End-to-End Ultrasonic Hand Gesture Recognition.

As the number of electronic gadgets in our daily lives is increasing and most of them require some kind of human interaction, this demands innovative, convenient input methods. There are limitations to state-of-the-art (SotA) ultrasound-based hand gesture recognition (HGR) systems in terms of robustness and accuracy. This research presents a novel machine learning (ML)-based end-to-end solution for hand gesture recognition with low-cost micro-electromechanical (MEMS) system ultrasonic transducers. In contrast to prior methods, our ML model processes the raw echo samples directly instead of using pre-processed data. Consequently, the processing flow presented in this work leaves it to the ML model to extract the important information from the echo data. The success of this approach is demonstrated as follows. Four MEMS ultrasonic transducers are placed in three different geometrical arrangements. For each arrangement, different types of ML models are optimized and benchmarked on datasets acquired with the presented custom hardware (HW): convolutional neural networks (CNNs), gated recurrent units (GRUs), long short-term memory (LSTM), vision transformer (ViT), and cross-attention multi-scale vision transformer (CrossViT). The three last-mentioned ML models reached more than 88% accuracy. The most important innovation described in this research paper is that we were able to demonstrate that little pre-processing is necessary to obtain high accuracy in ultrasonic HGR for several arrangements of cost-effective and low-power MEMS ultrasonic transducer arrays. Even the computationally intensive Fourier transform can be omitted. The presented approach is further compared to HGR systems using other sensor types such as vision, WiFi, radar, and state-of-the-art ultrasound-based HGR systems. Direct processing of the sensor signals by a compact model makes ultrasonic hand gesture recognition a true low-cost and power-efficient input method.

Multimode ultrasonic-assisted decontamination of fruits and vegetables: A review.

Fruits and vegetables (F&V) are a significant part of our diet consumption. Microbial and pesticide residues are the predominant safety hazards of F&V consumption. Ordinary water washing has a very limited effect on removing microorganisms and pesticide residues and requires high water usage. Ultrasound, as an environmentally friendly technology, shows excellent potential for reducing microbial contamination and pesticide residue. This paper summarizes the research on ultrasound application in F&V washing, including the removal of microbial and pesticide residues and the comprehensive effect on their physicochemical characteristics. Furthermore, multimode ultrasonic-assisted techniques like multi-frequency and sequential ultrasound, combined with novel and conventional methods, can enhance the ultrasound-based effect and be more effective and sustainable in preventing F&V from microbial contamination. Overall, this work explicitly establishes the background on the potential for ultrasound cleaning and disinfection in the food industry as a green, effective, and ultimate method of preventing foodborne illnesses.

Trauma e gestação / Trauma and pregnancy

A incidência de trauma durante a gestação é de 6% a 8% (formas graves de trauma: 3%-6%). Das gestantes que necessitam de internação por causa de um trauma, 60% evoluem para o parto. As gestantes têm 1,6 vez mais chances de morrer numa situação de trauma. As alterações anatômicas e fisiológicas da gestação interferem nas repercussões e na abordagem do trauma. A violência doméstica representa o mecanismo mais comum de trauma para a gestante e desencadeia várias complicações obstétricas, devendo ser, idealmente, identificada no pré-natal. No acidente automobilístico, atenção especial deve ser dada ao diagnóstico de descolamento prematuro de placenta (DPP). O ultrassom na sala de trauma possibilita ação na assistência ao trauma e também, como mecanismo rápido, informações necessárias sobre o feto e a gestação (FAST fetal). A maioria dos exames de imagem necessários para a boa assistência ao trauma não representa agravos à gestação. O pré-natal tem papel importante na prevenção dos traumas na gestação. A ação conjunta do cirurgião do trauma e do obstetra é recomendada no atendimento da gestante traumatizada, principalmente nos casos graves e em gestantes acima de 20-24 semanas

Portable Microwave-Acoustic Coaxial Thermoacoustic Probe With Miniaturized Vivaldi Antennas for Breast Tumor Screening.

Microwave-induced thermoacoustic (TA) imaging (MTAI), which exploits dielectric contrasts to provide images with high contrast and spatial resolution, holds the potential to serve as an additional means of clinical diagnosis and treatment. However, conventional MTAI usually uses large and heavy metal antennas to radiate pulsed microwaves, making it challenging to image different target areas flexibly. In this work, we presented the design and evaluation of a portable microwave-acoustic coaxial TA probe (51 mm × 63 mm × 138 mm) that can flexibly image the region of interest. The TA probe contains two miniaturized symmetrically distributed Vivaldi antennas (7.5 g) and a 128-element linear ultrasonic transducer. By adjusting the geometry of the antennas and the ultrasonic transducer, the TA probe's acoustic field and microwave field can be designed to be coaxial, which helps achieve homogeneous microwave illumination and high-sensitivity ultrasonic detection. The practical feasibility of the proposed probe was tested on an in vitro ewe breast and a healthy volunteer. The results demonstrate that the MTAI system with the proposed TA probe can visualize the anatomical structure of the breast tumor in ewe breast and a healthy volunteer breast with resolutions in hundreds of microns (transverse: 910 µm, axial: 780 µm) and an excellent signal-to-noise ratio can be obtained in deep adipose tissue (10 dB in 6 cm fat). The miniaturized portable TA probe takes a solid step forward in translating MTAI technology to clinical breast tumor diagnosis.

Characterization of Ultrasound Surgical Devices.

This article is a review of the techniques for characterizing ultrasound surgical devices, as a guide to those undertaking a program of measurement, and as a basis for further standardization of those methods. The review covers both acoustic and nonacoustic measurements, with an emphasis on proper techniques, devices, and analyses according to the IEC Standard 61847. Low-frequency hydrophone measurements are presented, which are centered on simple acoustic theory. Inertial cavitation measurements are described based on detailed analyses of shock wave propagation. Cutting force tests are also presented as a basis for determining relative performance characteristics and determining mechanisms of action. Example data from each type of test are given. Comparison between acoustic output measurements, in vitro data, and clinical outcomes help establish that inertial cavitation is the predominant mechanism of soft tissue erosion and emulsification. The test results also demonstrate approaches to improving efficiency while minimizing undesired effects. Finally, recommendations are made for updates to the 61847 Standard and for other device labeling that would improve patient safety.

Estimulação elétrica nervosa transcutânea (tens) e ultrassom para os sintomas da síndrome do intestino irritável: um estudo de caso / Transcutaneous nervous electrical stimulation (tens) and ultrasound for irritable bowel syndrome symptoms: a case study / Estimulación nerviosa eléctrica transcutánea (tens) y ultrasonido para los síntomas del síndrome del intestino irritable: un estudio de casos

Introdução: O intestino é um órgão vital, entretanto, seu mau funcionamento pode gerar alguns distúrbios como por exemplo, "A síndrome do intestino irritável". O quadro desses pacientes são dores na barriga, inchaço abdominal e alteração na frequência das evacuações e na consistência das fezes. A fisioterapia tem apresentado meios que favorecem analgesia. Objetivo: Verificar os efeitos da Estimulação Elétrica Nervosa Transcutânea (TENS) e do Ultrassom (US) nos sintomas da síndrome do intestino irritável. Método: Foi utilizado o TENS na região abdominal, durante 15 minutos. O Ultrassom foi usado durante 3 minutos em cada região abdominal, somando 12 minutos ao total. O tratamento foi realizado durante um mês, com 9 sessões. Utilizou-se a Escala Visual Analógica (EVA) e o questionário Inflammatory Bowel Disease Questionnaire (IBDQ). Resultados: Nos sintomas intestinais obteve-se progresso de 5 pontos no questionário IBDQ e nos sintomas emocionais houve uma evolução de 9 pontos, sendo este, estatisticamente significante. Na escala EVA a média de escore diminui de 5,6 para 3,6 ao final da intervenção. Conclusão: A intervenção fisioterapêutica surtiu efeitos positivos e contribuiu para a diminuição da dor e os outros sintomas como: inchaço abdominal e diminuição na quantidade de evacuações e essa evolução auxiliou na qualidade de vida do voluntário.

Introduction: The intestine is a vital organ, however, due to its malfunction, some disorders appear, for example, "The irritable bowel syndrome", patients with this syndrome experience pain in the belly, abdominal swelling, changes in the frequency of bowel movements and stool consistency. Physiotherapy uses means that help to cause analgesia. Objective: To verify the effects of TENS and Ultrasound on the symptoms of the individual with irritable bowel syndrome, contributing to the quality of life. Method: TENS was used in the abdominal region in Burst mode with a frequency of 150Hz with amplitude until it caused a slight contraction, for 15 minutes. Ultrasound was used in continuous mode with a frequency of 1MHZ, with a dose of 0.5w / cm2, for 3 minutes in each abdominal region, adding 12 minutes to the total. The treatment was carried out for one month, with 9 sessions. The EVA scale and the IBDQ questionnaire were used. Results: In the intestinal symptoms there was an improvement of 5 points in the IBDQ questionnaire and in the emotional aspect there was an improvement of 9 points and in the emotional aspect it was statistically significant, passing through the Wilcoxon test, P (est.) = 0.031 P (exact) ) = 0.031. On the EVA scale, the mean score before the intervention was 5.6 and at the end 3.6. Conclusion: The physical therapy intervention had positive effects, helping to reduce pain and other symptoms such as:abdominal swelling, decrease in the amount of bowel movements and this improvement helped the individual's emotional state, however a study on the subject is still necessary.

Introducción: El intestino es un órgano vital, sin embargo, su mal funcionamiento puede generar algunos trastornos como el "síndrome del intestino irritable". Los síntomas de estos pacientes son dolor de estómago, hinchazón abdominal y alteración de la frecuencia de las deposiciones y de la consistencia de las heces. La fisioterapia ha presentado medios que favorecen la analgesia. Objetivo: Verificar los efectos de la Estimulación Nerviosa Eléctrica Transcutánea (TENS) y el Ultrasonido (US) en los síntomas del síndrome del intestino irritable. Método: Se utilizó TENS en la región abdominal durante 15 minutos. Los ultrasonidos se utilizaron durante 3 minutos en cada región abdominal, sumando 12 minutos en total. El tratamiento se llevó a cabo durante un mes, con 9 sesiones. Se utilizaron la Escala Visual Analógica (EVA) y el Cuestionario de Enfermedad Inflamatoria Intestinal (IBDQ). Resultados: En los síntomas intestinales hubo una progresión de 5 puntos en el cuestionario IBDQ y en los síntomas emocionales hubo una evolución de 9 puntos, siendo esto, estadísticamente significativo. En la escala VAS, la puntuación media disminuyó de 5,6 a 3,6 al final de la intervención. Conclusión: La intervención fisioterapéutica tuvo efectos positivos y contribuyó a la reducción del dolor y de otros síntomas como: hinchazón abdominal y disminución de la cantidad de deposiciones y esta evolución ayudó a la calidad de vida del voluntario.

Evaluation of ImageJ software in ultrasonic image analysis: Follicular and luteal morphological characteristics of cattle.

This study was conducted to compare the effectiveness of two methodologies in evaluating B- and Doppler-mode ultrasonic images: analysis using ultrasonic software and utilizing a computer with ImageJ software. To determine if ImageJ software utilization is an efficacious alternative to ultrasonic software device- analysis, there were comparisons of values when using the two methods for morphological and vascular characteristics of follicular dynamics and luteal function in 18 crossbred cattle. From day 8 of an ovarian dynamics synchronization treatment regimen period until the time of ovulation (Day 10), B-mode and power-flow ultrasonic cineloops were obtained every 12 h to assess follicular diameter, wall area, and wall blood perfusion area. On Day 14 after ovulation, US cineloops of ovaries were obtained in B mode and power flow to evaluate various morphological and vascular characteristics of the corpus luteum (CL), including luteal diameter, luteal area, and CL blood perfusion area. Cineloops were evaluated and analyzed using ultrasonic software, and in a computer with ImageJ software. To evaluate consistency in results between the two methods, there was evaluation utilizing paired t-test, Pearson correlation coefficient, Bland-Altman plot, and Linear Regression Test procedures to calculate proportion of bias between values for measurements of variables evaluated. Results indicated none of the values for variables before and after ovulation differed (P > 0.05). It, therefore, was concluded that utilization of ImageJ software is an efficacious biomedical technique to analyze ultrasonic images of morphological and vascular characteristics before and after ovulation in cattle.

Muscle architecture of the vastus lateralis and rectus femoris in the production of knee extensor torque in physically inactive women

Abstract Aim: This study aimed to verify the data reliability of muscle architecture (MA) variables, and the relationship between MA and the isometric peak torque (PT) of the monoarticular and biarticular knee extensor (KE) muscle in physically inactive women. Methods: Ten physically inactive women (24.0 ± 1.64 years; 162.9 ± 5.34 cm; 63.5 ± 11.90 kg) participated in the study. An ultrasound device assessed the MA variables (muscle thickness, fascicle length, and pennation angle) of the Vastus Lateralis (VL) and Rectus Femoris (RF), and an isokinetic dynamometer assessed the PT. Pearson correlation evaluated the relationship between PT and MA variables, with a significance level of 5%. Additionally, the intraclass correlation coefficient, coefficient of variation, and standard error of measurement. Results: Excellent reliability between images was observed, and no significant relationships were observed between the PT and MA variables of the VL and RF. Conclusion: Isolated variables of the MA of a monoarticular or a biarticular muscle do not influence the production of the isometric PT of the KE.

Comparison of the resonance sonorheometry based Quantra® system with rotational thromboelastometry ROTEM® sigma in cardiac surgery - a prospective observational study.

BACKGROUND: Measures of the sonorheometry based Quantra® viscoelastic hemostatic analyzer (HemoSonics, LCC, Charlottesville, VA, USA) were compared with corresponding results of the ROTEM® sigma device (Instrumentation Laboratory, Bedford, MA, USA). METHODS: In thirty-eight patients scheduled for elective cardiac surgery between December 2018 and October 2019, blood samples were taken after induction of anesthesia (sample 1) and after heparin neutralization (sample 2) and measured on Quantra (QPlus® Cartridge) and ROTEM sigma (ROTEM® sigma complete + hep Cartridge). Clot times and clot stiffness values were recorded. Clot stiffness values of ROTEM amplitudes (A in mm) were converted to shear modulus (G) in hectoPascal (hPa): G (hPa) = (5 x A)/(100-A). Additionally, time-to-results was recorded. Spearman rank test correlation and Bland Altman analysis were performed. RESULTS: Clot stiffness parameters of the Quantra correlated strongly with corresponding measurements of the ROTEM with r = 0.93 and 0.94 for EXTEM A10 vs CS and r = 0.94 and 0.96 for FIBTEM A10 vs FCS for sample 1 and 2, respectively. Quantra clot time correlated strongly with ROTEM INTEM CT with r = 0.71 for sample 1 and r = 0.75 for sample 2. However, Bland Altman analysis showed no agreement in all compared assays of both methods. The median time to delivery of first and complete results was significantly shorter for Quantra (412 and 658 s) compared to ROTEM sigma (839 and 1290 s). CONCLUSIONS: The Quantra showed a strong correlation with the ROTEM sigma for determining clot times and clot stiffness and the parameters assess similar aspects of clot development. However, these parameters are not directly interchangeable and implicate that separate cut-off values need to be established for users of the Quantra device. Word count: 278. TRIAL REGISTRATION: The study was retrospectively registered with ClinicalTrials.gov (ID: NCT04210830 ) at December 20th 2019.

Artificial Intelligence Assisted Ultrasonic Extraction of Total Flavonoids from Rosa sterilis.

Flavonoids in Rosa sterilis were studied. The flavonoids in Rosa sterilis were extracted by ultrasonic method, and the extraction conditions were modeled and optimized by response the surface methodology and the artificial intelligence method. The results show that the ultrasonic method can effectively extract total flavonoids, and the extraction rate is close to the prediction value of ANN-GA algorithm, which proves the rationality of the model. The order of the effects of the parameters on the experiment was material liquid ratio > extraction power > extraction time > ethanol concentration. In addition, the scavenging effects of flavonoids on DPPH, O2-· and ·OH were also determined, and these indicated that flavonoids have strong antioxidant activities. The kinetics of the extraction process was studied by using the data of the extraction process, and it was found that the extraction process conformed to Fick's first law.

Contact modeling and performance evaluation of ring type traveling wave ultrasonic motors considering stator teeth.

A contact model of ring type traveling wave ultrasonic motors is proposed in this paper in order to investigate the dynamic contact and friction drive mechanism between the stator and rotor. Differing from previous contact models of ring type traveling wave ultrasonic motors, the Dahl friction model is adopted and the stator teeth are taken into account in the proposed model. The normal stress, the tangential stress, and the torque-speed characteristics of the motor are evaluated in detail based on the proposed model. Finally, the torque-speed values of the prototype motor are measured and compared with the calculation ones. The results show that the calculation values are in good agreement with the experimental values, which validates the proposed model. Moreover, the proposed contact model is compared with previous contact models that adopt Coulomb friction law and meanwhile ignore stator teeth by assuming teeth surfaces to be continuous. The comparison results show that the proposed model is more accurate than previous models.

Ultrasonic blood flowmeter with a novel Xero algorithm for a mechanical circulatory support system.

Mechanical circulatory support systems (MCSSs) are crucial devices for transplants in patients with heart failure. The blood flowing through the MCSS can be recirculated or even stagnated in the event of critical blood flow issues. To avoid emergencies due to abnormal changes in the flow, continuous changes of the flowrate should be measured with high accuracy and robustness. For better flowrate measurements, a more advanced ultrasonic blood flowmeter (UFM), which is a noninvasive measurement tool, is needed. In this paper, we propose a novel UFM sensor module using a novel algorithm (Xero) that can exploit the advantages of both conventional cross-correlation (Xcorr) and zero-crossing (Zero) algorithms, using only the zero-crossing-based algorithm. To ensure the capability of our own developed and optimized ultrasonic sensor module for MCSSs, the accuracy, robustness, and continuous monitoring performance of the proposed algorithm were compared to those of conventional algorithms after application to the developed sensor module. The results show that Xero is superior to other algorithms for flowrate measurements under different environments and offers an error rate of at least 0.92%, higher robustness for changing fluid temperatures than conventional algorithms, and sensitive responses to sudden changes in flowrates. Thus, the proposed UFM system with Xero has a great potential for flowrate measurements in MCSSs.

Ultrasonic actuation of a fine-needle improves biopsy yield.

Despite the ubiquitous use over the past 150 years, the functions of the current medical needle are facilitated only by mechanical shear and cutting by the needle tip, i.e. the lancet. In this study, we demonstrate how nonlinear ultrasonics (NLU) extends the functionality of the medical needle far beyond its present capability. The NLU actions were found to be localized to the proximity of the needle tip, the SonoLancet, but the effects extend to several millimeters from the physical needle boundary. The observed nonlinear phenomena, transient cavitation, fluid streams, translation of micro- and nanoparticles and atomization, were quantitatively characterized. In the fine-needle biopsy application, the SonoLancet contributed to obtaining tissue cores with an increase in tissue yield by 3-6× in different tissue types compared to conventional needle biopsy technique using the same 21G needle. In conclusion, the SonoLancet could be of interest to several other medical applications, including drug or gene delivery, cell modulation, and minimally invasive surgical procedures.

Jean-Louis Luche and the Interpretation of Sonochemical Reaction Mechanisms.

Sonochemistry can be broadly defined as the science of chemical and physical transformations produced under the influence of sound. The use of sound energy is rather a young branch of chemistry and does not have the clear definitive rules of other, more established, divisions such as those in cycloaddition reactions or photochemistry. Nevertheless, there are a few guidelines which can help to predict what is going to happen when a reaction mixture is submitted to ultrasonic irradiation. Jean-Louis Luche, formulated some ideas of the mechanistic pathways involved in sonochemistry more than 30 years ago. He introduced the idea of "true" and "false" sonochemical reactions both of which are the result of acoustic cavitation. The difference was that the former involved a free radical component whereas only mechanical effects played a role the latter. The authors of this paper were scientific collaborators and friends of Jean-Louis Luche during those early years and had the chance to discuss and work with him on the mechanisms of sonochemistry. In this paper we will review the original rules (laws) as predicted by Jean-Louis Luche and how they have been further developed and extended in recent years.

Effect of ultrasonic pretreatment monitored by real-time online technologies on dried preparation time and yield during extraction process of okra pectin.

BACKGROUND: Ultrasonic pretreatment is a novel physical method that can be used in the extraction process of okra pectin. Real-time online monitoring technologies were introduced in time and frequency domains when okra was pretreated. Preparation time of dried okra and yield of okra pectin were studied; and physicochemical properties of okra pectin were analyzed at the optimum ultrasonic parameter. RESULTS: Results showed that ultrasonic intensity of sweeping-frequency ultrasonic (SFU) pretreatment was stronger than that of fixed-frequency ultrasonic pretreatment (FFU). SFU pretreatment (60 ± 1 kHz) at 30 min had a strong ultrasonic voltage peak of 0.05387 V and signal power peak of -6.62 dBm. The preparation time of dried okra was 160 ± 14.14 min in the pretreated group, 44.83% lower than control without SFU pretreatment. The intercellular space was 56.03% higher than control. Water diffusion coefficient increased from 1.41 × 10-9 to 2.14 × 10-9  m2  s-1 . Monobasic quadratic equations were developed for the monitored ultrasonic intensity and pectin yield. Compared to control, extraction yield (16.70%), pectin content (0.564 mg mg-1 ), solubility (0.8187 g g-1 ) and gel strength (30.91 g) were improved in the pretreated group. Viscosity decreased, and values of G' and G″ crossing at 63 rad s-1 revealed the viscoelastic behavior and the beginning of viscous behavior with a sol state. CONCLUSION: Decrement of dried preparation time and increment of yield were achieved by ultrasonic pretreatment during the extraction process of okra pectin, and the relationship of ultrasonic intensity monitored by real-time online technologies and yield was given. © 2021 Society of Chemical Industry.

Friction sensing mechanisms for perception and motor control: passive touch without sliding may not provide perceivable frictional information.

Perception of the frictional properties of a surface contributes to the multidimensional experience of exploring various materials; we slide our fingers over a surface to feel it. In contrast, during object manipulation, we grip objects without such intended exploratory movements. Given that we are aware of the slipperiness of objects or tools that are held in the hand, we investigated whether the initial contact between the fingertip skin and the surface of the object is sufficient to provide this consciously perceived frictional information. Using a two-alternative forced-choice protocol, we examined human capacity to detect frictional differences using touch, when two otherwise structurally identical surfaces were brought in contact with the immobilized finger perpendicularly or under an angle (20° or 30°) to the skin surface (passive touch). An ultrasonic friction reduction device was used to generate three different frictions over each of three flat surfaces with different surface structure: 1) smooth glass, 2) textured surface with dome-shaped features, and 3) surface with sharp asperities (sandpaper). Participants (n = 12) could not reliably indicate which of the two surfaces was more slippery under any of these conditions. In contrast, when slip was induced by moving the surface laterally by a total of 5 mm (passive slip), participants could clearly perceive frictional differences. Thus making contact with the surface, even with moderate tangential forces, was not enough to perceive frictional differences, instead conscious perception required a sufficient size slip.NEW & NOTEWORTHY This study contributes to understanding how frictional information is obtained and used by the brain. When the skin is contacting surfaces of identical topography but varying frictional properties, the deformation pattern is different; however, available sensory cues did not get translated into perception of frictional properties unless a sufficiently large lateral movement was present. These neurophysiological findings may inform how to design and operate haptic devices relying on friction modulation principles.

Focused ultrasound phantom model for blood brain barrier disruption.

In this paper a high intensity focused ultrasound (FUS) phantom model was developed, in order to be used in experiments for Blood Brain Barrier (BBB) disruption. The target was to create a phantom model that represents the disruption of the BBB during ultrasound application. An appropriate experimental setup was created bearing a single element transducer with diameter 50 mm and geometric focus 100 mm operating at 0.5 MHz. It included a set of tubes and a connector with multiple 0.4 mm openings, through which a suitable liquid is being circulated with a pump. The lesions were sealed with a thin homogenous layer of wax, preventing a liquid leakage. The system was tested successfully with FUS and a liquid leakage was achieved after FUS application. This set up is the first phantom model that has the potential to be utilized as a cost-effective solution for performing experiments for BBB disruption, without the need of using animal models.

The effect of an ultrasonic spray nozzle on carbohydrate and protein-based coating materials for blueberry extract microencapsulation.

BACKGROUND: An ultrasonic spray nozzle was evaluated for the production of powders and microcapsules, using blueberry extract, modified starch (HI-CAP 100), and whey protein isolate (WPI). The effects of ultrasonic power and the concentration of coating materials on the characteristics of the resulting samples - such as viscosity, particle size, microencapsulation efficiency, color, glass transition temperature, Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), and morphology - were also studied. RESULTS: The apparent viscosity was primarily affected by the self-heating of the ultrasonic nozzle as the power increased. The largest mean particle size of samples was observed under conditions of 30% coating concentration at 10 W. Glass transition temperatures (Tg ) of the samples were affected by all atomization parameters significantly (P < 0.05) and the highest Tg values of all samples were determined when the coating concentration was maximum (30%) and power level was minimum (5 W). The FTIR and XRD results indicate that the power of the ultrasonic nozzle did not cause any change in WPI structure and led to only a small change in the structure of HI-CAP 100 at 10 W. The short atomization time preserved, to some extent, the properties of the coating materials and the blueberry extract. With regard to the morphological properties, it was observed that the samples obtained with WPI showed less shrinkage than HI-CAP 100. CONCLUSION: The results indicated that an ultrasonic nozzle could be used successfully to prepare the blueberry microcapsule with HI-CAP 100 and WPI as coating materials. This study may contribute to the development of ultrasonic nozzle applications using different coatings for the microencapsulation of high-quality functional materials. © 2020 Society of Chemical Industry.

Cerebellopontine Angle Surgery Assisted by Continuous Mapping of the Facial Nerve Via the Ultrasonic Aspirator.

BACKGROUND: Cerebellopontine angle (CPA) surgery carries the risk of lesioning the facial nerve. The goal of preserving the integrity of the facial nerve is usually pursued with intermittent electrical stimulation using a handheld probe that is alternated with the resection. We report our experience with continuous electrical stimulation delivered via the ultrasonic aspirator (UA) used for the resection of a series of vestibular schwannomas. METHODS: A total of 17 patients with vestibular schwannomas, operated on between 2010 and 2018, were included in this study. A constant-current stimulator was coupled to the UA used for the resection, delivering square-wave pulses throughout the resection. The muscle responses from upper and lower face muscles triggered by the electrical stimulation were displayed continuously on multichannel neurophysiologic equipment. The careful titration of the electrical stimulation delivered through the UA while tapering the current intensity with the progression of the resection was used as the main strategy. RESULTS: All operations were performed successfully, and facial nerve conduction was maintained in all patients except one, in whom a permanent lesion of the facial nerve followed a miscommunication to the neurosurgeon. CONCLUSION: The coupling of the electrical stimulation to the UA provided the neurosurgeon with an efficient and cost-effective tool and allowed a safe resection. Positive responses were obtained from the facial muscles with low current intensity (lowest intensity: 0.1 mA). The availability of a resection tool paired with a stimulator allowed the surgeon to improve the surgical workflow because fewer interruptions were necessary to stimulate the facial nerve via a handheld probe.

Ultrasonic and osmotic pretreatments followed by convective and vacuum drying of papaya slices.

BACKGROUND: Papaya fruit is highly nutritive, but very fragile, and thus has a limited shelf life. Drying is essential to preserve it for longer durations. In this work, osmotic dehydration (OD) with and without ultrasound (US) was applied to papaya slices as a pretreatment in conjugation with vacuum (VD) and convective air drying (AD). Drying was carried out in a novel dryer. Moisture content, drying time, water activity, total color change, total phenolic content, radical scavenging activity, texture, and Fourier-transform infrared (FTIR) spectrums were evaluated for fresh and dried papaya slices. RESULTS: It was observed that US-assisted osmotic dehydration (USOD) followed by VD had the lowest drying time with highest retention of phenols and antioxidants as compared to other drying techniques. Higher phenols and antioxidants in US-pretreated samples were attributed to the release of trapped intra-cellular polyphenols by cavitation. However, the color characteristics and texture of OD pretreatment followed by convective AD slices were found to be better. Color retention could be due to carotenoid preservation, which would be degraded in other treatments, whereas lower brittleness was associated with lower pectin. Infrared spectroscopy confirmed the retention of phytochemicals and antioxidants in dried papaya slices that were subjected to pretreatment. CONCLUSION: Pretreatment before drying enhances the end product quality of dried papaya slices. The results of this study highlight that USOD-VD is effective for nutrition preservation while OD-AD is suitable for preserving physical characteristics. © 2020 Society of Chemical Industry.