Pharmacokinetics and pharmacodynamics of the factor XIa-inhibiting antibody osocimab in healthy male East Asian volunteers: Results from two phase 1 studies.

The pharmacokinetics, pharmacodynamics, immunogenicity, and safety of osocimab single doses in healthy Chinese and Japanese volunteers over 149 days were evaluated. Two phase 1 single-blinded, placebo-controlled studies with 27 Japanese and 50 Chinese participants were conducted. Osocimab was investigated with IV doses of 0.3, 1.25, and 2.5 mg/kg (Chinese study) and 0.3, 1.25, and 5.0 mg/kg (Japanese study), as well as SC doses of 3.0 and 6.0 mg/kg (Chinese study) and 6.0 mg/kg (Japanese study). The maximum plasma concentration was reached 1-3 h and 4-6 days after IV and SC administration, respectively. Osocimab exhibited a deviation from dose-proportional pharmacokinetics for AUC but not Cmax; higher doses had higher apparent clearance and disproportionately lower total exposure. A slightly lower exposure was observed in Japanese compared with Chinese volunteers after IV administration; conversely, relatively higher exposure in Japanese volunteers with SC dosing was identified. Osocimab was associated with a dose-dependent increase in activated partial thromboplastin time (aPTT). Maximal aPTT prolongations were observed 1-4 h and 2-6 days after IV and SC administration, respectively. Anti-drug antibodies of low titer were detected in 1/9 (11.1%) Japanese volunteers administered placebo and 26/40 (65.0%) Chinese volunteers administered osocimab. Adverse events were reported in 8/18 (44.4%) Japanese and 28/40 (70.0%) Chinese volunteers who received osocimab, as well as in 1/9 (11.1%) Japanese and 6/10 (60.0%) Chinese volunteers who received placebo. In conclusion, data did not suggest a clear dose-proportionality for osocimab within the investigated dose range. The effect of osocimab on aPTT was expected per its mechanism of action. Osocimab was generally well tolerated.

Micro/nanofabrication of heat management materials for energy-efficient building facades.

Advanced building facades, which include windows, walls, and roofs, hold great promise for reducing building energy consumption. In recent decades, the management of heat transfer via electromagnetic radiation between buildings and outdoor environments has emerged as a critical research field aimed at regulating solar irradiation and thermal emission properties. Rapid advancements have led to the widespread utilization of advanced micro/nanofabrication techniques. This review provides the first comprehensive summary of fabrication methods for heat management materials with potential applications in energy-efficient building facades, with a particular emphasis on recent developments in fabrication processing and material property design. These methods include coating, vapor deposition, nanolithography, printing, etching, and electrospinning. Furthermore, we present our perspectives regarding their advantages and disadvantages and our opinions on the opportunities and challenges in this field. This review is expected to expedite future research by providing information on the selection, design, improvement, and development of relevant fabrication techniques for advanced materials with energy-efficient heat management capabilities.

Unraveling ferroptosis in osteogenic lineages: implications for dysregulated bone remodeling during periodontitis progression.

Periodontitis is a highly prevalent disease characterized by inflammation and destruction of tooth-supporting tissues that leads to tooth loss in extreme situations. Elucidating the underlying mechanisms of periodontitis pathogenesis and progression will establish the groundwork for developing effective treatment strategies. Recently, evidence concerning the role of ferroptosis in periodontitis progression has emerged. Osteogenic lineage cells are key regulators of bone remodeling. Osteogenic cell death, as observed in experimental periodontitis models, disrupts the balance between bone resorption and bone formation. However, whether the osteogenic lineage undergoes ferroptosis during periodontitis and the corresponding effect on periodontitis progression remain elusive. Here, we investigated cell-specific ferroptosis within the alveolar bone in a murine periodontitis model. Through immunofluorescence double staining and immunohistochemistry, we identified ferroptotic osteocytes and osteoblasts in inflammatory alveolar bone. Next, in vivo administration of erastin or liproxstatin-1 was conducted to either induce or inhibit ferroptosis, respectively. Severe bone resorption and inflammation, accompanied by increased osteoclast formation and impaired osteogenic potential were detected following ferroptosis activation. Subsequently, we carried out in vitro experiments on osteocytes and further verified that ferroptosis enhanced the osteocytic expression of RANKL and IL-6. These findings suggest that ferroptosis occurring within the osteogenic lineage acts as a catalyst in the progression of periodontitis by stimulating osteoclastogenesis through the secretion of inflammatory cytokines and inhibiting osteoblastic function, providing insights into ferroptosis-induced alterations in microenvironment-based intercellular communication. Ferroptosis is a promising target for controlling inflammation and preventing bone resorption in periodontitis.

Mitochondrial Dysfunction in the Pathogenesis and Treatment of Oral Inflammatory Diseases.

Oral inflammatory diseases (OIDs) include many common diseases such as periodontitis and pulpitis. The causes of OIDs consist microorganism, trauma, occlusal factors, autoimmune dis-eases and radiation therapy. When treated unproperly, such diseases not only affect oral health but also pose threat to people's overall health condition. Therefore, identifying OIDs at an early stage and exploring new therapeutic strategies are important tasks for oral-related research. Mitochondria are crucial organelles for many cellular activities and disruptions of mitochondrial function not only affect cellular metabolism but also indirectly influence people's health and life span. Mitochondrial dysfunction has been implicated in many common polygenic diseases, including cardiovascular and neurodegenerative diseases. Recently, increasing evidence suggests that mitochondrial dysfunction plays a critical role in the development and progression of OIDs and its associated systemic diseases. In this review, we elucidated the critical insights into mitochondrial dysfunction and its involvement in the inflammatory responses in OIDs. We also summarized recent research progresses on the treatment of OIDs targeting mitochondrial dysfunction and discussed the underlying mechanisms.

Berry Curvature Dipole Induced Giant Mid-Infrared Second-Harmonic Generation in 2D Weyl Semiconductor.

Due to its inversion-broken triple helix structure and the nature of Weyl semiconductor, 2D Tellurene (2D Te) is promising to possess a strong nonlinear optical response in the infrared region, which is rarely reported in 2D materials. Here, a giant nonlinear infrared response induced by large Berry curvature dipole (BCD) is demonstrated in the Weyl semiconductor 2D Te. Ultrahigh second-harmonic generation response is acquired from 2D Te with a large second-order nonlinear optical susceptibility (χ(2) ), which is up to 23.3 times higher than that of monolayer MoS2 in the range of 700-1500 nm. Notably, distinct from other 2D nonlinear semiconductors, χ(2) of 2D Te increases extraordinarily with increasing wavelength and reaches up to 5.58 nm V-1 at ≈2300 nm, which is the best infrared performance among the reported 2D nonlinear materials. Large χ(2) of 2D Te also enables the high-intensity sum-frequency generation with an ultralow continuous-wave (CW) pump power. Theoretical calculations reveal that the exceptional performance is attributed to the presence of large BCD located at the Weyl points of 2D Te. These results unravel a new linkage between Weyl semiconductor and strong optical nonlinear responses, rendering 2D Te a competitive candidate for highly efficient nonlinear 2D semiconductors in the infrared region.

A solar/radiative cooling dual-regulation smart window based on shape-morphing kirigami structures.

The energy efficiency of buildings has become a critical issue due to their substantial contribution to global energy consumption. Windows, in particular, are often the least efficient component of the building envelope, and conventional smart windows focus solely on regulating solar transmittance while overlooking radiative cooling. Although several recent designs achieved dual-control of solar and radiative cooling, these windows still face limitations in terms of durability, limited modulation ability and energy-saving performance. To address these challenges, we propose a novel dual-control smart window design consisting of a reconfigurable kirigami structure and polydimethylsiloxane-laminated thermochromic hydrogel coated with silver nanowires. In summer, the thermochromic hydrogel turns translucent to suppress the solar heat gain, while the high emissivity kirigami structure covers the exterior surface of the window, promoting radiative cooling. In winter, the hydrogel becomes transparent to allow for solar transmission. Additionally, the kirigami structure undergoes an out-of-plane structural change, opening towards the outside environment to expose the underlying low-emissivity silver nanowires and suppress heat radiation. Our design achieves a promising solar transmittance modulation ability of ∼24% and a good long-wave infrared emissivity regulation ability of 0.5. Furthermore, it exhibits significantly improved durability, which is nine times longer than the lifespan of conventional smart hydrogels. Our novel approach offers a promising solution for constructing energy-efficient and durable smart windows and outperforms existing state-of-the-art solar/radiative cooling dual-regulation smart windows in the literature.

Enhancement of Out-of-Plane Spin-Orbit Torque by Interfacial Modification.

Spin-orbit torque (SOT)-induced switching of perpendicular magnetization in the absence of magnetic field is crucial for the application of SOT-based spintronic devices. Recent works have demonstrated that the low-symmetry crystal structure in CuPt/CoPt can give rise to an out-of-plane (OOP) spin torque and lead to deterministic magnetization switching without an external field. However, it is essential to improve OOP effective field for the efficient switching. In this work, the impact of interface oxidation on the generation of OOP effective field in a CuPt/ferromagnet heterostructure is systematically studied. By introducing an oxidized CuPt surface, it is found that the field-free switching performance shows remarkable improvement. OOP effective field measurement indicates that the oxidation treatment can enhance the OOP effective field by more than two times. It is also demonstrated that this oxidation-induced OOP SOT efficiency enhancement is independent of the device shapes, magnetic materials, or magnetization easy axis. This work contributes to improve the performance of SOT devices and provides an effective fabrication guidance for future spintronic devices that utilize OOP SOT.

A concise review of the orofacial mesenchymal stromal cells as a novel therapy for neurological diseases and injuries.

Orofacial mesenchymal stromal cells (OFMSCs) are mesenchymal stromal cells isolated from the oral and facial regions, which possess typical mesenchymal stromal cell features such as self-renewing, multilineage differentiation, and immunoregulatory properties. Recently, increasing studies have been carried out on the neurotrophic and neuroregenerative properties of OFMSCs as well as their potential to treat neurological diseases. In this review, we summarize the current evidence and discuss the prospects regarding the therapeutic potential of OFMSCs as a new approach to treat different neurological diseases and injuries.

Current-induced self-switching of perpendicular magnetization in CoPt single layer.

All-electric switching of perpendicular magnetization is a prerequisite for the integration of fast, high-density, and low-power magnetic memories and magnetic logic devices into electric circuits. To date, the field-free spin-orbit torque (SOT) switching of perpendicular magnetization has been observed in SOT bilayer and trilayer systems through various asymmetric designs, which mainly aim to break the mirror symmetry. Here, we report that the perpendicular magnetization of CoxPt100-x single layers within a special composition range (20 < x < 56) can be deterministically switched by electrical current in the absence of external magnetic field. Specifically, the Co30Pt70 shows the largest out-of-plane effective field efficiency and best switching performance. We demonstrate that this unique property arises from the cooperation of two structural mechanisms: the low crystal symmetry property at the Co platelet/Pt interfaces and the composition gradient along the thickness direction. Compared with that in bilayers or trilayers, the field-free switching in CoxPt100-x single layer greatly simplifies the SOT structure and avoids additional asymmetric designs.

Few-Layered WS2 Anchored on Co, N-Doped Carbon Hollow Polyhedron for Oxygen Evolution and Hydrogen Evolution.

Tungsten disulfide (WS2) is well known to have great potential as an electrocatalyst, but the practical application is hampered by its intrinsic inert plane and semiconductor properties. In this work, owing to a Co-based zeolite imidazole framework (ZIF-67) that effectively inhibited WS2 growth, few-layered WS2 was confined to the surface of Co, N-doped carbon polyhedron (WS2@Co9S8), with more marginal active sites and higher conductivity, which promoted efficient oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). For the first time, WS2@Co9S8 was prepared by mixing in one pot of a liquid phase and calcination, and WS2 realized uniform distribution on the polyhedron surface by electrostatic adsorption in the liquid phase. The obtained hybrid catalyst exhibited excellent OER and HER catalytic activity, and the OER potential was only 15 mV at 10 mA cm-2 higher than that of noble metal oxide (RuO2). The improvement of catalytic activity can be attributed to the enhanced exposure of sulfur edge sites by WS2, the unique synergistic effect between WS2 and Co9S8 on the metal-organic framework (MOF) surface, and the effective shortening of the diffusion path by the hollow multi-channel structure. Therefore, the robust catalyst (WS2@Co9S8) prepared by a simple and efficient synthesis method in this work will serve as a highly promising bifunctional catalyst for OER and HER.

Rapid preparation and antimicrobial activity of polyurea coatings with RE-Doped nano-ZnO.

The recent COVID-19 virus has led to a rising interest in antimicrobial and antiviral coatings for frequently touched surfaces in public and healthcare settings. Such coatings may have the ability to kill a variety of microorganisms and bio-structures and reduce the risk of virus transmission. This paper proposes an extremely rapid method to introduce rare-earth doping nano-ZnO in polyamines for the preparation of the anti-microbial polyurea coatings. The nano-ZnO is prepared by wet chemical method, and the RE-doped nano-ZnO was obtained by mixing nano ZnO and RE-dopants with an appropriate amount of nitric acid. This rapidly fabricated polyurea coating can effectively reduce bacteria from enriching on the surface. Comparing with pure nano-ZnO group, all the polyurea coatings with four different rare-earth elements (La, Ce, Pr and Gd) doped nano-ZnO. The La-doped nano-ZnO formula group indicates the highest bactericidal rate over 85% to Escherichia coli (E. coli) and Pseudomonas aeruginosa (Pseudomonas). Followed by Ce/ZnO, the bactericidal rate may still remain as high as 83% at room temperature after 25-min UV-exposure. It is believed that the RE-doping process may greatly improve the photocatalytic response to UV light as well as environmental temperature due to its thermal catalytic enhancement. Through the surface characterizations and bioassays, the coatings have a durably high bactericidal rate even after repeated usage. As polyurea coating itself has high mechanical strength and adhesive force with most substrate materials without peel-off found, this rapid preparation method will also provide good prospects in practical applications.

Polyoxometalates for bifunctional applications: Catalytic dye degradation and anticancer activity.

Improving the efficiencies of organic compound degradations by catalytic materials is a challenging materials research field. In our research, we successfully synthesized cobalt-based polyoxometalates (CoV-POMs) via a simple crystallization-driven self-assembly method. The incorporation of the newly synthesized CoV-POMs into peroxymonosulphate (PMS), forming a mixture, greatly enhancing the catalytic activation for a complete degradation of dye solution. The positive synergic effect between CoV-POMs and PMS was substantiated by a relatively meager degradation of less than 10% in the system without CoV-POMs, in which CoV-POMs played a vital role to activate PMS towards free radicals generation for dye degradation. Methylene blue (MB) and rhodamine B (RB) dyes were completely decolorized under 60 min with the presence of 40 mg/L CoV-POMs and 150 mg/L PMS. The CoV-POMs/PMS system was pH dependance with a lower dye degradation efficiency at elevated pH. The effect of pH was more prominent in RB dye, in which the degradation efficiency dropped drastically from 93.3% to 41.12% with the increase in the solution pH from 7 to 11. The quenching tests suggested that sulfate radicals were the dominant active species involving in the dye degradation reaction. Besides MB and RB dyes, CoV-POMs/PMS system also showed significant activity towards the degradation of phenol red (PR) and methyl orange (MO) dyes. In the biological test, CoV-POMs exhibited non-toxic behavior towards normal cells that reduced safety concern for the large-scale wastewater treatment application. In addition, the testing divulged the anticancer property of CoV-POMs with more than 35 % of A549 lung adenocarcinoma and MDA-MB-231 breast adenocarcinoma were killed with 250 mg/L CoV-POMs. The selective lethality of CoV-POMs towards cancer cells was found to be caused by different extents of cellular apoptosis. In overall, the synthesized bifunctional CoV-POMs manifested superior activities in the examined applications, specifically dye degradation and anticancer.

Biological and Physiochemical Methods of Biofilm Adhesion Resistance Control of Medical-Context Surface.

The formation of biofilms on medical-context surfaces gives the EPS embedded bacterial community protection and additional advantages that planktonic cells would not have such as increased antibiotic resistance and horizontal gene transfer. Bacterial cells tend to attach to a conditioning layer after overcoming possible electrical barriers and go through two phases of attachments: reversible and irreversible. In the first, bacterial attachment to the surface is reversible and occurs quickly whilst the latter is permanent and takes place over a longer period of time. Upon reaching a certain density in the bacterial community, quorum sensing causes phenotypical changes leading to a loss in motility and the production of EPS. This position paper seeks to address the problem of bacterial adhesion and biofilm formation for the medical surfaces by comparing inhabiting physicochemical interactions and biological mechanisms. Several physiochemical methodologies (e.g. ultrasonication, alternating magnetic field and chemical surface coating) and utilizing biological mechanisms (e.g. quorum quenching and EPS degrading enzymes) were suggested. The possible strategical applications of each category were suggested and evaluated to a balanced position to possibly eliminate the adhesion and formation of biofilms on medical-context surfaces.

Diatom-inspired 2D nitric oxide releasing anti-infective porous nanofrustules.

Two-dimensional (2D) nanomaterials (NM) have emerged as promising platforms for antibacterial applications. However, the inherent "flatness" of 2D NM often limits the loading of antimicrobial components needed for synergistic bactericidal actions. Here, inspired by the highly ornamented siliceous frustules of diatoms, we prepared 2D ultrathin (<20 nm) and rigid "nanofrustule" plates via the out-of-plane growth of cetyltrimethylammonium bromide (CTAB) directed silica mesostructures on the surfaces of 2D graphene oxide nanosheets. The nanofrustules were characterized by the presence of mesoporous channels with a pore size of 3 nm and a high specific surface area of 674 m2 g-1. S-nitrosothiol-modification on the silica surfaces enables the development of a novel anti-infective nitric oxide (NO) releasing NO-nanofrustule system. The cage-like mesoporous silica architecture enabled a controlled and sustainable release of NO from the NO-nanofrustules under physiological conditions. The NO-nanofrustules displayed broad antibacterial effects against Staphylococcus aureus and Escherichia coli with a minimum inhibitory concentration of 250 µg ml-1. Mechanistic studies revealed that the antibacterial property of NO-nanofrustules was attained via a unique "capture-and-release" mode-of-action. The first step entailed the capture of the bacteria by the NO-nanofrustules to form micro-aggregates. This was followed by the release of high levels of NO to the captured bacteria to elicit a potent anti-infective effect. In combination with the lack of cytotoxicity in human dermal cells, the 2D hybrid NO-nanofrustules may be utilized to combat wound infections in clinical settings.

3D Printing of Transparent Spinel Ceramics with Transmittance Approaching the Theoretical Limit.

3D printing of transparent ceramics has attracted great attention recently but faces the challenges of low transparency and low printing resolution. Herein, magnesium aluminate spinel transparent ceramics with transmittance reaching 97% of the theoretical limit are successfully fabricated using a stereolithography-based 3D printing method assisted by hot isostatic pressing and the critical factors governing the transparency are revealed. Various transparent spinel lenses and microlattices are printed at a high resolution of ≈100-200 µm. The 3D printed spinel lens demonstrates fairly good optical imaging ability, and the printed spinel diamond microlattices as a transparent photocatalyst support for TiO2 significantly enhance its photocatalytic efficiency compared with its opaque counterparts. Compared with other 3D printed transparent materials such as silica glass or organic polymers, the printed spinel ceramics have the advantages of broad optical window, high hardness, excellent high-temperature stability, and chemical resistance and therefore, have great potential to be used in various optical lenses/windows and photocatalyst supports for application in harsh environments.

Fabrication of Highly Transparent Y2O3 Ceramics with CaO as Sintering Aid.

Highly transparent Y2O3 ceramics were successfully fabricated with CaO as sintering aid. The microstructure evolution, optical transmittance, hardness and thermal conductivity of the Y2O3 ceramics were investigated. It was found that doping a small amount (0.01-0.15 wt.%) of CaO could greatly improve the densification rate of Y2O3. With an optimized CaO dosage of 0.02 wt.% combined with the low temperature vacuum sintering plus hot isostatic pressing (HIP-ing), Y2O3 ceramics with in-line transmittance of 84.87% at 1200 nm and 81.4% at 600 nm were obtained.

Effect of Nano-Titanium Dioxide Contained in Titania-Polyurea Coating on Marina Biofouling and Drag Reduction.

Marine structures often suffer from biofouling, which may lead to macrofouling by marine animals like marine worms and barnacles, weighing down the structures and increasing the drag. This paper analyses the effect of the newly fabricated biological anti-adhesion Titania-Polyurea spray coating, which can effectively reduce biofouling from enriching on the surface. Through the surface characterization, bioassays and micro-channel drag-reduction test, the antibacterial effect caused by the nano-titanium dioxide is systematically studied. Compared to the different weight percentages of nano-TiO2 in the coating system, the photocatalytic activity, riblet surface structure and hydrophobic wettability are supposed to be the key factors to reduce the flow resistance at a drag reduction rate of 3.0% and further enhance the anti-biofouling performance under dark conditions.

Highly Efficient and Stable Hydrogen Production in All pH Range by Two-Dimensional Structured Metal-Doped Tungsten Semicarbides.

Transition-metal-doped tungsten semicarbide nanosheets (M-doped W2C NSs, M=Fe, Co, and Ni) have been synthesized through carburization of the mixture of tungsten trioxide, polyvinylpyrrolidone, and metal dopant. The nanosheets grow directly on the W mesh and have the lateral dimension of several hundreds of nm to a few µm with a thickness of few tens nm. It is demonstrated that the M-doped W2C NSs exhibit superior electrocatalytic activity for hydrogen evolution reaction (HER). Impressively, the Ni-doped W2C NSs (2 at% Ni) with the optimized HER activity show extremely low onset overpotentials of 4, 9, and 19 mV and modest Tafel slopes of 39, 51, and 87 mV dec-1 in acidic (pH=0), neutral (pH=7.2), and basic (pH=14) solutions, respectively, which is close to the commercial Pt/C catalyst. Density functional theory (DFT) calculations also demonstrate that the Gibbs free energy for H adsorption of Ni-W2C is much closer to the optimal value ∆GH⁎ = -0.073 eV as compared to -0.16 eV of W2C. Furthermore, nearly 100% Faradaic efficiency and long-term stability are obtained in those environments. This realization of highly tolerant metal semicarbide catalyst performing on par with commercial Pt/C in all range of pH offers a key step towards industrially electrochemical water splitting.

Electronic and Geometric Structures of Rechargeable Lithium Manganese Sulfate Li2Mn(SO4)2 Cathode.

Here, we report the use of Li2Mn(SO4)2 as a potential energy storage material and describe its route of synthesis and structural characterization over one electrochemical cycle. Li2Mn(SO4)2 is synthesized by ball milling of MnSO4·H2O and Li2SO4·H2O and characterized using a suite of techniques, in particular, ex situ X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption spectroscopy on the Mn and S K-edges to investigate the electronic and local geometry around the absorbing atoms. The prepared Li2Mn(SO4)2 electrodes undergo electrochemical cycles to different potential points on the charge-discharge curve and are then extracted from the cells at these points for ex situ structural analysis. Analysis of X-ray absorption spectroscopy (both near and fine structure part of the data) data suggests that there are minimal changes to the oxidation state of Mn and S ions during charge-discharge cycles. However, X-ray photoelectron spectroscopy analysis suggests that there are changes in the oxidation state of Mn, which appears to be different from the conclusion drawn from X-ray absorption spectroscopy. This difference in results during cycling can thus be attributed to electrochemical reactions being dominant at the surface of the Li2Mn(SO4)2 particles rather than in the bulk.

Characteristics of incineration ash for sustainable treatment and reutilization.

Municipal solid waste incineration (MSWI) generates bottom ash, fly ash (FA), and air pollution control (APC) residues as by-products. FA and APC residues are considered hazardous due to the presence of soluble salts and a high concentration of heavy metals, and they should be appropriately treated before disposal. Physicochemical characterization using inductively coupled plasma mass spectroscopy (ICP-MS), X-ray diffraction (XRD), and X-ray fluorescence (XRF) have shown that FA and APC have potential for reuse after treatment as these contain CaO, SiO2, and Al2O3. Studies conducted on treatment of FA and APC are categorized into three groups: (i) separation processes, (ii) solidification/stabilization (S/S) processes, and (iii) thermal processes. Separation processes such as washing, leaching, and electrochemical treatment improve the quality and homogeneity of the ash. S/S processes such as chemical stabilization, accelerate carbonation, and cement solidification modify hazardous species into less toxic constituents. Thermal processes such as sintering, vitrification, and melting are effective at reducing volume and producing a more stable product. In this review paper, the treatment processes are analyzed in relation to ash characteristics. Issues concerning mixing FA and APC residues before treatment, true treatment costs, and challenges are also discussed to provide further insights on the implications and possibilities of utilizing FA and APC as secondary materials.