathology , Hip Joint/diagnostic imaging , Athletes , Arthralgia/etiology , Arthralgia/physiopathology , Magnetic Resonance Imaging , Biomechanical Phenomena , Tendons/physiopathology , Tendons/anatomy & histology , Tendinopathy/physiopathology , Tendinopathy/diagnostic imaging , Athletic Injuries/physiopathology , Athletic Injuries/diagnosisABSTRACT
BACKGROUND: In adults, the intermediate tendon of digastricus muscle usually runs along the medial or lateral side of the stylohyoideus muscle insertion. To provide a better understanding of the variations, we examined the topographical anatomy of the muscle and tendon in fetuses. METHODS: We examined histological sections from six early-term, 26 mid-term and six near-term fetuses (approximately 8-9, 12-18 weeks and 25-33 weeks). RESULTS: At early-term, an initial sheath of intermediate tendon of digastricus muscle received the stylohyoideus muscle at the superior aspect. The muscle and tendon was distant from the hyoid. At mid-term, near the insertion to the hyoid greater horn, the stylohyoideus muscle consistently surrounded more than 2/3 of the intermediate tendon circumference. In contrast, we found no near-term specimen in which the stylohyoideus muscle surrounded the intermediate tendon. The multilayered tendon sheath was fully developed until near-term and connected to the body of hyoid by an intermuscular septum between the thyrohyoideus muscle and one or two of suprahyoid muscles. Therefore, the hyoid insertion of the styloglossus muscle was a transient morphology at mid-term. CONCLUSION: The stylohyoideus muscle insertion was appeared to move from the tendon sheath to the hyoid greater horn and, until near-term, return to the tendon sheath. A fascia connecting the tendon sheath to the body of hyoid was strengthened by the suprahyoid and infrahyoid muscles. The latter muscles seemed to regulate fixation/relaxation of the intermediate tendon to the hyoid. The stylohyoideus muscle slips sandwiching the intermediate tendon might be a rare morphology.