Tilt and decentration of the crystalline lens in ultra-high myopia with cataract and its influencing factors: A study based on CASIA2'.

OBJECTIVE: This study aims to examine the characteristics and influencing factors of crystalline lens tilt and decentration in ultra-high myopic cataract patients, as measured by the CASIA2. METHODS AND ANALYSIS: 60 eyes scheduled for cataract surgery with an axial length (AL) ≥ 28 mm were included. The IOLMaster700 was utilized to measure AL and the white-to-white (WTW) distance. The CASIA2 was employed to measure front curvature radius (FCR), crystalline lens tilt, and crystalline lens decentration. The relationships between lens tilt, decentration, and related factors were evaluated. RESULTS: The degree of lens tilt was 4.62 ± 2.44°, and the decentration was 0.20 (Q1 0.13, Q3 0.28) mm. Among the 60 eyes, 11 (18.3%) had a tilt ≥7°, and 6 (10%) had a decentratiolens tilt ≥7° (P = 0.038, P = 0.018). Eyes with AL >30.00 mm and FCR <8.45 mm had a higher degree of lens tilt. Additionally, a tilt ≥7° was associated with a greater decentration (P = 0.032), n. CONCLUSION: Preoperative crystalline lenses in eyes with ultra-high myopia and cataract exhibit certain degrees of tilt and decentration. An AL >30 mm is a risk factor for a lens tilt ≥7° and an decentration ≥0.4 mm. An FCR <8.45 mm is a risk factor for increased lens tilt, and a tilt ≥7° is a risk factor for increased lens decentrati ≥ 0.4 mm. An increase in AL and FCR <8.45 mm were risk factors for a and eyes with AL >30.00 mm had a higher degree of decentration (P = 0.005).

Serum γ-glutamyltransferase levels and obesity status changes the risk of prehypertension in Chinese adults.

Objective: It's well known that γ-Glutamyltransferase (γ-GGT) and obesity plays an important role in the development of preHT. However, the effect of γ-GGT on preHT in populations with different obesity status remains unclear. Methods: From February 2014 to January 2018, a total of 20,368 participants were enrolled in this study after excluding those with hypertension and liver diseases. Fasting blood samples were collected to measure γ-GGT and blood lipid levels and glucose indices. Demographic and clinical parameters such as sex, age, height, weight, neck circumference (NC), waist circumference (WC), hip circumference (HC), and body fat ratio (BFR); and information on smoking and alcohol consumption were collected by trained medical professionals. Results: Participants were divided into three groups based on obesity status. The prevalence of preHT was 83.5 % in the obesity group was higher than that in the overweight group (58.9 %) and the normal group (47.1 %). γ-GGT in different categories of obesity indices were significantly different, and higher obesity indices were found with higher γ-GGT levels. The interaction of γ-GGT and obesity indices such as NC, WC, HC, and BFR on the prevalence of preHT was significant (P = 0.028, 0.002, 0.007, and 0.034, respectively). Serum γ-GGT was found to be positively associated with preHT in participants with normal and overweight body mass indices. Conclusion: Our results indicate that γ-GGT is a risk factor for preHT in participants who are nonobese, and that the obesity indices NC, WC, HC, BFR, and γ-GGT were contributing factors in increasing the risk of preHT.

Exposure to volatile organic compounds is a risk factor for diabetes retinopathy: a cross-sectional study.

Introduction: A few past experimental studies have indicated that exposure to volatile organic compounds (VOCs) might be a potential risk factor for diabetes retinopathy (DR). However, these findings lack substantial support from extensive epidemiological research. This large-scale cross-sectional study aimed to examine whether exposure to low levels of VOCs in the general population is associated with diabetes mellitus (DM) and DR. Methods: The analytical data was from the National Health and Nutrition Examination Survey (NHANES) dataset (2011-2018). To minimize the potential impact of gender and age on the findings, propensity score matching was utilized to align the data selection. Relationships between blood VOCs and DM and DR were assessed in a sample of 2,932 adults using the logistic regression models. Additionally, Bayesian kernel machine regression (BKMR) models and Weighted Quantile Sum (WQS) were conducted for mixture exposure analysis. Results: The result shows VOCs were positive associated with DM and DR in US adults, as assessed by WQS model, and the calculated odd ratios (ORs) [95% confidence interval (C.I)] were 53.91(34.11 ~ 85.22) and 7.38(3.65 ~ 14.92), respectively. Among the components of VOCs, 1,2-Dibromoethane, Carbon Tetrachloride and 2,5-Dimethylfuran were positive related with the DR, and ORs (95%C.I) were 2.91(2.29 ~ 3.70), 2.86(2.25 ~ 3.65) and 2.19(1.79 ~ 2.94), respectively. BKMR model shows that there was a dose-response relationship between combined VOCs and DR, although the relationship was non-linearly. Conclusion: This study suggested that exposure to VOCs may increase the risk of DR, which had important public health implications.

Effect of capsular tension ring on the refractive outcomes of patients with extreme high axial myopia after phacoemulsification.

PURPOSE: The aim of the study is to evaluate the effect of capsular tension ring (CTR) implantation following cataract surgery on the refractive outcomes of patients with extreme high axial myopia. METHODS: Sixty eyes (with an axial length of ≥26 mm) were retrospectively reviewed and classified into two groups: CTR group (n = 30), which underwent CTR implantation following phacoemulsification, and control group (n = 30), which did not undergo CTR implantation. Intraocular lens (IOL) calculation was performed using Barrett Universal II (UII), Haigis, and SRK/T formulas. The refractive prediction error (PE) was calculated by subtracting the postoperative refraction from predicted refraction. The mean PE (MPE), mean absolute error (MAE), and percentages of eyes that had a PE of ±0.25, ±0.50, ±1.00, or ±2.00 diopters (D) were calculated and compared. RESULTS: No significant differences were observed in PE between the two groups. The Barrett UII formula revealed a lower AE in the CTR group than in the control group (p = 0.015) and a lower AE than the other two formulas (p = 0.0000) in both groups. The Barrett UII formula achieved the highest percentage of eyes with a PE of ±0.25 D (66.67%). CONCLUSIONS: The refractive outcomes were more accurate in eyes with CTR implantation than in those with routine phacoemulsification based on the Barrett UII formula. The Barrett UII formula was recommended as the appropriate formula when planning CTR implantation in high myopia.

Visfatin promotes angiogenesis of RF/6A cells through upregulation of VEGF/VEGFR-2 under high-glucose conditions.

Visfatin is a type of adipocytokine that is highly expressed in the serum and vitreous of patients with diabetic retinopathy. The purpose of the present study was to investigate the effect and mechanism of visfatin on angiogenesis in RF/6A monkey chorioretinal retinal endothelial cells under high glucose (HG) conditions in vitro. RF/6A cells were randomly divided into four groups: Control group, under high glucose (HG) group (25 mM D-glucose), visfatin group 1 (10 nM visfatin + 25 mM D-glucose), visfatin group 2 (20 nM visfatin + 25 mM D-glucose) and visfatin group 3 (30 nM visfatin + 25 mM D-glucose). After 24 and 48 h, a Cell Counting Kit-8, wound-healing assay and Matrigel tube formation assay were used to detect cell proliferation, migration and cell tube formation, respectively. Subsequently, the expression levels of VEGF and VEGF receptor 2 (VEGFR-2) in cells of visfatin group 3 were observed by western blot and reverse transcription-quantitative PCR analyses. At 24 and 48 h, the cell proliferation and migration distance in the HG group were reduced compared with those in the control group (P<0.05). Compared with those in the HG group, the cell proliferation and migration distance in all visfatin groups were significantly increased (P<0.05), with the highest significance in visfatin group 3. Visfatin significantly promoted tube-like structure formation by RF/6A cells, particularly at the concentration of 30 nM. The protein and mRNA expression levels of VEGF and VEGFR-2 were significantly increased in the HG group as compared with those in the control group (P<0.05). Furthermore, compared with those in the HG group, VEGF and VEGFR-2 protein and mRNA expression levels were significantly increased in visfatin group 3 (P<0.05). Overall, visfatin promoted the proliferation, migration and tube formation of RF/6A cells under HG conditions, suggesting that visfatin has a potent effect on retinal neovascularization and its mechanism may be associated with the promotion of VEGF and VEGFR-2 expression under HG conditions.

Polarity-Tunable Host Materials and Their Applications in Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes.

A series of polarity-tunable host materials were developed based on oligocarbazoles and diphenylphosphine oxide, and their polarities can be tuned through increasing distance of acceptor and donor units. Density functional theory calculations were employed, and photoluminescence spectra in different polar solvents were measured to illustrate different polarities of these host materials. As CZPO has relatively stronger polarity, electroluminescence (EL) spectrum of solution-processed device based on 6 wt % PXZDSO2:CZPO is 7 nm red-shifted relative to that of other host materials based devices. Besides, a comparable impressive external quantum efficiency (EQE) value of 18.7% is achieved for an evaporation-processed yellow device consisting of FCZBn, which is superior to that of the device based on CBP (4,4'-dicarbazolyl-1,1'-biphenyl) (17.0%), and its efficiency roll-off is also obviously reduced, giving an EQE value as high as 16.3% at the luminance of 1000 cd/m2. In addition, from CZPO to FCZBn as the polarities of host materials decrease, EL spectra of solution-processed devices based on DMAC-DPS emitter blue-shift constantly from 496 to 470 nm. The current work gives a constructive approach to control EL spectra of organic light-emitting diodes with a fixed thermally activated delayed fluorescence emitter by tuning the polarities of host materials.

Evaporation- and Solution-Process-Feasible Highly Efficient Thianthrene-9,9',10,10'-Tetraoxide-Based Thermally Activated Delayed Fluorescence Emitters with Reduced Efficiency Roll-Off.

Two novel evaporation- and solution-process-feasible thermally activated delayed fluorescence emitters, green-light-emission ACRDSO2 and yellow-light-emission PXZDSO2, based on a brand-new electron-acceptor moiety thianthrene-9,9',10,10'-tetraoxide, are developed for organic light-emitting diodes. The solution-processed devices, without any hole-transport layer, exhibit competitive performance and reduced efficiency roll-off compared with corresponding vacuum-deposited devices.

Two new triterpenoid saponins from the root of Ilex pubescens.

Two new triterpenoid saponins, named ilexsaponins B(4) (1) and C (2), have been isolated from the roots of Ilex pubescens. Their structures have been established as ilexgenin B 3-O-alpha-L-arabinopyranosyl-(2-->1)-beta-D-glucopyranosyl-(2-->1)-beta-D-xylopyranoside (1) and 3-O-beta-D-xylopyranosyl spathodic acid 28-beta-D-glucopyranosyl ester (2) by means of spectral and chemical methods.

Clinical implementation of intensity-modulated arc therapy.

PURPOSE: Intensity-modulated arc therapy (IMAT) is a method for delivering intensity-modulated radiation therapy (IMRT) using rotational beams. During delivery, the field shape, formed by a multileaf collimator (MLC), changes constantly. The objectives of this study were to (1) clinically implement the IMAT technique, and (2) evaluate the dosimetry in comparison with conventional three-dimensional (3D) conformal techniques. METHODS AND MATERIALS: Forward planning with a commercial system (RenderPlan 3D, Precision Therapy International, Inc., Norcross, GA) was used for IMAT planning. Arcs were approximated as multiple shaped fields spaced every 5-10 degrees around the patient. The number and ranges of the arcs were chosen manually. Multiple coplanar, superimposing arcs or noncoplanar arcs with or without a wedge were allowed. For comparison, conventional 3D conformal treatment plans were generated with the same commercial forward planning system as for IMAT. Intensity-modulated treatment plans were also created with a commercial inverse planning system (CORVUS, Nomos Corporation). A leaf-sequencing program was developed to generate the dynamic MLC prescriptions. IMAT treatment delivery was accomplished by programming the linear accelerator (linac) to deliver an arc and the MLC to step through a sequence of fields. Both gantry rotation and leaf motion were enslaved to the delivered MUs. Dosimetric accuracy of the entire process was verified with phantoms before IMAT was used clinically. For each IMAT treatment, a dry run was performed to assess the geometric and dosimetric accuracy. Both the central axis dose and dose distributions were measured and compared with predictions by the planning system. RESULTS: By the end of May 2001, 50 patients had completed their treatments with the IMAT technique. Two to five arcs were needed to achieve highly conformal dose distributions. The IMAT plans provided better dose uniformity in the target and lower doses to normal structures than 3D conformal plans. The results varied when the comparison was made with fixed gantry IMRT. In general, IMAT plans provided more uniform dose distributions in the target, whereas the inverse-planned fixed gantry treatments had greater flexibility in controlling dose to the critical structures. Because the field sizes and shapes used in the IMAT were similar to those used in conventional treatments, the dosimetric uncertainty was very small. Of the first 32 patients treated, the average difference between the measured and predicted doses was -0.54 +/- 1.72% at isocenter. The 80%-95% isodose contours measured with film dosimetry matched those predicted by the planning system to within 2 mm. The planning time for IMAT was slightly longer than for generating conventional 3D conformal plans. However, because of the need to create phantom plans for the dry run, the overall planning time was doubled. The average time a patient spent on the table for IMAT treatment was similar to conventional treatments. CONCLUSION: Initial results demonstrated the feasibility and accuracy of IMAT for achieving highly conformal dose distributions for different sites. If treatment plans can be optimized for IMAT cone beam delivery, we expect IMAT to achieve dose distributions that rival both slice-based and fixed-field IMRT techniques. The efficient delivery with existing linac and MLC makes IMAT a practical choice.