The Production of Water Kefir Drink with the Addition of Dried Figs in the Horizontal Rotating Tubular Bioreactor.

Water kefir is a product obtained through the fermentation of sucrose solution, usually with some kind of dried fruit addition, by a combined culture of micro-organisms which are contained within kefir grains. Its popularity is rising because of the simplicity of its preparation and its anti-inflammatory, antioxidant, probiotic, and antibacterial effects. In this research, the water kefir production was studied in 250 mL jars, as well as in a horizontal rotating tubular bioreactor (HRTB). The first part of the research was conducted in smaller-scale (jars), wherein the optimal fruit and fruit portions were determined. These experiments included the addition of dried plums, apricots, raisins, dates, cranberries, papaya, and figs into 150 mL of initial sugar solution. Also, the optimal ratio between dried fruit and sucrose solution (0.2) at the beginning of the bioprocess was determined. The second part of this research was conducted using HRTB. The experiments in the HRTB were carried out by using different operational modes (constant or interval bioreactor rotation). A total of six different bioreactor setups were used, and in all experiments, figs were added at the beginning of the bioprocess (0.2 ratio between dried figs and sucrose solution). On the basis of the obtained results, the interval bioreactor rotation mode proved to be the better HRTB mode for the production of the water kefir, as the yield of the main fermentation products was higher, and their ratios were the most adequate for the quality of water kefir drink. The optimal results were obtained via HRTB setup 3/57 (3 min rotation, 57 min pause within 1 h) and rotation speed of 3 rpm. Furthermore, it is clear that HRTB has great potential for water kefir production due to the fact that HRTB experiments showed shorter fermentation times (at least five times) than water kefir production in jars.

Green Approach to Enhance the Recovery of Polyphenols from Blackcurrant and Bilberry Leaves: Evaluation of Microwave-Assisted and Pressurized Liquid Extraction.

The aim of the present study was to evaluate microwave-assisted (MAE) and pressurized liquid extraction (PLE) for the recovery of polyphenols from blackcurrant and bilberry leaves and the preservation of their antioxidant activity. The extractions were carried out varying the solvent/solid (SS) ratio, temperature and time. During MAE, increasing the SS ratio increased the polyphenol concentration in the extracts from blackcurrant and bilberry leaves, while increasing the temperature had a positive effect only on bilberry polyphenols. During PLE, only a temperature increase was a determining factor for the isolation of blackcurrant leave polyphenols. Based on polyphenol recovery, optimal extraction parameters were established resulting in a yield of 62.10 and 56.06 mg/g dw in the blackcurrant and bilberry MAE extracts and 78.90 and 70.55 mg/g dw in the PLE extracts. The optimized extracts were profiled by UPLC ESI MS2, and their antioxidant capacity was evaluated through FRAP, DPPH, ABTS and ORAC assays. The characterization of the extracts by UPLC ESI MS2 confirmed flavonols as the predominant compounds in both blackcurrant and bilberry leaves, while flavan-3-ols and procyanidins were the main compounds responsible for high antioxidant capacity as confirmed by the ABTS and ORAC assays. Due to the extract composition and antioxidant capacity, PLE proved to be a technique of choice for the production of blackcurrant and bilberry leave extracts with high potential for use as value-added ingredients in the food and nutraceutical industry.

Production of Acid and Rennet-Coagulated Cheese Enriched by Olive (Olea europaea L.) Leaf Extract-Determining the Optimal Point of Supplementation and Its Effects on Curd Characteristics.

This study investigated the potential of olive leaf extract (OLE), as a functional ingredient, to improve cheese properties, because it is rich in phenols. Milk and dairy products are poor in phenolic compounds. The main objective was to determine the most effective coagulation method and timing of OLE supplementation to maximize retention in the cheese matrix. Experimental cheeses were produced using the rennet and acid coagulation methods, with OLE added either directly to the cheese milk or to the curd phase. Three OLE effective concentrations corresponding to 25%, 50%, and 75% inhibition of DPPH reagent (EFC25, EFC50, and EFC75, respectively) were added, i.e., 11.5 mg GAE L-1, 16.6 mg GAE L-1, and 26.3 mg GAE L-1, respectively. The results showed that OLE significantly increased the concentration of total phenols, total flavonoids, and antioxidant activity in all cheese samples and in the residual whey, especially at higher effective concentrations (EFC 50 and EFC 75). Rennet-coagulated cheese to which OLE was added prior to coagulation (EM 25, EM 50, EM 75) exhibited higher hardness, gumminess, and chewiness but lower elasticity, suggesting alterations in the paracasein matrix. OLE did not adversely affect acidity, water activity, or cheese yield. However, higher EFC resulted in significant colour changes (∆E* > 3.0). In conclusion, the enrichment of cheesemaking milk with OLE and the application of the rennet coagulation method are the most suitable to optimise the production of OLE-enriched cheese. This research shows the potential to improve the nutritional value of cheese while maintaining its desired characteristics.

Phenolic, Headspace and Sensory Profile, and Antioxidant Capacity of Fruit Juice Enriched with Salvia officinalis L. and Thymus serpyllum L. Extract: A Potential for a Novel Herbal-Based Functional Beverages.

Since certain constituents are not naturally present in pure fruit juices, incorporating herbal extracts can provide specific sensory properties to the beverages and improve their biopotential. In our previous research, it was found that sage (Salvia officinalis L.), wild thyme (Thymus serpyllum L.), and combinations of their extracts had the highest total phenolic content and a unique composition of volatile compounds, which can contribute to the aromatic and antioxidant qualities of functional products. Therefore, this research aimed to investigate the potential of sage and wild thyme extracts, as well as their mixture (wild thyme:sage at 3:1, v/v), to enrich fruit juices (apple, pineapple, and orange). Obtained beverages were evaluated for sensory properties as well as phenolic and headspace composition (UPLC-MS/MS and HS-SPME/GC-MS analysis) and antioxidant capacity (ORAC assay). The incorporation of wild thyme extract in pineapple juice provided the most harmonious flavor and the highest content of volatile compounds (on PDMS/DVB fiber). The orange juice formulations were the most enriched with phenolic and volatile compounds (on DVB/CAR/PDMS fibers). The highest antioxidant capacity was observed in the formulation with orange juice and sage extract (22,925.39 ± 358.43 µM TE). This study demonstrated that enriching fruit juices with sage and wild thyme extracts could create functional beverages with improved sensory and health-promoting properties, providing valuable insights for the food and beverage industry to meet the growing demand of health-conscious consumers for natural and functional products.

Non-Volatile and Volatile Bioactives of Salvia officinalis L., Thymus serpyllum L. and Laurus nobilis L. Extracts with Potential Use in the Development of Functional Beverages.

Functional beverages based on herbal extracts are highly demanded products due to the presence of bioactives with promising health benefits and interesting and characteristic sensory properties. Mediterranean medicinal and aromatic herbs contain a wide range of bioactives (non-volatile polyphenols, volatile terpenes) that are important constituents of herbal extracts and essential oils. The antioxidant capacity and potential health benefits of these bioactives could be associated with their synergistic effects. Therefore, this study aimed to characterize the non-volatile and volatile bioactives of sage (Salvia officinalis L.), wild thyme (Thymus serpyllum L.) and laurel (Laurus nobilis L.) aqueous extracts and their two- and three-component mixtures as well as their antioxidant capacity. The content of total phenols, flavonoids, hydroxycinnamic acids and flavonols was determined spectrophotometrically. Individual polyphenols were analyzed by LC-MS/MS, the volatiles were analyzed by HS-SPME/GC-MS, and the antioxidant capacity was analyzed by ORAC and DPPH assays. The results showed that aqueous extracts of all examined herbs and their mixtures contained a high content of phenolic compounds ranging from 0.97 to 2.79 g L-1 of the sample, among which the most common were flavonols. At the same time, mono- and sesquiterpenes were the main volatiles. All extracts showed high antioxidant capacity, especially L. nobilis (781.62 ± 5.19 µmol TE mL-1 of the sample in the DPPH assay; 1896.10 ± 8.77 µmol TE mL-1 of the sample in the ORAC assay) and the two-component mixture of L. nobilis and T. serpyllum (679.12 ± 5.19 µmol TE mL-1 in the DPPH assay; 1913.38 ± 8.77 µmol TE mL-1 in the ORAC assay). Mixtures of herbal extracts have been shown to possess additive or synergistic effects, consequently contributing to higher antioxidant capacity. Therefore, two-component mixtures of herbal extracts showed promising potential for the production of functional beverages.

Microwave Assisted Extraction and Pressurized Liquid Extraction of Sulfated Polysaccharides from Fucus virsoides and Cystoseira barbata.

Sulfated polysaccharide fucoidan isolated from brown algae shows a wide range of biological activities that are significantly dependent on its chemical composition, which is closely related to the applied technique and extraction parameters. Therefore, the objective of this study was to evaluate the influence of microwave assisted extraction (MAE) and pressurized liquid extraction (PLE) parameters (solvent, temperature, time, and number of cycles) on the Fucus virsoides and Cystoseira barbata polysaccharide yield (%PS) and chemical composition (total sugar, fucose, and sulfate group). The optimal MAE parameters that resulted in the highest polysaccharide extraction from F. virsoides and C. barbata were 0.1 M H2SO4 for 10 min at 80 °C, while the optimal PLE parameters were 0.1 M H2SO4, for two cycles of 15 min at 140 °C. Furthermore, the %PS, chemical structure, molecular properties, and antioxidant activity of the F. virsoides and C. barbata polysaccharide extracts obtained with MAE, PLE, and conventional extraction (CE) performed under previously determinate optimal conditions were compared. PLE resulted in a significantly higher %PS from F. virsoides, while for C. barbata, a similar yield was achieved with CE and PLE, as well as CE and MAE, for both algae. Furthermore, the polysaccharides obtained using PLE had the highest polydispersity index, fucose, and sulfate group content, and the lowest uronic acid content; however their antioxidant activity was lower.

Advanced Technologies for the Extraction of Marine Brown Algal Polysaccharides.

Over the years, brown algae bioactive polysaccharides laminarin, alginate and fucoidan have been isolated and used in functional foods, cosmeceutical and pharmaceutical industries. The extraction process of these polysaccharides includes several complex and time-consuming steps and the correct adjustment of extraction parameters (e.g., time, temperature, power, pressure, solvent and sample to solvent ratio) greatly influences the yield, physical, chemical and biochemical properties as well as their biological activities. This review includes the most recent conventional procedures for brown algae polysaccharides extraction along with advanced extraction techniques (microwave-assisted extraction, ultrasound assisted extraction, pressurized liquid extraction and enzymes assisted extraction) which can effectively improve extraction process. The influence of these extraction techniques and their individual parameters on yield, chemical structure and biological activities from the most current literature is discussed, along with their potential for commercial applications as bioactive compounds and drug delivery systems.