Theobromine for Remineralization of White Spot Lesions on Dental Enamel: A Systematic Review and Meta-analysis.

AIM: This systematic review and meta-analysis evaluated theobromine's (Theobroma cacao) potential in remineralizing white spot lesions in dental enamel. Methods: This study is reported according to the PRISMA checklist and was registered in PROSPERO (CRD42023414371). In vitro tests that evaluated the remineralizing potential of theobromine compared to fluoride ion after demineralization for the formation of white spot lesions on enamel were selected, with no limitation on the year of publication. Electronic searches were performed in PubMed/MEDLINE, Scopus, and Web of Science by two independent researchers. Thirty articles were received of which six were selected according to the inclusion criteria. RESULTS: The selected studies evaluated the Enamel Surface Microhardness (SMH), Vickers or Knoop, before and after treatment with theobromine and fluoride solutions. For the SMH Vickers, there were no differences between groups at baseline (p=1.00; mean difference: -0.00; CI: -11.36 to 11.36) and after treatment (p=0.51; mean difference: 4.12; CI: -8.16 to 16.41). The results of SMH Knoop showed differences between groups at baseline, favoring the experimental group (p=0.002; mean difference: 9.84; CI: 3.65 to 16.02) and after treatment favoring the control group (p=0.00001; mean difference: -5.45; CI: -7.62 to -3.27). CONCLUSION: The use of theobromine increases the microhardness of dental enamel subjected to a demineralization process, thus being effective in the remineralization of this tissue with success equivalent to that obtained with the use of fluoride.

The damage and remineralization strategies of dental hard tissues following radiotherapy.

OBJECTIVES: This study pursued two main purposes. The first aim was to expound on the microscopic factors of radiation-related caries (RRC). Further, it aimed to compare the remineralization effect of different remineralizing agents on demineralized teeth after radiotherapy. METHODS: The enamel and dentin samples of bovine teeth were irradiated with different doses of radiation. After analysis of scanning electron microscope (SEM), X-Ray diffraction (XRD), and energy dispersive spectrometer (EDS), the samples irradiated with 50 Gy radiation were selected and divided into the demineralization group, the double distilled water (DDW) group, the Sodium fluoride (NaF) group, the Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) group, the NaF + CPP-ACP group, and the Titanium tetrafluoride (TiF4) group. After demineralization, remineralizing agents treatment, and remineralization, the samples were evaluated using SEM, atomic force microscope (AFM), EDS, and transverse microradiography (TMR). RESULTS: A radiation dose of 30 Gy was sufficient to cause damage to the dentinal tubules, but 70 Gy radiation had little effect on the microstructure of enamel. Additionally, the NaF + CPP-ACP group and the TiF4 group significantly promoted deposit formation, decreased surface roughness, and reduced mineral loss and lesion depth of demineralized enamel and dentin samples after radiation. CONCLUSIONS: Radiation causes more significant damage to dentin compared to enamel. NaF + CPP-ACP and TiF4 had a promising ability to promote remineralization of irradiated dental hard tissues. ADVANCES IN KNOWLEDGE: This in vitro study contributes to determining a safer radiation dose range for teeth and identifying the most effective remineralization approach for RRC.

Evaluation of the remineralization potential of self-assembling peptide P11-4 with fluoride compared to fluoride varnish in the management of incipient carious lesions: a randomized controlled clinical trial.

OBJECTIVES: The present trial's aim was to compare the remineralization potential of self-assembling peptide P11-4 combined with fluoride to that of fluoride varnish. MATERIALS AND METHODS: Twenty-eight participants with 58 incipient carious lesions were enrolled in the present trial. Participants were randomly divided into two groups with 14 participants and 29 incipient lesions in each group. Patients were assigned either to self-assembling peptide combined with fluoride (Curodont Repair Fluoride Plus™) or sodium fluoride varnish (NaF, Bifluorid 10) groups. Both agents were applied according to the manufacturer's instructions on non-cavitated incipient carious lesions. Lesions were assessed by two calibrated and blinded assessors at baseline, and after one-, three- and six-months using a laser fluorescence device (DIAGNOdent). RESULTS: Although laser fluorescence scores significantly improved in both groups over time (p < 0.05), no notable differences were evident between both groups at one-month (p > 0.05). Yet, at three- and six-months statistically lower laser fluorescence readings were evident in the self-assembling peptide combined with fluoride group in comparison to the fluoride alone group (p < 0.05). There was 60% less risk for caries progression for Curodont Repair Fluoride Plus™ when compared to NaF varnish after six months. Self-assembling peptide combined with fluoride was able to change 65.5% of non-cavitated carious lesions from DIAGNOdent score 3 (11-20) to score 1 (0-4). Fluoride varnish was able to change 13.8% of the lesions from score 3 to score 1 after six months. CONCLUSIONS: The self-assembling peptide combined with fluoride varnish showed higher remineralization potential than fluoride varnish alone for incipient carious lesions over a six-months follow up. CLINICAL RELEVANCE: The combination of self-assembling peptide P11-4 and fluoride could offer a new tool in managing incipient carious lesions.

Comparison of biofilm models for producing artificial active white spot lesions.

OBJECTIVE: This study compared three protocols for developing artificial white spot lesions (WSL) using biofilm models. METHODOLOGY: In total, 45 human enamel specimens were sterilized and allocated into three groups based on the biofilm model: Streptococcus sobrinus and Lactobacillus casei (Ss+Lc), Streptococcus sobrinus (Ss), or Streptococcus mutans (Sm). Specimens were incubated in filter-sterilized human saliva to form the acquired pellicle and then subjected to the biofilm challenge consisting of three days of incubation with bacteria (for demineralization) and one day of remineralization, which was performed once for Ss+Lc (four days total), four times for Ss (16 days total), and three times for Sm (12 days total). After WSL creation, the lesion fluorescence, depth, and chemical composition were assessed using Quantitative Light-induced Fluorescence (QLF), Polarized Light Microscopy (PLM), and Raman Spectroscopy, respectively. Statistical analysis consisted of two-way ANOVA followed by Tukey's post hoc test (α=0.05). WSL created using the Ss+Lc protocol presented statistically significant higher fluorescence loss (ΔF) and integrated fluorescence (ΔQ) in comparison to the other two protocols (p<0.001). RESULTS: In addition, Ss+Lc resulted in significantly deeper WSL (137.5 µm), followed by Ss (84.1 µm) and Sm (54.9 µm) (p<0.001). While high mineral content was observed in sound enamel surrounding the WSL, lesions created with the Ss+Lc protocol showed the highest demineralization level and changes in the mineral content among the three protocols. CONCLUSION: The biofilm model using S. sobrinus and L. casei for four days was the most appropriate and simplified protocol for developing artificial active WSL with lower fluorescence, higher demineralization, and greater depth.

Comparison of remineralization ability of tricalcium silicate and of glass ionomer cement on residual dentin: an in vitro study.

OBJECTIVE: This study aimed to compare the remineralization effects of a calcium silicate-based cement (Biodentine) and of a glass ionomer cement (GIC: Fuji IX) on artificially demineralized dentin. METHODS: Four standard cavities were prepared in dentin discs prepared from 34 extracted sound human third molars. In each disc, one cavity was covered with an acid-resistant varnish before demineralization (Group 1). The specimens were soaked in a chemical demineralization solution for 96 h to induce artificial carious lesions. Thereafter, one cavity each was filled with Biodentine (Group 2) and GIC (Group 3), respectively, and one carious lesion was left unrestored as a negative control (Group 4). Next, specimens were immersed in simulated body fluid (SBF) for 21 days. After cross-sectioning the specimens, the Ca/P ratio was calculated in each specimen by using scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX). Finally, data were analyzed using repeated-measures ANOVA with post-hoc Bonferroni correction. RESULTS: Both cement types induced dentin remineralization as compared to Group 4. The Ca/P ratio was significantly higher in Group 2 than in Group 3 (p < 0.05). CONCLUSION: The dentin lesion remineralization capability of Biodentine is higher than that of GIC, suggesting the usefulness of the former as a bioactive dentin replacement material. CLINICAL RELEVANCE: Biodentine has a higher remineralization ability than that of GIC for carious dentin, and its interfacial properties make it a promising bioactive dentin restorative material.

The Synergistic Effect of High Intensity Focused Ultrasound on In-vitro Remineralization of Tooth Enamel by Calcium Phosphate Ion Clusters.

Background: Remineralization of dental enamel is an important intervention strategy for the treatment of demineralized lesions. Existing approaches have limitations such as failure to adequately reproduce both the ideal structural and mechanical properties of the native tooth. The ability of ultrasound to control and accelerate the crystallization processes has been widely reported. Therefore, a new approach was explored for in-vitro enamel remineralization involving the synergistic effect of high-intensity focused ultrasound (HIFU) coupled with calcium phosphate ion clusters (CPICs). Methods: The demineralized enamel was treated with CPICs, with or without subsequent HIFU exposure for different periods (2.5, 5, and 10 min). The specimens were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and Raman spectroscopy. The surface hardness and crystallographic properties of the treated specimens were evaluated using Vickers microhardness testing and X-ray diffraction (XRD), respectively. Results: SEM revealed distinct, organized, and well-defined prismatic structures, showing clear evidence of remineralization in the combined CPIC/HIFU treatment groups. AFM further revealed a decrease in the surface roughness values with increasing HIFU exposure time up to 5 min, reflecting the obliteration of interprismatic spaces created during demineralization. The characteristic Raman band at 960 cm-1 associated with the inorganic phase of enamel dominated well in the HIFU-treated specimens. Importantly, microhardness testing further demonstrated that new mineral growth also recovered the mechanical properties of the enamel in the HIFU-exposed groups. Critical to our aspirations for developing this into a clinical process, these results were achieved in only 5 min. Conclusion: HIFU exposure can synergise and significantly accelerate in-vitro enamel remineralization process via calcium phosphate ion clusters. Therefore, this synergistic approach has the potential for use in future clinical interventions.

Advancing dentin remineralization: Exploring amorphous calcium phosphate and its stabilizers in biomimetic approaches.

OBJECTIVE: This review elucidates the mechanisms underpinning intrafibrillar mineralization, examines various amorphous calcium phosphate (ACP) stabilizers employed in dentin's intrafibrillar mineralization, and addresses the challenges encountered in clinical applications of ACP-based bioactive materials. METHODS: The literature search for this review was conducted using three electronic databases: PubMed, Web of Science, and Google Scholar, with specific keywords. Articles were selected based on inclusion and exclusion criteria, allowing for a detailed examination and summary of current research on dentin remineralization facilitated by ACP under the influence of various types of stabilizers. RESULTS: This review underscores the latest advancements in the role of ACP in promoting dentin remineralization, particularly intrafibrillar mineralization, under the regulation of various stabilizers. These stabilizers predominantly comprise non-collagenous proteins, their analogs, and polymers. Despite the diversity of stabilizers, the mechanisms they employ to enhance intrafibrillar remineralization are found to be interrelated, indicating multiple driving forces behind this process. However, challenges remain in effectively designing clinically viable products using stabilized ACP and maximizing intrafibrillar mineralization with limited materials in practical applications. SIGNIFICANCE: The role of ACP in remineralization has gained significant attention in dental research, with substantial progress made in the study of dentin biomimetic mineralization. Given ACP's instability without additives, the presence of ACP stabilizers is crucial for achieving in vitro intrafibrillar mineralization. However, there is a lack of comprehensive and exhaustive reviews on ACP bioactive materials under the regulation of stabilizers. A detailed summary of these stabilizers is also instrumental in better understanding the complex process of intrafibrillar mineralization. Compared to traditional remineralization methods, bioactive materials capable of regulating ACP stability and controlling release demonstrate immense potential in enhancing clinical treatment standards.

The effect of silver diammine fluoride on In Vitro Enamel caries lesion remineralization and staining as a function of lesion baseline mineral distribution.

OBJECTIVES: to investigate whether baseline mineral distribution modulates the ability of silver diammine fluoride (SDF) to remineralize and stain enamel caries lesions. METHODS: This laboratory study followed a 3 [treatment: SDF/fluoride varnish (FV)/deionized water (DIW)] ×3 [lesion protocol: methylcellulose (MeC)/hydroxyethylcellulose (HEC)/Carbopol 907 (C907)] factorial design. Lesions were created in bovine enamel specimens (n = 20). Treatments were applied and lesions remineralized in artificial saliva. Digital transverse microradiography (TMR-D) was used to analyze lesions. Lesion color was monitored spectrophotometrically. The effects of lesion protocol and treatment on changes in lesion depth (ΔLD), mineral loss (ΔΔZ), maximum mineral density at the surface zone (ΔSZmax), and color changes related to remineralization (ΔL*remin) were analyzed using two-way ANOVA. RESULTS: The treatment×lesion protocol interaction was significant for ΔΔZ (p < 0.01) and ΔL*remin (p < 0.01), however not for ΔLD (p = 0.23) or ΔSZmax (p = 0.91). There were no differences in ΔΔZ between treatments in HEC and C907 lesions. However, DIW resulted in more remineralization than both SDF (p < 0.01) and FV (p = 0.01) in MeC lesions. Considering changes from lesion baseline after remineralization in MeC lesions, SDF treatment resulted in the highest mineral gain in the surface zone. However, DIW revealed the highest mineral gain after remineralization in the lesion body. SDF stained lesions with the intensity increasing after remineralization in C907 lesions, whereas staining decreased in MeC and HEC lesions. CONCLUSION: High fluoride treatments can interfere with continuous remineralization of caries lesions due to partial arrest. Baseline lesion mineral distribution affects SDF's ability to enhance remineralization and the staining caused by SDF. CLINICAL SIGNIFICANCE: SDF is being used to arrest active caries lesions extending into dentin and to treat dentin hypersensitivity. This study shed light on SDF's effect on an isolated process in dental caries only, remineralization. It achieved this by examining enamel caries lesions with differing mineral distributions and assessing their staining properties.

Investigation of mechanical properties, remineralization, antibacterial effect, and cellular toxicity of composite orthodontic adhesive combined with silver-containing nanostructured bioactive glass.

BACKGROUND: The formation of white spots, which represent early carious lesions, is a major issue with fixed orthodontics. The addition of remineralizing agents to orthodontic adhesives may prevent the formation of white spots. The aim of this study was to produce a composite orthodontic adhesive combined with nano-bioactive glass-silver (nBG@Ag) for bracket bonding to enamel and to investigate its cytotoxicity, antimicrobial activity, remineralization capability, and bond strength. METHODS: nBG@Ag was synthesized using the sol-gel method, and characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy with an attenuated total reflectance attachment (ATR-FTIR). The cytotoxicity test (MTT) and antimicrobial activity of adhesives containing 1%, 3%, and 5% (wt/wt) nBG@Ag were evaluated, and the shear bond strength of the adhesives was measured using a universal testing machine. Remineralization was assessed through microhardness testing with a Vickers microhardness tester and scanning electron microscopy (SEM). Statistical analyses were conducted using the Shapiro-Wilk test, Levene test, one-way ANOVA, Robust-Welch test, Tukey HSD method, and two-way ANOVA. RESULTS: The biocompatibility of the adhesives was found to be high, as confirmed by the lack of significant differences in the cytotoxicity between the sample and control groups. Discs made from composites containing nBG@Ag exhibited a significant reduction in the growth of Streptococcus mutans (p < 0.05), and the antibacterial activity increased with higher percentages of nBG@Ag. The shear bond strength of the adhesives decreased significantly (p < 0.001) after the addition of nanoparticles, but it remained above the recommended value. The addition of nBG@Ag showed improvement in the microhardness of the teeth, although the differences in microhardness between the study groups were not statistically significant. The formation of hydroxyapatite deposits on the tooth surface was confirmed through SEM and energy-dispersive X-ray spectroscopy (EDX). CONCLUSION: Adding nBG@Ag to orthodontic adhesives can be an effective approach to enhance antimicrobial activity and reduce enamel demineralization around the orthodontic brackets, without compromising biocompatibility and bond strength.

Evaluation of Remineralizing Capacity of Tricalcium Phosphate, Nano-Hydroxyapatite and Ozone Remineralizing Agents on the Artificial Carious Lesion.

BACKGROUND: Dental caries is a dynamic process. By using therapeutic agents, early, noncavitated lesions and caries limited to the enamel can be stopped or even remineralized. For the remineralization of the initial carious lesion, many nonfluoridated remineralizing agents were investigated. OBJECTIVES: An observational study to assess the remineralizing efficacy of tricalcium phosphate (TCP), nano-hydroxyapatite (nHAp) and ozone remineralizing agents on the artificial carious lesion. METHODOLOGY: In this observational research, the artificial carious lesion was produced on extracted 40 premolar teeth. Later, remineralizing agents (Group A: nHAp, Group B: TCP, Group C: Ozone remineralizing agents, Group D: Control group (Deionized water) were used to remineralize demineralized teeth. Utilizing the Vickers Hardness Number, the level of demineralization and remineralization was assessed. Later these readings were statistically assessed using the Tukey's HSD (honestly significant difference) and ANOVA tests in SPSS version 21.0. The P value was set at 0.05 or less. RESULTS: After demineralization, there was a decrease in enamel microhardness values, with 32% in Group A, 26% in Group B, 22% in Group C, and 21% in Group D, respectively. From the baseline to demineralization, there was a statistically significant decrease in microhardness across all groups. After remineralization, Groups A, B, and C experienced an increase in microhardness while Group D experienced no changes. This showed that Group A had the highest remineralization percentage, followed by Group B and Group C. CONCLUSION: nHAp and TCP had the greater remineralizing ability, which can be used to manage initial carious lesions.

Effect of treatment with phosphate, casein phosphopeptide and fluoride on the remineralization: in vitro study.

This study aimed to evaluate in vitro the effect protocols and anticaries agents containing casein amorphous calcium fluoride phosphopeptide-phosphate (CPP-ACPF, MI Paste Plus), sodium trimetaphosphate (TMP) and fluoride (F), in remineralization of caries lesions. Bovine enamel blocks with initial caries lesions were divided into groups (n = 12): 1) Toothpaste without F-TMP-MI Plus (Placebo); 2) Toothpaste 1100 ppm F (1100F), 3) 1100F + MI Paste Plus (1100F-MI Paste Plus), 4) Toothpaste with 1100F + Neutral gel with 4,500 ppm F + 5%TMP (1100F + Gel TMP) and 5) Toothpaste with 1100F + Neutral gel with 9,000 ppm F (1100F + Gel F). For the 4 and 5 groups the gel was applied only once for 1 minute, initially to the study. For the 3 group, after treatment with 1100F, MI Paste Plus was applied 2x/day for 3 minute. After pH cycling, the percentage of surface hardness recovery (%SHR); integrated loss of subsurface hardness (ΔKHN); profile and depth of the subsuperficial lesion (PLM); concentrations of F, calcium (Ca) and phosphorus (P) in enamel was determined. The data were analyzed by ANOVA (1-criterion) and Student-Newman-Keuls test (p < 0.001). Treatment with 1100F alone led to ~ 28% higher remineralization when compared to treatment with 1100F associated with MI Paste Plus (p < 0.001). The 1100F and 1100F + Gel F groups showed similar values for %SHR (p = 0.150). 1100F + Gel TMP treatment also remineralized the enamel surface by ~ 30% and 20% when compared to the 1100F + Gel F and 1100F groups (p < 0.001). The lower lesion depth (ΔKHN) was observed for the 1100F + Gel TMP group (p < 0.001), where it was 54% and 44% lower in comparison to the 1100F and 1100F + Gel F groups (p < 0.001). Polarized light microscopy photomicrographs showed subsurface lesions in all groups, but these lesions were present to a lower extent in the 1100F + Gel TMP group (p < 0.001). Treatment with 1100F + Gel TMP promoted an increase in the concentration of Ca in the enamel by ~ 57% and ~ 26% when compared to the 1100F and 1100F + MI Paste Plus groups (p < 0.001), respectively. There were no significant differences between the 1100F, 1100F + MI Paste Plus and 1100F + Gel F groups (p > 0.001). Similar values of P in the enamel were observed in the 1100F, 1100F + MI Paste Plus and 1100F + Gel F groups (p > 0.001), except for the 1100F + Gel TMP group, which presented a high concentration (p < 0.001). We conclude that the 1100F+TMP gel treatment/protocol led to a significant increased remineralization when compared to the other treatments/protocols and may be a promising strategy for patients with early caries lesions.

Synthesis of novel silver-loaded clay AgF@Hec for the prevention of dental cariesin vitro.

Dental caries, a chronic infectious disease characterized by tooth mineral loss caused by plaque, is one of the major global public health problems. Silver diamine fluoride (SDF) has been proven to be a highly effective anti-caries drug due to its high bacterial inhibition and remineralization ability. However, the SDF solution is unstable, which immensely limits its clinical application. Therefore, new silver-load clay named AgF@Hec was designed by replacing the NH3with hectorite in this study. Fourier transform infrared spectroscopy and x-ray diffraction spectroscopy were employed to confirm the structure of AgF@Hec. Dynamic light scattering analysis was used to reveal the effect of different hectorite concentrations on the stability of AgF@Hec. Moreover, AgF@Hec exhibits significant remineralization and hardness recovery of the initial carious lesions. Bacteriostatic experiments also proved that it has a significant inhibitory effect onA. Viscosus, S. mutans, S. sanguinis, S. salivarius, Lactobacillus sp.and both gram-positive and gram-negative bacteria. We therefore believed that AgF@Hec should be a promising biomaterial that can be applied in the prevention of dental caries.

Stain removal, abrasion and anticaries properties of a novel low abrasion dentifrice containing micro-fibrillated cellulose: in vitro assessments.

OBJECTIVES: This laboratory study assessed the performance of a novel fluoride dentifrice containing micro-fibrillated cellulose (MFC) and entrapped silica. METHODS: Removal of extrinsic stains was assessed using the pellicle cleaning ratio (PCR) method, and radioactive dentin abrasivity (RDA) was measured, to calculate a cleaning efficiency index (CEI). Fluoride efficacy was evaluated using widely used remineralization and fluoride uptake methods. The test product (Protegera™) was compared to common dentifrices (Crest - Cavity Protection™ and ProHealth™, Sensodyne Pronamel™, Arm & Hammer™ Advanced Whitening, Crest ProHealth™, and Colgate Optic White™). RESULTS: The PCR for the MFC dentifrice (141) was comparable to three known marketed stain-removing dentifrices (Arm & Hammer™ Advanced Whitening, Crest ProHealth™, and Colgate Optic White™) but it had a significantly lower RDA (88 ± 6) than 5 other products. This gave it the highest CEI of the tested products (2.0). In a 10-day pH cycling study, the fluoride efficacy of the MFC product was comparable to Sensodyne Pronamel and Crest Cavity Protection. The MFC dentifrice was superior for promoting fluoride uptake into incipient enamel lesions compared to the USP reference dentifrice. CONCLUSION: The MFC dentifrice has low abrasion, but despite this, it is highly effective in removing stained pellicle. It also is an efficacious fluoride source when compared to relevant commercially available fluoride dentifrices with high dentin abrasivity. CLINICAL SIGNIFICANCE: The addition of micro-fibrillated cellulose to a fluoride dentifrice gives a low abrasive product that can effectively remove external stains, and serve as an effective fluoride source. This combination of benefits seems well suited to enamel protection and caries prevention.

Enhancement of mineral density and mechanical properties in root caries treated with silver diammine fluoride and glass ionomer cement, with emphasis on silver ion distribution.

OBJECTIVES: This study aimed to measure the distribution of silver ion (Ag+), mineral recovery, and nanohardness in carious lesions and comprehensively evaluate the degree of dentin restoration. METHODS: Sixty human teeth with root caries were randomly assigned to the control, silver diammine fluoride (SDF) [Safo], and SDF+Glass ionomer cement (GIC) treatment [Safo+Fuji] groups. Micro-computed tomography (micro-CT) was performed at five time points for each sample before/after treatment to evaluate mineral density within and around carious lesions. Three months following treatment, 12 samples were selected for synchrotron radiation X-ray fluorescence analysis to evaluate Ag+ distribution, while 15 samples were selected for nanoindentation. Data were analyzed using Dunnett's T3 test for micro-CT and Wilcoxon rank sum test with Bonferroni correction (p = 0.017) for nanoindentation. The correlation between hardness and mineral change was analyzed using the Spearman rank correlation coefficient. RESULTS: The Safo and Safo+Fuji groups showed significantly higher mineral recovery rates than did the control group (p < 0.001). In the Safo group, Ag+ accumulated in the deeper layers rather than the superficial layer of caries. In the Safo+Fuji group, Ag+ was found evenly distributed throughout caries, with only a few Ag+ detected in the GIC layer. Hardness in the Safo+Fuji group was significantly higher compared with the Safo group at depths in the range of 10-50 µm. CONCLUSION: In the presence of GICs, SDF exhibited high remineralization capacity when diffusing throughout carious lesions over time. Combined treatment with SDF and GIC could strengthen root dentin even in the presence of caries. CLINICAL SIGNIFICANCE: We found that combination treatment with SDF and GIC could increase mineral density in caries and improve the hardness of the tooth structure compared with fluoride-based agents alone. These findings might pave the way for future clinical trials to determine the therapeutic potential of nanotechnology-based restorative materials.

Promotion of Dentin Biomimetic Mineralization and Bonding Efficacy by Interfacial Control of an Experimental Citric Acid Dental Etching Agent.

Resin-bonded restorations are the most important caries treatment method in clinical practice. Thus, improving the durability of dentin bonding remains a pressing issue. As a promising solution, guided tissue remineralization can induce the formation of apatite nanocrystals to repair defects in the dentin bonding interface. In this study, we present an experimental 20 wt % citric acid (CA) dental etching agent that removes the smear layer. After CA-etching, approximately 3.55 wt % residual CA formed a strong bond with collagen fibrils, reducing the interfacial energy between the remineralizing solution and dentin. CA helped achieve almost complete intrafibrillar and extrafibrillar mineralization after 24 h of mineralization. CA also significantly promoted poly(amidoamine)-induced dentin biomimetic mineralization. The elastic modulus and microhardness of remineralized dentin were restored to that of sound dentin. The remineralized interface reduced microleakage and provided a stronger, longer-lasting bond than conventional phosphate acid-etching. The newly developed CA dental etching agents promoted rapid dentin biomimetic mineralization and improved bonding efficacy through interfacial control, representing a new approach with clinical practice implications.

Remineralizing pretreatment using casein phosphopeptide-amorphous calcium phosphate fluoride, self-assembling peptide, and nanohydroxyapatite gel activation via invisible infrared light on the dentin microhardness and micro shear bond strength to the composite restoration.

AIM: Different remineralizing pretreatments Casein phosphopeptide-amorphous calcium phosphate fluoride (CPP-ACPF), tricalcium phosphate fluoride (TCP-F), self-assembling peptide (SAP) P11-4 and 10 % Nanohydroxyapatite (nHA) gel activation via invisible infrared light on the dentin microhardness (MH) and micro shear bond strength (µSBS) of composite restoration. METHODS: Seventy-five human molar teeth were collected and the dentinal surface of all the samples was exposed to different demineralizing solutions. (n = 15) Group 1 (demineralized dentin), Group 2 (CPP ACP), Group 3 (TCP-F), Group 4 (SAP P11-4), Group 5 (nHA gel activation via invisible infrared light). MH assessment was performed using Vickers hardness. Each group of 10 samples was subjected to composite restoration buildup and µSBS were tested. The debonded samples were then observed under a stereo-microscope for failure analysis. ANOVA was conducted, along with Tukey's post hoc analysis, to examine the µSBS of composite and MH of the remineralized surface. RESULTS: nHA gel activation via invisible infrared light pretreated specimens showed the maximum outcomes of surface hardness (331.2 ± 77.3) and bond strength (10.38 ± 2.77). However, Group 4 (SAP P11-4) (148.3 ± 29.2) remineralized dentin displayed minimum scores of MH and µSBS (5.88 ± 1.01). CONCLUSION: Remineralizing pretreatment nHA gel activation via invisible infrared light and casein phosphopeptide-amorphous calcium phosphate fluoride seem to improve the dentin MH and µSBS of the composite restoration.

Microhardness and elemental analysis of ion-releasing restoration/ dentin interface following enzymatic chemomechanical caries excavation.

BACKGROUND: This study was conducted to compare chemical, elemental and surface properties of sound and carious dentin after application of two restorative materials resin-modified glassionomer claimed to be bioactive and glass hybrid restorative material after enzymatic chemomechanical caries removal (CMCR) agent. METHODS: Forty carious and twenty non-carious human permanent molars were used. Molars were randomly distributed into three main groups: Group 1 (negative control) - sound molars, Group 2 (positive control) - molars were left without caries removal and Group 3 (Test Group) caries excavated with enzymatic based CMCR agent. After caries excavation and restoration application, all specimens were prepared Vickers microhardness test (VHN), for elemental analysis using Energy Dispersive Xray (EDX) mapping and finally chemical analysis using Micro-Raman microscopy. RESULTS: Vickers microhardness values of dentin with the claimed bioactive GIC specimens was statistically higher than with glass hybrid GIC specimens. EDX analysis at the junction estimated: Calcium and Phosphorus of the glass hybrid GIC showed insignificantly higher mean valued than that of the bioactive GIC. Silica and Aluminum mean values at the junction were significantly higher with bioactive GIC specimens than glass hybrid GIC specimen. Micro-raman spectroscopy revealed that bioactive GIC specimens showed higher frequencies of v 1 PO 4, which indicated high level of remineralization. CONCLUSIONS: It was concluded that ion-releasing bioactive resin-based restorative material had increased the microhardness and remineralization rate of carries affected and sound dentin. In addition, enzymatic caries excavation with papain-based CMCR agent has no adverse effect on dentin substrate.

Enamel Matrix Derivative, 58S5 Bioactive Glass, and Fluoride Varnish for Enamel Remineralization: A Multi-analysis Approach.

PURPOSE: This study aimed to evaluate the enamel remineralization efficacy of enamel matrix derivative (EMD), experimental bioactive glass (BAG), and fluoride varnish in vitro. METHODS AND MATERIALS: Artificial initial caries lesions were developed on fifty human enamel specimens using demineralization solution (pH 4.5, 37°C, 96 hours). Specimens were randomly assigned to five groups (n=10): I-5% NaF varnish (Enamelast), II-experimental 58S5 BAG+37% phosphoric acid (PA), III-EMD (Emdogain) + Ethylenediaminetetraacetic Acid (EDTA), IV-EMD+37% PA, V-Control (untreated). All remineralization agents were applied with pH cycling for seven days. The specimens were scanned by spectral domain optical coherence tomography (SD-OCT) at baseline, at demineralization, and after pH cycling. Lesion depths were measured using image analysis software (ImageJ). Lesions were evaluated using surface microhardness (SMH) and two fluorescence methods (FluoreCam and DIAGNOdent Pen [DDPen]). The data were statistically analyzed by Kruskal Wallis, Friedman, and Wilcoxon tests (α=0.05). RESULTS: According to SD-OCT results, fluoride varnish was found to be the most effective agent in reducing lesion depth (p=0.005). All agents increased the SMH values after pH cycling. No significant difference was found among fluoride varnish, BAG, and EMD+PA groups. These SMH values were significantly higher than EMD+EDTA and control groups (p<0.001). All groups showed lower DDPen scores compared with the control group (p<0.001), however, no significant difference was found among the remineralization agents. In FluoreCam assessment, size and intensity values of all treated groups showed improvement. However, there was no significant difference between the treatment groups in terms of FluoreCam size measurements (p=0.186). CONCLUSION: 58S5 BAG and EMD+PA have remineralization capacity as effective as fluoride varnish. EMD+PA showed better SMH and lesion intensity results than EMD+EDTA.

Interplay Between Minerals in Bottled Water and Fluoride Toothpaste and Caries Lesion Remineralization.

OBJECTIVES: he aim of this in vitro study was to evaluate the effects of some bottled waters on fluoride toothpaste efficacy in enhancing caries lesion remineralization. METHODS: Early caries lesions were created in bovine enamel specimens and stratified into treatment groups based on Vickers surface microhardness (VHN). The present study followed a two (fluoride and fluoride-free toothpaste) by five (four bottled waters and tap water) factorial design. The treatment groups were bottled water with the following attributes: (a) 309.9 ppm Ca/1.20 ppm F; (b) 118.4 ppm Ca/0.16 ppm F; (c) 1.00 ppm Ca/1.01 ppm F; and (d) 0.1 ppm Ca/0.04 ppm F and tap water (48.7 ppm Ca/0.7 ppm F). The five water groups were paired either with 1100 ppm fluoride or fluoride-free toothpaste, yielding 10 groups. Specimens were pH-cycled for 10 days with the daily regimen comprised of twice daily toothpaste slurry, with four exposures to water in between. VHN was measured again and the difference was calculated (ΔVHN). Data were analyzed using two-way ANOVA at a 5% significance level. RESULTS: The two-way interaction between water and toothpaste was significant (p<0.001). All groups except fluoride-free toothpaste/bottled water with 0.1 ppm Ca/0.04 ppm F (p=0.411) had significant increases in VHN after pH cycling (p≤0.023). Fluoridated toothpaste resulted in a higher rate of remineralization compared to fluoride-free toothpaste (all p<0.001). Bottled water with 1.20 ppm F/309.9 ppm Ca exhibited the greatest extent of remineralization within fluoride toothpaste groups (p<0.001) and higher remineralization than lower fluoride water in fluoride-free toothpaste groups (p≤0.006). Within the fluoridated toothpaste group, tap water exhibited significantly less remineralization than all bottled waters (all p<0.001). CONCLUSION: Within the limitation of this study, bottled water with higher fluoride and calcium concentrations might improve fluoridated toothpaste efficacy by enhancing remineralization of early enamel caries-like lesions.