[Time wears on everyone, but not equally quickly]. / Tijd slijt voor iedereen, maar niet voor iedereen even snel.

In 30 patients (average age 38 ± 8 years, 77% male, 23% female) with intra-oral scans made at intake and after 3 years, tooth wear progression was measured. With the aid of GeoMagic to superimpose the scans, the maximum difference in height of 64 surfaces was measured per surface. A large variation was found in progression rates between patients, between various teeth in a single mouth, and between surfaces on a single tooth. Tooth wear progression rates are therefore highly individual and can even be very localized. Treatment must therefore be individualized, with an essential role for measuring tooth wear when deciding on the need for restorative treatment.

Oral and dental health status in patients with chronic headache.

INTRODUCTION: Headache is an illness with high prevalence and adverse effects on quality of life. As oral or dental problems such as pain can trigger or aggravate it, we aimed to investigate and compare oral and dental health status in patients affected with chronic headaches and healthy individuals. METHODS: The present case-control study included 60 patients with chronic headaches (case) and 60 healthy individuals (control) in Rasht, Iran. The demographic characteristics and clinical examinations, including decayed/missing/filled teeth (DMF-T) and community periodontal index of treatment needs (CPITN) indices, as well as bruxism, frequency of tooth brushing and flossing, and maxillary and mandibular tooth wear were recorded in a checklist. Data analysis was performed using the IBM SPSS version 28 at a significance level of 0.05. RESULTS: The case group consisted of 25 men (41.7%) and 35 women (58.3%) with an average age of 32.55 ± 6.62 years, while the control group had 27 men (45%) and 33 women (55%) with an average age of 30.95 ± 6.33 years. The study groups were not significantly different in bruxism, frequency of tooth brushing and flossing, DMFT, CPTIN, and maxillary and mandibular tooth wear. CONCLUSION: It seems that chronic headaches do not significantly affect the oral and dental health of the sufferers. Moreover, it appears that these patients are well aware of the role of oral and dental hygiene in triggering or aggravating the episodes of headaches.

Analysis and comparison of tooth wear in late antiquity and early middle age in populations that lived in continental and coastal Croatia using digitized VistaMetrix method.

BACKGROUND: Tooth wear is a non-pathological loss of hard tissues on the incisal and occlusal tooth surface. In archaeology, the loss of dental tissue through attrition is associated with living opportunities and habits, availability, characteristics and methods of food preparation. In forensics, tooth wear is used to estimate the dental age on cadavers. MATERIAL AND METHODS: For this study, we used an archaeological sample from two sample collections. In this study, tooth wear was compared in archaeological samples of well-preserved maxilla and mandible specimens (n=392) from Croatian coastal and continental populations from Late Antiquity (LA) and the Early Middle Ages (EMA). The computer system VistaMetrix 1.38 was used to analyse the abrasion and attrition of hard dental tissues. The Shapiro-Wilk and chi-square tests were performed for categorical data to test the difference between two historical periods and two geographical locations, while the Kruskal-Wallis test was performed for continuous data. RESULTS: There was a statistically significant difference in the proportion of tooth wear in total teeth area (P < 0.001) when comparing continental and coastal Croatia in LA and coastal Croatia between LA and EMA (P = 0.006 and P < 0.001, respectively). Samples from coastal Croatia from the LA period had the lowest percentage of tooth wear with a median of 8.35%, while samples from coastal Croatia from the EMA had the highest percentage of tooth wear with a median of 18.26%. Our results generally show greater tooth wear in the EMA period in male subjects. CONCLUSION: The results of the tooth wear research obtained with the Vista Metrix software can contribute to the study of life circumstances and changes that the analysed population has experienced in its historical development.

The role of orthodontics in the management of tooth wear.

Pathological tooth wear is a dental problem that affects all age groups and appears to be increasing in prevalence. A subset of these patients may benefit from a combination of orthodontic and restorative care which will be discussed in this article. Orthodontics can help to create the necessary vertical, anterior-posterior and mesio-distal space for restorative work, reducing the need for tooth reduction and lessening the biological costs of restorative care, helping to reposition the gingival margins where this impacts upon aesthetics, as well as correcting co-existing malocclusion.

Isotopological remeshing and statistical shape analysis: Enhancing premolar tooth wear classification and simulation with machine learning.

OBJECTIVE: The aim of this study was to evaluate the accuracy of a combined approach based on an isotopological remeshing and statistical shape analysis (SSA) to capture key anatomical features of altered and intact premolars. Additionally, the study compares the capabilities of four Machine Learning (ML) algorithms in identifying or simulating tooth alterations. METHODS: 113 premolar surfaces from a multicenter database were analyzed. These surfaces were processed using an isotopological remeshing method, followed by a SSA. Mean Euclidean distances between the initial and remeshed STL files were calculated to assess deviation in anatomical landmark positioning. Seven anatomical features were extracted from each tooth, and their correlations with shape modes and morphological characteristics were explored. Four ML algorithms, validated through three-fold cross-validation, were assessed for their ability to classify tooth types and alterations. Additionally, twenty intact teeth were altered and then reconstructed to verify the method's accuracy. RESULTS: The first five modes encapsulated 76.1% of the total shape variability, with a mean landmark positioning deviation of 10.4 µm (±6.4). Significant correlations were found between shape modes and specific morphological features. The optimal ML algorithms demonstrated high accuracy (>83%) and precision (>86%). Simulations on intact teeth showed discrepancies in anatomical features below 3%. CONCLUSION: The combination of an isotopological remeshing with SSA showed good reliability in capturing key anatomical features of the tooth. CLINICAL SIGNIFICANCE: The encouraging performance of ML algorithms suggests a promising direction for supporting practitioners in diagnosing and planning treatments for patients with altered teeth, ultimately improving preventive care.

The survival and clinical performance of anterior composite resin restorations and posterior indirect and cast restorations used to treat generalised tooth wear.

Objective To evaluate the survival and clinical performance of restorative materials used in the rehabilitation of generalised severe tooth wear within a UK NHS postgraduate teaching hospital.Methods The clinical performance of 527 restorations on 20 patients with generalised severe tooth wear was reviewed after a mean period of five years. Anterior teeth were restored with direct composite resin and posterior teeth with indirect restorations. The study used the modified United States Public Health Service criteria for restoration assessment. Survival of the restorations was analysed using Kaplan-Meier survival curves, the log-rank test and the Cox proportional hazards regression analysis.Results The sample included 20 participants: 13 men and 7 women, with a median age of 51.8 years (range: 33-73 years). The median survival time for all restorations was 11.3 years when major failures were considered and 5.9 years for restorations when all types of failure were considered. A median survival time of 5.9 years for composite resin restorations and over seven years for cast restorations was found when considering all failures. Composite resin restorations commonly failed as a result of fracture, wear and marginal discolouration. Factors significantly influencing restoration survival were the material used, aetiology, incisal relationship and tooth location. The biological complications associated with this treatment regime were rare. Patient satisfaction remained generally high, with greatest dissatisfaction related to treatment time.Conclusions The use of anterior composite resin with posterior indirect restorations to treat generalised severe tooth wear is a viable treatment modality with very few major complications.

An experimental approach on dynamic occlusal fingerprint analysis to simulate use-wear localisation and development on stone tools.

Information about the use of stone tools in the past is encoded in the wear patterns left on their surface; however, post-depositional processes can modify and obstruct these traces. One aim in the field of lithic functional analysis is to develop methods to detect and quantify these traces on stone tools. The occlusal fingerprint analysis (OFA) is a well-established method in dental wear studies to virtually simulate dental occlusal (contact between teeth) stroke movements and thus locate and quantify the sequential contact between opposing tooth crowns. Reaching across disciplines, we conducted controlled experiments to test the applicability of the OFA method on stone tools to address the challenge of use-wear quantification and localisation, and therefore the identification of post-depositional wear. Our findings reveal a clear overlap between zones of experimentally produced use-wear and OFA-calculated contact areas. We demonstrate OFA as a potential method to generate models of multiscale use-wear that can be used as references on experimental tools to identify post-depositional surface modifications on stone tool artefacts.

No-prep dentistry using the Simple Orthodontic Extrusion (SOE) technique to create occlusal space. Illustration in tooth wear and resin-bonded bridges

In restorative dentistry, the lack of occlusal space may lead to the mutilation of healthy tissue in order to provide sufficient space for the restorative material. Noprep dentistry can be achieved by placing high-bite restorations, followed by Simple Orthodontic Extrusion (SOE) of other teeth to close the created open bite. This rapid, partial orthodontic treatment is well accepted by patients as it can be easily performed using simple buttons, and it takes only a few weeks to reestablish occlusal contacts. The SOE technique is a further development of the Dahl concept. It has the advantages without the disadvantages. Two applications of this technique are presented in this article: the treatment of the severe wear of anterior teeth with no-prep palatal veneers made of Polymer-infiltrated Ceramic Network (PICN, 'hybrid ceramic') material and the realization of no-prep zirconia resin-bonded bridges (RBBs) to replace missing lateral incisors. An original 3D-printed resin guide for correctly positioning RBBs and facilitating the removal of excess composite cement is also presented. This work highlights the considerable advantages of multidisciplinary collaboration in the field of minimally invasive dentistry.

EFFECT OF LASER IRRADIATION ASSOCIATED WITH FLUORIDE IN DECREASING EROSIVE TOOTH WEAR: A SYSTEMATIC REVIEW WITH A NETWORK META-ANALYSIS  .

OBJECTIVE: The present systematic review with a network meta-analysis (NMA) aimed to evaluate the effect of high-power lasers, associated or not with fluoride compounds, to control and prevent Erosive Tooth Wear (ETW). METHODS: The review was registered in the PROSPERO (CRD42021242547) and followed the PICO question: P (population): enamel and dentin substrate; I (Intervention): high-power laser irradiation, associated or not with fluoride compounds; C (Control): no-treatment; and O (Outcomes): prevention/control of ETW. The electronic databases PubMed, Scopus, and EMBASE were searched. Two independent reviewers evaluated in vitro and in situ studies. The risk of bias was assessed using the RoBDEMAT tool. The estimated treatment effect derived from direct and indirect comparisons were analyzed and the difference between these effects was calculated based on the data of enamel and dentin surface loss (in µm). RESULTS: A total of 179 studies were retrieved and after the exclusion of duplicates, 103 studies had their titles and abstracts evaluated. Thirty-nine studies had their full text analyzed for data extraction (Cohen Kappa = 0.88). For sound enamel, the laser irradiation (L), fluoride application (F) and, the association of treatments (L + F) promoted higher protection than No-Treatment (NT). For eroded enamel, L + F and F did not differ, but both treatments reduced surface loss compared to NT and L. For sound and eroded dentin, treatments with laser increased surface loss. CONCLUSIONS: Although a high-power laser has some potential to prevent erosive tooth wear, this effect is not better than that of standard fluoride. The use of laser in the management of dentin erosive wear can be harmful.

Trophic evolution in ornithopod dinosaurs revealed by dental wear.

Ornithopod dinosaurs evolved numerous craniodental innovations related to herbivory. Nonetheless, the relationship between occlusion, tooth wear rate, and tooth replacement rate has been neglected. Here, we reconstruct tooth wear rates by measuring tooth replacement rates and tooth wear volumes, and document their dental microwear. We demonstrate that total tooth volume and rates of tooth wear increased steadily during ornithopod evolution, with deeply-nested taxa wearing up to 3360 mm3 of tooth volume/day. Increased wear resulted in asymmetric tooth crown formation with uneven von Ebner line increment width by the Late Jurassic, and in faster tooth replacement rates in multiple lineages by the mid-Cretaceous. Microwear displays a contrasting pattern, with decreasing complexity and pit percentages in deeply-nested and later-occurring taxa. We hypothesize that early ornithopods were browsers and/or frugivores but deeply nested iguanodontians were bulk-feeders, eating tougher, less nutritious plants; these trends correlate with increasing body mass and longer gut passage times.

Morphological characteristics of non-carious cervical lesions. A systematic review.

OBJECTIVES: This systematic review assessed the morphological characteristics of non-carious cervical lesions (NCCL), among clinical and ex-vivo studies assessed by observational and imaging methods. DESIGN: The search strategy was conducted on four online databases (MEDLINE, Embase, Scopus and Web of Science) and grey literature (Google Scholar and OpenGrey). The study selection was performed by three reviewers from March to September (2023). The eligibility criteria were established according to the PICO strategy and included NCCL, morphological characteristics and clinical and ex-vivo study designs. The data extraction considered general data that identifies the study, evaluation method, parameter to assess the outcome and the main results for each study. The risk of bias was evaluated using Joanna Briggs Institute critical appraisal tool, and a personalized tool. RESULTS: The search resulted in 252 studies. A total of 14 studies were included. Prevalence of NCCLs ranged from 3.5 %to 77.78 % with a higher presence in premolars. Common characteristics were wear facets, occluded tubules or cracks, occlusal stress, scratch marks, dimples and craters, structure loss, and dentin sclerosis, which appear more often on buccal surface and were generally classified as wedge-shaped, saucer-shaped. Etiological hypothesis was mainly related to multifactorial factors. In most of the studies, the risk of bias was classified as high. CONCLUSIONS: The morphological characteristics of NCCL showed a wide range of descriptions regarding appearance, prevalence, lesion-related measures, and macro and microscopic descriptions.

An international, open-access dataset of dental wear patterns and associated broad age classes in archaeological cattle mandibles.

Zooarchaeologists investigate past interactions between animals, humans, and their environments by analyzing the remains of archaeological fauna. Age-at-death distributions are fundamental to faunal analysis and are often estimated by comparing exposed dentine patterns to standardized tooth wear stages that have been associated with relative age classes. We present Bubona, an international dataset of dental wear patterns and associated broad age classes in archaeological cattle mandibles. Our open-access dataset of 1460 data entries from nine counties is being used to create tooth-type specific reference tables of probable age class attribution for cattle mandibles lacking complete dentition. Bubona is a valuable resource for the innovation of new systems of age estimation for cattle and it is the creators hope that researchers will continue to both help expand the dataset by contributing their own data, as well as utilize the data to refine and innovate age-at-death estimation methods.

An evaluation of antagonist enamel wear opposing full-coverage zirconia crowns versus other ceramics full-coverage crowns and natural enamel - An umbrella review.

AIM: The aim of this umbrella review was to systematically review the systematic reviews on antagonist enamel wear opposing zirconia crowns compared to other ceramics and natural enamel. SETTINGS AND DESIGN: This was an umbrella review following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. MATERIALS AND METHODS: An electronic search of PubMed, Cochrane Central, EBSCOhost, and Google Scholar search engines for articles published from January 1, 2013, to January 1, 2023, was conducted using keywords "enamel wear," "zirconia," "feldspathic," "dental ceramics," and "Y-TZP" to identify systematic reviews on antagonist enamel wear opposing zirconia crowns compared to other ceramics and natural enamel. STATISTICAL ANALYSIS USED: Qualitative analysis. RESULTS: A total of 86 articles were obtained through electronic search, of which four articles were selected after abstract screening that met the inclusion criteria for evaluating antagonist enamel wear. As compared to feldspathic groups, zirconia had substantially less antagonist wear, while surface polishing exhibited less enamel wear than glazing. Because of the heterogeneity in study design, measurement methods, and outcome variables, a meta-analysis was not possible. CONCLUSIONS: Over time, the opposing enamel wear caused by polished monolithic zirconia will be either equal to or less than that of natural enamel wear. Polished monolithic zirconia also maintains lower values of enamel wear compared to metal ceramics, feldspathic porcelains, and lithium disilicate.

Assessing tooth wear progression in non-human primates: a longitudinal study using intraoral scanning technology.

Intraoral scanners are widely used in a clinical setting for orthodontic treatments and tooth restorations, and are also useful for assessing dental wear and pathology progression. In this study, we assess the utility of using an intraoral scanner and associated software for quantifying dental tissue loss in non-human primates. An upper and lower second molar for 31 captive hamadryas baboons (Papio hamadryas) were assessed for dental tissue loss progression, giving a total sample of 62 teeth. The animals are part of the Southwest National Primate Research Center and were all fed the same monkey-chow diet over their lifetimes. Two molds of each dentition were taken at either two- or three-year intervals, and the associated casts scanned using an intraoral scanner (Medit i700). Tissue loss was calculated in WearCompare by superimposition of the two scans followed by subtraction analysis. Four individuals had dental caries, and were assessed separately. The results demonstrate the reliability of these techniques in capturing tissue loss data, evidenced by the alignment consistency between scans, lack of erroneous tissue gain between scans, and uniformity of tissue loss patterns among individuals (e.g., functional cusps showing the highest degree of wear). The average loss per mm2 per year for all samples combined was 0.05 mm3 (0.04 mm3 for females and 0.08 mm3 for males). There was no significant difference in wear progression between upper and lower molars. Substantial variation in the amount of tissue loss among individuals was found, despite their uniform diet. These findings foster multiple avenues for future research, including the exploration of wear progression across dental crowns and arcades, correlation between different types of tissue loss (e.g., attrition, erosion, fractures, caries), interplay between tissue loss and microwear/topographic analysis, and the genetic underpinnings of tissue loss variation.

Evidence-based clinical management of localised tooth wear and a repeatedly dislodged posterior crown utilising the Dahl Concept.

This clinical case report demonstrates the use of the Dahl Concept in the management of the repeated dislodgement of a posterior full coverage crown associated with a reduced restorative space. The described technique harnesses the addition of resin composite and a temporarily cemented provisional full coverage crown to create sufficient restorative space for the cementation of a definitive posterior full coverage crown restoration at the six-month review.

Prospective case series study on the survival rates of occlusal polymethyl methacrylate veneers as a semipermanent therapy in patients with severe pathologic tooth wear.

OBJECTIVES: To evaluate the survival rate of minimally invasive semipermanent occlusal polymethyl methacrylate (PMMA) onlays/veneers in previous temporomandibular disorder (TMD) patients with severe tooth wear and with a loss of vertical dimension after up to 7 years. METHOD AND MATERIALS: This case series was designed as a follow-up evaluation with consecutive patient recruitment. All patients bearing the indication for this kind of rehabilitation were treated by the same clinician using the same adhesive methodology. The study included 22 patients (3 men/19 women), with a mean ± SD age of 50.7 ± 11.6 years. Controls followed within the first 4 weeks (and subsequently as required). Failure criteria included damage by fracture, chipping, and retention loss. Survival rates were determined based on the Kaplan-Meier analysis. RESULTS: 328 semipermanent occlusal/incisal veneers were included (142 maxillary/186 mandibular teeth). Almost 80% of the restorations were in place and in function when starting the follow-up treatment after 180 days; failures predominantly occurred within the first 3 to 6 months but proved reparable. Depending on the patients' priorities, scheduled replacements followed successively, and more than 65% did not show repair or any renewal needs for more than 360 days. CONCLUSION: Within the limitations of this study the survival rates of occlusal veneers made of PMMA were sufficiently high to allow for consecutive treatment of the respective teeth by means of permanent restorations while preserving the restored vertical dimension. In patients with severe tooth wear and a TMD history, semipermanent restorative therapy with occlusal PMMA onlays/veneers would seem a noteworthy option.

Dental disease in a 15th-17th centuries skeletal sample of enslaved Africans (Lagos, Portugal).

OBJECTIVE: Dental disease is frequently used as a proxy for diet and overall health of individuals of past populations. The aim of this study is to investigate dental disease in a sample of enslaved African individuals recovered from an urban dump (15th-17th centuries) in Lagos, Portugal. DESIGN: In all, 81 African individuals (>12 years old) were analysed (19 males, 49 females, and 13 of unknown sex), in a total of 2283 alveoli, 2061 teeth, and 2213 interdental septa. Analysed oral pathologies include dental caries, periodontal disease, and ante-mortem tooth loss. Dental wear was also recorded. RESULTS: Dental caries affected 52.0 % of the teeth, although only 31.9 % were cavitated lesions. In all, 96.3 % of the individuals presented at least one cariogenic lesion. Gingivitis and periodontitis were recorded in 56.7 % and 19.0 % of the septa, respectively. Only one male individual had all septal areas healthy. Ante-mortem tooth loss was recorded in 38.3 % of the individuals, in a total of 96 teeth lost (4.2 %). Regarding occlusal wear, 70.8 % of the surfaces were recorded with grades 1-3. CONCLUSIONS: The frequencies of the oral pathological conditions observed may not only reflect a cariogenic diet (rich in starches and with a high frequency of meals) but also the conditions during the maritime voyage of the first victims of the North Atlantic slave trade (xerostomia due to lack of water, sea sickness and vomiting, vitamin C deficiency, poor hygiene), and also the impact intentional dental modifications had on the dentitions.

Intraoral scanner-based monitoring of tooth wear in young adults: 36-month results.

OBJECTIVES: The study continues our longitudinal observation of wear aiming to further monitoring of progression and lesion morphology and to identify relationships with assumed aetiological factors. MATERIALS AND METHODS: Molars (FDI #36 or #46) of 74 participants (23.8 ± 2.2 years) were scanned (Trios 3, 3Shape) at the third follow-up (T3; observation period 1,111 ± 10 days). Data sets from T3, T2 (24-month follow-up) and T1 (12-month follow-up) were superimposed with baseline in a 3D analysis software (GOM Inspect). Wear was quantified as maximum vertical tissue loss (µm; median, 95% CI) in various occlusal areas (4/5 cusps and 2 ridges). Morphologies were classified into cupping (C), facet (F), and combined cupping-facet (CF). Aetiological factors were assessed with questionnaires. RESULTS: Wear increased at T3 significantly at low rates in all areas of the occlusal surface (median between 7.0 (4.0;10.5) and 9.5 (6.0;15.0) µm). There was a clear trend for higher loss values in males, but no association with other factors such as nutrition. C and CF showed significantly higher loss values than F. Areas without initial wear developed F first, which either persisted or developed into C and CF. CONCLUSIONS: Wear continued at low rates with C/CF morphology and sex as significant factors. Cupped lesions seem to develop from facets and thus may not be a valid diagnostic criterion for erosive tooth wear. CLINICAL RELEVANCE: Wear is a cumulative process that apparently follows complex mechanisms that cannot be conceptualized in simplified terms; C and CF may be indicators for higher progression rates.

Hard drugs use and tooth wear: a scoping review.

OBJECTIVES: This study aims to map evidence on the relationship between hard drug use and dental wear. The scoping review is guided by the question: What is the relationship between hard drug consumption and dental wear? MATERIALS AND METHODS: Adhering to PRISMA-ScR guidelines, searches were conducted across PubMed, Embase, and four databases in March 2024. Inclusion criteria included studies investigating the association between hard drug use and dental wear, regardless of publication date or language. Data were presented through narrative exposition, tables, and a conceptual framework. RESULTS: Twenty-eight studies (four case-control, three cross-sectional, five case reports, and sixteen literature reviews) were included. Among case-control studies, 75% observed an association between drug use and dental erosion; however, no cross-sectional studies demonstrated this association. Despite questionable quality, reviews established connections between drug use and dental erosion. Studies aimed to elucidate potential causes for dental erosion. CONCLUSIONS: Analysis suggests a potential link between hard drug use and dental wear, though indirect. Factors like bruxism and reduced salivary pH may contribute to dental wear among drug users. Further investigation through primary studies exploring this relationship is necessary. CLINICAL RELEVANCE: Dentists should focus not only on clinical characteristics of dental wear but also on mediating factors such as bruxism and decreased salivary pH associated with drug use. This holistic approach allows for a deeper understanding of dental wear mechanisms, enabling targeted preventive and therapeutic interventions.