RESUMO
Dynamic manipulation of an object's infrared radiation characteristics is a burgeoning technology with significant implications for energy and information fields. However, exploring efficient stimulus-spectral response mechanism and realizing simple device structures remains a formidable challenge. Here, a novel dynamic infrared emissivity regulation mechanism is proposed by controlling the localized surface plasmon resonance absorption of aluminum-doped zinc oxide (AZO) nanocrystals through ultraviolet photocharging/oxidative discharging. A straightforward device architecture that integrates an AZO nanocrystal film with an infrared reflective layer and a substrate, functioning as a photo-induced dynamic infrared emissivity modulator, which can be triggered by weak ultraviolet light in sunlight, is engineered. The modulator exhibits emissivity regulation amount of 0.72 and 0.61 in the 3-5 and 8-13 µm ranges, respectively. Furthermore, the modulator demonstrates efficient light triggering characteristic, broad spectral range, angular-independent emissivity, and long cyclic lifespan. The modulator allows for self-adaptive daytime radiative cooling and nighttime heating depending on the ultraviolet light in sunlight and O2 in air, thereby achieving smart thermal management for buildings with zero-energy expenditure. Moreover, the potential applications of this modulator can extend to rewritable infrared displays and deceptive infrared camouflage.
RESUMO
Metamaterials offer exciting opportunities for developing multispectral stealth due to their unique electromagnetic properties. However, currently transparent radar-infrared-visible compatible stealth metamaterials typically involve complex hierarchical designs, leading to thickness and transparency limitations. Here, we propose an integrated metamaterial for multispectral stealth with high transparency. Our design features an ITO/dielectric/ITO sandwich structure, with the upper-layer ITO acting as a resonator for broadband microwave absorption while maintaining a high filling ratio to suppress infrared (IR) radiation. Experimental results demonstrate excellent performance, with over 90% microwave absorption in 8-18â GHz, an IR emissivity of approximately 0.36 in 3-14â µm, an average optical transmittance of 74.1% in 380-800â nm, and a thickness of only 2.4 mm. With its multispectral compatibility, the proposed metamaterial has potential applications in stealth and camouflage fields.
RESUMO
Infrared electrochromic devices (IR-ECDs) are pivotal for dynamic thermal regulation. However, the quest for all-solid-state IR-ECDs with high stability and a broadly tunable range of emissivity remains a challenge. This study presents the development of an all-solid-state infrared electrochromic device (IR-ECD) with the structure of ITO/HxWO3/Ta2O5/Pd/Mg3Ni based on the hydrogen-induced metal-insulator transition of Mg-Ni alloy films. The emissivity modulation is improved by film stack optimization, with changes of 0.32 and 0.47 in the 3-5 and 7.5-14 µm bands, respectively. The introduction of an ultrathin Ti isolation layer between the catalytic and electrolyte layers enhances the cyclic stability. Our findings offer a novel strategy for the design and fabrication of all-solid-state IR electrochromic devices and highlight the potential of Mg-Ni alloy-based all-solid-state IR-ECDs in advanced energy and information fields.
RESUMO
Pisha sandstone (PS) is a special interbedded rock in the middle reaches of the Yellow River that experiences severe weathering and is loose and broken. Due to severe multiple erosion events, the Pisha sandstone region is called "the most severe water loss and soil erosion in the world" and "the ecological cancer of the earth". As a special pozzolanic mineral, PS has the potential to be used as precursors for the synthesis of green and low-carbon geopolymer gel materials and applied in ecological restoration. This paper aims to undertake a phase review of the precursors for geopolymer gel materials. The genesis and distribution, physical and chemical characterization, erosion characteristics, and advances in the ecological restoration of PS are all summarized. Furthermore, current advances in the use of PS for the synthesis of geopolymer gel materials in terms of mechanical properties and durability are discussed. The production of Pisha sandstone geopolymer gels through the binder jetting technique and 3D printing techniques is prospected. Meanwhile, the prospects for the resource application of PS in mine rehabilitation and sustainable ecology are discussed. In the future, multifactor-driven comprehensive measures should be further investigated in order to achieve ecological restoration of the Pisha sandstone region and promote high-quality development of the Yellow River Basin.
RESUMO
Pollution characteristics, distribution, risk and sources of 7 heavy metals in sediments of Yangtze River Estuary were investigated. Total concentration ranges of As, Cr, Cu, Cd, Pb, Zn and Ni were [0, 16.5], [1.48, 51.3], [2.66, 318], [0, 0.99], [35.6, 992], [8, 91.3] and [1.88, 108] mg/kg, respectively. Based on the potential ecological risk index and Geoaccumulation index, it was determined that Pb is the most polluted heavy metal. According to class I standard of "Marine sediment quality" of China, mean baseline levels multiples were Pb (8.34) > Cu (0.57) > Cr (0.37) > Zn (0.355) > Ni (0.352) > As (0.28) > Cd (0.00). The study also found the heavy metal content of Pb is the most serious, but most of the Pb content comes from the residual state, which has minimal impact on the environment. The East Nanhui Shoal was identified as the most polluted sub-area in terms of Pb pollution, followed by other specific locations. Considering the pollution level and transport costs, the study concluded that dredge soils of the Yangtze River Estuary Deepwater Channel are not suitable for the restoration of East Hengsha Shoal.
RESUMO
BACKGROUND: Taurine upregulated gene 1 (TUG1) has been identified on long noncoding RNA (lncRNA); however, its function in myocardial cells following ischemia/ reperfusion (I/R) injury has not been explored. This study aimed to investigate the role of LncTUG1 in I/R injury by focusing on its relationship with autophagy induction by regulating miR-34a-5p expression. METHODS: We established a myocardial I/R model and H9C2 hypoxia-ischemic and reoxygenation (HI/R) conditions to induce I/R injury. TTC, Western blot, CCK-8 assay, quantitative reverse transcription PCR, flow cytometry, and confocal microscopy were used to assess the size of myocardial infarct, level of some apoptotic-related and autophagy-associated proteins, cell viability, the level of LncRNA TUG1, apoptosis, and autophagy, respectively. RESULTS: The results revealed that a TUG1 knockdown protected against I/R-induced myocardial injury by decreasing the impairment in cardiac function. LncRNA TUG1 expression was increased in a myocardial I/R model and HI/R in H9C2 cells. Moreover, inhibition of LncTUG1 enhanced H9C2 cell viability and protected the cells from HI/R-induced apoptosis. Silencing LncRNA TUG1 promoted HI/R-induced autophagy. Furthermore, TUG1 siRNA upregulated the level of miR-34a-5p compared to the HI/R group. The protective effect of LncRNA TUG1 inhibition on H9C2 cells following HI/R was eliminated by blocking autophagy with an miR-34a-5p inhibitor. CONCLUSION: These findings indicated that inhibiting TUG1 may reduce the extent of myocardial I/R injury by regulating miR-34a-5p. Taken together, these results suggest that LncRNA TUG1 may represent a novel therapeutic target for myocardial I/R injury.
RESUMO
Tunable microwave absorbers have gained significant interest due to their capability to actively control microwaves. However, the existing architecture-change-based approach lacks flexibility, and the active-element-based approach is constrained by a narrowband operation or small dynamic modulation range. Here, a novel electrically tunable microwave absorbing device (TMAD) is demonstrated that can achieve dynamic tuning of the average reflection amplitude between -13.0 and -1.2 dB over a broadband range of 8-18 GHz enabled by reversible metal electrodeposition. This reversible tunability is achieved by electrodepositing silver (Ag) layers with controlled morphology on nanoscopic platinum (Pt) films in a device structure similar to a tunable Salisbury screen, employing Ag electrodeposited on Pt films as the modifiable resistive layer. Furthermore, this TMAD possesses a simple device architecture, excellent bistability, and multispectral compatibility. Our approach offers a new strategy for dynamically manipulating microwaves, which has potential utility in intelligent camouflage and communication systems.
RESUMO
Understanding the growth behavior and morphology evolution of defects in 2D transition metal dichalcogenides is significant for the performance tuning of nanoelectronic devices. Here, the low-voltage aberration-corrected transmission electron microscopy with an in situ heating holder and a fast frame rate camera to investigate the sulfur vacancy lines in monolayer MoS2 is applied. Vacancy concentration-dependent growth anisotropy is discovered, displaying first lengthening and then broadening of line defects as the vacancy densifies. With the temperature increase from 20 °C to 800 °C, the defect morphology evolves from a dense triangular network to an ultralong linear structure due to the temperature-sensitive vacancy migration process. Atomistic dynamics of line defect reconstruction on the millisecond time scale are also captured. Density functional theory calculations, Monte Carlo simulation, and configurational force analysis are implemented to understand the growth and reconstruction mechanisms at relevant time and length scales. Throughout the work, high-resolution imaging is closely combined with quantitative analysis of images involving thousands of atoms so that the atomic-level structure and the large-area statistical rules are obtained simultaneously. The work provides new ideas for balancing the accuracy and universality of discoveries in the TEM study and will be helpful to the controlled sculpture of nanomaterials.
RESUMO
Dynamic infrared emissivity regulators, which can efficiently modulate infrared radiation beyond vision, have emerged as an attractive technology in the energy and information fields. The realization of the independent modulation of visible and infrared spectra is a challenging and important task for the application of dynamic infrared emissivity regulators in the fields of smart thermal management and multispectral camouflage. Here, we demonstrate an electrically controlled infrared emissivity regulator that can achieve independent modulation of the infrared emissivity while maintaining a high visible transparency (84.7% at 400-760 nm). The regulators show high degree of emissivity regulation (0.51 at 3-5 µm, 0.41 at 7.5-13 µm), fast response ( < 600 ms), and long cycle life ( > 104 cycles). The infrared emissivity regulation is attributed to the modification of the carrier concentration in the surface depletion layer of aluminum-doped zinc oxide nanocrystals. This transparent infrared emissivity regulator provides opportunities for applications such as on-demand smart thermal management, multispectral displays, and adaptive camouflage.
RESUMO
The unmet spectral mimicry of foliar green in camouflage materials is hampered by the lack of colorants with similar spectral properties to chlorophyll, resulting in substantial risks of exposure from hyperspectral target detection. By drawing inspiration from leaf chromogenesis, a microcapsule colorant with a chloroplast-like structure and chlorophyll-like absorption is developed, and a generic bilayer coating is designed to provide high spectral similarity to leaves with different growth stages, seasons, and species. Specifically, the microcapsule colorant preserves the monomeric absorption of the internal phthalocyanine and features the manufacturability of conventional pigments, such as amenability to painting and patterning, and compatibility to different substrates. The pigmented artificial leaves successfully deceive the hyperspectral classification algorithm in a foliar background, and outperforming the state-of-art spectral simulation materials. This coloration strategy expands the knowledge base of the spectral fine tuning of composite colorants, which are essential for their application in spectral-resolved optical materials.
Assuntos
Algoritmos , Clorofila , Cápsulas/análise , Clorofila/química , Folhas de Planta/química , Simulação por ComputadorRESUMO
The treatment of silted sediment in the river is a global problem. The accumulation of waste sediment will lead to an adverse impact on the environment. In this paper, the silted sediment was reused to produce geopolymer composite materials via alkali-activated gelling modification. The effects of the modifiers of sodium silicate solution, quicklime, and Na2SO4 admixture, and the dosage of the slag, fly ash, and silica fume admixture, and curing conditions and age, on the compressive strength and microstructure of the geopolymer-modified sediment materials were studied. The crystalline phase and hydration products of the modified sediment geopolymer composites were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), respectively. A compressive strength test was conducted to evaluate the mechanical properties of the composites. The results showed that the type and dosage of modifier, amount of mineral admixture additive, cure conditions, and cure age had significant effects on the mechanical properties of the composites. The effect of the addition of mineral admixture on the compressive strength of the modified sediment specimens was more noticeable than that of the modifier. The compressive strength of the geopolymer-modified specimens was greatly increased by the addition of mineral dopants. When 10 wt.% silica fume is added, the compressive strength reaches a maximum value of 33.25 MPa at 60 days. The SEM-EDS results show that the C-S-H gels and C-A-S-H gels were the main hydration products. The results indicate that river siltation sediment is an excellent raw material for geopolymer-modified materials. It is feasible to produce reliable and sustainable hydraulic engineering materials by using river sediment geopolymer-modified materials.
RESUMO
The Yellow River has the highest sediment concentration in the world, and the Yellow River coarse sediment mainly comes from a particular kind of argillaceous sandstone, Pisha sandstone. This paper reports an investigation of the possibility of development of low-cost engineering materials using Pisha sandstone via ion exchange modification. The effect of modifiers with different concentration on the inhibition of volume expansion and the strength enhancement of modified Pisha sandstone were studied via ion exchange solidification. The effects of the concentration of ten types of modifier solutions and curing age were considered. The hydration of the mineral components, particle surface potential and reaction products were studied, respectively, by XRD, zeta potential, TG/DTG and SEM. Expansion volume and shear strength tests were conducted to assess the volume stability and mechanical property of modified Pisha sandstone. It showed that the expansion of Pisha sandstone was controlled and that the volume stability and shear strength were improved via ion exchange modification. The results of XRD, TG/DTG and SEM showed that the spacing of the crystal layers of the Pisha sandstone clay mineral and the mass lost had decreased significantly. When the concentration of the modifier was 0.05 mol/L, the volume reduced by 54.55% maximum and the shear strength reached the peak of 138 kPa.
RESUMO
Developing promoters that can boost the growth quality, efficiency, and robustness of two-dimensional (2D) transition metal dichalcogenides is significant for their industrial applications. Herein a new group (group IIA) of promoters in the periodic table has been disclosed, whose chlorides (especially CaCl2 and SrCl2) exhibit a versatile promoting effect on the CVD growth of various TMD monolayers, including hexagonal MoS2, MoSe2, Re doped MoS2, and triclinic ReS2. The promoting effect of group IIA promoters relies on the appropriate dose and is strongly substrate-dependent. The performances of five typical group IA-IIA metal chlorides are ranked by quantitative investigations, displaying periodic variations closely related to the electronegativities of the metal elements. A brand-new acid-base match model is proposed, attributing the promoting mechanism to an increase of the substrate basicity due to the usage of promoters, thus leading to the sufficient adsorption of the acidic precursor. Aberration-corrected annular dark field scanning transmission electron microscopy (ADF-STEM) was applied, unveiling anomalous grain boundaries (GBs) with a low density of coincident sites in the as-grown ReS2 and detailed atomic configurations of Re doped MoS2. This work expands the promoter library and gives an insight into GB engineering for the CVD growth of 2D TMDs.
RESUMO
BACKGROUND: Parachute mitral valve with reticular chordae tendineae is an extremely rare anomaly. CASE PRESENTATION: We present a case of parachute mitral valve associated with distinctive reticular chordae tendineae in an adult. It was diagnosed from the echocardiogram. The patient was referred for surgery. Valve analysis showed thickened mitral valve leaflets and commissures. The chordae tendinae were lengthy and thick. All the chordae tendinae merged into a solitary papillary muscle. A distinctive reticular fibrous tissue was found on mitral valve apparatus as the chordae tendinae intermixed each other. The only functional communication between the left atrium and the left ventricle was through the reticular spaces. This anomaly was considered to be unrepairable and was replaced with a mechanical valve. CONCLUSIONS: An extremely rare and unique case of parachute mitral valve associated with reticular chordae tendineae was reported. Mitral valve replacement is a reasonable choice in patients with parachute mitral valve with reticular chordae tendineae.
Assuntos
Cordas Tendinosas/anormalidades , Insuficiência da Valva Mitral/etiologia , Insuficiência da Valva Mitral/cirurgia , Adulto , Cordas Tendinosas/diagnóstico por imagem , Ecocardiografia , Próteses Valvulares Cardíacas , Humanos , Masculino , Músculos Papilares/anormalidadesRESUMO
The emulation of the reflectance of green leaf in the solar spectral band (300-2500 nm) has garnered increasing attention from researchers. Currently, various materials have been proposed and investigated as potential bionic leaves. However, the problems such as poor weather durability, heavy metal pollution, and complex preparation technology still persist. Herein, a bionic leaf is prepared from an ultramarine green pigment as the functional material, polyvinylidene fluoride (PVDF) as the film-forming material, and LiCl as the humidizer. To prepare the ultramarine green pigment, the sulfur anion is added into the ß cage of the 4A zeolite. The mechanisms and properties were discussed based on X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, and spectroscopic methods. The results show that the as-fabricated bionic leaf based on the 4A zeolite-derived ultramarine green pigment was able to demonstrate a high spectral similarity coefficient of 0.91 with the green leaf. Furthermore, the spectral similarity coefficient was increased to 0.94 after being subjected to a simulated rainforest environment for 48 h, which indicated its high weather durability.
RESUMO
Inkjet printing of functional materials has shown a wide range of applications in advertising, OLED display, printed electronics and other specialized utilities that require high-precision, mask-free, direct-writing deposition techniques. Nevertheless, the sedimentation risk of the refractory functional materials dispensed in inks hinders their further implementation. Herein, we present a bottom-up ink preparation strategy based on Cr2O3 by a one-step solvothermal method. The obtained ink remained stable under an equivalent natural sediment test for 2.5 years. The chemical composition of the solvothermal product was characterized, and the mechanism of the superior dispersion stability of Cr2O3 particles was analysed. These amorphous Cr2O3 particles were capped by ligands generated via low-temperature solvothermal reactions. Ethanol and acetylacetone covering the particle surfaces play an essential role in enhancing the solubility of Cr2O3 particles in the solvent forming the ultrastable colloidal ink. Moreover, this ink was successfully printed using a direct-write inkjet system JetLab®II on nylon fabrics, and the printed area of the fabrics shows a spectral correlation coefficient of 0.9043 to green leaves. Finally, we believe that the one-step bottom-up fabrication method of Cr2O3-based pigment inks may provide a general approach for preparing metal oxide-based pigment inks with long-term dispersion stability.
RESUMO
BACKGROUND: Aortoesophageal fistula (AEF) caused by an esophageal foreign body is a life-threatening crisis, with rapid progress and high mortality. The first case of AEF was reported in 1818, but the first successfully managed case was not until 1980. Although there have been some reports on this condition, in most cases, the aorta was invaded and corroded due to its adjacent relationship with the esophagus and subsequent mediastinitis. To date, few reports have described an aortic wall directly penetrated by a sharp foreign body, likely because this type of injury is extremely rare and most patients cannot receive timely treatment. Here, we present a rare case of a fish bone that directly pierced the aorta via the esophagus. CASE PRESENTATION: A 31-year-old female experienced poststernum swallowing pain after eating a meal of fish. Gastroscope showed a fishbone-like foreign body had penetrated the esophagus wall. Computed tomography revealed that the foreign body had directly pierced the aorta to form an AEF. Surgery was successfully performed to repair the aorta and esophagus. The postoperation and follow-up was uneventful. CONCLUSIONS: For the treatment of foreign bodies in the esophagus, we should be alert of the possibility of AEFs. The effective management of AEFs requires early diagnosis and intervention, as well as long-term treatment and follow-up, which still has a long way to go.
Assuntos
Aorta/lesões , Doenças da Aorta/cirurgia , Osso e Ossos , Fístula Esofágica/cirurgia , Corpos Estranhos/cirurgia , Adulto , Animais , Aorta/diagnóstico por imagem , Transtornos de Deglutição/etiologia , Fístula Esofágica/diagnóstico por imagem , Feminino , Corpos Estranhos/diagnóstico por imagem , Humanos , Dor/etiologia , Tomografia Computadorizada por Raios XRESUMO
Many species in nature have evolved remarkable strategies to visually adapt to the surroundings for the purpose of protection and predation. Similarly, acquiring the capabilities of adaptively camouflaging in the infrared (IR) spectrum has emerged as an intriguing but highly challenging technology in recent years. Here, we report adaptive thermal camouflage devices by bridging the optical and radiative properties of nanoscopic platinum (Pt) films and silver (Ag) electrodeposited Pt films. Specifically, these metal-based devices have large, uniform, and consistent IR tunabilities in mid-wave IR (MWIR) and long-wave IR (LWIR) atmospheric transmission windows (ATWs). Furthermore, these devices can be easily multiplexed, enlarged, applied to rough and flexible substrates, or colored, demonstrating their multiple adaptive camouflaging capabilities. We believe that this technology will be advantageous not only in various adaptive camouflage platforms but also in many thermal radiation management-related technologies.
RESUMO
Transient materials capable of disappearing rapidly and completely are critical for transient electronics. End-capped polyoxymethylene (POM) has excellent mechanical properties and thermal stability. However, research concerning the inherent thermal instability of POM without end-capping to obtain transient rather than stable materials, has never been reported. Here, POM without end-capping is proposed as a novel thermally triggered transient solid material that can vanish rapidly by undergoing conversion to a volatile gas, and a chemical vapor deposition method is developed to obtain a smooth POM substrate from the synthesized POM powder. Experimental and theoretical analysis was employed to reveal the mechanism whereby the POM substrate formed and vanished. A Cr/Au/SiO2/Cu memristor device, which was successfully deposited on the POM substrate by physical vapor deposition, exhibits bipolar resistive switching, suggesting that the POM substrate is suitable for use in electrical devices. Thermal triggering causes the POM substrate to vanish as the memristor disintegrates, confirming excellent transient performance. The deposited bulk POM material can completely vanish by thermally triggered depolymerization, and is suitable for physically transient substrates and packaging materials, demonstrating great prospects for application in transient electronics for information security.
RESUMO
LncRNA CASC11 is an oncogene in several types of cancer, while its role in atherosclerosis is unknown. In the present study we found that CASC11 was downregulated, while IL-9 was upregulated in plasma of atherosclerosis patients compared with healthy controls. Altered plasma levels of CASC11 and IL-9 distinguished atherosclerosis patients from healthy controls. CASC11 and IL-9 were significantly and inversely correlated in atherosclerosis patients but not in healthy controls. Exogenous IL-9 treatment failed to significantly affect expression levels of CASC11 in vascular smooth muscle cells (VSMC), while CASC11 overexpression resulted in the downregulation of IL-9. CASC11 overexpression also resulted in the downregulation of proliferation and promoted apoptosis of VSMC. Therefore, CASC11 may improve atherosclerosis by downregulating IL-9 and regulating VSMC apoptosis and proliferation.