ABSTRACT
Beeswaxes are used as a coating agent or as a wrapping material for food products making them potentially ingested by consumers. There is no regulation yet in Europe giving maximum levels of contaminants in this type of product. Nevertheless, being a natural product, they are exposed to environmental pollution, thus it appears necessary to establish their contamination rate in order to evaluate potential human exposure. In this study, a method of extraction of different environmental contaminants including pesticides, phthalates, PAHs and phenols was developed. Based on a hot Soxhlet extraction, followed by cleaning steps, the method was validated for the quantitation of the cited contaminants by LC-MS/MS and GC-(MS)/MS. Three different types of waxes were analyzed including typical white waxes (Cera Alba) and yellow waxes (Cera Flava). It was shown that all waxes had the presence of at least one contaminant and that phthalates, in particular DEHP, was present in all beeswax samples. Insecticides were found in majority among all the classes of pesticides screened. The yellow waxes were found to be contaminated with the highest rates of PAHs (60%), pesticides (75%) and phenols (40%). The detection frequency of PAHs, in contrast to phthalates, was the lowest for all the types of waxes combined.
Subject(s)
Gas Chromatography-Mass Spectrometry , Tandem Mass Spectrometry , Waxes , Waxes/analysis , Waxes/chemistry , Tandem Mass Spectrometry/methods , Gas Chromatography-Mass Spectrometry/methods , Reproducibility of Results , Environmental Pollutants/analysis , Chromatography, Liquid/methods , Polycyclic Aromatic Hydrocarbons/analysis , Limit of Detection , Phenols/analysis , Pesticides/analysis , Phthalic Acids/analysis , Linear ModelsABSTRACT
The unique properties of per- and polyfluoroalkyl substances (PFAS) have led to their extensive use in consumer products, including ski wax. Based on the risks associated with PFAS, and to align with PFAS regulations, the international ski federation (FIS) implemented a ban on products containing "C8 fluorocarbons/perfluorooctanoate (PFOA)" at all FIS events from the 2021/2022 season, leading manufactures to shift their formulations towards short-chain PFAS chemistries. To date, most studies characterising PFAS in ski waxes have measured a suite of individual substances using targeted analytical approaches. However, the fraction of total fluorine (TF) in the wax accounted for by these substances remains unclear. In this study, we sought to address this question by applying a multi-platform, fluorine mass balance approach to a total of 10 commercially available ski wax products. Analysis of TF by combustion ion chromatography (CIC) revealed concentrations of 1040-51700 µg F g-1 for the different fluorinated waxes. In comparison, extractable organic fluorine (EOF) determined in methanol extracts by CIC (and later confirmed by inductively-coupled plasma-mass spectrometry and 19F- nuclear magnetic resonance spectroscopy) ranged from 92 to 3160 µg g-1, accounting for only 3-8.8 % of total fluorine (TF). Further characterisation of extracts by cyclic ion mobility-mass spectrometry (IMS) revealed 15 individual PFAS with perfluoroalkyl carboxylic acid concentrations up to 33 µg F g-1, and 3 products exceeding the regulatory limit for PFOA (0.025 µg g-1) by a factor of up to 100. The sum of all PFAS accounted for only 0.01-1.0 % of EOF, implying a high percentage of unidentified PFAS, thus, pyrolysis gas chromatography-mass spectrometry was used to provide evidence of the nature of the non-extractable fluorine present in the ski wax products.
Subject(s)
Fluorine , Fluorocarbons , Waxes , Fluorocarbons/analysis , Fluorocarbons/chemistry , Fluorine/analysis , Fluorine/chemistry , Waxes/chemistry , Waxes/analysis , Caprylates/analysis , Caprylates/chemistryABSTRACT
Argentina is a leading honey producer and honey bees are also critical for pollination services and wild plants. At the same time, it is a major crop producer with significant use of insecticides, posing risks to bees. Therefore, the presence of the highly toxic insecticide chlorpyrifos, and forbidden contaminants (organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs)) was investigated in honey bee, beebread, wax and honey samples in apiaries from three contrasting regions of Argentina. Chlorpyrifos was detected in all samples with higher levels during period 1 (spring) in contrast to period 2 (fall), agreeing with its season-wise use in different crops, reaching 3.05 ng/g in honey bees. A subsequent first-tier pesticide hazard analysis revealed that it was relevant to honey bee health, mainly due to the high concentrations found in wax samples from two sites, reaching 132.4 ng/g. In addition, wax was found to be the most contaminated matrix with a prevalence of OCPs (∑OCPs 58.23-172.99 ng/g). Beebread samples showed the highest concentrations and diversity of pesticide residues during period 1 (higher temperatures). A predominance of the endosulfan group was registered in most samples, consistent with its intensive past use, especially in Central Patagonia before its prohibition. Among the industrial compounds, lighter PCB congeners dominated, suggesting the importance of atmospheric transport. The spatio-temporal distribution of pesticides shows a congruence with the environmental characteristics of the areas where the fields are located (i.e., land use, type of productive activities and climatic conditions). Sustained monitoring of different pollutants in beekeeping matrices is recommended to characterize chemical risks, assess the health status of honey bee hives and the pollution levels of different agroecosystems. This knowledge will set a precedent for South America and be helpful for actions focused on the conservation of pollination services, apiculture and ecosystems in Argentina.
Subject(s)
Environmental Monitoring , Environmental Pollutants , Honey , Bees , Argentina , Animals , Honey/analysis , Environmental Pollutants/analysis , Polychlorinated Biphenyls/analysis , Waxes/analysis , Waxes/chemistry , Halogenated Diphenyl Ethers/analysis , Pesticides/analysis , Seasons , Chlorpyrifos/analysisABSTRACT
This is the first study on cuticular wax variability of Abies alba, A.×borisii-regis and A. cephalonica, using 18 native populations from the assumed hybrid zone in the Balkan Peninsula. Presence of 13 n-alkanes with chain-lengths ranging from C21 to C33 , one primary alcohol, two diterpenes, one triterpene and one sterol was determined in hexane extracts of 269 needle samples. The multivariate statistical analyses at the population level entirely failed in supporting circumscription of Balkan Abies taxa and therefore, in identifying hybrid populations. However, performed at the species level, these analyses revealed a certain tendency of differentiation between A. alba and A. cephalonica, while individuals of A.×borisii-regis were largely overlapped by the clouds of both parent species. Finally, the correlation analysis suggested that the observed variation of wax compounds was probably genetically conditioned and that it does not represent an adaptive response to various environmental factors.
Subject(s)
Abies , Plant Leaves , Humans , Plant Leaves/chemistry , Balkan Peninsula , Waxes/analysis , EthanolABSTRACT
Mancozeb, an antifungal typically used for the growth of fruits, has the characteristic of non-internal absorption, and has a risk of binding to the waxy components of fruits. This work investigated the interaction of pesticide molecules with the waxy layer on the grape surface and their effects on pesticide residues in grapes. The study observed significant changes in the compositions of the waxy layer on the grape surface after soaking in a mancozeb standard solution. The six substances-oleanolic acid, ursolic acid, lupeol, octacosanol, hexacosanal, and γ-sitosterol-with discernible content differences were chosen for molecular docking. Docking results were further visualized by an independent gradient model based on Hirshfeld partition (IGMH). Hydrogen bonds and van der Waals forces were found between mancozeb and the six waxy components. Moreover, the negative matrix effects caused by the presence or absence of wax for the determination of mancozeb were different through the QuEChERS-HPLC-MS method. Compared with the residue of mancozeb in grapes (5.97 mg/kg), the deposition of mancozeb in grapes after dewaxing was significantly lower (1.12 mg/kg), which further supports that mancozeb may interact with the wax layer compositions. This work not only provides insights into the study of the interaction between pesticides and small molecules but also provides theoretical guidelines for the investigation of the removal of pesticide residues on the surface of fruits.
Subject(s)
Pesticide Residues , Pesticides , Vitis , Vitis/chemistry , Pesticide Residues/analysis , Waxes/analysis , Molecular Docking Simulation , Pesticides/analysis , FruitABSTRACT
We aimed to test a set of epidermal traits in two legume species with contrasting chemical, physical, and micromorphological leaf-surface features to assess which ones would determine higher PM retention. For that, we performed a biomonitoring study in southeastern Brazil at the Steel Valley Metropolitan Region, where there is predominance of steel industry and one of the largest vehicle fleets in the country. A reference station was installed at a neighboring park. We evaluated leaf-surface roughness at two hierarchical levels, leaf wettability, epidermal-cell anticlinal-wall undulation, epidermal-cell perimeter, and the micromorphology and chemical composition of epicuticular waxes. Particle retention was significantly higher in Paubrasilia echinata than in Libidibia ferrea var. leiostachya, the former of which has lower roughness given by both the epidermal tissue (macro-roughness; 0.6 vs 2.6 µm) and epicuticular waxes (micro-roughness; 68 vs 220 nm), higher leaf wettability (82° vs 143°), lower epidermal-cell undulation index (1.2 vs 1.8), lower epidermal-cell perimeter (93 vs 146 µm), wax deposition in the form of a smooth layer (as opposed to densely aggregated rosettes of vertical platelets), and more polar wax chemical constitution (68% vs 47% of polar compounds). While all of the assessed traits contributed to particle retention, canonical loadings revealed that macro-roughness was the trait that contributed the most to the retention of PM2.5 (ca = 1.47; r = -0.56), PM10 (ca = 1.08; r = -0.61), PM100 (ca = -4.95; r = -0.39) and TSP (ca = 0.98; r = -0.62), although this trait was shown by factor analysis to be secondary in distinguishing between species (0.92 contribution to the second axis). Our findings shed new light on the criteria that should be considered when selecting species for green infrastructure aiming to reduce urban air pollution, as well as on novel possibilities for PM biomonitoring in the tropics.
Subject(s)
Air Pollution , Fabaceae , Adsorption , Plant Leaves/chemistry , Waxes/analysisABSTRACT
Reducing the quantity of wax in lipstick can improve the properties of the lipstick, including the glossiness, moisturizing capability, and longevity. However, lipsticks with less wax tend to break more easily. Therefore, to prevent breakage while reducing the wax content, we focused on the crystal structure of the wax gel and strain generated during the cooling and solidification processes as they are structural factors that affect fragility. Generally, if the crystals and strain are small, the structure is less easily broken. However, because the tip of the lipstick cools more rapidly from below than the root, the strain of the root against the tip increases owing to poor heat transmission. This creates large shrink holes in the root. While reheating from above can suppress the generation of shrink holes, it also causes the crystals to grow larger and the structure to become weak owing to slow cooling. Therefore, we adopted a rubber-molding technology generally used to form logos and complicated shapes as a strategy to mitigate these issues. This successfully reduced the strain generated inside the lipstick during the cooling process, as the rubber mold shrunk along with the lipstick, making it possible to quench the root. Therefore, we were able to realize a small crystal structure and low strain on the root of the lipstick. Our results demonstrate that it is possible to realize a lipstick with excellent features by reducing the quantity of wax.
Subject(s)
Chemical Industry/methods , Cosmetics/chemistry , Lip , Rubber , Technology/methods , Waxes/analysis , Waxes/chemistry , Chemical Phenomena , Crystallization , GelsABSTRACT
Beeswax is intended for use in the beekeeping sector but also in the agro-food, pharmaceutical or cosmetics sectors. The adulteration of beeswax is an emerging issue that was reported lately at several occasions in the scientific literature. This issue tends to become more frequent and global, but its exact extent is not accurately defined. The present study aims to assess the current situation in Belgium through a nationwide survey. Randomized beeswax samples originating from Belgian beekeepers (N = 98) and commercial suppliers (N = 9) were analysed with a Fourier transform infrared spectroscopy (FTIR) coupled with Attenuated Total Reflectance (ATR) accessory (FTIR-ATR spectroscopy) for adulteration. The survey revealed a frequency of 9.2% and 33.3% of adulteration in beekeepers beeswax samples (9 samples out of 98: 2 with paraffin and 7 with stearin/stearic acid) and commercial beeswax samples (3 samples out of 9: all adulterated with stearin/stearic acid), respectively. The analysed samples were adulterated with various percentages of paraffin (12 to 78.8%) and stearin/stearic acid (1.2 to 20.8%). This survey indicates that in the beekeepers samples, beeswax adulteration was more frequent in comb foundation and crude beeswax than in comb wax. With the example of this nationwide survey conducted in Belgium, this study shows the emergence of the issue and the urgent need for action to safeguard the health of both honey bees health and humans, in particular with the setting of a proper regulation legal framework and a specific routine analytical testing of commercial beeswax to ensure beeswax quality.
Subject(s)
Bees/metabolism , Waxes/analysis , Animals , Belgium , Drug Contamination , Paraffin/chemistry , Spectroscopy, Fourier Transform Infrared , Stearic Acids/chemistryABSTRACT
Bees and their products are useful bioindicators of anthropogenic activities and could overcome the deficiencies of air quality networks. Among the environmental contaminants, mercury (Hg) is a toxic metal that can accumulate in living organisms. The first aim of this study was to develop a simple analytical method to determine Hg in small mass samples of bees and beehive products by cold vapor atomic fluorescence spectrometry. The proposed method was optimized for about 0.02 g bee, pollen, propolis, and royal jelly, 0.05 g beeswax and honey, or 0.1 g honeydew with 0.5 mL HCl, 0.2 mL HNO3, and 0.1 mL H2O2 in a water bath (95 °C, 30 min); samples were made up to a final volume of 5 mL deionized water. The method limits sample manipulation and the reagent mixture volume used. Detection limits were lower than 3 µg kg-1 for a sample mass of 0.02 g, and recoveries and precision were within 20% of the expected value and less than 10%, respectively, for many matrices. The second aim of the present study was to evaluate the proposed method's performances on real samples collected in six areas of the Lazio region in Italy.
Subject(s)
Bees/chemistry , Biological Monitoring/methods , Mercury/analysis , Spectrometry, Fluorescence/methods , Animals , Cold Temperature , Cucumis melo/chemistry , Data Accuracy , Environmental Pollution/analysis , Fatty Acids/analysis , Honey/analysis , Italy , Pollen/chemistry , Propolis/analysis , Spectrophotometry, Atomic/methods , Waxes/analysisABSTRACT
Bee products are a well-known remedy against numerous diseases. However, from the consumers' perspective, it is essential to define factors that can affect their sensory acceptance. This investigation aimed to evaluate the volatile and sensory profiles, and sugar composition of beeswax, beebread, pollen, and honey. According to the HS-SPME/GC-MS results, 20 volatiles were identified in beeswax and honey, then 32 in beebread, and 33 in pollen. Alkanes were found to dominate in beeswax, beebread, and pollen, while aldehydes and monoterpenes in honey. In the case of sugars, a higher content of fructose was determined in beebread, bee pollen, and honey, whereas the highest content of glucose was assayed in beeswax. In the QDA, the highest aroma intensity characterized as honey-like and sweet was found in honey, while the acid aroma was typical of beebread. Other odor descriptors, including waxy, pungent, and plant-based aromas were noted only in beeswax, honey, and pollen, respectively.
Subject(s)
Honey/analysis , Propolis/analysis , Sugars/isolation & purification , Volatile Organic Compounds/isolation & purification , Waxes/analysis , Aldehydes/isolation & purification , Alkanes/isolation & purification , Animals , Bees , Gas Chromatography-Mass Spectrometry , Monoterpenes/isolation & purificationABSTRACT
Extracellular lipids of plants can be analyzed using gas chromatography and mass spectrometry. Soluble waxes are extracted with chloroform and thus separated from the extracellular polymers cutin and suberin. Cutin and suberin have to be depolymerized using boron trifluoride-methanol or methanolic HCl before analysis. The released monomeric hydroxylated fatty acids are then extracted with chloroform or hexane. Prior to gas chromatography, all free polar functional groups (alcohols and carboxylic acids) are derivatized by trimethylsilylation. Internal standards, that is, long chain alkanes, are used for the quantification of wax molecules and cutin or suberin monomers. Lipids are quantified using gas chromatography coupled to flame ionization detection. Qualitative analysis is carried out by gas chromatography coupled to mass spectrometry. Thus, all wax molecules of chain lengths from C16 to C60 and different substance classes (fatty acids, alcohols, esters, aldehydes, alkanes, etc.) or all cutin or suberin monomers of chain lengths from C16 to C32 and different substance classes (hydroxylated fatty acids, diacids, etc.) can be analyzed from one sample.
Subject(s)
Cell Wall/chemistry , Gas Chromatography-Mass Spectrometry/methods , Membrane Lipids/analysis , Esters/analysis , Fatty Acids/analysis , Fruit/chemistry , Lipids/analysis , Membrane Lipids/chemistry , Plant Leaves/chemistry , Plant Roots/chemistry , Plants/chemistry , Seeds/chemistry , Waxes/analysisABSTRACT
Overhead spray washing and waxing systems (WWS) are used commercially to reduce the risk of microbial contamination and improve the quality of fresh produce during packing. This study evaluated the microbiological quality of overhead spray water and spent peach wash water, as well as fresh peaches before and after they pass the WWS. Pre- and post-washed/waxed peach samples (n = 192) and overhead spray water and spent peach wash water samples (n = 54) were collected several times over the course of a processing day in three packing facilities located in the state of Georgia. Populations of total aerobes (TA), yeasts and molds (YM), and coliforms (TC) and the presence of thermotolerant coliforms (TTC) and enterococci (EC) were measured in collected samples. The average TA and TC counts and the incidences of TTC and EC were significantly higher (P < 0.05) on peach samples collected after the WWS compared to those collected before the WWS. Counts and incidences of TA, YM, and TC in spent peach wash water were significantly higher than in the overhead spray water where neither TTC nor EC was detected. Results suggest that the commercial washing and waxing systems had little effect in improving the microbiological quality of fresh peaches.
Subject(s)
Bacteria/growth & development , Food Handling/methods , Fungi/growth & development , Prunus persica/microbiology , Bacteria/classification , Bacteria/genetics , Bacteria/isolation & purification , Food Contamination/analysis , Food Contamination/prevention & control , Food Microbiology , Fruit/microbiology , Fungi/classification , Fungi/genetics , Fungi/isolation & purification , Water/analysis , Waxes/analysisABSTRACT
The grapevine berry surface is covered by a cuticle consisting of cutin and various lipophilic wax compounds. The latter build the main barrier for transpirational water loss and protect the fruit against environmental factors e.g. pests, mechanical impacts or radiation. The integrety of the fruit surface is one important key factor for post-harvest quality and storage of fruits. Nonetheless, the developmental pattern of cuticular wax was so far only investigated for a very limited number of fruits. Therefore, we performed comparative investigations on the compositional and morphological nature of epicuticular wax crystals and underlying wax during fruit development in Vitis vinifera. The main compound oleanolic acid belongs to the pentacyclic triterpenoids, which occur very early in the development in high amounts inside the cuticle. The amount increases until veraison and decreases further during ripening. In general, very-long chain aliphatic (VLCA) compounds are present in much smaller amounts and alcohols and aldehydes follow the same trend during development. In contrast, the amount of fatty acids constantly increases from fruit set to ripening while wax esters only occur in significant amount at veraison and increase further. Wax crystals at the fruit surface are solely composed of VLCAs and the morphology changes during development according to the compositional changes of the VLCA wax compounds. The remarkable compositional differences between epicuticular wax crystals and the underlying wax are important to understand in terms of studying grape-pest interactions or the influence of environmental factors, since only wax crystals directly face the environment.
Subject(s)
Fruit/growth & development , Vitis/metabolism , Waxes/chemistry , Fatty Acids/analysis , Fruit/metabolism , Membrane Lipids/metabolism , Oleanolic Acid/analysis , Plant Transpiration/physiology , Vitis/growth & development , Waxes/analysis , Waxes/metabolismABSTRACT
In this study, a tea polyphenol (TP) loaded beeswax gelator (TP gelator) was constructed and incorporated into soybean oil to improve the oxidative stability of oleogels. The effects of TP on the structure and storage stability of oleogels were investigated. The TP gelator prepared by embedding TP into beeswax improved the dispersity of TP in lipids. The thermal characteristics and X-ray diffraction analysis showed that the components of the TP gelator coexisted homogeneously and TP was well dispersed in beeswax. The Fourier-transform infrared spectra indicated that the phenolic hydroxyl group of TP had intermolecular force with the quaternary ammonium nitrogen in the choline portion of soybean lecithin. The formation of needle-like crystals by beeswax restricted the flow of liquid oil, and TP did not participate in the construction of the internal network structure of the oleogel. In the accelerated storage experiment at 60 °C, the peroxide value of the TP loaded oleogel decreased by 60.6% at the end of the storage period compared with soybean oil. TP was successfully embedded in the oleogel without changing its structure, which not only solved the problem of poor dispersion of TP in oil, but also showed a significant inhibitory effect on lipid oxidation.
Subject(s)
Polyphenols , Tea/chemistry , Waxes , Chemical Phenomena , Organic Chemicals/analysis , Organic Chemicals/chemistry , Oxidation-Reduction , Polyphenols/analysis , Polyphenols/chemistry , Waxes/analysis , Waxes/chemistryABSTRACT
RATIONALE: Mummification is one of the defining customs of ancient Egypt. The nuances of the embalming procedure and the composition of the embalming mixtures have attracted the attention of scientists and laypeople for a long time. Modern analytical tools make mummy studies more efficient. METHODS: Comprehensive two-dimensional gas chromatography-high resolution mass spectrometry (GCxGC/HRMS) with complementary ionization methods (electron ionization, positive chemical ionization, and electron capture negative ionization [ECNI]) with a Pegasus GC-HRT+4D instrument was used to identify embalming components in the mummy from the Pushkin Museum of Fine Arts acquired in 1913 in London at the de Rustafjaell sale. The mummy dates back to the late Predynastic period (direct accelerator mass spectrometry-dating 3356-3098 bc), being one of the oldest in the world. RESULTS: The results showed the complexity of the embalming mixtures that were already in use 5000 years ago. Several hundred organic compounds were identified in the mummy samples. Various types of hydrocarbons (triterpanes, steranes, isoprenoid, and polycyclic aromatic hydrocarbons) prove the presence of petroleum products. Iodinated compounds detected using ECNI define oils of marine origin, whereas esters of palmitic acid indicate the use of beeswax. The nature of the discovered components of conifer tar proves that the preliminary processing of conifer resins involved heating. GCxGC/HRMS also allowed a number of modern contaminants (phthalates, organophosphates, and even DDT) to be identified. CONCLUSIONS: Application of a powerful GCxGC/HRMS technique with complementary ionization methods allowed significant widening of the range of organic compounds used for mummification that could be identified. The complexity of the embalming mixtures supports the hypothesis of the high social status of the child made on the basis of the preliminary study of the mummy.
Subject(s)
Embalming , Gas Chromatography-Mass Spectrometry/methods , Mummies , Egypt , Fatty Acids/analysis , Fatty Acids/chemistry , Hydrocarbons/analysis , Hydrocarbons/chemistry , Palmitic Acid/analysis , Petroleum , Polycyclic Aromatic Hydrocarbons/analysis , Polycyclic Aromatic Hydrocarbons/chemistry , Sterols/analysis , Sterols/chemistry , Waxes/analysis , Waxes/chemistryABSTRACT
Oleocellosis is a physiological disorder causing blemishes on fruit surface. This study investigated the influence of oleocellosis on the membrane fatty acids and wax in lemon fruit rinds at the morphological, physiological, metabolic and molecular levels by using a variety with a high incidence rate of oleocellosis (green lemon). Oleocellosis-damaged rinds showed loose and flaky wax layers with more fissures on the surface, as well as higher contents of C16 and C18 fatty acids and very long chain (VLC) fatty alkanes while lower contents of VLC fatty aldehydes. The main differentially expressed genes, including FabZ, FAD2 and SAD6 involved in the accumulation of C16 and C18 fatty acids and CER1 involved in the transformation of VLC fatty aldehydes to VLC fatty alkanes, were up-regulated by oleocellosis. These results indicate that oleocellosis accelerates the accumulation of membrane free fatty acids and transformation of VLC fatty aldehydes to VLC fatty alkanes.
Subject(s)
Citrus/metabolism , Fatty Acids/metabolism , Waxes/metabolism , Alkanes/metabolism , Citrus/genetics , Fatty Acid Desaturases/genetics , Fatty Acid Desaturases/metabolism , Fatty Acids/analysis , Fruit/anatomy & histology , Fruit/metabolism , Gas Chromatography-Mass Spectrometry , Gene Expression Regulation, Plant , Plant Proteins/genetics , Plant Proteins/metabolism , Principal Component Analysis , Waxes/analysis , Waxes/chemistryABSTRACT
The aim of this paper is to establish a protocol by solid-phase extraction-gas chromatography-mass spectrometry leading to a wide and fine qualitative chemical characterization of the several natural substances present in human mummies' balms, using a minimal quantity of samples. In this study, nine samples were analyzed from mummies dating back from the Third Intermediate Period to the Roman Period, and were provided by the Confluences Museum (Lyon, France). Using solid-phase extraction, three fractions were examined in this protocol. The first one, eluted with hexane, concerned chemical families of hydrocarbons of bitumen. The second, eluted with ethanol, enabled terpenic compounds to be characterized and beeswax. The last one, composed of diethyl ether with 2% acetic acid, extracted carboxylic acids with a long aliphatic chain (fatty matter) and glycerides. This study also allowed the characterization of non-saponified compounds from beeswax to be obtained while excluding the common saponification step. The analyzed mummification balms were shown to contain fatty matter, beeswax, bitumen, and diterpenic resinous material. This one-pot solid-phase extraction-gas chromatography-mass spectrometry method was efficient in reducing both the number of analytical steps and the complexity of the archaeological balms subsequently analyzed by gas chromatography-mass spectrometry.
Subject(s)
Composite Resins/analysis , Fats/analysis , Hydrocarbons/analysis , Mummies , Solid Phase Extraction , Waxes/analysis , Egypt , Gas Chromatography-Mass Spectrometry , HumansABSTRACT
Many recently published papers have investigated the spatial and temporal manifestation of the 4.2 ka BP climate event at regional and global scales. However, questions with regard to the potential drivers of the associated climate change remain open. Here, we investigate the interaction between Atlantic and Mediterranean climate forcing on the south-eastern Iberian Peninsula during the mid- to late Holocene using compound-specific hydrogen isotopes from fossil leaf waxes preserved in marine sediments. Variability of hydrogen isotope values in the study area is primarily related to changes in the precipitation source and indicates three phases of increased Mediterranean sourced precipitation from 5450 to 5350 cal. BP, from 5150 to 4300 cal. BP including a short-term interruption around 4800 cal. BP, and from 3400 to 3000 cal. BP interrupted around 3200 cal. BP. These phases are in good agreement with times of prevailing positive modes of the North Atlantic Oscillation (NAO) and reduced storm activity in the Western Mediterranean suggesting that the NAO was the dominant modulator of relative variability in precipitation sources. However, as previously suggested other modes such as the Western Mediterranean Oscillation (WeMO) may have altered this overall relationship. In this regard, a decrease in Mediterranean moisture source coincident with a rapid reduction in warm season precipitation during the 4.2 ka BP event at the south-eastern Iberian Peninsula might have been related to negative WeMO conditions.
Subject(s)
Carbon Radioisotopes/analysis , Climate Change/history , Fossils , Hydrogen/analysis , Plant Leaves/chemistry , Europe , Gas Chromatography-Mass Spectrometry , Geologic Sediments , History, Ancient , Seasons , Spatio-Temporal Analysis , Waxes/analysisABSTRACT
The aim of this study was to examine the physical properties of margarines prepared from oleogels with binary mixtures of candelilla wax (CDW) and beeswax (BW) in soybean oil. Some of the margarines made from oleogels with mixtures of CDW and BW had higher firmness than those made with one wax. For example, a 3% wax margarine made with 25% CDW and 75% BW had significantly higher firmness (0.97 N) than those with 100% CDW (0.59 N) and with 100% BW (0.11 N). Differential scanning calorimetry (DSC) and solid fat content (SFC) analyses revealed eutectic melting properties for binary wax margarines, which may be desirable since wax oleogel-based margarines often have higher melting points than conventional margarines. For example, the major melting point of 3% wax margarine made with 50% CDW and 50% BW was 43.85 °C, while for margarines made with 100% CDW or 100% BW, the melting points were at 46.00% and 47.61 °C, respectively. SFC was lowest for margarines with 50 or 75% BW; for example, 3% wax margarine with 25% CDW and 75% BW had 0.72% SFC at 40 °C while those with 100% CDW and 100% BW had 1.19 and 1.13% SFC, respectively. However, dropping point constantly decreased with increasing BW ratios. This study demonstrated that by mixing two waxes, the firmness of oleogel-based margarines could be increased, and the melting point could be tailored by the ratio of two waxes. PRACTICAL APPLICATION: This study demonstrated that firmness and melting properties of margarines prepared from wax-oleogels can be improved by mixing two waxes, making their practical application more feasible. Firmness of margarines prepared with oleogels of binary mixtures of candelilla wax and beeswax were higher than those with pure waxes. The melting point of wax oleogel-based margarines was decreased by use of binary mixtures of candelilla wax and beeswax.
Subject(s)
Margarine/analysis , Soybean Oil/chemistry , Waxes/analysis , Animals , Ascomycota/chemistry , Bees , Food Additives/analysis , Food Handling , Organic Chemicals/analysisABSTRACT
RATIONALE: Plant lipid biomarkers, such as plant waxes and terpenoids, and the stable isotopic composition of bulk leaves are widely used in both modern and paleoclimate studies for tracking vegetation and climate. However, the effects of different drying methods on the preservation of plant lipid biomarkers and the stable isotopic compositions of leaves are less explored. Here, we investigated various drying methods for the measurement of plant lipid concentrations and bulk leaf isotopic compositions. METHODS: Leaves from four tree species (Acer rubrum, Pinus sylvestris, Platanus occidentalis, and Taxodium distichum) were collected and dried using air, an oven, a freeze-dryer, and a microwave. We compared concentrations of leaf waxes and terpenoids and carbon (δ13 C) and nitrogen (δ15 N) isotopic compositions of leaves by different drying methods. RESULTS: The air, oven, freeze-dryer, and microwave drying methods did not affect lipid concentrations significantly, and only a few homologues differed (38.1% or 41.8 µg/g on average) possibly due to biological variations or enhanced extraction efficiencies. The δ13 C values were not affected by drying methods, whereas the δ15 N values in oven-dried leaves in some species were higher by 0.2-0.7 than those obtained by other methods. Though small, we attribute these patterns to loss of leaf compounds with lower isotope ratios during oven-drying. CONCLUSIONS: Based on our results, each drying technique yielded equivalent results for all plant wax and terpenoid concentrations and bulk leaf δ13 C values; however, oven-drying modified the δ15 N values.