ABSTRACT
Identification of the sex of modern, fossil and archaeological animal remains offers many insights into their demography, mortality profiles and domestication pathways. However, due to many-factors, sex determination of osteological remains is often problematic. To overcome this, we have developed an innovative protocol to determine an animal's sex from tooth enamel, by applying label-free quantification (LFQ) of two unique AmelY peptides 'LRYPYP' (AmelY;[M+2] 2 + 404.7212 m/z) and 'LRYPYPSY' (AmelY;[M+2] 2 + 529.7689 m/z) that are only present in the enamel of males. We applied this method to eight modern cattle (Bos taurus) of known sex, and correctly assigned them to sex. We then applied the same protocol to twelve archaeological Bos teeth from the Neolithic site of Beisamoun, Israel (8-th-7-th millennium BC) and determined the sex of the archaeological samples. Since teeth are usually better preserved than bones, this innovative protocol has potential to facilitate sex determination in ancient and modern bovine remains that currently cannot be sexed.
Subject(s)
Archaeology , Dental Enamel , Sex Determination Analysis , Cattle , Animals , Dental Enamel/chemistry , Male , Female , Sex Determination Analysis/methods , Archaeology/methods , Fossils , Tooth/anatomy & histology , Tooth/chemistry , IsraelABSTRACT
Electron spin resonance coupled with uranium-series dating (ESR/U-series) of carbonate hydroxyapatite in tooth enamel is the main technique used to obtain age determinations from Pleistocene fossils beyond the range of radiocarbon dating. This chronological information allows to better understand diachronic change in the palaeontological record, especially with regard to the evolution of the genus Homo. Given the relative paucity of human teeth at palaeontological and archaeological localities, ESR/U-series is widely applied to the teeth of ungulate species. However, the accuracy of ESR/U-series ages is greatly affected by the incorporation of uranium in the enamel during burial in sediments. It has been shown that uranium content is positively correlated with an increased degree of atomic order in carbonate hydroxyapatite crystals, the latter determined using infrared spectroscopy. Here we present a reference infrared spectral library of tooth enamel from African ungulates, based on the grinding curve method, which serves as baseline to track the diagenetic history of carbonate hydroxyapatite in different species and thus select the best-preserved specimens for dating.
Subject(s)
Dental Enamel , Fossils , Dental Enamel/chemistry , Electron Spin Resonance Spectroscopy , Animals , Radiometric Dating , Durapatite/chemistry , Durapatite/analysis , Uranium/analysis , Tooth/chemistry , Spectrophotometry, Infrared , HominidaeABSTRACT
OBJECTIVES: The fluorescence-aided identification technique (FIT) is based on the fluorescence properties of dental materials, specifically the intensity of their fluorescence compared to the autofluorescence of hard dental substances; this creates a perceived contrast between dental material and tooth. However, no studies to date have determined the extent to which the fluorescence intensity of tooth-colored dental materials must differ from that of natural autofluorescence to ensure reliable visual detection. The aim of this study was therefore to determine, for the first time, how pronounced the difference between fluorescence intensity and autofluorescence must be to reliably identify tooth-colored material. METHODS: Ten dentists assessed six different resin-based composite (RBC) samples of varying fluorescence intensity placed in the cavities of ten extracted teeth under standardized fluorescence-exciting illumination. The outcome variable was fluorescence perceptibility. Their assessments of the outcome variable were compared with measurements of the fluorescence intensities of the RBCs and the surrounding dental hard tissues, which were expressed as a fluorescence intensity ratio. Demographic data of the participants, including age, gender, and professional experience, were also recorded. RESULTS: No significant differences were found for visual fluorescence perceptibility in relation to the explanatory variables of gender (p = 0.14), age (p = 0.13), and professional experience (p = 0.34). In contrast, the fluorescence intensity ratio was significantly different (p < 0.0001). SIGNIFICANCE: For both clinicians and manufacturers, fluorescence intensity levels are important when selecting or developing FIT-compatible materials. Our results suggest that the fluorescence intensity levels of dental materials should be no more than 75% and no less than 200% of tooth natural autofluorescence to ensure reliable detection of tooth-colored materials.
Subject(s)
Composite Resins , Humans , Fluorescence , Male , Female , Composite Resins/chemistry , Adult , Dental Materials/chemistry , Middle Aged , Tooth/diagnostic imaging , Tooth/chemistry , ColorABSTRACT
This research examines animal teeth from Early Dynastic (2900-2350 BCE) Mesopotamia (Southern Iraq) to assess animal management practices and identify consumption patterns in animal diets. The objective to answer larger questions about food management and environmental resilience in ancient early complex societies in the Near East was achieved by the use of mass spectrometry-based proteomics for dietary reconstruction. Dietary MS, a revolutionary new methodology applying proteomics techniques to archeological sample sets to reconstruct ancient animal diet. A developed protein extraction technique followed by liquid chromatography tandem mass spectrometry allowed for the identification of the specific plant species consumed in order to highlight variable herd management strategies, resource optimization, for each taxon over time. It also provided information about overall health and indications of disease. This is the first study to apply a full suite of analyses to the region and provides the foundations of a necessary long-term view of human interaction within an environment, through both time and space.
Subject(s)
Diet , Proteomics , Tandem Mass Spectrometry , Tooth , Animals , Proteomics/methods , Tooth/chemistry , Tandem Mass Spectrometry/methods , Iraq , Chromatography, Liquid , History, Ancient , Humans , Archaeology/methods , FossilsABSTRACT
Bolt's Farm is the name given to a series of non-hominin bearing fossil sites that have often been suggested to be some of the oldest Pliocene sites in the Cradle of Humankind, South Africa. This article reports the results of the first combined Uranium-Series and Electron Spin Resonance (US-ESR) dating of bovid teeth at Milo's Cave and Aves Cave at Bolt's Farm. Both tooth enamel fragments and tooth enamel powder ages were presented for comparison. US-ESR, EU and LU models are calculated. Overall, the powder ages are consistent with previous uranium-lead and palaeomagnetic age estimates for the Aves Cave deposit, which suggest an age between ~3.15 and 2.61 Ma and provide the first ages for Milo's Cave dates to between ~3.1 and 2.7 Ma. The final ages were not overly dependent on the models used (US-ESR, LU or EU), which all overlap within error. These ages are all consistent with the biochronological age estimate (<3.4->2.6 Ma) based on the occurrence of Stage I Metridiochoerus andrewsi. Preliminary palaeomagnetic analysis from Milo's Cave indicates a reversal takes place at the site with predominantly intermediate directions, suggesting the deposit may date to the period between ~3.03 and 3.11 Ma within error of the ESR ages. This further suggests that there are no definitive examples of palaeocave deposits at Bolt's Farm older than 3.2 Ma. This research indicates that US-ESR dating has the potential to date fossil sites in the Cradle of Humankind to over 3 Ma. However, bulk sample analysis for US-ESR dating is recommended for sites over 3 Ma.
Subject(s)
Fossils , Radiometric Dating , Uranium , South Africa , Electron Spin Resonance Spectroscopy/methods , Uranium/analysis , Animals , Caves/chemistry , Tooth/chemistry , Tooth/anatomy & histology , Dental Enamel/chemistryABSTRACT
Biomineralization is a natural process in which organisms regulate the growth of inorganic minerals to form biominerals with unique layered structures, such as bones and teeth, primarily composed of calcium and phosphorus. Tooth decay significantly impacts our daily lives, and the key to tooth regeneration lies in restoring teeth through biomimetic approaches, utilizing mineralization strategies or materials that mimic natural processes. This review delves into the types, properties, and transformations of calcium and phosphorus minerals, followed by an exploration of the mechanisms behind physiological and pathological mineralization in living organisms. It summarizes the mechanisms and commonalities of biomineralization and discusses the advancements in dental biomineralization research, guided by insights into calcium and phosphorus mineral biomineralization. This review concludes by addressing the current challenges and future directions in the field of dental biomimetic mineralization.
Subject(s)
Biomineralization , Calcium , Phosphorus , Tooth , Humans , Phosphorus/chemistry , Calcium/metabolism , Tooth/chemistry , AnimalsABSTRACT
Species identification following shark-related incidents is critical for effective incident management and for collecting data to inform shark-bite mitigation strategies. Witness statements are not always reliable, and species identification is often ambiguous or missing. Alternative methods for species identification include morphological assessments of bite marks, analysis of collected teeth at the scene of the incident, and genetic approaches. However, access to appropriate collection media and robust genetic assays have limited the use of genetic technologies. Here, we present a case study that facilitated a unique opportunity to compare the effectiveness of medical gauze readily available in first-aid kits, and forensic-grade swabs in collecting genetic material for shark-species identification. Sterile medical gauze and forensic-grade swabs were used to collect transfer DNA from the bite margins on a bitten surf ski which were compared to a piece of shark tissue embedded along the bite margin. Witness accounts and the characteristics of the bite mark impressions inferred the involvement of a Carcharodon carcharias (white shark). The morphology of a tooth found on the boat that picked up the surf ski, however, suggested it belonged to an Orectolobus spp. (wobbegong). Genetic analysis of DNA transferred from the shark to the surf ski included the application of a broad-target nested PCR assay followed by Sanger sequencing, with white shark contribution to the 'total sample DNA' determined with a species-specific qPCR assay. The results of the genetic analyses were congruent between sampling methods with respect to species identification and the level of activity inferred by the donor-specific DNA contribution. These data also supported the inferences drawn from the bite mark morphology. DNA from the recovered tooth was PCR amplified with a wobbegong-specific primer pair designed for this study to corroborate the tooth's morphological identification. Following the confirmation of gauze used for sampling in the case study event, two additional isolated incidents occurred and were sampled in situ using gauze, as typically found in a first-aid kit, by external personnel. DNA extracted from these gauze samples resulted in the identification of a white shark as the donor of the DNA collected from the bite marks in both instances. This study, involving three incidents separated by time and location, represents the seminal application of gauze as a sampling media after critical human-shark interactions and strongly supports the practical implementation of these methods in the field.
Subject(s)
Bites and Stings , DNA , Sharks , Sharks/genetics , Animals , DNA/genetics , Humans , Species Specificity , Specimen Handling , Polymerase Chain Reaction , DNA Fingerprinting , Tooth/chemistryABSTRACT
Biodosimetry can define risks in inhabitants of areas with potential contaminants, ensuring environmental protection and living conditions due to toxic and radioactive effects. This study aimed to evaluate metals and radionuclides in dental structures and alveolar bones in residents of a uranium area in Paraíba and Pernambuco, Brazil. Eighty-nine specimens were pulverized, fractionated, and chemically prepared for analysis by EDXRF, FAAS, and ICP-MS. Levels of Ca, Cu, Fe, Si, Mn, Ni, Pb, Sr, Ti, V, Zn, K, Mn, Th, and U were investigated. Higher concentrations were measured for Ca, with an average of 272,986.4 mg kg-1. Ni presented in lower concentrations, with an average of 30.4 mg kg-1. For U, concentrations ranged from 1.5 to 145.0 mg kg-1, with more than 27% of the samples above the reference value of 8.1 µg kg-1. For Th, almost 38% of the results were above the limit of 3.5 µg kg-1. In the bone spicules, the contents of U and Th ranged from 45.1 to 1451.2 µg kg-1 and from 7.5 to 78.4 µg kg-1, in this order. The levels of radionuclides were more expressive for the teeth collected in São José do Sabugi, suggesting contamination through food and water consumption. In the bone spicules, the levels of U were up to 179 times higher than the safety limit. The results indicate a possible risk of contamination with probable induced radiobiological effects.
Subject(s)
Radioisotopes , Uranium , Humans , Uranium/analysis , Brazil , Radioisotopes/analysis , Tooth/chemistry , Tooth/radiation effects , Metals/analysis , Male , Adult , Female , Middle AgedABSTRACT
OBJECTIVES: The objective of this study was to evaluate the effect of acidic beverages on the surface topography and elemental composition of human teeth. METHODS: A total of five highly acidic beverages (Red Bull, Pepsi, Apple Cidra, Tang Mosambi, and Tang Orange) were investigated. The tooth specimens of experimental groups were submerged in each beverage and incubated at 37 °C for 7 days, whereas, the tooth specimens of control groups were placed in distilled water. Afterwards, tooth specimens were analyzed using scanning electron microscopic (SEM), stereomicroscopic, and energy dispersive x-ray (EDX) techniques. RESULTS: All experimental groups revealed a decline in the tooth elements compared to controls, however, such decline was not statistically significant. Nevertheless, comparing the experimental groups, the Red Bull beverage caused a marked reduction in the percentage of both calcium and phosphorus elements compared to the Pepsi, Apple Cidra, Tang Mosambi, and Tang Orange beverages but it was insignificant as well in contrast to its control counterpart. All five acidic beverages demonstrated erosive potential under SEM analysis; however, each group of specimens showed a diverse amount of demineralization. In addition, all experimental groups exhibited significant discoloration of tooth specimens compared to their respective control counterparts. CONCLUSIONS: Within the limitations of study, all five acidic beverages demonstrated erosive potential in the simulated in vitro conditions under SEM analysis; however, each group of specimens exhibited a different extent of demineralization. In addition, the overall effect of all beverages was insignificant under EDX analysis as no substantial difference was revealed between the elemental composition of experimental and control group specimens.
Subject(s)
Beverages , Microscopy, Electron, Scanning , Spectrometry, X-Ray Emission , Surface Properties , Humans , Beverages/analysis , Acids/analysis , Tooth Erosion , Tooth/ultrastructure , Tooth/chemistry , Hydrogen-Ion Concentration , Calcium/analysis , Tooth Demineralization , Phosphorus/analysisABSTRACT
Vertebrates use the phosphate mineral apatite in their skeletons, which allowed them to develop tissues such as enamel, characterized by an outstanding combination of hardness and elasticity. It has been hypothesized that the evolution of the earliest vertebrate skeletal tissues, found in the teeth of the extinct group of conodonts, was driven by adaptation to dental function. We test this hypothesis quantitatively and demonstrate that the crystallographic order increased throughout the early evolution of conodont teeth in parallel with morphological adaptation to food processing. With the c-axes of apatite crystals oriented perpendicular to the functional feeding surfaces, the strongest resistance to uniaxial compressional stress is conferred along the long axes of denticles. Our results support increasing control over biomineralization in the first skeletonized vertebrates and allow us to test models of functional morphology and material properties across conodont dental diversity.
Subject(s)
Biological Evolution , Biomineralization , Fossils , Tooth , Biomineralization/physiology , Animals , Tooth/metabolism , Tooth/chemistry , Apatites/metabolism , Apatites/chemistry , Dental Enamel/chemistry , Dental Enamel/metabolism , VertebratesABSTRACT
Within the complex world of disaster victim identification, or DVI, forensic science practitioners use a variety of investigative techniques to work toward a common goal: identification of the decedents, bringing closure to the affected communities. Identification is a complex undertaking; the event (disaster) also can be extraordinarily complex, as it may be an acute event, or one that spans months or years. Compounding this time issue, remains may be heavily fragmented, dispersed, commingled, or otherwise disrupted by either the perpetrators or the disaster itself. To help solve these complexities, we explore the use of stable isotope analysis (SIA) in DVI events. SIA can be used with a variety of body tissues (hair, nail, bone, and teeth), and each represents different time depths in a decedent's life. Bone collagen and tooth enamel carbonate are useful to reconstruct an individual's diet and source water intakes, respectively, leading to likely population or geographic origin determinations. Additionally, the carbon and nitrogen isotopic signatures of bone collagen have calculated intraperson ranges. These facts allow investigators to determine likely origin of remains using isotopic data and can be used to link skeletal elements (to an individual), or perhaps more importantly, show that remains are not linked. Application of SIA can thus speed remains identification by eliminating individuals from short lists for identification, linking or decoupling remains, and reducing the need for some DNA testing. These strategies and hypothesis tests should commence early in the DVI process to achieve maximum effectiveness.
Subject(s)
Bone and Bones , Carbon Isotopes , Disaster Victims , Humans , Bone and Bones/chemistry , Carbon Isotopes/analysis , Hair/chemistry , Nails/chemistry , Nitrogen Isotopes/analysis , Collagen/analysis , Dental Enamel/chemistry , Tooth/chemistry , Forensic Anthropology/methods , Body Remains , Isotopes/analysis , DisastersABSTRACT
OBJECTIVES: This study presents biological affinities between the last hunter-fisher-gatherers and first food-producing societies from the Nile Valley. We investigate odontometric and dental tissue proportion changes between these populations from the Middle Nile Valley and acknowledge the biological processes behind them. MATERIALS AND METHODS: Dental remains of 329 individuals from Nubia and Central Sudan that date from the Late Pleistocene to the mid-Holocene are studied. Using 3D imaging techniques, we investigated outer and inner metric aspects of upper central incisors, and first and second upper molars. RESULTS: Late Paleolithic and Mesolithic foragers display homogeneous crown dimensions, dental tissue proportions, and enamel thickness distribution. This contrasts with Neolithic trends for significant differences from earlier samples on inner and outer aspects. Finally, within the Neolithic sample differences are found between Nubian and Central Sudanese sites. DISCUSSION: Substantial dental variation appears to have occurred around 6000 bce in the Nile Valley, coinciding with the emergence of food-producing societies in the region. Archeological and biological records suggest little differences in dietary habits and dental health during this transition. Furthermore, the substantial variations identified here would have happened in an extremely short time, a few centuries at most. This does not support in situ diet-related adaptation. Rather, we suggest these data are consistent with some level of population discontinuity between the Mesolithic and Neolithic samples considered here. Complex settlement processes could also explain the differences between Nubia and Central Sudan, and with previous results based on nonmetric traits.
Subject(s)
Paleodontology , Humans , History, Ancient , Sudan , Male , Female , Adult , Tooth/anatomy & histology , Tooth/chemistry , Molar/anatomy & histology , Diet/history , Incisor/anatomy & histologyABSTRACT
DNA analysis plays a crucial role in forensic investigations, helping in criminal cases, missing persons inquiries, and archaeological research. This study focuses on the DNA concentration in different skeletal elements to improve human identification efforts. Ten cases of unidentified skeletal remains brought to the Institute of Forensic Medicine in Timisoara, Romania, underwent DNA analysis between 2019 and 2023. The results showed that teeth are the best source for DNA extraction as they contain the highest concentration of genetic material, at 3.68 ng/µL, compared to the petrous temporal bone (0.936 ng/µL) and femur bone (0.633 ng/µL). These findings highlight the significance of teeth in forensic contexts due to their abundant genetic material. Combining anthropological examination with DNA analysis enhances the understanding and precision of identifying human skeletal remains, thus advancing forensic science. Selecting specific skeletal elements, such as the cochlea or teeth, emerges as crucial for reliable genetic analyses, emphasizing the importance of careful consideration in forensic identification procedures. Our study concludes that automated DNA extraction protocols without liquid nitrogen represent a significant advancement in DNA extraction technology, providing a faster, more efficient, and less labor-intensive method for extracting high-quality DNA from damaged bone and tooth samples.
Subject(s)
DNA , Tooth , Humans , Tooth/chemistry , DNA/isolation & purification , DNA/genetics , Bone and Bones/chemistry , Body Remains/chemistry , Forensic Genetics/methods , Male , Romania , FemaleABSTRACT
The intricate organization of goethite nanorods within a silica-rich matrix makes limpet teeth the strongest known natural material. However, the mineralization pathway of goethite in organisms under ambient conditions remains elusive. Here, by investigating the multi-level structure of limpet teeth at different growth stages, it is revealed that the growth of goethite crystals proceeds by the attachment of amorphous nanoparticles, a nonclassical crystallization pathway widely observed during the formation of calcium-based biominerals. Importantly, these nanoparticles contain a high amount of silica, which is gradually expelled during the growth of goethite. Moreover, in mature teeth of limpet, the content of silica correlates with the size of goethite crystals, where smaller goethite crystals are densely packed in the leading part with higher content of silica. Correspondingly, the leading part exhibits higher hardness and elastic modulus. Thus, this study not only reveals the nonclassical crystallization pathway of goethite nanorods in limpet teeth, but also highlights the critical roles of silica in controlling the hierarchical structure and the mechanical properties of limpet teeth, thus providing inspirations for fabricating biomimetic materials with excellent properties.
Subject(s)
Crystallization , Iron Compounds , Minerals , Nanoparticles , Nanotubes , Silicon Dioxide , Silicon Dioxide/chemistry , Minerals/chemistry , Nanotubes/chemistry , Iron Compounds/chemistry , Nanoparticles/chemistry , Animals , Tooth/chemistry , Gastropoda/chemistry , Particle SizeABSTRACT
This paper aims to re-examine the dietary practices of individuals buried at Sigatoka Sand Dunes site (Fiji) in Burial Ground 1 excavated by Simon Best in 1987 and 1988 using two approaches and a reassessment of their archaeological, bioarchaeological and chronological frame. First, stable carbon and nitrogen isotope analysis was applied to document dietary changes between childhood and adulthood using an intra-individual approach on paired bone-tooth. Second, the potential adaptation of the individuals to their environment was evaluated through regional and temporal comparisons using inter-individual bone analysis. Ten AMS radiocarbon dates were measured directly on human bone collagen samples, placing the series in a range of approximately 600 years covering the middle of the first millennium CE (1,888 to 1,272 cal BP). δ13C and δ15N ratios were measured on bone and tooth collagen samples from 38 adult individuals. The results show that δ15N values from tooth are higher than those s from bone while bone and tooth δ13C values are similar, except for females. Fifteen individuals were included in an intra-individual analysis based on paired bone and tooth samples, which revealed six dietary patterns distinguished by a differential dietary intake of marine resources and resources at different trophic levels. These highlight sex-specific differences not related to mortuary practices but to daily life activities, supporting the hypothesis of a sexual division of labour. Compared to other Southwest Pacific series, Sigatoka diets show a specific trend towards marine food consumption that supports the hypothesis of a relative food self-sufficiency requiring no interactions with other groups.
Subject(s)
Bone and Bones , Burial , Carbon Isotopes , Nitrogen Isotopes , Humans , Carbon Isotopes/analysis , Female , Nitrogen Isotopes/analysis , Male , Burial/history , Bone and Bones/chemistry , Adult , Fiji , Archaeology , Diet/history , Collagen , History, Ancient , Tooth/chemistry , Child , Radiometric Dating/methodsABSTRACT
Vertebrate mineralized tissues, present in bones, teeth and scales, have complex 3D hierarchical structures. As more of these tissues are characterized in 3D using mainly FIB SEM at a resolution that reveals the mineralized collagen fibrils and their organization into collagen fibril bundles, highly complex and diverse structures are being revealed. In this perspective we propose an approach to analyzing these tissues based on the presence of modular structures: material textures, pore shapes and sizes, as well as extents of mineralization. This modular approach is complimentary to the widely used hierarchical approach for describing these mineralized tissues. We present a series of case studies that show how some of the same structural modules can be found in different mineralized tissues, including in bone, dentin and scales. The organizations in 3D of the various structural modules in different tissues may differ. This approach facilitates the framing of basic questions such as: are the spatial relations between modular structures the same or similar in different mineralized tissues? Do tissues with similar sets of modules carry out similar functions or can similar functions be carried out using a different set of modular structures? Do mineralized tissues with similar sets of modules have a common developmental or evolutionary pathway? STATEMENT OF SIGNIFICANCE: 3D organization studies of diverse vertebrate mineralized tissues are revealing detailed, but often confusing details about the material textures, the arrangements of pores and differences in the extent of mineralization within a tissue. The widely used hierarchical scheme for describing such organizations does not adequately provide a basis for comparing these tissues, or addressing issues such as structural components thought to be characteristic of bone, being present in dermal tissues and so on. The classification scheme we present is based on identifying structural components within a tissue that can then be systematically compared to other vertebrate mineralized tissues. We anticipate that this classification approach will provide insights into structure-function relations, as well as the evolution of these tissues.
Subject(s)
Calcification, Physiologic , Vertebrates , Animals , Bone and Bones , Tooth/chemistry , Humans , Dentin/chemistry , Animal Scales/chemistryABSTRACT
The utility of two novel laser-based methods, laser ablation electrospray ionization (LAESI) and laser desorption ionization (LDI) from silicon nanopost array (NAPA), is explored via local analysis and mass spectrometry imaging (MSI) of hard tissues (tooth and hair) for the detection and mapping of organic components. Complex mass spectra are recorded in local analysis mode from tooth dentin and scalp hair samples. Nicotine and its metabolites (cotinine, hydroxycotinine, norcotinine, and nicotine) are detected by LAESI-MS in the teeth of rats exposed to tobacco smoke. The intensities of the detected metabolite peaks are proportional to the degree of exposure. Incorporating ion mobility separation in the LAESI-MS analysis of scalp hair enables the detection of cotinine in smoker hair along with other common molecular species, including endogenous steroid hormones and some lipids. Single hair strands are imaged by MALDI-MSI and NAPA-LDI-MSI to explore longitudinal variations in the level of small molecules. Comparing spectra integrated from NAPA-LDI-MSI and MALDI-MSI images reveals that the two techniques provide complementary information. There were 105 and 82 sample-related peaks for MALDI and NAPA, respectively, with an overlap of only 16 peaks, indicating a high degree of complementarity. Enhanced molecular coverage and spatial resolution offered by LAESI-MS and NAPA-LDI-MSI can reveal the distributions of known and potential biomarkers in hard tissues, facilitating exposome research.
Subject(s)
Hair , Lasers , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization , Xenobiotics , Animals , Hair/chemistry , Rats , Xenobiotics/analysis , Xenobiotics/metabolism , Spectrometry, Mass, Electrospray Ionization , Tooth/chemistry , Tooth/metabolism , Nicotine/analysis , Nicotine/metabolism , MaleABSTRACT
Identification of human remains using genetic methods is an important task of forensic science. DNA markers are proving essential in the identification of unknown human remains. However, environmental factors can lead to poor preservation of DNA, including in bone material. The aim of this study was therefore to compare two methods of DNA isolation from bone material: the traditional organic method and the new protocol using the EZ2 Connect instrument. The study involved three types of bone material, namely molars/premolars, petrous parts of the temporal bone and femurs, all with an estimated PMI of 70-80 years. Importantly, the biological material was obtained from three different environments, categorized as preserving, neutral and degrading, based on basic physico-chemical tests and the potential impact on the bone. The results obtained show that the DNA was best preserved in the petrous bone, followed by the teeth, and the femur. DNA extraction using the EZ2 Connect instrument with a new protocol gave slightly better results for the petrous bone, comparable results for the teeth and worse results for the femur compared to the organic method. Several protocol modifications were tested and optimal conditions for DNA isolation were proposed for the EZ2 protocol. Furthermore, the use of an automated method facilitated the effective accumulation of isolates and increased the chances of successful identification of unknown human remains.
Subject(s)
DNA , Humans , DNA/isolation & purification , DNA/genetics , DNA Fingerprinting , Femur/chemistry , Polymerase Chain Reaction , Microsatellite Repeats , Petrous Bone , Bone and Bones/chemistry , Temporal Bone , Tooth/chemistryABSTRACT
Teeth exemplify architectures comprising an interplay of inorganic and organic constituents, resulting in sophisticated natural composites. Rodents (Rodentia) showcase extraordinary adaptations, with their continuously growing incisors surpassing human teeth in functional and structural optimizations. In this study, employing state-of-the-art direct atomic-scale imaging and nanoscale spectroscopies, we present compelling evidence that the release of material from ameloblasts and the subsequent formation of iron-rich enamel and surface layers in the constantly growing incisors of rodents are complex orchestrated processes, intricately regulated and independent of environmental factors. The synergistic fusion of three-dimensional tomography and imaging techniques of etched rodentÌs enamel unveils a direct correlation between the presence of pockets infused with ferrihydrite-like material and the acid resistant properties exhibited by the iron-rich enamel, fortifying it as an efficient protective shield. Moreover, observations using optical microscopy shed light on the role of iron-rich enamel as a microstructural element that acts as a path for color transmission, although the native color remains indistinguishable from that of regular enamel, challenging the prevailing paradigms. The redefinition of "pigmented enamel" to encompass ferrihydrite-like infusion in rodent incisors reshapes our perception of incisor microstructure and color generation. The functional significance of acid-resistant iron-rich enamel and the understanding of the underlying coloration mechanism in rodent incisors have far-reaching implications for human health, development of potentially groundbreaking dental materials, and restorative dentistry. These findings enable the creation of an entirely different class of dental biomaterials with enhanced properties, inspired by the ingenious designs found in nature.
Subject(s)
Dental Enamel , Animals , Dental Enamel/chemistry , Dental Enamel/metabolism , Dental Enamel/drug effects , Ferric Compounds/chemistry , Ferric Compounds/pharmacology , Rats , Color , Mice , Incisor/chemistry , Incisor/metabolism , Tooth/chemistry , Tooth/metabolismABSTRACT
Teeth are considered unique as fingerprints for identification purposes. Their structure and resilience mean they can remain for thousands and millions of years withstanding extreme conditions, including burning. During burning, bones undergo carbonization at approximately 400°C and calcination at approximately 700°C. This study aimed to investigate the effects of carbonization and calcination on dental tissue. It involved nondestructive analyses of 58 extracted human teeth before and after burning, using x-ray diffraction, micro-CT, and high-resolution confocal microscopy. The results revealed that during carbonization, dentin volume decreased in two thirds of the sample, accompanied by crack formation and significant reduction in hydroxyapatite crystal size (p<0.001). During calcination, dentin volume decreased in all teeth, along with a significant deepening of the cracks (p<0.001), while enamel crystal size increased slightly. Initial changes in teeth occurred at lower temperatures than had once been assumed, as indicated by the cracks during carbonization, and there was up to a 36% decrease in dentin volume during calcination, which should be considered when measuring burnt teeth. The results of this research provide new insight into understanding dental tissue response to burning. Thus, dental remains may contribute to the knowledge needed to reconstruct anthropological and forensic scenarios involving burning.