RESUMO
BACKGROUND: Advances in digital radiography for both intraoral and panoramic imaging and cone-beam computed tomography have led the way to an increase in diagnostic capabilities for the dental care profession. In this article, the authors provide information on 4 emerging technologies with promise. TYPES OF STUDIES REVIEWED: The authors feature the following: artificial intelligence in the form of deep learning using convolutional neural networks, dental magnetic resonance imaging, stationary intraoral tomosynthesis, and second-generation cone-beam computed tomography sources based on carbon nanotube technology and multispectral imaging. The authors review and summarize articles featuring these technologies. RESULTS: The history and background of these emerging technologies are previewed along with their development and potential impact on the practice of dental diagnostic imaging. The authors conclude that these emerging technologies have the potential to have a substantial influence on the practice of dentistry as these systems mature. The degree of influence most likely will vary, with artificial intelligence being the most influential of the 4. CONCLUSIONS AND PRACTICAL IMPLICATIONS: The readers are informed about these emerging technologies and the potential effects on their practice going forward, giving them information on which to base decisions on adopting 1 or more of these technologies. The 4 technologies reviewed in this article have the potential to improve imaging diagnostics in dentistry thereby leading to better patient care and heightened professional satisfaction.
Assuntos
Inteligência Artificial , Odontologia , Diagnóstico por Imagem , Humanos , Tomografia Computadorizada de Feixe Cônico/métodos , Odontologia/tendências , Odontologia/métodos , Diagnóstico por Imagem/métodos , Diagnóstico por Imagem/tendências , Previsões , Imageamento por Ressonância Magnética/métodos , Radiografia Dentária Digital/métodos , Tecnologia Odontológica/tendênciasRESUMO
INTRODUCTION: Vertical root fracture (VRF) in root-canal-treated teeth frequently results in tooth loss, partly because VRFs are difficult to diagnose and when detected the fracture is often beyond the point of preservation with surgical intervention. Nonionizing magnetic resonance imaging (MRI) has demonstrated the ability to detect small VRFs, but it is unknown how its diagnostic capabilities compare with the current imaging standard for VRF detection, cone-beam computed tomography (CBCT). This investigation aimed to compare the sensitivity and specificity between MRI and CBCT for detecting VRF, using micro-computed tomography (microCT) as a reference. METHODS: A total of 120 extracted human tooth roots were root canal treated using common techniques, and VRFs were mechanically induced in a proportion. Samples were imaged using MRI, CBCT, and microCT. Axial MRI and CBCT images were examined by 3 board-certified endodontists, who evaluated VRF status (yes/no) and gave a confidence assessment for that decision, from which a receiver operating characteristic curve was generated. Intra- and inter-rater reliability were calculated, sensitivity and specificity, and area under the curve. RESULTS: Intra-rater reliability was 0.29-0.48 for MRI and 0.30-0.44 for CBCT. Inter-rater reliability for MRI was 0.37 and for CBCT 0.49. Sensitivity was 0.66 (95% confidence interval [CI], 0.53-0.78) and 0.58 (95% CI, 0.45-0.70), and specificity 0.72 (95% CI, 0.58-0.83) and 0.87 (95% CI, 0.75-0.95) for MRI and CBCT, respectively. Area under the curve was 0.74 (95% CI, 0.65-0.83) for MRI and 0.75 (95% CI, 0.66-0.84) for CBCT. CONCLUSIONS: There was no significant difference in sensitivity or specificity between MRI and CBCT in detecting VRF, despite the early-stage development of MRI.
Assuntos
Tomografia Computadorizada de Feixe Cônico Espiral , Fraturas dos Dentes , Humanos , Microtomografia por Raio-X , Fraturas dos Dentes/diagnóstico por imagem , Raiz Dentária/diagnóstico por imagem , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Tomografia Computadorizada de Feixe Cônico/métodos , Imageamento por Ressonância MagnéticaRESUMO
INTRODUCTION: Vertical root fracture (VRF) in root canal-treated (RCT) teeth is a common cause of pain, bone resorption, and tooth loss. VRF is also difficult to diagnose and measure. Magnetic resonance imaging (MRI) has the potential to identify VRF due to beneficial partial volume averaging, without using ionizing radiation. This investigation aimed to describe the narrowest VRFs detectable based on MRI, using micro-computed tomography (microCT) as the reference standard and proposes a method using profile integrals to measure the widths of small VRFs. METHODS: VRFs were induced in 62 RCT tooth root samples. All samples were imaged in a phantom using MRI and reference imaging was obtained using microCT. The stacks of 3-dimensional axial MRIs were assessed by 3 board-certified endodontists. Evaluators determined the most coronal slice within the stack that was discernible as the extent of the VRF. This slice was measured on correlated microCT sections to determine the minimum VRF width (µm) detectable using a profile integral-based method to measure small fractures and negate the effects of the point spread function. RESULTS: Using profile integrals to measure VRF width was repeatable and resulted in estimates that were on average 1 µm smaller than known reference widths. Adjusted median VRF width detected using MRI was 45 µm (first quartile: 26 µm, third quartile: 64 µm). CONCLUSION: Using profile integrals is a valid way to estimate small VRF width. The MRI approach demonstrated ability to repeatedly detect VRFs as small as 26 µm.
Assuntos
Fraturas dos Dentes , Dente não Vital , Humanos , Tomografia Computadorizada de Feixe Cônico , Fraturas dos Dentes/diagnóstico por imagem , Fraturas dos Dentes/patologia , Raiz Dentária/diagnóstico por imagem , Raiz Dentária/patologia , Imageamento por Ressonância Magnética , Tratamento do Canal Radicular , Dente não Vital/diagnóstico por imagemRESUMO
The aim of this study was to measure the initial and remaining dentin thickness in the danger zone of the second mesiobuccal (MB2) canal of maxillary first molars after rotary instrumentation using cone beam computed tomography (CBCT) imaging. After determining initial dentin thickness, each sample was subjected to a standardized protocol of rotary instrumentation files: ProTaper Gold Sx Orifice Opener (maximum depth of 7 mm); Vortex Blue 15.04, 20.04, 25.04, ProTaper Gold S1, S2, F1, F2, and finally Vortex Blue 30.06. Subsequent CBCT measurements were made to compare changes in remaining dentin thickness in comparison to initial presentation. Preoperative dentin thickness in the danger zone had a mean of 0.82 ± 0.17mm. Significant levels of dentin removal in the danger zone were noted after all instrumentation groups when compared to the pre-instrumentation mean (Sx P < 0.001, 25.04 P < 0.0006, F2 P < 0.0001, 30.06 P < 0.0001). It was concluded that a thin area of dentin exists along the distal wall of the MB2 (danger zone) from the furcation to 4 mm apically.
Assuntos
Cavidade Pulpar , Dente Molar , Tomografia Computadorizada de Feixe Cônico/métodos , Cavidade Pulpar/diagnóstico por imagem , Dentina/diagnóstico por imagem , Ouro , Dente Molar/diagnóstico por imagem , Dente Molar/cirurgiaRESUMO
This study aimed at quantifying the annual transverse growth of the maxilla using skeletal landmarks in three different regions on cone-beam computed tomography (CBCT) scans. CBCT scans taken before and after orthodontic treatment of 100 child and adolescent patients (50 male, 50 female) without maxillary transverse deficiencies were used to determine the transverse linear distances between the greater palatine foramina (GPFd), the lateral walls of the nasal cavity (NCd), and the infraorbital foramina (IOFd). We found that all distances increased significantly with growth in both genders (p < 0.001). The overall average annual change was 0.5 mm for GPFd, 0.3 mm for NCd, and 0.7 mm for IOFd. Males generally had greater annual changes than females for GPFd and IOFd, but not NCd. There were weak, statistically not significant (p > 0.05) correlations between patient age and the annual changes in GPFd, NCd, and IOFd. These results suggest that the positions of the greater palatine foramina, the lateral walls of the nasal cavity, and the infraorbital foramina change consistently with maxillary transverse growth. Clinicians can use the growth rates as population averages to more confidently estimate the amount of skeletal transverse deficiency or evaluate the long-term effects of maxillary expansion treatment.
RESUMO
OBJECTIVES: A practical approach to three-dimensional (3D) intraoral imaging would have many potential applications in clinical dentistry. Stationary intraoral tomosynthesis (sIOT) is an experimental 3D imaging technology that holds promise. The purpose of this study was to explore synthetic radiography as a tool to improve the clinical utility of the images generated by an sIOT scan. METHODS: Extracted tooth specimens containing either caries adjacent to restorations (CAR) or vertical root fractures (VRF) were imaged by sIOT and standard dental radiography devices. Qualitative assessments were used to compare the conspicuity of these pathologies in the standard radiographs and in a set of multi-view synthetic radiographs generated from the information collected by sIOT. RESULTS: The sIOT-based synthetic 2D radiographs contained less artefact than the image slices in the reconstructed 3D stack, which is the conventional approach to displaying information from a tomosynthesis scan. As a single sIOT scan can be used to generate synthetic radiographs from multiple viewing angles, the interproximal space was less likely to be obscured in the synthetic images compared to the standard radiograph. Additionally, the multi-view synthetic radiographs can potentially improve the display of CAR and VRFs as compared to a single standard radiograph. CONCLUSIONS: This preliminary experience combining synthetic radiography and sIOT in extracted tooth models is encouraging and supports the ongoing study of this promising approach to 3D intraoral imaging with many potential applications.
Assuntos
Cárie Dentária , Imageamento Tridimensional , Cárie Dentária/diagnóstico por imagem , Clínicas Odontológicas , Humanos , Intensificação de Imagem Radiográfica , Radiografia , Radiografia DentáriaRESUMO
OBJECTIVES: To assess factors that may be associated with buccal bone changes adjacent to maxillary first molars after rapid maxillary expansion (RME) and fixed appliance therapy. MATERIALS AND METHODS: Pretreatment (T1) and posttreatment (T2) cone-beam computed tomography scans were obtained from 45 patients treated with RME and preadjusted edgewise appliances. Buccal alveolar bone thickness was measured adjacent to the mesiobuccal root of the maxillary first molar 4 mm, 6 mm, and 8 mm apical to the cementoenamel junction, and anatomic defects were recorded. Paired and unpaired t-tests were used to compare alveolar bone thickness at T1 and T2 and to determine whether teeth with posttreatment anatomic defects had thinner initial bone. Correlation analyses were used to examine relationships between buccal alveolar bone thickness changes and amount of expansion, initial bone thickness, age at T1, postexpansion retention time, and treatment time. RESULTS: There was a statistically significant reduction in buccal alveolar bone thickness from T1 to T2. Approximately half (47.7%) of the teeth developed anatomic defects from T1 to T2. These teeth had significantly thinner buccal bone at T1. Reduction in alveolar bone thickness was correlated with only one tested variable: initial bone thickness. CONCLUSIONS: RME and fixed-appliance therapy can be associated with significant reduction in buccal alveolar bone thickness and an increase in anatomic defects adjacent to the expander anchor teeth. Anchor teeth with greater initial buccal bone thickness have less reduction in buccal bone thickness and are less likely to develop posttreatment anatomic defects of buccal bone.
Assuntos
Maxila , Técnica de Expansão Palatina , Tomografia Computadorizada de Feixe Cônico , Humanos , Lactente , Maxila/diagnóstico por imagem , Aparelhos Ortodônticos Fixos , ZigomaRESUMO
INTRODUCTION: Magnetic resonance imaging (MRI) has the potential to aid in determining the presence and extent of cracks/fractures in teeth because of better contrast without ionizing radiation. The objectives were to develop MRI criteria for root crack/fracture identification and to establish reliability and accuracy in their detection. METHODS: MRI-based criteria for crack/fracture appearance was developed by an MRI physicist and a panel of 6 dentists. Twenty-nine human adult teeth previously extracted after a clinical diagnosis of a root crack/fracture were frequency matched to 29 controls. Samples were scanned using an in vivo MRI protocol and the reference standard (ie, ex vivo limited field of view cone-beam computed tomographic [CBCT] imaging). A blinded, 4-member panel evaluated the images with a proportion randomly retested to establish intrarater reliability. Overall observer agreement, sensitivity, and specificity were computed for each imaging modality. RESULTS: Subjectively, MRI has increased crack/fracture contrast and is less prone to artifacts from radiodense materials relative to CBCT imaging. Intrarater reliability for MRI was fair to excellent (κ = 0.38-1.00), and for CBCT imaging, it was moderate to excellent (κ = 0.66-1.00). Sensitivity for MRI was 0.59 (95% confidence interval [CI], 0.39-0.76; P = .46), and for CBCT imaging, it was 0.59 (95% CI, 0.59-0.76; P = .46). Specificity for MRI was 0.83 (95% CI, 0.64-0.94; P < .01), and for CBCT imaging, it was 0.90 (95% CI, 0.73-0.98; P < .01). CONCLUSIONS: Despite advantages of increased contrast and the absence of artifacts from radiodense materials in MRI, comparable measures of sensitivity and specificity (to limited field of view CBCT imaging) suggest MRI quality improvements are needed, specifically in image acquisition and postprocessing parameters. Given the early stage of technology development, there may be a use for MRI in detecting cracks/fractures in teeth.
Assuntos
Imageamento por Ressonância Magnética , Fraturas dos Dentes , Adulto , Tomografia Computadorizada de Feixe Cônico , Humanos , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Fraturas dos Dentes/diagnóstico por imagem , Raiz Dentária/diagnóstico por imagemRESUMO
PURPOSE: Technological advancements in dental radiography have improved oral care on many fronts, yet diagnostic efficacy for some of the most common oral conditions, such as caries, dental cracks and fractures, and periodontal disease, remains relatively low. Driven by the clinical need for a better diagnostic yield for these and other dental conditions, we initiated the development of a stationary intraoral tomosynthesis (s-IOT) imaging system using carbon nanotube (CNT) x-ray source array technology. Here, we report the system characterization and preliminary imaging evaluation of a clinical prototype s-IOT system approved for human use. METHODS: The clinical prototype s-IOT system is comprised of a multibeam CNT x-ray source array, high voltage generator, control electronics, collimator cone, and dynamic digital intraoral detector. During a tomosynthesis scan, each x-ray source is operated sequentially at fixed, nominal tube current of 7 mA and user-specified pulse width. Images are acquired by a digital intraoral detector and the reconstruction algorithm generates slice information in real time for operator review. In this study, the s-IOT system was characterized for tube output, dosimetry, and spatial resolution. Manufacturer specifications were validated, such as tube current, kVp, and pulse width. Tube current was measured with an oscilloscope on the analog output of the anode power supply. Pulse width, kVp, and peak skin dose were measured with a dosimeter with ion chamber and high voltage accessory. In-plane spatial resolution was evaluated via measurement of MTF and imaging of a line pair phantom. Spatial resolution in the depth direction was evaluated via artifact spread measurement. The size of the collimated radiation field was evaluated for compliance with FDA regulations. A dental phantom and human specimens of varying pathologies were imaged on a clinical 2D intraoral imaging system as well as s-IOT for comparison and to explore potential clinical applications. RESULTS: The measured tube current, kVp, and pulse width values were within 3% of the set values. A cumulative peak skin dose of 1.12 mGy was measured for one complete tomosynthesis scan using a 50-ms pulse per projection view. Projection images and reconstruction slices revealed MTF values ranging from 8.1 to 9.3 cycles/mm. Line pair imaging verified this result. The radiation field was found to meet the FDA requirements for intraoral imaging devices. Tomosynthesis reconstruction slice images of the dental phantom and human specimens provided depth resolution, allowing visibility of anatomical features that cannot be seen in the 2D intraoral images. CONCLUSIONS: The clinical prototype s-IOT device was evaluated and found to meet all manufacturer specifications. Though the system capability is higher, initial investigations are targeting a low-dose range comparable to a single 2D radiograph. Preliminary studies indicated that s-IOT provides increased image quality and feature conspicuity at a dose comparable to a single 2D intraoral radiograph.
Assuntos
Boca/diagnóstico por imagem , Tomografia Computadorizada por Raios X/instrumentação , Artefatos , Calibragem , Desenho de Equipamento , Humanos , Processamento de Imagem Assistida por Computador , Nanotubos de Carbono , Imagens de Fantasmas , Dente/diagnóstico por imagemRESUMO
INTRODUCTION: Genetic and environmental etiologic factors have been described for maxillary canine impaction, except for the trabecular bone characteristics in the impacted area. The aim of this study was to evaluate the surface area and fractal dimension of the alveolar bone on cone-beam computed tomography (CBCT) images of patients with maxillary impacted canines. METHODS: The sample comprised preorthodontic treatment CBCT images of 49 participants with maxillary impacted canines (31 unilateral and 18 bilateral). CBCT images were acquired in portrait mode (17 × 23 cm high field of view) at 120 kV, 5 mA, 8.9-seconds exposure time, and 0.3-mm voxel size. Coronal slices (0.3 mm) were obtained from the right and left alveolar processes between the first and second maxillary premolars. We collected 64 × 64-pixel regions of interest between the premolars to assess maxillary bone area and fractal dimension using ImageJ software (National Institutes of Health, Bethesda, Md). Comparisons were made using paired t tests and linear regression. Repeated measurements were obtained randomly from about 20% of the sample. RESULTS: In subjects with unilateral impactions, the maxillary bone area (P = 0.0227) was higher in the impacted side, with a mean difference of 245.5 pixels (SD, 569.2), but the fractal dimension (P = 0.9822) was not, -0.0003 pixels (SD, 0.082). Comparisons of unilateral and bilateral subjects using a general linear mixed model test confirmed the increased bone area in the impacted side (P = 0.1062). The repeated measurements showed similar results. CONCLUSIONS: The maxillary alveolar bone area is increased in the impacted side compared with the nonimpacted side.
Assuntos
Densidade Óssea , Tomografia Computadorizada de Feixe Cônico/métodos , Dente Canino/diagnóstico por imagem , Fractais , Maxila/diagnóstico por imagem , Dente Impactado/diagnóstico por imagem , Feminino , Humanos , Masculino , Interpretação de Imagem Radiográfica Assistida por Computador , Estudos RetrospectivosRESUMO
Imaging of hard and soft tissue of the oral cavity is important for dentistry. However, medical computed tomography, cone beam computed tomography (CBCT), nor MRI enables soft and hard tissue imaging simultaneously. Some MRI sequences were shown to provide fast soft and hard tissue imaging of hydrogen, which increased the interest in dental MRI. Recently, MRI allowed direct visualization of cancellous bone, intraoral mucosa, and dental pulp despite that cortical bone and dental roots are indirectly visualized. MRI seems to be adequate for many indications that CBCT is currently used for: implant treatment and inflammatory diseases of the tooth.
Assuntos
Imageamento por Ressonância Magnética , Tecnologia Odontológica , Osso Esponjoso/diagnóstico por imagem , Osso Cortical/diagnóstico por imagem , Polpa Dentária/diagnóstico por imagem , Humanos , Arcada Osseodentária/diagnóstico por imagem , Imageamento por Ressonância Magnética/economia , Imageamento por Ressonância Magnética/métodos , Mucosa Bucal/diagnóstico por imagem , Software , Tecnologia Odontológica/economia , Tecnologia Odontológica/métodos , Raiz Dentária/diagnóstico por imagemRESUMO
Fibroosseous lesions in the jaws have similar histologic and radiographic features. Despite their similarity, management varies significantly. In this article, common fibroosseous lesions and key radiographic features are described. Many of the fibroosseous lesions are diagnosed radiographically, without performing histologic examinations. For some of the fibroosseous lesions, for example, periapical osseous dysplasia, histologic examination is contraindicated. Cherubism and fibrous dysplasia have specific radiographic findings; these conditions can be diagnosed radiographically. Accurate diagnosis conditions is essential; some conditions do not require any intervention, while others require surgical resection. Patient demographics, for example, age, gender, and race, play important roles in diagnosis.
Assuntos
Fibroma Ossificante/diagnóstico , Cistos Maxilomandibulares/diagnóstico , Doenças Maxilomandibulares/diagnóstico , Anamnese/métodos , Doenças Periapicais/diagnóstico , Exame Físico/métodos , Radiografia Dentária/métodos , Diagnóstico Diferencial , HumanosRESUMO
OBJECTIVES: To evaluate the limit of tooth crack width visualization by two MRI pulse sequences in comparison with CBCT. METHODS: Two extracted human teeth with known crack locations and dimensions, as determined by reference standard microCT, were selected for experimental imaging. Crack location/dimension and the presence of common dental restorative materials such as amalgam were typical of that found clinically. Experimental imaging consisted of conventional CBCT scans and MRI scans with two pulse sequences including Sweep Imaging with Fourier Transformation (SWIFT) and gradient echo (GRE). CBCT and MR images of extracted teeth were acquired using acquisition parameters identical to those used for in vivo imaging. Experimental and reference standard images were registered and the limit of tooth crack visualization was determined. RESULTS: Collected images indicate that SWIFT could demonstrate cracks with 20-µm width, which is 10 times narrower than the imaging voxel size. Cracks of this size were not visible in GRE images, even with a short echo time of 2.75 ms. The CBCT images were distorted by artefacts owing to close location of metallic restorations. CONCLUSIONS: The successful visualization of cracks with the SWIFT MRI sequence compared with other clinical modalities suggests that SWIFT MRI can effectively detect microcracks in teeth and therefore may have potential to be a non-invasive method for the in vivo detection of cracks in human teeth.
Assuntos
Síndrome de Dente Quebrado/diagnóstico por imagem , Imageamento por Ressonância Magnética/métodos , Artefatos , Tomografia Computadorizada de Feixe Cônico/métodos , Amálgama Dentário , Estudos de Viabilidade , Análise de Fourier , Humanos , Aumento da Imagem/métodos , Processamento de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Microtomografia por Raio-X/métodosRESUMO
OBJECTIVES: Proximal dental caries remains a prevalent disease with only modest detection rates by current diagnostic systems. Many new systems are available without controlled validation of diagnostic efficacy. The objective of this study was to evaluate the diagnostic efficacy of three potentially promising new imaging systems. METHODS: This study evaluated the caries detection efficacy of Schick 33 (Sirona Dental, Salzburg, Austria) intraoral digital detector images employing an advanced sharpening filter, Planmeca ProMax(®) (Planmeca Inc., Helsinki, Finland) extraoral "panoramic bitewing" images and Sirona Orthophos XG3D (Sirona Dental) CBCT images with advanced artefact reduction. Conventional photostimulable phosphor images served as the control modality. An ex vivo study design using extracted human teeth, ten expert observers and micro-CT ground truth was employed. RESULTS: Receiver operating characteristic analysis indicated similar diagnostic efficacy of all systems (ANOVA p > 0.05). The sensitivity of the Schick 33 images (0.48) was significantly lower than the other modalities (0.53-0.62). The specificity of the Planmeca images (0.86) was significantly lower than Schick 33 (0.96) and XG3D (0.97). The XG3D showed significantly better cavitation detection sensitivity (0.62) than the other modalities (0.48-0.57). CONCLUSIONS: The Schick 33 images demonstrated reduced caries sensitivity, whereas the Planmeca panoramic bitewing images demonstrated reduced specificity. XG3D with artefact reduction demonstrated elevated sensitivity and specificity for caries detection, improved depth accuracy and substantially improved cavitation detection. Care must be taken to recognize potential false-positive caries lesions with Planmeca panoramic bitewing images. Use of CBCT for caries detection must be carefully balanced with the presence of metal artefacts, time commitment, financial cost and radiation dose.