RESUMO
The nonlinear conversion of photons from lower to higher energy is important for a wide range of applications, from quantum communications and optoelectronics to solar energy conversion and medicine. Triplet-triplet annihilation upconversion (TTA UC), which utilizes an absorber/emitter molecular pair, is a promising tool for upconversion applications requiring low intensity light such as photovoltaics, photocatalysis, and bioimaging. Despite demonstrations of efficient TTA UC in solution, practical applications have proven difficult, as thin films retard the necessary energy transfer steps and result in low emission yields. In this work, TTA UC emission from a thin film is greatly enhanced through integration into plasmonic nanogap cavities consisting of a silver mirror, a nanometer-scale polymer spacer containing a TTA molecular pair, and colloidally synthesized silver nanocubes. Mechanistic studies performed by varying the nanocube side length (45-150 nm) to tune the nanogap cavity resonance paired with simulations reveal absorption rate enhancement to be the primary operative mechanism in overall TTA UC emission enhancement. This absorption enhancement decreases the TTA UC threshold intensity by an order of magnitude and allows TTA UC emission to be excited with light up to 120 nm redder than the usable wavelength range for the control samples. Further, combined nanogap cavities composed of two distinct nanocube sizes result in surfaces which simultaneously enhance the absorption rate and emission rate. These dual-size nanogap cavities result in 45-fold TTA UC emission enhancement. In total, these studies present TTA UC emission enhancement, illustrate how the usable portion of the spectrum can be expanded for a given sensitizer-emitter pair, and develop both mechanistic understanding and design rules for TTA UC emission enhancement by plasmonic nanostructures.
RESUMO
Precise charge dynamics could help to improve the operation of solar cells and sensors.
RESUMO
An abundance of metallic metasurfaces have been realized with miniscule, intricate features capable of tailored scattering, reflection, and absorption; however, high losses through heat limit their use in optoelectronics. Here, codesign of a detector and a polarization-sensing metasurface overcomes this challenge by utilizing the heat generation for integrated pyroelectric detection of the incoming light polarization. Using a nanogap metasurface with asymmetric metallic elements, polarization-sensitive photodetection exhibits high extinction ratios up to 19 for orthogonally polarized light and allows extraction of Stokes parameters with <12% deviation from theoretical values. This polarization-sensitive photodetector is ultrathin, consisting of active layers of only 290 nm, and exhibits fast response times of â¼2 ns. The structure is fully integrated, requiring no external cameras, detectors, or power sources, and points toward the creation of layered, multifunctional devices that utilize exotic metasurface properties for novel and compact sensing and imaging.
RESUMO
Molecular dyes, called sensitizers, with a cis-[Ru(LL)(dcb)(NCS)2] structure, where dcb is 4,4'-(CO2H)2-2,2'-bipyridine and LL is dcb or a different diimine ligand, are among the most optimal for application in dye-sensitized solar cells (DSSCs). Herein, a series of five sensitizers, three bearing two dcb ligands and two bearing one dcb ligand, were anchored to mesoporous thin films of conducting tin-doped indium oxide (ITO) or semiconducting TiO2 nanocrystallites. The number of dcb ligands impacts the surface orientation of the sensitizer; density functional theory (DFT) calculations revealed an â¼1.6 Å smaller distance between the oxide surface and the Ru metal center for sensitizers with two dcb ligands. Interfacial electron transfer kinetics from the oxide material to the oxidized sensitizer were measured as a function of the thermodynamic driving force. Analysis of the kinetic data with Marcus-Gerischer theory indicated that the electron coupling matrix element, Hab, was sensitive to distance and ranged from Hab = 0.23 to 0.70 cm-1, indicative of nonadiabatic electron transfer. The reorganization energies, λ, were also sensitive to the sensitizer location within the electric double layer and were smaller, with one exception, for sensitizers bearing two dcb ligands λ = 0.40-0.55 eV relative to those with one λ = 0.63-0.66 eV, in agreement with dielectric continuum theory. Electron transfer from the oxide to the photoexcited sensitizer was observed when the diimine ligand was more easily reduced than the dcb ligand. Lateral self-exchange "hole hopping" electron transfer between surface-anchored sensitizers was found to be absent for sensitizers with two dcb ligands, while those with only one were found to hop with rates similar to those previously reported in the literature, khh = 47-89 µs-1. Collectively, the kinetic data and analysis reveal that interfacial kinetics are highly sensitive to the surface orientation and sensitizers bearing two dcb ligands are most optimal for practical applications of DSSCs.
RESUMO
The reorganization energy (λ) for interfacial electron transfer (ET) and proton-coupled ET (PCET) from a conductive metal oxide (In2O3:Sn, ITO) to a surface-bound water oxidation catalyst was extracted from kinetic data measured as a function of the thermodynamic driving force. Visible light excitation resulted in rapid excited-state injection (kinj > 108 s-1) to the ITO, which photo-initiated the two interfacial reactions of interest. The rate constants for both reactions increased with the driving force, -ΔG°, to a saturating limit, kmax, with rate constants consistently larger for ET than for PCET. Marcus-Gerischer analysis of the kinetic data provided the reorganization energy for interfacial PCET (0.90 ± 0.02 eV) and ET (0.40 ± 0.02 eV), respectively. The magnitude of kmax for PCET was found to decrease with pH, behavior that was absent for ET. Both the decrease in kmax and the larger reorganization energy for an unwanted competing PCET reaction from the ITO to the oxidized catalyst showcases a significant kinetic advantage for driving solar water oxidation at high pH. Computational analysis revealed a larger inner-sphere reorganization energy contribution for PCET than for ET arising from a more significant change in the Ru-O bond length for the PCET reaction. Extending the Marcus-Gerischer theory to PCET by including the excited electron-proton vibronic states and the proton donor-acceptor motion provided an apparent reorganization energy of 1.01 eV. This study demonstrates that the Marcus-Gerischer theory initially developed for ET can be reliably extended to PCET for quantifying and interpreting reorganization energies observed experimentally.
Assuntos
Prótons , Água , Elétrons , Transporte de Elétrons , OxirreduçãoRESUMO
A family of three ruthenium bipyridyl rigid-rod compounds of the general form [Ru(bpy)2(LL)](PF6)2 were anchored to mesoporous thin films of tin-doped indium oxide (ITO) nanocrystals. Here, LL is a 4-substituted 2,2-bipyridine (bpy) ligand with varying numbers of conjugated phenylenethynylene bridge units between the bipyridine ring and anchoring group consisting of a bis-carboxylated isophthalic group. The visible absorption spectra and the formal potentials, Eo(RuIII/II), of the surface anchored rigid-rods were insensitive to the presence of the phenylene ethynylene bridge units in 0.1 M tetrabutyl ammonium perchlorate acetonitrile solutions (TBAClO4/CH3CN). The conductive nature of the ITO enabled potentiostatic control of the Fermi level and hence a means to tune the Gibbs free energy change, -ΔG°, for electron transfer from the ITO to the rigid-rods. Pseudo-rate constants for this electron transfer reaction increased as the number of bridge units decreased at a fixed -ΔG°. With the assumption that the reorganization energy, λ, and the electronic coupling matrix element, Hab, were independent of the applied potential, rate constants measured as a function of -ΔG° and analyzed through Marcus-Gerischer theory provided estimates of Hab and λ. In rough accordance with the dielectric continuum theory, λ was found to increase from 0.61 to 0.80 eV as the number of bridge units was increased. In contrast, Hab decreased markedly with distance from 0.54 to 0.11 cm-1, consistent with non-adiabatic electron transfer. Comparative analysis with previously published studies of bridges with an sp3-hybridized carbon indicated that the phenylene ethynylene bridge does not enhance electronic coupling between the oxide and the rigid-rod acceptor. The implications of these findings for practical applications in solar energy conversion are specifically discussed.
RESUMO
Efficient excited-state electron transfer between an iron(III) photosensitizer and organic electron donors was realized with green light irradiation. This advance was enabled by the use of the previously reported iron photosensitizer, [Fe(phtmeimb)2]+ (phtmeimb = {phenyl[tris(3-methyl-imidazolin-2-ylidene)]borate}, that exhibited long-lived and luminescent ligand-to-metal charge-transfer (LMCT) excited states. A benchmark dehalogenation reaction was investigated with yields that exceed 90% and an enhanced stability relative to the prototypical photosensitizer [Ru(bpy)3]2+. The initial catalytic step is electron transfer from an amine to the photoexcited iron sensitizer, which is shown to occur with a large cage-escape yield. For LMCT excited states, this reductive electron transfer is vectorial and may be a general advantage of Fe(III) photosensitizers. In-depth time-resolved spectroscopic methods, including transient absorption characterization from the ultraviolet to the infrared regions, provided a quantitative description of the catalytic mechanism with associated rate constants and yields.
RESUMO
The kinetics for interfacial electron transfer (ET) from a transparent conductive oxide (tin-doped indium oxide, ITO, Sn:In2O3) to molecular acceptors 4-[N,N-di(p-tolyl)amino]benzylphosphonic acid, TPA, and [RuII(bpy)2(4,4'-(PO3H2)2-bpy)]2+, RuP, positioned at variable distances within and beyond the electric double layer (EDL), were quantified in benzonitrile and methanol by nanosecond absorption spectroscopy as a function of the thermodynamic driving force, -ΔG°. Relevant ET parameters such as the rate constant, ket, reorganization energy, λ, and electronic coupling, Hab, were extracted from the kinetic data. Overall, ket increased as the distance between the molecular acceptor and the conductor decreased. For redox active molecules within the Helmholtz planes of the EDL, ket was nearly independent of -ΔG°, consistent with a negligibly small λ value. Rips-Jortner analysis revealed a non-adiabatic electron transfer mechanism consistent with Hab < 1 cm-1. The data indicate that the barrier for electron transfer is greatly diminished at the conductor-electrolyte interface.
RESUMO
Classical capacitance studies have revealed that the first layer of water present at an aqueous metal-electrolyte interface has a dielectric constant less than 1/10th of that of bulk water. Modern theory indicates that the barrier for electron transfer will decrease substantially in this layer; yet, this important prediction has not been tested experimentally. Here, we report the interfacial electron transfer kinetics for molecules positioned at variable distances within the electric double layer of a transparent conductive oxide as a function of the Gibbs free energy change. The data indicate that the solvent reorganization is indeed near zero and increases to bulk values only when the molecules are positioned greater than 15 Å from the conductive electrode. Consistent with this conclusion, lateral intermolecular electron transfer, parallel to a semiconducting oxide electrode, was shown to be more rapid when the molecules were within the electric double layer. The results provide much needed feedback for theoretical studies and also indicate a huge kinetic advantage for aqueous electron transfer and redox catalysis that takes place proximate to a solid interface.
RESUMO
The total reorganization energy, λ, for interfacial electron transfer, ET, from a conductive electrode to redox-active molecules at fixed positions within the electric double layer, EDL, has been determined experimentally. Conductive indium-tin-oxide (ITO, In2O3:Sn) mesoporous films were functionalized with 4-[N,N-di(p-tolyl)-amino]benzylphosphonic acid (TPA) and/or [RuII(bpy)2(4,4'-(PO3H2)2-bpy)]2+ (RuP), where bpy is 2,2'-bipyridine. The small inner-sphere reorganizations, λi, for RuIII/IIP and TPA+/0 make them excellent probes of outer-sphere reorganization energy, λo, as λi ⪠λo such that λ = λi + λo ≈ λo. Consecutive layer-by-layer addition of ZrIV-bridged methylenediphosphonic acid enabled positioning at distances from 4 to 27 Å from the ITO. Excited-state injection into the ITO by RuP* generated ITO(e-)|RuIIIP. For ITO cofunctionalized with TPA and RuP, subnanosecond lateral ET yielded ITO(e-)|TPA+. The kinetics for ET from ITO to RuIIIP or TPA+ were quantified spectroscopically as a function of applied potential (Eapp) and hence driving force, -ΔG°. Marcus-Gerischer analysis of this data provided λ. Significantly, λo was near zero at close electrode proximity, λ = 0.11 eV at a distance of â¼4 Å, as manifest by kinetics largely insensitive to Eapp. In agreement with dielectric continuum theory, λ increased to values expected in CH3CN solution when the molecule was positioned at a distance of â¼27 Å (λ = 0.94 eV). The data reveal small intrinsic barriers for electron transfer proximate to conductive interfaces, which is an exploitable behavior in solar energy conversion and other applications that utilize transparent conductive oxides to accept or deliver electrons.
RESUMO
A study of SnO2/TiO2 core/shell films was undertaken to investigate the influences of shell thickness and post deposition sintering on electron localization and transport properties. Electrochemical reduction of the materials resulted in the appearance of a broad visible-near IR absorbance that provided insights into the electronic state(s) within the core/shell structures. As the shell thickness was increased from 0.5 to 5 nm, evidence for the presence of a SnxTi1-xO2 interfacial state emerged that was physically located between the core and the shell. The lifetime of photoinjected electrons increased with the shell thickness. Electron transport occurred through the SnO2 core; however, when materials with shell thicknesses ≥2 nm were annealed at 450 °C, a new electron transport pathway through the shell was evident. The data indicate that these materials are best described as SnO2/SnxTi1-xO2/TiO2 where electrons preferentially localize in a SnxTi1-xO2 interfacial state and transport through SnO2 and annealed TiO2 (if present). The implications of these results for applications in solar energy conversion are discussed.
RESUMO
The reorganization energy, λ, for interfacial electron transfer (ET) and for proton-coupled electron transfer (PCET) between a water oxidation catalyst and a conductive In2O3:Sn (ITO) oxide were extracted from kinetic data by application of Marcus-Gerischer theory. Specifically, light excitation of the water oxidation catalyst [RuII(tpy)(4,4'-(PO3H2)2-bpy)OH2]2+ (RuII-OH2), where tpy is 2,2':6',2â³-terpyridine and bpy is 2,2'-bipyridine, anchored to a mesoporous thin film of ITO nanocrystallites resulted in rapid excited-state injection ( kinj > 108 s-1). The subsequent reaction of the injected electron (ITO(e-)) and the oxidized catalyst was quantified spectroscopically on nanosecond and longer time scales. The metallic character of ITO allowed potentiostatic control of the reaction free energy change -Δ Go over a 1 eV range. At pH values below the p Ka = 1.7 of the oxidized catalyst, ET was the primary reaction. Within the pH range 2 ≤ pH ≤ 5, an interfacial PCET reaction (ITO(e-) + RuIII-OH + H+â RuII-OH2) occurred with smaller rate constants. Plots of the rate constants versus -Δ Go provided a reorganization energy of λPCET = 0.9 eV and λET = 0.5 eV. A second water oxidation catalyst provided similar values and demonstrated generality. The utilization of conductive oxides is shown to be a powerful tool for quantifying PCET reorganization energies at oxide surfaces for the first time.
Assuntos
Complexos de Coordenação/química , Água/química , Catálise , Complexos de Coordenação/efeitos da radiação , Elétrons , Índio/química , Cinética , Luz , Oxirredução , Prótons , Rutênio/química , Rutênio/efeitos da radiação , Termodinâmica , Estanho/químicaRESUMO
5-hydroxytryptophan (5-HTP) has shown therapeutic promise in a range of human CNS disorders. But native 5-HTP immediate release (IR) is poorly druggable, as rapid absorption causes rapid onset of adverse events, and rapid elimination causes fluctuating exposure. Recently, we reported that 5-HTP delivered as slow-release (SR) in mice augmented the brain pro-serotonergic effect of selective serotonin reuptake inhibitors (SSRIs), without the usual adverse events associated with 5-HTP IR. However, our previous study entailed translational limitations, in terms of route, dose, and duration. Here we modeled oral 5-HTP SR in mice by administering 5-HTP via the food. We modeled oral SSRI treatment via fluoxetine in the water, in a regimen recapitulating clinical pharmacokinetics and pharmacodynamics. 5-HTP SR produced plasma 5-HTP levels well within the range enhancing brain 5-HT function in humans. 5-HTP SR robustly increased brain 5-HT synthesis and levels. When administered with an SSRI, 5-HTP SR enhanced 5-HT-sensitive behaviors and neurotrophic mRNA expression. 5-HTP SR's pro-serotonergic effects were stronger in mice with endogenous brain 5-HT deficiency. In a comprehensive screen, 5-HTP SR was devoid of overt toxicological effects. The present preclinical data, appreciated in the context of published 5-HTP clinical data, suggest that 5-HTP SR could represent a new therapeutic approach to the plethora of CNS disorders potentially treatable with a pro-serotonergic drug. 5-HTP SR might in particular be therapeutically relevant when brain 5-HT deficiency is pathogenic and as an adjunctive augmentation therapy to SSRI therapy.
Assuntos
5-Hidroxitriptofano/farmacologia , 5-Hidroxitriptofano/administração & dosagem , 5-Hidroxitriptofano/análise , Administração Oral , Animais , Comportamento Animal/efeitos dos fármacos , Química Encefálica , Feminino , Fluoxetina/farmacologia , Masculino , Camundongos Transgênicos , Estudo de Prova de Conceito , Inibidores Seletivos de Recaptação de Serotonina/farmacologiaRESUMO
The electrografting of [Ru(ttt)(tpy-C6H4-N2+)]3+, where "ttt" is 4,4',4â³-tri-tert-butyl-2,2':6',2â³-terpyridine, was investigated on several wide band gap metal oxide surfaces (TiO2, SnO2, ZrO2, ZnO, In2O3:Sn) and compared to structurally analogous sensitizers that differed only by the anchoring group, i.e., -PO3H2 and -COOH. An optimized procedure for diazonium electrografting to semiconductor metal oxides is presented that allowed surface coverages that ranged between 4.7 × 10-8 and 10.6 × 10-8 mol cm-2 depending on the nature of the metal oxide. FTIR analysis showed the disappearance of the diazonium stretch at 2266 cm-1 after electrografting. XPS analysis revealed a characteristic peak of Ru 3d at 285 eV as well as a peak at 531.6 eV that was attributed to O 1s in Ti-O-C bonds. Photocurrents were measured to assess electron injection efficiency of these modified surfaces. The electrografted sensitizers exhibited excellent stability across a range of pHs spanning from 1 to 14, where classical binding groups such as carboxylic and phosphonic derivatives were hydrolyzed.
RESUMO
Previous work suggested that hemoglobin (Hb) tetramer formation slows autoxidation and hemin loss and that the naturally occurring mutant, Hb Providence (HbProv; ßK82D), is much more resistant to degradation by H2O2 We have examined systematically the effects of genetic cross-linking of Hb tetramers with and without the HbProv mutation on autoxidation, hemin loss, and reactions with H2O2, using native HbA and various wild-type recombinant Hbs as controls. Genetically cross-linked Hb Presbyterian (ßN108K) was also examined as an example of a low oxygen affinity tetramer. Our conclusions are: (a) at low concentrations, all the cross-linked tetramers show smaller rates of autoxidation and hemin loss than HbA, which can dissociate into much less stable dimers and (b) the HbProv ßK82D mutation confers more resistance to degradation by H2O2, by markedly inhibiting oxidation of the ß93 cysteine side chain, particularly in cross-linked tetramers and even in the presence of the destabilizing Hb Presbyterian mutation. These results show that cross-linking and the ßK82D mutation do enhance the resistance of Hb to oxidative degradation, a critical element in the design of a safe and effective oxygen therapeutic.