RESUMO
OBJECTIVE: The study answers the PECO question: "In adults with dental implants (P), do subjects suffering from type-2 diabetes or prediabetes (E) have worse peri-implant conditions (O) than subjects without type-2 diabetes and prediabetes (C)?". Prediabetes (5.7-6.4 % HbA1c), and the different qualities of glycemic control in type-2 diabetes; well-controlled (>8 % HbA1c), and poorly controlled (>8 % HbA1c) individuals; were classified according to the recommendations of the American Diabetes Association. DATA: Predefined search keys were used with search terms including: Dental implant, diabetes mellitus, glycemic control and HbA1c. SOURCES: An electronic search in the MEDLINE, Embase, and Cochrane libraries were conducted without any filters or language restrictions. Additionally, manual search of the reference lists were carried out to identify all relevant articles. STUDY SELECTION: Eligibility criteria were cohort, case-control and cross-sectional studies that answerd our PECO question with at least 1 year of follow-up. From a total of 2660 records, 35 articles (1761 individuals) were included in the analysis. Meta-analytic difference in means for crestal bone loss was 1.2 mm [95 % CI=0.4; 2.1] in patients with prediabetes, 1.8 mm [CI=1.0; 2.7] in poorly controlled patients, whereas 0.4 mm [CI=-0.3; 1.1] in well-controlled individuals. Meta-regression showed that 1 % increase in HbA1c increased crestal bone loss by 0.24 mm. CONCLUSIONS: Within the limitations of the study, patients with poorly controlled type-2 diabetes or prediabetes may have worse peri-implant conditions compared to patients without diabetes and well-controlled type-2 diabetes. Well-controlled type-2 diabetes is not a risk indicator for peri-implant diseases. CLINICAL SIGNIFICANCE: Clinicians should measure blood HbA1c levels when planning implant-supported restorations, thus patients with undiagnosed or poorly controlled type-2 diabetes can be identified, that allows for glycemic level adjustment prior to dental implant surgery, ensuring peri-implant health. PROTOCOL REGISTRATION NUMBER: (CRD42022375263).
Assuntos
Implantes Dentários , Diabetes Mellitus Tipo 2 , Hemoglobinas Glicadas , Estado Pré-Diabético , Humanos , Diabetes Mellitus Tipo 2/complicações , Diabetes Mellitus Tipo 2/sangue , Estado Pré-Diabético/sangue , Implantes Dentários/efeitos adversos , Hemoglobinas Glicadas/análise , Fatores de Risco , Peri-Implantite/etiologia , Controle GlicêmicoRESUMO
OBJECTIVES: To assess the impact of including the palate and the number of images recorded during intraoral digital scanning procedure on the accuracy of complete arch scans. METHODS: An experienced operator conducted 40 digital scans of a 3D printed maxillary model and divided them into two groups: 20 with inclusion of the palate (PAL) and 20 without (NPAL). Each set of scans was performed using an intraoral scanner (IOS) (Trios 5; 3Shape A/S; Copenhagen, Denmark). The resulting STL files were imported into the Geomagic Control X software (3D Systems, Rock Hill, SC, USA) for accuracy comparison. A reference STL file was created using a 3Shape E3 laboratory scanner (3Shape Scanlt Dental 2.2.1.0; Copenhagen, Denmark). The number of images captured was recorded during the scanning procedure. RESULTS: In the case of the right side no statistically significant difference in trueness was detected (84 µm ± 45.6 for PAL and 80.4 ± 40.4 µm for NPAL). In the case of the left side no significant difference in trueness was observed (215.1 ± 70.2 µm for PAL and 233.9 ± 70.7 µm for NPAL). In the case of the arch distortion a statistically significant difference in trueness was seen between the two types of scans (135.3 ± 71.9 µm for PAL and 380.4 ± 255.1 µm for NPAL). The average number of images was 831.25, and 593.8 for PAL and NPAL, respectively. CONCLUSIONS: Scanning of the palatal area can significantly improve the accuracy of dental scans in cases of complete arches. In terms of the number of images, based on the current results, obvious conclusions could not be drawn, and further investigation is required. CLINICAL SIGNIFICANCE: Scanning the palate may be beneficial for improving the accuracy of intraoral scans in dentate patients. Consequently, this should be linked to an appropriate scanning strategy that predicts palatal scanning.
Assuntos
Arco Dental , Técnica de Moldagem Odontológica , Maxila , Modelos Dentários , Palato , Humanos , Palato/diagnóstico por imagem , Palato/anatomia & histologia , Arco Dental/diagnóstico por imagem , Arco Dental/anatomia & histologia , Maxila/diagnóstico por imagem , Maxila/anatomia & histologia , Processamento de Imagem Assistida por Computador/métodos , Desenho Assistido por Computador , Imageamento Tridimensional/métodos , Software , Impressão Tridimensional , Técnicas In Vitro , Materiais para Moldagem OdontológicaRESUMO
We conducted a meta-analysis and systematic review to investigate the efficacy of chitosan-containing chewing gums, and to test their inhibitory effects on Streptococcus mutans. The systematic search was performed in three databases (Cochrane Library, EMBASE, and PubMed) and included English-language randomized-controlled trials to compare the efficacy of chitosan in reducing the number of S. mutans. To assess the certainty of evidence, the GRADE tool was used. Mean differences were calculated with a 95% confidence interval for one outcome: bacterial counts in CFU/mL. The protocol of the study was registered on PROSPERO, registration number CRD42022365006. Articles were downloaded (n = 6758) from EMBASE (n = 2255), PubMed (n = 1516), and Cochrane (n = 2987). After the selection process, a total of four articles were included in the qualitative synthesis and three in the quantitative synthesis. Our results show that chitosan reduced the number of bacteria. The difference in mean quantity was -4.68 × 105. The interval of the random-effects model was [-2.15 × 106; 1.21 × 106] and the prediction interval was [1.03 × 107; 9.40 × 106]. The I2 value was 98% (p = 0.35), which indicates a high degree of heterogeneity. Chitosan has some antibacterial effects when used as a component of chewing gum, but further studies are needed. It can be a promising antimicrobial agent for prevention.
Assuntos
Anti-Infecciosos , Quitosana , Cárie Dentária , Humanos , Streptococcus mutans , Saliva/microbiologia , Quitosana/farmacologia , Anti-Infecciosos/farmacologia , Antibacterianos/farmacologia , Goma de MascarRESUMO
BACKGROUND: The appearance of intraoral scanners (IOSs) in dental offices was an important milestones for the digital innovations in dentistry. Knowing the learning curve for intraoral scanning is crucial, because it can serve as a guideline for clinicians before buying a new IOS. The aim of the present in vivo study was to determine the learning curve required by dental students for intraoral scanning with the 3Shape Trios 4 IOS and the CEREC Primescan IOS, based on scanning time. METHODS: A total of 20 dental students with no previous experience in intraoral scanning participated in the present study. 10 students scanned with Trios 4® IOS (TRI) and 10 students took digital impressions with Primescan® IOS (CER). Every student created 15 digital impressions from patients. Prior to taking the impressions, theoretical and practical education was provided. The total scanning time included the upper and lower arches as well as bite registration, for which average values were calculated. Statistical analysis was performed using the Stata package with a mixed-effects generalized least squares regression models. RESULTS: The average total scanning times were the following: TRI - 205 s for the 1st impression, 133.6 s for the 15th, CER - 289.8 s for the 1st impression, 147 s for the 15th. The model-based estimate of the difference between the two in case of TRI was 57.5 s, and in CER was 144.2 s which is a highly significant improvement in both cases (P < 0.0001). The slope of the scanning time vs. learning phase curve gradually approached flatness, and maintained a plateau: TRI - from the 11th measurement and CER - from the 14th measurement onward. CONCLUSIONS: Given the limitations of the present study, we found difference between the learning curve of scanner types which are operate various principle of imaging. In case of the TRI fewer digital impressions (11 repeating) were sufficient to reach the average scanning time of an experienced user than using CER (14 repeating). TRIAL REGISTRATION: The permission for this study was given by the University Ethics Committee of Semmelweis University (SE RKEB number: 184/2022).
Assuntos
Curva de Aprendizado , Projetos de Pesquisa , Humanos , Cintilografia , Escolaridade , EstudantesRESUMO
INTRODUCTION: This article describes the authors' digital workflow-based method for fabricating intraoral occlusal splints, from planning to the evaluation phase. MATERIALS AND METHODS: In our protocol, first, we had a registration phase. This included taking digital impressions, determining the centric relation (CR) position with the deprogrammer Luci Jig, and using the digital facebow for measuring the individual values. The laboratory phase was next, which included planning and manufacturing with a 3D printer. The last phase was delivery, when we checked the stability of the splint and adjusted the occlusal part. RESULT: The average cost is lower for a fully digital splint than for conventional methods. In terms of time, there was also a significant difference between the classic and digital routes. From a dental technical point of view, the execution was much more predictable. The printed material was very rigid and, therefore, fragile. Compared to the analog method, the retention was much weaker. CONCLUSION: The presented method permits time-efficient laboratory production, and may also be performed chairside in a dental office. The technology is perfectly applicable to everyday life. In addition to its many beneficial properties, its negative properties must also be highlighted.
RESUMO
INTRODUCTION: Intraoral scanners (IOS) are continuing to gain popularity in clinical dentistry, replacing the traditional impression-taking and related technology. Despite their increasing importance, there are few data on the utility and usage of IOS amongst dentists. This study investigates the user experience of IOS technology as well as the perceived quality of a variety of IOS used by dental clinicians worldwide. METHODS: An online survey of 1072 dentists was conducted to elicit data on the number of individual IOS used, their accessibility, the maintenance fees, and the programmes used. The first part of the questionnaire included demographic data and related questions, whilst the second part focussed on the specific IOS used by the respondents and the satisfaction with their scanners. RESULTS: We surveyed 1072 respondents from 109 different countries. More than three-quarters of the survey cohort (78.8%) use IOS in their daily work, whilst 21.17% do not. The average number of scanners owned by the respondents was 1.5 (±0.9), and in total, the cohort used 36 different types of IOS. More than one-third (38.6%) of the respondents used computer-aided design (CAD) software as well. As for the frequency of IOS usage, 51.5% used the system on a daily basis, 28.2% did so 2 to 3 times a week, and 10.0% did so once a week. Overall, the top 3 IOS used by the cohort were Medit i700 followed by wireless Medit i700 and Dentsply Sirona Primescan. CONCLUSIONS: This study describes, for the first time, the IOS user experience in an international cohort. More than 75% of the respondents used IOS on a daily basis in their practice, whilst Medit and Dentsply Sirona brands were the most popular scanners amongst the group. It appears that digital impression-taking technology is universal, and digital workflow in dentistry will continue to grow.
Assuntos
Imageamento Tridimensional , Modelos Dentários , Humanos , Técnica de Moldagem Odontológica , Desenho Assistido por Computador , Inquéritos e QuestionáriosRESUMO
BACKGROUND: Medication-related osteonecrosis of the jaw (MRONJ) is a type of jawbone necrosis caused by the use of drugs for some types of cancer and osteoporosis. The current study aimed to evaluate the associations between hyperglycemia and the development of medication-related osteonecrosis of the jaw. METHODS: Our research group investigated data collected between 1 January 2019 and 31 December 2020. A total of 260 patients were selected from the Inpatient Care Unit, Department of Oromaxillofacial Surgery and Stomatology, Semmelweis University. Fasting glucose data were used and included in the study. RESULTS: Approximately 40% of the necrosis group and 21% of the control group presented with hyperglycemia. There was a significant association between hyperglycemia and MRONJ (p < 0.05, p = 0.003). Vascular anomaly and immune dysfunction caused by hyperglycemia can lead to necrosis after tooth extraction. Necrosis is more common in the mandible (75.0%) and in the case of parenteral antiresorptive treatment (intravenous Zoledronate and subcutaneous Denosumab). Hyperglycemia is a more relevant risk factor than bad oral habits (26.7%). CONCLUSIONS: Ischemia is a complication of abnormal glucose levels, a possible risk factor for necrosis development. Hence, uncontrolled or poorly regulated plasma glucose levels can significantly increase the risk of jawbone necrosis after invasive dental or oral surgical interventions.
RESUMO
OBJECTIVE: Computer-aided design (CAD) and computer-aided manufacturing (CAM) technology in dentistry has become noticeably more significant in recent years. The further development of CAD/CAM systems has led to a broader range of applications, more user-friendly operation, and improved accessibility. The present online survey aimed to investigate CAD/CAM technology utilisation amongst Austrian dentists as the first social media pilot study from Europe on this specific topic. MATERIALS AND METHODS: For this purpose, an online survey consisting of 27 questions was created using Google Forms. The questions were divided into 3 sections: general inquiries, questions for CAD/CAM users, and questions for nonusers. The questionnaire was randomly distributed to Austrian dentists via email and social media. A total of 115 responses were submitted. RESULTS: The vast majority of respondents, 52.6% (n = 60), practised as general dentists. Furthermore, a significant proportion of participants specialised in oral surgery, 17.5% (n = 20), and orthodontics, 12.3% (n = 14). Approximately half of the respondents, 51.8% (n = 59), reported having a CAD/CAM device at their current workplace. Amongst the CAD/CAM users, 70.7% (n = 58) believed that CAD/CAM is important in increasing the number of patients visiting the dental practice. In total, 54.2% (n = 26) of nonusers indicated the high initial cost of purchasing a CAD/CAM device as the main reason for not utilising this technology. CONCLUSIONS: CAD/CAM technology appears to have infiltrated the workflow of Austrian dentists with predictions of growing implementation amongst dental practices in the future.
Assuntos
Desenho Assistido por Computador , Planejamento de Prótese Dentária , Humanos , Projetos Piloto , Áustria , Tecnologia , OdontólogosRESUMO
The aim of this review is to evaluate the possibility of delivering a silver-acid complex via a Trojan-horse mechanism for managing periodontits. We theroised that the complex could be an effective treatment option for bacterial inflammatory processes in the oral cavity. Searches were conducted using MEDLINE, Embase, Web of Science Core Collection, and Google Scholar search engines. We also reviewed several reference lists of the included studies or relevant reviews identified by the search. By using Medical Subject Headings (MeSH) terminology, a comprehensive search was performed for the following keywords: silver, folic acid, periodontitis, macrophages, Trojan-horse mechanism, toxicity, and targeting. Using the keywords mentioned earlier, we selected 110 articles and after appropriate elimination the review was written based on 37 papers. Accordingly the we noted that silver isons were an effective approach to kill oral pathogens. Secondly the Trojan-horse mechanism. could be used by macrophages (as the Trojan horse) to deliver silver ions in large quantities to the inflammatory focus to kill the periodontopathogens. The Trojan-horse mechanism has never been described in the field of dentistry before. The proposed novel approach using the principle of Trojan Horse delivery of drugs/chemicals could be used to manage oral inflammatory conditions. This method can be used to supplement regular treatments.
Assuntos
Periodontite , Prata , Humanos , Prata/uso terapêutico , Sistemas de Liberação de Medicamentos , Ferramenta de Busca , Periodontite/tratamento farmacológicoRESUMO
OBJECTIVES: The gingiva epithelium accounts for a significant proportion of the surface around the tooth. An inflammatory reaction occurs in the presence of bacterial biofilm, adhesion is reduced, and the depth of the sulcus gingivalis increases. The most common antiseptic agents in oral rinses are chlorhexidine digluconate (CHX) and cetylpyridinium chloride. We examined long-lasting effects of residual concentrations of eight commercially available rinses. Our main goals were (i) to analyze the effect of different chemical compositions on cell proliferation, (ii) to examine apoptosis, and (iii) cell morphology on human epithelial progenitor cell line (HGEPp). MATERIALS AND METHODS: Cell proliferation was measured in a real-time system (0-48 h) by impedimetry (xCELLigence). Apoptosis was measured with labeled Annexin-V (BD-FACScalibur). RESULTS: Changes in proliferation were measured at certain concentrations: (i) H2O2 proved to be cytotoxic at almost all concentrations; (ii) low concentrations of CHX (0.0001%; 0.0003%) were proliferation inducers, while higher concentrations were cytotoxic; (iii) for ClO2, advantageous proliferative effect was observed over a broad concentration range (0.06-6 ppm). In mouthwashes, additives in the formulation (e.g., allantoin) appeared to influence cellular responses positively. Apoptosis marker assay results suggested a low-level activation by the tested agents. CONCLUSIONS: Mouthwashes and their reference compounds proved to have concentration-dependent cytotoxic effects on human gingival epithelial cells. CLINICAL RELEVANCE: A better understanding of the effects of mouthwashes and their reference compounds is particularly important. These concentration-dependent effects (cytotoxic or proliferation inducing) interfere with human cells physiology while being used in the fight against the pathogenic flora.
Assuntos
Anti-Infecciosos Locais , Antissépticos Bucais , Anti-Infecciosos Locais/farmacologia , Clorexidina/farmacologia , Gengiva , Humanos , Peróxido de Hidrogênio/farmacologia , Antissépticos Bucais/farmacologia , Células-TroncoRESUMO
BACKGROUND: 3D printing is a rapidly developing technology in the healthcare industry and in dentistry. Its application clearly shows that this area of digital dentistry has potential for everyday usage across all fields, including prosthodontics, orthodontics, maxillofacial surgery, and oral implantology. However, despite gaining ground, there is a lack of information about how specialists (dentists and dental technicians) use additive technology. Our research group aimed to investigate the impact of social media on additive manufacturing technology among dental specialists and their everyday usage of 3D printing. METHODS: This paper investigated specialists' everyday usage of 3D printers via an online survey (Google Forms). The survey questions aimed to discover the number of 3D printers used, the accessibility of the devices, the annual cost, and the design programs. Since specialists tend to build online communities on social media, we circulated our study questionnaire using our profiles on LinkedIn, Facebook, and Instagram platforms during our research. RESULTS: A total of 120 responses were received from 20 countries, with the most significant numbers being from Hungary 23.7% (n = 27), the United States 18.4% (n = 21), and the United Kingdom 7.9% (n = 9). Most of the participants were dentists (n = 68) or dental technicians (n = 29), but some CAD/CAM specialists (n = 23) also completed our survey. The participants had an average of 3.8 years (±0.7) of experience in the 3D printing field, and owned a total of 405 printing devices (3.6 on average/person). CONCLUSIONS: The impact of social media on this research field is growing increasingly. Hence, we support specialists in joining virtual communities on professional platforms. This article intended to provide a practical overview, feedback, and direction for dentists interested in 3D printing technology. From our survey, we can conclude that additive technology is broadening dental applications and the services that we can provide for our patients.
Assuntos
Mídias Sociais , Cirurgia Bucal , Desenho Assistido por Computador , Pesquisas sobre Atenção à Saúde , Humanos , Impressão Tridimensional , ProstodontiaRESUMO
Poly(ethyleneimine) (PEI) is a weakly basic, synthetic, polycationic polymer, due to the presence of primary, secondary, and tertiary amino groups. The amino groups are responsible for the variety of applications of PEI (e.g., transfection, bioimaging, solar cell, etc.). Our study presents some new and reproducible methods for the quantification of molecular or mass concentration of highly branched PEI of different molecular weights (800-2000-25,000-750,000 MW PEI). In the course of the direct method, spectrophotometry and fluorometry were applied to determine the absorption and fluorescence of PEI dilution series. An increase in the MW at the same concentration produces a higher count number because of the higher number of amino groups in PEI molecules. The character of increment in fluorescence intensity is essentially different in the case of mass concentrations and molar concentrations. The increment of the fluorescence intensity related to the molar concentration is non-linear. In the case of mass concentration, the slope is linear. Moreover, their fluorescence is enhanced with the decrease in pH values. The spectrophotometry is a reliable method for measuring the quantity of PEI molecules in solution. Our data help in recognizing the detailed properties of PEI in dendrimer research.
Assuntos
Dendrímeros/química , Fluorescência , Polietilenoimina/química , Aziridinas/química , Cátions/química , Concentração de Íons de Hidrogênio , Peso Molecular , Polímeros/químicaRESUMO
In the past years antibacterial and antifungal polymers had become the focus of medical research. Polyethylenimine (PEI) and poliamidoamin had been proven the most effective polymers. The data shown in this short review discuss the chemical structure, pharmacological effects and medical use of PEI. Report in the international literature only gives examples of experimental dental appliance of PEI in sealers and filling materials. Because of the growing interest in the subject of PEI we find it important to inform the domestic dental society of cationic polymers.