RESUMO
Five 2-phenylacetohydrazide derivatives (BPAH = N'-benzylidene-2-phenylacetohydrazide, HBPAH = N'-(2-hydroxybenzylidene)-2-phenylacetohydrazide), PPAH = 2-phenyl-N'-3-phenylallylideneacetohydrazide, FMPAH = N'-(furan-2-ylmethylene)-2-phenylaceto hydrazide and EPAH = N'-ethylidene-2-phenylacetohydrazide were synthesized by the condensation of 2-phenylacetohydrazide with the corresponding aldehyde. The synthesized compounds were characterized by FTIR, 1D, and 2D NMR spectroscopy. The structure of the BPAH and PPAH were analyzed by single crystal X-ray diffraction analysis and in both crystallized compounds, the molecules adopted trans geometry around the -C[bond, double bond]N- (imine) functional group. To explore the pharmacological significance of these compounds, the binding ability of these compounds with Bovine Serum Albumin (BSA) was investigated using fluorescence spectroscopy. BPAH and PPAH showed the highest binding ability while EPAH, HBPAH, and FMPAH had lower binding ability to BSA molecules. Thermodynamic parameters ΔG, ΔH°, and ΔS° demonstrated that interactions of BSA with compounds BPAH, EPAH, FMAH, and HBPAH were exothermic while for PPAH it was endothermic. The negative enthalpy and entropy of the compounds BPAH, EPAH, FMAH, and HBPAH indicated that van der Waals' forces and hydrogen bonding played a major role in stabilizing the BSA binding with the molecules. Hydrophobic interactions were predominant in the binding of PPAH with BSA tends to interact with two sets of BSA binding sites with an increase in temperature.
RESUMO
Despite the high global prevalence, rheumatoid arthritis lacks a satisfactory treatment. Hence, the present study is undertaken to design and synthesize novel anti-inflammatory compounds. For this, quinoline and anthranilic acid, two medicinally-privileged moieties, were linked by pharmacophore hybridization, and following their computational assessments, three hybrids 5a-c were synthesized in good over all yields. The in vitro and in vivo anti-inflammatory potential of these hybrids was determined by anti-denaturation and anti-proteinase, and carrageenan-induced paw edema models. The computational studies of these hybrids revealed their drug-likeness, optimum pharmacokinetics, and less toxicity. Moreover, they demonstrated high binding affinity (-9.4 to -10.6 kcal mol-1) and suitable binding interactions for TNF-α, FLAP, and COX-II. A three-step synthetic route resulted in the hybrids 5a-c with 83-86% yield of final step. At 50 µg mL-1, the antiprotease and anti-denaturation activity of compound 5b was significantly higher than 5a and 5c. Furthermore, 5b significantly reduced the edema in the right paw of the rats that received carrageenan. The results of this study indicate the medicinal worth of the novel hybrids in treating inflammatory disorders such as rheumatoid arthritis.
Assuntos
Desenho de Fármacos , Edema , Simulação de Acoplamento Molecular , Quinolinas , ortoaminobenzoatos , Quinolinas/química , Quinolinas/farmacologia , Quinolinas/síntese química , Animais , Edema/tratamento farmacológico , Edema/induzido quimicamente , ortoaminobenzoatos/química , ortoaminobenzoatos/farmacologia , ortoaminobenzoatos/síntese química , Ratos , Carragenina , Masculino , Anti-Inflamatórios/farmacologia , Anti-Inflamatórios/química , Anti-Inflamatórios/síntese química , Estrutura Molecular , Ratos Wistar , Anti-Inflamatórios não Esteroides/química , Anti-Inflamatórios não Esteroides/farmacologia , Anti-Inflamatórios não Esteroides/síntese química , Relação Dose-Resposta a Droga , Relação Estrutura-Atividade , Ciclo-Oxigenase 2/metabolismo , Ciclo-Oxigenase 2/químicaRESUMO
Deoxyribonucleic acid (DNA) acts as the most important intracellular target for various drugs. Exploring the DNA binding interactions of small bioactive molecules offers a structural guideline for designing new drugs with higher clinical efficacy and enhanced selectivity. This study presents the facile synthesis of pyrazoline-derived compounds (4a)-(4f) by reacting substituted chalcones with hydrazine hydrate using formic acid. The structure elucidation of substituted pyrazoline compounds was carried out using 1H-NMR, FT-IR and elemental analyses. While the crystal structures of two compounds (4a) and (4b) have been resolved by single-crystal X-ray diffraction (SC-XRD) analysis. Hirshfeld surface analysis also endorsed their greater molecular stability. Computational calculations at DFT/B3LYP/6-311++G(d,p) were executed to compare the structural properties (bond angle and bond length) and explore reactivity descriptors, frontier molecular orbitals (FMO), Mulliken atomic charges (MAC), molecular electrostatic potential (MEP) and electronic properties. All the compounds were evaluated for DNA binding interactions by UV-Vis spectrophotometric analysis. The results revealed that compounds (4a)-(4f) bind to DNA via non-covalent binding mode having binding constant values ranging from 1.22 × 103 to 6.81 × 104 M-1. The negative values of Gibbs free energy also proved the interaction of studied compounds with DNA as a spontaneous process. The findings of molecular docking simulations depicted that these studied compounds showed significant binding interactions with DNA and these results were consistent with experimental findings. Compound (4b) was concluded as the most potent compound of the series with the highest binding constant (4.95 × 104) and strongest binding affinity (-8.48 kcal/mol).Communicated by Ramaswamy H. Sarma.
RESUMO
Currently, polymer organic solar cells (POSCs) are widely utilized due to their significant application, such as low-cost power conversion efficiencies (PCEs). Therefore, we designed a series of photovoltaic materials (D1, D2, D3, D5 and D7) by the incorporation of selenophene units (n = 1-7) as π1-spacers by considering the importance of POSCs. Density functional theory (DFT) calculations were accomplished at MPW1PW91/6-311G (d, p) functional to explore the impact of additional selenophene units on the photovoltaic behavior of the above-mentioned compounds. A comparative analysis was conducted for designed compounds and reference compounds (D1). Reduction in energy gaps (∆E = 2.399 - 2.064 eV) with broader absorption wavelength (λmax = 655.480 - 728.376 nm) in chloroform along with larger charge transference rate was studied with the addition of selenophene units as compared to D1. A significantly higher exciton dissociation rate was studied as lower values of binding energy (Eb = 0.508 - 0.362 eV) were noted in derivatives than in the reference (Eb = 0.526 eV). Moreover, transition density matrix (TDM) and density of state (DOS) data also supported the efficient charge transition origination from HOMOs to LUMOs. Open circuit voltage (Voc) was also calculated for all the aforesaid compounds to check the efficiency, and significant results were seen (1.633-1.549 V). All the analyses supported our compounds as efficient POSCs materials with significant efficacy. These compounds might encourage the experimental researchers to synthesize them due to proficient photovoltaic materials.
RESUMO
The potential of nanocomposite membranes (NCMs) prepared by the sodium alginate polymer and embedded with synthesized zeolitic imidazole framework-8 (ZIF-8) as fillers having microporous structure in the application of separation of gaseous mixture generated by the process of methane reforming was assessed. ZIF-8 crystals were created through hydrothermal synthesis, with sizes varying from 50 to 70 nm. NCMs were prepared with a 15% filler loading, i.e., synthesized ZIF-8. NCMs (ZIF-8) having H2 permeability of 28 Barrer and H2/CH4 selectivity of 125 outperformed neat polymer membranes in terms of separation performance at ambient temperature and 4 kg/cm2 pressure. The purity of H2 increased to as high as 95% among the measured values. The NCMs did not, however, outperform a neat polymer membrane in terms of their ability to separate mixtures of gases. Moreover, the combination of ZIF-8 as a filler with sodium alginate was new and had not been reported previously. As a result, it is worthwhile to investigate.
RESUMO
Chitosan-bounded copper (chitosan-Cu) was introduced for green synthesis of novel ferrocenated spiropyrrolidine hybrids, namely 3'-(4-.bromobenzoyl)-5'-(4-hydroxybenzyl)-4'-ferrocenylspiro[indoline-3,2'-pyrrolidin]-2-one and 3'-(4-bromobenzoyl)-4'-ferrocenylspiro[indoline-3,2'-pyrrolidin]-2-one, in good yield. A one-pot three-component 1,3-dipolar cycloaddition reaction was employed for the formation of spiropyrrolidines from 1-(4-bromophenyl)-ferrocene-prop-2-en-1-one and azomethine ylides, which were developed in situ from tyrosine, glycine, and isatin, respectively. Various spectroscopic methods were used to establish the structures of spiropyrrolidines, and a single crystal X-ray diffraction study of a spiropyrrolidine provided additional confirmation. The crystallographic study revealed that compound 3a has one independent molecule in its unit cell, which is correlated with Hirshfeld surface analysis, and describes intramolecular contacts adversely. The highly yielded products in green conditions were determined for their antibacterial significance and were found to have good activity against Gram-positive and Gram-negative bacterial strains.
RESUMO
Non-fullerene (NF)-based compounds have attracted much attention as compared to fullerene-based materials because of their promising optoelectronic properties, lower synthetic cost and greater stability. Usually, the end-capped groups have a promising impact in magnifying the nonlinear optical (NLO) characteristics in the non-fullerene molecules. Based on this, a series of new NLO active non-fullerene molecules (NFAD2-NFAD6) have been established. The non-fullerene molecules (NFAD2-NFAD6) were designed by end-capped modification in acceptor moieties of the reference (NFAR1), while donor and π-bridge moieties were kept the same in the entire series. Quantum chemistry-based calculations at the M06/6-311G(d,p) level were done to determine the NLO characteristics and for other supportive analyses. The acceptor and donor moieties were utilized at the opposite terminals of NFAD2-NFAD6, which proved to be an effective approach in tuning the FMO band gap. Overall the results of natural bond orbital (NBO), density of state (DOS) and transition density matrices (TDMs) analyses supported the NLO properties of the designed compounds. Among all the studied compounds, NFAD4 was proven to be the most suitable candidate due to its promising NLO properties, well supported by a lower bandgap of 1.519 eV and a maximum absorption wavelength of 999.550 nm. Therefore, NFAD4 was reported with greater amplitude of dipole polarizability (10.429 e.s.u), average polarizability (2.953 × 10-22 e.s.u), first hyperpolarizability (13.16 × 10-27 e.s.u.) and second hyperpolarizability (2.150 × 10-31 e.s.u.) than other derivatives and NFAR1. Subsequently, the present study depicted the significance of utilizing different non-fullerene (NF)-based acceptor moieties to achieve the promising NLO material. This computational study may lead towards new plausible pathways for researchers to design potent NLO substances for impending hi-tech applications.
RESUMO
The novel piperidinium dicoumarol has been synthesized by the reaction of 3-formylchromone, 4-hydroxycoumarin, and piperidine under chitosan catalyzed solvent-free green conditions. FT-IR and NMR spectroscopy established the structure of dicoumarol, which was further confirmed by a single X-ray diffraction study. The single diffraction study has revealed the hydrogen bonding interactions, which were further validated by Hirshfeld surface analysis. Geometry optimizations of dicoumarol have been performed at the DFT level of theory by the B3LYP acting along with Gaussian 16, revision B.01 to calculate the geometric and electronic structure parameters.
RESUMO
Herein, a series of non-fullerene-based substantial chromophores (FHD1-FHD6) with a D-π-A framework was designed from a synthesized non-fullerene compound (FH) via structural tailoring with various donor moieties. The FH and its designed derivatives were optimized with frequency analysis at the M06/6-311G (d,p) level to confirm their true minima on potential energy surfaces. These optimized geometries were utilized to perform further analyses, such as absorption, natural bonding orbital (NBO), frontier molecular orbital (FMO), and nonlinear orbital (NLO) analyses at the aforesaid level. Quantum chemical study revealed that all the designed chromophores exhibited a lower band gap than that of the parent molecule with the exception of FHD3. Furthermore, density of states (DOS) analysis supported the findings from the FMO study, and this agreement revealed that the efficient charge was transferred from the HOMO to the LUMO. The NBO investigations disclosed that all the compounds comprised donor moieties with positive charges and acceptors having negative charges. Interestingly, π-conjugated linkers were also found with positive charges, showing an effective donating property. These NBO findings explicated that FHD1-FHD6 exhibited an efficient push-pull mechanism. The λ max values of the designed chromophores were observed to be greater than the reference compound. The average polarizability ãαã, first hyperpolarizability (ß tot), and second hyperpolarizability ãγã values of FHD2 were found to be 2.170 × 10-22, 3.150 × 10-27, and 4.275 × 10-32 esu, respectively, while all the other derivatives had been reported in the relevant range. Efficient NLO data revealed that FH-based derivatives may contribute significantly toward NLO technology.
RESUMO
Fullerene-based organic compounds have been reported as useful materials with some limitations; nonetheless, fullerene-free compounds are primarily considered to be the most substantial materials for the development of modern technology. Therefore, in this study, a series of compounds (NFBC2-NFBC7) having an A-π-D architecture were designed for the first time from a synthesized nonfullerene (O-IDTBR) compound by changing different acceptor groups. The synthesized nonfullerene (O-IDTBR1) compound and its designed derivatives were optimized with frequency analyses at the M06/6-311G(d,p) level. These optimized structures were further characterized by different quantum chemical approaches. The study required that the designed compounds possess a low energy gap in comparison to that of O-IDTBR1 (2.385 eV). Moreover, density of state (DOS) calculations supported the FMO analysis and displayed charge transfers from the HOMO to the LUMO in an effective manner. The λmax values of the investigated chromophores were observed to be greater than that of the reference compound. Amazingly, the highest amplitude of linear polarizability ⟨α⟩ and first (ßtot) and second hyperpolarizability values were achieved by NFBC6 at 1956.433, 2155888.013, and 7.868 × 108 au, respectively, among all other derivatives. Effective NLO findings revealed that nonfullerene-based derivatives may contribute significantly to NLO technology.
RESUMO
Many researchers are engaged nowadays in developing efficient photovoltaic materials to accomplish the demand of modern technology. Nonfullerene small molecular acceptors (NF-SMAs) show potential photovoltaic performance, accelerating the development of organic solar cells (OSCs). Herein, the first theoretical designing of a series of indacenodithiophene-based (IDIC1-IDIC6) acceptor chromophores was done by structural tailoring with various well-known acceptors from the recently synthesized IDICR molecule. For the selection of the best level of density functional theory (DFT), various functionals such as B3LYP, M06-2X, CAM-B3LYP, and ωB97XD with the 6-311G(d,p) basis set were used for the UV-visible analysis of IDICR. Consequently, UV-visible results revealed that an interesting agreement was found between experimental and DFT-based values at the B3LYP level. Therefore, quantum chemical investigations were executed at the B3LYP/6-311G(d,p) level to evaluate the photovoltaic and optoelectronic properties. Structural tailoring with various acceptors resulted in a narrowing of the energy gap (2.245-2.070 eV) with broader absorption spectra (750.919-660.544 nm). An effective transfer of charge toward lowest unoccupied molecular orbitals (LUMOs) from highest occupied molecular orbitals (HOMOs) was studied, which played a crucial role in conducting materials. Further, open circuit voltage (V oc) analysis was performed with respect to HOMO PBDB-T -LUMOACCEPTOR, and all of the derivatives exhibited a comparable value of voltage with that of the parent chromophore. Lower reorganization energies in titled chromophores for holes and electrons were examined, which indicated the higher rate of mobility of charges. Interestingly, all of the designed chromophores exhibited a preferable optoelectronic response compared to the reference molecule. Therefore, this computed framework demonstrates that conceptualized chromophores are preferable and might be used to build high-performance organic solar cells in the future.
RESUMO
This investigation is focused on the synthesis of two halo-functionalized crystalline Schiff base (imine) compounds: (E)-2-methoxy-6-(((3-(trifluoromethyl)phenyl)imino)methyl)phenol (MFIP) and (E)-1-(((2-fluorophenyl)imino)methyl)naphthalen-2-ol (FPIN) by the condensation reaction of substituted benzaldehydes and substituted aniline. The crystal structures of MFIP and FPIN were determined unambiguously by single-crystal X-ray diffraction (SC-XRD) studies. Intermolecular interactions and the role of fluorine atoms in the stabilization of the crystal packing are explored for both compounds using Hirshfeld surface analysis. Accompanied with experimental studies, quantum chemical calculations were also performed for comprehensive structure elucidation at the M06/6-311G(d,p) level of theory. A comparison of experimental and density functional theory results for geometrical parameters exhibited excellent agreement. Interestingly, Frontier molecular orbitals and natural bond orbital (NBO) findings revealed that intramolecular charge transfer and hyper-conjugation interactions had played a significant role to stabilize the molecules. Both compounds exhibited a relatively larger value of hardness with a smaller global softness, which, as proposed by the SC-XRD and NBO study, shows a higher stability. Nonlinear optical (NLO) findings showed that FPIN manifested a larger value of linear polarizability ( = 293.06 a.u.) and second-order hyperpolarizability (<γ> = 3.31 × 105 a.u.) than MFIP ( = 252.42 and <γ> = 2.08 × 105 a.u.) due to an extended conjugation. The above-mentioned findings of the entitled compounds may play a crucial role in NLO applications.
RESUMO
A series of 4-((4-methylphenylsulfonamido)methyl)cyclohexanecarboxylic acid (NaMSCCA) transition metal complexes [Cu(II), Zn(II), Ni(II), Mn(II), and Co(II)] have been synthesized by precipitation method. The characterization was done by physical techniques, FT-IR spectroscopy, mass spectrometry, and NMR spectroscopy. The molecular structures of nickel (II) AZ-3 and cobalt (II) AZ-5 complexes were determined by the X-ray diffraction technique and found to crystallize in the triclinic space group P-1. The coordination geometry around the central nickel (AZ-3) and cobalt (AZ-5) atoms was square planar bipyramidal. Molecular docking was performed with duplex DNA of sequence d(CGCGAATTCGCG)2 DNA to determine the probable binding mode of compounds. Then these synthesized compounds were used to perform DNA cleavage activity through the agarose gel electrophoresis method. Among the compounds, compounds AZ-1 and AZ-2 exhibited good nuclease activity. The DNA sequence of breast-cancer suppressor gene 1 (BRCA1) was amplified through PCR and interaction studies of compounds AZ-1 and AZ-2 were performed through gel electrophoresis and fluorescence emission spectroscopy. The expression analysis of the BRCA1 gene was also performed to quantify the expression relative fold change (2^-(∆∆CT)) after treatment with compounds. All synthesized compounds were evaluated for their antioxidant and antiglycation activities and AZ-2 exhibited excellent results. The molecular docking study of these compounds was performed against the protein structure of advanced glycation end products to support the experimental results. Anticancer activity of compounds was performed through MTT assay. Copper and zinc complexes depicted the highest anticancer activity against human breast adenocarcinoma (MCF7) and human corneal epithelial cell (HCEC) cell lines.
Assuntos
Complexos de Coordenação , Humanos , Complexos de Coordenação/farmacologia , Complexos de Coordenação/química , Níquel/química , Simulação de Acoplamento Molecular , Sulfonamidas/farmacologia , Espectroscopia de Infravermelho com Transformada de Fourier , Genes BRCA1 , Cobalto/química , Cobre/química , DNA/química , Sulfanilamida , Ligantes , Proteína BRCA1RESUMO
Poly(vinyl alcohol) (PVA) is an excellent membrane-forming polymer and can be modified with potato starch and methyl acrylate monomers to obtain copolymers with improved physical and chemical properties. The study presents the synthesis of poly(vinyl alcohol)-g-starch-poly(methyl acrylate) PVA-g-St-g-PMA copolymers using microwave irradiation technique and potassium persulfate initiator. Solution casting and solvent evaporation methods were adopted for the fabrication of polyvinyl alcohol-g-starch-acrylamide composite membranes. The synthesized graft copolymer was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and thermal analysis. The modified nanocomposite membranes were showed very promising results with the parameters permeability and selectivity. The nanocomposite membranes exhibited the advantages of easy handling and reuse.
RESUMO
In the present study, we reported the efficient synthesis of novel, heterocyclic, coumarin-based pyrano-chromene derivatives, 2-amino-8-methyl-5-oxo-4-[2-(2-oxo-2H-chromen-3-ylmethoxy)-phenyl]-4H,5H-pyrano[3,2-c]chromene-3-carbonitrile (4a) and 2-amino-8-methyl-5-oxo-4-[2-(2-oxo-2H-chromen-3-ylmethoxy)-phenyl]-4H,5H-pyrano[3,2-c]chromene-3-carboxylic acid methyl ester (4b). The chemical structures of synthesized compounds were resolved by employing various spectroscopic techniques like UV-Vis, FT-IR, 1H & 13C NMR, and single crystal X-ray diffraction (SC-XRD) analysis. The compounds; 4a and 4b, with appealing π-bonded skeleton were further analyzed in terms of their electronic and structural aspects using an integral approach of density functional theory (DFT) and time-dependent DFT (TD/DFT). The methodology: M06-2X/6-31G(d,p) level of theory was applied to compare their experimental data with theoretical outcomes using quantum chemical analysis. The frontier molecular orbitals (FMOs) study revealed that, 4a possesses a low band gap (5.168 eV) as compared to 4b (6.308 eV). Global reactivity parameters were associated with E gap values as 4a, with the lowest band gap showed the smaller value of hardness (0.094 eV) and a larger value of softness (5.266 eV). The non-linear optical (NLO) insight exhibited that, the average polarizability ãαã and second hyperpolarizability (γ tot) were observed in 4a as 6.77005 × 10-23 and 0.145 × 104 esu, respectively. Overall, the computational studies suggest that the investigated compounds have distinct NLO properties.
RESUMO
A series of hydrazone derivatives of 2-(benzamido) benzohydrazide was designed, synthesized, and characterized utilizing FTIR, NMR and UV spectroscopic techniques along with mass spectrometry. Compound 10 was also characterized through X-ray crystallography. These synthesized compounds were assessed for their potential as anti-Alzheimer's agents by checking their AChE and BChE inhibition properties by in vitro analysis. The synthesized derivatives were also evaluated for their antioxidant potential along with cytotoxicity studies. The results clearly indicated that dual inhibition of both the enzymes acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) was achieved by most of the compounds (03-13), showing varying IC50values. Remarkably, compound 06 (IC50 = 0.09 ± 0.05 for AChE and 0.14 ± 0.05 for BChE) and compound 13 (IC50 = 0.11 ± 0.03 for AChE and 0.10 ± 0.06 for BChE) from the series showed IC50 values comparable to the standard donepezil (IC50 = 0.10 ± 0.02 for AChE and 0.14 ± 0.03 for BChE). Moreover, the derivative 11 also exhibited selective inhibition against BChE with IC50 = 0.12 ± 0.09. Meanwhile, compounds 04 and 10 exhibited good anti-oxidant activities, showing % scavenging of 95.06% and 82.55%, respectively. Cytotoxicity studies showed that the synthesized compounds showed cell viability greater than 80%; thus, these compounds can be safely used as drugs. DFT and molecular docking studies also supported the experimental findings.
RESUMO
Star-shaped three-dimensional (3D) twisted configured acceptors are a type of nonfullerene acceptors (NFAs) which are getting considerable attention of chemists and physicists on account of their promising photovoltaic properties and manifestly promoted the rapid progress of organic solar cells (OSCs). This report describes the peripheral substitution of the recently reported highly efficient 3D star-shaped acceptor compound, STIC, containing a 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (IC) end-capped group and a subphthalocyanine (SubPc) core unit. The 3D star-shaped SubPc-based NFA compound STIC is peripherally substituted with well-known end-capped groups, and six new molecules (S1-S6) are quantum chemically designed and explored using density functional theory (DFT) and time-dependent DFT (TDDFT). Density of states (DOS) analysis, frontier molecular orbital (FMO) analysis, reorganization energies of electrons and holes, open-circuit voltage, transition density matrix (TDM) surface, photophysical characteristics, and charge-transfer analysis of selected molecules (S1-S6) are evaluated with the synthesized reference STIC. The designed molecules are found in the ambience of 2.52-2.27 eV with a reduction in energy gap of up to 0.19 eV compared to R values. The designed molecules S3-S6 showed a red shift in the absorption spectrum in the visible region and broader shift in the range of 605.21-669.38 nm (gas) and 624.34-698.77 (chloroform) than the R phase values of 596.73 nm (gas) and 616.92 nm (chloroform). The open-circuit voltages are found with the values larger than R values in S3-S6 (1.71-1.90 V) and comparable to R in the S1 and S2 molecules. Among all investigated molecules, S5 due to the combination of extended conjugation and electron-withdrawing capability of end-capped acceptor moiety A5 is proven as the best candidate owing to promising photovoltaic properties including the lowest band gap (2.27 eV), smallest λe = 0.00232 eV and λh = 0.00483 eV, highest λmax values of 669.38 nm (in gas) and 698.77 nm (in chloroform), and highest V oc = 1.90 V with respect to HOMOPTB7-Th-LUMOacceptor. Our results suggest that the selected molecules are fine acceptor materials and can be used as electron and/or hole transport materials with excellent photovoltaic properties for OSCs.
RESUMO
A series of N-trifluoroacetyl-2-pyrazolines have been synthesized via cyclization of chalcones in the presence of trifluoroacetic acid and hydrazine as a base. The method used for the preparation of pyrazolines was found to be an efficient one as all of the compounds were obtained in good yield (up to 79%). Various spectroscopic techniques established the structures and additionally corroborated the compounds 2a and 2e by single crystal X-ray. Newly synthesized pyrazolines were investigated for their potential as antimicrobial agents. Compound 2a displayed promising antimicrobial activity against pathogenic Escherichia coli and Pseudomonas aeruginosa. Furthermore, the mechanism of the antimicrobial activity of 2a was demonstrated with the help of scanning electron microscopy (SEM), which revealed complete damage of the bacterial cell membrane, providing dead cell debris in the milieu. The minimum inhibitory concentration (MIC) observed was 79 and 90 µM against E. coli and P. aeruginosa, respectively. Hence, these compounds might be significantly useful in antimicrobial drug development.
Assuntos
Antibacterianos/farmacologia , Escherichia coli/efeitos dos fármacos , Pseudomonas aeruginosa/efeitos dos fármacos , Pirazóis/farmacologia , Antibacterianos/síntese química , Antibacterianos/química , Cristalografia por Raios X , Relação Dose-Resposta a Droga , Testes de Sensibilidade Microbiana , Modelos Moleculares , Estrutura Molecular , Pirazóis/síntese química , Pirazóis/química , Relação Estrutura-AtividadeRESUMO
In this study, noble ligands of (E)-N'-(benzo[d]dioxol-5-ylmethylene)-4-methyl-benzenesulfonohydrazide (BDMMBSH) were prepared via a simple condensation method using benzo-[d][1,3]-dioxole carbaldehyde, benzenesulfonylhydrazine (BSH), and 4-methyl-benzenesulphonylhydrazine (4-MBSH) in good yield, which were crystallized in acetone, EtOAc, and EtOH. The BDMMBSH derivatives were characterized using different spectroscopic techniques, such as 1H-NMR, 13C-NMR, FTIR, and UV-Vis spectroscopy, and their crystal structures were analyzed using the single crystal X-ray diffraction method (SCXRDM). Subsequently, the BDMMBSH compounds were used for the significant detection of the carcinogenic heavy metal ion, lead (Pb2+), via a reliable electrochemical approach. A sensitive and selective Pb2+ sensor was developed via the deposition of a thin layer of BDMMBSH on a GCE with the conducting polymer matrix Nafion (NF). The sensitivity, LOQ, and LOD of the proposed sensor towards Pb2+ were calculated from the calibration curves to be 2220.0 pA µM-1 cm-2, 320.0 mM, and 96.0 pM, respectively. The validation of the BDMMBSH/GCE/NF sensor probe was performed via the selective determination of Pb2+ in spiked natural samples with a satisfactory and rational outcome.
RESUMO
A series of new solid esters was synthesized by using greener chemistry strategy involving simple reaction of an alcohol with sulfonamide ligand. Characterization study of these methyl (1), ethyl (2) isopropyl (3) and n-butyl (4) ester of 4-((4-chlo-rophenylsulfonamido)methyl)cyclohexanecarboxylic acid was done by using FTIR, NMR mass spectrometry and X-ray crystallography. The compounds were optimized with Gaussian software according to basis set B3LYP/6-31G(d,p) and their different parameters related to structure were calculated. Furthermore, all compounds of the series were screened for their in vitro biological applications involving anti-bacterial (Chromohalobactor salixgens, Halomonas halofila, Escherichia coli, Staphylococcus aureus, Bacillus subtilis, and Shiegella sonnei), anti-fungal (Aspergillus niger), anti-oxidant (DPPH scavenging activity) and enzyme inhibition (acetylcholine esterase and butyrylcholine esterase) study. Sulfonamide based esters were also docked against selected enzymes (AChE and BChE) using MOE software for their mode of binding. Results obtained from these biological evaluations showed that such compounds have potential against targeted activity.