In situ construction of NiCo-layered double hydroxide nanobranches with adjustable layer spacing on micro-sized carbon plate for high-performance supercapacitors.

Binary layered double hydroxides (LDHs) are an emerging class of materials for supercapacitors owing to their tunable topological structure and excellent theoretical energy storage capacity. However, aggregation and restacking cause a decrease in the interlayer distance of LDHs, resulting in a considerable drop in real specific capacitance. To address this, large-sized anions are intercalated into the interlayer space. Herein, we constructed 3D top-tangled NiCo-LDH nanobranches in situ on a biomass micro-sized carbon plate (CP). By varying the amount of benzene-1,4-dicarboxylic acid (BDC), we prepared a BDC-intercalated CP/NiCo-LDH composite material with adjustable interlayer spacing. Remarkably, the CP/NiCo-LDH-BDC(0.03) composite exhibited excellent electrochemical properties (1530 F g-1/212.5 mAh/g at 1 A/g). It retained 88.36 % capacity after 5000 charge-discharge cycles. The constructed CP/NiCo-LDH-BDC(0.03)//CP asymmetric supercapacitor showed excellent gravimetric capacitance (123 F g-1/54.7 mAh/g at 1 A/g) and energy density (43.7 Wh kg-1 at 800 W kg-1). Furthermore, two asymmetric capacitors connected in series powered a small lightbulb for 2 min, even in a bent state. These findings show that the fabricated CP and CP/NiCo-LDH-BDC(0.03) electrode materials can be applied in flexible and wearable energy storage systems.

Cu2S/C@NiMnCe-layered double hydroxide with core-shell rods array structure as the cathode for high performance supercapacitors.

The selection of highly efficient materials and the construction of advantageous structures are essential for realizing high-performance electrode materials. In this paper, electrode material Cu2S/C@NiMnCe-LDH/CF with excellent morphology and high performance has been successfully designed and prepared by simple hydrothermal and calcination techniques. First, ZIF-67 is loaded on the outer layer of Cu2S rods to obtain core-shell structured Cu2S@ZIF-67 rods, whose ZIF-67 MOF shell is carbonized to obtain Cu2S@C rods. Then, NiMnCe-LDH are epitaxially loaded on the outer layer of Cu2S@C to obtain Cu2S/C@NiMnCe-LDH rods. At a current density of 2 mA cm-2, Cu2S/C@NiMnCe-LDH/CF exhibits an area capacitance of 5176.4 mF cm-2. The mass capacitance and the energy density of the Cu2S/C@NiMnCe-LDH/CF//AC asymmetric supercapacitor (ASC) reach 150.82F g-1 at a sweep rate of 0.8 A/g and 53.62 Wh kg-1 at a power density of 639.99 W kg-1, respectively. Meanwhile, after 8000 electrochemical cycles, the specific capacitance of Cu2S/C@NiMnCe-LDH/CF//AC still has a retention rate of 86.32 %, which proves its excellent cycling stability. These results demonstrate a new strategy for the preparation of novel core-shell structured Cu2S/C@NiMnCe-LDH/CF nanocomposite material for electrode materials of energy storage devices with superb performance.

In Situ Construction of NiCoMn-LDH Derived from Zeolitic Imidazolate Framework on Eggshell-Like Carbon Skeleton for High-Performance Flexible Supercapacitors.

Active compounds based on LDH (ternary layered double hydroxide) are considered the perfect supercapacitor electrode materials on account of their superior electrochemical qualities and distinct structural characteristics, and flexible supercapacitors are an ideal option as an energy source for wearable electronics. However, the prevalent aggregation effect of LDH materials results in significantly compromised actual specific capacitance, which limits its broad practical applications. In this research, a 3D eggshell-like interconnected porous carbon (IPC) framework with confinement and isolation capability is designed and synthesized by using glucose as the carbon source to disperse the LDH active material and enhance the conductivity of the composite material. Second, by constructing NiCoMn-LDH nanocage structure based on ZIF-67 (zeolitic imidazolate framework-67) at the nanometer scale the obtained IPC/NiCoMn-LDH electrode material can expose more active sites, which allows to achieve excellent specific capacitance (2236 F g-1/ 310.6 mAh g-1 at 1 A g-1), good rate as well as the desired cycle stability (85.9% of the initial capacitance upon 5000 cycles test). The constructed IPC/NiCoMn-LDH//IPC ASC (asymmetric supercapacitor) exhibits superior capacitive property (135 F g-1/60.1 mAh g-1 at 0.5 A g-1) as well as desired energy density (40 Wh kg-1 at 800 W kg-1).

In Situ Generation of Vertically Crossed P-Cu3Se2 Ultrathin Nanosheets Derived from Cu2S Nanorod Arrays for High-Performance Supercapacitors.

Transition-metal selenides (TMSs) have great potential in the synthesis of supercapacitor electrode materials due to their rich content and high specific capacity. However, the aggregation phenomenon of TMS materials in the process of charging and discharging will cause capacity attenuation, which seriously affects the service life and practical applications. Therefore, it is of great practical significance to design simple and efficient synthesis strategies to overcome these shortcomings. Hence, P-doped Cu3Se2 nanosheets are loaded on vertically aligned Cu2S nanorod arrays to synthesize CF/Cu2S@Cu3Se2/P nanocomposites with a unique core-shell heterostructure. Notably, the Cu2S precursors can be rapidly converted into Cu3Se2 nanorod arrays in situ in just 30 min at room temperature. The unique core-shell heterostructure effectively avoids the aggregation phenomenon, and the doped P elements further enhance the electrochemical properties of the electrode materials. Therefore, the as-prepared CF/Cu2S@Cu3Se2/P electrode exhibits a high areal capacitance of 5054 mF cm-2 (1099 C g-1) at 3 mA cm-2 and still retains 90.2% capacitance after 10 000 galvanostatic charge-discharge (GCD) cycles. The asymmetric supercapacitor (ASC) device assembled from synthetic CF/Cu2S@Cu3Se2/P and activated carbon (AC) possesses an energy density of 41.1 Wh kg-1 at a power density of 480.4 W kg-1. This work shows that the designed CF/Cu2S@Cu3Se2/P electrode has broad application prospects in the field of electrochemical energy storage.